path: root/Xtrans.mm

.\" $XFree86: xc/doc/specs/xtrans/Xtrans.mm,v 1.2 2003/07/09 15:27:27 tsi Exp $
'\".nr Ej 1
.PH "'''"
.ce
\fBX Transport Interface\fR
.sp
Copyright (c) 1993, 1994 NCR Corporation - Dayton, Ohio, USA
.sp
All Rights Reserved
.sp
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided
that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation, and that the name NCR not be used in advertising
or publicity pertaining to distribution of the software without specific,
written prior permission.  NCR makes no representations about the
suitability of this software for any purpose.  It is provided "as is"
without express or implied warranty.
.sp
NCR DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
NO EVENT SHALL NCR BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.sp
Copyright 1993, 1994, 2002 The Open Group
.sp  
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the ``Software''), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
.sp
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
.sp
THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
.sp
Except as contained in this notice, the name of The Open Group shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from The Open Group.
.sp
X Window System is a trademark of The Open Group, Inc.
.sp
Designed by Stuart Anderson (NCR) with help from Ralph Mor (X Consortium)
.sp
.ce
\fIDraft Version 0.6\fR
.sp
NOTE: This documentation does not completely match the implementation in R6
(as a result of some late changes made in the code).  Specifically, support
was added for font server cloning, and conditional compliation was introduced
for client vs. server code.
.bp
.H 1 "Purposes and Goals"
.P
The X Transport Interface is intended to combine all system and transport
specific code into a single place in the source tree. This API should be used
by all libraries, clients and servers of the X Window System. Use of this API
should allow the addition of new types of transports and support for new
platforms without making any changes to the source except in the X Transport
Interface code.
.P
This interface should solve the problem of multiple #ifdef TRANSPORT and
#ifdef PLATFORM statements scattered throughout the source tree.
.P
This interface should provide enough functionality to support all types of
protocols, including connection oriented protocols such as X11 and FS, and
connection-less oriented protocols such as XDMCP.
.H 1 "Overview of the interface"
.P
The interface provides an API for use by applications. The functions in this
API perform work that is common to all transports and systems, such as
parsing an address into a host and port number. The functions in this API
call transport specific functions that are contained in a table whose
contents are defined at compile time. This table contains an entry for each
type of transport. Each entry is a record containing mostly pointers to
function that implements the interface for the given transport.
.P
This API does not provide an abstraction for select() or poll().
These function are themselves transport independent, so an additional interface
is not needed for these functions.  It is also unclear how such an interface
would affect performance.
.H 1 "Definition of Address Specification Format"
.P
Addresses are specified in the following syntax,
.sp
\fIprotocol/host:port\fR
.sp
where \fIprotocol\fR specifies a protocol family or an alias for a protocol
family. A definition of common protocol families is given in a later section.
.P
The \fIhost\fR part specifies the name of a host or other transport dependent
entity that could be interpreted as a Network Service Access Point (NSAP).
.P
The \fIport\fR part specifies the name of a Transport Service Access Point
(TSAP). The format of the TSAP is defined by the underlying transport
implementation, but it is represented using a string format when it is part
of an address.
.H 1 "Internal Data Structures"
.P
There are two major data structures associated with the transport independent
portion of this interface.  Additional data structures may be used internally
by each transport.
.H 2 "Xtransport"
.P
Each transport supported has an entry in the transport table.
The transport table is an array of \fIXtransport\fR records. Each record
contains all the entry points for a single transport. This record is defined as:
.DS
.nf
typedef struct _Xtransport {

    char *TransName;
    int  flags;

    XtransConnInfo (*OpenCOTSClient)(
	struct _Xtransport *,	/* transport */
	char *,			/* protocol */
	char *,			/* host */
	char *			/* port */
    );

    XtransConnInfo (*OpenCOTSServer)(
	struct _Xtransport *,	/* transport */
	char *,			/* protocol */
	char *,			/* host */
	char *			/* port */
    );

    XtransConnInfo (*OpenCLTSClient)(
	struct _Xtransport *,	/* transport */
	char *,			/* protocol */
	char *,			/* host */
	char *			/* port */
    );

