The X Input Extension Version 2.0 Peter Hutterer peter.hutterer@redhat.com Red Hat, Inc. 1. Introduction The X Input Extension version 2.0 (XI2) is the second major release of the X Input Extension. XI2 provides a number of enhancements over version 1.5, including: - use of XGE and GenericEvents. GenericEvents are of flexible length with a minimum length of 32 bytes. - explicit device hierarchy of master and slave devices. See Section 4. - use of multiple independent master devices (Multi-Poiner X or MPX). - the ability for devices to change capabilities at runtime. - raw device events XI2's intent is to replace both core input processing and prior versions of the X Input Extension. Historically, the majority of applications employed the core protocol requests and events to handle user input. The core protocol does not provide information about which device generated the event. The X Input Extension version up to 1.5 requires the differentiation between core and extended devices. Extended devices may not be core devices and thus cannot be used on applications employing the core protocol. XI2 addresses both of these issues by enabling devices to be both extended and core devices and providing device information in each event (with the exception of core events). ❧❧❧❧❧❧❧❧❧❧❧ 2. Notations used in this document Notation for requests: ┌─── Name of request name of request field: type of request field name of request field: type of request field ▶ name of reply field: type of reply field └─── Notation for events: ┌─── Name of event name of field: type of field name of field: type of field └─── Complex fields are specified in the following notation: name of field: COMPLEXFIELDTYPE or, if multiple of these fields exist: name of field: LISTofCOMPLEXFIELDTYPE COMPLEXFIELDTYPE: { name of subfield: type of subfield, name of subfield: type of subfield } ❧❧❧❧❧❧❧❧❧❧❧ 3. Interoperability between version 1.x and 2.0 FIXME ❧❧❧❧❧❧❧❧❧❧❧ 4. The Master/Slave device hierarchy XI2 introduces a device hierarchy split up into so-called Master Devices (MD) and Slave Devices (SD). 4.1 Master devices An MD is a virtual device created and managed by the server. MDs may send core events and XI events. However, an MD does not represent a physical device and relies on SDs for event generation. MDs come in two forms: as master pointers or as master keyboards. A master pointer is represented by a visible cursor on the screen. A master keyboard is represented by a keyboard focus. Each master pointer is paired with the respective master keyboard and vice versa, and this pairing is constant for the lifetime of both input devices. Clients can use this pairing behaviour to implement input paradigms that require pointer and keyboard interation (e.g. SHIFT + Click). 4.2 Slave devices An SD is usually a physical device configured in the server. SDs are not represented by a cursor or keyboard focus and may be attached to a master pointer or master keyboard. SDs can only be attached to any master of the same type (e.g. a physical pointer device can be attached to any master pointer). If an event is generated by an SD - if the SD is attached to a master pointer, it changes the position and/or button state of the master pointer. - if the SD is attached to a master keyboard, it sends events to this keyboard's focus window (if applicable) and/or changes the modifier state of this keyboard. - if the SD is not attached to an MD ("floating"), it does not change any master device. The SD has its own (invisible) sprite and its own focus. Both the sprite and the focus must be managed explicitly by the client program. 4.3 Event processing for attached slave devices Whenever an SD changes its logical state, - the event is delivered as an XI event to any interested clients. If the device is floating, event processing stops. Otherwise, if the device is attached, - the master device changes its classes to reflect the SD's capabilities. All interested clients are notified of this device change. - then, the event is delivered as an XI event from the MD to any interested clients. If the event has been delivered, event processing stops. Otherwise, - the event is delivered as a core event to any interested clients. Given that W is the event window, and P the parent window of W, event delivery to P is only attempted if neither the XI event, nor the core event has been delivered on W. Once an event has been delivered as either XI or core event, event processing stops. ❧❧❧❧❧❧❧❧❧❧❧ 5. Data types BUTTONMASK A binary mask defined as (1 << button number). A SETofBUTTONMASK is a binary OR of zero or more BUTTONMASK. DEVICE { DEVICEID, AllDevices, AllMasterDevices } A DEVICE specifies either a DEVICEID or AllDevices or AllMasterDevices. DEVICEID { CARD16 } A DEVICEID is a numerical ID for a device currently available in the server. The server may re-use a device ID after a device's removal. The device IDs 0 and 1 are reserved. AllDevices ........ 0 AllMasterDevices .. 1 DEVICEUSE { MasterPointer, MasterKeyboard, SlavePointer, SlaveKeyboard, FloatingSlave } A DEVICEUSE field specifies the current use of a device in the MD/SD device hierarchy. See Section 4 for more information. EVENTMASK An EVENTMASK is a binary mask defined as (1 << event type). A SETofEVENTMASK is a binary OR of zero or more EVENTMASK. FP1616 Fixed point decimal in 16.16 format as one INT16 and one CARD16. The INT16 contains the integral part, the CARD32 the decimal fraction shifted by 16. FP3232 Fixed point decimal in 32.32 format as one INT32 and one CARD32. The INT32 contains the integral part, the CARD32 the decimal fraction shifted by 32. VALUATORMASK A binary mask defined as (1 << valuator number). A SETofVALUATORMASK is a binary OR of zero or more VALUATORMASK. ❧❧❧❧❧❧❧❧❧❧❧ 6. Errors Errors are sent using core X error reports. Device A value for a DEVICE argument does not specify a valid DEVICE. ❧❧❧❧❧❧❧❧❧❧❧ 7. Requests: The server does not guarantee that the length of a reply remains constant in future revisions of XI2. A client must always retrieve the exact length of the protocol reply from the connection, even if the reply is longer than defined for the XI2 version supported by the client. Additional bytes in a