Add drivers for the JMicron JMC250/JMC260 Ethernet controllers

and JMicron JMP202/JMP211 Ethernet PHYs.

Written by Pyun YongHyeon for FreeBSD, ported to DragonFlyBSD
by Sepherosa Ziehau and then ported to OpenBSD by me.

Thanks once again to JMicron for supplying hardware and
information which made this possible.

Some cleanup still needs to be done, and checksum offload
needs to be sorted out, but the driver otherwise seems
to work great.  Comitted over a JMC250 card.

12 files changed, 4243 insertions, 8 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index 49432463ea3..5a855748553 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -1,4 +1,4 @@
-#	$OpenBSD: Makefile,v 1.462 2008/09/09 15:46:17 henning Exp $
+#	$OpenBSD: Makefile,v 1.463 2008/09/26 10:35:15 jsg Exp $
 
 MAN=	aac.4 ac97.4 acphy.4 \
 	acpi.4 acpiac.4 acpiasus.4 acpibat.4 acpibtn.4 acpicpu.4 acpidock.4 \
@@ -27,7 +27,7 @@ MAN=	aac.4 ac97.4 acphy.4 \
 	iha.4 iic.4 inet.4 inet6.4 inphy.4 iop.4 iophy.4 ioprbs.4 \
 	iopsp.4 ip.4 ip6.4 ipcomp.4 ipgphy.4 ipmi.4 ips.4 ipsec.4 ipw.4 \
 	isa.4 isagpio.4 isapnp.4 isp.4 it.4 iwi.4 iwn.4 ix.4 ixgb.4 \
-	jmb.4 \
+	jmb.4 jme.4 jmphy.4 \
 	kate.4 km.4 ksyms.4 kue.4 lc.4 lge.4 lii.4 lkm.4 lm.4 \
 	lmc.4 lmenv.4 lmn.4 lmtemp.4 lo.4 lofn.4 lpt.4 lxtphy.4 luphy.4 \
 	maestro.4 mainbus.4 malo.4 maxds.4 maxtmp.4 mbg.4 midi.4 mii.4 mfi.4 \
diff --git a/share/man/man4/jme.4 b/share/man/man4/jme.4
new file mode 100644
index 00000000000..3f757e091e2
--- /dev/null
+++ b/share/man/man4/jme.4
@@ -0,0 +1,72 @@
+.\"	$OpenBSD: jme.4,v 1.1 2008/09/26 10:35:15 jsg Exp $
+.\"
+.\" Copyright (c) 2008 Jonathan Gray <jsg@openbsd.org>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd $Mdocdate: September 26 2008 $
+.Dt JME 4
+.Os
+.Sh NAME
+.Nm jme
+.Nd JMicron JMC250/JMC260 10/100/Gigabit Ethernet device
+.Sh SYNOPSIS
+.Cd "jme* at pci?"
+.Cd "jmphy* at mii?"
+.Sh DESCRIPTION
+The
+.Nm
+driver supports PCI Express Ethernet adapters based on the JMicron
+JMC260 10/100 and JMC250 10/100/Gigabit Ethernet chips.
+.Pp
+The following
+.Ar media
+types are supported:
+.Pp
+.Bl -tag -width autoselect -compact
+.It Cm autoselect
+Enable autoselection of the media type and options.
+.It Cm 10baseT
+Set 10Mbps operation.
+.It Cm 100baseTX
+Set 100Mbps (Fast Ethernet) operation.
+.It Cm 1000baseT
+Set 1000Mbps (Gigabit Ethernet) operation (some models only).
+.El
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr ifmedia 4 ,
+.Xr intro 4 ,
+.Xr jmphy 4 ,
+.Xr netintro 4 ,
+.Xr pci 4 ,
+.Xr hostname.if 5 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Ox 4.5 .
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Pyun YongHyeon
+for
+.Fx
+and ported to
+.Ox
+by
+.An Jonathan Gray
+.Aq jsg@openbsd.org .
diff --git a/share/man/man4/jmphy.4 b/share/man/man4/jmphy.4
new file mode 100644
index 00000000000..c4ffa8d28c4
--- /dev/null
+++ b/share/man/man4/jmphy.4
@@ -0,0 +1,52 @@
+.\"	$OpenBSD: jmphy.4,v 1.1 2008/09/26 10:35:15 jsg Exp $
+.\"
+.\" Copyright (c) 2008 Jonathan Gray <jsg@openbsd.org>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd $Mdocdate: September 26 2008 $
+.Dt JMPHY 4
+.Os
+.Sh NAME
+.Nm jmphy
+.Nd JMicron JMP202/JMP211 10/100/Gigabit Ethernet PHY
+.Sh SYNOPSIS
+.Cd "jmphy* at mii?"
+.Sh DESCRIPTION
+The
+.Nm
+driver supports the JMicron JMP202 10/100 and
+JMP211 10/100/Gigabit Ethernet PHYs.
+.Sh SEE ALSO
+.Xr ifmedia 4 ,
+.Xr intro 4 ,
+.Xr mii 4 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Ox 4.5 .
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Pyun YongHyeon
+for
+.Fx
+and ported to
+.Ox
+by
+.An Jonathan Gray
+.Aq jsg@openbsd.org .
diff --git a/share/man/man4/mii.4 b/share/man/man4/mii.4
index fbb097dd331..20b774c86d6 100644
--- a/share/man/man4/mii.4
+++ b/share/man/man4/mii.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mii.4,v 1.26 2008/06/26 05:42:06 ray Exp $
+.\"	$OpenBSD: mii.4,v 1.27 2008/09/26 10:35:15 jsg Exp $
 .\"	$NetBSD: mii.4,v 1.1 1998/11/04 05:21:50 thorpej Exp $
 .\"
 .\" Copyright (c) 1998 The NetBSD Foundation, Inc.
@@ -29,7 +29,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: June 26 2008 $
+.Dd $Mdocdate: September 26 2008 $
 .Dt MII 4
 .Os
 .Sh NAME
@@ -50,6 +50,7 @@
 .Cd "ipgphy* at mii?"
 .Cd "inphy* at mii?"
 .Cd "iophy* at mii?"
+.Cd "jmphy* at mii?"
 .Cd "luphy* at mii?"
 .Cd "lxtphy* at mii?"
 .Cd "mtdphy* at mii?"
@@ -114,6 +115,7 @@ program.
 .Xr intro 4 ,
 .Xr iophy 4 ,
 .Xr ipgphy 4 ,
+.Xr jmphy 4 ,
 .Xr luphy 4 ,
 .Xr lxtphy 4 ,
 .Xr mtdphy 4 ,
diff --git a/share/man/man4/pci.4 b/share/man/man4/pci.4
index 5c80e0a2c94..eaefd64430e 100644
--- a/share/man/man4/pci.4
+++ b/share/man/man4/pci.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pci.4,v 1.259 2008/09/17 06:26:13 brad Exp $
+.\"	$OpenBSD: pci.4,v 1.260 2008/09/26 10:35:15 jsg Exp $
 .\"	$NetBSD: pci.4,v 1.29 2000/04/01 00:32:23 tsarna Exp $
 .\"
 .\" Copyright (c) 2000 Theo de Raadt.  All rights reserved.
@@ -31,7 +31,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: September 17 2008 $
+.Dd $Mdocdate: September 26 2008 $
 .Dt PCI 4
 .Os
 .Sh NAME
@@ -200,6 +200,8 @@ Sun Happy Meal 10/100 Ethernet device
 Intel 82598 PCI Express 10Gb Ethernet device
 .It Xr ixgb 4
 Intel PRO/10GbE 10Gb Ethernet device
+.It Xr jme 4
+JMicron JMC250/JMC260 10/100/Gigabit Ethernet device
 .It Xr lge 4
 Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet device
 .It Xr lii 4
diff --git a/sys/dev/mii/files.mii b/sys/dev/mii/files.mii
index 87b67536c9d..866728f4b3e 100644
--- a/sys/dev/mii/files.mii
+++ b/sys/dev/mii/files.mii
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.mii,v 1.28 2008/09/25 20:47:16 brad Exp $
+#	$OpenBSD: files.mii,v 1.29 2008/09/26 10:35:15 jsg Exp $
 #	$NetBSD: files.mii,v 1.13 1998/11/05 00:36:48 thorpej Exp $
 
 file	dev/mii/mii.c				mii
@@ -129,6 +129,10 @@ device	etphy: mii_phy
 attach	etphy at mii
 file	dev/mii/etphy.c				etphy
 
+device	jmphy: mii_phy
+attach	jmphy at mii
+file	dev/mii/jmphy.c				jmphy
+
 device	atphy: mii_phy
 attach	atphy at mii
 file	dev/mii/atphy.c				atphy
diff --git a/sys/dev/mii/jmphy.c b/sys/dev/mii/jmphy.c
new file mode 100644
index 00000000000..261106d64bf
--- /dev/null
+++ b/sys/dev/mii/jmphy.c
@@ -0,0 +1,356 @@
+/*	$OpenBSD: jmphy.c,v 1.1 2008/09/26 10:35:15 jsg Exp $	*/
+/*-
+ * Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/mii/jmphy.c,v 1.1 2008/05/27 01:16:40 yongari Exp $
+ * $DragonFly: src/sys/dev/netif/mii_layer/jmphy.c,v 1.1 2008/07/22 11:28:49 sephe Exp $
+ */
+
+/*
+ * Driver for the JMicron JMP211 10/100/1000, JMP202 10/100 PHY.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/device.h>
+#include <sys/socket.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+#include <dev/mii/miidevs.h>
+#include <dev/mii/jmphyreg.h>
+
+int	jmphy_service(struct mii_softc *, struct mii_data *, int);
+void	jmphy_status(struct mii_softc *);
+int	jmphy_match(struct device *, void *, void *);
+void	jmphy_attach(struct device *, struct device *, void *);
+void	jmphy_reset(struct mii_softc *);
+uint16_t	jmphy_anar(struct ifmedia_entry *);
+int	jmphy_auto(struct mii_softc *, struct ifmedia_entry *);
+
+const struct mii_phy_funcs jmphy_funcs = {
+	jmphy_service, jmphy_status, jmphy_reset,
+};
+
+struct cfattach jmphy_ca = {
+	sizeof (struct mii_softc), jmphy_match, jmphy_attach,
+	mii_phy_detach, mii_phy_activate
+};
+
+struct cfdriver jmphy_cd = {
+	NULL, "jmphy", DV_DULL
+};
+
+static const struct mii_phydesc jmphys[] = {
+	{ MII_OUI_JMICRON,	MII_MODEL_JMICRON_JMP202,
+	  MII_STR_JMICRON_JMP202 },
+	{ MII_OUI_JMICRON,	MII_MODEL_JMICRON_JMP211,
+	  MII_STR_JMICRON_JMP211 },
+	{ 0,			0,
+	  NULL },
+};
+
+int
+jmphy_match(struct device *parent, void *match, void *aux)
+{
+	struct mii_attach_args *ma = aux;
+
+	if (mii_phy_match(ma, jmphys) != NULL)
+		return (10);
+
+	return (0);
+}
+
+void
+jmphy_attach(struct device *parent, struct device *self, void *aux)
+{
+	struct mii_softc *sc = (struct mii_softc *)self;
+	struct mii_attach_args *ma = aux;
+	struct mii_data *mii = ma->mii_data;
+	const struct mii_phydesc *mpd;
+
+	mpd = mii_phy_match(ma, jmphys);
+	printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
+
+	sc->mii_inst = mii->mii_instance;
+	sc->mii_phy = ma->mii_phyno;
+	sc->mii_funcs = &jmphy_funcs;
+	sc->mii_model = MII_MODEL(ma->mii_id2);
+	sc->mii_pdata = mii;
+	sc->mii_flags = ma->mii_flags;
+
+	sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP;
+
+	jmphy_reset(sc);
+
+	sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
+	if (sc->mii_capabilities & BMSR_EXTSTAT)
+		sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
+
+	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0 &&
+	    (sc->mii_extcapabilities & EXTSR_MEDIAMASK) == 0)
+		;
+	else
+		mii_phy_add_media(sc);
+}
+
+int
+jmphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
+{
+	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
+	uint16_t bmcr;
+
+	switch (cmd) {
+	case MII_POLLSTAT:
+		/*
+		 * If we're not polling our PHY instance, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
+			return (0);
+		break;
+
+	case MII_MEDIACHG:
+		/*
+		 * If the media indicates a different PHY instance,
+		 * isolate ourselves.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
+			bmcr = PHY_READ(sc, MII_BMCR);
+			PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO);
+			return (0);
+		}
+
+		/*
+		 * If the interface is not up, don't do anything.
+		 */
+		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
+			break;
+
+		if (jmphy_auto(sc, ife) != EJUSTRETURN)
+			return (EINVAL);
+		break;
+
+	case MII_TICK:
+		/*
+		 * If we're not currently selected, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
+			return (0);
+
+		/*
+		 * Is the interface even up?
+		 */
+		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
+			return (0);
+
+		/*
+		 * Only used for autonegotiation.
+		 */
+		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
+			break;
+
+		/* Check for link. */
+		if (PHY_READ(sc, JMPHY_SSR) & JMPHY_SSR_LINK_UP) {
+			sc->mii_ticks = 0;
+			break;
+		}
+
+		/* Announce link loss right after it happens. */
+		if (sc->mii_ticks++ == 0)
+			break;
+		if (sc->mii_ticks <= sc->mii_anegticks)
+			return (0);
+
+		sc->mii_ticks = 0;
+		jmphy_auto(sc, ife);
+		break;
+	}
+
+	/* Update the media status. */
+	jmphy_status(sc);
+
+	/* Callback if something changed. */
+	mii_phy_update(sc, cmd);
+	return (0);
+}
+
+void
+jmphy_status(struct mii_softc *sc)
+{
+	struct mii_data *mii = sc->mii_pdata;
+	int bmcr, ssr;
+
+	mii->mii_media_status = IFM_AVALID;
+	mii->mii_media_active = IFM_ETHER;
+
+	ssr = PHY_READ(sc, JMPHY_SSR);
+	if ((ssr & JMPHY_SSR_LINK_UP) != 0)
+		mii->mii_media_status |= IFM_ACTIVE;
+
+	bmcr = PHY_READ(sc, MII_BMCR);
+	if ((bmcr & BMCR_ISO) != 0) {
+		mii->mii_media_active |= IFM_NONE;
+		mii->mii_media_status = 0;
+		return;
+	}
+
+	if ((bmcr & BMCR_LOOP) != 0)
+		mii->mii_media_active |= IFM_LOOP;
+
+	if ((ssr & JMPHY_SSR_SPD_DPLX_RESOLVED) == 0) {
+		/* Erg, still trying, I guess... */
+		mii->mii_media_active |= IFM_NONE;
+		return;
+	}
+
+	switch ((ssr & JMPHY_SSR_SPEED_MASK)) {
+	case JMPHY_SSR_SPEED_1000:
+		mii->mii_media_active |= IFM_1000_T;
+		/*
+		 * jmphy(4) got a valid link so reset mii_ticks.
+		 * Resetting mii_ticks is needed in order to
+		 * detect link loss after auto-negotiation.
+		 */
+		sc->mii_ticks = 0;
+		break;
+	case JMPHY_SSR_SPEED_100:
+		mii->mii_media_active |= IFM_100_TX;
+		sc->mii_ticks = 0;
+		break;
+	case JMPHY_SSR_SPEED_10:
+		mii->mii_media_active |= IFM_10_T;
+		sc->mii_ticks = 0;
+		break;
+	default:
+		mii->mii_media_active |= IFM_NONE;
+		return;
+	}
+
+	if ((ssr & JMPHY_SSR_DUPLEX) != 0)
+		mii->mii_media_active |= IFM_FDX;
+	else
+		mii->mii_media_active |= IFM_HDX;
+	/* XXX Flow-control. */
+#ifdef notyet
+	if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
+		if ((PHY_READ(sc, MII_100T2SR) & GTSR_MS_RES) != 0)
+			mii->mii_media_active |= IFM_ETH_MASTER;
+	}
+#endif
+}
+
+void
+jmphy_reset(struct mii_softc *sc)
+{
+	int i;
+
+	/* Disable sleep mode. */
+	PHY_WRITE(sc, JMPHY_TMCTL,
+	    PHY_READ(sc, JMPHY_TMCTL) & ~JMPHY_TMCTL_SLEEP_ENB);
+	PHY_WRITE(sc, MII_BMCR, BMCR_RESET | BMCR_AUTOEN);
+
+	for (i = 0; i < 1000; i++) {
+		DELAY(1);
+		if ((PHY_READ(sc, MII_BMCR) & BMCR_RESET) == 0)
+			break;
+	}
+}
+
+uint16_t
+jmphy_anar(struct ifmedia_entry *ife)
+{
+	uint16_t anar;
+
+	anar = 0;
+	switch (IFM_SUBTYPE(ife->ifm_media)) {
+	case IFM_AUTO:
+		anar |= ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10;
+		break;
+	case IFM_1000_T:
+		break;
+	case IFM_100_TX:
+		anar |= ANAR_TX | ANAR_TX_FD;
+		break;
+	case IFM_10_T:
+		anar |= ANAR_10 | ANAR_10_FD;
+		break;
+	default:
+		break;
+	}
+
+	return (anar);
+}
+
+int
+jmphy_auto(struct mii_softc *sc, struct ifmedia_entry *ife)
+{
+	uint16_t anar, bmcr, gig;
+
+	gig = 0;
+	bmcr = PHY_READ(sc, MII_BMCR);
+	switch (IFM_SUBTYPE(ife->ifm_media)) {
+	case IFM_AUTO:
+		gig |= GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX;
+		break;
+	case IFM_1000_T:
+		gig |= GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX;
+		break;
+	case IFM_100_TX:
+	case IFM_10_T:
+		break;
+	case IFM_NONE:
+		PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO | BMCR_PDOWN);
+		return (EJUSTRETURN);
+	default:
+		return (EINVAL);
+	}
+
+	if ((ife->ifm_media & IFM_LOOP) != 0)
+		bmcr |= BMCR_LOOP;
+
+	anar = jmphy_anar(ife);
+	/* XXX Always advertise pause capability. */
+	anar |= (3 << 10);
+
+	if ((sc->mii_flags & MIIF_HAVE_GTCR) != 0) {
+#ifdef notyet
+		struct mii_data *mii;
+
+		mii = sc->mii_pdata;
+		if ((mii->mii_media.ifm_media & IFM_ETH_MASTER) != 0)
+			gig |= GTCR_MAN_MS | GTCR_MAN_ADV;
+#endif
+		PHY_WRITE(sc, MII_100T2CR, gig);
+	}
+	PHY_WRITE(sc, MII_ANAR, anar | ANAR_CSMA);
+	PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_AUTOEN | BMCR_STARTNEG);
+
+	return (EJUSTRETURN);
+}
diff --git a/sys/dev/mii/jmphyreg.h b/sys/dev/mii/jmphyreg.h
new file mode 100644
index 00000000000..d8f58366f25
--- /dev/null
+++ b/sys/dev/mii/jmphyreg.h
@@ -0,0 +1,115 @@
+/*	$OpenBSD: jmphyreg.h,v 1.1 2008/09/26 10:35:15 jsg Exp $	*/
+/*-
+ * Copyright (c) 2008, Pyun YongHyeon
+ * All rights reserved.
+ *              
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:             
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.  
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/mii/jmphyreg.h,v 1.1 2008/05/27 01:16:40 yongari Exp $
+ * $DragonFly: src/sys/dev/netif/mii_layer/jmphyreg.h,v 1.2 2008/09/13 04:04:39 sephe Exp $
+ */
+
+#ifndef	_DEV_MII_JMPHYREG_H_
+#define	_DEV_MII_JMPHYREG_H_
+
+/*
+ * Registers for the JMicron JMC250 Gigabit PHY.
