Start at the port of OpenBSD to the OpenMoko hardware. Work in progress.

49 files changed, 2488 insertions, 0 deletions

diff --git a/sys/arch/moko/Makefile b/sys/arch/moko/Makefile
new file mode 100644
index 00000000000..d9ff48db4cc
--- /dev/null
+++ b/sys/arch/moko/Makefile
@@ -0,0 +1,38 @@
+# 	$OpenBSD: Makefile,v 1.1 2008/11/26 14:47:50 drahn Exp $
+#	$NetBSD: Makefile,v 1.1 2001/06/12 08:32:46 chris Exp $
+
+# Makefile for moko tags file and boot blocks
+
+S=${.CURDIR}/../..
+.include "$S/kern/Make.tags.inc"
+
+SUBDIR=	stand
+
+NOPROG=	noprog
+NOMAN=	noman
+
+TMOKO=	$S/arch/moko/tags
+
+SMOKO=	$S/arch/moko/dev/*.[ch] $S/arch/moko/include/*.h \
+		$S/arch/moko/moko/*.[ch] $S/arch/arm/arm/*.[ch] \
+		$S/arch/arm/include/*.h $S/arch/arm/mainbus/*.[ch] \
+AMOKO=	$S/arch/moko/moko/*.S $S/arch/arm/arm/*.S \
+		$S/arch/arm/mainbus/*.S
+
+# Directories in which to place tags links
+DMOKO=	dev include moko
+
+tags:
+	-ctags -wdtf ${TMOKO} ${SMOKO} ${COMM}
+	egrep "^ENTRY(.*)|^ALTENTRY(.*)" ${AMOKO} | \
+	    sed "s;\([^:]*\):\([^(]*\)(\([^, )]*\)\(.*\);\3	\1	/^\2(\3\4$$/;" \
+	    >> ${TMOKO}
+	sort -o ${TMOKO} ${TMOKO}
+
+links:
+	-for i in ${DMOKO}; do \
+	    (cd $$i && { rm -f tags; ln -s ${TMOKO} tags; }) done
+
+obj:	_SUBDIRUSE
+
+.include <bsd.prog.mk>
diff --git a/sys/arch/moko/compile/.cvsignore b/sys/arch/moko/compile/.cvsignore
new file mode 100644
index 00000000000..b72af3039e6
--- /dev/null
+++ b/sys/arch/moko/compile/.cvsignore
@@ -0,0 +1,2 @@
+GENERIC
+RAMDISK
diff --git a/sys/arch/moko/conf/Makefile.moko b/sys/arch/moko/conf/Makefile.moko
new file mode 100644
index 00000000000..deda7bc6086
--- /dev/null
+++ b/sys/arch/moko/conf/Makefile.moko
@@ -0,0 +1,220 @@
+#	$OpenBSD: Makefile.moko,v 1.1 2008/11/26 14:47:50 drahn Exp $
+
+# Makefile for OpenBSD
+#
+# This makefile is constructed from a machine description:
+#	config machineid
+# Most changes should be made in the machine description
+#	/sys/arch/moko/conf/``machineid''
+# after which you should do
+#	config machineid
+# Machine generic makefile changes should be made in
+#	/sys/arch/moko/conf/Makefile.moko
+# after which config should be rerun for all machines of that type.
+#
+# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
+#	IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING
+#
+# -DTRACE	compile in kernel tracing hooks
+# -DQUOTA	compile in file system quotas
+
+# DEBUG is set to -g if debugging.
+# PROF is set to -pg if profiling.
+
+.include <bsd.own.mk>
+
+MKDEP?=	mkdep
+SIZE?=	size
+STRIP?=	strip
+
+# source tree is located via $S relative to the compilation directory
+.ifndef S
+S!=	cd ../../../..; pwd
+.endif
+THISARM=	$S/arch/moko
+ARM=	$S/arch/arm
+
+INCLUDES=	-nostdinc -I. -I$S -I$S/arch
+CPPFLAGS=	${INCLUDES} ${IDENT} -D_KERNEL -D__moko__
+CDIAGFLAGS=	-Werror -Wall -Wstrict-prototypes -Wmissing-prototypes \
+		-Wno-uninitialized -Wno-format -Wno-main \
+		-Wstack-larger-than-2047 -Wvariable-decl
+
+CMACHFLAGS= -ffreestanding
+#CMACHFLAGS=	-march=armv4 -mtune=strongarm -ffreestanding
+.if ${IDENT:M-DNO_PROPOLICE}
+CMACHFLAGS+=	-fno-stack-protector
+.endif
+CMACHFLAGS+=	-msoft-float -fno-builtin-printf -fno-builtin-log
+
+COPTS?=		-O2
+CFLAGS=		${DEBUG} ${CDIAGFLAGS} ${CMACHFLAGS} ${COPTS} ${PIPE}
+AFLAGS=		-x assembler-with-cpp -D_LOCORE ${CMACHFLAGS} 
+#LINKFLAGS=	-Ttext 0xF0000020 -e start --warn-common
+#LINKFLAGS=	-T ${THISARM}/conf/kern.ldscript
+LINKFLAGS=	-T ldscript
+LINKFLAGS+=	--warn-common
+STRIPFLAGS=	-g -X -x
+
+HOSTCC= ${CC}
+HOSTED_CPPFLAGS=${CPPFLAGS:S/^-nostdinc$//}
+HOSTED_CFLAGS=	${CFLAGS}
+
+# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP}
+# where TYPE is NORMAL, DRIVER, or PROFILE; SUFFIX is the file suffix,
+# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file
+# is marked as config-dependent.
