/* $Xorg: do_trns.c,v 1.3 2000/08/17 19:46:25 cpqbld Exp $ */ /* Copyright 1989-1991, Bitstream Inc., Cambridge, MA. You are hereby granted permission under all Bitstream propriety rights to use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo software and the Bitstream Charter outline font for any purpose and without restrictions; provided, that this notice is left intact on all copies of such software or font and that Bitstream's trademark is acknowledged as shown below on all unmodified copies of such font. BITSTREAM CHARTER is a registered trademark of Bitstream Inc. BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT. */ /* $XFree86: xc/lib/font/Speedo/do_trns.c,v 1.4 2001/08/27 19:49:50 dawes Exp $ */ /**************************** D O _ T R N S . C ****************************** * * * This module is responsible for executing all intelligent transformation * * for bounding box and outline data * * * ****************************************************************************/ #include "spdo_prv.h" /* General definitions for Speedo */ #define DEBUG 0 #if DEBUG #include #define SHOW(X) printf("X = %d\n", X) #else #define SHOW(X) #endif /***** GLOBAL VARIABLES *****/ /***** GLOBAL FUNCTIONS *****/ /***** EXTERNAL VARIABLES *****/ /***** EXTERNAL FUNCTIONS *****/ /***** STATIC VARIABLES *****/ /***** STATIC FUNCTIONS *****/ static void sp_split_curve(PROTO_DECL2 point_t P1,point_t P2,point_t P3,fix15 depth); static ufix8 FONTFAR *sp_get_args(PROTO_DECL2 ufix8 FONTFAR *pointer,ufix8 format,point_t STACKFAR *pP); FUNCTION ufix8 FONTFAR *read_bbox( GDECL ufix8 FONTFAR *pointer, /* Pointer to next byte in char data */ point_t STACKFAR *pPmin, /* Lower left corner of bounding box */ point_t STACKFAR *pPmax, /* Upper right corner of bounding box */ boolean set_flag) /* flag to indicate whether global oru bbox should be saved */ /* * Called by make_simp_char() and make_comp_char() to read the * bounding box data from the font. * Sets Pmin and Pmax to the bottom left and top right corners * of the bounding box after transformation into device space. * The units of Pmin and Pmax are sub-pixels. * Updates *ppointer to point to the byte following the * bounding box data. */ { ufix8 format1; ufix8 format = 0; fix15 i; point_t P; sp_globals.x_int = 0; sp_globals.y_int = sp_globals.Y_int_org; sp_globals.x_orus = sp_globals.y_orus = 0; format1 = NEXT_BYTE(pointer); pointer = sp_get_args(pointer, format1, pPmin); #if INCL_SQUEEZING || INCL_ISW if (set_flag) { sp_globals.bbox_xmin_orus = sp_globals.x_orus; sp_globals.bbox_ymin_orus = sp_globals.y_orus; } #endif *pPmax = *pPmin; for (i = 1; i < 4; i++) { switch(i) { case 1: if (format1 & BIT6) /* Xmax requires X int zone 1? */ sp_globals.x_int++; format = (format1 >> 4) | 0x0c; break; case 2: if (format1 & BIT7) /* Ymax requires Y int zone 1? */ sp_globals.y_int++; format = NEXT_BYTE(pointer); break; case 3: sp_globals.x_int = 0; format >>= 4; break; default: break; } pointer = sp_get_args(pointer, format, &P); #if INCL_SQUEEZING || INCL_ISW if (set_flag && (i==2)) { sp_globals.bbox_xmax_orus = sp_globals.x_orus; sp_globals.bbox_ymax_orus = sp_globals.y_orus; } #endif if ((i == 2) || (!sp_globals.normal)) { if (P.x < pPmin->x) pPmin->x = P.x; if (P.y < pPmin->y) pPmin->y = P.y; if (P.x > pPmax->x) pPmax->x = P.x; if (P.y > pPmax->y) pPmax->y = P.y; } } #if DEBUG printf("BBOX %6.1f(Xint 0), %6.1f(Yint 0), %6.1f(Xint %d), %6.1f(Yint %d)\n", (real)pPmin->x / (real)sp_globals.onepix, (real)pPmin->y / (real)sp_globals.onepix, (real)pPmax->x / (real)sp_globals.onepix, (format1 >> 6) & 0x01, (real)pPmax->y / (real)sp_globals.onepix, (format1 >> 7) & 0x01); #endif return pointer; } FUNCTION void proc_outl_data( GDECL ufix8 FONTFAR *pointer) /* Pointer to next byte in char data */ /* * Called by make_simp_char() and make_comp_char() to read the * outline data from the font. * The outline data is parsed, transformed into device coordinates * and passed to an output module for further processing. * Note that pointer is not updated to facilitate repeated * processing of the outline data when banding mode is in effect. */ { ufix8 format1, format2; point_t P0, P1, P2, P3; fix15 depth; fix15 curve_count; sp_globals.x_int = 0; sp_globals.y_int = sp_globals.Y_int_org; #if INCL_PLAID_OUT /* Plaid data monitoring included? */ record_xint((fix15)sp_globals.x_int); /* Record xint data */ record_yint((fix15)(sp_globals.y_int - sp_globals.Y_int_org)); /* Record yint data */ #endif sp_globals.x_orus = sp_globals.y_orus = 0; curve_count = 0; while(TRUE) { format1 = NEXT_BYTE(pointer); switch(format1 >> 4) { case 0: /* LINE */ pointer = sp_get_args(pointer, format1, &P1); #if DEBUG printf("LINE %6.1f, %6.1f\n", (real)P1.x / (real)sp_globals.onepix, (real)P1.y / (real)sp_globals.onepix); #endif fn_line(P1); sp_globals.P0 = P1; continue; case 1: /* Short XINT */ sp_globals.x_int = format1 & 0x0f; #if DEBUG printf("XINT %d\n", sp_globals.x_int); #endif #if INCL_PLAID_OUT /* Plaid data monitoring included? */ record_xint((fix15)sp_globals.x_int); /* Record xint data */ #endif continue; case 2: /* Short YINT */ sp_globals.y_int = sp_globals.Y_int_org + (format1 & 0x0f); #if DEBUG printf("YINT %d\n", sp_globals.y_int - sp_globals.Y_int_org); #endif #if INCL_PLAID_OUT /* Plaid data monitoring included? */ record_yint((fix15)(sp_globals.y_int - sp_globals.Y_int_org)); /* Record yint data */ #endif continue; case 3: /* Miscellaneous */ switch(format1 & 0x0f) { case 0: /* END */ if (curve_count) { fn_end_contour(); } return; case 1: /* Long XINT */ sp_globals.x_int = NEXT_BYTE(pointer); #if DEBUG printf("XINT %d\n", sp_globals.x_int); #endif #if INCL_PLAID_OUT /* Plaid data monitoring included? */ record_xint((fix15)sp_globals.x_int); /* Record xint data */ #endif continue; case 2: /* Long YINT */ sp_globals.y_int = sp_globals.Y_int_org + NEXT_BYTE(pointer); #if DEBUG printf("YINT %d\n", sp_globals.y_int - sp_globals.Y_int_org); #endif #if INCL_PLAID_OUT /* Plaid data monitoring included? */ record_yint((fix15)(sp_globals.y_int - sp_globals.Y_int_org)); /* Record yint data */ #endif continue; default: /* Not used */ continue; } case 4: /* MOVE Inside */ case 5: /* MOVE Outside */ if (curve_count++) { fn_end_contour(); } pointer = sp_get_args(pointer, format1, &P0); sp_globals.P0 = P0; #if DEBUG printf("MOVE %6.1f, %6.1f\n", (real)sp_globals.P0.x / (real)sp_globals.onepix, (real)sp_globals.P0.y / (real)sp_globals.onepix); #endif fn_begin_contour(sp_globals.P0, (boolean)(format1 & BIT4)); continue; case 6: /* Undefined */ #if DEBUG printf("*** Undefined instruction (Hex %4x)\n", format1); #endif continue; case 7: /* Undefined */ #if DEBUG printf("*** Undefined instruction (Hex %4x)\n", format1); #endif continue; default: /* CRVE */ format2 = NEXT_BYTE(pointer); pointer = sp_get_args(pointer, format1, &P1); pointer = sp_get_args(pointer, format2, &P2); pointer = sp_get_args(pointer, (ufix8)(format2 >> 4), &P3); depth = (format1 >> 4) & 0x07; #if DEBUG printf("CRVE %6.1f, %6.1f, %6.1f, %6.1f, %6.1f, %6.1f, %d\n", (real)P1.x / (real)sp_globals.onepix, (real)P1.y / (real)sp_globals.onepix, (real)P2.x / (real)sp_globals.onepix, (real)P2.y / (real)sp_globals.onepix, (real)P3.x / (real)sp_globals.onepix, (real)P3.y / (real)sp_globals.onepix, depth); #endif depth += sp_globals.depth_adj; if (sp_globals.curves_out) { fn_curve(P1, P2, P3, depth); sp_globals.P0 = P3; continue; } if (depth <= 0) { fn_line(P3); sp_globals.P0 = P3; continue; } sp_split_curve(P1, P2, P3, depth); continue; } } } FUNCTION static void sp_split_curve( GDECL point_t P1, /* First control point of Bezier curve */ point_t P2, /* Second control point of Bezier curve */ point_t P3, /* End point of Bezier curve */ fix15 depth) /* Levels of recursive subdivision required */ /* * Called by proc_outl_data() to subdivide Bezier curves into an * appropriate number of vectors, whenever curves are not enabled * for output to the currently selected output module. * sp_split_curve() calls itself recursively to the depth specified * at which point it calls line() to deliver each vector resulting * from the spliting process. */ { fix31 X0 = (fix31)sp_globals.P0.x; fix31 Y0 = (fix31)sp_globals.P0.y; fix31 X1 = (fix31)P1.x; fix31 Y1 = (fix31)P1.y; fix31 X2 = (fix31)P2.x; fix31 Y2 = (fix31)P2.y; fix31 X3 = (fix31)P3.x; fix31 Y3 = (fix31)P3.y; point_t Pmid; point_t Pctrl1; point_t Pctrl2; #if DEBUG printf("CRVE(%3.1f, %3.1f, %3.1f, %3.1f, %3.1f, %3.1f)\n", (real)P1.x / (real)sp_globals.onepix, (real)P1.y / (real)sp_globals.onepix, (real)P2.x / (real)sp_globals.onepix, (real)P2.y / (real)sp_globals.onepix, (real)P3.x / (real)sp_globals.onepix, (real)P3.y / (real)sp_globals.onepix); #endif Pmid.x = (X0 + (X1 + X2) * 3 + X3 + 4) >> 3; Pmid.y = (Y0 + (Y1 + Y2) * 3 + Y3 + 4) >> 3; if ((--depth) <= 0) { fn_line(Pmid); sp_globals.P0 = Pmid; fn_line(P3); sp_globals.P0 = P3; } else { Pctrl1.x = (X0 + X1 + 1) >> 1; Pctrl1.y = (Y0 + Y1 + 1) >> 1; Pctrl2.x = (X0 + (X1 << 1) + X2 + 2) >> 2; Pctrl2.y = (Y0 + (Y1 << 1) + Y2 + 2) >> 2; sp_split_curve(Pctrl1, Pctrl2, Pmid, depth); Pctrl1.x = (X1 + (X2 << 1) + X3 + 2) >> 2; Pctrl1.y = (Y1 + (Y2 << 1) + Y3 + 2) >> 2; Pctrl2.x = (X2 + X3 + 1) >> 1; Pctrl2.y = (Y2 + Y3 + 1) >> 1; sp_split_curve(Pctrl1, Pctrl2, P3, depth); } } FUNCTION static ufix8 FONTFAR *sp_get_args( GDECL ufix8 FONTFAR *pointer, /* Pointer to next byte in