    XtransConnInfo (*OpenCLTSServer)(
	struct _Xtransport *,	/* transport */
	char *,			/* protocol */
	char *,			/* host */
	char *			/* port */
    );

    int	(*SetOption)(
	XtransConnInfo,		/* connection */
	int,			/* option */
	int			/* arg */
    );

    int	(*CreateListener)(
	XtransConnInfo,		/* connection */
	char *,			/* port */
	int			/* flags */
    );

    int	(*ResetListener)(
	XtransConnInfo		/* connection */
    );

    XtransConnInfo (*Accept)(
	XtransConnInfo		/* connection */
    );

    int	(*Connect)(
	XtransConnInfo,		/* connection */
	char *,			/* host */
	char *			/* port */
    );

    int	(*BytesReadable)(
	XtransConnInfo,		/* connection */
	BytesReadable_t *	/* pend */
    );

    int	(*Read)(
	XtransConnInfo,		/* connection */
	char *,			/* buf */
	int			/* size */
    );

    int	(*Write)(
	XtransConnInfo,		/* connection */
	char *,			/* buf */
	int			/* size */
    );

    int	(*Readv)(
	XtransConnInfo,		/* connection */
	struct iovec *,		/* buf */
	int			/* size */
    );

    int	(*Writev)(
	XtransConnInfo,		/* connection */
	struct iovec *,		/* buf */
	int			/* size */
    );

    int	(*Disconnect)(
	XtransConnInfo		/* connection */
    );

    int	(*Close)(
	XtransConnInfo		/* connection */
    );

} Xtransport;

.fi
.DE
.P
The \fIflags\fR field can contain an OR of the following masks:
.sp
\fITRANS_ALIAS\fR: indicates that this record is providing an alias,
and should not be used to create a listner.
.sp
\fITRANS_LOCAL\fR: indicates that this is a LOCALCONN transport.

.H 2 "XtransConnInfo"
.P
Each connection will have an opaque \fIXtransConnInfo\fR transport connection
object allocated for it. This record contains information specific to the
connection. The record is defined
as:
.DS
.nf
typedef struct _XtransConnInfo *XtransConnInfo;

