Add a note about booting from the sdcard on beaglebone black.

OK florian@

1 files changed, 6 insertions, 1 deletions

diff --git a/distrib/notes/beagle/prep b/distrib/notes/beagle/prep
index 896ed243af8..da01caa5c8b 100644
--- a/distrib/notes/beagle/prep
+++ b/distrib/notes/beagle/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.2 2013/07/16 18:15:10 florian Exp $
+dnl	$OpenBSD: prep,v 1.3 2013/08/07 19:24:54 bmercer Exp $
 Please be aware that OpenBSD support for this platform is far from
 complete.
 
@@ -17,3 +17,8 @@ The command would likely be, under OpenBSD:
 When you have connected the BeagleBoard to you computer, a command such
 as "tip -115200 tty00" (assuming tty00 is your serial port device) should
 connect you to the board's console.
+
+Note: By default the BeagleBone Black will boot from the internal emmc. 
+In order to make it boot from the micro sdcard, you will need to hold down
+the small button located by the sdcard slot while powering on the board. 
+Once you have done this the board will boot from the sdcard as the default.