request may include data supported in later versions of XI2. Clients should ignore this data. 7.1 Requests introduced in version 2.0 ┌─── XIQueryVersion major_version: CARD16 minor_version: CARD16 ▶ major_version: CARD16 minor_version: CARD16 └─── The client sends the highest supported version to the server and the server sends the highest version it supports, but no higher than the requested version. Major versions changes can introduce incompatibilities in existing functionality, minor version changes introduce only backward compatible changes. It is the clients responsibility to ensure that the server supports a version which is compatible with its expectations. major_version Major XI2 version. minor_version Minor XI2 version. If major_version is less than 2, a BadValue error occurs. ┌─── XIQueryDevice DEVICE deviceid ▶ num_devices: CARD16 deviceinfo: LISTofDEVICEINFO └─── DEVICEINFO { deviceid: DEVICEID use: DEVICEUSE attachment: DEVICEID enabled: BOOL num_classes: CARD16 name_len: CARD16 name: LISTofCHAR8 classes: LISTofCLASS } CLASS { BUTTONCLASS KEYCLASS, AXISCLASS } BUTTONCLASS { type: ButtonClass length: CARD16 sourceid: CARD16 buttons_len: CARD16 state: SETofBUTTONMASK labels: LISTofATOM } KEYCLASS { type: KeyClass length: CARD16 sourceid: CARD16 num_keys: CARD16 keys: LISTofCARD32 } AXISCLASS { type: AxisClass length: CARD16 sourceid: CARD16 axisnumber: CARD16 label: ATOM min: FP3232 max: FP3232 value: FP3232 resolution: CARD32 } XIQueryDevices details information about the requested input devices. devices The device to list. If 'devices' is AllDevices, all enabled and disabled devices are listed. If 'devices' is AllMasterDevices, all enabled and disabled master devices are listed. If 'devices' is a valid DEVICE, only this DEVICE is listed and 'num_devices' is 1. num_devices The number of 'deviceinfos' returned. Each 'deviceinfo' is detailed as follows: deviceid The unique ID of the device. Device IDs may get re-used when a device is removed. use If the device is a master pointer, 'use' is MasterPointer. If the device is a master keyboard, 'use' is MasterKeyboard. If the device is a slave pointer, 'use' is SlavePointer. If the device is a slave keyboard, 'use' is SlaveKeyboard. If the device is a floating slave, 'use' is FloatingSlave. attachment If the device is a master pointer or a master keyboard, 'attachment' specifies the paired master keyboard, or the paired master pointer, respectively. If the device is a non-floating slave device 'attachment' specifies the master device this device is attached to. If the device is a floating slave, 'attachment' is undefined. enabled Zero if the device is disabled, non-zero otherwise. num_classes Number of 'classes' provided. name_len Length of the name in bytes. classes Details the available classes provided by the device in an undefined order. name The device's name, padded to a multiple of 4 bytes. For all classes, 'type' specifies the device class. Clients are required to ignore unknown device classes. The 'length' field specifies the length of the class in 4 byte units. The following classes may occur only once: ButtonClass, KeyClass ButtonClass: type Always ButtonClass. length Length in 4 byte units. sourceid The device this class originates from. num_buttons Number of buttons provided by the device. labels List of Atoms specifying the label for each button. An atom of None specifies an unlabeled button. Buttons are listed in the device-native order and potential button mappings are ignored. state The current button mask for this device. Each bit representing a button is 1 if this button is logically down, or 0 otherwise. State a multiple of 4-byte units and always contains at least num_buttons bits. KeyClass: type Always KeyClass. length Length in 4 byte units. sourceid The device this class originates from. num_keys Number of keycodes provided by the device. keys List of keycodes provided. AxisClass: type Always AxisClass. length Length in 4 byte units. sourceid The device this class originates from. axisnumber Axis number of this axis. The axis number is in device-native order and potential axis mappings are ignored. label Atom specifying the axis name. An Atom of None specifies an unlabeled axis. min Minimum value. max Minimum value. resolution Resolution in counts/meter. mode Relative or Absolute. value Last published axis value (if mode is absolute). An axis in Relative mode may specify 'min' and 'max' as a hint to the client. If no 'min' and 'max' information is available, both must be 0. ┌─── XISelectEvents window: Window num_masks: CARD16 masks: LISTofEVENTMASK └─── EVENTMASK { deviceid: DEVICE, mask_len: CARD16, mask: SETofEVENTMASK window The window to select the events on. num_masks Number of items in mask. deviceid Numerical deviceid, or AllDevices, or AllMasterDevices. mask_len Length of mask in 4 byte units. mask Event mask. An event mask for an event type T is defined as (1 << T). XISelectEvents selects for XI2 events on 'window'. If 'num_masks' is 0, a BadValue error occurs. Each 'mask' sets the (and overwrites a previous) event mask for the DEVICE specified through 'deviceid'. The device 'AllDevices' or 'AllMasterDevices' is treated as a separate device by server. A client's event mask is the union of 'AllDevices', 'AllMasterDevices' and the per-device event mask. The removal of device from the server unsets the event masks for the device. If an event mask is set for AllDevices or AllMasterDevices, the event mask is not cleared on device removal and affects all future devices. If 'mask_len' is 0, the event mask for the given device is cleared. The mask for XIHierarchyEvents may only be selected for XIAllDevices. Setting it for any other device results in a BadValue error. ┌─── XIGetSelectedEvents window: Window ▶ num_masks: CARD16 masks: LISTofEVENTMASK └─── window The window to select the events on. num_masks Number of items in mask. masks Selected event masks by this client. Masks are returned on a per-device basis, with masks for 'AllDevices' and 'AllMasterDevices' returned separately. If 'num_masks' is 0, no events have been selected by this client on the given window. ┌─── XIQueryPointer window: Window deviceid: DEVICEID ▶ root: Window child: Window root_x: FP1616 root_y: FP1616 win_x: FP1616 win_y: FP1616 same_screen: BOOL mods: MODIFIERINFO group: GROUPINFO buttons_len: CARD16 buttons: SETofBUTTONMASK └─── Query a master pointer device for its current position. root The root window the pointer is logically on. child The child window of 'window' that contains the pointer or None. root_x root_y Pointer position relative to the root window's origin. win_x win_y Pointer position relative to 'window' or 0 if 'same_screen' is false. same_screen TRUE if 'window' is on the same screen as the pointer. mods XKB modifier state on the paired device. group XKB group state on the paired device. buttons_len The length of 'buttons' in 4 byte units. buttons Button state. ┌─── XIWarpPointer src_win: Window dst_win: Window src_x: FP1616 src_y: FP1616 src_width: INT16 src_height: INT16 dst_x: FP1616 dst_y: FP1616 deviceid: DEVICEID └─── WarpPointer moves the pointer of 'deviceid' as if the user had moved the pointer. WarpPointer can only be called for MasterPointer and FloatingSlave devices. src_win If src_window is not None, the move only takes place if src_window contains the pointer and the pointer is contained in the specified rectangle of src_window. dst_win If dst_win is None, this request moves the pointer by offsets 'dst_x'/'dst_y' relative to the current position of the pointer. If dst_window is a window, this request moves the pointer to 'dst_x'/'dst_y' relative to dst_win's origin. src_x src_y src_width src_height Specifies the source window rectangle. dst_x dst_y The relative coordinates to move the pointer if 'dst_win' is None, or the absolute coordinates if 'dst_win' is a window. deviceid The device to warp. This request cannot be used to move the pointer outside the confine-to window of an active pointer grab. An attempt will only move the pointer as far as the closest edge of the confine-to window. This request will generate events just as if the user had instantaneously moved the pointer. ┌─── XIChangeCursor win: Window cursor: Cursor deviceid: DEVICEID └─── Change a master pointer's cursor on the specified window. window The window. cursor The new cursor or None. deviceid The master pointer device. Whenever 'device' enters a window W, the cursor shape is selected in the following order: - if the current window has a device cursor C(d) defined for 'device', display this cursor C(d). - otherwise, if the current window has a cursor C(w) defined in the core protocol's window attributes, display cursor C(w). - repeat on parent window until a cursor has been found. ┌─── XIChangeHierarchy num_changes: CARD8 changes: LISTofHIERARCHYCHANGES └─── HIERARCHYCHANGE { ADDMASTER, REMOVEMASTER, ATTACHSLAVE, DETACHSLAVE } HIERARCHYCHANGETYPE { AddMaster, RemoveMaster, AttachSlave, DetachSlave } CHANGEMODE { Float, Attach } ADDMASTER { type: HIERARCHYCHANGETYPE length: CARD16 name_len: CARD16 send_core: BOOL enable: BOOL name: LISTofCHAR8 } REMOVEMASTER { type: HIERARCHYCHANGETYPE length: CARD16 deviceid: DEVICEID return_mode: CHANGEMODE return_pointer: DEVICEID return_keyboard: DEVICEID } ATTACHSLAVE { type: HIERARCHYCHANGETYPE length: CARD16 deviceid: DEVICEID master: DEVICEID } DETACHSLAVE { type: HIERARCHYCHANGETYPE length: CARD16 deviceid: DEVICEID } XIChangeHierarchy allows a client to modify the MD/SD device hierarchy (see Section 4). num_changes The number of changes to apply to the current hierarchy. changes The list of changes. The server processes the changes one by one and applies changes immediately. If an error occurs, processing stops at the current change and returns the number of successfully applied changes in the error. ADDMASTER creates a pair of master devices. type Always AddMaster. length Length in 4 byte units. name_len Length of 'name' in bytes. send_core TRUE if the device should send core events. enable TRUE if the device is to be enabled immediately. name The name for the new master devices. The master pointer's name is automatically appended with " pointer", the master keyboard's name is automatically appended with " keyboard". REMOVEMASTER removes an existing master device. type Always RemoveMaster. length Length in 4 byte units. deviceid The device to remove. return_mode Return mode for attached slave devices. If 'return_mode' is Float, all slave devices are set to floating. If 'return_mode' is Attach, slave pointers are attached to 'return_pointer' and slave keyboards are attached to 'return_keyboard'. return_pointer return_keyboard The master pointer and master keyboard to attach slave devices to, if 'return_mode' is Attach. Removing a master pointer removes the paired master keyboard and vice versa. ATTACHSLAVE attaches a slave device to a given master device. type Always ChangeAttachment. length Length in 4 byte units. deviceid Deviceid of the slave device. master The new master device to attach this slave device to. DETACHSLAVE detaches a slave device from its current master device. type Always ChangeAttachment. length Length in 4 byte units. deviceid Deviceid of the slave device. ┌─── XISetClientPointer win: Window deviceid: DEVICEID └─── Set the ClientPointer for the client owning 'win' to the given device. win Window or client ID. deviceid The master pointer or master keyboard that acts as ClientPointer. Some protocol requests are ambiguous and the server has to choose a device to provide data for a request or a reply. By default, the server will choose a client's ClientPointer device to provide the data, unless the client currently has a grab on another device. If win is None, the ClientPointer for this client is set to the given device. Otherwise, if win is a valid window, the ClientPointer for the client owning this window is set to the given device. Otherwise, if win is not a valid window but a client with the client mask equal to win exists, this client's ClientPointer is set to the given device. If deviceid does not specify a master pointer or master keyboard, a BadDevice error returned. If window does not specify a valid window or client ID and is not None, a BadWindow error is returned. ┌─── XIGetClientPointer win: Window ▶ set: BOOL deviceid: DEVICEID └─── Query the ClientPointer for the client owning 'win'. win The window or client ID. set TRUE if the client has an explicitly set ClientPointer. deviceid The master pointer that acts as a ClientPointer if 'set' is TRUE. ┌─── XISetFocus focus: Window deviceid: DEVICEID time: Time └─── Set the focus for the given device to the given window. Future key events from this device are sent to this window. This request generates FocusIn and FocusOut events. focus A viewable window or None. deviceid The device to modify the focus window for. time Specifies the time to change the focus or CurrentTime. If focus is None, key events from this device are discarded until a new focus window is set. If focus is a viewable window, key events from this device are sent to this window. If the window becomes unviewable, the window's first viewable ancestor automatically becomes the focus window and FocusIn and FocusOut events are sent as if a client had changed the focus window. This is equivalent to RevertToParent in the core XSetInputFocus window. This request has no effect if the specified time is earlier than the current last-focus-change time or is later than the current X server time. Otherwise, the last-focus-change time is set to the specified time. ┌─── XIGetFocus deviceid: DEVICEID ▶ focus: Window └─── Return the current focus window for the given device. ┌─── XIGrabDevice deviceid: DEVICEID grab_window: Window owner_events: BOOL grab_mode: { Synchronous, Asynchronous } paired_device_mode: { Synchronous, Asynchronous } time: TIMESTAMP or CurrentTime cursor: Cursor mask_len: CARD16 masks: SETofEVENTMASK ▶ status: Success, AlreadyGrabbed, Frozen, InvalidTime, NotViewable └─── This request actively grabs control of the specified input device. Further input events from this device are reported only to the grabbing client. This request overides any previous active grab by this client for this device. deviceid The device to grab. grab_window Events are reported relative to the grab window. owner_events Specifies whether event will be reported normally or relative to the grab window. grab_mode Specifies if this device will be frozen as a result of the grab. paired_device_mode Specifies if the master device paired with this device will be frozen as a result of the grab. time A valid server time or CurrentTime. cursor The cursor to display for the duration of the grab or None. mask_len Length of mask in 4 byte units. mask Event mask. An event mask for an event type T is defined as (1 << T). status Success or the reason why the grab could not be established. The masks parameter specifies which events the client wishes to receive while the device is grabbed. If owner-events is False, input events generated from this device are reported with respect to grab-window, and are only reported if selected by being included in the event-list. If owner-events is True, then if a generated event would normally be reported to this client, it is reported normally, otherwise the event is reported with respect to the grab-window, and is only reported if selected by being included in the event-list. For either value of owner-events, unreported events are discarded. If grab-mode is Asynchronous, device event processing continues normally. If the device is currently frozen by this client, then processing of device events is resumed. If grab-mode is Synchronous, the state of the grabbed device (as seen by means of the protocol) appears to freeze, and no further device events are generated by the server until the grabbing client issues a releasing XIAllowEvents request or until the device grab is released. Actual device input events are not lost while the device is frozen; they are simply queued for later processing. If the device is a slave device, the paired-device-mode is ignored. Otherwise, if this device is a master device and paired-device-mode is Asynchronous, event processing is unaffected by activation of the grab. If this device is a master device and paired-device-mode is Synchronous, the state of the master device paired with this device (as seen by means of the protocol) appears to freeze, and no further events are generated by the server until the grabbing client issues a releasing XIAllowEvents request or until the device grab is released. Actual events are not lost while the devices are frozen; they are simply queued for later processing. If the cursor is not None and the device is a master pointer device, the cursor will be displayed until the device is ungrabbed. This request fails and returns: AlreadyGrabbed: If the device is actively grabbed by some other client. NotViewable: If grab-window is not viewable. InvalidTime: If the specified time is earlier than the last-grab-time for the specified device or later than the current X server time. Otherwise, the last-grab-time for the specified device is set to the specified time and CurrentTime is replaced by the current X server time. Frozen: If the device is frozen by an active grab of another client. To release a grab of a device, use XIUngrabDevice. ┌─── XIUngrabDevice deviceid: DEVICEID time: TIMESTAMP or CurrentTime └─── This request releases the device if this client has it actively grabbed (from either XIGrabDevice, XIGrabDeviceKey or XIGrabDeviceButton) and releases any queued events. If any devices were frozen by the grab, XIUngrabDevice thaws them. deviceid The device to grab. time A valid server time or CurrentTime. The request has no effect if the specified time is earlier than the last-device-grab time or is later than the current server time. This request generates FocusIn and FocusOut events. An XIUngrabDevice is performed automatically if the event window for an active device grab becomes not viewable. ┌─── XIAllowEvents: deviceid: DEVICEID time: TIMESTAMP or CurrentTime event_mode: { AsyncDevice, SyncDevice, AsyncPairedDevice, SyncPairedDevice, ReplayDevice, AsyncPair, SyncPair } └─── The XIAllowEvents request releases some queued events if the client has caused a device to freeze. deviceid The device to grab. time A valid server time or CurrentTime. event_mode Specifies whether a device is to be thawed and events are to be replayed. The request has no effect if the specified time is earlier than the last-grab time of the most recent active grab