struct _XtransConnInfo {
    struct _Xtransport     *transptr;
    char	*priv;
    int		flags;
    int		fd;
    int		family;
    char	*addr;
    int		addrlen;
    char	*peeraddr;
    int		peeraddrlen;
};
.fi
.DE
.H 1 "Exposed Transport Independent API"
.P
This API is included in each library and server that uses it. The API
may be used by the library, but it is not added to the public API for that
library.  This interface is simply an implementation
facilitator. This API contains a low level set of core primitives, and a few
utility functions that are built on top of the primitives. The utility
functions exist to provide a more familiar interface that can be used to
port existing code.
.P
A macro is defined in Xtrans.h for TRANS(func) that creates a unique function
name depending on where the code is compiled. For example, when built for Xlib,
TRANS(OpenCOTSClient) becomes _X11TransOpenCOTSClient.
.P
All failures are considered fatal, and the connection should be closed and
re-established if desired. In most cases, however, the value of errno will
be available for debugging purposes.
.H 2 "Core Interface API"
.BL
.LI
XtransConnInfo
TRANS(OpenCOTSClient)(char *address)
.P
This function creates a Connection-Oriented Transport that is suitable for
use by a client.
The parameter \fIaddress\fR contains the full address of the 
server to which this endpoint will be connected.
This functions returns an opaque transport connection object on success,
or NULL on failure.
.LI
XtransConnInfo
TRANS(OpenCOTSServer)(char *address)
.P
This function creates a Connection-Oriented Transport that is suitable for
use by a server.
The parameter \fIaddress\fR contains the full address to which this
server will be bound.
This functions returns an opaque transport connection object on success,
or NULL on failure.
.LI
XtransConnInfo
TRANS(OpenCLTSClient)(char *address)
.P
This function creates a Connection-Less Transport that is suitable for
use by a client.
The parameter \fIaddress\fR contains the full address of the 
server to which this endpoint will be connected.
This functions returns an opaque transport connection object on success,
or NULL on failure.
.LI
XtransConnInfo
TRANS(OpenCLTSServer)(char *address)
.P
This function creates a Connection-Less Transport that is suitable for
use by a server.
The parameter \fIaddress\fR contains the full address to which this
server will be bound.
This functions returns an opaque transport connection object on success,
or NULL on failure.
.LI
int TRANS(SetOption)(XtransConnInfo connection, int option, int arg)
.P
This function sets transport options, similar to the way setsockopt() and
ioctl() work.
The parameter \fIconnection\fR is an endpoint that was obtained from
_XTransOpen*() functions.
The parameter \fIoption\fR contains the option that will be set. The actual
values for \fIoption\fR are defined in a later section.
The parameter \fIarg\fR can be used to pass in an additional value that may
be required by some options.
This function return 0 on success and -1 on failure.
.P
Note: Based on current usage, the complimentary function TRANS(GetOption)()
is not necessary.
.LI
int TRANS(CreateListener)(XtransConnInfo connection, char *port, int flags)
.P
This function sets up the server endpoint for listening.
The parameter \fIconnection\fR is an endpoint that was obtained from
TRANS(OpenCOTSServer)() or TRANS(OpenCLTSServer)().
The parameter \fIport\fR specifies the port to which this endpoint
should be bound for listening.
If \fIport\fR is NULL, then the transport may attempt to allocate any
available TSAP for this connection. If the transport cannot support this,
then this function will return a failure.
The \fIflags\fR parameter can be set to ADDR_IN_USE_ALLOWED to allow
the call to the underlying binding function to fail with a EADDRINUSE
error without causing the TRANS(CreateListener) function itself to
fail.
This function return 0 on success and -1 on failure.
.LI
int TRANS(ResetListener)(XtransConnInfo connection)
.P
When a server is restarted, certain listen ports may need to be reset.
For example, unix domain needs to check that the file used for communication
has not been deleted.  If it has, it must be recreated.
The parameter \fIconnection\fR is an opened and bound endpoint that was
obtained from TRANS(OpenCOTSServer)() and passed to TRANS(CreateListener)().
This function will return one of the following values: TRANS_RESET_NOOP,
TRANS_RESET_NEW_FD, or TRANS_RESET_FAILURE.
.LI
XtransConnInfo
TRANS(Accept)(XtransConnInfo connection)
.P
Once a connection indication is received, this function can be called to 
accept the connection.
The parameter \fIconnection\fR is an opened and bound endpoint that was
obtained from TRANS(OpenCOTSServer)() and passed to TRANS(CreateListener)().
This function will return a new opaque transport connection object upon
success, NULL otherwise.
.LI
int TRANS(Connect)(XtransConnInfo connection, char *address)
.P
This function creates a connection to a server.
The parameter \fIconnection\fR is an endpoint that was obtained from
TRANS(OpenCOTSClient)().
The parameters \fIaddress\fR specify the TSAP to which this
endpoint should connect. If the protocol is included in the address, it will
be ignored.
This function return 0 on success and -1 on failure.
.LI
int TRANS(BytesReadable)(XtransConnInfo connection, BytesReadable_t *pend);
.P
This function provides the same functionality as the BytesReadable macro.
.LI
int TRANS(Read)(XtransConnInfo connection, char *buf, int size)
.P
This function will return the number of bytes requested on a COTS connection,
and will return the minimum of the number bytes requested or the size of
the incoming packet on a CLTS connection.
.LI
int TRANS(Write)(XtransConnInfo connection, char *buf, int size)
.P
This function will write the requested number of bytes on a COTS connection, and
will send a packet of the requested size on a CLTS connection.
.LI
int TRANS(Readv)(XtransConnInfo connection, struct iovec *buf, int size)
.P
Similar to TRANS(Read)().
.LI
int TRANS(Writev)(XtransConnInfo connection, struct iovec *buf, int size)
.P
Similar to TRANS(Write)().
.LI
int TRANS(Disconnect)(XtransConnInfo connection)
.P
This function is used when an orderly disconnect is desired. This function
breaks the connection on the transport. It is similar to the
socket function shutdown().
.LI
int TRANS(Close)(XtransConnInfo connection)
.P
This function closes the transport, unbinds it, and frees all resources that
was associated with the transport. If a TRANS(Disconnect) call was not made
on the connection, a disorderly disconnect may occur.
.LI
int TRANS(IsLocal)(XtransConnInfo connection)
.P
Returns TRUE if it is a local transport.
.LI
int TRANS(GetMyAddr)(XtransConnInfo connection,
.br
	int *familyp, int *addrlenp, Xtransaddr **addrp)
.P
This function is similar to getsockname(). This function will allocate space
for the address, so it must be freed by the caller.  Not all transports will
have a valid address until a connection is established. This function should
not be used until the connection is established with Connect() or Accept().
.LI
int TRANS(GetPeerAddr)(XtransConnInfo connection,
.br
	int *familyp, int *addrlenp, Xtransaddr **addrp)
.P
This function is similar to getpeername().  This function will allocate space
for the address, so it must be freed by the caller.  Not all transports will
have a valid address until a connection is established. This function should
not be used until the connection is established with Connect() or Accept().
.LI
int TRANS(GetConnectionNumber)(XtransConnInfo connection)
.P
Returns the file descriptor associated with this transport.
.LI
int TRANS(MakeAllCOTSServerListeners)(
.br
	char *port, int *partial_ret, int *count_ret, XtransConnInfo **connections_ret)
.P
This function should be used by most servers. It will try to establish a COTS
server endpoint for each transport listed in the transport table.
\fIpartial_ret\fR will be set to True if only a partial network could be
created.  \fIcount_ret\fR is the number of transports returns, and
\fIconnections_ret\fR is the list of transports.
.LI
int TRANS(MakeAllCLTSServerListeners)(
.br
	char *port, int *partial_ret, int *count_ret, XtransConnInfo **connections_ret)
.P
This function should be used by most servers. It will try to establish a CLTS
server endpoint for each transport listed in the transport table.
\fIpartial_ret\fR will be set to True if only a partial network could be
created.  \fIcount_ret\fR is the number of transports returns, and
\fIconnections_ret\fR is the list of transports.
.LE
.H 2 "Utility API"
.P
This section describes a few useful functions that have been implemented on top
of the Core Interface API. These functions are being provided as a convenience.
.BL
.LI
int TRANS(ConvertAddress)(int *familyp, int *addrlenp, Xtransaddr *addrp)
.P
This function converts a sockaddr based address to an
X authorization based address (ie AF_INET, AF_UNIX to the
X protocol definition (ie FamilyInternet, FamilyLocal)).