+ */
+
+/* PHY specific status register. */
+#define JMPHY_SSR			0x11
+#define JMPHY_SSR_SPEED_1000		0x8000
+#define JMPHY_SSR_SPEED_100		0x4000
+#define JMPHY_SSR_SPEED_10		0x0000
+#define JMPHY_SSR_SPEED_MASK		0xC000
+#define JMPHY_SSR_DUPLEX		0x2000
+#define JMPHY_SSR_SPD_DPLX_RESOLVED	0x0800
+#define JMPHY_SSR_LINK_UP		0x0400
+#define JMPHY_SSR_MDI_XOVER		0x0040
+#define	JMPHY_SSR_INV_POLARITY		0x0002
+
+/* PHY specific cable length status register. */
+#define	JMPHY_SCL			0x17
+#define	JMPHY_SCL_CHAN_D_MASK		0xF000
+#define	JMPHY_SCL_CHAN_C_MASK		0x0F00
+#define	JMPHY_SCL_CHAN_B_MASK		0x00F0
+#define	JMPHY_SCL_CHAN_A_MASK		0x000F
+#define	JMPHY_SCL_LEN_35		0
+#define	JMPHY_SCL_LEN_40		1
+#define	JMPHY_SCL_LEN_50		2
+#define	JMPHY_SCL_LEN_60		3
+#define	JMPHY_SCL_LEN_70		4
+#define	JMPHY_SCL_LEN_80		5
+#define	JMPHY_SCL_LEN_90		6
+#define	JMPHY_SCL_LEN_100		7
+#define	JMPHY_SCL_LEN_110		8
+#define	JMPHY_SCL_LEN_120		9
+#define	JMPHY_SCL_LEN_130		10
+#define	JMPHY_SCL_LEN_140		11
+#define	JMPHY_SCL_LEN_150		12
+#define	JMPHY_SCL_LEN_160		13
+#define	JMPHY_SCL_LEN_170		14
+#define	JMPHY_SCL_RSVD			15
+
+/* PHY specific LED control register 1. */
+#define	JMPHY_LED_CTL1			0x18
+#define	JMPHY_LED_BLINK_42MS		0x0000
+#define	JMPHY_LED_BLINK_84MS		0x2000
+#define	JMPHY_LED_BLINK_170MS		0x4000
+#define	JMPHY_LED_BLINK_340MS		0x6000
+#define	JMPHY_LED_BLINK_670MS		0x8000
+#define	JMPHY_LED_BLINK_MASK		0xE000
+#define	JMPHY_LED_FLP_GAP_MASK		0x1F00
+#define	JMPHY_LED_FLP_GAP_DEFULT	0x1000
+#define	JMPHY_LED2_POLARITY_MASK	0x0030
+#define	JMPHY_LED1_POLARITY_MASK	0x000C
+#define	JMPHY_LED0_POLARITY_MASK	0x0003
+#define	JMPHY_LED_ON_LO_OFF_HI		0
+#define	JMPHY_LED_ON_HI_OFF_HI		1
+#define	JMPHY_LED_ON_LO_OFF_TS		2
+#define	JMPHY_LED_ON_HI_OFF_TS		3
+
+/* PHY specific LED control register 2. */
+#define	JMPHY_LED_CTL2			0x19
+#define	JMPHY_LED_NO_STRETCH		0x0000
+#define	JMPHY_LED_STRETCH_42MS		0x2000
+#define	JMPHY_LED_STRETCH_84MS		0x4000
+#define	JMPHY_LED_STRETCH_170MS		0x6000
+#define	JMPHY_LED_STRETCH_340MS		0x8000
+#define	JMPHY_LED_STRETCH_670MS		0xB000
+#define	JMPHY_LED_STRETCH_1300MS	0xC000
+#define	JMPHY_LED_STRETCH_2700MS	0xE000
+#define	JMPHY_LED2_MODE_MASK		0x0F00
+#define	JMPHY_LED1_MODE_MASK		0x00F0
+#define	JMPHY_LED0_MODE_MASK		0x000F
+
+/* PHY specific test mode control register. */
+#define	JMPHY_TMCTL			0x1A
+#define	JMPHY_TMCTL_SLEEP_ENB		0x1000
+
+/* PHY specific configuration */
+#define JMPHY_CONF			0x1B
+#define JMPHY_CONF_EXTFIFO		0x0000 /* use extended fifo */
+#define JMPHY_CONF_DEFFIFO		0x0004 /* use default fifo */
+
+#endif	/* _DEV_MII_JMPHYREG_H_ */
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci
index c7d16768808..c5b254d04b6 100644
--- a/sys/dev/pci/files.pci
+++ b/sys/dev/pci/files.pci
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.pci,v 1.256 2008/09/17 06:18:45 brad Exp $
+#	$OpenBSD: files.pci,v 1.257 2008/09/26 10:35:15 jsg Exp $
 #	$NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $
 #
 # Config file and device description for machine-independent PCI code.
@@ -627,6 +627,11 @@ device	et: ether, ifnet, mii, ifmedia, mii_phy
 attach	et at pci
 file	dev/pci/if_et.c			et
 
+# JMicron JMC250/JMC260 Ethernet
+device	jme: ether, ifnet, mii, ifmedia, mii_phy
+attach	jme at pci
+file	dev/pci/if_jme.c		jme
+
 # AMD-76x PM and SMBus controller
 device	amdpm: i2cbus
 attach	amdpm at pci
diff --git a/sys/dev/pci/if_jme.c b/sys/dev/pci/if_jme.c
new file mode 100644
index 00000000000..493fcdf8396
--- /dev/null
+++ b/sys/dev/pci/if_jme.c
@@ -0,0 +1,2391 @@
+/*	$OpenBSD: if_jme.c,v 1.1 2008/09/26 10:35:15 jsg Exp $	*/
+/*-
+ * Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/jme/if_jme.c,v 1.2 2008/07/18 04:20:48 yongari Exp $
+ * $DragonFly: src/sys/dev/netif/jme/if_jme.c,v 1.7 2008/09/13 04:04:39 sephe Exp $
+ */
+
+#include "bpfilter.h"
+#include "vlan.h"
+
+#include <sys/param.h>
+#include <sys/endian.h>
+#include <sys/systm.h>
+#include <sys/types.h>
+#include <sys/sockio.h>
+#include <sys/mbuf.h>
+#include <sys/queue.h>
+#include <sys/kernel.h>
+#include <sys/device.h>
+#include <sys/timeout.h>
+#include <sys/socket.h>
+
+#include <machine/bus.h>
+
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <net/if_media.h>
+
+#ifdef INET
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/in_var.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+#endif
+
+#if NVLAN > 0
+#include <net/if_types.h>
+#include <net/if_vlan_var.h>
+#endif
+
+#if NBPFILTER > 0
+#include <net/bpf.h>
+#endif
+
+#include <dev/rndvar.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+#include <dev/mii/jmphyreg.h>
+
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcidevs.h>
+
+#include <dev/pci/if_jmereg.h>
+#include <dev/pci/if_jmevar.h>
+
+/* Define the following to disable printing Rx errors. */
+#undef	JME_SHOW_ERRORS
+
+//#define	JME_CSUM_FEATURES	(CSUM_IP | CSUM_TCP | CSUM_UDP)
+
+int	jme_match(struct device *, void *, void *);
+void	jme_attach(struct device *, struct device *, void *);
+int	jme_detach(struct device *, int);
+
+int	jme_miibus_readreg(struct device *, int, int);
+void	jme_miibus_writereg(struct device *, int, int, int);
+void	jme_miibus_statchg(struct device *);
+
+int	jme_init(struct ifnet *);
+int	jme_ioctl(struct ifnet *, u_long, caddr_t);
+
+void	jme_start(struct ifnet *);
+void	jme_watchdog(struct ifnet *);
+void	jme_mediastatus(struct ifnet *, struct ifmediareq *);
+int	jme_mediachange(struct ifnet *);
+
+int	jme_intr(void *);
+void	jme_txeof(struct jme_softc *);
+void	jme_rxeof(struct jme_softc *);
+
+int	jme_dma_alloc(struct jme_softc *);
+void	jme_dma_free(struct jme_softc *);
+int	jme_init_rx_ring(struct jme_softc *);
+void	jme_init_tx_ring(struct jme_softc *);
+void	jme_init_ssb(struct jme_softc *);
+int	jme_newbuf(struct jme_softc *, struct jme_rxdesc *, int);
+int	jme_encap(struct jme_softc *, struct mbuf **);
+void	jme_rxpkt(struct jme_softc *);
+
+void	jme_tick(void *);
+void	jme_stop(struct jme_softc *);
+void	jme_reset(struct jme_softc *);
+void	jme_set_vlan(struct jme_softc *);
+void	jme_set_filter(struct jme_softc *);
+void	jme_stop_tx(struct jme_softc *);
+void	jme_stop_rx(struct jme_softc *);
+void	jme_mac_config(struct jme_softc *);
+void	jme_reg_macaddr(struct jme_softc *, uint8_t[]);
+int	jme_eeprom_macaddr(struct jme_softc *, uint8_t[]);
+int	jme_eeprom_read_byte(struct jme_softc *, uint8_t, uint8_t *);
+void	jme_discard_rxbufs(struct jme_softc *, int, int);
+#ifdef notyet
+void	jme_setwol(struct jme_softc *);
+void	jme_setlinkspeed(struct jme_softc *);
+#endif
+
+/*
+ * Devices supported by this driver.
+ */
+const struct pci_matchid jme_devices[] = {
+	{ PCI_VENDOR_JMICRON, PCI_PRODUCT_JMICRON_JMC250 },
+	{ PCI_VENDOR_JMICRON, PCI_PRODUCT_JMICRON_JMC260 }
+};
+
+struct cfattach jme_ca = {
+	sizeof (struct jme_softc), jme_match, jme_attach
+};
+
+struct cfdriver jme_cd = {
+	NULL, "jme", DV_IFNET
+};
+
+int jmedebug = 0;
+#define DPRINTF(x)	do { if (jmedebug) printf x; } while (0)
+
+/*
+ *	Read a PHY register on the MII of the JMC250.
+ */
+int
+jme_miibus_readreg(struct device *dev, int phy, int reg)
+{
+	struct jme_softc *sc = (struct jme_softc *)dev;
+	uint32_t val;
+	int i;
+
+	/* For FPGA version, PHY address 0 should be ignored. */
+	if (sc->jme_caps & JME_CAP_FPGA) {
+		if (phy == 0)
+			return (0);
+	} else {
+		if (sc->jme_phyaddr != phy)
+			return (0);
+	}
+
+	CSR_WRITE_4(sc, JME_SMI, SMI_OP_READ | SMI_OP_EXECUTE |
+	    SMI_PHY_ADDR(phy) | SMI_REG_ADDR(reg));
+
+	for (i = JME_PHY_TIMEOUT; i > 0; i--) {
+		DELAY(1);
+		if (((val = CSR_READ_4(sc, JME_SMI)) & SMI_OP_EXECUTE) == 0)
+			break;
+	}
+	if (i == 0) {
+		printf("%s: phy read timeout: phy %d, reg %d\n",
+		    sc->sc_dev.dv_xname, phy, reg);
+		return (0);
+	}
+
+	return ((val & SMI_DATA_MASK) >> SMI_DATA_SHIFT);
+}
+
+/*
+ *	Write a PHY register on the MII of the JMC250.
+ */
+void
+jme_miibus_writereg(struct device *dev, int phy, int reg, int val)
+{
+	struct jme_softc *sc = (struct jme_softc *)dev;
+	int i;
+
+	/* For FPGA version, PHY address 0 should be ignored. */
+	if (sc->jme_caps & JME_CAP_FPGA) {
+		if (phy == 0)
+			return;
+	} else {
+		if (sc->jme_phyaddr != phy)
+			return;
+	}
+
+	CSR_WRITE_4(sc, JME_SMI, SMI_OP_WRITE | SMI_OP_EXECUTE |
+	    ((val << SMI_DATA_SHIFT) & SMI_DATA_MASK) |
+	    SMI_PHY_ADDR(phy) | SMI_REG_ADDR(reg));
+
+	for (i = JME_PHY_TIMEOUT; i > 0; i--) {
+		DELAY(1);
+		if (((val = CSR_READ_4(sc, JME_SMI)) & SMI_OP_EXECUTE) == 0)
+			break;
+	}
+	if (i == 0) {
+		printf("%s: phy write timeout: phy %d, reg %d\n",
+		    sc->sc_dev.dv_xname, phy, reg);
+	}
+}
+
+/*
+ *	Callback from MII layer when media changes.
+ */
+void
+jme_miibus_statchg(struct device *dev)
+{
+	struct jme_softc *sc = (struct jme_softc *)dev;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct mii_data *mii;
+	struct jme_txdesc *txd;
+	bus_addr_t paddr;
+	int i;
+
+	if ((ifp->if_flags & IFF_RUNNING) == 0)
+		return;
+
+	mii = &sc->sc_miibus;
+
+	sc->jme_flags &= ~JME_FLAG_LINK;
+	if ((mii->mii_media_status & IFM_AVALID) != 0) {
+		switch (IFM_SUBTYPE(mii->mii_media_active)) {
+		case IFM_10_T:
+		case IFM_100_TX:
+			sc->jme_flags |= JME_FLAG_LINK;
+			break;
+		case IFM_1000_T:
+			if (sc->jme_caps & JME_CAP_FASTETH)
+				break;
+			sc->jme_flags |= JME_FLAG_LINK;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/*
+	 * Disabling Rx/Tx MACs have a side-effect of resetting
+	 * JME_TXNDA/JME_RXNDA register to the first address of
+	 * Tx/Rx descriptor address. So driver should reset its
+	 * internal procucer/consumer pointer and reclaim any
+	 * allocated resources.  Note, just saving the value of
+	 * JME_TXNDA and JME_RXNDA registers before stopping MAC
+	 * and restoring JME_TXNDA/JME_RXNDA register is not
+	 * sufficient to make sure correct MAC state because
+	 * stopping MAC operation can take a while and hardware
+	 * might have updated JME_TXNDA/JME_RXNDA registers
+	 * during the stop operation.
+	 */
+
+	/* Disable interrupts */
+	CSR_WRITE_4(sc, JME_INTR_MASK_CLR, JME_INTRS);
+
+	/* Stop driver */
+	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
+	ifp->if_timer = 0;
+	timeout_del(&sc->jme_tick_ch);
+
+	/* Stop receiver/transmitter. */
+	jme_stop_rx(sc);
+	jme_stop_tx(sc);
+
+	jme_rxeof(sc);
+	if (sc->jme_cdata.jme_rxhead != NULL)
+		m_freem(sc->jme_cdata.jme_rxhead);
+	JME_RXCHAIN_RESET(sc);
+
+	jme_txeof(sc);
+	if (sc->jme_cdata.jme_tx_cnt != 0) {
+		/* Remove queued packets for transmit. */
+		for (i = 0; i < JME_TX_RING_CNT; i++) {
+			txd = &sc->jme_cdata.jme_txdesc[i];
+			if (txd->tx_m != NULL) {
+				bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+				m_freem(txd->tx_m);
+				txd->tx_m = NULL;
+				txd->tx_ndesc = 0;
+				ifp->if_oerrors++;
+			}
+		}
+	}
+
+	/*
+	 * Reuse configured Rx descriptors and reset
+	 * procuder/consumer index.
+	 */
+	sc->jme_cdata.jme_rx_cons = 0;
+
+	jme_init_tx_ring(sc);
+
+	/* Initialize shadow status block. */
+	jme_init_ssb(sc);
+
+	/* Program MAC with resolved speed/duplex/flow-control. */
+	if (sc->jme_flags & JME_FLAG_LINK) {
+		jme_mac_config(sc);
+
+		CSR_WRITE_4(sc, JME_RXCSR, sc->jme_rxcsr);
+		CSR_WRITE_4(sc, JME_TXCSR, sc->jme_txcsr);
+
+		/* Set Tx ring address to the hardware. */
+		paddr = JME_TX_RING_ADDR(sc, 0);
+		CSR_WRITE_4(sc, JME_TXDBA_HI, JME_ADDR_HI(paddr));
+		CSR_WRITE_4(sc, JME_TXDBA_LO, JME_ADDR_LO(paddr));
+
+		/* Set Rx ring address to the hardware. */
+		paddr = JME_RX_RING_ADDR(sc, 0);
+		CSR_WRITE_4(sc, JME_RXDBA_HI, JME_ADDR_HI(paddr));
+		CSR_WRITE_4(sc, JME_RXDBA_LO, JME_ADDR_LO(paddr));
+
+		/* Restart receiver/transmitter. */
+		CSR_WRITE_4(sc, JME_RXCSR, sc->jme_rxcsr | RXCSR_RX_ENB |
+		    RXCSR_RXQ_START);
+		CSR_WRITE_4(sc, JME_TXCSR, sc->jme_txcsr | TXCSR_TX_ENB);
+	}
+
+	ifp->if_flags |= IFF_RUNNING;
+	ifp->if_flags &= ~IFF_OACTIVE;
+	timeout_add_sec(&sc->jme_tick_ch, 1);
+
+	/* Reenable interrupts. */
+	CSR_WRITE_4(sc, JME_INTR_MASK_SET, JME_INTRS);
+}
+
+/*
+ *	Get the current interface media status.
+ */
+void
+jme_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
+{
+	struct jme_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+
+	mii_pollstat(mii);
+	ifmr->ifm_status = mii->mii_media_status;
+	ifmr->ifm_active = mii->mii_media_active;
+}
+
+/*
+ *	Set hardware to newly-selected media.
+ */
+int
+jme_mediachange(struct ifnet *ifp)
+{
+	struct jme_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+	int error;
+
+	if (mii->mii_instance != 0) {
+		struct mii_softc *miisc;
+
+		LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
+			mii_phy_reset(miisc);
+	}
+	error = mii_mediachg(mii);
+
+	return (error);
+}
+
+int
+jme_match(struct device *dev, void *match, void *aux)
+{
+	return pci_matchbyid((struct pci_attach_args *)aux, jme_devices,
+	    sizeof (jme_devices) / sizeof (jme_devices[0]));
+}
+
+int
+jme_eeprom_read_byte(struct jme_softc *sc, uint8_t addr, uint8_t *val)
+{
+	uint32_t reg;
+	int i;
+
+	*val = 0;
+	for (i = JME_TIMEOUT; i > 0; i--) {
+		reg = CSR_READ_4(sc, JME_SMBCSR);
+		if ((reg & SMBCSR_HW_BUSY_MASK) == SMBCSR_HW_IDLE)
+			break;
+		DELAY(1);
+	}
+
+	if (i == 0) {
+		printf("%s: EEPROM idle timeout!\n", sc->sc_dev.dv_xname);
+		return (ETIMEDOUT);
+	}
+
+	reg = ((uint32_t)addr << SMBINTF_ADDR_SHIFT) & SMBINTF_ADDR_MASK;
+	CSR_WRITE_4(sc, JME_SMBINTF, reg | SMBINTF_RD | SMBINTF_CMD_TRIGGER);
+	for (i = JME_TIMEOUT; i > 0; i--) {
+		DELAY(1);
+		reg = CSR_READ_4(sc, JME_SMBINTF);
+		if ((reg & SMBINTF_CMD_TRIGGER) == 0)
+			break;
+	}
+
+	if (i == 0) {
+		printf("%s: EEPROM read timeout!\n", sc->sc_dev.dv_xname);
+		return (ETIMEDOUT);
+	}
+
+	reg = CSR_READ_4(sc, JME_SMBINTF);
+	*val = (reg & SMBINTF_RD_DATA_MASK) >> SMBINTF_RD_DATA_SHIFT;
+
+	return (0);
+}
+
+int
+jme_eeprom_macaddr(struct jme_softc *sc, uint8_t eaddr[])
+{
+	uint8_t fup, reg, val;
+	uint32_t offset;
+	int match;
+
+	offset = 0;
+	if (jme_eeprom_read_byte(sc, offset++, &fup) != 0 ||
+	    fup != JME_EEPROM_SIG0)
+		return (ENOENT);
+	if (jme_eeprom_read_byte(sc, offset++, &fup) != 0 ||
+	    fup != JME_EEPROM_SIG1)
+		return (ENOENT);
+	match = 0;
+	do {
+		if (jme_eeprom_read_byte(sc, offset, &fup) != 0)
+			break;
+		/* Check for the end of EEPROM descriptor. */
+		if ((fup & JME_EEPROM_DESC_END) == JME_EEPROM_DESC_END)
+			break;
+		if ((uint8_t)JME_EEPROM_MKDESC(JME_EEPROM_FUNC0,
+		    JME_EEPROM_PAGE_BAR1) == fup) {
+			if (jme_eeprom_read_byte(sc, offset + 1, &reg) != 0)
+				break;
+			if (reg >= JME_PAR0 &&
+			    reg < JME_PAR0 + ETHER_ADDR_LEN) {
+				if (jme_eeprom_read_byte(sc, offset + 2,
+				    &val) != 0)
+					break;
+				eaddr[reg - JME_PAR0] = val;
+				match++;
+			}
+		}
+		/* Try next eeprom descriptor. */
+		offset += JME_EEPROM_DESC_BYTES;
+	} while (match != ETHER_ADDR_LEN && offset < JME_EEPROM_END);
+
+	if (match == ETHER_ADDR_LEN)
+		return (0);
+
+	return (ENOENT);
+}
+
+void
+jme_reg_macaddr(struct jme_softc *sc, uint8_t eaddr[])
+{
+	uint32_t par0, par1;
+
+	/* Read station address. */
+	par0 = CSR_READ_4(sc, JME_PAR0);
+	par1 = CSR_READ_4(sc, JME_PAR1);
+	par1 &= 0xFFFF;
+	if ((par0 == 0 && par1 == 0) || (par0 & 0x1)) {
+		printf("%s: generating fake ethernet address.\n",
+		    sc->sc_dev.dv_xname);
+		par0 = arc4random();
+		/* Set OUI to JMicron. */
+		eaddr[0] = 0x00;
+		eaddr[1] = 0x1B;
+		eaddr[2] = 0x8C;
+		eaddr[3] = (par0 >> 16) & 0xff;
+		eaddr[4] = (par0 >> 8) & 0xff;
+		eaddr[5] = par0 & 0xff;
+	} else {
+		eaddr[0] = (par0 >> 0) & 0xFF;
+		eaddr[1] = (par0 >> 8) & 0xFF;
+		eaddr[2] = (par0 >> 16) & 0xFF;
+		eaddr[3] = (par0 >> 24) & 0xFF;
+		eaddr[4] = (par1 >> 0) & 0xFF;
+		eaddr[5] = (par1 >> 8) & 0xFF;
+	}
+}
+
+void
+jme_attach(struct device *parent, struct device *self, void *aux)
+{
+	struct jme_softc *sc = (struct jme_softc *)self;
+	struct pci_attach_args *pa = aux;
+	pci_chipset_tag_t pc = pa->pa_pc;
+	pci_intr_handle_t ih;
+	const char *intrstr;
+	pcireg_t memtype;
+
+	struct ifnet *ifp;
+	uint32_t reg;
+//	uint8_t pcie_ptr;
+	int error = 0;
+//	uint8_t eaddr[ETHER_ADDR_LEN];
+
+	/*
+	 * Allocate IO memory
+	 *
+	 * JMC250 supports both memory mapped and I/O register space
+	 * access.  Because I/O register access should use different
+	 * BARs to access registers it's waste of time to use I/O
+	 * register spce access.  JMC250 uses 16K to map entire memory
+	 * space.
+	 */
+
+	memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, JME_PCIR_BAR);
+	if (pci_mapreg_map(pa, JME_PCIR_BAR, memtype, 0, &sc->jme_mem_bt,
+	    &sc->jme_mem_bh, NULL, &sc->jme_mem_size, 0)) {
+		printf(": could not map mem space\n");
+		return;
+	}
+
+	if (pci_intr_map(pa, &ih) != 0) {
+		printf(": could not map interrupt\n");
+		return;
+	}
+
+	/*
+	 * Allocate IRQ
+	 */
+	intrstr = pci_intr_string(pc, ih);
+	sc->sc_irq_handle = pci_intr_establish(pc, ih, IPL_NET, jme_intr, sc,
+	    sc->sc_dev.dv_xname);
+	if (sc->sc_irq_handle == NULL) {
+		printf(": could not establish interrupt");
+		if (intrstr != NULL)
+			printf(" at %s", intrstr);
+		printf("\n");
+		return;
+	}
+	printf(": %s", intrstr);
+
+	sc->sc_dmat = pa->pa_dmat;
+	sc->jme_pct = pa->pa_pc;
+	sc->jme_pcitag = pa->pa_tag;
+
+	/*
+	 * Extract FPGA revision
+	 */
+	reg = CSR_READ_4(sc, JME_CHIPMODE);
+	if (((reg & CHIPMODE_FPGA_REV_MASK) >> CHIPMODE_FPGA_REV_SHIFT) !=
+	    CHIPMODE_NOT_FPGA) {
+		sc->jme_caps |= JME_CAP_FPGA;
+
+		if (jmedebug) {
+			printf("%s: FPGA revision : 0x%04x\n",
+			    sc->sc_dev.dv_xname, 
+			    (reg & CHIPMODE_FPGA_REV_MASK) >>
+			    CHIPMODE_FPGA_REV_SHIFT);
+		}
+	}
+
+	/* Reset the ethernet controller. */
+	jme_reset(sc);
+
+	/* Get station address. */
+	reg = CSR_READ_4(sc, JME_SMBCSR);
+	if (reg & SMBCSR_EEPROM_PRESENT)
+		error = jme_eeprom_macaddr(sc, sc->sc_arpcom.ac_enaddr);
+	if (error != 0 || (reg & SMBCSR_EEPROM_PRESENT) == 0) {
+		if (error != 0 && (jmedebug)) {
+			printf("%s: ethernet hardware address "
+			    "not found in EEPROM.\n", sc->sc_dev.dv_xname);
+		}
+		jme_reg_macaddr(sc, sc->sc_arpcom.ac_enaddr);
+	}
+
+	printf(", address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr));
+
+	/*
+	 * Save PHY address.