for the client, or if the specified time is later than the current X server time. The following describes the processing that occurs depending on what constant you pass to the event-mode argument: AsyncDevice: If the specified device is frozen by the client, event processing for that device continues as usual. If the device is frozen multiple times by the client on behalf of multiple separate grabs, AsyncDevice thaws for all. AsyncDevice has no effect if the specified device is not frozen by the client, but the device need not be grabbed by the client. SyncDevice: If the specified device is frozen and actively grabbed by the client, event processing for that device continues normally until the next event is reported to the client. At this time, the specified device again appears to freeze. However, if the reported event causes the grab to be released, the specified device does not freeze. SyncDevice has no effect if the specified device is not frozen by the client or is not grabbed by the client. ReplayDevice: If the specified device is actively grabbed by the client and is frozen as the result of an event having been sent to the client (either from the activation of a XIGrabButton or from a previous XIAllowEvents with mode SyncDevice, but not from a Grab), the grab is released and that event is completely reprocessed. This time, however, the request ignores any passive grabs at or above (towards the root) the grab-window of the grab just released. The request has no effect if the specified device is not grabbed by the client or if it is not frozen as the result of an event. AsyncPairedDevice If the paired master device is frozen by the client, event processing for it continues as usual. If the paired device is frozen multiple times by the client on behalf of multiple separate grabs, AsyncPairedDevice thaws for all. AsyncPairedDevice has no effect if the device is not frozen by the client, but those devices need not be grabbed by the client. AsyncPairedDevice has no effect if deviceid specifies a slave device. SyncPairedDevice If the paired master device is frozen by the client, event processing (for the paired master device) continues normally until the next button or key event is reported to the client for the grabbed device (button event for the grabbed device, key or motion event for the device), at which time the device again appears to freeze. However, if the reported event causes the grab to be released, then the device does not freeze. SyncPairedDevice has no effect if the specified device is not grabbed by the client or if it is no frozen as the result of an event. SyncPairedDevice has no effect if deviceid specifies a slave device. SyncPair If both the device and the paired master device are frozen by the client, event processing (for both devices) continues normally until the next XIButtonPress, XIButtonRelease, XIKeyPress, or XIKeyRelease event is reported to the client for a grabbed device (button event for a pointer, key event for a keyboard), at which time the devices again appear to freeze. However, if the reported event causes the grab to be released, then the devices do not freeze (but if the other device is still grabbed, then a subsequent event for it will still cause both devices to freeze). SyncPair has no effect unless both the device and the paired master device are frozen by the client. If the device or paired master device is frozen twice by the client on behalf of two separate grabs, SyncPair thaws for both (but a subsequent freeze for SyncPair will only freeze each device once). SyncPair has no effect if deviceid specifies a slave device. AsyncPair If the device and the paired master device are frozen by the client, event processing for both devices continues normally. If a device is frozen twice by the client on behalf of two separate grabs, AsyncBoth thaws for both. AsyncPair has no effect unless both the device and the paired master device frozen by the client. AsyncPair has no effect if deviceid specifies a slave device. ┌─── XIPassiveGrabDevice deviceid: DEVICEID detail: CARD32 grab_type: GRABTYPE grab_window: Window cursor: Cursor owner_events: Bool grab_mode: { Synchronous, Asynchronous } paired_device_mode: { Synchronous, Asynchronous } num_modifiers: INT16 mask_len: CARD16 masks: SETofEVENTMASK modifiers: CARD32 or GrabAnyModifier ▶ num_modifiers_return: INT16 modifiers_return: GRABMODIFIERINFO └─── GRABTYPE { GrabtypeButton, GrabtypeKeysym, GrabtypeEnter, GrabTypeFocusIn} GRABMODIFIERINFO { status: Access modifiers: CARD32 } Establish an explicit passive grab for a button or keysym on the specified input device. cursor The cursor to display for the duration of the grab. If grab_type is not GrabtypeButton, this argument is ignored. deviceid The device to establish the passive grab on. detail The button number, or key symbol to grab for. Must be 0 for GrabtypeEnter and GrabtypeFocusIn. grab_type The type of grab to establish. grab_window Events are reported relative to the grab window. grab_mode If grab-mode is Asynchronous, device event processing continues normally. If the device is currently frozen by this client, then processing of device events is resumed. If grab-mode is Synchronous, the state of the grabbed device (as seen by means of the protocol) appears to freeze, and no further device events are generated by the server until the grabbing client issues a releasing XIAllowEvents request or until the device grab is released. Actual device input events are not lost while the device is frozen; they are simply queued for later processing. mask_len Length of mask in 4 byte units. mask Event mask. An event mask for an event type T is defined as (1 << T). modifiers XKB modifier state to activate this passive grab. num_modifiers Number of elements in modifiers. owner_events Specifies whether event will be reported normally or relative to the grab window. num_modifiers_return Number of elements in modifiers_return modifiers_return XKB modifier state that could not be grabbed. If owner-events is False, input events generated from this device are reported with respect to grab-window, and are only reported if selected by being included in the event-list. If owner-events is True, then