diff options
author | Theo de Raadt <deraadt@cvs.openbsd.org> | 1997-10-11 03:53:47 +0000 |
---|---|---|
committer | Theo de Raadt <deraadt@cvs.openbsd.org> | 1997-10-11 03:53:47 +0000 |
commit | 235dc432484a48747b39aa08f905a72e3437503a (patch) | |
tree | 049094a011b64427cf79c77ca99702f610951d9d | |
parent | 8f54a36a6de65c4753af43746e3c40fe506d8e93 (diff) |
some corrections
-rw-r--r-- | distrib/notes/i386/hardware | 24 |
1 files changed, 14 insertions, 10 deletions
diff --git a/distrib/notes/i386/hardware b/distrib/notes/i386/hardware index d8d42df02fa..1220de0788a 100644 --- a/distrib/notes/i386/hardware +++ b/distrib/notes/i386/hardware @@ -24,6 +24,9 @@ Supported devices include: Adaptec AHA-294x[W] cards and some onboard PCI designs using the AIC7870 chip. This driver does *not* currently work with non-PCI AIC-7xxx boards or the Adaptec 3940. + Adaptec AIC-7770-based SCSI host adapters (including the + Adaptec AHA-274x, AHA-284x families). + WD-7000 SCSI host adapters. Buslogic 54x (Adaptec AHA-154x clones; driver on kcadp floppy) BusLogic 445, 74x, 9xx (But not the new "FlashPoint" series of BusLogic SCSI adapters) @@ -33,7 +36,6 @@ Supported devices include: ST01/02 Future Domain TMC-885 Future Domain TMC-950 - MDA, CGA, VGA, SVGA, and HGC Display Adapters. (Note that not all of the display adapters OpenBSD/i386 can work with are supported by X. See the XFree86 FAQ for more @@ -71,6 +73,7 @@ Supported devices include: SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards) [X SEE BELOW] Novell NE1000, NE2000 Digital DEFPA PCI FDDI adapters + Intel EtherExpress 100 Fast Ethernet adapters. Tape drives: Most SCSI tape drives QIC-02 and QIC-36 format (Archive- and Wangtek- @@ -95,7 +98,11 @@ Supported devices include: ProAudio Spectrum [*] [+] Miscellaneous: OPTi(82C929) chipset for multi-interface CD-ROM, and - sound ISA cards. + sound ISA cards. + PCI-PCI bridges and cards which include them, such as + the AHA-394x SCSI host adapter and some + DC21x4x-based multi-Ethernet cards. + APM power management. Drivers for hardware marked with "[*]" are NOT included on the distribution floppies. Except as noted above, all other drivers are @@ -111,18 +118,11 @@ although it is not in the kernel on the installation floppy. Hardware the we do NOT currently support, but get many questions about: - Adaptec AIC-7770-based SCSI host adapters (including the - Adaptec AHA-274x, AHA-284x families). NCR 5380-based SCSI host adapters. - APM power management -- if your system supports it, turn it off! QIC-40 and QIC-80 tape drives. (Those are the tape drives that connect to the floppy disk controller.) - WD-7000 SCSI host adapters. - PCI-PCI bridges and cards which include them, such as the AHA-394x - SCSI host adapter and some DC21x4x-based multi-Ethernet cards. Multiprocessor Pentium and Pentium Pro systems. (Though they should run fine using one processor only.) - Intel EtherExpress 100 Fast Ethernet adapters. We are planning future support for many of these devices. @@ -181,7 +181,7 @@ Novell NE1000, or NE2000 Ethernet boards ed1 0x250 2 iomem 0xd8000 ed2 0x300 10 iomem 0xcc000 [X SEE BELOW] -3COM 3c509, 3c579, 3c595 Ethernet boards (the 3c590 has problems) +3COM 3c509, 3c579, 3c595, 3c900, 3c905 Ethernet boards ep0 any any AT&T StarLAN 10, EN100, or StarLAN Fiber, or 3COM 3c507 Ethernet boards @@ -195,6 +195,10 @@ DC21x4x based Ethernet boards; see above for partial list de0 any any [you must assign an interrupt in your PCI BIOS, or let it do so for you] +Intel EtherExpress 100 Ethernet boards + fxp0 any any [you must assign an interrupt in your + PCI BIOS, or let it do so for you] + SPECIAL CARE FOR SMC ULTRA ELITE -------------------------------- |