+
+NORMAL_C_NOP=	${CC} ${CFLAGS} ${CPPFLAGS} -c $<
+NORMAL_C=	${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} -c $<
+NORMAL_C_C=	${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} ${PARAM} -c $<
+
+DRIVER_C=	${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} -c $<
+DRIVER_C_C=	${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} ${PARAM} -c $<
+
+NORMAL_S=	${CC} ${AFLAGS} ${CPPFLAGS} -c $<
+NORMAL_S_C=	${CC} ${AFLAGS} ${CPPFLAGS} ${PARAM} -c $<
+
+HOSTED_C=	${HOSTCC} ${HOSTED_CFLAGS} ${HOSTED_CPPFLAGS} -c $<
+
+%OBJS
+
+%CFILES
+
+%SFILES
+
+# load lines for config "xxx" will be emitted as:
+# xxx: ${SYSTEM_DEP} swapxxx.o
+#	${SYSTEM_LD_HEAD}
+#	${SYSTEM_LD} swapxxx.o
+#	${SYSTEM_LD_TAIL}
+SYSTEM_OBJ=	${BOARDTYPE}_start.o locore.o param.o ioconf.o ${OBJS}
+SYSTEM_DEP=	Makefile ${SYSTEM_OBJ}
+SYSTEM_LD_HEAD=	rm -f $@
+SYSTEM_LD_HEAD+=; \
+    cat ${ARM}/conf/ldscript.head ${ARM}/conf/ldscript.tail |  \
+	sed -e 's/@KERNEL_BASE_PHYS@/${KERNEL_BASE_PHYS}/' \
+	-e 's/@KERNEL_BASE_VIRT@/${KERNEL_BASE_VIRT}/' \
+     > ldscript
+
+SYSTEM_LD=	@echo ${LD} ${LINKFLAGS} -o $@ '$${SYSTEM_OBJ}' vers.o; \
+		${LD} ${LINKFLAGS} -o $@ ${SYSTEM_OBJ} vers.o
+SYSTEM_LD_TAIL=	@${SIZE} $@; chmod 755 $@
+
+DEBUG?=
+.if ${DEBUG} == "-g"
+LINKFLAGS+=	-X
+SYSTEM_LD_TAIL+=; \
+		echo mv $@ $@.gdb; rm -f $@.gdb; mv $@ $@.gdb; \
+		echo ${STRIP} ${STRIPFLAGS} -o $@ $@.gdb; \
+		${STRIP} ${STRIPFLAGS} -o $@ $@.gdb
+.else
+LINKFLAGS+=	-x
+.endif
+
+%LOAD
+
+assym.h: $S/kern/genassym.sh ${ARM}/arm/genassym.cf Makefile
+	cat ${ARM}/arm/genassym.cf | \
+	    sh $S/kern/genassym.sh ${CC} ${CFLAGS} \
+	    ${CPPFLAGS} ${PARAM} > assym.h.tmp && \
+	    mv -f assym.h.tmp assym.h
+
+param.c: $S/conf/param.c
+	rm -f param.c
+	cp $S/conf/param.c .
+
+param.o: param.c Makefile
+	${NORMAL_C_C}
+
+mcount.o: $S/lib/libkern/mcount.c Makefile
+	${NORMAL_C_NOP}
+
+ioconf.o: ioconf.c
+	${NORMAL_C}
+
+newvers: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
+	sh $S/conf/newvers.sh
+	${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} -c vers.c
+
+
+clean::
+	rm -f eddep *bsd bsd.gdb tags *.[io] [a-z]*.s \
+	    [Ee]rrs linterrs makelinks assym.h
+
+lint:
+	@lint -hbxncez -Dvolatile= ${CPPFLAGS} ${PARAM} -UKGDB \
+	    ${CFILES} ioconf.c param.c | \
+	    grep -v 'static function .* unused'
+
+tags:
+	@echo "see $S/kern/Makefile for tags"
+
+links:
+	egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
+	  sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
+	echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
+	  sort -u | comm -23 - dontlink | \
+	  sed 's,.*/\(.*.o\),rm -f \1; ln -s ../GENERIC/\1 \1,' > makelinks
+	sh makelinks && rm -f dontlink makelinks
+
+SRCS=	${ARM}/arm/locore.S \
+	param.c ioconf.c ${CFILES} ${SFILES}
+depend:: .depend
+.depend: ${SRCS} assym.h param.c ${APMINC}
+	${MKDEP} ${AFLAGS} ${CPPFLAGS} ${ARM}/arm/locore.S
+	${MKDEP} -a ${CFLAGS} ${CPPFLAGS} param.c ioconf.c ${CFILES}
+.if ${SFILES} != ""
+	${MKDEP} -a ${AFLAGS} ${CPPFLAGS} ${SFILES}
+.endif
+	cat ${ARM}/arm/genassym.cf | \
+	    sh $S/kern/genassym.sh ${MKDEP} -f assym.dep ${CFLAGS} \
+	    ${CPPFLAGS} 
+	@sed -e 's/.*\.o:.* /assym.h: /' < assym.dep >> .depend
+	@rm -f assym.dep
+
+
+# depend on root or device configuration
+autoconf.o conf.o: Makefile
+ 
+# depend on network or filesystem configuration 
+uipc_domain.o uipc_proto.o vfs_conf.o: Makefile 
+if.o if_tun.o if_loop.o if_ethersubr.o: Makefile
+if_arp.o if_ether.o: Makefile
+ip_input.o ip_output.o in_pcb.o in_proto.o: Makefile
+tcp_subr.o tcp_timer.o tcp_output.o: Makefile
+
+# depend on maxusers
+machdep.o: Makefile
+
+# depend on CPU configuration 
+locore.o machdep.o: Makefile
+
+${BOARDTYPE}_start.o: ${THISARM}/moko/${BOARDTYPE}_start.S assym.h
+	${NORMAL_S}
+
+locore.o: ${ARM}/arm/locore.S assym.h
+	${NORMAL_S}
+
+bsd.rd: bsd
+	cp bsd bsd.rd
+	$S/../distrib/${BOARDTYPE}/ramdisk/rdsetroot < $S/../distrib/${BOARDTYPE}/ramdisk/mr.fs bsd.rd
+
+bsd.img: bsd.rd
+	${OBJCOPY} -O binary bsd.rd bsd.i
+	gzip < bsd.i > bsd.rdi.gz
+	mkimage -A arm -O openbsd -T kernel -C gzip -a ${KERNEL_BASE_PHYS} -e ${KERNEL_BASE_PHYS} -n "OpenBSD" -d bsd.rdi.gz bsd.img
+
+# The install target can be redefined by putting a
+# install-kernel-${MACHINE_NAME} target into /etc/mk.conf
+MACHINE_NAME!=  uname -n
+install: install-kernel-${MACHINE_NAME}
+.if !target(install-kernel-${MACHINE_NAME}})
+install-kernel-${MACHINE_NAME}:
+	rm -f /obsd
+	ln /bsd /obsd
+	cp bsd /nbsd
+	mv /nbsd /bsd
+.endif
+
+%RULES
diff --git a/sys/arch/moko/conf/RAMDISK b/sys/arch/moko/conf/RAMDISK
new file mode 100644
index 00000000000..889b2d01b44
--- /dev/null
+++ b/sys/arch/moko/conf/RAMDISK
@@ -0,0 +1,63 @@
+#	$OpenBSD: RAMDISK,v 1.1 2008/11/26 14:47:50 drahn Exp $
+
+machine	moko	arm
+
+options	TIMEZONE=0	# time zone to adjust RTC time by
+options	DST=0		# daylight saving time used by RTC
+options	FFS		# UFS
+options	CD9660		# ISO 9660 + Rock Ridge file system
+options	MSDOSFS		# MS-DOS file system
+options	INET		# IP + ICMP + TCP + UDP
+options	INET6		# IPv6 (needs INET)
+options	DDB		# kernel debugger
+options	EXT2FS		# Second Extended Filesystem
+
+options		ARM32
+
+options		CACHE_CLEAN_BLOCK_INTR
+options		SSCOM_S3C2410
+options		SSCOM0CONSOLE
+
+options		S3C2XX0_XTAL_CLK=12000000
+
+makeoptions	KERNEL_BASE_PHYS="0x30300000"
+makeoptions	KERNEL_BASE_VIRT="0xc0300000"
+makeoptions	BOARDTYPE="moko"
+
+# estimated number of users
+
+maxusers	32
+
+# CPU options
+options		CPU_ARM9	# Support the XScale core
+#options	XSCALE_CACHE_WRITE_THROUGH
+
+#option	WSDISPLAY_COMPAT_USL		# VT handling
+#option	WSDISPLAY_COMPAT_RAWKBD		# provide raw scancodes; needed for X11
+#option	WSDISPLAY_DEFAULTSCREENS=2	# initial number of text consoles
+#option	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls; needed for X11
+
+config		bsd	root on rd0a swap on rd0b
+
+# The main bus device
+mainbus0	at root
+cpu0		at mainbus?
+ssio0		at mainbus?
+# integrated UART
+sscom0  at ssio? index 0        # irq 70
+#sscom1  at ssio? index 1        # irq 73
+
+
+# Pseudo-Devices
+pseudo-device	wsmux		2	# mouse & keyboard multiplexor
+#pseudo-device	crypto		1
+pseudo-device	loop		1	# network loopback
+pseudo-device	bpfilter	1	# packet filter
+pseudo-device	rd		1	# ram disk
+pseudo-device	bio		1	# ioctl multiplexing device
+
+options	BOOT_CONFIG	# boot-time kernel config
+
+# RAMDISK stuff
+options	MINIROOTSIZE=5120
+options	RAMDISK_HOOKS
diff --git a/sys/arch/moko/conf/files.moko b/sys/arch/moko/conf/files.moko
new file mode 100644
index 00000000000..68112eafc20
--- /dev/null
+++ b/sys/arch/moko/conf/files.moko
@@ -0,0 +1,70 @@
+#	$OpenBSD: files.moko,v 1.1 2008/11/26 14:47:50 drahn Exp $
+#
+# First try for arm-specific configuration info
+#
+
+maxpartitions	16
+maxusers	2 8 64
+
+major	{wd = 16}
+major	{sd = 24}
+major	{cd = 26}
+major	{rd = 18}
+
+file	arch/arm/arm/conf.c
+
+file	arch/moko/moko/moko_machdep.c
+
+#
+# Machine-independent SCSI drivers
+#
+include "../../../scsi/files.scsi"
+include "../../../dev/atapiscsi/files.atapiscsi"
+
+include "arch/arm/s3c2xx0/files.s3c2410"
+
+
+
+
+#
+# Machine-independent ATA drivers
+#
+include "dev/ata/files.ata"
+
+# Generic MD files
+file	arch/moko/moko/autoconf.c
+
+file	arch/arm/arm/disksubr.c			disk
+
+# ARM FPE
+file	arch/arm/fpe-arm/armfpe_glue.S		armfpe
+file	arch/arm/fpe-arm/armfpe_init.c		armfpe
+file	arch/arm/fpe-arm/armfpe.s		armfpe
+
+# Machine-independent I2O drivers.
+include "dev/i2o/files.i2o"
+
+# Include WSCONS stuff
+include "dev/wscons/files.wscons"
+include "dev/rasops/files.rasops"
+include "dev/wsfont/files.wsfont"
+include "dev/pckbc/files.pckbc"
+
+# Include USB stuff
+include "dev/usb/files.usb"
+
+# Bluetooth
+include "dev/bluetooth/files.bluetooth"
+
+# Media Independent Interface (mii)
+include "dev/mii/files.mii"
+
+#
+# Machine-independent SD/MMC drivers
+#
+include "dev/sdmmc/files.sdmmc"
+
+#
+# Machine-independent 1-Wire drivers
+#
+include "dev/onewire/files.onewire"
diff --git a/sys/arch/moko/include/_types.h b/sys/arch/moko/include/_types.h
new file mode 100644
index 00000000000..4c23f11f13c
--- /dev/null
+++ b/sys/arch/moko/include/_types.h
@@ -0,0 +1,11 @@
+/* 	$OpenBSD: _types.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+
+#ifndef _MOKO_TYPES_H_
+#define	_MOKO_TYPES_H_
+
+#include <arm/_types.h>
+
+#define __HAVE_GENERIC_SOFT_INTERRUPTS
+#define __HAVE_TIMECOUNTER
+
+#endif
diff --git a/sys/arch/moko/include/apmvar.h b/sys/arch/moko/include/apmvar.h
new file mode 100644
index 00000000000..dfce83ed6c6
--- /dev/null
+++ b/sys/arch/moko/include/apmvar.h
@@ -0,0 +1 @@
+#include <arm/apmvar.h>
diff --git a/sys/arch/moko/include/asm.h b/sys/arch/moko/include/asm.h
new file mode 100644
index 00000000000..58a834bd185
--- /dev/null
+++ b/sys/arch/moko/include/asm.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: asm.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: asm.h,v 1.3 2001/11/25 15:55:54 thorpej Exp $	*/
+
+#include <arm/asm.h>
diff --git a/sys/arch/moko/include/atomic.h b/sys/arch/moko/include/atomic.h
new file mode 100644
index 00000000000..a06ed7888eb
--- /dev/null
+++ b/sys/arch/moko/include/atomic.h
@@ -0,0 +1,10 @@
+/*	$OpenBSD: atomic.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+
+/* Public Domain */
+
+#ifndef __MOKO_ATOMIC_H__
+#define __MOKO_ATOMIC_H__
+
+#include <arm/atomic.h>
+
+#endif /* __MOKO_ATOMIC_H__ */
diff --git a/sys/arch/moko/include/bootconfig.h b/sys/arch/moko/include/bootconfig.h
new file mode 100644
index 00000000000..23618d1be9a
--- /dev/null
+++ b/sys/arch/moko/include/bootconfig.h
@@ -0,0 +1,76 @@
+/*	$OpenBSD: bootconfig.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: bootconfig.h,v 1.2 2001/06/21 22:08:28 chris Exp $	*/
+
+/*
+ * Copyright (c) 1994 Mark Brinicombe.
+ * Copyright (c) 1994 Brini.
+ * All rights reserved.
+ *
+ * This code is derived from software written for Brini by Mark Brinicombe
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Mark Brinicombe
+ *	for the NetBSD Project.
+ * 4. The name of the company nor the name of the author may be used to
+ *    endorse or promote products derived from this software without specific
+ *    prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * boot configuration structures
+ *
+ * Created      : 12/09/94
+ *
+ * Based on kate/boot/bootconfig.h
+ */
+
+typedef struct _PhysMem {
+	u_int address;
+	u_int pages;
+} PhysMem;
+
+#if defined(_KERNEL)
+
+#define	DRAM_BLOCKS	1
+
+typedef struct _BootConfig {
+	PhysMem dram[DRAM_BLOCKS];
+	u_int dramblocks;
+} BootConfig;
+
+extern BootConfig bootconfig;
+#define MAX_BOOT_STRING 255
+
+#define BOOTOPT_TYPE_BOOLEAN		0
+#define BOOTOPT_TYPE_STRING		1
+#define BOOTOPT_TYPE_INT		2
+#define BOOTOPT_TYPE_BININT		3
+#define BOOTOPT_TYPE_HEXINT		4
+#define BOOTOPT_TYPE_MASK		7
+
+int get_bootconf_option (char *string, char *option, int type, void *result);
+
+extern char *boot_args;
+extern char *boot_file;
+#endif	/* _KERNEL */
+
+/* End of bootconfig.h */
diff --git a/sys/arch/moko/include/bus.h b/sys/arch/moko/include/bus.h
new file mode 100644
index 00000000000..46728f6516e
--- /dev/null
+++ b/sys/arch/moko/include/bus.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: bus.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: bus.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $	*/
+
+#include <arm/bus.h>
diff --git a/sys/arch/moko/include/cdefs.h b/sys/arch/moko/include/cdefs.h
new file mode 100644
index 00000000000..a59e4e43757
--- /dev/null
+++ b/sys/arch/moko/include/cdefs.h
@@ -0,0 +1,3 @@
+/*	$OpenBSD: cdefs.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+
+#include <arm/cdefs.h>
diff --git a/sys/arch/moko/include/conf.h b/sys/arch/moko/include/conf.h
new file mode 100644
index 00000000000..fc45d3f86a6
--- /dev/null
+++ b/sys/arch/moko/include/conf.h
@@ -0,0 +1,19 @@
+/*	$OpenBSD: conf.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: conf.h,v 1.8 2002/02/10 12:26:03 chris Exp $	*/
+
+#ifndef _MOKO_CONF_H
+#define	_MOKO_CONF_H
+
+#include <sys/conf.h>
+
+/*
+ * MOKO specific device includes go in here
+ */
+
+//#define CONF_HAVE_APM
+#define	CONF_HAVE_USB
+#define	CONF_HAVE_WSCONS
+
+#include <arm/conf.h>
+
+#endif	/* _MOKO_CONF_H */
diff --git a/sys/arch/moko/include/cpu.h b/sys/arch/moko/include/cpu.h
new file mode 100644
index 00000000000..cfd9d838561
--- /dev/null
+++ b/sys/arch/moko/include/cpu.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: cpu.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: cpu.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $	*/
+
+#include <arm/cpu.h>
diff --git a/sys/arch/moko/include/db_machdep.h b/sys/arch/moko/include/db_machdep.h
new file mode 100644
index 00000000000..3f4b9333e38
--- /dev/null
+++ b/sys/arch/moko/include/db_machdep.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: db_machdep.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: db_machdep.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $	*/
+
+#include <arm/db_machdep.h>
diff --git a/sys/arch/moko/include/disklabel.h b/sys/arch/moko/include/disklabel.h
new file mode 100644
index 00000000000..1c0a7c435f1
--- /dev/null
+++ b/sys/arch/moko/include/disklabel.h
@@ -0,0 +1,3 @@
+/*	$OpenBSD: disklabel.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+
+#include <arm/disklabel.h>
diff --git a/sys/arch/moko/include/endian.h b/sys/arch/moko/include/endian.h
new file mode 100644
index 00000000000..99041e16d9d
--- /dev/null
+++ b/sys/arch/moko/include/endian.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: endian.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: endian.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $	*/
+
+#include <arm/endian.h>
diff --git a/sys/arch/moko/include/exec.h b/sys/arch/moko/include/exec.h
new file mode 100644
index 00000000000..53fa453b754
--- /dev/null
+++ b/sys/arch/moko/include/exec.h
@@ -0,0 +1,3 @@
+/*	$OpenBSD: exec.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/* public domain */
+#include <arm/exec.h>
diff --git a/sys/arch/moko/include/float.h b/sys/arch/moko/include/float.h
new file mode 100644
index 00000000000..fa2e2249f53
--- /dev/null
+++ b/sys/arch/moko/include/float.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: float.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: float.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $	*/
+
+#include <arm/float.h>
diff --git a/sys/arch/moko/include/fp.h b/sys/arch/moko/include/fp.h
new file mode 100644
index 00000000000..9abd735a1ec
--- /dev/null
+++ b/sys/arch/moko/include/fp.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: fp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: fp.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $	*/
+
+#include <arm/fp.h>
diff --git a/sys/arch/moko/include/frame.h b/sys/arch/moko/include/frame.h
new file mode 100644
index 00000000000..110ad69ce5b
--- /dev/null
+++ b/sys/arch/moko/include/frame.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: frame.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/* $NetBSD: frame.h,v 1.1 2001/06/08 22:23:00 chris Exp $ */
+
+#include <arm/frame.h>
diff --git a/sys/arch/moko/include/ieee.h b/sys/arch/moko/include/ieee.h
new file mode 100644
index 00000000000..e1ad062370b
--- /dev/null
+++ b/sys/arch/moko/include/ieee.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: ieee.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: ieee.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $	*/
+
+#include <arm/ieee.h>
diff --git a/sys/arch/moko/include/ieeefp.h b/sys/arch/moko/include/ieeefp.h
new file mode 100644
index 00000000000..efcd0ff7ec2
--- /dev/null
+++ b/sys/arch/moko/include/ieeefp.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: ieeefp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: ieeefp.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $	*/
+
+#include <arm/ieeefp.h>
diff --git a/sys/arch/moko/include/internal_types.h b/sys/arch/moko/include/internal_types.h
new file mode 100644
index 00000000000..a9e0d001189
--- /dev/null
+++ b/sys/arch/moko/include/internal_types.h
@@ -0,0 +1,7 @@
+/* $OpenBSD: internal_types.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
+/* Public domain */
+#ifndef _MACHINE_INTERNAL_TYPES_H_
+#define _MACHINE_INTERNAL_TYPES_H_
+
+#include "arm/internal_types.h"
+#endif
diff --git a/sys/arch/moko/include/intr.h b/sys/arch/moko/include/intr.h
new file mode 100644
index 00000000000..f0658764ab2
--- /dev/null
+++ b/sys/arch/moko/include/intr.h
@@ -0,0 +1,105 @@
+/*	$OpenBSD: intr.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: intr.h,v 1.12 2003/06/16 20:00:59 thorpej Exp $	*/
+
+/*
+ * Copyright (c) 2001, 2003 Wasabi Systems, Inc.
+ * All rights reserved.
+ *
+ * Written by Jason R. Thorpe for Wasabi Systems, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed for the NetBSD Project by
+ *	Wasabi Systems, Inc.
+ * 4. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef	_EVBARM_INTR_H_
+#define	_EVBARM_INTR_H_
+
+#ifdef _KERNEL
+
+
+/* Interrupt priority "levels". */
+#define	IPL_NONE	0	/* nothing */
+#define	IPL_SOFT	1	/* generic software interrupts */
+#define	IPL_SOFTCLOCK	2	/* software clock interrupt */
+#define	IPL_SOFTNET	3	/* software network interrupt */
+#define	IPL_BIO		4	/* block I/O */
+#define	IPL_NET		5	/* network */
+#define	IPL_SOFTSERIAL	6	/* software serial interrupt */
+#define	IPL_TTY		7	/* terminals */
+#define	IPL_VM		8	/* memory allocation */
+#define	IPL_AUDIO	9	/* audio device */
+#define	IPL_CLOCK	10	/* clock interrupt */
+#define	IPL_STATCLOCK	11	/* statistics clock interrupt */
+#define	IPL_HIGH	12	/* everything */
+#define	IPL_SERIAL	13	/* serial device */
+
+#define	NIPL		14
+
+/* Interrupt sharing types. */
+#define	IST_NONE	0	/* none */
+#define	IST_PULSE	1	/* pulsed */
+#define	IST_EDGE	2	/* edge-triggered */
+#define	IST_LEVEL	3	/* level-triggered */
+
+#define IST_LEVEL_LOW	 IST_LEVEL
+#define IST_LEVEL_HIGH   4
+#define IST_EDGE_FALLING IST_EDGE
+#define IST_EDGE_RISING  5
+#define IST_EDGE_BOTH    6
+
+#ifndef _LOCORE
+
+#include <sys/device.h>
+#include <sys/queue.h>
+
+#define	splhigh()	_splraise(IPL_HIGH)
+#define	splsoft()	_splraise(IPL_SOFT)
+#define	splsoftclock()	_splraise(IPL_SOFTCLOCK)
+#define	splsoftnet()	_splraise(IPL_SOFTNET)
+#define	splbio()	_splraise(IPL_BIO)
+#define	splnet()	_splraise(IPL_NET)
+#define	spltty()	_splraise(IPL_TTY)
+#define	splvm()		_splraise(IPL_VM)
+#define	splaudio()	_splraise(IPL_AUDIO)
+#define	splclock()	_splraise(IPL_CLOCK)
+#define	splstatclock()	_splraise(IPL_STATCLOCK)
+#define	splserial()	_splraise(IPL_SERIAL)
+
+#define	spl0()		_spllower(IPL_NONE)
+
+#define	splsched()	splhigh()
+#define	spllock()	splhigh()
+
+#endif /* ! _LOCORE */
+
+#include <arm/s3c2xx0/s3c2410_intr.h>
+
+#endif /* _KERNEL */
+
+#endif	/* _EVBARM_INTR_H_ */
+
diff --git a/sys/arch/moko/include/limits.h b/sys/arch/moko/include/limits.h
new file mode 100644
index 00000000000..96b0001ec1e
--- /dev/null
+++ b/sys/arch/moko/include/limits.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: limits.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: limits.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $	*/
+
+#include <arm/limits.h>
diff --git a/sys/arch/moko/include/loadfile_machdep.h b/sys/arch/moko/include/loadfile_machdep.h
new file mode 100644
index 00000000000..4390f306174
--- /dev/null
+++ b/sys/arch/moko/include/loadfile_machdep.h
@@ -0,0 +1,52 @@
+/*	$OpenBSD: loadfile_machdep.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: loadfile_machdep.h,v 1.1 1999/04/29 03:17:12 tsubai Exp $	*/
+
+/*-
+ * Copyright (c) 1999 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Christos Zoulas.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define BOOT_ELF
+#define ELFSIZE 32
+
+#define LOAD_KERNEL	(LOAD_ALL & ~LOAD_TEXTA)
+#define COUNT_KERNEL	(COUNT_ALL & ~COUNT_TEXTA)
+
+#define LOADADDR(a)		((((u_long)(a)) + offset)&0xfffffff)
+#define ALIGNENTRY(a)		((u_long)(a))
+#define READ(f, b, c)		read((f), (void *)LOADADDR(b), (c))
+#define BCOPY(s, d, c)		memcpy((void *)LOADADDR(d), (void *)(s), (c))
+#define BZERO(d, c)		memset((void *)LOADADDR(d), 0, (c))
+#define	WARN(a)			(void)(printf a, \
+				    printf((errno ? ": %s\n" : "\n"), \
+				    strerror(errno)))
+#define PROGRESS(a)		(void) printf a
+#define ALLOC(a)		alloc(a)
+#define FREE(a, b)		free(a, b)
+#define OKMAGIC(a)		((a) == OMAGIC)
+
+void run_loadfile(u_long *, int);
diff --git a/sys/arch/moko/include/lock.h b/sys/arch/moko/include/lock.h
new file mode 100644
index 00000000000..707232f98cf
--- /dev/null
+++ b/sys/arch/moko/include/lock.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: lock.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: lock.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $	*/
+
+#include <arm/lock.h>
diff --git a/sys/arch/moko/include/mutex.h b/sys/arch/moko/include/mutex.h
new file mode 100644
index 00000000000..6324ae4058d
--- /dev/null
+++ b/sys/arch/moko/include/mutex.h
@@ -0,0 +1,3 @@
+/*	$OpenBSD: mutex.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/* public domain */
+#include <arm/mutex.h>
diff --git a/sys/arch/moko/include/param.h b/sys/arch/moko/include/param.h
new file mode 100644
index 00000000000..3fa378f46b5
--- /dev/null
+++ b/sys/arch/moko/include/param.h
@@ -0,0 +1,51 @@
+/*	$OpenBSD: param.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: param.h,v 1.4 2002/02/12 06:58:19 thorpej Exp $	*/
+
+/*
+ * Copyright (c) 1994,1995 Mark Brinicombe.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by the RiscBSD team.
+ * 4. The name "RiscBSD" nor the name of the author may be used to
+ *    endorse or promote products derived from this software without specific
+ *    prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RISCBSD ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL RISCBSD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef	_MOKO_PARAM_H_
+#define	_MOKO_PARAM_H_
+
+/*
+ * 1 page should be enough
+ */
+#ifndef MSGBUFSIZE
+#define MSGBUFSIZE	(1*NBPG)
+#endif
+
+#include <arm/param.h>
+
+#define	_MACHINE	moko
+#define	MACHINE		"moko"
+
+#endif	/* _MOKO_PARAM_H_ */
diff --git a/sys/arch/moko/include/pcb.h b/sys/arch/moko/include/pcb.h
new file mode 100644
index 00000000000..680c1fe87b5
--- /dev/null
+++ b/sys/arch/moko/include/pcb.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: pcb.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: pcb.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $	*/
+
+#include <arm/pcb.h>
diff --git a/sys/arch/moko/include/pio.h b/sys/arch/moko/include/pio.h
new file mode 100644
index 00000000000..1360b2c43f7
--- /dev/null
+++ b/sys/arch/moko/include/pio.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: pio.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/* $NetBSD: pio.h,v 1.3 2001/12/07 23:09:33 chris Exp $ */
+
+#include <arm/pio.h>
diff --git a/sys/arch/moko/include/pmap.h b/sys/arch/moko/include/pmap.h
new file mode 100644
index 00000000000..2be90c7642d
--- /dev/null
+++ b/sys/arch/moko/include/pmap.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: pmap.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/* $NetBSD: pmap.h,v 1.2 2001/11/23 17:29:01 thorpej Exp $ */
+
+#include <arm/pmap.h>
diff --git a/sys/arch/moko/include/proc.h b/sys/arch/moko/include/proc.h
new file mode 100644
index 00000000000..7612fc2e983
--- /dev/null
+++ b/sys/arch/moko/include/proc.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: proc.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: proc.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $	*/
+
+#include <arm/proc.h>
diff --git a/sys/arch/moko/include/profile.h b/sys/arch/moko/include/profile.h
new file mode 100644
index 00000000000..6f5dac5f8d2
--- /dev/null
+++ b/sys/arch/moko/include/profile.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: profile.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: profile.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $	*/
+
+#include <arm/profile.h>
diff --git a/sys/arch/moko/include/psl.h b/sys/arch/moko/include/psl.h
new file mode 100644
index 00000000000..bea8545a2c9
--- /dev/null
+++ b/sys/arch/moko/include/psl.h
@@ -0,0 +1 @@
+/*	$OpenBSD: psl.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
diff --git a/sys/arch/moko/include/ptrace.h b/sys/arch/moko/include/ptrace.h
new file mode 100644
index 00000000000..3e6c527c823
--- /dev/null
+++ b/sys/arch/moko/include/ptrace.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: ptrace.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: ptrace.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/ptrace.h>