.LE
.H 1 "Transport Option Definition"
.P
The following options are defined for the TRANS(SetOption)() function. If an
OS or transport does not support any of these options, then it will silently
ignore the option.
.BL
.LI
TRANS_NONBLOCKING
.P
This option controls the blocking mode of the connection. If the argument
is set to 1, then the connection will be set to blocking. If the argument
is set to 0, then the connection will be set to non-blocking.
.LI
TRANS_CLOSEONEXEC
.P
This option determines what will happen to the connection when an exec
is encountered. If the argument is set to 1, then the connection will be
closed when an exec occurs. If the argument is set to 0, then the connection
will not be closed when an exec occurs.
.LE
.H 1 "Hidden Transport Dependent API"
.P
The hidden transport dependent functions are placed in the Xtransport record.
These function are similar to the Exposed Transport Independent API, but some
of the parameters and return values are slightly different.
Stuff like the #ifdef SUNSYSV should be handled inside these functions.
.BL
.LI
XtransConnInfo *OpenCOTSClient (
.br
	struct _Xtransport *thistrans, char *protocol, char *host, char *port)
.P
This function creates a Connection-Oriented Transport. The parameter
\fIthistrans\fR points to an Xtransport entry in the transport table. The
parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
containing the corresponding parts of the address that was passed into
TRANS(OpenCOTSClient)(). 
.P
This function must allocate and initialize the contents of the XtransConnInfo
structure that is returned by this function. This function will open the
transport, and bind it into the transport namespace if applicable. The
local address portion of the XtransConnInfo structure will also be filled
in by this function.
.LI
XtransConnInfo *OpenCOTSServer (
.br
	struct _Xtransport *thistrans, char *protocol, char *host, char *port)
.P
This function creates a Connection-Oriented Transport. The parameter
\fIthistrans\fR points to an Xtransport entry in the transport table. The
parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
containing the corresponding parts of the address that was passed into
TRANS(OpenCOTSClient)(). 
.P
This function must allocate and initialize the contents of the XtransConnInfo
structure that is returned by this function. This function will open the
transport. 
.LI
XtransConnInfo *OpenCLTSClient (
.br
	struct _Xtransport *thistrans, char *protocol, char *host, char *port)
.P
This function creates a Connection-Less Transport. The parameter
\fIthistrans\fR points to an Xtransport entry in the transport table. The
parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
containing the corresponding parts of the address that was passed into
TRANS(OpenCOTSClient)(). 
.P
This function must allocate and initialize the contents of the XtransConnInfo
structure that is returned by this function. This function will open the
transport, and bind it into the transport namespace if applicable. The
local address portion of the XtransConnInfo structure will also be filled
in by this function.
.LI
XtransConnInfo *OpenCLTSServer (
.br
	struct _Xtransport *thistrans, char *protocol, char *host, char *port)
.P
This function creates a Connection-Less Transport. The parameter
\fIthistrans\fR points to an Xtransport entry in the transport table. The
parameters \fIprotocol\fR, \fIhost\fR, and \fIport\fR point to strings
containing the corresponding parts of the address that was passed into
TRANS(OpenCOTSClient)(). 
.P
This function must allocate and initialize the contents of the XtransConnInfo
structure that is returned by this function. This function will open the
transport.
.LI
int SetOption (struct _Xtransport *thistrans, int option, int arg)
.P
This function provides a transport dependent way of implementing the options
defined by the X Transport Interface. In the current prototype, this function
is not being used, because all of the option defined so far, are transport
independent. This function will have to be used if a radically different
transport type is added, or a transport dependent option is defined.
.LI
int CreateListener (struct _Xtransport *thistrans, char *port, int flags )
.P
This function takes a transport endpoint opened for a server, and sets it
up to listen for incoming connection requests. The parameter \fIport\fR
should contain the port portion of the address that was passed to the Open
function.
.P
The parameter \fIflags\fR should be set to ADDR_IN_USE_ALLOWED if the 
underlying transport endpoint may be already bound and this should not
be considered as an error. Otherwise \fIflags\fR sould be set to 0. 
This is used by IPv6 code, where the same socket can be bound to both
an IPv6 address and then to a IPv4 address.