+	 * Integrated JR0211 has fixed PHY address whereas FPGA version
+	 * requires PHY probing to get correct PHY address.
+	 */
+	if ((sc->jme_caps & JME_CAP_FPGA) == 0) {
+		sc->jme_phyaddr = CSR_READ_4(sc, JME_GPREG0) &
+		    GPREG0_PHY_ADDR_MASK;
+		if (jmedebug) {
+			printf("%s: PHY is at address %d.\n",
+			    sc->sc_dev.dv_xname, sc->jme_phyaddr);
+		}
+	} else {
+		sc->jme_phyaddr = 0;
+	}
+
+	/* Set max allowable DMA size. */
+	sc->jme_tx_dma_size = TXCSR_DMA_SIZE_512;
+	sc->jme_rx_dma_size = RXCSR_DMA_SIZE_128;
+
+#ifdef notyet
+	if (pci_find_extcap(dev, PCIY_PMG, &pmc) == 0)
+		sc->jme_caps |= JME_CAP_PMCAP;
+#endif
+
+	/* Allocate DMA stuffs */
+	error = jme_dma_alloc(sc);
+	if (error)
+		goto fail;
+
+	ifp = &sc->sc_arpcom.ac_if;
+	ifp->if_softc = sc;
+	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+	ifp->if_init = jme_init;
+	ifp->if_ioctl = jme_ioctl;
+	ifp->if_start = jme_start;
+	ifp->if_watchdog = jme_watchdog;
+	ifp->if_baudrate = IF_Gbps(1);
+	IFQ_SET_MAXLEN(&ifp->if_snd, JME_TX_RING_CNT - 1);
+	IFQ_SET_READY(&ifp->if_snd);
+	strlcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
+	printf("XNAME= '%s'\n", ifp->if_xname);
+
+	/* JMC250 supports Tx/Rx checksum offload and hardware vlan tagging. */
+#if 0
+	ifp->if_capabilities = IFCAP_HWCSUM |
+			       IFCAP_VLAN_MTU |
+			       IFCAP_VLAN_HWTAGGING;
+	ifp->if_hwassist = JME_CSUM_FEATURES;
+	ifp->if_capenable = ifp->if_capabilities;
+#endif
+	ifp->if_capabilities = IFCAP_VLAN_MTU;
+
+	/* Set up MII bus. */
+	sc->sc_miibus.mii_ifp = ifp;
+	sc->sc_miibus.mii_readreg = jme_miibus_readreg;
+	sc->sc_miibus.mii_writereg = jme_miibus_writereg;
+	sc->sc_miibus.mii_statchg = jme_miibus_statchg;
+
+	ifmedia_init(&sc->sc_miibus.mii_media, 0, jme_mediachange,
+	    jme_mediastatus);
+	mii_attach(self, &sc->sc_miibus, 0xffffffff, MII_PHY_ANY,
+	    MII_OFFSET_ANY, 0);
+
+	if (LIST_FIRST(&sc->sc_miibus.mii_phys) == NULL) {
+		printf("%s: no PHY found!\n", sc->sc_dev.dv_xname);
+		ifmedia_add(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_MANUAL,
+		    0, NULL);
+		ifmedia_set(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_MANUAL);
+	} else
+		ifmedia_set(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_AUTO);
+
+	/*
+	 * Save PHYADDR for FPGA mode PHY not handled, not production hw
+	 */
+
+	if_attach(ifp);
+	ether_ifattach(ifp);
+
+	timeout_set(&sc->jme_tick_ch, jme_tick, sc);
+
+	return;
+fail:
+	jme_detach(&sc->sc_dev, 0);
+}
+
+int
+jme_detach(struct device *self, int flags)
+{
+	struct jme_softc *sc = (struct jme_softc *)self;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	int s;
+
+	s = splnet();
+	jme_stop(sc);
+	splx(s);
+
+	mii_detach(&sc->sc_miibus, MII_PHY_ANY, MII_OFFSET_ANY);
+
+	/* Delete all remaining media. */
+	ifmedia_delete_instance(&sc->sc_miibus.mii_media, IFM_INST_ANY);
+
+	ether_ifdetach(ifp);
+	if_detach(ifp);
+	jme_dma_free(sc);
+
+	if (sc->sc_irq_handle != NULL) {
+		pci_intr_disestablish(sc->jme_pct, sc->sc_irq_handle);
+		sc->sc_irq_handle = NULL;
+	}
+
+	return (0);
+}
+
+int
+jme_dma_alloc(struct jme_softc *sc)
+{
+	struct jme_txdesc *txd;
+	struct jme_rxdesc *rxd;
+	int error, i, nsegs;
+
+	/*
+	 * Create DMA stuffs for TX ring
+	 */
+
+	error = bus_dmamap_create(sc->sc_dmat, JME_TX_RING_SIZE, 1,
+	    JME_TX_RING_SIZE, 0, BUS_DMA_NOWAIT,
+	    &sc->jme_cdata.jme_tx_ring_map);
+	if (error)
+		return (ENOBUFS);
+
+	/* Allocate DMA'able memory for TX ring */
+	error = bus_dmamem_alloc(sc->sc_dmat, JME_TX_RING_SIZE, ETHER_ALIGN, 0,
+	    &sc->jme_rdata.jme_tx_ring_seg, 1, &nsegs,
+	    BUS_DMA_WAITOK);
+/* XXX zero */
+	if (error) {
+		printf("%s: could not allocate DMA'able memory for Tx ring.\n",
+		    sc->sc_dev.dv_xname);
+		return error;
+	}
+
+	error = bus_dmamem_map(sc->sc_dmat, &sc->jme_rdata.jme_tx_ring_seg,
+	    nsegs, JME_TX_RING_SIZE, (caddr_t *)&sc->jme_rdata.jme_tx_ring,
+	    BUS_DMA_NOWAIT);
+	if (error)
+		return (ENOBUFS);
+
+	/*  Load the DMA map for Tx ring. */
+	error = bus_dmamap_load(sc->sc_dmat,
+	    sc->jme_cdata.jme_tx_ring_map, sc->jme_rdata.jme_tx_ring,
+	    JME_TX_RING_SIZE, NULL, BUS_DMA_NOWAIT);
+	if (error) {
+		printf("%s: could not load DMA'able memory for Tx ring.\n",
+		    sc->sc_dev.dv_xname);
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)&sc->jme_rdata.jme_tx_ring, 1);
+		return error;
+	}
+	sc->jme_rdata.jme_tx_ring_paddr =
+	    sc->jme_cdata.jme_tx_ring_map->dm_segs[0].ds_addr;
+
+	/*
+	 * Create DMA stuffs for RX ring
+	 */
+
+	error = bus_dmamap_create(sc->sc_dmat, JME_RX_RING_SIZE, 1,
+	    JME_RX_RING_SIZE, 0, BUS_DMA_NOWAIT,
+	    &sc->jme_cdata.jme_rx_ring_map);
+	if (error)
+		return (ENOBUFS);
+
+	/* Allocate DMA'able memory for RX ring */
+	error = bus_dmamem_alloc(sc->sc_dmat, JME_RX_RING_SIZE, ETHER_ALIGN, 0,
+	    &sc->jme_rdata.jme_rx_ring_seg, 1, &nsegs,
+	    BUS_DMA_WAITOK);
+/* XXX zero */
+	if (error) {
+		printf("%s: could not allocate DMA'able memory for Rx ring.\n",
+		    sc->sc_dev.dv_xname);
+		return error;
+	}
+
+	error = bus_dmamem_map(sc->sc_dmat, &sc->jme_rdata.jme_rx_ring_seg,
+	    nsegs, JME_RX_RING_SIZE, (caddr_t *)&sc->jme_rdata.jme_rx_ring,
+	    BUS_DMA_NOWAIT);
+	if (error)
+		return (ENOBUFS);
+
+	bzero(sc->jme_rdata.jme_rx_ring, JME_RX_RING_SIZE);
+
+	/* Load the DMA map for Rx ring. */
+	error = bus_dmamap_load(sc->sc_dmat,
+	    sc->jme_cdata.jme_rx_ring_map, sc->jme_rdata.jme_rx_ring,
+	    JME_RX_RING_SIZE, NULL, BUS_DMA_NOWAIT);
+	if (error) {
+		printf("%s: could not load DMA'able memory for Rx ring.\n",
+		    sc->sc_dev.dv_xname);
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)sc->jme_rdata.jme_rx_ring, 1);
+		return error;
+	}
+	sc->jme_rdata.jme_rx_ring_paddr =
+	    sc->jme_cdata.jme_rx_ring_map->dm_segs[0].ds_addr;
+
+#if 0
+	/* Tx/Rx descriptor queue should reside within 4GB boundary. */
+	tx_ring_end = sc->jme_rdata.jme_tx_ring_paddr + JME_TX_RING_SIZE;
+	rx_ring_end = sc->jme_rdata.jme_rx_ring_paddr + JME_RX_RING_SIZE;
+	if ((JME_ADDR_HI(tx_ring_end) !=
+	     JME_ADDR_HI(sc->jme_rdata.jme_tx_ring_paddr)) ||
+	    (JME_ADDR_HI(rx_ring_end) !=
+	     JME_ADDR_HI(sc->jme_rdata.jme_rx_ring_paddr))) {
+		printf("%s: 4GB boundary crossed, switching to 32bit "
+		    "DMA address mode.\n", sc->sc_dev.dv_xname);
+		jme_dma_free(sc);
+		/* Limit DMA address space to 32bit and try again. */
+		lowaddr = BUS_SPACE_MAXADDR_32BIT;
+		goto again;
+	}
+#endif
+
+	/*
+	 * Create DMA stuffs for shadow status block
+	 */
+
+	error = bus_dmamap_create(sc->sc_dmat, JME_SSB_SIZE, 1,
+	    JME_SSB_SIZE, 0, BUS_DMA_NOWAIT, &sc->jme_cdata.jme_ssb_map);
+	if (error)
+		return (ENOBUFS);
+
+	/* Allocate DMA'able memory for shared status block. */
+	error = bus_dmamem_alloc(sc->sc_dmat, JME_SSB_SIZE, 1, 0,
+	    &sc->jme_rdata.jme_ssb_block_seg, 1, &nsegs, BUS_DMA_WAITOK);
+	if (error) {
+		printf("%s: could not allocate DMA'able "
+		    "memory for shared status block.\n", sc->sc_dev.dv_xname);
+		return error;
+	}
+
+	error = bus_dmamem_map(sc->sc_dmat, &sc->jme_rdata.jme_ssb_block_seg,
+	    nsegs, JME_SSB_SIZE, (caddr_t *)&sc->jme_rdata.jme_ssb_block,
+	    BUS_DMA_NOWAIT);
+	if (error)
+		return (ENOBUFS);
+
+	/* Load the DMA map for shared status block */
+	error = bus_dmamap_load(sc->sc_dmat,
+	    sc->jme_cdata.jme_ssb_map, sc->jme_rdata.jme_ssb_block,
+	    JME_SSB_SIZE, NULL, BUS_DMA_NOWAIT);
+	if (error) {
+		printf("%s: could not load DMA'able memory "
+		    "for shared status block.\n", sc->sc_dev.dv_xname);
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)sc->jme_rdata.jme_ssb_block, 1);
+		return error;
+	}
+	sc->jme_rdata.jme_ssb_block_paddr =
+	    sc->jme_cdata.jme_ssb_map->dm_segs[0].ds_addr;
+
+	/*
+	 * Create DMA stuffs for TX buffers
+	 */
+
+	/* Create DMA maps for Tx buffers. */
+	for (i = 0; i < JME_TX_RING_CNT; i++) {
+		txd = &sc->jme_cdata.jme_txdesc[i];
+		error = bus_dmamap_create(sc->sc_dmat, JME_TSO_MAXSIZE,
+		    JME_MAXTXSEGS, JME_TSO_MAXSEGSIZE, 0, BUS_DMA_NOWAIT,
+		    &txd->tx_dmamap);
+		if (error) {
+			int j;
+
+			printf("%s: could not create %dth Tx dmamap.\n",
+			    sc->sc_dev.dv_xname, i);
+
+			for (j = 0; j < i; ++j) {
+				txd = &sc->jme_cdata.jme_txdesc[j];
+				bus_dmamap_destroy(sc->sc_dmat, txd->tx_dmamap);
+			}
+			sc->jme_cdata.jme_tx_tag = NULL;
+			return error;
+		}
+
+	}
+
+	/*
+	 * Create DMA stuffs for RX buffers
+	 */
+
+	/* Create DMA maps for Rx buffers. */
+	error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES,
+	    0, BUS_DMA_NOWAIT, &sc->jme_cdata.jme_rx_sparemap);
+	if (error) {
+		printf("%s: could not create spare Rx dmamap.\n",
+		    sc->sc_dev.dv_xname);
+		return error;
+	}
+	for (i = 0; i < JME_RX_RING_CNT; i++) {
+		rxd = &sc->jme_cdata.jme_rxdesc[i];
+		error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES,
+		    0, BUS_DMA_NOWAIT, &rxd->rx_dmamap);
+		if (error) {
+			int j;
+
+			printf("%s: could not create %dth Rx dmamap.\n",
+			    sc->sc_dev.dv_xname, i);
+
+			for (j = 0; j < i; ++j) {
+				rxd = &sc->jme_cdata.jme_rxdesc[j];
+				bus_dmamap_destroy(sc->sc_dmat, rxd->rx_dmamap);
+			}
+			bus_dmamap_destroy(sc->sc_dmat,
+			    sc->jme_cdata.jme_rx_sparemap);
+			sc->jme_cdata.jme_rx_tag = NULL;
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+void
+jme_dma_free(struct jme_softc *sc)
+{
+	struct jme_txdesc *txd;
+	struct jme_rxdesc *rxd;
+	int i;
+
+	/* Tx ring */
+	bus_dmamap_unload(sc->sc_dmat,
+	    sc->jme_cdata.jme_tx_ring_map);
+	bus_dmamem_free(sc->sc_dmat,
+	    (bus_dma_segment_t *)sc->jme_rdata.jme_tx_ring, 1);
+
+	/* Rx ring */
+	bus_dmamap_unload(sc->sc_dmat,
+	    sc->jme_cdata.jme_rx_ring_map);
+	bus_dmamem_free(sc->sc_dmat,
+	    (bus_dma_segment_t *)sc->jme_rdata.jme_rx_ring, 1);
+
+	/* Tx buffers */
+	for (i = 0; i < JME_TX_RING_CNT; i++) {
+		txd = &sc->jme_cdata.jme_txdesc[i];
+		bus_dmamap_destroy(sc->sc_dmat, txd->tx_dmamap);
+	}
+
+	/* Rx buffers */
+	for (i = 0; i < JME_RX_RING_CNT; i++) {
+		rxd = &sc->jme_cdata.jme_rxdesc[i];
+		bus_dmamap_destroy(sc->sc_dmat, rxd->rx_dmamap);
+	}
+	bus_dmamap_destroy(sc->sc_dmat,
+	    sc->jme_cdata.jme_rx_sparemap);
+
+	/* Shadow status block. */
+	bus_dmamap_unload(sc->sc_dmat,
+	    sc->jme_cdata.jme_ssb_map);
+	bus_dmamem_free(sc->sc_dmat,
+	    (bus_dma_segment_t *)sc->jme_rdata.jme_ssb_block, 1);
+}
+
+#ifdef notyet
+/*
+ * Unlike other ethernet controllers, JMC250 requires
+ * explicit resetting link speed to 10/100Mbps as gigabit
+ * link will cunsume more power than 375mA.
+ * Note, we reset the link speed to 10/100Mbps with
+ * auto-negotiation but we don't know whether that operation
+ * would succeed or not as we have no control after powering
+ * off. If the renegotiation fail WOL may not work. Running
+ * at 1Gbps draws more power than 375mA at 3.3V which is
+ * specified in PCI specification and that would result in
+ * complete shutdowning power to ethernet controller.
+ *
+ * TODO
+ *  Save current negotiated media speed/duplex/flow-control
+ *  to softc and restore the same link again after resuming.
+ *  PHY handling such as power down/resetting to 100Mbps
+ *  may be better handled in suspend method in phy driver.
+ */
+void
+jme_setlinkspeed(struct jme_softc *sc)
+{
+	struct mii_data *mii;
+	int aneg, i;
+
+	JME_LOCK_ASSERT(sc);
+
+	mii = &sc->sc_miibus;
+	mii_pollstat(mii);
+	aneg = 0;
+	if ((mii->mii_media_status & IFM_AVALID) != 0) {
+		switch IFM_SUBTYPE(mii->mii_media_active) {
+		case IFM_10_T:
+		case IFM_100_TX:
+			return;
+		case IFM_1000_T:
+			aneg++;
+		default:
+			break;
+		}
+	}
+	jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr, MII_100T2CR, 0);
+	jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr, MII_ANAR,
+	    ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10 | ANAR_CSMA);
+	jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr, MII_BMCR,
+	    BMCR_AUTOEN | BMCR_STARTNEG);
+	DELAY(1000);
+	if (aneg != 0) {
+		/* Poll link state until jme(4) get a 10/100 link. */
+		for (i = 0; i < MII_ANEGTICKS_GIGE; i++) {
+			mii_pollstat(mii);
+			if ((mii->mii_media_status & IFM_AVALID) != 0) {
+				switch (IFM_SUBTYPE(mii->mii_media_active)) {
+				case IFM_10_T:
+				case IFM_100_TX:
+					jme_mac_config(sc);
+					return;
+				default:
+					break;
+				}
+			}
+			JME_UNLOCK(sc);
+			pause("jmelnk", hz);
+			JME_LOCK(sc);
+		}
+		if (i == MII_ANEGTICKS_GIGE)
+			printf("%s: establishing link failed, "
+			    "WOL may not work!\n", sc->sc_dev.dv_xname);
+	}
+	/*
+	 * No link, force MAC to have 100Mbps, full-duplex link.
+	 * This is the last resort and may/may not work.
+	 */
+	mii->mii_media_status = IFM_AVALID | IFM_ACTIVE;
+	mii->mii_media_active = IFM_ETHER | IFM_100_TX | IFM_FDX;
+	jme_mac_config(sc);
+}
+
+void
+jme_setwol(struct jme_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	uint32_t gpr, pmcs;
+	uint16_t pmstat;
+	int pmc;
+
+	if (pci_find_extcap(sc->sc_dev, PCIY_PMG, &pmc) != 0) {
+		/* No PME capability, PHY power down. */
+		jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr,
+		    MII_BMCR, BMCR_PDOWN);
+		return;
+	}
+
+	gpr = CSR_READ_4(sc, JME_GPREG0) & ~GPREG0_PME_ENB;
+	pmcs = CSR_READ_4(sc, JME_PMCS);
+	pmcs &= ~PMCS_WOL_ENB_MASK;
+	if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) {
+		pmcs |= PMCS_MAGIC_FRAME | PMCS_MAGIC_FRAME_ENB;
+		/* Enable PME message. */
+		gpr |= GPREG0_PME_ENB;
+		/* For gigabit controllers, reset link speed to 10/100. */
+		if ((sc->jme_caps & JME_CAP_FASTETH) == 0)
+			jme_setlinkspeed(sc);
+	}
+
+	CSR_WRITE_4(sc, JME_PMCS, pmcs);
+	CSR_WRITE_4(sc, JME_GPREG0, gpr);
+
+	/* Request PME. */
+	pmstat = pci_read_config(sc->sc_dev, pmc + PCIR_POWER_STATUS, 2);
+	pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
+	if ((ifp->if_capenable & IFCAP_WOL) != 0)
+		pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
+	pci_write_config(sc->sc_dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
+	if ((ifp->if_capenable & IFCAP_WOL) == 0) {
+		/* No WOL, PHY power down. */
+		jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr,
+		    MII_BMCR, BMCR_PDOWN);
+	}
+}
+#endif
+
+int
+jme_encap(struct jme_softc *sc, struct mbuf **m_head)
+{
+	struct jme_txdesc *txd;
+	struct jme_desc *desc;
+	struct mbuf *m;
+	int maxsegs;
+	int error, i, prod;
+	uint32_t cflags;
+
+	prod = sc->jme_cdata.jme_tx_prod;
+	txd = &sc->jme_cdata.jme_txdesc[prod];
+
+	maxsegs = (JME_TX_RING_CNT - sc->jme_cdata.jme_tx_cnt) -
+		  (JME_TXD_RSVD + 1);
+	if (maxsegs > JME_MAXTXSEGS)
+		maxsegs = JME_MAXTXSEGS;
+	if (maxsegs < (sc->jme_txd_spare - 1))
+		panic("%s: not enough segments %d\n", sc->sc_dev.dv_xname,
+		    maxsegs);
+
+	error = bus_dmamap_load_mbuf(sc->sc_dmat, txd->tx_dmamap,
+				     *m_head, BUS_DMA_NOWAIT);
+	if (error != 0) {
+		bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+		error = EFBIG;
+	}
+	if (error == EFBIG) {
+		error = 0;
+
+		MGETHDR(m, M_DONTWAIT, MT_DATA);
+		if (m == NULL) {
+			printf("%s: can't defrag TX mbuf\n",
+			    sc->sc_dev.dv_xname);
+			m_freem(*m_head);
+			*m_head = NULL;
+			return (ENOBUFS);
+		}
+
+		M_DUP_PKTHDR(m, *m_head);
+		if ((*m_head)->m_pkthdr.len > MHLEN) {
+			MCLGET(m, M_DONTWAIT);
+			if (!(m->m_flags & M_EXT)) {
+				m_freem(*m_head);
+				m_freem(m);
+				*m_head = NULL;
+				return (ENOBUFS);
+			}
+		}
+		
+		m_copydata(*m_head, 0, (*m_head)->m_pkthdr.len, mtod(m, caddr_t));
+		m_freem(*m_head);
+		m->m_len = m->m_pkthdr.len;
+		*m_head = m;
+
+		error = bus_dmamap_load_mbuf(sc->sc_dmat,
+					     txd->tx_dmamap, *m_head,
+					     BUS_DMA_NOWAIT);
+		if (error != 0) {
+			printf("%s: could not load defragged TX mbuf\n",
+			    sc->sc_dev.dv_xname);
+			if (!error) {
+				bus_dmamap_unload(sc->sc_dmat,
+						  txd->tx_dmamap);
+				error = EFBIG;
+			}
+			m_freem(*m_head);
+			*m_head = NULL;
+			return (error);
+		}
+	} else if (error) {
+		printf("%s: could not load TX mbuf\n", sc->sc_dev.dv_xname);
+		return (error);
+	}
+
+	m = *m_head;
+	cflags = 0;
+
+#if 0
+	/* Configure checksum offload. */
+	if (m->m_pkthdr.csum_flags & CSUM_IP)
+		cflags |= JME_TD_IPCSUM;
+	if (m->m_pkthdr.csum_flags & CSUM_TCP)
+		cflags |= JME_TD_TCPCSUM;
+	if (m->m_pkthdr.csum_flags & CSUM_UDP)
+		cflags |= JME_TD_UDPCSUM;
+
+	/* Configure VLAN. */
+	if (m->m_flags & M_VLANTAG) {
+		cflags |= (m->m_pkthdr.ether_vlantag & JME_TD_VLAN_MASK);
+		cflags |= JME_TD_VLAN_TAG;
+	}
+#endif
+
+	desc = &sc->jme_rdata.jme_tx_ring[prod];
+	desc->flags = htole32(cflags);
+	desc->buflen = 0;
+	desc->addr_hi = htole32(m->m_pkthdr.len);
+	desc->addr_lo = 0;
+	sc->jme_cdata.jme_tx_cnt++;
+	KASSERT(sc->jme_cdata.jme_tx_cnt < JME_TX_RING_CNT - JME_TXD_RSVD);
+	JME_DESC_INC(prod, JME_TX_RING_CNT);
+	for (i = 0; i < txd->tx_dmamap->dm_nsegs; i++) {
+		desc = &sc->jme_rdata.jme_tx_ring[prod];
+		desc->flags = htole32(JME_TD_OWN | JME_TD_64BIT);
+		desc->buflen = htole32(txd->tx_dmamap->dm_segs[i].ds_len);
+		desc->addr_hi =
+		    htole32(JME_ADDR_HI(txd->tx_dmamap->dm_segs[i].ds_addr));
+		desc->addr_lo =
+		    htole32(JME_ADDR_LO(txd->tx_dmamap->dm_segs[i].ds_addr));
+
+		sc->jme_cdata.jme_tx_cnt++;
+		KASSERT(sc->jme_cdata.jme_tx_cnt <=
+			 JME_TX_RING_CNT - JME_TXD_RSVD);
+		JME_DESC_INC(prod, JME_TX_RING_CNT);
+	}
+
+	/* Update producer index. */
+	sc->jme_cdata.jme_tx_prod = prod;
+	/*
+	 * Finally request interrupt and give the first descriptor
+	 * owenership to hardware.