if a generated event would normally be reported to this client, it is reported normally, otherwise the event is reported with respect to the grab-window, and is only reported if selected by being included in the event-list. For either value of owner-events, unreported events are discarded. If deviceid specifies a master pointer, the modifiers of the paired master keyboard are used. If deviceid specifies a slave pointer the modifiers of the master keyboard paired with the attached master pointers are used. If deviceid specifies a slave keyboard, the modifiers of the attached master keyboard are used. Note that activating a grab on a slave device detaches the device from its master. In this case, the modifiers after activation of the grab are from the slave device only and may be different to the modifier state when the grab was triggered. In the future, if grab_type is GrabtypeButton or GrabtypeKeyboard, the device is actively grabbed if: - the device is not grabbed, and - the specified modifier keys are down, and - the grab_type is GrabtypeButton and the button specified in detail is logically pressed or the grab_type is GrabtypeKeysym and the keysym specified in detail is logically pressed, and - the grab_window contains the pointer, and - a passive grab on the same button/keysym + modifier combination does not exist on an ancestor of grab_window. Otherwise, if grab_type is GrabtypeEnter or GrabtypeFocusIn, the device is actively grabbed if: - the device is not actively grabbed, and - the specified modifier keys are down, and - the grab_type is GrabtypeEnter and the device's pointer has moved into grab_window or a descendant of grab_window, or the grab_type is GrabtypeFocusIn and the device's focus has been set to the grab_window or a descendant of grab_window, - a passive grab of the same grab_type + modifier combination does not does not exist on an ancestor of grab_window. A modifier of GrabAnyModifier is equivalent to issuing the request for all possible modifier combinations (including no modifiers). A client may request a grab for GrabAnyModifier and explicit modifier combinations in the same request. A GrabtypeButton or GrabtypeKeyboard grab is released when all buttons or keysyms are released, independent of the state of modifier keys. A GrabtypeEnter or GrabtypeFocusIn grab is released when the pointer or focus leaves the window and all of its descendants, independent of the state of modifier keys. Note that the logical state of a device (as seen by means of the protocol) may lag the physical state if device event processing is frozen. This request overrides all previous passive grabs by the same client on the same button/key/enter/focus in + modifier combinations on the same window. If some other client already has issued a XIPassiveGrabDevice request with the same button or keysym and modifier combination, the failed modifier combinations is returned in modifiers_return. If some other client already has issued an XIPassiveGrabDevice request of grab_type XIGrabtypeEnter or XIGrabtypeFocusIn with the same grab_window and the same modifier combination, the failed modifier combinations are returned in modifiers_return. If num_modifiers_return is zero, all passive grabs have been successful. If a button grab or enter grab activates, EnterNotify and LeaveNotify events with mode Grab are generated as if the pointer were to suddenly warp from its current position some position in the grab_window. However, the pointer does not warp, and the pointer position is used as both the initial and final positions for the events. If a keysym grab or focus grab activates, FocusIn and FocusOut events with mode Grab are generated as if the focus were to change from the current window to the grab_window. If an enter or focus in grab activates, additional EnterNotify events with mode XIPassiveGrabNotify are generated as if the pointer or focus were to suddenly warp from its current position to some position in the grab window. These events are sent to the grabbing client only and only if the grab event mask has selected for it. If such a passive grab deactivates, addional LeaveNotify events with mode XIPassiveUngrabNotify are generated and sent to the grabbing client before the grab deactivates. ┌─── XIPassiveUngrabDevice deviceid: DEVICEID detail: CARD32 grab_type: GRABTYPE grab_window: Window num_modifiers: INT16 modifiers: MODIFIERINFO └─── Release an explicit passive grab on the specified input device. deviceid The device to establish the passive grab on. detail The button number or key symbol to ungrab. Must be 0 for GrabtypeEnter and GrabtypeFocusIn. grab_type The type of grab to establish. grab_window Events are reported relative to the grab window. modifiers XKB modifier state to activate this passive grab. num_modifiers Number of elements in modifiers. This request has no effect if the client does not have a passive grab of the same type, same button or keysym (if applicable) and modifier combination on the grab_window. ┌─── XIListProperties deviceid: DEVICEID ▶ num_properties: INT16 properties: LISTofATOM └─── List the properties associated with the given device. deviceid The device to list the properties for. num_atoms Number of atoms in the reply atoms All properties on the device. ┌─── XIChangeProperty deviceid: DEVICEID property: ATOM type: ATOM format: { 8, 16, 32 } mode: { Append, Prepend, Replace } num_items: CARD32 data: LISTofINT8, or LISTofINT16, or LISTofINT32 └─── Change the given property on the given device. deviceid The device to change the property on. property The property to modify. type The property's type. mode One of Append, Prepend, or Replace num_items Number of items following this request. data Property data (nitems * format/8 bytes) The type is uninterpreted by the server. The format specifies whether the data should be viewed as a list of 8-bit, 16-bit, or 32-bit quantities so that the server can correctly byte-swap as necessary. If the mode is Replace, the previous propert y value is discarded. If the mode is Prepend or Append, then the type and format must match the existing property value (or a Match error results). If the property is undefined, it is treated as defined with the correct