/* * Copyright 2006 by VMware, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of the copyright holder(s) * and author(s) shall not be used in advertising or otherwise to promote * the sale, use or other dealings in this Software without prior written * authorization from the copyright holder(s) and author(s). */ /* * vmwarectrl.c -- * * The implementation of the VMWARE_CTRL protocol extension that * allows X clients to communicate with the driver. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "dixstruct.h" #include "extnsionst.h" #include "randrstr.h" #include #include #include "vmware.h" #include "vmwarectrlproto.h" #ifndef HAVE_XORG_SERVER_1_5_0 #include #include #endif /* *---------------------------------------------------------------------------- * * VMwareCtrlQueryVersion -- * * Implementation of QueryVersion command handler. Initialises and * sends a reply. * * Results: * Standard response codes. * * Side effects: * Writes reply to client * *---------------------------------------------------------------------------- */ static int VMwareCtrlQueryVersion(ClientPtr client) { xVMwareCtrlQueryVersionReply rep = { 0, }; register int n; REQUEST_SIZE_MATCH(xVMwareCtrlQueryVersionReq); rep.type = X_Reply; rep.length = 0; rep.sequenceNumber = client->sequence; rep.majorVersion = VMWARE_CTRL_MAJOR_VERSION; rep.minorVersion = VMWARE_CTRL_MINOR_VERSION; if (client->swapped) { swaps(&rep.sequenceNumber, n); swapl(&rep.length, n); swapl(&rep.majorVersion, n); swapl(&rep.minorVersion, n); } WriteToClient(client, sizeof(xVMwareCtrlQueryVersionReply), (char *)&rep); return client->noClientException; } /* *---------------------------------------------------------------------------- * * VMwareCtrlDoSetRes -- * * Set the custom resolution into the mode list. * * This is done by alternately updating one of two dynamic modes. It is * done this way because the server gets upset if you try to switch * to a new resolution that has the same index as the current one. * * Results: * TRUE on success, FALSE otherwise. * * Side effects: * One dynamic mode will be updated if successful. * *---------------------------------------------------------------------------- */ static Bool VMwareCtrlDoSetRes(ScrnInfoPtr pScrn, CARD32 x, CARD32 y, Bool resetXinerama) { int modeIndex; DisplayModePtr mode; VMWAREPtr pVMWARE = VMWAREPTR(pScrn); if (pScrn && pScrn->modes) { VmwareLog(("DoSetRes: %d %d\n", x, y)); if (resetXinerama) { free(pVMWARE->xineramaNextState); pVMWARE->xineramaNextState = NULL; pVMWARE->xineramaNextNumOutputs = 0; } /* * Don't resize larger than possible but don't * return an X Error either. */ if (x > pVMWARE->maxWidth || y > pVMWARE->maxHeight) { return TRUE; } /* * Find an dynamic mode which isn't current, and replace it with * the requested mode. Normally this will cause us to alternate * between two dynamic mode slots, but there are some important * corner cases to consider. For example, adding the same mode * multiple times, adding a mode that we never switch to, or * adding a mode which is a duplicate of a built-in mode. The * best way to handle all of these cases is to directly test the * dynamic mode against the current mode pointer for this * screen. */ for (modeIndex = 0; modeIndex < NUM_DYN_MODES; modeIndex++) { /* * Initialise the dynamic mode if it hasn't been used before. */ if (!pVMWARE->dynModes[modeIndex]) { pVMWARE->dynModes[modeIndex] = VMWAREAddDisplayMode(pScrn, "DynMode", 1, 1); } mode = pVMWARE->dynModes[modeIndex]; if (mode != pScrn->currentMode) { break; } } mode->HDisplay = x; mode->VDisplay = y; return TRUE; } else { return FALSE; } } /* *---------------------------------------------------------------------------- * * VMwareCtrlSetRes -- * * Implementation of SetRes command handler. Initialises and sends a * reply. * * Results: * Standard response codes. * * Side effects: * Writes reply to client * *---------------------------------------------------------------------------- */ static int VMwareCtrlSetRes(ClientPtr client) { REQUEST(xVMwareCtrlSetResReq); xVMwareCtrlSetResReply rep = { 0, }; ScrnInfoPtr pScrn; ExtensionEntry *ext; register int n; REQUEST_SIZE_MATCH(xVMwareCtrlSetResReq); if (!