diff options
Diffstat (limited to 'vmwarectrl')
| -rw-r--r-- | vmwarectrl/AUTHORS | 1 | ||||
| -rw-r--r-- | vmwarectrl/COPYING | 26 | ||||
| -rw-r--r-- | vmwarectrl/ChangeLog | 8 | ||||
| -rw-r--r-- | vmwarectrl/INSTALL | 229 | ||||
| -rw-r--r-- | vmwarectrl/Makefile.am | 12 | ||||
| -rw-r--r-- | vmwarectrl/NEWS | 4 | ||||
| -rw-r--r-- | vmwarectrl/README | 6 | ||||
| -rwxr-xr-x | vmwarectrl/autogen.sh | 12 | ||||
| -rw-r--r-- | vmwarectrl/configure.ac | 12 |
9 files changed, 8 insertions, 302 deletions
diff --git a/vmwarectrl/AUTHORS b/vmwarectrl/AUTHORS deleted file mode 100644 index 80d256f..0000000 --- a/vmwarectrl/AUTHORS +++ /dev/null @@ -1 +0,0 @@ -Philip Langdale <plangdale@vmware.com> diff --git a/vmwarectrl/COPYING b/vmwarectrl/COPYING deleted file mode 100644 index 6635b04..0000000 --- a/vmwarectrl/COPYING +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2006 by VMware, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Except as contained in this notice, the name of the copyright holder(s) - * and author(s) shall not be used in advertising or otherwise to promote - * the sale, use or other dealings in this Software without prior written - * authorization from the copyright holder(s) and author(s). - */ diff --git a/vmwarectrl/ChangeLog b/vmwarectrl/ChangeLog deleted file mode 100644 index 81a3e5b..0000000 --- a/vmwarectrl/ChangeLog +++ /dev/null @@ -1,8 +0,0 @@ -2006-10-11 Philip Langdale <plangdale@vmware.com> - - * 0.2 Release. - Adds support for VMWARE_CTRL 0.2 - -2006-02-07 Philip Langdale <plangdale@vmware.com> - - * Initial 0.1 Release. diff --git a/vmwarectrl/INSTALL b/vmwarectrl/INSTALL deleted file mode 100644 index 54caf7c..0000000 --- a/vmwarectrl/INSTALL +++ /dev/null @@ -1,229 +0,0 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software -Foundation, Inc. - - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -will cause the specified gcc to be used as the C compiler (unless it is -overridden in the site shell script). - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/vmwarectrl/Makefile.am b/vmwarectrl/Makefile.am index 9df209d..ed19384 100644 --- a/vmwarectrl/Makefile.am +++ b/vmwarectrl/Makefile.am @@ -1,8 +1,12 @@ -## Process this file with automake to produce Makefile.in -AUTOMAKE_OPTIONS = dist-bzip2 +if BUILD_VMWARECTRL bin_PROGRAMS = vmwarectrl + +AM_CPPFLAGS = -I$(top_srcdir)/src +AM_CFLAGS = $(X11_CFLAGS) +AM_LDFLAGS = $(X11_LIBS) + vmwarectrl_SOURCES = vmwarectrl.c libvmwarectrl.c libvmwarectrl.h -vmwarectrl_CPPFLAGS = @X11_CFLAGS@ -I../src/ -vmwarectrl_LDADD = @X11_LIBS@ + +endif BUILD_VMWARECTRL diff --git a/vmwarectrl/NEWS b/vmwarectrl/NEWS deleted file mode 100644 index aac183a..0000000 --- a/vmwarectrl/NEWS +++ /dev/null @@ -1,4 +0,0 @@ -What's new in 0.1 ------------------- - -* Initial release diff --git a/vmwarectrl/README b/vmwarectrl/README deleted file mode 100644 index cf1e40b..0000000 --- a/vmwarectrl/README +++ /dev/null @@ -1,6 +0,0 @@ -vmwarectrl ----------- - -This is a sample VMWARE_CTRL client. Someone interested in using -VMWARE_CTRL should use libvmwarectrl.[c|h] from this directory -and the main vmwarectrl.h and vmwarectrlproto.h diff --git a/vmwarectrl/autogen.sh b/vmwarectrl/autogen.sh deleted file mode 100755 index 904cd67..0000000 --- a/vmwarectrl/autogen.sh +++ /dev/null @@ -1,12 +0,0 @@ -#! /bin/sh - -srcdir=`dirname $0` -test -z "$srcdir" && srcdir=. - -ORIGDIR=`pwd` -cd $srcdir - -autoreconf -v --install || exit 1 -cd $ORIGDIR || exit $? - -$srcdir/configure --enable-maintainer-mode "$@" diff --git a/vmwarectrl/configure.ac b/vmwarectrl/configure.ac deleted file mode 100644 index b5e0dbb..0000000 --- a/vmwarectrl/configure.ac +++ /dev/null @@ -1,12 +0,0 @@ -AC_INIT(vmwarectrl, 0.2) -AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION) -AM_CONFIG_HEADER(config.h) - -AC_PROG_CC - -PKG_CHECK_MODULES(X11, x11 xext) -AC_SUBST(X11_CFLAGS) -AC_SUBST(X11_LIBS) - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT |