Updates to OpenBSD/arm64 install notes.

with jsg@

5 files changed, 12 insertions, 96 deletions

diff --git a/distrib/notes/arm64/contents b/distrib/notes/arm64/contents
index 408276846f3..cfa43e00910 100644
--- a/distrib/notes/arm64/contents
+++ b/distrib/notes/arm64/contents
@@ -1,34 +1,6 @@
-dnl	$OpenBSD: contents,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl	$OpenBSD: contents,v 1.2 2017/01/25 03:10:06 patrick Exp $
 TopPart
 
-	miniroot-am335x-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; BeagleBone version.
-
-	miniroot-beagle-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; BeagleBoard version.
-
-	miniroot-cubie-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; Cubieboard2 version.
-
-	miniroot-cubox-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; CuBox-i version.
-
-	miniroot-nitrogen-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; Nitrogen6x version.
-
-	miniroot-panda-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; PandaBoard (ES) version.
-
-	miniroot-wandboard-{:--:}OSrev.fs
-			A miniroot filesystem to be used for
-			installation; Wandboard version.
-
 OpenBSDdistsets
 
 OpenBSDbsd
diff --git a/distrib/notes/arm64/features b/distrib/notes/arm64/features
index 3a463871059..86207425c8d 100644
--- a/distrib/notes/arm64/features
+++ b/distrib/notes/arm64/features
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: features,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl	$OpenBSD: features,v 1.2 2017/01/25 03:10:06 patrick Exp $
 dnl
 dnl This file lists almost all the conditional features of this port,
 dnl which are used to provide accurate installation notes.
@@ -11,7 +11,7 @@ dnl
 dnl ====
 dnl
 dnl architecture name (for the packages directory)
-define({:-MACHINE_ARCH-:},arm)dnl
+define({:-MACHINE_ARCH-:},aarch64)dnl
 dnl
 dnl define if /sbin/kbd exists on the media
 define({:-MDKBD-:},)dnl
diff --git a/distrib/notes/arm64/hardware b/distrib/notes/arm64/hardware
index aa749f6453f..5fef8696aab 100644
--- a/distrib/notes/arm64/hardware
+++ b/distrib/notes/arm64/hardware
@@ -1,41 +1,4 @@
-dnl	$OpenBSD: hardware,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl	$OpenBSD: hardware,v 1.2 2017/01/25 03:10:06 patrick Exp $
 The following machines are targeted by OpenBSD/MACHINE:
-
-    BeagleBoard, BeagleBoard xM
-	Supported on-board devices:
-	  standard serial port (com)
-	  watchdog controller (omdog)
-	  GPIO controller (omgpio)
-
-    BeagleBone, BeagleBone Black
-	Supported on-board devices:
-	  standard serial port (com)
-	  watchdog controller (omdog)
-	  Ethernet controller (cpsw)
-	  GPIO controller (omgpio)
-
-    PandaBoard (ES)
-	Supported on-board devices:
-	  standard serial port (com)
-	  USB controller (ehci)
-	  watchdog controller (omdog)
-	  GPIO controller (omgpio)
-
-    Cubieboard, pcDuino
-    	Supported on-board devices:
-	 standard serial port (com)
-	 watchdog controller (sxidog)
-	 Ethernet controller (sxie)
-	 USB controller (ehci)
-	 AHCI controller (ahci)
-	 GPIO controller (sxipio)
-
-    SABRE Lite, Nitrogen6X, Wandboard, CuBox-i4Pro, Utilite, Novena
-        Supported on-board devices:
-	 standard serial port (com)
-	 USB controller (ehci)
-	 watchdog controller (imxdog)
-	 Ethernet controller (fec)
-	 GPIO controller (imxgpio)
-	 OTP controller (imxocotp)
-	 AHCI controller (ahci)
+	Pine64
+	Raspberry Pi 3
diff --git a/distrib/notes/arm64/prep b/distrib/notes/arm64/prep
index 2919b58c25a..c6972d59e7b 100644
--- a/distrib/notes/arm64/prep
+++ b/distrib/notes/arm64/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl	$OpenBSD: prep,v 1.2 2017/01/25 03:10:06 patrick Exp $
 Please be aware that OpenBSD support for this platform is far from
 complete.
 
@@ -31,11 +31,6 @@ Booting from an SD card:
   When you have connected the BeagleBoard to you computer, a command such
   as "cu -l cuaU0 -s 115200" (assuming cuaU0 is your serial port device)
   should connect you to the board's console.
-  
-  Note: By default the BeagleBone Black will boot from the internal emmc.
-  In order to make it boot from the micro SD card, you will need to hold down
-  the small button located by the SD card slot while powering on the board.
-  Once you have done this the board will boot from the SD card as the default.
 
 Running EFI payloads with U-Boot:
 
@@ -58,7 +53,7 @@ Install on systems without a supported miniroot:
   If a miniroot is not available for your system you will have to modify
   an existing image before booting it.
 
-  To do so first install the u-boot-arm and dtb packages.  Write one of the
+  To do so first install the u-boot-aarch64 and dtb packages.  Write one of the
   provided miniroot images to an SD card:
 
  	dd if=miniroot-beagle-{:--:}OSrev.fs of=/dev/rsdXc
@@ -66,21 +61,9 @@ Install on systems without a supported miniroot:
   Add a board specific DTB file:
 
  	mount /dev/sdXi /mnt
- 	cp /usr/local/share/dtb/arm/board.dtb /mnt/
+ 	cp /usr/local/share/dtb/arm64/board.dtb /mnt/
  	umount /mnt
 
-  For systems based on Texas Instruments OMAP and AMxxxx SoCs:
-
- 	mount /dev/sdXi /mnt
- 	cp /usr/local/share/u-boot/board/{MLO,u-boot.img} /mnt/
- 	umount /mnt
-
-  For systems based on Freescale/NXP i.MX SoCs:
-
- 	dd if=/usr/local/share/u-boot/board/SPL of=/dev/rsdXc bs=1024 seek=1
- 	dd if=/usr/local/share/u-boot/board/u-boot.img \
- 	    of=/dev/rsdXc bs=1024 seek=69
-
   For systems based on Allwinner Axx Socs:
 
  	dd if=/usr/local/share/u-boot/board/u-boot-sunxi-with-spl.bin \
diff --git a/distrib/notes/arm64/whatis b/distrib/notes/arm64/whatis
index f0e4855ba18..362dd049315 100644
--- a/distrib/notes/arm64/whatis
+++ b/distrib/notes/arm64/whatis
@@ -1,6 +1,4 @@
-dnl	$OpenBSD: whatis,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl	$OpenBSD: whatis,v 1.2 2017/01/25 03:10:06 patrick Exp $
 
-OpenBSD/MACHINE runs on the BeagleBoard and newer xM models, as well as
-PandaBoard, PandaBoard ES, BeagleBone, BeagleBone Black, SABRE Lite,
-Nitrogen6X, Wandboard, CuBox-i4Pro, Utilite and Novena. Hardware support is
-currently limited, but this port is a heavy work in progress.
+OpenBSD/MACHINE runs on the Pine64 and the Raspberry Pi 3.  Hardware support
+is currently limited, but this port is a heavy work in progress.