type and format with zero-length data. For Prepend, the data is tacked on to the beginning of the existing data, and for Append, it is tacked on to the end of the existing data. The lifetime of a property is not tied to the storing client. Properties remain until explicitly deleted, until the device is removed, or until server reset. A property cannot be deleted by setting nitems to zero. To delete a property, use XIDeleteDeviceProperty. This request generates an XIPropertyEvent. ┌─── XIDeleteProperty deviceid: DEVICEID property: ATOM └─── Deletes the given property on the given device. deviceid The device to delete the property on. property The property to delete. If the property is deleted, an XIPropertyEvent is generated on the device. If the property does not exist, this request does nothing. ┌─── XIGetProperty deviceid: DEVICEID property: ATOM type: Atom or AnyPropertyType offset: CARD32 len: CARD32 delete: BOOL ▶ type: Atom bytes_after: CARD32 num_items: CARD32 format: { 8, 16, 32 } data: LISTofINT8, or LISTofINT16, or LISTofINT32 └─── Get the data for the given property on the given device. deviceid The device to retrieve the property data from. property The property to retrieve the data from.. type The property type to retrieve or AnyPropertyType offset The offset in 4-byte units. len Number of bytes to receive in 4-byte units. delete Delete the property after retrieving the data. bytes_after Number of unread bytes in the stored property num_items Number of items in data format 8, 16, or 32 data Property data (nitems * format/8 bytes) If the specified property does not exist for the specified device, then the return type is None, the format and bytes-after are zero, and the value is empty. The delete argument is ignored in this case. If the specified property exists but its type does not match the specified type, then the return type is the actual type of the property, the format is the actual format of the property (never zero), the bytes-after is the length of the property in bytes (even if the format is 16 or 32), and the value is empty. The delete argument is ignored in this case. If the specified property exists and either AnyPropertyType is specified or the specified type matches the actual type of the property, then the return type is the actual type of the property, the format is the actual format of the property (never zero), and the bytes-after and value are as follows, given: N = actual length of the stored property in bytes (even if the format is 16 or 32) I = 4 * long-offset T = N−I L = MINIMUM(T, 4 * long-length) A = N − (I + L) The returned value starts at byte index I in the property (indexing from 0), and its length in bytes is L. However, it is a Value error if offset is given such that L is negative. The value of bytes_after is A, giving the number of trailing unread bytes in the stored property. If delete is True and the bytes_after is zero, the property is also deleted from the device, and a XIPropertyNotify event is generated on the device. 8. Events: An event specifies its length in 4-byte units after the initial 32 bytes. Future versions of the protocol may provide additional information in the same event, thus increasing the event size. Clients are required to always read the number of bytes specified by the event, not the size of the event they may have been compiled against. The following event types are available in XI2. Version 2.0: HierarchyChanged DeviceChanged KeyPress KeyRelease ButtonPress ButtonRelease Motion RawEvent Enter Leave All events have a set of common fields specified as EVENTHEADER. EVENTHEADER { type: BYTE extension: BYTE sequenceNumber: CARD16 length: CARD32 evtype: CARD16 deviceid: DEVICEID time: Time } type Always GenericEvent. extension Always the X Input extension offset. sequenceNumber Sequence number of last request processed by the server. length Length in 4-byte units after the initial 32 bytes. evtype XI-specific event type. deviceid Numerical device id for a device. time Time in ms. ┌─── HierarchyEvent: EVENTHEADER flags: SETofHIERARCHYMASK num_info: CARD16 info: LISTofHIERARCHYINFO └─── HIERARCHYMASK { MasterAdded, MasterRemoved, SlaveAttached, SlaveDetached, SlaveAdded, SlaveRemoved, DeviceEnabled, DeviceDisabled } HIERARCHYINFO { deviceid: DEVICEID, attachment: DEVICEID, type: DEVICEUSE enabled: BOOL flags: SETofHIERARCHYMASK} flags Set of the changes that have occured, causing this event. num_info The number of device info structs following the request. info: The current hierarchy information. An XIHierarchyEvent is sent whenever the device hierarchy been changed. The 'flags' specify all types of hierarchy modifiations that have occured. For all devices, 'info' details the hierarchy information after the modification of the hierarchy has occured. For each device specified with 'deviceid': - if 'type' is MasterPointer or MasterKeyboard, 'attachment' decribes the pairing of this device. - if 'type' is SlavePointer or SlaveKeyboard, 'attachment' describes the master device this device is attached to. - if 'type' is FloatingSlave device, 'attachment' is undefined. enabled TRUE if the device is enabled and can send events. A disabled master device will not forward events from an attached, enabled slave device. Note: Multiple devices may be affected in one hierarchy change, 'deviceid' in an XIHierarchyEvent is always the first affected device. Clients should ignore deviceid and instead use the 'devices' list. ┌─── DeviceChangedEvent: EVENTHEADER reason: CHANGEREASON source: DEVICEID num_classes: CARD16 classes: LISTofCLASS └─── CHANGEREASON { SlaveSwitch, DeviceChange } A DeviceChangeEvent is sent whenever a device changes it's capabilities. This can happen either by a new slave device sending events through a master device, or by a physical device changing capabilities at runtime. reason The reason for generating this event. If 'reason' is SlaveSwitch, the slave device sending events through this device has changed and 'source' specifies the new slave device. A SlaveSwitch 'reason' can only occur on a master device. If 'reason' is DeviceChange, the device itself has changed through other means (e.g. a physical device change) and 'source' is undefined. source