diff --git a/sys/arch/moko/include/reg.h b/sys/arch/moko/include/reg.h
new file mode 100644
index 00000000000..f5890b92e76
--- /dev/null
+++ b/sys/arch/moko/include/reg.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: reg.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: reg.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/reg.h>
diff --git a/sys/arch/moko/include/reloc.h b/sys/arch/moko/include/reloc.h
new file mode 100644
index 00000000000..a3f2d660180
--- /dev/null
+++ b/sys/arch/moko/include/reloc.h
@@ -0,0 +1,2 @@
+/*	$OpenBSD: reloc.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+#include <arm/reloc.h>
diff --git a/sys/arch/moko/include/setjmp.h b/sys/arch/moko/include/setjmp.h
new file mode 100644
index 00000000000..0b9adcf6bf3
--- /dev/null
+++ b/sys/arch/moko/include/setjmp.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: setjmp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: setjmp.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/setjmp.h>
diff --git a/sys/arch/moko/include/signal.h b/sys/arch/moko/include/signal.h
new file mode 100644
index 00000000000..a372fb8119d
--- /dev/null
+++ b/sys/arch/moko/include/signal.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: signal.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: signal.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/signal.h>
diff --git a/sys/arch/moko/include/spinlock.h b/sys/arch/moko/include/spinlock.h
new file mode 100644
index 00000000000..784f95c8aee
--- /dev/null
+++ b/sys/arch/moko/include/spinlock.h
@@ -0,0 +1,7 @@
+
+/*	$OpenBSD: spinlock.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+#ifndef _MOKO_SPINLOCK_H_
+#define _MOKO_SPINLOCK_H_
+#include <arm/spinlock.h>
+#endif /* _MOKO_SPINLOCK_H_ */
+
diff --git a/sys/arch/moko/include/stdarg.h b/sys/arch/moko/include/stdarg.h
new file mode 100644
index 00000000000..8d28cc23536
--- /dev/null
+++ b/sys/arch/moko/include/stdarg.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: stdarg.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: stdarg.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/stdarg.h>
diff --git a/sys/arch/moko/include/sysarch.h b/sys/arch/moko/include/sysarch.h
new file mode 100644
index 00000000000..c63aca4c916
--- /dev/null
+++ b/sys/arch/moko/include/sysarch.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: sysarch.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: sysarch.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/sysarch.h>
diff --git a/sys/arch/moko/include/trap.h b/sys/arch/moko/include/trap.h
new file mode 100644
index 00000000000..8223c2b18bf
--- /dev/null
+++ b/sys/arch/moko/include/trap.h
@@ -0,0 +1,4 @@
+/*	$OpenBSD: trap.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: trap.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $	*/
+
+#include <arm/trap.h>
diff --git a/sys/arch/moko/include/vmparam.h b/sys/arch/moko/include/vmparam.h
new file mode 100644
index 00000000000..14a3a237c34
--- /dev/null
+++ b/sys/arch/moko/include/vmparam.h
@@ -0,0 +1,86 @@
+/* 	$OpenBSD: vmparam.h,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: vmparam.h,v 1.23 2003/05/22 05:47:07 thorpej Exp $	*/
+
+/*
+ * Copyright (c) 1988 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef	_ARM32_VMPARAM_H_
+#define	_ARM32_VMPARAM_H_
+
+#define	ARM_KERNEL_BASE		0xc0000000
+
+#include <arm/vmparam.h>
+
+#ifdef _KERNEL
+/*
+ * Address space constants
+ */
+
+/*
+ * The line between user space and kernel space
+ * Mappings >= KERNEL_BASE are constant across all processes
+ */
+#define	KERNEL_BASE		ARM_KERNEL_BASE
+
+/*
+ * Override the default pager_map size, there's not enough KVA.
+ */
+#define PAGER_MAP_SIZE		(4 * 1024 * 1024)
+
+/*
+ * Size of User Raw I/O map
+ */
+
+#define USRIOSIZE       300
+
+/* virtual sizes (bytes) for various kernel submaps */
+
+#define VM_PHYS_SIZE		(USRIOSIZE*PAGE_SIZE)
+
+/*
+ * max number of non-contig chunks of physical RAM you can have
+ */
+
+#define	VM_PHYSSEG_MAX		1
+#define	VM_PHYSSEG_STRAT	VM_PSTRAT_RANDOM
+
+/*
+ * this indicates that we can't add RAM to the VM system after the
+ * vm system is init'd.
+ */
+
+#define	VM_PHYSSEG_NOADD
+
+#endif /* _KERNEL */
+
+#define	VM_NFREELIST		1
+#define	VM_FREELIST_DEFAULT	0
+
+
+#endif	/* _ARM32_VMPARAM_H_ */
diff --git a/sys/arch/moko/moko/autoconf.c b/sys/arch/moko/moko/autoconf.c
new file mode 100644
index 00000000000..21a5afd339c
--- /dev/null
+++ b/sys/arch/moko/moko/autoconf.c
@@ -0,0 +1,152 @@
+/*	$OpenBSD: autoconf.c,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: autoconf.c,v 1.2 2001/09/05 16:17:36 matt Exp $	*/
+
+/*
+ * Copyright (c) 1994-1998 Mark Brinicombe.
+ * Copyright (c) 1994 Brini.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Mark Brinicombe for
+ *      the NetBSD project.
+ * 4. The name of the company nor the name of the author may be used to
+ *    endorse or promote products derived from this software without specific
+ *    prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * RiscBSD kernel project
+ *
+ * autoconf.c
+ *
+ * Autoconfiguration functions
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/reboot.h>
+#include <sys/disklabel.h>
+#include <sys/device.h>
+#include <sys/conf.h>
+#include <sys/kernel.h>
+#include <sys/timeout.h>
+#include <sys/malloc.h>
+
+#include <uvm/uvm_extern.h>
+
+#include <machine/bootconfig.h>
+#include <machine/intr.h>
+#include <dev/cons.h>
+
+int booted_partition;
+struct device *bootdv = NULL;
+extern char *boot_file;
+
+void dumpconf(void);
+
+/*
+ * Now that we are fully operational, we can checksum the
+ * disks, and using some heuristics, hopefully are able to
+ * always determine the correct root disk.