+	 */
+	desc = txd->tx_desc;
+	desc->flags |= htole32(JME_TD_OWN | JME_TD_INTR);
+
+	txd->tx_m = m;
+	txd->tx_ndesc = txd->tx_dmamap->dm_nsegs + 1;
+
+	/* Sync descriptors. */
+	bus_dmamap_sync(sc->sc_dmat, txd->tx_dmamap, 0,
+	    txd->tx_dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE);
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_tx_ring_map, 0,
+	     sc->jme_cdata.jme_tx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+
+	return (0);
+}
+
+void
+jme_start(struct ifnet *ifp)
+{
+	struct jme_softc *sc = ifp->if_softc;
+	struct mbuf *m_head;
+	int enq = 0;
+
+	if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
+		return;
+
+	if (sc->jme_cdata.jme_tx_cnt >= JME_TX_DESC_HIWAT)
+		jme_txeof(sc);
+
+	for (;;) {
+		/*
+		 * Check number of available TX descs, always
+		 * leave JME_TXD_RSVD free TX descs.
+		 */
+		if (sc->jme_cdata.jme_tx_cnt + sc->jme_txd_spare >
+		    JME_TX_RING_CNT - JME_TXD_RSVD) {
+			ifp->if_flags |= IFF_OACTIVE;
+			break;
+		}
+
+		IFQ_DEQUEUE(&ifp->if_snd, m_head);
+		if (m_head == NULL)
+			break;
+
+#if NBPFILTER > 0
+		if (ifp->if_bpf != NULL)
+			bpf_mtap(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
+#endif
+
+		/*
+		 * Pack the data into the transmit ring. If we
+		 * don't have room, set the OACTIVE flag and wait
+		 * for the NIC to drain the ring.
+		 */
+		if (jme_encap(sc, &m_head)) {
+			if (m_head == NULL) {
+				ifp->if_oerrors++;
+				break;
+			}
+//			ifq_prepend(&ifp->if_snd, m_head);
+			ifp->if_flags |= IFF_OACTIVE;
+			break;
+		}
+		enq++;
+
+		/*
+		 * If there's a BPF listener, bounce a copy of this frame
+		 * to him.
+		 */
+#if NBPFILTER > 0
+		if (ifp->if_bpf != NULL)
+			bpf_mtap(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
+#endif
+	}
+
+	if (enq > 0) {
+		/*
+		 * Reading TXCSR takes very long time under heavy load
+		 * so cache TXCSR value and writes the ORed value with
+		 * the kick command to the TXCSR. This saves one register
+		 * access cycle.
+		 */
+		CSR_WRITE_4(sc, JME_TXCSR, sc->jme_txcsr | TXCSR_TX_ENB |
+		    TXCSR_TXQ_N_START(TXCSR_TXQ0));
+		/* Set a timeout in case the chip goes out to lunch. */
+		ifp->if_timer = JME_TX_TIMEOUT;
+	}
+}
+
+void
+jme_watchdog(struct ifnet *ifp)
+{
+	struct jme_softc *sc = ifp->if_softc;
+
+	if ((sc->jme_flags & JME_FLAG_LINK) == 0) {
+		printf("%s: watchdog timeout (missed link)\n",
+		    sc->sc_dev.dv_xname);
+		ifp->if_oerrors++;
+		jme_init(ifp);
+		return;
+	}
+
+	jme_txeof(sc);
+	if (sc->jme_cdata.jme_tx_cnt == 0) {
+		printf("%s: watchdog timeout (missed Tx interrupts) "
+			  "-- recovering\n", sc->sc_dev.dv_xname);
+		if (!IFQ_IS_EMPTY(&ifp->if_snd))
+			jme_start(ifp);
+		return;
+	}
+
+	printf("%s: watchdog timeout\n", sc->sc_dev.dv_xname);
+	ifp->if_oerrors++;
+	jme_init(ifp);
+
+	if (!IFQ_IS_EMPTY(&ifp->if_snd))
+		jme_start(ifp);
+}
+
+int
+jme_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
+{
+	struct jme_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+	struct ifreq *ifr = (struct ifreq *)data;
+	struct ifaddr *ifa = (struct ifaddr *)data;
+	int error = 0, s;
+
+	s = splnet();
+
+	if ((error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data)) > 0) {
+		splx(s);
+		return error;
+	}
+
+	switch (cmd) {
+	case SIOCSIFADDR:
+		ifp->if_flags |= IFF_UP;
+		if (!(ifp->if_flags & IFF_RUNNING))
+			jme_init(ifp);
+#ifdef INET
+		if (ifa->ifa_addr->sa_family == AF_INET)
+			arp_ifinit(&sc->sc_arpcom, ifa);
+#endif
+		break;
+	case SIOCSIFMTU:
+#if 0
+		if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > JME_JUMBO_MTU ||
+		    (!(sc->jme_caps & JME_CAP_JUMBO) &&
+		     ifr->ifr_mtu > JME_MAX_MTU)) {
+			error = EINVAL;
+			break;
+		}
+
+		if (ifp->if_mtu != ifr->ifr_mtu) {
+			/*
+			 * No special configuration is required when interface
+			 * MTU is changed but availability of Tx checksum
+			 * offload should be chcked against new MTU size as
+			 * FIFO size is just 2K.
+			 */
+			if (ifr->ifr_mtu >= JME_TX_FIFO_SIZE) {
+				ifp->if_capenable &= ~IFCAP_TXCSUM;
+				ifp->if_hwassist &= ~JME_CSUM_FEATURES;
+			}
+			ifp->if_mtu = ifr->ifr_mtu;
+			if (ifp->if_flags & IFF_RUNNING)
+				jme_init(ifp);
+		}
+#endif
+		if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ifp->if_hardmtu)
+			error = EINVAL;
+		else if (ifp->if_mtu != ifr->ifr_mtu)
+			ifp->if_mtu = ifr->ifr_mtu;
+		break;
+
+	case SIOCSIFFLAGS:
+		if (ifp->if_flags & IFF_UP) {
+			if (ifp->if_flags & IFF_RUNNING) {
+				if ((ifp->if_flags ^ sc->jme_if_flags) &
+				    (IFF_PROMISC | IFF_ALLMULTI))
+					jme_set_filter(sc);
+			} else {
+				if (!(ifp->if_flags & IFF_RUNNING))
+					jme_init(ifp);
+			}
+		} else {
+			if (ifp->if_flags & IFF_RUNNING)
+				jme_stop(sc);
+		}
+		sc->jme_if_flags = ifp->if_flags;
+		break;
+
+	case SIOCADDMULTI:
+	case SIOCDELMULTI:
+		error = (cmd == SIOCADDMULTI) ?
+		    ether_addmulti(ifr, &sc->sc_arpcom) :
+		    ether_delmulti(ifr, &sc->sc_arpcom);
+
+		if (error == ENETRESET) {
+			if (ifp->if_flags & IFF_RUNNING)
+				jme_set_filter(sc);
+			error = 0;
+		}
+		break;
+
+	case SIOCSIFMEDIA:
+	case SIOCGIFMEDIA:
+		error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
+		break;
+	default:
+		error = ENOTTY;
+		break;
+	}
+
+	splx(s);
+	return (error);
+}
+
+void
+jme_mac_config(struct jme_softc *sc)
+{
+	struct mii_data *mii;
+	uint32_t ghc, rxmac, txmac, txpause;
+	int phyconf = JMPHY_CONF_DEFFIFO;
+
+	mii = &sc->sc_miibus;
+
+	CSR_WRITE_4(sc, JME_GHC, GHC_RESET);
+	DELAY(10);
+	CSR_WRITE_4(sc, JME_GHC, 0);
+	ghc = 0;
+	rxmac = CSR_READ_4(sc, JME_RXMAC);
+	rxmac &= ~RXMAC_FC_ENB;
+	txmac = CSR_READ_4(sc, JME_TXMAC);
+	txmac &= ~(TXMAC_CARRIER_EXT | TXMAC_FRAME_BURST);
+	txpause = CSR_READ_4(sc, JME_TXPFC);
+	txpause &= ~TXPFC_PAUSE_ENB;
+	if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
+		ghc |= GHC_FULL_DUPLEX;
+		rxmac &= ~RXMAC_COLL_DET_ENB;
+		txmac &= ~(TXMAC_COLL_ENB | TXMAC_CARRIER_SENSE |
+		    TXMAC_BACKOFF | TXMAC_CARRIER_EXT |
+		    TXMAC_FRAME_BURST);
+#ifdef notyet
+		if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0)
+			txpause |= TXPFC_PAUSE_ENB;
+		if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0)
+			rxmac |= RXMAC_FC_ENB;
+#endif
+		/* Disable retry transmit timer/retry limit. */
+		CSR_WRITE_4(sc, JME_TXTRHD, CSR_READ_4(sc, JME_TXTRHD) &
+		    ~(TXTRHD_RT_PERIOD_ENB | TXTRHD_RT_LIMIT_ENB));
+	} else {
+		rxmac |= RXMAC_COLL_DET_ENB;
+		txmac |= TXMAC_COLL_ENB | TXMAC_CARRIER_SENSE | TXMAC_BACKOFF;
+		/* Enable retry transmit timer/retry limit. */
+		CSR_WRITE_4(sc, JME_TXTRHD, CSR_READ_4(sc, JME_TXTRHD) |
+		    TXTRHD_RT_PERIOD_ENB | TXTRHD_RT_LIMIT_ENB);
+	}
+
+	/* Reprogram Tx/Rx MACs with resolved speed/duplex. */
+	switch (IFM_SUBTYPE(mii->mii_media_active)) {
+	case IFM_10_T:
+		ghc |= GHC_SPEED_10;
+		break;
+
+	case IFM_100_TX:
+		ghc |= GHC_SPEED_100;
+
+		/*
+		 * Use extended FIFO depth to workaround CRC errors
+		 * emitted by chips before JMC250B
+		 */
+		phyconf = JMPHY_CONF_EXTFIFO;
+		break;
+
+	case IFM_1000_T:
+		if (sc->jme_caps & JME_CAP_FASTETH)
+			break;
+
+		ghc |= GHC_SPEED_1000;
+		if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) == 0)
+			txmac |= TXMAC_CARRIER_EXT | TXMAC_FRAME_BURST;
+		break;
+
+	default:
+		break;
+	}
+	CSR_WRITE_4(sc, JME_GHC, ghc);
+	CSR_WRITE_4(sc, JME_RXMAC, rxmac);
+	CSR_WRITE_4(sc, JME_TXMAC, txmac);
+	CSR_WRITE_4(sc, JME_TXPFC, txpause);
+
+	if (sc->jme_caps & JME_CAP_EXTFIFO) {
+		jme_miibus_writereg(&sc->sc_dev, sc->jme_phyaddr,
+				    JMPHY_CONF, phyconf);
+	}
+}
+
+int
+jme_intr(void *xsc)
+{
+	struct jme_softc *sc = xsc;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	uint32_t status;
+	int claimed = 0;
+
+	status = CSR_READ_4(sc, JME_INTR_REQ_STATUS);
+	if (status == 0 || status == 0xFFFFFFFF)
+		return (0);
+
+	/* Disable interrupts. */
+	CSR_WRITE_4(sc, JME_INTR_MASK_CLR, JME_INTRS);
+
+	status = CSR_READ_4(sc, JME_INTR_STATUS);
+	if ((status & JME_INTRS) == 0 || status == 0xFFFFFFFF)
+		goto back;
+
+	/* Reset PCC counter/timer and Ack interrupts. */
+	status &= ~(INTR_TXQ_COMP | INTR_RXQ_COMP);
+	if (status & (INTR_TXQ_COAL | INTR_TXQ_COAL_TO))
+		status |= INTR_TXQ_COAL | INTR_TXQ_COAL_TO | INTR_TXQ_COMP;
+	if (status & (INTR_RXQ_COAL | INTR_RXQ_COAL_TO))
+		status |= INTR_RXQ_COAL | INTR_RXQ_COAL_TO | INTR_RXQ_COMP;
+	CSR_WRITE_4(sc, JME_INTR_STATUS, status);
+
+	if (ifp->if_flags & IFF_RUNNING) {
+		if (status & (INTR_RXQ_COAL | INTR_RXQ_COAL_TO))
+			jme_rxeof(sc);
+
+		if (status & INTR_RXQ_DESC_EMPTY) {
+			/*
+			 * Notify hardware availability of new Rx buffers.
+			 * Reading RXCSR takes very long time under heavy
+			 * load so cache RXCSR value and writes the ORed
+			 * value with the kick command to the RXCSR. This
+			 * saves one register access cycle.
+			 */
+			CSR_WRITE_4(sc, JME_RXCSR, sc->jme_rxcsr |
+			    RXCSR_RX_ENB | RXCSR_RXQ_START);
+		}
+
+		if (status & (INTR_TXQ_COAL | INTR_TXQ_COAL_TO)) {
+			jme_txeof(sc);
+			if (!IFQ_IS_EMPTY(&ifp->if_snd))
+				jme_start(ifp);
+		}
+	}
+	claimed = 1;
+back:
+	/* Reenable interrupts. */
+	CSR_WRITE_4(sc, JME_INTR_MASK_SET, JME_INTRS);
+
+	return (claimed);
+}
+
+void
+jme_txeof(struct jme_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct jme_txdesc *txd;
+	uint32_t status;
+	int cons, nsegs;
+
+	cons = sc->jme_cdata.jme_tx_cons;
+	if (cons == sc->jme_cdata.jme_tx_prod)
+		return;
+
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_tx_ring_map, 0,
+	    sc->jme_cdata.jme_tx_ring_map->dm_mapsize, BUS_DMASYNC_POSTREAD);
+
+	/*
+	 * Go through our Tx list and free mbufs for those
+	 * frames which have been transmitted.
+	 */
+	while (cons != sc->jme_cdata.jme_tx_prod) {
+		txd = &sc->jme_cdata.jme_txdesc[cons];
+
+		if (txd->tx_m == NULL)
+			panic("%s: freeing NULL mbuf!\n", sc->sc_dev.dv_xname);
+
+		status = letoh32(txd->tx_desc->flags);
+		if ((status & JME_TD_OWN) == JME_TD_OWN)
+			break;
+
+		if (status & (JME_TD_TMOUT | JME_TD_RETRY_EXP)) {
+			ifp->if_oerrors++;
+		} else {
+			ifp->if_opackets++;
+			if (status & JME_TD_COLLISION) {
+				ifp->if_collisions +=
+				    letoh32(txd->tx_desc->buflen) &
+				    JME_TD_BUF_LEN_MASK;
+			}
+		}
+
+		/*
+		 * Only the first descriptor of multi-descriptor
+		 * transmission is updated so driver have to skip entire
+		 * chained buffers for the transmiited frame. In other
+		 * words, JME_TD_OWN bit is valid only at the first
+		 * descriptor of a multi-descriptor transmission.
+		 */
+		for (nsegs = 0; nsegs < txd->tx_ndesc; nsegs++) {
+			sc->jme_rdata.jme_tx_ring[cons].flags = 0;
+			JME_DESC_INC(cons, JME_TX_RING_CNT);
+		}
+
+		/* Reclaim transferred mbufs. */
+		bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+		m_freem(txd->tx_m);
+		txd->tx_m = NULL;
+		sc->jme_cdata.jme_tx_cnt -= txd->tx_ndesc;
+		if (sc->jme_cdata.jme_tx_cnt < 0)
+			panic("%s: Active Tx desc counter was garbled\n",
+			    sc->sc_dev.dv_xname);
+		txd->tx_ndesc = 0;
+	}
+	sc->jme_cdata.jme_tx_cons = cons;
+
+	if (sc->jme_cdata.jme_tx_cnt == 0)
+		ifp->if_timer = 0;
+
+	if (sc->jme_cdata.jme_tx_cnt + sc->jme_txd_spare <=
+	    JME_TX_RING_CNT - JME_TXD_RSVD)
+		ifp->if_flags &= ~IFF_OACTIVE;
+
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_tx_ring_map, 0,
+	    sc->jme_cdata.jme_tx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+}
+
+void
+jme_discard_rxbufs(struct jme_softc *sc, int cons, int count)
+{
+	int i;
+
+	for (i = 0; i < count; ++i) {
+		struct jme_desc *desc = &sc->jme_rdata.jme_rx_ring[cons];
+
+		desc->flags = htole32(JME_RD_OWN | JME_RD_INTR | JME_RD_64BIT);
+		desc->buflen = htole32(MCLBYTES);
+		JME_DESC_INC(cons, JME_RX_RING_CNT);
+	}
+}
+
+/* Receive a frame. */
+void
+jme_rxpkt(struct jme_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct jme_desc *desc;
+	struct jme_rxdesc *rxd;
+	struct mbuf *mp, *m;
+	uint32_t flags, status;
+	int cons, count, nsegs;
+
+	cons = sc->jme_cdata.jme_rx_cons;
+	desc = &sc->jme_rdata.jme_rx_ring[cons];
+	flags = letoh32(desc->flags);
+	status = letoh32(desc->buflen);
+	nsegs = JME_RX_NSEGS(status);
+
+	if (status & JME_RX_ERR_STAT) {
+		ifp->if_ierrors++;
+		jme_discard_rxbufs(sc, cons, nsegs);
+#ifdef JME_SHOW_ERRORS
+		printf("%s : receive error = 0x%b\n",
+		    sc->sc_dev.dv_xname, JME_RX_ERR(status), JME_RX_ERR_BITS);
+#endif
+		sc->jme_cdata.jme_rx_cons += nsegs;
+		sc->jme_cdata.jme_rx_cons %= JME_RX_RING_CNT;
+		return;
+	}
+
+	sc->jme_cdata.jme_rxlen = JME_RX_BYTES(status) - JME_RX_PAD_BYTES;
+	for (count = 0; count < nsegs; count++,
+	     JME_DESC_INC(cons, JME_RX_RING_CNT)) {
+		rxd = &sc->jme_cdata.jme_rxdesc[cons];
+		mp = rxd->rx_m;
+
+		/* Add a new receive buffer to the ring. */
+		if (jme_newbuf(sc, rxd, 0) != 0) {
+			ifp->if_iqdrops++;
+			/* Reuse buffer. */
+			jme_discard_rxbufs(sc, cons, nsegs - count);
+			if (sc->jme_cdata.jme_rxhead != NULL) {
+				m_freem(sc->jme_cdata.jme_rxhead);
+				JME_RXCHAIN_RESET(sc);
+			}
+			break;
+		}
+
+		/*
+		 * Assume we've received a full sized frame.
+		 * Actual size is fixed when we encounter the end of
+		 * multi-segmented frame.
+		 */
+		mp->m_len = MCLBYTES;
+
+		/* Chain received mbufs. */
+		if (sc->jme_cdata.jme_rxhead == NULL) {
+			sc->jme_cdata.jme_rxhead = mp;
+			sc->jme_cdata.jme_rxtail = mp;
+		} else {
+			/*
+			 * Receive processor can receive a maximum frame
+			 * size of 65535 bytes.
