| Age | Commit message (Collapse) | Author |
|---|
|
send_request may only write to out.queue if no other thread is busy
writing to the network (as that thread may be writing from out.queue).
send_request may only allocate request sequence numbers if XCB owns
the socket.
Therefore, send_request must make sure that both conditions are true
when it holds iolock, which can only be done by looping until both
conditions are true without having dropped the lock waiting for the
second condition.
We choose to get the socket back from Xlib first as get_socket_back
has a complicated test and checking for other threads writing is a
simple in-lined check.
This also changes the sequence number checks (64k requests with no
reply, 4M request wrapping) to ensure that both conditions are true
before queueing the request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Uli Schlachter <psychon@znc.in>
|
|
Some xcb libraries depend on others; make these dependencies explicit
in the .pc files that are installed.
This change was generated automatically by running 'check-pc-requires -fix'
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
This walks through the .pc.in files and makes sure all of the Requires
lines express sufficient dependency information.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
This avoids having the nested header files also included at the top
level, which is more efficient.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Code can be simplified if the deallocation functions can always be called in
cleanup code. So if you have some code that does several things that can go
wrong, one of which is xcb_connect(), after this change, the xcb_connection_t*
variable can be initialized to NULL and xcb_disconnect() can always be called on
the connection object.
References: http://lists.freedesktop.org/archives/xcb/2013-September/008659.html
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Julien Cristau <jcristau@debian.org>
|
|
There are two kind of error connections in XCB. First, if something goes wrong
while the connection is being set up, _xcb_conn_ret_error() is used to return a
static connection in an error state. If something goes wrong later,
_xcb_conn_shutdown() is used to set c->has_error.
This is important, because the static object that _xcb_conn_ret_error() returns
must not be freed, while the dynamically allocated objects that go through
_xcb_conn_shutdown() must obviously be properly deallocated.
This used to work correctly, but in 769acff0da8, xcb_disconnect() was made to
ignore all connections in an error state completely. Fix this by only ignoring
the few static error connections that we have.
This was tested with the following hack:
xcb_connection_t *c = xcb_connect(NULL, NULL);
close(xcb_get_file_descriptor(c));
xcb_discard_reply(c, xcb_get_input_focus(c).sequence);
xcb_flush(c);
xcb_disconnect(c);
Valgrind confirms that xcb has a memory leak before this patch that this patch
indeed fixes.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Julien Cristau <jcristau@debian.org>
|
|
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
If xcb_connect() fails, it doesn't return NULL. Instead, it always
returns an xcb_connection_t*, and the user should check for errors with
the xcb_connection_has_error() function. What this function does is
check if conn->has_error contains a non-zero error code, and returns it.
If an error did occur, xcb doesn't actually return a full
xcb_connection_t though, it just returns (xcb_connection_t *)
error_code. Since the 'has_error' field is the first, it is still
possible to check conn->has_error.
That last trick was not immediately obvious to me, so add some guiding
comments. This also ensures no one obliviously rearranges the struct.
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
The section number is no longer hard-coded
The left footer is now "X Version 11".
The center footer is the package name with the version, "libxcb 1.9"
The three values above are provided through xorg-macros. They are passed-in
to the python c_client code.
Example of footer (last line, above dotted line)
[...]
AUTHOR
Generated from xproto.xml. Contact xcb@lists.freedesktop.org for cor‐
rections and improvements.
X Version 11 libxcb 1.9 xcb_send_event(3)
------------------------------------------------------------------------------
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
The automake MAN primary requires a hard coded extension to build
man pages. Let's avoid that as the extension number may vary by platform.
Take advantage of the fact that the man directory only contains man pages.
Wildcards are not supported by Automake but it happens to work
sufficiently well here.
Normally xorg build man pages by converting a source .man file to a
target file with the extension number. That would be too many files
in this case.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
The section number is no longer hard-coded, supplied by xorg-macros.
The left footer is now "X Version 11".
The center footer is the package name with the version, "libxcb 1.9"
The man directory is a sibbling to the doc directory. One can build
or clean the man pages without disturbing the library code.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
No content or form changes for the xcb manual or tutorial.
Only the configuration user visible bits change.
Xcb will now have the same configuration options as the 30 other
xorg modules.
Xorg classifies documentation as "user", "developer" or "specifications".
The xcb manual falls under the "developer" category. Developers docs
are never installed under $prefix.
A builder can selectively turn on/off any or all of the categories. He can
also selectively turn on/off any of the many tools used to generate
documentation such as doxygen, xmlto, etc... Each tool has an environment
variable defined such as DOXYGEN.
Other features are available, the user interface and the functionality
is the same on all modules.
