/* Header: //Mercury/Projects/archives/XFree86/4.0/smi.h-arc 1.51 29 Nov 2000 17:45:16 Frido $ */ /* Copyright (C) 1994-1999 The XFree86 Project, Inc. All Rights Reserved. Copyright (C) 2000 Silicon Motion, Inc. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT- NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the names of the XFree86 Project and Silicon Motion shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the XFree86 Project and Silicon Motion. */ #ifndef _SMI_H #define _SMI_H #include "smi_pcirename.h" #include #include #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Pci.h" #include "xf86Cursor.h" #include "vgaHW.h" #include "compiler.h" #include "mipointer.h" #include "micmap.h" #include "fb.h" #ifdef HAVE_XAA_H #include "xaa.h" #endif #include "xf86fbman.h" #include "exa.h" #include "xf86cmap.h" #include "xf86i2c.h" #include "xf86int10.h" #include "vbe.h" #include "xf86xv.h" #include #include "compat-api.h" /******************************************************************************/ /* D E F I N I T I O N S */ /******************************************************************************/ #define PCI_VENDOR_SMI 0x126F #define PCI_CHIP_SMI910 0x0910 #define PCI_CHIP_SMI810 0x0810 #define PCI_CHIP_SMI820 0x0820 #define PCI_CHIP_SMI710 0x0710 #define PCI_CHIP_SMI712 0x0712 #define PCI_CHIP_SMI720 0x0720 #define PCI_CHIP_SMI731 0x0730 #ifndef SMI_DEBUG #define SMI_DEBUG 0 #endif #define SMI_USE_IMAGE_WRITES 0 #define SMI_USE_VIDEO 1 #define SMI_USE_CAPTURE 1 #define SMI501_CLI_DEBUG 0 /* * Leaving attempt implementation of an argb cursor using alpha plane * for the smi 501/502 under this ifdef for now. Maybe it will be fixed * in a subsequent hardware revision. * The problem is that the alpha plane will only work (that is, become * visible) if alpha_plane_tl is set to top:=0 and left:=0. * Also, if alpha_plane_br does not match panel dimensions, the alpha * plane will be displayed tilled in the "first" row, with corruption on * on all odd columns. * Since setting the alpha fb_address works, to implement an argb cursor * using the alpha plane, with the current hardware bugs, it would be * required to: * o allocate an offscreen area of pSmi->lcdWidth * pSmi->lcdHeight * 2 * o set statically tl/tr to 0,0,pSmi->lcdWidth-1,pSmi->lcdHeight-1 * o use alpha format 3 (argb 4:4:4:4), or alternatively format 1 * (rgb 5:6:5), and in the last case, a global 50% alpha is the * best bet, and for the argb cursors being used at the time of this * writing, they look correct, while 100% opaque looks wrong. * o when positioning the pointer, first erase it from the offscreen * area, then repaint it at the proper offset in the alpha offscreen * area. * .... argb software cursor works way better * (There are some other alternatives, like using 8 bits indexed mode, * but when using a global alpha value, instead of per pixel, most argb * cursors will not look correctly, regardless of the alpha value, that * should be from 50 to 100% transparency). * But still there would be the problem of memory requiring a 128 bit * alignment, what would require either moving the image in the memory, * and/or some trick with the vsync pixel panning. * * Until the alpha layer is corrected in some newer revision (or removed?), * it could be used as something like an alternate crt, that happens to be * on top of the panel (and has 16 transparency levels). */ #define SMI_CURSOR_ALPHA_PLANE 0 /******************************************************************************/ /* S T R U C T U R E S */ /******************************************************************************/ /* Driver data structure; this should contain all needed info for a mode */ typedef struct { CARD16 mode; CARD8 SR17, SR18; CARD8 SR20, SR21, SR22, SR23, SR24; CARD8 SR30, SR31, SR32, SR34; CARD8 SR40, SR41, SR42, SR43, SR44, SR45, SR48, SR49, SR4A, SR4B, SR4C; CARD8 