char data */ ufix8 format, /* Format specifiaction of argument pair */ point_t STACKFAR *pP) /* Resulting transformed point */ /* * Called by read_bbox() and proc_outl_data() to read an X Y argument * pair from the font. * The format is specified as follows: * Bits 0-1: Type of X argument. * Bits 2-3: Type of Y argument. * where the 4 possible argument types are: * Type 0: Controlled coordinate represented by one byte * index into the X or Y controlled coordinate table. * Type 1: Interpolated coordinate represented by a two-byte * signed integer. * Type 2: Interpolated coordinate represented by a one-byte * signed increment/decrement relative to the * proceding X or Y coordinate. * Type 3: Repeat of preceding X or Y argument value and type. * The units of P are sub-pixels. * Updates *ppointer to point to the byte following the * argument pair. */ { ufix8 edge; /* Read X argument */ switch(format & 0x03) { case 0: /* Index to controlled oru */ edge = NEXT_BYTE(pointer); sp_globals.x_orus = sp_plaid.orus[edge]; #if INCL_RULES sp_globals.x_pix = sp_plaid.pix[edge]; #endif break; case 1: /* 2 byte interpolated oru value */ sp_globals.x_orus = NEXT_WORD(pointer); goto L1; case 2: /* 1 byte signed oru increment */ sp_globals.x_orus += (fix15)((fix7)NEXT_BYTE(pointer)); L1: #if INCL_RULES sp_globals.x_pix = TRANS(sp_globals.x_orus, sp_plaid.mult[sp_globals.x_int], sp_plaid.offset[sp_globals.x_int], sp_globals.mpshift); #endif break; default: /* No change in X value */ break; } /* Read Y argument */ switch((format >> 2) & 0x03) { case 0: /* Index to controlled oru */ edge = sp_globals.Y_edge_org + NEXT_BYTE(pointer); sp_globals.y_orus = sp_plaid.orus[edge]; #if INCL_RULES sp_globals.y_pix = sp_plaid.pix[edge]; #endif break; case 1: /* 2 byte interpolated oru value */ sp_globals.y_orus = NEXT_WORD(pointer); goto L2; case 2: /* 1 byte signed oru increment */ sp_globals.y_orus += (fix15)((fix7)NEXT_BYTE(pointer)); L2: #if INCL_RULES sp_globals.y_pix = TRANS(sp_globals.y_orus, sp_plaid.mult[sp_globals.y_int], sp_plaid.offset[sp_globals.y_int], sp_globals.mpshift); #endif break; default: /* No change in X value */ break; } #if INCL_RULES switch(sp_globals.tcb.xmode) { case 0: /* X mode 0 */ pP->x = sp_globals.x_pix; break; case 1: /* X mode 1 */ pP->x = -sp_globals.x_pix; break; case 2: /* X mode 2 */ pP->x = sp_globals.y_pix; break; case 3: /* X mode 3 */ pP->x = -sp_globals.y_pix; break; default: /* X mode 4 */ #endif pP->x = (MULT16(sp_globals.x_orus, sp_globals.tcb.xxmult) + MULT16(sp_globals.y_orus, sp_globals.tcb.xymult) + sp_globals.tcb.xoffset) >> sp_globals.mpshift; #if INCL_RULES break; } switch(sp_globals.tcb.ymode) { case 0: /* Y mode 0 */ pP->y = sp_globals.y_pix; break; case 1: /* Y mode 1 */ pP->y = -sp_globals.y_pix; break; case 2: /* Y mode 2 */ pP->y = sp_globals.x_pix; break; case 3: /* Y mode 3 */ pP->y = -sp_globals.x_pix; break; default: /* Y mode 4 */ #endif pP->y = (MULT16(sp_globals.x_orus, sp_globals.tcb.yxmult) + MULT16(sp_globals.y_orus, sp_globals.tcb.yymult) + sp_globals.tcb.yoffset) >> sp_globals.mpshift; #if INCL_RULES break; } #endif return pointer; }