.P
This function will bind the transport into the transport name space if
applicable, and fill in the local address portion of the XtransConnInfo
structure. The transport endpoint will then be set to listen for
incoming connection requests.
.LI
int ResetListener (struct _Xtransport *thistrans)
.P
This function resets the transport for listening.
.LI
XtransConnInfo Accept(struct _Xtransport *thistrans)
.P
This function creates a new transport endpoint as a result of an incoming
connection request. The parameter \fIthistrans\fR is the endpoint that was opened
for listening by the server. The new endpoint is opened and bound into the
transport's namespace. A XtransConnInfo structure describing the new endpoint
is returned from this function
.LI
int Connect(struct _Xtransport *thistrans, char *host, char *port )
.P
This function establishes a connection to a server. The parameters \fIhost\fR
and \fIport\fR describe the server to which the connection should be
established. The connection will be established so that Read() and Write()
call can be made.
.LI
int BytesReadable(struct _Xtransport *thistrans, BytesReadable_t *pend )
.P
This function replaces the BytesReadable() macro. This allows each transport
to have it's own mechanism for determining how much data is ready to be read.
.LI
int Read(struct _Xtransport *thistrans, char *buf, int size )
.P
This function reads \fIsize\fR bytes into \fIbuf\fR from the connection.
.LI
int Write(struct _Xtransport *thistrans, char *buf, int size )
.P
This function writes \fIsize\fR bytes from \fIbuf\fR to the connection.
.LI
int Readv(struct _Xtransport *thistrans, struct iovec *buf, int size )
.P
This function performs a readv() on the connection.
.LI
int Writev(struct _Xtransport *thistrans, struct iovec *buf, int size )
.P
This function performs a writev() on the connection.
.LI
int Disconnect(struct _Xtransport *thistrans)
.P
This function initiates an orderly shutdown of a connection. If a transport
does not distinguish between orderly and disorderly disconnects, then a
call to this function will have no affect.
.LI
int Close(struct _Xtransport *thistrans)
.P
This function will break the connection, and close the endpoint.
.LE
.H 1 "Configuration"
.P
The implementation of each transport can be platform specific. It is expected
that existing connection types such as TCPCONN, UNIXCONN, LOCALCONN and
STREAMSCONN will be replaced with flags for each possible transport type.
.P
Below are the flags that can be set in \fIConnectionFlags\fR in the vendor.cf
or site.def config files.
.TS
center;
l l .
TCPCONN	Enables the INET (IPv4) Domain Socket based transport
IPv6	Extends TCPCONN to enable IPv6 Socket based transport
UNIXCONN	Enables the UNIX Domain Sokcet based transport
STREAMSCONN	Enables the TLI based transports
LOCALCONN	Enables the SYSV Local connection transports
DNETCONN	Enables the DECnet transports
.TE
.H 1 "Transport Specific Definitions"
.TS
center box;
lb | cb sb sb
lb | cb | cb | cb
lb | cb | cb | cb
l | l | l | l.
Protocol	Address Component
	_	_	_
Family	protocol	host	port
=
Internet	T{
inet
.br
inet6
.br
tcp
.br
udp
T}	name of an internet addressable host	T{
string containing the name of a service or a valid port number.
.br
Example: "xserver0", "7100"
T}
_
DECnet	decnet	name of a DECnet addressable host	T{
string containing the complete name of the object.
.br
Example: "X$X0"
T}
_
NETware	ipx	name of a NETware addressable host	T{
Not sure of the specifics yet.
T}
_
OSI	osi	name of an OSI addressable host	T{
Not sure of the specifics yet.
T}
_
Local	T{
local
.br
pts
.br
named
.br
sco
.br
isc
T}	(ignored)	T{
String containing the port name, ie "xserver0", "fontserver0".
T}
.TE
.H 1 "Implementation Notes"
.P
This section refers to the prototype implementation that is being developed
concurrently with this document. This prototype has been able to flush out
many details and problems as the specification was being developed.
.P
All of the source code for this interface is located in xc/lib/xtrans.
.P
All functions names in the source are of the format TRANS(func)(). The TRANS()
macro is defined as
.DS
.sp
#if (__STDC__ && !defined(UNIXCPP)) || defined(ANSICPP)
#define TRANS(func) _PROTOCOLTrans##func
#else
#define TRANS(func) _PROTOCOLTrans/**/func
#endif
.sp
.DE
PROTOCOL will be uniquely defined in each directory where this code
is compiled. PROTOCOL will be defined to be the name of the protocol that is
implemented by the library or server, such as X11, FS, and ICE.
.P
All libraries and servers that use the X Transport Interface should have a new
file called transport.c. This file will include the transports based
on the configuration flags \fIConnectionFlags\fR. Below is an example
transport.c.
.DS
.nf
#include "Xtransint.h"