(ext = CheckExtension(VMWARE_CTRL_PROTOCOL_NAME))) { return BadMatch; } pScrn = ext->extPrivate; if (pScrn->scrnIndex != stuff->screen) { return BadMatch; } if (!VMwareCtrlDoSetRes(pScrn, stuff->x, stuff->y, TRUE)) { return BadValue; } rep.type = X_Reply; rep.length = (sizeof(xVMwareCtrlSetResReply) - sizeof(xGenericReply)) >> 2; rep.sequenceNumber = client->sequence; rep.screen = stuff->screen; rep.x = stuff->x; rep.y = stuff->y; if (client->swapped) { swaps(&rep.sequenceNumber, n); swapl(&rep.length, n); swapl(&rep.screen, n); swapl(&rep.x, n); swapl(&rep.y, n); } WriteToClient(client, sizeof(xVMwareCtrlSetResReply), (char *)&rep); return client->noClientException; } /* *---------------------------------------------------------------------------- * * VMwareCtrlDoSetTopology -- * * Set the custom topology and set a dynamic mode to the bounding box * of the passed topology. If a topology is already pending, then do * nothing but do not return failure. * * Results: * TRUE on success, FALSE otherwise. * * Side effects: * One dynamic mode and the pending xinerama state will be updated if * successful. * *---------------------------------------------------------------------------- */ static Bool VMwareCtrlDoSetTopology(ScrnInfoPtr pScrn, xXineramaScreenInfo *extents, unsigned long number) { VMWAREPtr pVMWARE = VMWAREPTR(pScrn); if (pVMWARE && pVMWARE->xinerama) { VMWAREXineramaPtr xineramaState; short maxX = 0; short maxY = 0; size_t i; if (pVMWARE->xineramaNextState) { VmwareLog(("DoSetTopology: Aborting due to existing pending state\n")); return TRUE; } for (i = 0; i < number; i++) { maxX = MAX(maxX, extents[i].x_org + extents[i].width); maxY = MAX(maxY, extents[i].y_org + extents[i].height); } VmwareLog(("DoSetTopology: %d %d\n", maxX, maxY)); xineramaState = (VMWAREXineramaPtr)calloc(number, sizeof(VMWAREXineramaRec)); if (xineramaState) { memcpy(xineramaState, extents, number * sizeof (VMWAREXineramaRec)); /* * Make this the new pending Xinerama state. Normally we'll * wait until the next mode switch in order to synchronously * push this state out to X clients and the virtual hardware. * * However, if we're already in the right video mode, there * will be no mode change. In this case, push it out * immediately. */ free(pVMWARE->xineramaNextState); pVMWARE->xineramaNextState = xineramaState; pVMWARE->xineramaNextNumOutputs = number; if (maxX == pVMWARE->ModeReg.svga_reg_width && maxY == pVMWARE->ModeReg.svga_reg_height) { /* * The annoyance here is that when we reprogram the * SVGA device's monitor topology registers, it may * rearrange those monitors on the host's screen, but they * will still have the old contents. This might be * correct, but it isn't guaranteed to match what's on X's * framebuffer at the moment. So we'll send a * full-framebuffer update rect afterwards. */ vmwareNextXineramaState(pVMWARE); #ifdef HAVE_XORG_SERVER_1_2_0 RRSendConfigNotify(pScrn->pScreen); #endif vmwareSendSVGACmdUpdateFullScreen(pVMWARE); return TRUE; } else { return VMwareCtrlDoSetRes(pScrn, maxX, maxY, FALSE); } } else { return FALSE; } } else { return FALSE; } } /* *---------------------------------------------------------------------------- * * VMwareCtrlSetTopology -- * * Implementation of SetTopology command handler. Initialises and sends a * reply. * * Results: * Standard response codes. * * Side effects: * Writes reply to client * *---------------------------------------------------------------------------- */ static int VMwareCtrlSetTopology(ClientPtr client) { REQUEST(xVMwareCtrlSetTopologyReq); xVMwareCtrlSetTopologyReply rep = { 0, }; ScrnInfoPtr pScrn; ExtensionEntry *ext; register int n; xXineramaScreenInfo *extents; REQUEST_AT_LEAST_SIZE(xVMwareCtrlSetTopologyReq); if (!(ext = CheckExtension(VMWARE_CTRL_PROTOCOL_NAME))) { return BadMatch; } pScrn = ext->extPrivate; if (pScrn->scrnIndex != stuff->screen) { return BadMatch; } extents = (xXineramaScreenInfo *)(stuff + 1); if (!VMwareCtrlDoSetTopology(pScrn, extents, stuff->number)) { return BadValue; } rep.type = X_Reply; rep.length = (sizeof(xVMwareCtrlSetTopologyReply) - sizeof(xGenericReply)) >> 2; rep.sequenceNumber = client->sequence; rep.screen = stuff->screen; if (client->swapped) { swaps(&rep.sequenceNumber, n); swapl(&rep.length, n); swapl(&rep.screen, n); } WriteToClient(client, sizeof(xVMwareCtrlSetTopologyReply), (char *)&rep); return client->noClientException; } /* *---------------------------------------------------------------------------- * * VMwareCtrlDispatch -- * * Dispatcher for VMWARE_CTRL commands. Calls the correct handler for * each command type. * * Results: * Standard response codes. * * Side effects: * Side effects