+			 */
+			mp->m_flags &= ~M_PKTHDR;
+			sc->jme_cdata.jme_rxtail->m_next = mp;
+			sc->jme_cdata.jme_rxtail = mp;
+		}
+
+		if (count == nsegs - 1) {
+			/* Last desc. for this frame. */
+			m = sc->jme_cdata.jme_rxhead;
+			/* XXX assert PKTHDR? */
+			m->m_flags |= M_PKTHDR;
+			m->m_pkthdr.len = sc->jme_cdata.jme_rxlen;
+			if (nsegs > 1) {
+				/* Set first mbuf size. */
+				m->m_len = MCLBYTES - JME_RX_PAD_BYTES;
+				/* Set last mbuf size. */
+				mp->m_len = sc->jme_cdata.jme_rxlen -
+				    ((MCLBYTES - JME_RX_PAD_BYTES) +
+				    (MCLBYTES * (nsegs - 2)));
+			} else {
+				m->m_len = sc->jme_cdata.jme_rxlen;
+			}
+			m->m_pkthdr.rcvif = ifp;
+
+			/*
+			 * Account for 10bytes auto padding which is used
+			 * to align IP header on 32bit boundary. Also note,
+			 * CRC bytes is automatically removed by the
+			 * hardware.
+			 */
+			m->m_data += JME_RX_PAD_BYTES;
+
+#if 0
+			/* Set checksum information. */
+			if ((ifp->if_capenable & IFCAP_RXCSUM) &&
+			    (flags & JME_RD_IPV4)) {
+				m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
+				if (flags & JME_RD_IPCSUM)
+					m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
+				if ((flags & JME_RD_MORE_FRAG) == 0 &&
+				    ((flags & (JME_RD_TCP | JME_RD_TCPCSUM)) ==
+				     (JME_RD_TCP | JME_RD_TCPCSUM) ||
+				     (flags & (JME_RD_UDP | JME_RD_UDPCSUM)) ==
+				     (JME_RD_UDP | JME_RD_UDPCSUM))) {
+					m->m_pkthdr.csum_flags |=
+					    CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
+					m->m_pkthdr.csum_data = 0xffff;
+				}
+			}
+
+			/* Check for VLAN tagged packets. */
+			if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) &&
+			    (flags & JME_RD_VLAN_TAG)) {
+				m->m_pkthdr.ether_vlantag =
+				    flags & JME_RD_VLAN_MASK;
+				m->m_flags |= M_VLANTAG;
+			}
+#endif
+
+#if NBPFILTER > 0
+			if (ifp->if_bpf)
+				bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_IN);
+#endif
+
+			ifp->if_ipackets++;
+			/* Pass it on. */
+			ether_input_mbuf(ifp, m);
+
+			/* Reset mbuf chains. */
+			JME_RXCHAIN_RESET(sc);
+		}
+	}
+
+	sc->jme_cdata.jme_rx_cons += nsegs;
+	sc->jme_cdata.jme_rx_cons %= JME_RX_RING_CNT;
+}
+
+void
+jme_rxeof(struct jme_softc *sc)
+{
+	struct jme_desc *desc;
+	int nsegs, prog, pktlen;
+
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_rx_ring_map, 0,
+	    sc->jme_cdata.jme_rx_ring_map->dm_mapsize, BUS_DMASYNC_POSTREAD);
+
+	prog = 0;
+	for (;;) {
+		desc = &sc->jme_rdata.jme_rx_ring[sc->jme_cdata.jme_rx_cons];
+		if ((letoh32(desc->flags) & JME_RD_OWN) == JME_RD_OWN)
+			break;
+		if ((letoh32(desc->buflen) & JME_RD_VALID) == 0)
+			break;
+
+		/*
+		 * Check number of segments against received bytes.
+		 * Non-matching value would indicate that hardware
+		 * is still trying to update Rx descriptors. I'm not
+		 * sure whether this check is needed.
+		 */
+		nsegs = JME_RX_NSEGS(letoh32(desc->buflen));
+		pktlen = JME_RX_BYTES(letoh32(desc->buflen));
+		if (nsegs != howmany(pktlen, MCLBYTES)) {
+			printf("%s: RX fragment count(%d) "
+			    "and packet size(%d) mismach\n",
+			     sc->sc_dev.dv_xname, nsegs, pktlen);
+			break;
+		}
+
+		/* Received a frame. */
+		jme_rxpkt(sc);
+		prog++;
+	}
+
+	if (prog > 0) {
+		bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_rx_ring_map, 0,
+		    sc->jme_cdata.jme_rx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+	}
+}
+
+void
+jme_tick(void *xsc)
+{
+	struct jme_softc *sc = xsc;
+	struct mii_data *mii = &sc->sc_miibus;
+	int s;
+
+	s = splnet();
+	mii_tick(mii);
+	timeout_add_sec(&sc->jme_tick_ch, 1);
+	splx(s);
+}
+
+void
+jme_reset(struct jme_softc *sc)
+{
+#ifdef foo
+	/* Stop receiver, transmitter. */
+	jme_stop_rx(sc);
+	jme_stop_tx(sc);
+#endif
+	CSR_WRITE_4(sc, JME_GHC, GHC_RESET);
+	DELAY(10);
+	CSR_WRITE_4(sc, JME_GHC, 0);
+}
+
+int
+jme_init(struct ifnet *ifp)
+{
+	struct jme_softc *sc = ifp->if_softc;
+	struct mii_data *mii;
+	uint8_t eaddr[ETHER_ADDR_LEN];
+	bus_addr_t paddr;
+	uint32_t reg;
+	int error;
+
+	/*
+	 * Cancel any pending I/O.
+	 */
+	jme_stop(sc);
+
+	/*
+	 * Reset the chip to a known state.
+	 */
+	jme_reset(sc);
+
+	/*
+	 * Since we always use 64bit address mode for transmitting,
+	 * each Tx request requires one more dummy descriptor.
+	 */
+	sc->jme_txd_spare =
+	howmany(ifp->if_mtu + sizeof(struct ether_vlan_header), MCLBYTES) + 1;
+	KASSERT(sc->jme_txd_spare >= 2);
+
+	/* Init descriptors. */
+	error = jme_init_rx_ring(sc);
+        if (error != 0) {
+                printf("%s: initialization failed: no memory for Rx buffers.\n",
+		    sc->sc_dev.dv_xname);
+                jme_stop(sc);
+		return (1);
+        }
+	jme_init_tx_ring(sc);
+
+	/* Initialize shadow status block. */
+	jme_init_ssb(sc);
+
+	/* Reprogram the station address. */
+	bcopy(LLADDR(ifp->if_sadl), eaddr, ETHER_ADDR_LEN);
+	CSR_WRITE_4(sc, JME_PAR0,
+	    eaddr[3] << 24 | eaddr[2] << 16 | eaddr[1] << 8 | eaddr[0]);
+	CSR_WRITE_4(sc, JME_PAR1, eaddr[5] << 8 | eaddr[4]);
+
+	/*
+	 * Configure Tx queue.
+	 *  Tx priority queue weight value : 0
+	 *  Tx FIFO threshold for processing next packet : 16QW
+	 *  Maximum Tx DMA length : 512
+	 *  Allow Tx DMA burst.
+	 */
+	sc->jme_txcsr = TXCSR_TXQ_N_SEL(TXCSR_TXQ0);
+	sc->jme_txcsr |= TXCSR_TXQ_WEIGHT(TXCSR_TXQ_WEIGHT_MIN);
+	sc->jme_txcsr |= TXCSR_FIFO_THRESH_16QW;
+	sc->jme_txcsr |= sc->jme_tx_dma_size;
+	sc->jme_txcsr |= TXCSR_DMA_BURST;
+	CSR_WRITE_4(sc, JME_TXCSR, sc->jme_txcsr);
+
+	/* Set Tx descriptor counter. */
+	CSR_WRITE_4(sc, JME_TXQDC, JME_TX_RING_CNT);
+
+	/* Set Tx ring address to the hardware. */
+	paddr = JME_TX_RING_ADDR(sc, 0);
+	CSR_WRITE_4(sc, JME_TXDBA_HI, JME_ADDR_HI(paddr));
+	CSR_WRITE_4(sc, JME_TXDBA_LO, JME_ADDR_LO(paddr));
+
+	/* Configure TxMAC parameters. */
+	reg = TXMAC_IFG1_DEFAULT | TXMAC_IFG2_DEFAULT | TXMAC_IFG_ENB;
+	reg |= TXMAC_THRESH_1_PKT;
+	reg |= TXMAC_CRC_ENB | TXMAC_PAD_ENB;
+	CSR_WRITE_4(sc, JME_TXMAC, reg);
+
+	/*
+	 * Configure Rx queue.
+	 *  FIFO full threshold for transmitting Tx pause packet : 128T
+	 *  FIFO threshold for processing next packet : 128QW
+	 *  Rx queue 0 select
+	 *  Max Rx DMA length : 128
+	 *  Rx descriptor retry : 32
+	 *  Rx descriptor retry time gap : 256ns
+	 *  Don't receive runt/bad frame.
+	 */
+	sc->jme_rxcsr = RXCSR_FIFO_FTHRESH_128T;
+	/*
+	 * Since Rx FIFO size is 4K bytes, receiving frames larger
+	 * than 4K bytes will suffer from Rx FIFO overruns. So
+	 * decrease FIFO threshold to reduce the FIFO overruns for
+	 * frames larger than 4000 bytes.
+	 * For best performance of standard MTU sized frames use
+	 * maximum allowable FIFO threshold, 128QW.
+	 */
+	if ((ifp->if_mtu + ETHER_HDR_LEN + EVL_ENCAPLEN + ETHER_CRC_LEN) >
+	    JME_RX_FIFO_SIZE)
+		sc->jme_rxcsr |= RXCSR_FIFO_THRESH_16QW;
+	else
+		sc->jme_rxcsr |= RXCSR_FIFO_THRESH_128QW;
+	sc->jme_rxcsr |= sc->jme_rx_dma_size | RXCSR_RXQ_N_SEL(RXCSR_RXQ0);
+	sc->jme_rxcsr |= RXCSR_DESC_RT_CNT(RXCSR_DESC_RT_CNT_DEFAULT);
+	sc->jme_rxcsr |= RXCSR_DESC_RT_GAP_256 & RXCSR_DESC_RT_GAP_MASK;
+	/* XXX TODO DROP_BAD */
+	CSR_WRITE_4(sc, JME_RXCSR, sc->jme_rxcsr);
+
+	/* Set Rx descriptor counter. */
+	CSR_WRITE_4(sc, JME_RXQDC, JME_RX_RING_CNT);
+
+	/* Set Rx ring address to the hardware. */
+	paddr = JME_RX_RING_ADDR(sc, 0);
+	CSR_WRITE_4(sc, JME_RXDBA_HI, JME_ADDR_HI(paddr));
+	CSR_WRITE_4(sc, JME_RXDBA_LO, JME_ADDR_LO(paddr));
+
+	/* Clear receive filter. */
+	CSR_WRITE_4(sc, JME_RXMAC, 0);
+
+	/* Set up the receive filter. */
+	jme_set_filter(sc);
+	jme_set_vlan(sc);
+
+	/*
+	 * Disable all WOL bits as WOL can interfere normal Rx
+	 * operation. Also clear WOL detection status bits.
+	 */
+	reg = CSR_READ_4(sc, JME_PMCS);
+	reg &= ~PMCS_WOL_ENB_MASK;
+	CSR_WRITE_4(sc, JME_PMCS, reg);
+
+	/*
+	 * Pad 10bytes right before received frame. This will greatly
+	 * help Rx performance on strict-alignment architectures as
+	 * it does not need to copy the frame to align the payload.
+	 */
+	reg = CSR_READ_4(sc, JME_RXMAC);
+	reg |= RXMAC_PAD_10BYTES;
+
+#if 0
+	if (ifp->if_capenable & IFCAP_RXCSUM)
+		reg |= RXMAC_CSUM_ENB;
+#endif
+	CSR_WRITE_4(sc, JME_RXMAC, reg);
+
+	/* Configure general purpose reg0 */
+	reg = CSR_READ_4(sc, JME_GPREG0);
+	reg &= ~GPREG0_PCC_UNIT_MASK;
+	/* Set PCC timer resolution to micro-seconds unit. */
+	reg |= GPREG0_PCC_UNIT_US;
+	/*
+	 * Disable all shadow register posting as we have to read
+	 * JME_INTR_STATUS register in jme_intr. Also it seems
+	 * that it's hard to synchronize interrupt status between
+	 * hardware and software with shadow posting due to
+	 * requirements of bus_dmamap_sync(9).
+	 */
+	reg |= GPREG0_SH_POST_DW7_DIS | GPREG0_SH_POST_DW6_DIS |
+	    GPREG0_SH_POST_DW5_DIS | GPREG0_SH_POST_DW4_DIS |
+	    GPREG0_SH_POST_DW3_DIS | GPREG0_SH_POST_DW2_DIS |
+	    GPREG0_SH_POST_DW1_DIS | GPREG0_SH_POST_DW0_DIS;
+	/* Disable posting of DW0. */
+	reg &= ~GPREG0_POST_DW0_ENB;
+	/* Clear PME message. */
+	reg &= ~GPREG0_PME_ENB;
+	/* Set PHY address. */
+	reg &= ~GPREG0_PHY_ADDR_MASK;
+	reg |= sc->jme_phyaddr;
+	CSR_WRITE_4(sc, JME_GPREG0, reg);
+
+	/* Configure Tx queue 0 packet completion coalescing. */
+	sc->jme_tx_coal_to = PCCTX_COAL_TO_DEFAULT;
+	reg = (sc->jme_tx_coal_to << PCCTX_COAL_TO_SHIFT) &
+	    PCCTX_COAL_TO_MASK;
+	sc->jme_tx_coal_pkt = PCCTX_COAL_PKT_DEFAULT;
+	reg |= (sc->jme_tx_coal_pkt << PCCTX_COAL_PKT_SHIFT) &
+	    PCCTX_COAL_PKT_MASK;
+	reg |= PCCTX_COAL_TXQ0;
+	CSR_WRITE_4(sc, JME_PCCTX, reg);
+
+	/* Configure Rx queue 0 packet completion coalescing. */
+	sc->jme_rx_coal_to = PCCRX_COAL_TO_DEFAULT;
+	reg = (sc->jme_rx_coal_to << PCCRX_COAL_TO_SHIFT) &
+	    PCCRX_COAL_TO_MASK;
+	sc->jme_rx_coal_pkt = PCCRX_COAL_PKT_DEFAULT;
+	reg |= (sc->jme_rx_coal_pkt << PCCRX_COAL_PKT_SHIFT) &
+	    PCCRX_COAL_PKT_MASK;
+	CSR_WRITE_4(sc, JME_PCCRX0, reg);
+
+	/* Configure shadow status block but don't enable posting. */
+	paddr = sc->jme_rdata.jme_ssb_block_paddr;
+	CSR_WRITE_4(sc, JME_SHBASE_ADDR_HI, JME_ADDR_HI(paddr));
+	CSR_WRITE_4(sc, JME_SHBASE_ADDR_LO, JME_ADDR_LO(paddr));
+
+	/* Disable Timer 1 and Timer 2. */
+	CSR_WRITE_4(sc, JME_TIMER1, 0);
+	CSR_WRITE_4(sc, JME_TIMER2, 0);
+
+	/* Configure retry transmit period, retry limit value. */
+	CSR_WRITE_4(sc, JME_TXTRHD,
+	    ((TXTRHD_RT_PERIOD_DEFAULT << TXTRHD_RT_PERIOD_SHIFT) &
+	    TXTRHD_RT_PERIOD_MASK) |
+	    ((TXTRHD_RT_LIMIT_DEFAULT << TXTRHD_RT_LIMIT_SHIFT) &
+	    TXTRHD_RT_LIMIT_SHIFT));
+
+	/* Disable RSS. */
+	CSR_WRITE_4(sc, JME_RSSC, RSSC_DIS_RSS);
+
+	/* Initialize the interrupt mask. */
+	CSR_WRITE_4(sc, JME_INTR_MASK_SET, JME_INTRS);
+	CSR_WRITE_4(sc, JME_INTR_STATUS, 0xFFFFFFFF);
+
+	/*
+	 * Enabling Tx/Rx DMA engines and Rx queue processing is
+	 * done after detection of valid link in jme_miibus_statchg.
+	 */
+	sc->jme_flags &= ~JME_FLAG_LINK;
+
+	/* Set the current media. */
+	mii = &sc->sc_miibus;
+	mii_mediachg(mii);
+
+	timeout_add_sec(&sc->jme_tick_ch, 1);
+
+	ifp->if_flags |= IFF_RUNNING;
+	ifp->if_flags &= ~IFF_OACTIVE;
+
+	return (0);
+}
+
+void
+jme_stop(struct jme_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct jme_txdesc *txd;
+	struct jme_rxdesc *rxd;
+	int i;
+
+	/*
+	 * Mark the interface down and cancel the watchdog timer.
+	 */
+	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
+	ifp->if_timer = 0;
+
+	timeout_del(&sc->jme_tick_ch);
+	sc->jme_flags &= ~JME_FLAG_LINK;
+
+	/*
+	 * Disable interrupts.
+	 */
+	CSR_WRITE_4(sc, JME_INTR_MASK_CLR, JME_INTRS);
+	CSR_WRITE_4(sc, JME_INTR_STATUS, 0xFFFFFFFF);
+
+	/* Disable updating shadow status block. */
+	CSR_WRITE_4(sc, JME_SHBASE_ADDR_LO,
+	    CSR_READ_4(sc, JME_SHBASE_ADDR_LO) & ~SHBASE_POST_ENB);
+
+	/* Stop receiver, transmitter. */
+	jme_stop_rx(sc);
+	jme_stop_tx(sc);
+
+#ifdef foo
+	 /* Reclaim Rx/Tx buffers that have been completed. */
+	jme_rxeof(sc);
+	if (sc->jme_cdata.jme_rxhead != NULL)
+		m_freem(sc->jme_cdata.jme_rxhead);
+	JME_RXCHAIN_RESET(sc);
+	jme_txeof(sc);
+#endif
+
+	/*
+	 * Free partial finished RX segments
+	 */
+	if (sc->jme_cdata.jme_rxhead != NULL)
+		m_freem(sc->jme_cdata.jme_rxhead);
+	JME_RXCHAIN_RESET(sc);
+
+	/*
+	 * Free RX and TX mbufs still in the queues.
+	 */
+	for (i = 0; i < JME_RX_RING_CNT; i++) {
+		rxd = &sc->jme_cdata.jme_rxdesc[i];
+		if (rxd->rx_m != NULL) {
+			bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
+			m_freem(rxd->rx_m);
+			rxd->rx_m = NULL;
+		}
+        }
+	for (i = 0; i < JME_TX_RING_CNT; i++) {
+		txd = &sc->jme_cdata.jme_txdesc[i];
+		if (txd->tx_m != NULL) {
+			bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+			m_freem(txd->tx_m);
+			txd->tx_m = NULL;
+			txd->tx_ndesc = 0;
+		}
+        }
+}
+
+void
+jme_stop_tx(struct jme_softc *sc)
+{
+	uint32_t reg;
+	int i;
+
+	reg = CSR_READ_4(sc, JME_TXCSR);
+	if ((reg & TXCSR_TX_ENB) == 0)
+		return;
+	reg &= ~TXCSR_TX_ENB;
+	CSR_WRITE_4(sc, JME_TXCSR, reg);
+	for (i = JME_TIMEOUT; i > 0; i--) {
+		DELAY(1);
+		if ((CSR_READ_4(sc, JME_TXCSR) & TXCSR_TX_ENB) == 0)
+			break;
+	}
+	if (i == 0)
+		printf("%s: stopping transmitter timeout!\n",
+		    sc->sc_dev.dv_xname);
+}
+
+void
+jme_stop_rx(struct jme_softc *sc)
+{
+	uint32_t reg;
+	int i;
+
+	reg = CSR_READ_4(sc, JME_RXCSR);
+	if ((reg & RXCSR_RX_ENB) == 0)
+		return;
+	reg &= ~RXCSR_RX_ENB;
+	CSR_WRITE_4(sc, JME_RXCSR, reg);
+	for (i = JME_TIMEOUT; i > 0; i--) {
+		DELAY(1);
+		if ((CSR_READ_4(sc, JME_RXCSR) & RXCSR_RX_ENB) == 0)
+			break;
+	}
+	if (i == 0)
+		printf("%s: stopping recevier timeout!\n", sc->sc_dev.dv_xname);
+}
+
+void
+jme_init_tx_ring(struct jme_softc *sc)
+{
+	struct jme_ring_data *rd;
+	struct jme_txdesc *txd;
+	int i;
+
+	sc->jme_cdata.jme_tx_prod = 0;
+	sc->jme_cdata.jme_tx_cons = 0;
+	sc->jme_cdata.jme_tx_cnt = 0;
+
+	rd = &sc->jme_rdata;
+	bzero(rd->jme_tx_ring, JME_TX_RING_SIZE);
+	for (i = 0; i < JME_TX_RING_CNT; i++) {
+		txd = &sc->jme_cdata.jme_txdesc[i];
+		txd->tx_m = NULL;
+		txd->tx_desc = &rd->jme_tx_ring[i];
+		txd->tx_ndesc = 0;
+	}
+
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_tx_ring_map, 0,
+	    sc->jme_cdata.jme_tx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+}
+
+void
+jme_init_ssb(struct jme_softc *sc)
+{
+	struct jme_ring_data *rd;
+
+	rd = &sc->jme_rdata;
+	bzero(rd->jme_ssb_block, JME_SSB_SIZE);
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_ssb_map, 0,
+	    sc->jme_cdata.jme_ssb_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+}
+
+int
+jme_init_rx_ring(struct jme_softc *sc)
+{
+	struct jme_ring_data *rd;
+	struct jme_rxdesc *rxd;
+	int i;
+
+	KASSERT(sc->jme_cdata.jme_rxhead == NULL &&
+		 sc->jme_cdata.jme_rxtail == NULL &&
+		 sc->jme_cdata.jme_rxlen == 0);
+	sc->jme_cdata.jme_rx_cons = 0;
+
+	rd = &sc->jme_rdata;
+	bzero(rd->jme_rx_ring, JME_RX_RING_SIZE);
+	for (i = 0; i < JME_RX_RING_CNT; i++) {
+		int error;
+
+		rxd = &sc->jme_cdata.jme_rxdesc[i];
+		rxd->rx_m = NULL;
+		rxd->rx_desc = &rd->jme_rx_ring[i];
+		error = jme_newbuf(sc, rxd, 1);
+		if (error)
+			return (error);
+	}
+
+	bus_dmamap_sync(sc->sc_dmat, sc->jme_cdata.jme_rx_ring_map, 0,
+	    sc->jme_cdata.jme_rx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+
+	return (0);
+}
+
+int
+jme_newbuf(struct jme_softc *sc, struct jme_rxdesc *rxd, int init)
+{
+	struct jme_desc *desc;
+	struct mbuf *m;
+	bus_dmamap_t map;
+	int error;
+
+	MGETHDR(m, init ? M_WAITOK : M_DONTWAIT, MT_DATA);
+	if (m == NULL)
+		return (ENOBUFS);
+	MCLGET(m, init ? M_WAITOK : M_DONTWAIT);
+	if (!(m->m_flags & M_EXT)) {
+		m_freem(m);
+		return (ENOBUFS);
+	}
+
+	/*
+	 * JMC250 has 64bit boundary alignment limitation so jme(4)
+	 * takes advantage of 10 bytes padding feature of hardware
+	 * in order not to copy entire frame to align IP header on
+	 * 32bit boundary.