#ifdef DNETCONN
#include "Xtransdnet.c"
#endif
#ifdef LOCALCONN
#include "Xtranslocal.c"
#endif
#ifdef TCPCONN
#include "Xtranssock.c"
#endif
#ifdef STREAMSCONN
#include "Xtranstli.c"
#endif
#include "Xtrans.c"
#include "Xtransutil.c"
.fi
.DE
.P
The source files for this interface are listed below.
.DS
.TS
center;
l l.
Xtrans.h	T{
Function prototypes and defines for
the Transport Independent API.
T}
Xtransint.h	T{
Used by the interface implementation only.
Contains the internal data structures.
T}
Xtranssock.c	T{
Socket implementation of the Transport Dependent API.
T}
Xtranstli.c	T{
TLI implementation of the Transport Dependent API.
T}
Xtransdnet.c	T{
DECnet implementation of the Transport Dependent API.
T}
Xtranslocal.c	T{
Implementation of the Transport Dependent API for
SYSV Local connections.
T}
Xtrans.c	T{
Exposed Transport Independent API Functions.
T}
Xtransutil.c	T{
Collection of Utility functions that use the
X Transport Interface.
T}
.TE
.DE
.P
The file \fIXtransint.h\fR contains much of the transport related code that
previously in Xlibint.h and Xlibnet.h. This will make the definitions
available for all transport users. This should also obsolete the equivalent
code in other libraries.