SR50, SR51, SR52, SR53, SR54, SR55, SR56, SR57, SR5A; CARD8 SR66, SR68, SR69, SR6A, SR6B, SR6C, SR6D, SR6E, SR6F; CARD8 SR81, SRA0; CARD8 CR30, CR33, CR33_2, CR3A; CARD8 CR40[14], CR40_2[14]; CARD8 CR90[15], CR9F, CR9F_2; CARD8 CRA0[14]; CARD8 smiDACMask, smiDacRegs[256][3]; CARD8 smiFont[8192]; CARD32 DPR10, DPR1C, DPR20, DPR24, DPR28, DPR2C, DPR30, DPR3C, DPR40, DPR44; CARD32 VPR00, VPR0C, VPR10; CARD32 CPR00; CARD32 FPR00_, FPR0C_, FPR10_; } SMIRegRec, *SMIRegPtr; /* Global PDEV structure. */ typedef struct { int Bpp; /* Bytes per pixel */ int MCLK; /* Memory Clock */ int MXCLK; /* MSOC Clock for local sdram */ ClockRange clockRange; /* Allowed pixel clock range */ CloseScreenProcPtr CloseScreen; /* Pointer used to save wrapped CloseScreen function */ I2CBusPtr I2C; /* Pointer into I2C module */ xf86Int10InfoPtr pInt10; /* Pointer to INT10 module */ vbeInfoPtr pVbe; /* Pointer to VBE module */ pciVideoPtr PciInfo; /* PCI info vars */ #ifndef XSERVER_LIBPCIACCESS PCITAG PciTag; #endif int Chipset; /* Chip info, set using PCI above */ int ChipRev; OptionInfoPtr Options; Bool Dualhead; /* Don't attempt to program a video mode. Use kernel framebuffer * mode instead. */ Bool UseFBDev; /* CSC video uses color space conversion to render video directly to * the framebuffer, without using an overlay. */ Bool CSCVideo; Bool PCIBurst; /* Enable PCI burst mode for reads? */ Bool PCIRetry; /* Enable PCI retries */ Bool HwCursor; /* hardware cursor enabled */ CARD8 DACmask; int vgaCRIndex, vgaCRReg; Bool PrimaryVidMapped; /* Flag indicating if vgaHWMapMem was used successfully for this screen */ Bool ModeStructInit; /* Flag indicating ModeReg has been duped from console state */ /* Hardware state */ void (*Save)(ScrnInfoPtr pScrn); /* Function used to save the current register state */ CARD8 SR18Value; /* PDR#521: original SR18 value */ CARD8 SR21Value; /* PDR#521: original SR21 value */ void *save; /* console saved mode registers */ void *mode; /* XServer video state mode registers */ /* Memory layout */ int videoRAMBytes; /* In units as noted, set in PreInit */ int videoRAMKBytes; /* In units as noted, set in PreInit */ unsigned char * MapBase; /* Base of mapped memory */ int MapSize; /* Size of mapped memory */ CARD8 * DPRBase; /* Base of DPR registers */ CARD8 * VPRBase; /* Base of VPR registers */ CARD8 * CPRBase; /* Base of CPR registers */ CARD8 * FPRBase; /* Base of FPR registers - for 0730 chipset */ CARD8 * DCRBase; /* Base of DCR registers - for 0501 chipset */ CARD8 * SCRBase; /* Base of SCR registers - for 0501 chipset */ CARD8 * DataPortBase; /* Base of data port */ int DataPortSize; /* Size of data port */ CARD8 * IOBase; /* Base of MMIO VGA ports */ unsigned int PIOBase; /* Base of I/O ports */ unsigned char * FBBase; /* Base of FB */ CARD32 fbMapOffset; /* offset for fb mapping */ CARD32 FBOffset; /* Current visual FB starting location */ CARD32 FBCursorOffset; /* Cursor storage location */ CARD32 FBReserved; /* Reserved memory in frame buffer */ /* accel additions */ CARD32 AccelCmd; /* Value for DPR0C */ Bool NoAccel; /* Disable Acceleration */ CARD32 ScissorsLeft; /* Left/top of current scissors */ CARD32 ScissorsRight; /* Right/bottom of current scissors */ Bool ClipTurnedOn; /* Clipping was turned on by the previous command */ int GEResetCnt; /* Limit the number of errors printed using a counter */ Bool useBIOS; /* Use BIOS for mode sets */ #ifdef HAVE_XAA_H XAAInfoRecPtr XAAInfoRec; /* XAA info Rec */ #endif /* EXA */ ExaDriverPtr EXADriverPtr; Bool useEXA; /* enable exa acceleration */ ExaOffscreenArea* fbArea; /* EXA offscreen area used as framebuffer */ PictTransformPtr renderTransform; /* DPMS */ int CurrentDPMS; /* Current DPMS state */ /* Panel information */ Bool lcd; /* LCD active, 1=DSTN, 2=TFT */ int lcdWidth; /* LCD width */ int lcdHeight; /* LCD height */ /* XvExtension */ int videoKey; /* Video chroma key */ Bool ByteSwap; /* Byte