+	 */
+	m->m_len = m->m_pkthdr.len = MCLBYTES;
+
+	error = bus_dmamap_load_mbuf(sc->sc_dmat,
+				     sc->jme_cdata.jme_rx_sparemap,
+				     m, BUS_DMA_NOWAIT);
+	if (error != 0) {
+		if (!error) {
+			bus_dmamap_unload(sc->sc_dmat, 
+					  sc->jme_cdata.jme_rx_sparemap);
+			error = EFBIG;
+			printf("%s: too many segments?!\n",
+			    sc->sc_dev.dv_xname);
+		}
+		m_freem(m);
+
+		if (init)
+			printf("%s: can't load RX mbuf\n", sc->sc_dev.dv_xname);
+		return (error);
+	}
+
+	if (rxd->rx_m != NULL) {
+		bus_dmamap_sync(sc->sc_dmat, rxd->rx_dmamap, 0,
+		    rxd->rx_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
+		bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
+	}
+	map = rxd->rx_dmamap;
+	rxd->rx_dmamap = sc->jme_cdata.jme_rx_sparemap;
+	sc->jme_cdata.jme_rx_sparemap = map;
+	rxd->rx_m = m;
+
+	desc = rxd->rx_desc;
+	desc->buflen = htole32(rxd->rx_dmamap->dm_segs[0].ds_len);
+	desc->addr_lo =
+	    htole32(JME_ADDR_LO(rxd->rx_dmamap->dm_segs[0].ds_addr));
+	desc->addr_hi =
+	    htole32(JME_ADDR_HI(rxd->rx_dmamap->dm_segs[0].ds_addr));
+	desc->flags = htole32(JME_RD_OWN | JME_RD_INTR | JME_RD_64BIT);
+
+	return (0);
+}
+
+void
+jme_set_vlan(struct jme_softc *sc)
+{
+//	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	uint32_t reg;
+
+	reg = CSR_READ_4(sc, JME_RXMAC);
+	reg &= ~RXMAC_VLAN_ENB;
+#if 0
+	if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
+		reg |= RXMAC_VLAN_ENB;
+#endif
+	CSR_WRITE_4(sc, JME_RXMAC, reg);
+}
+
+void
+jme_set_filter(struct jme_softc *sc)
+{
+	struct arpcom *ac = &sc->sc_arpcom;
+	struct ifnet *ifp = &ac->ac_if;
+	struct ether_multi *enm;
+	struct ether_multistep step;
+	uint32_t crc;
+	uint32_t mchash[2];
+	uint32_t rxcfg;
+
+	rxcfg = CSR_READ_4(sc, JME_RXMAC);
+	rxcfg &= ~(RXMAC_BROADCAST | RXMAC_PROMISC | RXMAC_MULTICAST |
+	    RXMAC_ALLMULTI);
+
+	/*
+	 * Always accept frames destined to our station address.
+	 * Always accept broadcast frames.
+	 */
+	rxcfg |= RXMAC_UNICAST | RXMAC_BROADCAST;
+
+	if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) {
+		if (ifp->if_flags & IFF_PROMISC)
+			rxcfg |= RXMAC_PROMISC;
+		if (ifp->if_flags & IFF_ALLMULTI)
+			rxcfg |= RXMAC_ALLMULTI;
+		CSR_WRITE_4(sc, JME_MAR0, 0xFFFFFFFF);
+		CSR_WRITE_4(sc, JME_MAR1, 0xFFFFFFFF);
+		CSR_WRITE_4(sc, JME_RXMAC, rxcfg);
+		return;
+	}
+
+	/*
+	 * Set up the multicast address filter by passing all multicast
+	 * addresses through a CRC generator, and then using the low-order
+	 * 6 bits as an index into the 64 bit multicast hash table.  The
+	 * high order bits select the register, while the rest of the bits
+	 * select the bit within the register.
+	 */
+	rxcfg |= RXMAC_MULTICAST;
+	bzero(mchash, sizeof(mchash));
+
+	ETHER_FIRST_MULTI(step, ac, enm);
+	while (enm != NULL) {
+		crc = ether_crc32_be(LLADDR((struct sockaddr_dl *)
+		    enm->enm_addrlo), ETHER_ADDR_LEN);
+
+		/* Just want the 6 least significant bits. */
+		crc &= 0x3f;
+
+		/* Set the corresponding bit in the hash table. */
+		mchash[crc >> 5] |= 1 << (crc & 0x1f);
+
+		ETHER_NEXT_MULTI(step, enm);
+	}
+
+	CSR_WRITE_4(sc, JME_MAR0, mchash[0]);
+	CSR_WRITE_4(sc, JME_MAR1, mchash[1]);
+	CSR_WRITE_4(sc, JME_RXMAC, rxcfg);
+}
diff --git a/sys/dev/pci/if_jmereg.h b/sys/dev/pci/if_jmereg.h
new file mode 100644
index 00000000000..1632ea9a1a2
--- /dev/null
+++ b/sys/dev/pci/if_jmereg.h
@@ -0,0 +1,992 @@
+/*	$OpenBSD: if_jmereg.h,v 1.1 2008/09/26 10:35:15 jsg Exp $	*/
+/*-
+ * Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/jme/if_jmereg.h,v 1.1 2008/05/27 01:42:01 yongari Exp $
+ * $DragonFly: src/sys/dev/netif/jme/if_jmereg.h,v 1.3 2008/09/13 02:47:03 sephe Exp $
+ */
+
+#ifndef	_IF_JMEREG_H
+#define	_IF_JMEREG_H
+
+#define JME_REV_JMC250_A1	0x01
+#define JME_REV_JMC250_A2	0x11
+
+/* JMC250 PCI configuration register. */
+#define JME_PCIR_BAR		0x10
+
+#define	JME_PCI_EROM		0x30
+
+#define	JME_PCI_DBG		0x9C
+
+#define	JME_PCI_SPI		0xB0
+
+#define	SPI_ENB			0x00000010
+#define	SPI_SO_STATUS		0x00000008
+#define	SPI_SI_CTRL		0x00000004
+#define	SPI_SCK_CTRL		0x00000002
+#define	SPI_CS_N_CTRL		0x00000001
+
+#define	JME_PCI_PHYCFG0		0xC0
+
+#define	JME_PCI_PHYCFG1		0xC4
+
+#define	JME_PCI_PHYCFG2		0xC8
+
+#define	JME_PCI_PHYCFG3		0xCC
+
+#define	JME_PCI_PIPECTL1	0xD0
+
+#define	JME_PCI_PIPECTL2	0xD4
+
+/* PCIe link error/status. */
+#define	JME_PCI_LES		0xD8
+
+/* propeietary register 0. */
+#define	JME_PCI_PE0		0xE0
+#define	PE0_SPI_EXIST		0x00200000
+#define	PE0_PME_D0		0x00100000
+#define	PE0_PME_D3H		0x00080000
+#define	PE0_PME_SPI_PAD		0x00040000
+#define	PE0_MASK_ASPM		0x00020000
+#define	PE0_EEPROM_RW_DIS	0x00008000
+#define	PE0_PCI_INTA		0x00001000
+#define	PE0_PCI_INTB		0x00002000
+#define	PE0_PCI_INTC		0x00003000
+#define	PE0_PCI_INTD		0x00004000
+#define	PE0_PCI_SVSSID_WR_ENB	0x00000800
+#define	PE0_MSIX_SIZE_8		0x00000700
+#define	PE0_MSIX_SIZE_7		0x00000600
+#define	PE0_MSIX_SIZE_6		0x00000500
+#define	PE0_MSIX_SIZE_5		0x00000400
+#define	PE0_MSIX_SIZE_4		0x00000300
+#define	PE0_MSIX_SIZE_3		0x00000200
+#define	PE0_MSIX_SIZE_2		0x00000100
+#define	PE0_MSIX_SIZE_1		0x00000000
+#define	PE0_MSIX_SIZE_DEF	0x00000700
+#define	PE0_MSIX_CAP_DIS	0x00000080
+#define	PE0_MSI_PVMC_ENB	0x00000040
+#define	PE0_LCAP_EXIT_LAT_MASK	0x00000038
+#define	PE0_LCAP_EXIT_LAT_DEF	0x00000038
+#define	PE0_PM_AUXC_MASK	0x00000007
+#define	PE0_PM_AUXC_DEF		0x00000007
+
+#define	JME_PCI_PE1		0xE4
+
+#define	JME_PCI_PHYTEST		0xF8
+
+#define	JME_PCI_GPR		0xFC
+
+/*
+ * JMC Register Map.
+ * -----------------------------------------------------------------------
+ *   Register               Size           IO space         Memory space
+ * -----------------------------------------------------------------------
+ * Tx/Rx MAC registers    128 bytes     BAR1 + 0x00 ~       BAR0 + 0x00 ~
+ *                                       BAR1 + 0x7F         BAR0 + 0x7F
+ * -----------------------------------------------------------------------
+ * PHY registers          128 bytes     BAR2 + 0x00 ~       BAR0 + 0x400 ~
+ *                                       BAR2 + 0x7F         BAR0 + 0x47F
+ * -----------------------------------------------------------------------
+ * Misc registers         128 bytes     BAR2 + 0x80 ~       BAR0 + 0x800 ~
+ *                                       BAR2 + 0x7F         BAR0 + 0x87F
+ * -----------------------------------------------------------------------
+ * To simplify register access fuctions and to get better performance
+ * this driver doesn't support IO space access. It could be implemented
+ * as a function which selects appropriate BARs to access requested
+ * register.
+ */
+
+/* Tx control and status. */
+#define	JME_TXCSR		0x0000
+#define	TXCSR_QWEIGHT_MASK	0x0F000000
+#define	TXCSR_QWEIGHT_SHIFT	24
+#define	TXCSR_TXQ_SEL_MASK	0x00070000
+#define	TXCSR_TXQ_SEL_SHIFT	16
+#define	TXCSR_TXQ_START		0x00000001
+#define	TXCSR_TXQ_START_SHIFT	8
+#define	TXCSR_FIFO_THRESH_4QW	0x00000000
+#define	TXCSR_FIFO_THRESH_8QW	0x00000040
+#define	TXCSR_FIFO_THRESH_12QW	0x00000080
+#define	TXCSR_FIFO_THRESH_16QW	0x000000C0
+#define	TXCSR_DMA_SIZE_64	0x00000000
+#define	TXCSR_DMA_SIZE_128	0x00000010
+#define	TXCSR_DMA_SIZE_256	0x00000020
+#define	TXCSR_DMA_SIZE_512	0x00000030
+#define	TXCSR_DMA_BURST		0x00000004
+#define	TXCSR_TX_SUSPEND	0x00000002
+#define	TXCSR_TX_ENB		0x00000001
+#define	TXCSR_TXQ0		0
+#define	TXCSR_TXQ1		1
+#define	TXCSR_TXQ2		2
+#define	TXCSR_TXQ3		3
+#define	TXCSR_TXQ4		4
+#define	TXCSR_TXQ5		5
+#define	TXCSR_TXQ6		6
+#define	TXCSR_TXQ7		7
+#define	TXCSR_TXQ_WEIGHT(x)	\
+	(((x) << TXCSR_QWEIGHT_SHIFT) & TXCSR_QWEIGHT_MASK)
+#define	TXCSR_TXQ_WEIGHT_MIN	0
+#define	TXCSR_TXQ_WEIGHT_MAX	15
+#define	TXCSR_TXQ_N_SEL(x)	\
+	(((x) << TXCSR_TXQ_SEL_SHIFT) & TXCSR_TXQ_SEL_MASK)
+#define	TXCSR_TXQ_N_START(x)	\
+	(TXCSR_TXQ_START << (TXCSR_TXQ_START_SHIFT + (x)))
+
+/* Tx queue descriptor base address. 16bytes alignment required. */
+#define	JME_TXDBA_LO		0x0004
+#define	JME_TXDBA_HI		0x0008
+
+/* Tx queue descriptor count. multiple of 16(max = 1024). */
+#define	JME_TXQDC		0x000C
+#define	TXQDC_MASK		0x0000007F0
+
+/* Tx queue next descriptor address. */
+#define	JME_TXNDA		0x0010
+#define	TXNDA_ADDR_MASK		0xFFFFFFF0
+#define	TXNDA_DESC_EMPTY	0x00000008
+#define	TXNDA_DESC_VALID	0x00000004
+#define	TXNDA_DESC_WAIT		0x00000002
+#define	TXNDA_DESC_FETCH	0x00000001
+
+/* Tx MAC control ans status. */
+#define	JME_TXMAC		0x0014
+#define	TXMAC_IFG2_MASK		0xC0000000
+#define	TXMAC_IFG2_DEFAULT	0x40000000
+#define	TXMAC_IFG1_MASK		0x30000000
+#define	TXMAC_IFG1_DEFAULT	0x20000000
+#define	TXMAC_THRESH_1_PKT	0x00000300
+#define	TXMAC_THRESH_1_2_PKT	0x00000200
+#define	TXMAC_THRESH_1_4_PKT	0x00000100
+#define	TXMAC_THRESH_1_8_PKT	0x00000000
+#define	TXMAC_FRAME_BURST	0x00000080
+#define	TXMAC_CARRIER_EXT	0x00000040
+#define	TXMAC_IFG_ENB		0x00000020
+#define	TXMAC_BACKOFF		0x00000010
+#define	TXMAC_CARRIER_SENSE	0x00000008
+#define	TXMAC_COLL_ENB		0x00000004
+#define	TXMAC_CRC_ENB		0x00000002
+#define	TXMAC_PAD_ENB		0x00000001
+
+/* Tx pause frame control. */
+#define	JME_TXPFC		0x0018
+#define	TXPFC_VLAN_TAG_MASK	0xFFFF0000
+#define	TXPFC_VLAN_TAG_SHIFT	16
+#define	TXPFC_VLAN_ENB		0x00008000
+#define	TXPFC_PAUSE_ENB		0x00000001
+
+/* Tx timer/retry at half duplex. */
+#define	JME_TXTRHD		0x001C
+#define	TXTRHD_RT_PERIOD_ENB	0x80000000
+#define	TXTRHD_RT_PERIOD_MASK	0x7FFFFF00
+#define	TXTRHD_RT_PERIOD_SHIFT	8
+#define	TXTRHD_RT_LIMIT_ENB	0x00000080
+#define	TXTRHD_RT_LIMIT_MASK	0x0000007F
+#define	TXTRHD_RT_LIMIT_SHIFT	0
+#define	TXTRHD_RT_PERIOD_DEFAULT	8192
+#define	TXTRHD_RT_LIMIT_DEFAULT	8
+
+/* Rx control & status. */
+#define	JME_RXCSR		0x0020
+#define	RXCSR_FIFO_FTHRESH_16T	0x00000000
+#define	RXCSR_FIFO_FTHRESH_32T	0x10000000
+#define	RXCSR_FIFO_FTHRESH_64T	0x20000000
+#define	RXCSR_FIFO_FTHRESH_128T	0x30000000
+#define	RXCSR_FIFO_FTHRESH_MASK	0x30000000
+#define	RXCSR_FIFO_THRESH_16QW	0x00000000
+#define	RXCSR_FIFO_THRESH_32QW	0x04000000
+#define	RXCSR_FIFO_THRESH_64QW	0x08000000
+#define	RXCSR_FIFO_THRESH_128QW	0x0C000000
+#define	RXCSR_FIFO_THRESH_MASK	0x0C000000
+#define	RXCSR_DMA_SIZE_16	0x00000000
+#define	RXCSR_DMA_SIZE_32	0x01000000
+#define	RXCSR_DMA_SIZE_64	0x02000000
+#define	RXCSR_DMA_SIZE_128	0x03000000
+#define	RXCSR_RXQ_SEL_MASK	0x00030000
+#define	RXCSR_RXQ_SEL_SHIFT	16
+#define	RXCSR_DESC_RT_GAP_MASK	0x0000F000
+#define	RXCSR_DESC_RT_GAP_SHIFT	12
+#define	RXCSR_DESC_RT_GAP_256	0x00000000
+#define	RXCSR_DESC_RT_GAP_512	0x00001000
+#define	RXCSR_DESC_RT_GAP_1024	0x00002000
+#define	RXCSR_DESC_RT_GAP_2048	0x00003000
+#define	RXCSR_DESC_RT_GAP_4096	0x00004000
+#define	RXCSR_DESC_RT_GAP_8192	0x00005000
+#define	RXCSR_DESC_RT_GAP_16384	0x00006000
+#define	RXCSR_DESC_RT_GAP_32768	0x00007000
+#define	RXCSR_DESC_RT_CNT_MASK	0x00000F00
+#define	RXCSR_DESC_RT_CNT_SHIFT	8
+#define	RXCSR_PASS_WAKEUP_PKT	0x00000040
+#define	RXCSR_PASS_MAGIC_PKT	0x00000020
+#define	RXCSR_PASS_RUNT_PKT	0x00000010
+#define	RXCSR_PASS_BAD_PKT	0x00000008
+#define	RXCSR_RXQ_START		0x00000004
+#define	RXCSR_RX_SUSPEND	0x00000002
+#define	RXCSR_RX_ENB		0x00000001
+
+#define	RXCSR_RXQ_N_SEL(x)	((x) << RXCSR_RXQ_SEL_SHIFT)
+#define	RXCSR_RXQ0		0
+#define	RXCSR_RXQ1		1
+#define	RXCSR_RXQ2		2
+#define	RXCSR_RXQ3		3
+#define	RXCSR_DESC_RT_CNT(x)	\
+	((((x) / 4) << RXCSR_DESC_RT_CNT_SHIFT) & RXCSR_DESC_RT_CNT_MASK)
+#define	RXCSR_DESC_RT_CNT_DEFAULT	32
+
+/* Rx queue descriptor base address. 16bytes alignment needed. */
+#define	JME_RXDBA_LO		0x0024
+#define	JME_RXDBA_HI		0x0028
+
+/* Rx queue descriptor count. multiple of 16(max = 1024). */
+#define	JME_RXQDC		0x002C
+#define	RXQDC_MASK		0x0000007F0
+
+/* Rx queue next descriptor address. */
+#define	JME_RXNDA		0x0030
+#define	RXNDA_ADDR_MASK		0xFFFFFFF0
+#define	RXNDA_DESC_EMPTY	0x00000008
+#define	RXNDA_DESC_VALID	0x00000004
+#define	RXNDA_DESC_WAIT		0x00000002
+#define	RXNDA_DESC_FETCH	0x00000001
+
+/* Rx MAC control and status. */
+#define	JME_RXMAC		0x0034
+#define	RXMAC_RSS_UNICAST	0x00000000
+#define	RXMAC_RSS_UNI_MULTICAST	0x00010000
+#define	RXMAC_RSS_UNI_MULTI_BROADCAST	0x00020000
+#define	RXMAC_RSS_ALLFRAME	0x00030000
+#define	RXMAC_PROMISC		0x00000800
+#define	RXMAC_BROADCAST		0x00000400
+#define	RXMAC_MULTICAST		0x00000200
+#define	RXMAC_UNICAST		0x00000100
+#define	RXMAC_ALLMULTI		0x00000080
+#define	RXMAC_MULTICAST_FILTER	0x00000040
+#define	RXMAC_COLL_DET_ENB	0x00000020
+#define	RXMAC_FC_ENB		0x00000008
+#define	RXMAC_VLAN_ENB		0x00000004
+#define	RXMAC_PAD_10BYTES	0x00000002
+#define	RXMAC_CSUM_ENB		0x00000001
+
+/* Rx unicast MAC address. */
+#define	JME_PAR0		0x0038
+#define	JME_PAR1		0x003C
+
+/* Rx multicast address hash table. */
+#define	JME_MAR0		0x0040
+#define	JME_MAR1		0x0044
+
+/* Wakeup frame output data port. */
+#define	JME_WFODP		0x0048
+
+/* Wakeup frame output interface. */
+#define	JME_WFOI		0x004C
+#define	WFOI_MASK_0_31		0x00000000
+#define	WFOI_MASK_31_63		0x00000010
+#define	WFOI_MASK_64_95		0x00000020
+#define	WFOI_MASK_96_127	0x00000030
+#define	WFOI_MASK_SEL		0x00000008
+#define	WFOI_CRC_SEL		0x00000000
+#define	WFOI_WAKEUP_FRAME_MASK	0x00000007
+#define	WFOI_WAKEUP_FRAME_SEL(x)	((x) & WFOI_WAKEUP_FRAME_MASK)
+
+/* Station management interface. */
+#define	JME_SMI			0x0050
+#define	SMI_DATA_MASK		0xFFFF0000
+#define	SMI_DATA_SHIFT		16
+#define	SMI_REG_ADDR_MASK	0x0000F800
+#define	SMI_REG_ADDR_SHIFT	11
+#define	SMI_PHY_ADDR_MASK	0x000007C0
+#define	SMI_PHY_ADDR_SHIFT	6
+#define	SMI_OP_WRITE		0x00000020
+#define	SMI_OP_READ		0x00000000
+#define	SMI_OP_EXECUTE		0x00000010
+#define	SMI_MDIO		0x00000008
+#define	SMI_MDOE		0x00000004
+#define	SMI_MDC			0x00000002
