this file is now known as ses.h

ok krw@ marco@ beck@

1 files changed, 0 insertions, 171 deletions

diff --git a/sys/scsi/scsi_ses.h b/sys/scsi/scsi_ses.h
deleted file mode 100644
index 82d595af9c4..00000000000
--- a/sys/scsi/scsi_ses.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* $OpenBSD: scsi_ses.h,v 1.3 2005/04/12 20:44:18 marco Exp $ */
-/*
- * Copyright (c) 2005 Marco Peereboom
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-
-#ifndef _SCSI_SES_H_
-#define _SCSI_SES_H_
-
-/* FIXME add all other elements as well currently this only contains "device" */
-
-struct ses_config_page {
-	/* diagnostic page header */
-	u_int8_t page_code;
-#define SES_CFG_DIAG_PAGE (0x01)
-	u_int8_t nr_sub_enc;
-	u_int8_t length[2]; /* n - 3 */
-	u_int8_t gencode[4];
-	/* enclosure descriptor header */
-	u_int8_t rsvd;
-	u_int8_t sub_enc_id;
-	u_int8_t nr_elem_typ; /* = T */
-	u_int8_t enc_desc_len; /* = m */
-	/* enclosure descriptor */
-	u_int8_t enc_logical_id[8];
-	u_int8_t enc_vendor_id[8];
-	u_int8_t prod_id[16];
-	u_int8_t prod_rev[4];
-	u_int8_t vendor[0]; /* 48 - (11 + m) */
-	/* type descriptor header list */
-	/* ses_type_descr_hdr[T] */
-	/* type descriptor text */
-	/* variable, length n */
-};
-
-struct ses_type_desc_hdr {
-	u_int8_t elem_type;
-#define STDH_UNSPECIFIED	(0x00)
-#define STDH_DEVICE		(0x01)
-#define STDH_POWER_SUPPLY	(0x02)
-#define STDH_COOLING		(0x03)
-#define STDH_TEMP_SENSOR	(0x04)
-#define STDH_DOOR_LOCK		(0x05)
-#define STDH_AUDIBLE_ALARM	(0x06)
-#define STDH_ENC_SRVC_CTRL	(0x07)
-#define STDH_SCC_CTRL		(0x08)
-#define STDH_NONVOL_CACHE	(0x09)
-#define STDH_INV_OPER_REASON	(0x0a)
-#define STDH_UNINT_POWER_SUPP	(0x0b)
-#define STDH_DISPLAY		(0x0c)
-#define STDH_KEY_PAD		(0x0d)
-#define STDH_ENCLOSURE		(0x0e)
-#define STDH_SCSI_PORT_TRANS	(0x0f)
-#define STDH_LANGUAGE		(0x10)
-#define STDH_COMM_PORT		(0x11)
-#define STDH_VOLTAGE_SENSOR	(0x12)
-#define STDH_CURRENT_SENSOR	(0x13)
-#define STDH_SCSI_TARGET_PORT	(0x14)
-#define STDH_SCSI_INIT_PORT	(0x15)
-#define STDH_SIMP_SUBENC	(0x16)
-#define STDH_ARRAY_DEVICE	(0x17)
-	u_int8_t nr_elem;
-	u_int8_t sub_enc_id;
-	u_int8_t type_desc_len;
-};
-
-/* control structures, control structs are used when SENDING */
-struct ses_dev_elmt_ctrl_diag {
-	u_int8_t common_ctrl;
-#define SDECD_RST_SWAP	(0x10)
-#define SDECD_DISABLE	(0x20)
-#define SDECD_PRDFAIL	(0x40)
-#define SDECD_SELECT	(0x80)
-
-	u_int8_t reserved;
-	u_int8_t byte3;
-#define SDECD_RQST_IDENT	(0x02)
-#define SDECD_RQST_REMOVE	(0x04)
-#define SDECD_RQST_INSERT	(0x08)
-#define SDECD_DONT_REMOVE	(0x40)
-#define SDECD_ACTIVE		(0x80)
-	u_int8_t byte4;
-#define SDECD_ENABLE_BYP_B	(0x04)
-#define SDECD_ENABLE_BYP_A	(0x08)
-#define SDECD_DEVICE_OFF	(0x10)
-#define SDECD_RQST_FAULT	(0x20)
-};
-
-struct ses_enc_ctrl_diag_page {
-	u_int8_t page_code;
-#define SES_CTRL_DIAG_PAGE (0x02)
-	u_int8_t byte2;
-#define SECDP_UNREC	(0x01)
-#define SECDP_CRIT	(0x02)
-#define SECDP_NONCRIT	(0x04)
-#define SECDP_INFO	(0x08)
-	u_int8_t length[2];
-	u_int8_t gencode[4];
-	u_int8_t overallctrl[4];
-	/* first element starts here */
-	struct ses_dev_elmt_ctrl_diag elmts[0];
-};
-
-/* status structures, status structs are uses when RECEIVING */
-/* device type, disk really */
-struct ses_dev_elmt_status_diag {
-	u_int8_t common_status;
-#define SDESD_UNSUPPORTED	(0x00)
-#define SDESD_OK		(0x01)
-#define SDESD_CRITICAL		(0x02)
-#define SDESD_NONCRITICAL	(0x03)
-#define SDESD_UNRECOVERABLE	(0x04)
-#define SDESD_NOT_INSTALLED	(0x05)
-#define SDESD_UNKNOWN		(0x06)
-#define SDESD_NOT_AVAILABLE	(0x07)
-	u_int8_t slot_addr;
-	u_int8_t byte3;
-#define SDESD_REPORT		(0x01)
-#define SDESD_IDENT		(0x02)
-#define SDESD_RMV		(0x04)
-#define SDESD_RDY_INSRT		(0x08)
-#define SDESD_ENC_BYP_B		(0x10)
-#define SDESD_ENC_BYP_A		(0x20)
-#define SDESD_DONT_REMV		(0x40)
-#define SDESD_CLNT_BYP_A	(0x80)
-	u_int8_t byte4;
-#define SDESD_DEV_BYP_B		(0x01)
-#define SDESD_DEV_BYP_A		(0x02)
-#define SDESD_BYP_B		(0x04)
-#define SDESD_BYP_A		(0x08)
-#define SDESD_DEV_OFF		(0x10)
-#define SDESD_FLT_RQSTD		(0x20)
-#define SDESD_FLT_SENSED	(0x40)
-#define SDESD_CLNT_BYP_B	(0x80)
-};
-
-struct ses_enc_stat_diag_page {
-	u_int8_t page_code;
-	u_int8_t byte2;
-#define SESDP_UNREC	(0x01)
-#define SESDP_CRIT	(0x02)
-#define SESDP_NONCRIT	(0x04)
-#define SESDP_INFO	(0x08)
-	u_int8_t length[2];
-	u_int8_t gencode[4];
-	u_int8_t overallstat[4];
-	struct ses_dev_elmt_status_diag elmts[0];
-};
-#endif /* _SCSI_SES_H_ */