swap for ZV port */ Bool interlaced; /* True: Interlaced Video */ XF86VideoAdaptorPtr ptrAdaptor; /* Pointer to VideoAdapter structure */ void (*BlockHandler)(BLOCKHANDLER_ARGS_DECL); #if SMI501_CLI_DEBUG /* SMI 501/502 Command List Interpreter */ Bool batch_active; int64_t *batch_handle; /* Virtual address */ int batch_offset; /* Physical smi 501 address */ int batch_length; /* Length in 8 byte units */ int batch_finish; /* Last finish command offset */ int batch_index; #endif } SMIRec, *SMIPtr; #define SMIPTR(p) ((SMIPtr)((p)->driverPrivate)) /******************************************************************************/ /* M A C R O S */ /******************************************************************************/ #if SMI_DEBUG extern int smi_indent; # define VERBLEV 1 # define ENTER() xf86ErrorFVerb(VERBLEV, "%*c %s\n",\ smi_indent++, '>', __FUNCTION__) # define LEAVE(...) \ do { \ xf86ErrorFVerb(VERBLEV, "%*c %s\n", \ --smi_indent, '<', __FUNCTION__); \ return __VA_ARGS__; \ } while (0) # define DEBUG(...) xf86ErrorFVerb(VERBLEV, __VA_ARGS__) #else # define VERBLEV 4 # define ENTER() /**/ # define LEAVE(...) return __VA_ARGS__ # define DEBUG(...) /**/ #endif /* Some Silicon Motion structs & registers */ #include "regsmi.h" #if !defined (MetroLink) && !defined (VertDebug) #define VerticalRetraceWait() \ do \ { \ if (VGAIN8_INDEX(pSmi, vgaCRIndex, vgaCRData, 0x17) & 0x80) \ { \ while ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x00); \ while ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x08); \ while ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x00); \ } \ } while (0) #else #define SPIN_LIMIT 1000000 #define VerticalRetraceWait() \ do \ { \ if (VGAIN8_INDEX(pSmi, vgaCRIndex, vgaCRData, 0x17) & 0x80) \ { \ volatile unsigned long _spin_me; \ for (_spin_me = SPIN_LIMIT; \ ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x00) && \ _spin_me; \ _spin_me--); \ if (!_spin_me) \ ErrorF("smi: warning: VerticalRetraceWait timed out.\n"); \ for (_spin_me = SPIN_LIMIT; \ ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x08) && \ _spin_me; \ _spin_me--); \ if (!_spin_me) \ ErrorF("smi: warning: VerticalRetraceWait timed out.\n"); \ for (_spin_me = SPIN_LIMIT; \ ((VGAIN8(pSmi, vgaIOBase + 0x0A) & 0x08) == 0x00) && \ _spin_me; \ _spin_me--); \ if (!_spin_me) \ ErrorF("smi: warning: VerticalRetraceWait timed out.\n"); \ } \ } while (0) #endif /******************************************************************************/ /* F U N C T I O N P R O T O T Y P E S */ /******************************************************************************/ /* smi_dac.c */ void SMI_CommonCalcClock(int scrnIndex, long freq, int min_m, int min_n1, int max_n1, int min_n2, int max_n2, long freq_min, long freq_max, unsigned char * mdiv, unsigned char * ndiv); /* smi_i2c */ Bool SMI_I2CInit(ScrnInfoPtr pScrn); /* smi_accel.c */ void SMI_AccelSync(ScrnInfoPtr pScrn); void SMI_GEReset(ScrnInfoPtr pScrn, int from_timeout, int line, char *file); void SMI_EngineReset(ScrnInfoPtr); void SMI_SetClippingRectangle(ScrnInfoPtr, int, int, int, int); void SMI_DisableClipping(ScrnInfoPtr); CARD32 SMI_DEDataFormat(int bpp); /* smi_xaa.c */ Bool SMI_XAAInit(ScreenPtr pScrn); /* smi_exa.c */ Bool SMI_EXAInit(ScreenPtr pScrn); /* smi_hwcurs.c */ Bool SMI_HWCursorInit(ScreenPtr pScrn); /* smi_driver.c */ Bool SMI_MapMem(ScrnInfoPtr pScrn); void SMI_UnmapMem(ScrnInfoPtr pScrn); void SMI_AdjustFrame(ADJUST_FRAME_ARGS_DECL); Bool SMI_SwitchMode(SWITCH_MODE_ARGS_DECL); void SMI_LoadPalette(ScrnInfoPtr pScrn, int numColors, int *indicies, LOCO *colors, VisualPtr pVisual); xf86MonPtr SMI_ddc1(ScrnInfoPtr pScrn); void SMI_PrintRegs(ScrnInfoPtr pScrn); /* smi_video.c */ void SMI_InitVideo(ScreenPtr pScreen); CARD32 SMI_AllocateMemory(ScrnInfoPtr pScrn, void **mem_struct, int size); void SMI_FreeMemory(ScrnInfoPtr pScrn, void *mem_struct); #endif /*_SMI_H*/