+#define	SMI_MDEN		0x00000001
+#define	SMI_REG_ADDR(x)		\
+	(((x) << SMI_REG_ADDR_SHIFT) & SMI_REG_ADDR_MASK)
+#define	SMI_PHY_ADDR(x)		\
+	(((x) << SMI_PHY_ADDR_SHIFT) & SMI_PHY_ADDR_MASK)
+
+/* Global host control. */
+#define	JME_GHC			0x0054
+#define	GHC_LOOPBACK		0x80000000
+#define	GHC_RESET		0x40000000
+#define	GHC_FULL_DUPLEX		0x00000040
+#define	GHC_SPEED_UNKNOWN	0x00000000
+#define	GHC_SPEED_10		0x00000010
+#define	GHC_SPEED_100		0x00000020
+#define	GHC_SPEED_1000		0x00000030
+#define	GHC_SPEED_MASK		0x00000030
+#define	GHC_LINK_OFF		0x00000004
+#define	GHC_LINK_ON		0x00000002
+#define	GHC_LINK_STAT_POLLING	0x00000001
+
+/* Power management control and status. */
+#define	JME_PMCS		0x0060
+#define	PMCS_WAKEUP_FRAME_7	0x80000000
+#define	PMCS_WAKEUP_FRAME_6	0x40000000
+#define	PMCS_WAKEUP_FRAME_5	0x20000000
+#define	PMCS_WAKEUP_FRAME_4	0x10000000
+#define	PMCS_WAKEUP_FRAME_3	0x08000000
+#define	PMCS_WAKEUP_FRAME_2	0x04000000
+#define	PMCS_WAKEUP_FRAME_1	0x02000000
+#define	PMCS_WAKEUP_FRAME_0	0x01000000
+#define	PMCS_LINK_FAIL		0x00040000
+#define	PMCS_LINK_RISING	0x00020000
+#define	PMCS_MAGIC_FRAME	0x00010000
+#define	PMCS_WAKEUP_FRAME_7_ENB	0x00008000
+#define	PMCS_WAKEUP_FRAME_6_ENB	0x00004000
+#define	PMCS_WAKEUP_FRAME_5_ENB	0x00002000
+#define	PMCS_WAKEUP_FRAME_4_ENB	0x00001000
+#define	PMCS_WAKEUP_FRAME_3_ENB	0x00000800
+#define	PMCS_WAKEUP_FRAME_2_ENB	0x00000400
+#define	PMCS_WAKEUP_FRAME_1_ENB	0x00000200
+#define	PMCS_WAKEUP_FRAME_0_ENB	0x00000100
+#define	PMCS_LINK_FAIL_ENB	0x00000004
+#define	PMCS_LINK_RISING_ENB	0x00000002
+#define	PMCS_MAGIC_FRAME_ENB	0x00000001
+#define	PMCS_WOL_ENB_MASK	0x0000FFFF
+
+/* Giga PHY & EEPROM registers. */
+#define	JME_PHY_EEPROM_BASE_ADDR	0x0400
+
+#define	JME_GIGAR0LO		0x0400
+#define	JME_GIGAR0HI		0x0404
+#define	JME_GIGARALO		0x0408
+#define	JME_GIGARAHI		0x040C
+#define	JME_GIGARBLO		0x0410
+#define	JME_GIGARBHI		0x0414
+#define	JME_GIGARCLO		0x0418
+#define	JME_GIGARCHI		0x041C
+#define	JME_GIGARDLO		0x0420
+#define	JME_GIGARDHI		0x0424
+
+/* BIST status and control. */
+#define	JME_GIGACSR		0x0428
+#define	GIGACSR_STATUS		0x40000000
+#define	GIGACSR_CTRL_MASK	0x30000000
+#define	GIGACSR_CTRL_DEFAULT	0x30000000
+#define	GIGACSR_TX_CLK_MASK	0x0F000000
+#define	GIGACSR_RX_CLK_MASK	0x00F00000
+#define	GIGACSR_TX_CLK_INV	0x00080000
+#define	GIGACSR_RX_CLK_INV	0x00040000
+#define	GIGACSR_PHY_RST		0x00010000
+#define	GIGACSR_IRQ_N_O		0x00001000
+#define	GIGACSR_BIST_OK		0x00000200
+#define	GIGACSR_BIST_DONE	0x00000100
+#define	GIGACSR_BIST_LED_ENB	0x00000010
+#define	GIGACSR_BIST_MASK	0x00000003
+
+/* PHY Link Status. */
+#define	JME_LNKSTS		0x0430
+#define	LINKSTS_SPEED_10	0x00000000
+#define	LINKSTS_SPEED_100	0x00004000
+#define	LINKSTS_SPEED_1000	0x00008000
+#define	LINKSTS_FULL_DUPLEX	0x00002000
+#define	LINKSTS_PAGE_RCVD	0x00001000
+#define	LINKSTS_SPDDPX_RESOLVED	0x00000800
+#define	LINKSTS_UP		0x00000400
+#define	LINKSTS_ANEG_COMP	0x00000200
+#define	LINKSTS_MDI_CROSSOVR	0x00000040
+#define	LINKSTS_LPAR_PAUSE_ASYM	0x00000002
+#define	LINKSTS_LPAR_PAUSE	0x00000001
+
+/* SMB control and status. */
+#define	JME_SMBCSR		0x0440
+#define	SMBCSR_SLAVE_ADDR_MASK	0x7F000000
+#define	SMBCSR_WR_DATA_NACK	0x00040000
+#define	SMBCSR_CMD_NACK		0x00020000
+#define	SMBCSR_RELOAD		0x00010000
+#define	SMBCSR_CMD_ADDR_MASK	0x0000FF00
+#define	SMBCSR_SCL_STAT		0x00000080
+#define	SMBCSR_SDA_STAT		0x00000040
+#define	SMBCSR_EEPROM_PRESENT	0x00000020
+#define	SMBCSR_INIT_LD_DONE	0x00000010
+#define	SMBCSR_HW_BUSY_MASK	0x0000000F
+#define	SMBCSR_HW_IDLE		0x00000000
+
+/* SMB interface. */
+#define	JME_SMBINTF		0x0444
+#define	SMBINTF_RD_DATA_MASK	0xFF000000
+#define	SMBINTF_RD_DATA_SHIFT	24
+#define	SMBINTF_WR_DATA_MASK	0x00FF0000
+#define	SMBINTF_WR_DATA_SHIFT	16
+#define	SMBINTF_ADDR_MASK	0x0000FF00
+#define	SMBINTF_ADDR_SHIFT	8
+#define	SMBINTF_RD		0x00000020
+#define	SMBINTF_WR		0x00000000
+#define	SMBINTF_CMD_TRIGGER	0x00000010
+#define	SMBINTF_BUSY		0x00000010
+#define	SMBINTF_FAST_MODE	0x00000008
+#define	SMBINTF_GPIO_SCL	0x00000004
+#define	SMBINTF_GPIO_SDA	0x00000002
+#define	SMBINTF_GPIO_ENB	0x00000001
+
+#define	JME_EEPROM_SIG0		0x55
+#define	JME_EEPROM_SIG1		0xAA
+#define	JME_EEPROM_DESC_BYTES	3
+#define	JME_EEPROM_DESC_END	0x80
+#define	JME_EEPROM_FUNC_MASK	0x70
+#define	JME_EEPROM_FUNC_SHIFT	4
+#define	JME_EEPROM_PAGE_MASK	0x0F
+#define	JME_EEPROM_PAGE_SHIFT	0
+
+#define	JME_EEPROM_FUNC0	0
+/* PCI configuration space. */
+#define	JME_EEPROM_PAGE_BAR0	0
+/* 128 bytes I/O window. */
+#define	JME_EEPROM_PAGE_BAR1	1
+/* 256 bytes I/O window. */
+#define	JME_EEPROM_PAGE_BAR2	2
+
+#define	JME_EEPROM_END		0xFF
+
+#define	JME_EEPROM_MKDESC(f, p)						\
+	((((f) & JME_EEPROM_FUNC_MASK) << JME_EEPROM_FUNC_SHIFT) |	\
+	(((p) & JME_EEPROM_PAGE_MASK) << JME_EEPROM_PAGE_SHIFT))
+
+/* 3-wire EEPROM interface. Obsolete interface, use SMBCSR. */
+#define	JME_EEPINTF		0x0448
+#define	EEPINTF_DATA_MASK	0xFFFF0000
+#define	EEPINTF_DATA_SHIFT	16
+#define	EEPINTF_ADDR_MASK	0x0000FC00
+#define	EEPINTF_ADDR_SHIFT	10
+#define	EEPRINTF_OP_MASK	0x00000300
+#define	EEPINTF_OP_EXECUTE	0x00000080
+#define	EEPINTF_DATA_OUT	0x00000008
+#define	EEPINTF_DATA_IN		0x00000004
+#define	EEPINTF_CLK		0x00000002
+#define	EEPINTF_SEL		0x00000001
+
+/* 3-wire EEPROM control and status. Obsolete interface, use SMBCSR. */
+#define	JME_EEPCSR		0x044C
+#define	EEPCSR_EEPROM_RELOAD	0x00000002
+#define	EEPCSR_EEPROM_PRESENT	0x00000001
+
+/* Misc registers. */
+#define	JME_MISC_BASE_ADDR	0x800
+
+/* Timer control and status. */
+#define	JME_TMCSR		0x0800
+#define	TMCSR_SW_INTR		0x80000000
+#define	TMCSR_TIMER_INTR	0x10000000
+#define	TMCSR_TIMER_ENB		0x01000000
+#define	TMCSR_TIMER_COUNT_MASK	0x00FFFFFF
+
+/* GPIO control and status. */
+#define	JME_GPIO		0x0804
+#define	GPIO_4_SPI_IN		0x80000000
+#define	GPIO_3_SPI_IN		0x40000000
+#define	GPIO_4_SPI_OUT		0x20000000
+#define	GPIO_4_SPI_OUT_ENB	0x10000000
+#define	GPIO_3_SPI_OUT		0x08000000
+#define	GPIO_3_SPI_OUT_ENB	0x04000000
+#define	GPIO_3_4_LED		0x00000000
+#define	GPIO_3_4_GPIO		0x02000000
+#define	GPIO_2_CLKREQN_IN	0x00100000
+#define	GPIO_2_CLKREQN_OUT	0x00040000
+#define	GPIO_2_CLKREQN_OUT_ENB	0x00020000
+#define	GPIO_1_LED42_IN		0x00001000
+#define	GPIO_1_LED42_OUT	0x00000400
+#define	GPIO_1_LED42_OUT_ENB	0x00000200
+#define	GPIO_1_LED42_ENB	0x00000100
+#define	GPIO_0_SDA_IN		0x00000010
+#define	GPIO_0_SDA_OUT		0x00000004
+#define	GPIO_0_SDA_OUT_ENB	0x00000002
+#define	GPIO_0_SDA_ENB		0x00000001
+
+/* General purpose register 0. */
+#define	JME_GPREG0		0x0808
+#define	GPREG0_SH_POST_DW7_DIS	0x80000000
+#define	GPREG0_SH_POST_DW6_DIS	0x40000000
+#define	GPREG0_SH_POST_DW5_DIS	0x20000000
+#define	GPREG0_SH_POST_DW4_DIS	0x10000000
+#define	GPREG0_SH_POST_DW3_DIS	0x08000000
+#define	GPREG0_SH_POST_DW2_DIS	0x04000000
+#define	GPREG0_SH_POST_DW1_DIS	0x02000000
+#define	GPREG0_SH_POST_DW0_DIS	0x01000000
+#define	GPREG0_DMA_RD_REQ_8	0x00000000
+#define	GPREG0_DMA_RD_REQ_6	0x00100000
+#define	GPREG0_DMA_RD_REQ_5	0x00200000
+#define	GPREG0_DMA_RD_REQ_4	0x00300000
+#define	GPREG0_POST_DW0_ENB	0x00040000
+#define	GPREG0_PCC_CLR_DIS	0x00020000
+#define	GPREG0_FORCE_SCL_OUT	0x00010000
+#define	GPREG0_DL_RSTB_DIS	0x00008000
+#define	GPREG0_STICKY_RESET	0x00004000
+#define	GPREG0_DL_RSTB_CFG_DIS	0x00002000
+#define	GPREG0_LINK_CHG_POLL	0x00001000
+#define	GPREG0_LINK_CHG_DIRECT	0x00000000
+#define	GPREG0_MSI_GEN_SEL	0x00000800
+#define	GPREG0_SMB_PAD_PU_DIS	0x00000400
+#define	GPREG0_PCC_UNIT_16US	0x00000000
+#define	GPREG0_PCC_UNIT_256US	0x00000100
+#define	GPREG0_PCC_UNIT_US	0x00000200
+#define	GPREG0_PCC_UNIT_MS	0x00000300
+#define	GPREG0_PCC_UNIT_MASK	0x00000300
+#define	GPREG0_INTR_EVENT_ENB	0x00000080
+#define	GPREG0_PME_ENB		0x00000020
+#define	GPREG0_PHY_ADDR_MASK	0x0000001F
+#define	GPREG0_PHY_ADDR_SHIFT	0
+#define	GPREG0_PHY_ADDR		1
+
+/* General purpose register 1. reserved for future use. */
+#define	JME_GPREG1		0x080C
+
+/* MSIX entry number of interrupt source. */
+#define	JME_MSINUM_BASE		0x0810
+#define	JME_MSINUM_END		0x081F
+#define	MSINUM_MASK		0x7FFFFFFF
+#define	MSINUM_ENTRY_MASK	7
+#define	MSINUM_REG_INDEX(x)	((x) / 8)
+#define	MSINUM_INTR_SOURCE(x, y)	\
+	(((x) & MSINUM_ENTRY_MASK) << (((y) & 7) * 4))
+#define	MSINUM_NUM_INTR_SOURCE	32
+
+/* Interrupt event status. */
+#define	JME_INTR_STATUS		0x0820
+#define	INTR_SW			0x80000000
+#define	INTR_TIMER		0x40000000
+#define	INTR_LINKCHG		0x20000000
+#define	INTR_PAUSE		0x10000000
+#define	INTR_MAGIC_PKT		0x08000000
+#define	INTR_WAKEUP_PKT		0x04000000
+#define	INTR_RXQ0_COAL_TO	0x02000000
+#define	INTR_RXQ1_COAL_TO	0x01000000
+#define	INTR_RXQ2_COAL_TO	0x00800000
+#define	INTR_RXQ3_COAL_TO	0x00400000
+#define	INTR_TXQ_COAL_TO	0x00200000
+#define	INTR_RXQ0_COAL		0x00100000
+#define	INTR_RXQ1_COAL		0x00080000
+#define	INTR_RXQ2_COAL		0x00040000
+#define	INTR_RXQ3_COAL		0x00020000
+#define	INTR_TXQ_COAL		0x00010000
+#define	INTR_RXQ3_DESC_EMPTY	0x00008000
+#define	INTR_RXQ2_DESC_EMPTY	0x00004000
+#define	INTR_RXQ1_DESC_EMPTY	0x00002000
+#define	INTR_RXQ0_DESC_EMPTY	0x00001000
+#define	INTR_RXQ3_COMP		0x00000800
+#define	INTR_RXQ2_COMP		0x00000400
+#define	INTR_RXQ1_COMP		0x00000200
+#define	INTR_RXQ0_COMP		0x00000100
+#define	INTR_TXQ7_COMP		0x00000080
+#define	INTR_TXQ6_COMP		0x00000040
+#define	INTR_TXQ5_COMP		0x00000020
+#define	INTR_TXQ4_COMP		0x00000010
+#define	INTR_TXQ3_COMP		0x00000008
+#define	INTR_TXQ2_COMP		0x00000004
+#define	INTR_TXQ1_COMP		0x00000002
+#define	INTR_TXQ0_COMP		0x00000001
+
+#define	INTR_RXQ_COAL_TO					\
+	(INTR_RXQ0_COAL_TO | INTR_RXQ1_COAL_TO |		\
+	 INTR_RXQ2_COAL_TO | INTR_RXQ3_COAL_TO)
+
+#define	INTR_RXQ_COAL						\
+	(INTR_RXQ0_COAL | INTR_RXQ1_COAL | INTR_RXQ2_COAL |	\
+	 INTR_RXQ3_COAL)
+
+#define	INTR_RXQ_COMP						\
+	(INTR_RXQ0_COMP | INTR_RXQ1_COMP | INTR_RXQ2_COMP |	\
+	 INTR_RXQ3_COMP)
+
+#define	INTR_RXQ_DESC_EMPTY					\
+	(INTR_RXQ0_DESC_EMPTY | INTR_RXQ1_DESC_EMPTY |		\
+	INTR_RXQ2_DESC_EMPTY | INTR_RXQ3_DESC_EMPTY)
+
+#define	INTR_RXQ_COMP						\
+	(INTR_RXQ0_COMP | INTR_RXQ1_COMP | INTR_RXQ2_COMP |	\
+	INTR_RXQ3_COMP)
+
+#define	INTR_TXQ_COMP						\
+	(INTR_TXQ0_COMP | INTR_TXQ1_COMP | INTR_TXQ2_COMP |	\
+	INTR_TXQ3_COMP | INTR_TXQ4_COMP | INTR_TXQ5_COMP | 	\
+	INTR_TXQ6_COMP | INTR_TXQ7_COMP)
+
+#define	JME_INTRS						\
+	(INTR_RXQ_COAL_TO | INTR_TXQ_COAL_TO | INTR_RXQ_COAL |	\
+	 INTR_TXQ_COAL | INTR_RXQ_DESC_EMPTY)
+
+#define	N_INTR_SW		31
+#define	N_INTR_TIMER		30
+#define	N_INTR_LINKCHG		29
+#define	N_INTR_PAUSE		28
+#define	N_INTR_MAGIC_PKT	27
+#define	N_INTR_WAKEUP_PKT	26
+#define	N_INTR_RXQ0_COAL_TO	25
+#define	N_INTR_RXQ1_COAL_TO	24
+#define	N_INTR_RXQ2_COAL_TO	23
+#define	N_INTR_RXQ3_COAL_TO	22
+#define	N_INTR_TXQ_COAL_TO	21
+#define	N_INTR_RXQ0_COAL	20
+#define	N_INTR_RXQ1_COAL	19
+#define	N_INTR_RXQ2_COAL	18
+#define	N_INTR_RXQ3_COAL	17
+#define	N_INTR_TXQ_COAL		16
+#define	N_INTR_RXQ3_DESC_EMPTY	15
+#define	N_INTR_RXQ2_DESC_EMPTY	14
+#define	N_INTR_RXQ1_DESC_EMPTY	13
+#define	N_INTR_RXQ0_DESC_EMPTY	12
+#define	N_INTR_RXQ3_COMP	11
+#define	N_INTR_RXQ2_COMP	10
+#define	N_INTR_RXQ1_COMP	9
+#define	N_INTR_RXQ0_COMP	8
+#define	N_INTR_TXQ7_COMP	7
+#define	N_INTR_TXQ6_COMP	6
+#define	N_INTR_TXQ5_COMP	5
+#define	N_INTR_TXQ4_COMP	4
+#define	N_INTR_TXQ3_COMP	3
+#define	N_INTR_TXQ2_COMP	2
+#define	N_INTR_TXQ1_COMP	1
+#define	N_INTR_TXQ0_COMP	0
+
+/* Interrupt request status. */
+#define	JME_INTR_REQ_STATUS	0x0824
+
+/* Interrupt enable - setting port. */
+#define	JME_INTR_MASK_SET	0x0828
+
+/* Interrupt enable - clearing port. */
+#define	JME_INTR_MASK_CLR	0x082C
+
+/* Packet completion coalescing control of Rx queue 0, 1, 2 and 3. */
+#define	JME_PCCRX0		0x0830
+#define	JME_PCCRX1		0x0834
+#define	JME_PCCRX2		0x0838
+#define	JME_PCCRX3		0x083C
+#define	PCCRX_COAL_TO_MASK	0xFFFF0000
+#define	PCCRX_COAL_TO_SHIFT	16
+#define	PCCRX_COAL_PKT_MASK	0x0000FF00
+#define	PCCRX_COAL_PKT_SHIFT	8
+
+#define	PCCRX_COAL_TO_MIN	1
+#define	PCCRX_COAL_TO_DEFAULT	100
+#define	PCCRX_COAL_TO_MAX	65535
+
+#define	PCCRX_COAL_PKT_MIN	1
+#define	PCCRX_COAL_PKT_DEFAULT	2
+#define	PCCRX_COAL_PKT_MAX	255
+
+/* Packet completion coalescing control of Tx queue. */
+#define	JME_PCCTX		0x0840
+#define	PCCTX_COAL_TO_MASK	0xFFFF0000
+#define	PCCTX_COAL_TO_SHIFT	16
+#define	PCCTX_COAL_PKT_MASK	0x0000FF00
+#define	PCCTX_COAL_PKT_SHIFT	8
+#define	PCCTX_COAL_TXQ7		0x00000080
+#define	PCCTX_COAL_TXQ6		0x00000040
+#define	PCCTX_COAL_TXQ5		0x00000020
+#define	PCCTX_COAL_TXQ4		0x00000010
+#define	PCCTX_COAL_TXQ3		0x00000008
+#define	PCCTX_COAL_TXQ2		0x00000004
+#define	PCCTX_COAL_TXQ1		0x00000002
+#define	PCCTX_COAL_TXQ0		0x00000001
+
+#define	PCCTX_COAL_TO_MIN	1
+#define	PCCTX_COAL_TO_DEFAULT	100
+#define	PCCTX_COAL_TO_MAX	65535
+
+#define	PCCTX_COAL_PKT_MIN	1
+#define	PCCTX_COAL_PKT_DEFAULT	8
+#define	PCCTX_COAL_PKT_MAX	255
+
+/* Chip mode and FPGA version. */
+#define	JME_CHIPMODE		0x0844
+#define	CHIPMODE_FPGA_REV_MASK	0xFFFF0000
+#define	CHIPMODE_FPGA_REV_SHIFT	16
+#define	CHIPMODE_NOT_FPGA	0
+#define	CHIPMODE_REV_MASK	0x0000FF00
+#define	CHIPMODE_REV_SHIFT	8
+#define	CHIPMODE_MODE_48P	0x0000000C
+#define	CHIPMODE_MODE_64P	0x00000004
+#define	CHIPMODE_MODE_128P_MAC	0x00000003
+#define	CHIPMODE_MODE_128P_DBG	0x00000002
+#define	CHIPMODE_MODE_128P_PHY	0x00000000
+
+/* Shadow status base address high/low. */
+#define	JME_SHBASE_ADDR_HI	0x0848
+#define	JME_SHBASE_ADDR_LO	0x084C
+#define	SHBASE_ADDR_LO_MASK	0xFFFFFFE0
+#define	SHBASE_POST_FORCE	0x00000002
+#define	SHBASE_POST_ENB		0x00000001
+
+/* Timer 1 and 2. */
+#define	JME_TIMER1		0x0870
+#define	JME_TIMER2		0x0874
+#define	TIMER_ENB		0x01000000