--with-doxygen=FILE is replaced with DOXYGEN env variable
--disable-build-docs is replaced with --disable-devel-docs
The new interface displayed with ./configure --help:
--enable-devel-docs Enable building the developer documentation
(default: yes)
--with-doxygen Use doxygen to regenerate documentation (default:
auto)
DOXYGEN Path to doxygen command
DOT Path to the dot graphics utility
The dot tool checking has been added to util-macros in version 1.18.
Refer to the table of existing docs in xorg.
XCB will be added for the doxygen generated API manual.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
This is the updated minimum level as referenced in:
http://www.x.org/wiki/Building_the_X_Window_System/#index2h3
Libtool version 2 has been used for several years now. There should be
no surprises.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
No functional changes. Trying to make it clearer.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
The BASE_CFLAGS variable contains only warnings, just like the XCB
version of CWARNFLAGS. This will result in no changes in the binaries
produced. Xorg was missing -fd for SUNCC so it has been added to util-macros
v 1.18.
Do not get confused with the xorg deprecated CWARNFLAGS variable which
contains an option that is not a warning, -fno-strict-aliasing. This
option, should it be needed, can be added using the XORG_TESTSET_CFLAG
macro.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
XCB has been part of X.Org for a while now. This patch will harmonize the XCB
configuration, using xorg-macros series of macros. It is already used in the
XCB utils packages and is needed to build xcb-proto.
The XORG_DEFAULT_OPTIONS already includes the statement for the silent
rules.
The AC_PROG_CC statement is removed so as not to override AC_PROG_CC_C99
in XORG_DEFAULT_OPTIONS. The effective change is that xcb now uses c99 as
requested.
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
Reviewed-By: Ran Benita <ran234@gmail.com>
Signed-off-by: Peter Harris <pharris@opentext.com>
|
|
With the advent of the Present extension, some events (such as
PresentCompleteNotify) now use native 64-bit types on the wire.
For XGE events, we insert an extra "uint32_t full_sequence" field
immediately after the first 32 bytes of data. Normally, this causes
the subsequent fields to be shifted over by 4 bytes, and the structure
to grow in size by 4 bytes. Everything works fine.
However, if event contains 64-bit extended fields, this may result in
the compiler adding an extra 4 bytes of padding so that those fields
remain aligned on 64-bit boundaries. This causes the structure to grow
by 8 bytes, not 4. Unfortunately, XCB doesn't realize this, and
always believes that the length only increased by 4. read_packet()
then fails to malloc enough memory to hold the event, and the event
processing code uses the wrong offsets.
To fix this, mark any event structures containing 64-bit extended
fields with __attribute__((__packed__)).
v2: Use any(...) instead of True in (...), as suggested by
Daniel Martin.
v3 (Alan Coopersmith): Fix build with Solaris Studio 12.3 by moving the
attribute to after the structure definition.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com> [v1]
Reviewed-by: Josh Triplett <josh@joshtriplett.org> [v1]
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
libxcb 1.9.1 was released from a branch and thus its NEWS entries never made it
into the master branch. The other releases didn't update NEWS.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
Makes sure we generate the new generic event struct.
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
not test it for us
As RFC 2292 points out, some platforms (e.g. Darwin 9.8.0) provide
CMSG_FIRSTHDR(msg) which just returns msg.msg_control without first
checking if msg.msg_controllen is non-zero. We need a workaround for
such platforms not to let _xcb_in_read() segfault.
https://bugs.freedesktop.org/show_bug.cgi?id=72253
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
Sync: Due to commit e6a246e50e62cbcba3 "sync: Change value list param of
CreateAlarm and ChangeAlarm into switch", various symbols disappeared,
for example xcb_sync_{change,create}_alarm_sizeof.
xinput: This extension was updated from version 1.4 to 2.3. This means
that lots of new things are generated. However, this change is
backwards-compatible and thus age gets set to 1.
xkb: In commit 37d0f55392d6 "xkb: Work around alignment problems in
GetNames and GetMap replies", some padding fields were introduced into
structures for which an _unpack() function is generated. This changed
the size of the struct and caused offsets into this struct to change.
https://bugs.freedesktop.org/show_bug.cgi?id=71507
Signed-off-by: Uli Schlachter <psychon@znc.in>
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
This reverts commit f4d5b84800f960831e4fbb3ad9848bbb701020be.
The version of this struct that the code generator produces breaks the API,
because it gives the fields different (albeit better) names. Thus, we need to
restore the old version of this struct.
Additionally to the revert, this struct is documented as being deprecated. The
replacement was added to xcb-proto.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71502
Signed-off-by: Uli Schlachter <psychon@znc.in>
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
Currently, it is not possible to correctly iterate over the replies of
some requests. For example, the list of XIDeviceInfo returned by
the XIQueryDevice request from xinput2 is read as garbage starting from
the second entry.
The culprits are the _sizeof() used by the iterators. In the above case:
int
xcb_input_xi_device_info_sizeof (const void *_buffer /**< */)
{
char *xcb_tmp = (char *)_buffer;
[...]
unsigned int xcb_block_len = 0;
[...]
xcb_block_len += sizeof(xcb_input_xi_device_info_t);
xcb_tmp += xcb_block_len;
/* name */
xcb_block_len += (((_aux->name_len + 3) / 4) * 4) * sizeof(char);
xcb_tmp += xcb_block_len;
[...]
}
The problem here is that `xcb_block_len` is not zero'd right above the
`/* name */` comment, causing `xcb_tmp` to be incremented by
`sizeof(xcb_input_xi_device_info_t)` twice. The returned size is too
large.
https://bugs.freedesktop.org/show_bug.cgi?id=68387
Tested-by: Ran Benita <ran234@gmail.com>
Reviewed-by: Ran Benita <ran234@gmail.com>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
|
|
This reverts commit 9ae84ad187e2ba440c40f44b8eb21c82c2fdbf12.
After this patch was merged, there were complaints about it not being a good
idea. Revert this for now until we can agree on this.
References: http://lists.freedesktop.org/archives/xcb/2013-June/008340.html
Signed-off-by: Uli Schlachter <psychon@znc.in>
Conflicts:
src/xcbint.h
|
|
A char array on the stack is not guaranteed to have more than byte alignment.
This means that casting it to a 'struct cmsghdr' and accessing its members
may result in unaligned access. This will generate SIGBUS on struct
alignment architectures like OpenBSD/sparc64. The canonical solution is to
use a union to force proper alignment.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Matthieu Herrb <matthieu@herrb.eu>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
Required to expose the structure members in Solaris headers, since it
was an XPG4/UNIX95 addition to the Solaris ABI.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
--disable-sendfds or --enable-sendfds
By default, configure auto-detects based on whether your system
supports sendmsg at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Use these instead of computing the values directly so that it might
work on BSD or other non-Linux systems
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This allows apps to peel off certain XGE events into separate queues
for custom handling. Designed to support the Present extension
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
Requests signal which replies will have fds, and the replies report
how many fds they expect in byte 1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
This uses sendmsg to transmit file descriptors from the application to
the X server
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
Many system headers have warnings when compiled with this flag.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
When new XML files get installed, make sure the C files are regenerated
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-By: Uli Schlachter <psychon@znc.in>
|
|
xcb proto now publishes this structure from an XML description
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
It seems like POLLIN is specified as equivalent to POLLRDNORM | POLLRDBAND. Some
systems (e.g. QNX and HP-UX) take this literaly and have POLLIN defined as the
above bit combination. Other systems (e.g. Linux) have POLLIN as just a single
bit.
This means that if no out-of-band data is available (which should never be the
case), the result of poll() will not fulfil (fd.revents & POLLIN) == POLLIN on
QNX, because the POLLRDBAND bit is not set.
In other words, even though poll() signaled that the fd is readable, xcb would
not read from the file descriptor.
Fix this by checking if any bits from POLLIN are set in the result of poll(),
instead of all of them.
(This change was independently done by seanb@qnx.com as well)
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38001
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
In commit 8eba8690adac2, the API documentation for xcb_poll_for_event() was
fixed to remove an argument that was previously removed in commit 34168ab549.
However, that commit only removed the first line of the documentation, leaving
behind a spurious half-sentence. That commit happened seven years ago and now
finally someone noticed...
Thanks to Benjamin Herr for reporting this on IRC.
v2: Thanks again to Benjamin Herr for noticing that my commit message blamed the
wrong commit.
Signed-off-by: Uli Schlachter <psychon@znc.in>
|
|
Add check_all.log, check_all.trs and test-suite.log to tests/.gitignore.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
|
|
Don't ignore the files config.h and config.h.in, adjust the pattern to
ignore config.h*. This matches an additional config.h.in~ too.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Uli Schlachter <psychon@znc.in>
Tested-By: Ran Benita <ran234@gmail.com>
|
|
- Follow the suggestion by libtoolize:
"Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
rerunning libtoolize, to keep the correct libtool macros in-tree.
Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am."
and add the macro and define.
- Create the m4 directory and move acinclude.m4 as xcb.m4 there.
- Ignore the m4 files libtoolize copies into the m4 directory
(m4/l*.m4).
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Uli Schlachter <psychon@znc.in>
Tested-By: Ran Benita <ran234@gmail.com>
|