of individual command handlers. * *---------------------------------------------------------------------------- */ static int VMwareCtrlDispatch(ClientPtr client) { REQUEST(xReq); switch(stuff->data) { case X_VMwareCtrlQueryVersion: return VMwareCtrlQueryVersion(client); case X_VMwareCtrlSetRes: return VMwareCtrlSetRes(client); case X_VMwareCtrlSetTopology: return VMwareCtrlSetTopology(client); } return BadRequest; } /* *---------------------------------------------------------------------------- * * SVMwareCtrlQueryVersion -- * * Wrapper for QueryVersion handler that handles input from other-endian * clients. * * Results: * Standard response codes. * * Side effects: * Side effects of unswapped implementation. * *---------------------------------------------------------------------------- */ static int SVMwareCtrlQueryVersion(ClientPtr client) { register int n; REQUEST(xVMwareCtrlQueryVersionReq); REQUEST_SIZE_MATCH(xVMwareCtrlQueryVersionReq); swaps(&stuff->length, n); return VMwareCtrlQueryVersion(client); } /* *---------------------------------------------------------------------------- * * SVMwareCtrlSetRes -- * * Wrapper for SetRes handler that handles input from other-endian * clients. * * Results: * Standard response codes. * * Side effects: * Side effects of unswapped implementation. * *---------------------------------------------------------------------------- */ static int SVMwareCtrlSetRes(ClientPtr client) { register int n; REQUEST(xVMwareCtrlSetResReq); REQUEST_SIZE_MATCH(xVMwareCtrlSetResReq); swaps(&stuff->length, n); swapl(&stuff->screen, n); swapl(&stuff->x, n); swapl(&stuff->y, n); return VMwareCtrlSetRes(client); } /* *---------------------------------------------------------------------------- * * SVMwareCtrlSetTopology -- * * Wrapper for SetTopology handler that handles input from other-endian * clients. * * Results: * Standard response codes. * * Side effects: * Side effects of unswapped implementation. * *---------------------------------------------------------------------------- */ static int SVMwareCtrlSetTopology(ClientPtr client) { register int n; REQUEST(xVMwareCtrlSetTopologyReq); REQUEST_SIZE_MATCH(xVMwareCtrlSetTopologyReq); swaps(&stuff->length, n); swapl(&stuff->screen, n); swapl(&stuff->number, n); /* Each extent is a struct of shorts. */ SwapRestS(stuff); return VMwareCtrlSetTopology(client); } /* *---------------------------------------------------------------------------- * * SVMwareCtrlDispatch -- * * Wrapper for dispatcher that handles input from other-endian clients. * * Results: * Standard response codes. * * Side effects: * Side effects of individual command handlers. * *---------------------------------------------------------------------------- */ static int SVMwareCtrlDispatch(ClientPtr client) { REQUEST(xReq); switch(stuff->data) { case X_VMwareCtrlQueryVersion: return SVMwareCtrlQueryVersion(client); case X_VMwareCtrlSetRes: return SVMwareCtrlSetRes(client); case X_VMwareCtrlSetTopology: return SVMwareCtrlSetTopology(client); } return BadRequest; } /* *---------------------------------------------------------------------------- * * VMwareCtrlResetProc -- * * Cleanup handler called when the extension is removed. * * Results: * None * * Side effects: * None * *---------------------------------------------------------------------------- */ static void VMwareCtrlResetProc(ExtensionEntry* extEntry) { /* Currently, no cleanup is necessary. */ } /* *---------------------------------------------------------------------------- * * VMwareCtrl_ExitInit -- * * Initialiser for the VMWARE_CTRL protocol extension. * * Results: * None. * * Side effects: * Protocol extension will be registered if successful. * *---------------------------------------------------------------------------- */ void VMwareCtrl_ExtInit(ScrnInfoPtr pScrn) { ExtensionEntry *myext; if (!(myext = CheckExtension(VMWARE_CTRL_PROTOCOL_NAME))) { if (!(myext = AddExtension(VMWARE_CTRL_PROTOCOL_NAME, 0, 0, VMwareCtrlDispatch, SVMwareCtrlDispatch, VMwareCtrlResetProc, StandardMinorOpcode))) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to add VMWARE_CTRL extension\n"); return; } /* * For now, only support one screen as that's all the virtual * hardware supports. */ myext->extPrivate = pScrn; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Initialized VMWARE_CTRL extension version %d.%d\n", VMWARE_CTRL_MAJOR_VERSION, VMWARE_CTRL_MINOR_VERSION); } }