+#define	TIMER_CNT_MASK		0x00FFFFFF
+#define	TIMER_CNT_SHIFT		0
+#define	TIMER_UNIT		1024	/* 1024us */
+
+/* Aggresive power mode control. */
+#define	JME_APMC		0x087C
+#define	APMC_PCIE_SDOWN_STAT	0x80000000
+#define	APMC_PCIE_SDOWN_ENB	0x40000000
+#define	APMC_PSEUDO_HOT_PLUG	0x20000000
+#define	APMC_EXT_PLUGIN_ENB	0x04000000
+#define	APMC_EXT_PLUGIN_CTL_MSK	0x03000000
+#define	APMC_DIS_SRAM		0x00000004
+#define	APMC_DIS_CLKPM		0x00000002
+#define	APMC_DIS_CLKTX		0x00000001
+
+/* Packet completion coalesing status of Rx queue 0, 1, 2 and 3. */
+#define	JME_PCCSRX_BASE		0x0880
+#define	JME_PCCSRX_END		0x088F
+#define	PCCSRX_REG(x)		(JME_PCCSRX_BASE + ((x) * 4))
+#define	PCCSRX_TO_MASK		0xFFFF0000
+#define	PCCSRX_TO_SHIFT		16
+#define	PCCSRX_PKT_CNT_MASK	0x0000FF00
+#define	PCCSRX_PKT_CNT_SHIFT	8
+
+/* Packet completion coalesing status of Tx queue. */
+#define	JME_PCCSTX		0x0890
+#define	PCCSTX_TO_MASK		0xFFFF0000
+#define	PCCSTX_TO_SHIFT		16
+#define	PCCSTX_PKT_CNT_MASK	0x0000FF00
+#define	PCCSTX_PKT_CNT_SHIFT	8
+
+/* Tx queues empty indicator. */
+#define	JME_TXQEMPTY		0x0894
+#define	TXQEMPTY_TXQ7		0x00000080
+#define	TXQEMPTY_TXQ6		0x00000040
+#define	TXQEMPTY_TXQ5		0x00000020
+#define	TXQEMPTY_TXQ4		0x00000010
+#define	TXQEMPTY_TXQ3		0x00000008
+#define	TXQEMPTY_TXQ2		0x00000004
+#define	TXQEMPTY_TXQ1		0x00000002
+#define	TXQEMPTY_TXQ0		0x00000001
+#define	TXQEMPTY_N_TXQ(x, y)	((x) & (0x01 << (y)))
+
+/* RSS control registers. */
+#define	JME_RSS_BASE		0x0C00
+
+#define	JME_RSSC		0x0C00
+#define	RSSC_HASH_LEN_MASK	0x0000E000
+#define	RSSC_HASH_64_ENTRY	0x0000A000
+#define	RSSC_HASH_128_ENTRY	0x0000E000
+#define	RSSC_HASH_NONE		0x00001000
+#define	RSSC_HASH_IPV6		0x00000800
+#define	RSSC_HASH_IPV4		0x00000400
+#define	RSSC_HASH_IPV6_TCP	0x00000200
+#define	RSSC_HASH_IPV4_TCP	0x00000100
+#define	RSSC_NCPU_MASK		0x000000F8
+#define	RSSC_NCPU_SHIFT		3
+#define	RSSC_DIS_RSS		0x00000000
+#define	RSSC_2RXQ_ENB		0x00000001
+#define	RSSS_4RXQ_ENB		0x00000002
+
+/* CPU vector. */
+#define	JME_RSSCPU		0x0C04
+#define	RSSCPU_N_SEL(x)		((1 << (x))
+
+/* RSS Hash value. */
+#define	JME_RSSHASH		0x0C10
+
+#define	JME_RSSHASH_STAT	0x0C14
+
+#define	JME_RSS_RDATA0		0x0C18
+
+#define	JME_RSS_RDATA1		0x0C1C
+
+/* RSS secret key. */
+#define	JME_RSSKEY_BASE		0x0C40
+#define	JME_RSSKEY_LAST		0x0C64
+#define	JME_RSSKEY_END		0x0C67
+#define	HASHKEY_NBYTES		40
+#define	RSSKEY_REG(x)		(JME_RSSKEY_LAST - (4 * ((x) / 4)))
+#define	RSSKEY_VALUE(x, y)	((x) << (24 - 8 * ((y) % 4)))
+
+/* RSS indirection table entries. */
+#define	JME_RSSTBL_BASE		0x0C80
+#define	JME_RSSTBL_END		0x0CFF
+#define	RSSTBL_NENTRY		128
+#define	RSSTBL_REG(x)		(JME_RSSTBL_BASE + ((x) / 4))
+#define	RSSTBL_VALUE(x, y)	((x) << (8 * ((y) % 4)))
+
+/* MSI-X table. */
+#define	JME_MSIX_BASE_ADDR	0x2000
+
+#define	JME_MSIX_BASE		0x2000
+#define	JME_MSIX_END		0x207F
+#define	JME_MSIX_NENTRY		8
+#define	MSIX_REG(x)		(JME_MSIX_BASE + ((x) * 0x10))
+#define	MSIX_ADDR_HI_OFF	0x00
+#define	MSIX_ADDR_LO_OFF	0x04
+#define	MSIX_ADDR_LO_MASK	0xFFFFFFFC
+#define	MSIX_DATA_OFF		0x08
+#define	MSIX_VECTOR_OFF		0x0C
+#define	MSIX_VECTOR_RSVD	0x80000000
+#define	MSIX_VECTOR_DIS		0x00000001
+
+/* MSI-X PBA. */
+#define	JME_MSIX_PBA_BASE_ADDR	0x3000
+
+#define	JME_MSIX_PBA		0x3000
+#define	MSIX_PBA_RSVD_MASK	0xFFFFFF00
+#define	MSIX_PBA_RSVD_SHIFT	8
+#define	MSIX_PBA_PEND_MASK	0x000000FF
+#define	MSIX_PBA_PEND_SHIFT	0
+#define	MSIX_PBA_PEND_ENTRY7	0x00000080
+#define	MSIX_PBA_PEND_ENTRY6	0x00000040
+#define	MSIX_PBA_PEND_ENTRY5	0x00000020
+#define	MSIX_PBA_PEND_ENTRY4	0x00000010
+#define	MSIX_PBA_PEND_ENTRY3	0x00000008
+#define	MSIX_PBA_PEND_ENTRY2	0x00000004
+#define	MSIX_PBA_PEND_ENTRY1	0x00000002
+#define	MSIX_PBA_PEND_ENTRY0	0x00000001
+
+#define	JME_PHY_OUI		0x001B8C
+#define	JME_PHY_MODEL		0x21
+#define	JME_PHY_REV		0x01
+#define	JME_PHY_ADDR		1
+
+/* JMC250 shadow status block. */
+struct jme_ssb {
+	uint32_t	dw0;
+	uint32_t	dw1;
+	uint32_t	dw2;
+	uint32_t	dw3;
+	uint32_t	dw4;
+	uint32_t	dw5;
+	uint32_t	dw6;
+	uint32_t	dw7;
+};
+
+/* JMC250 descriptor structures. */
+struct jme_desc {
+	uint32_t	flags;
+	uint32_t	buflen;
+	uint32_t	addr_hi;
+	uint32_t	addr_lo;
+};
+
+#define	JME_TD_OWN		0x80000000
+#define	JME_TD_INTR		0x40000000
+#define	JME_TD_64BIT		0x20000000
+#define	JME_TD_TCPCSUM		0x10000000
+#define	JME_TD_UDPCSUM		0x08000000
+#define	JME_TD_IPCSUM		0x04000000
+#define	JME_TD_TSO		0x02000000
+#define	JME_TD_VLAN_TAG		0x01000000
+#define	JME_TD_VLAN_MASK	0x0000FFFF
+
+#define	JME_TD_MSS_MASK		0xFFFC0000
+#define	JME_TD_MSS_SHIFT	18
+#define	JME_TD_BUF_LEN_MASK	0x0000FFFF
+#define	JME_TD_BUF_LEN_SHIFT	0
+
+#define	JME_TD_FRAME_LEN_MASK	0x0000FFFF
+#define	JME_TD_FRAME_LEN_SHIFT	0
+
+/*
+ * Only the first Tx descriptor of a packet is updated
+ * after packet transmission.
+ */
+#define	JME_TD_TMOUT		0x20000000
+#define	JME_TD_RETRY_EXP	0x10000000
+#define	JME_TD_COLLISION	0x08000000
+#define	JME_TD_UNDERRUN		0x04000000
+#define	JME_TD_EHDR_SIZE_MASK	0x000000FF
+#define	JME_TD_EHDR_SIZE_SHIFT	0
+
+#define	JME_TD_SEG_CNT_MASK	0xFFFF0000
+#define	JME_TD_SEG_CNT_SHIFT	16
+#define	JME_TD_RETRY_CNT_MASK	0x0000FFFF
+#define	JME_TD_RETRY_CNT_SHIFT	0
+
+#define	JME_RD_OWN		0x80000000
+#define	JME_RD_INTR		0x40000000
+#define	JME_RD_64BIT		0x20000000
+
+#define	JME_RD_BUF_LEN_MASK	0x0000FFFF
+#define	JME_RD_BUF_LEN_SHIFT	0
+
+/*
+ * Only the first Rx descriptor of a packet is updated
+ * after packet reception.
+ */
+#define	JME_RD_MORE_FRAG	0x20000000
+#define	JME_RD_TCP		0x10000000
+#define	JME_RD_UDP		0x08000000
+#define	JME_RD_IPCSUM		0x04000000
+#define	JME_RD_TCPCSUM		0x02000000
+#define	JME_RD_UDPCSUM		0x01000000
+#define	JME_RD_VLAN_TAG		0x00800000
+#define	JME_RD_IPV4		0x00400000
+#define	JME_RD_IPV6		0x00200000
+#define	JME_RD_PAUSE		0x00100000
+#define	JME_RD_MAGIC		0x00080000
+#define	JME_RD_WAKEUP		0x00040000
+#define	JME_RD_BCAST		0x00030000
+#define	JME_RD_MCAST		0x00020000
+#define	JME_RD_UCAST		0x00010000
+#define	JME_RD_VLAN_MASK	0x0000FFFF
+#define	JME_RD_VLAN_SHIFT	0
+
+#define	JME_RD_VALID		0x80000000
+#define	JME_RD_CNT_MASK		0x7F000000
+#define	JME_RD_CNT_SHIFT	24
+#define	JME_RD_GIANT		0x00800000
+#define	JME_RD_GMII_ERR		0x00400000
+#define	JME_RD_NBL_RCVD		0x00200000
+#define	JME_RD_COLL		0x00100000
+#define	JME_RD_ABORT		0x00080000
+#define	JME_RD_RUNT		0x00040000
+#define	JME_RD_FIFO_OVRN	0x00020000
+#define	JME_RD_CRC_ERR		0x00010000
+#define	JME_RD_FRAME_LEN_MASK	0x0000FFFF
+
+#define	JME_RX_ERR_STAT						\
+	(JME_RD_GIANT | JME_RD_GMII_ERR | JME_RD_NBL_RCVD |	\
+	JME_RD_COLL | JME_RD_ABORT | JME_RD_RUNT |		\
+	JME_RD_FIFO_OVRN | JME_RD_CRC_ERR)
+
+#define	JME_RD_ERR_MASK		0x00FF0000
+#define	JME_RD_ERR_SHIFT	16
+#define	JME_RX_ERR(x)		(((x) & JME_RD_ERR_MASK) >> JME_RD_ERR_SHIFT)
+#define	JME_RX_ERR_BITS		"\20"					\
+				"\1CRCERR\2FIFOOVRN\3RUNT\4ABORT"	\
+				"\5COLL\6NBLRCVD\7GMIIERR\10"
+
+#define	JME_RX_NSEGS(x)		(((x) & JME_RD_CNT_MASK) >> JME_RD_CNT_SHIFT)
+#define	JME_RX_BYTES(x)		((x) & JME_RD_FRAME_LEN_MASK)
+#define	JME_RX_PAD_BYTES	10
+
+#define	JME_RD_RSS_HASH_VALUE	0xFFFFFFFF
+
+#define	JME_RD_RSS_HASH_MASK	0x00003F00
+#define	JME_RD_RSS_HASH_SHIFT	8
+#define	JME_RD_RSS_HASH_NONE	0x00000000
+#define	JME_RD_RSS_HASH_IPV4	0x00000100
+#define	JME_RD_RSS_HASH_IPV4TCP	0x00000200
+#define	JME_RD_RSS_HASH_IPV6	0x00000400
+#define	JME_RD_RSS_HASH_IPV6TCP	0x00001000
+#define	JME_RD_HASH_FN_NONE	0x00000000
+#define	JME_RD_HASH_FN_TOEPLITZ	0x00000001
+
+#endif
diff --git a/sys/dev/pci/if_jmevar.h b/sys/dev/pci/if_jmevar.h
new file mode 100644
index 00000000000..23d7fce4e49
--- /dev/null
+++ b/sys/dev/pci/if_jmevar.h
@@ -0,0 +1,244 @@
+/*	$OpenBSD: if_jmevar.h,v 1.1 2008/09/26 10:35:15 jsg Exp $	*/
+/*-
+ * Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/jme/if_jmevar.h,v 1.1 2008/05/27 01:42:01 yongari Exp $
+ * $DragonFly: src/sys/dev/netif/jme/if_jmevar.h,v 1.4 2008/09/13 04:04:39 sephe Exp $
+ */
+
+#ifndef	_IF_JMEVAR_H
+#define	_IF_JMEVAR_H
+
+/*
+ * JMC250 supports upto 1024 descriptors and the number of
+ * descriptors should be multiple of 16.
+ */
+#define	JME_TX_RING_CNT		384
+#define	JME_RX_RING_CNT		256
+/*
+ * Tx/Rx descriptor queue base should be 16bytes aligned and
+ * should not cross 4G bytes boundary on the 64bits address
+ * mode.
+ */
+#define	JME_TX_RING_ALIGN	16
+#define	JME_RX_RING_ALIGN	16
+#define	JME_TSO_MAXSEGSIZE	4096
+#define	JME_TSO_MAXSIZE		(65535 + sizeof(struct ether_vlan_header))
+#define	JME_MAXTXSEGS		32
+#define	JME_RX_BUF_ALIGN	sizeof(uint64_t)
+#define	JME_SSB_ALIGN		16
+
+#define	JME_ADDR_LO(x)		((uint64_t) (x) & 0xFFFFFFFF)
+#define	JME_ADDR_HI(x)		((uint64_t) (x) >> 32)
+
+#define	JME_MSI_MESSAGES	8
+#define	JME_MSIX_MESSAGES	8
+
+/* Water mark to kick reclaiming Tx buffers. */
+#define	JME_TX_DESC_HIWAT	(JME_TX_RING_CNT - (((JME_TX_RING_CNT) * 3) / 10))
+
+/*
+ * JMC250 can send 9K jumbo frame on Tx path and can receive
+ * 65535 bytes.
+ */
+#define JME_JUMBO_FRAMELEN	9216
+#define JME_JUMBO_MTU							\
+	(JME_JUMBO_FRAMELEN - sizeof(struct ether_vlan_header) -	\
+	 ETHER_HDR_LEN - ETHER_CRC_LEN)
+#define	JME_MAX_MTU							\
+	(ETHER_MAX_LEN + sizeof(struct ether_vlan_header) -		\
+	 ETHER_HDR_LEN - ETHER_CRC_LEN)
+/*
+ * JMC250 can't handle Tx checksum offload/TSO if frame length
+ * is larger than its FIFO size(2K). It's also good idea to not
+ * use jumbo frame if hardware is running at half-duplex media.
+ * Because the jumbo frame may not fit into the Tx FIFO,
+ * collisions make hardware fetch frame from host memory with
+ * DMA again which in turn slows down Tx performance
+ * significantly.
+ */
+#define	JME_TX_FIFO_SIZE	2000
+/*
+ * JMC250 has just 4K Rx FIFO. To support jumbo frame that is
+ * larger than 4K bytes in length, Rx FIFO threshold should be
+ * adjusted to minimize Rx FIFO overrun.
+ */
+#define	JME_RX_FIFO_SIZE	4000
+
+#define	JME_DESC_INC(x, y)	((x) = ((x) + 1) % (y))
+
+#define	JME_PROC_MIN		10
+#define	JME_PROC_DEFAULT	(JME_RX_RING_CNT / 2)
+#define	JME_PROC_MAX		(JME_RX_RING_CNT - 1)
+
+struct jme_txdesc {
+	struct mbuf		*tx_m;
+	bus_dmamap_t		tx_dmamap;
+	int			tx_ndesc;
+	struct jme_desc		*tx_desc;
+};
+
+struct jme_rxdesc {
+	struct mbuf 		*rx_m;
+	bus_dmamap_t		rx_dmamap;
+	struct jme_desc		*rx_desc;
+};
+
+struct jme_chain_data{
+	bus_dma_tag_t		jme_ring_tag;
+	bus_dma_tag_t		jme_buffer_tag;
+	bus_dma_tag_t		jme_ssb_tag;
+	bus_dmamap_t		jme_ssb_map;
+	bus_dma_tag_t		jme_tx_tag;
+	struct jme_txdesc	jme_txdesc[JME_TX_RING_CNT];
+	bus_dma_tag_t		jme_rx_tag;
+	struct jme_rxdesc	jme_rxdesc[JME_RX_RING_CNT];
+	bus_dmamap_t		jme_tx_ring_map;
+	bus_dma_segment_t	jme_tx_ring_seg;
+	bus_dmamap_t		jme_rx_ring_map;
+	bus_dma_segment_t	jme_rx_ring_seg;
+	bus_dmamap_t		jme_rx_sparemap;
+
+	int			jme_tx_prod;
+	int			jme_tx_cons;
+	int			jme_tx_cnt;
+
+	int			jme_rx_cons;
+	int			jme_rxlen;
+	struct mbuf		*jme_rxhead;
+	struct mbuf		*jme_rxtail;
+};
+
+struct jme_ring_data {
+	struct jme_desc		*jme_tx_ring;
+	bus_dma_segment_t	jme_tx_ring_seg;
+	bus_addr_t		jme_tx_ring_paddr;
+	struct jme_desc		*jme_rx_ring;
+	bus_dma_segment_t	jme_rx_ring_seg;
+	bus_addr_t		jme_rx_ring_paddr;
+	struct jme_ssb		*jme_ssb_block;
+	bus_dma_segment_t	jme_ssb_block_seg;
+	bus_addr_t		jme_ssb_block_paddr;
+};
+
+#define JME_TX_RING_ADDR(sc, i)	\
+    ((sc)->jme_rdata.jme_tx_ring_paddr + sizeof(struct jme_desc) * (i))
+#define JME_RX_RING_ADDR(sc, i)	\
+    ((sc)->jme_rdata.jme_rx_ring_paddr + sizeof(struct jme_desc) * (i))
+
+#define JME_TX_RING_SIZE	\
+    (sizeof(struct jme_desc) * JME_TX_RING_CNT)
+#define JME_RX_RING_SIZE	\
+    (sizeof(struct jme_desc) * JME_RX_RING_CNT)
+#define	JME_SSB_SIZE		sizeof(struct jme_ssb)
+
+struct jme_dmamap_ctx {
+	int			nsegs;
+	bus_dma_segment_t	*segs;
+};
+
+/*
+ * Software state per device.
+ */
+struct jme_softc {
+	struct device		sc_dev;
+	struct arpcom		sc_arpcom;
+
+	int			jme_mem_rid;
+	struct resource		*jme_mem_res;
+	bus_space_tag_t		jme_mem_bt;
+	bus_space_handle_t	jme_mem_bh;
+	bus_size_t		jme_mem_size;
+	bus_dma_tag_t		sc_dmat;
+	pci_chipset_tag_t	jme_pct;
+	pcitag_t		jme_pcitag;
+
+	int			jme_irq_rid;
+	struct resource		*jme_irq_res;
+	void			*sc_irq_handle;
+
+	struct mii_data		sc_miibus;
+	int			jme_phyaddr;
+
+	uint32_t		jme_tx_dma_size;
+	uint32_t		jme_rx_dma_size;
+
+	uint32_t		jme_caps;
+#define	JME_CAP_FPGA		0x0001
+#define	JME_CAP_PCIE		0x0002
+#define	JME_CAP_PMCAP		0x0004
+#define	JME_CAP_FASTETH		0x0008
+#define	JME_CAP_JUMBO		0x0010
+#define JME_CAP_EXTFIFO		0x0020
+
+	uint32_t		jme_flags;
+#define	JME_FLAG_MSI		0x0001
+#define	JME_FLAG_MSIX		0x0002
+#define	JME_FLAG_DETACH		0x0004
+#define	JME_FLAG_LINK		0x0008
+
+	struct timeout		jme_tick_ch;
+	struct jme_chain_data	jme_cdata;
+	struct jme_ring_data	jme_rdata;
+	int			jme_if_flags;
+	uint32_t		jme_txcsr;
+	uint32_t		jme_rxcsr;
+
+	int			jme_txd_spare;
+
+	/*
+	 * Sysctl variables
+	 */
+	int			jme_process_limit;
+	int			jme_tx_coal_to;
+	int			jme_tx_coal_pkt;
+	int			jme_rx_coal_to;
+	int			jme_rx_coal_pkt;
+};
+
+/* Register access macros. */
+#define CSR_WRITE_4(_sc, reg, val)	\
+	bus_space_write_4((_sc)->jme_mem_bt, (_sc)->jme_mem_bh, (reg), (val))
+#define CSR_READ_4(_sc, reg)		\
+	bus_space_read_4((_sc)->jme_mem_bt, (_sc)->jme_mem_bh, (reg))
+
+#define	JME_MAXERR	5
+
+#define	JME_RXCHAIN_RESET(_sc)						\
+do {									\
+	(_sc)->jme_cdata.jme_rxhead = NULL;				\
+	(_sc)->jme_cdata.jme_rxtail = NULL;				\
+	(_sc)->jme_cdata.jme_rxlen = 0;					\
+} while (0)
+
+#define	JME_TX_TIMEOUT		5
+#define JME_TIMEOUT		1000
+#define JME_PHY_TIMEOUT		1000
+#define JME_EEPROM_TIMEOUT	1000
+
+#define JME_TXD_RSVD		1
+
+#endif