The source of the new classes. Only defined in 'reason' is SlaveSwitch. num_classes Number of 'classes' provided. classes Details the available classes provided by the device. The order the classes are provided in is undefined. For a detailed description of 'classes', see the XQueryInputDevice request. ┌─── DeviceEvent: EVENTHEADER detail: CARD32 root: Window event: Window child: Window root_x: FP1616 root_y: FP1616 event_x: FP1616 event_y: FP1616 buttons_len: CARD16 valuators_len: CARD16 sourceid: DEVICEID mods: MODIFIERINFO group: GROUPINFO buttons: SETofBUTTONMASK valuators: SETofVALUATORMASK axisvalues: LISTofFP3232 └─── BUTTONBIT { (1 << Button1), (1 << Button2), ... , (1 << ButtonN) } VALUATORBIT { (1 << 1), ( 1 << 2), ... ( 1 << n) } MODIFIERINFO { base_mods: CARD32, latched_mods: CARD32, locked_mods: CARD32, effective_mods: CARD32} GROUPINFO { base_group: CARD8, latched_group: CARD8, locked_group: CARD8, effective_group: CARD8} An XIDeviceEvent is generated whenever the logical state of a device changes in response to a button press, a button release, a motion, a key press or a key release. detail The button number or key code, or 0. root event child The root window, event window or subwindow, respectively. See core protocol specification for more detail. root_x root_y The position of the pointer in screen coordinates (16.16 fixed point). event_x event_y The position of the pointer in screen coordinates relative to the event window (16.16 fixed point). buttons_len The length of 'buttons' in 4 byte units. valuators_len The length of 'valuators' in 4 byte units. sourceid The source device that originally generated the event. mods XKB modifier state before the event occured. group XKB group state before the event. buttons Button state before the event. valuators Bitmask of valuators provided in 'axisvalues'. axisvalues Valuator data in device-native resolution. Modifier state in 'mods' is detailed as follows: base_mods XKB base modifier state. latched_mods XKB latched modifier state. locked_mods XKB locked modifier state. Group state in 'group' is detailed as follows: base_group XKB base group state. latched_group XKB latched group state. locked_group XKB locked group state. ┌─── RawEvent EVENTHEADER eventtype: RAWTYPE detail: CARD32 valuators_len: CARD16 valuators: SETofVALUATORMASK axisvalues: LISTofFP3232 axisvalues_raw: LISTofFP3232 └─── RAWTYPE { Motion, KeyPress, KeyRelease, ButtonPress, ButtonRelease } A RawDevice event provides the information provided by the driver to the client. RawDevice events are only generated for slave devices and provide both the raw data as supplied by the driver and transformed data as used in the server. Transformations include, but are not limited to, axis clipping and acceleration. Transformed valuator data may be equivalent to raw data. In this case, both raw and transformed valuator data is provided. RawEvents are sent exclusively to all root windows or to the client that grabbed the device only. eventtype The type of event that occured on the device. detail The button number or keycode. valuators_len The length of 'valuators' in 4 byte units. valuators Bitmask of valuators provided in 'axisvalues' and 'axisvalues_raw'. axisvalues Valuator data in device-native resolution. axisvalues_raw Untransformed valuator data in device-native resolution. ┌─── Enter or Leave or FocusIn or FocusOut EVENTHEADER root: Window event: Window child: Window sourceid: DEVICEID root_x: FP1616 root_y: FP1616 event_x FP1616 event_y: FP1616 mode: NOTIFYMODE detail: NOTIFYDETAIL same_screen: BOOL focus: BOOL mods: MODIFIERINFO group: GROUPINFO buttons_len: CARD16 buttons: SETofBUTTONMASK └─── NOTIFYMODE { Normal, Grab, Ungrab } NOTIFYDETAIL { Ancestor, Virtual, Inferior, Nonlinear, NonlinearVirtual, Pointer, PointerRoot, None } Enter or Leave events are sent whenever a device's pointer enters or leaves a window. FocusIn or FocusOut events are sent whenever a device's focus is set to or away from a window. The enter/leave and focus in/out model is described in the core protocol specification, Section 11. (EnterNotify, LeaveNotify events). For enter and leave events, the modifier and group state is the state of the paired master device if the device is a master device, or the state of the attached master keyboard if the device is an attached slave device, or zero if the device is a floating slave device. For focus in and out events, the button state is the state of the paired master device if the device is a master device, or the state of the attached master keyboard if the device is an attached slave device, or zero if the device is a floating slave device. root event child The root window, event window, and child window, respectively. See the core protocol specification for more detail. sourceid The device that caused the pointer to move. root_x root_y The pointer coordinates relative to the root window. event_x event_y The pointer coordinates relative to the event window. mode Normal pointer motion events have mode Normal. Pseudo-motion events when a grab activates have mode Grab, and pseudo-motion events when a grab deactivates have mode Ungrab. Pseudo-motion events caused by the activation or deactivation of a passive enter or focus in grab have mode XIPassiveGrabNotify or XIPassiveUngrabNotify. detail Specifies the relation of the event window to the window the pointer entered or left. See the core protocol spec for details. same_screen TRUE if the event window is on the same screen as the pointer's root window. focus If the event window is the focus window or an inferior of the focus window, then focus is True. Otherwise, focus is False. This field is unspecified for focus in/out events. mods XKB modifier state before the event occured. group XKB group state before the event. buttons_len The length of 'buttons' in 4 byte units. buttons Button state before the event. ┌─── XIPropertyEvent EVENTHEADER property: ATOM what: { PropertyCreated, PropertyDeleted, PropertyModified } └─── XIPropertyEvents are sent whenever a device property is created, deleted or modified by a client. property The property that has been created, deleted, or modified what Specifies what has been changed. ❧❧❧❧❧❧❧❧❧❧❧