+ */
+void
+diskconf()
+{
+#if 0
+	dev_t tmpdev;
+#endif
+
+#if 0
+	/*
+	 * Configure root, swap, and dump area.  This is
+	 * currently done by running the same checksum
+	 * algorithm over all known disks, as was done in
+	 * /boot.  Then we basically fixup the *dev vars
+	 * from the info we gleaned from this.
+	 */
+	dkcsumattach();
+#endif
+
+#if 0
+	/*
+	 * XXX
+	 * zaurus bootblocks currently pass in "bsd" instead of
+	 * "device:bsd", or any such thing, making this a real pain.
+	 */
+	if (bootdv == NULL)
+		bootdv = parsedisk("wd0a", strlen("wd0a"), 0, &tmpdev);
+	if (bootdv == NULL)
+		printf("boot device: lookup '%s' failed.\n", boot_file);
+	else
+		printf("boot device: %s\n", bootdv->dv_xname);
+#endif
+
+	setroot(bootdv, 0, RB_USERREQ);
+	dumpconf();
+
+}
+
+void
+device_register(struct device *dev, void *aux)
+{
+}
+
+/*
+ * void cpu_configure()
+ *
+ * Configure all the root devices
+ * The root devices are expected to configure their own children
+ */
+void
+cpu_configure(void)
+{
+	softintr_init();
+
+	/*
+	 * Since various PCI interrupts could be routed via the ICU
+	 * (for PCI devices in the bridge) we need to set up the ICU
+	 * now so that these interrupts can be established correctly
+	 * i.e. This is a hack.
+	 */
+
+	config_rootfound("mainbus", NULL);
+
+	/*
+	 * We can not know which is our root disk, defer
+	 * until we can checksum blocks to figure it out.
+	 */
+	cold = 0;
+
+	/* Time to start taking interrupts so lets open the flood gates .... */
+	(void)spl0();
+
+}
+
+struct nam2blk nam2blk[] = {
+	{ "wd",		16 },
+	{ "sd",		24 },
+	{ "cd",		26 },
+	{ "rd",		18 },
+	{ "raid",	71 },
+	{ "vnd",	19 },
+	{ NULL,		-1 }
+};
diff --git a/sys/arch/moko/moko/moko_machdep.c b/sys/arch/moko/moko/moko_machdep.c
new file mode 100644
index 00000000000..c16c410523d
--- /dev/null
+++ b/sys/arch/moko/moko/moko_machdep.c
@@ -0,0 +1,1233 @@
+/*	$OpenBSD: moko_machdep.c,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+/*	$NetBSD: lubbock_machdep.c,v 1.2 2003/07/15 00:25:06 lukem Exp $ */
+
+/*
+ * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
+ * Written by Hiroyuki Bessho for Genetec Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of Genetec Corporation may not be used to endorse or 
+ *    promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/*
+ * Copyright (c) 2001 Wasabi Systems, Inc.
+ * All rights reserved.
+ *
+ * Written by Jason R. Thorpe for Wasabi Systems, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed for the NetBSD Project by
+ *	Wasabi Systems, Inc.
+ * 4. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 1997,1998 Mark Brinicombe.
+ * Copyright (c) 1997,1998 Causality Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Mark Brinicombe
+ *	for the NetBSD Project.
+ * 4. The name of the company nor the name of the author may be used to
+ *    endorse or promote products derived from this software without specific
+ *    prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
+
+#include <sys/param.h>
+#include <sys/device.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/exec.h>
+#include <sys/proc.h>
+#include <sys/msgbuf.h>
+#include <sys/reboot.h>
+#include <sys/termios.h>
+#include <sys/kcore.h>
+
+#include <uvm/uvm_extern.h>
+
+#include <sys/conf.h>
+#include <sys/queue.h>
+#include <sys/device.h>
+#include <dev/cons.h>
+#include <dev/ic/smc91cxxreg.h>
+
+#include <machine/db_machdep.h>
+#include <ddb/db_sym.h>
+#include <ddb/db_extern.h>
+#ifdef KGDB
+#include <sys/kgdb.h>
+#endif
+
+#include <machine/bootconfig.h>
+#include <machine/bus.h>
+#include <machine/cpu.h>
+#include <machine/frame.h>
+#include <arm/kcore.h>
+#include <arm/machdep.h>
+#include <machine/intr.h>
+#include <arm/undefined.h>
+
+#include <arm/s3c2xx0/s3c2410reg.h>
+#include <arm/s3c2xx0/s3c2410var.h>
+
+#ifdef CONF_HAVE_APM
+#include "apm.h"
+#if NAPM > 0
+#include <moko/dev/moko_apm.h>
+#endif
+#endif
+
+#include "wsdisplay.h"
+
+/*
+ * Address to map I/O registers in early initialize stage.
+ */
+#define SMDK2410_IO_VBASE       0xfd000000
+
+/* Kernel text starts 3MB in from the bottom of the kernel address space. */
+#define KERNEL_OFFSET 0x00300000
+#define	KERNEL_TEXT_BASE	(KERNEL_BASE + KERNEL_OFFSET)
+#define	KERNEL_VM_BASE		(KERNEL_BASE + 0x04000000)
+
+/*
+ * The range 0xc1000000 - 0xccffffff is available for kernel VM space
+ * Core-logic registers and I/O mappings occupy 0xfd000000 - 0xffffffff
+ */
+#define KERNEL_VM_SIZE		0x10000000
+
+/*
+ * Address to call from cpu_reset() to reset the machine.
+ * This is machine architecture dependant as it varies depending
+ * on where the ROM appears when you turn the MMU off.
+ */
+
+u_int cpu_reset_address = 0;
+
+/* Define various stack sizes in pages */
+#define IRQ_STACK_SIZE	1
+#define ABT_STACK_SIZE	1
+#ifdef IPKDB
+#define UND_STACK_SIZE	2
+#else
+#define UND_STACK_SIZE	1
+#endif
+
+BootConfig bootconfig;		/* Boot config storage */
+char *boot_args = NULL;
+char *boot_file = NULL;
+
+paddr_t physical_start;
+paddr_t physical_freestart;
+paddr_t physical_freeend;
+paddr_t physical_end;
+u_int free_pages;
+int physmem = 0;
+
+/*int debug_flags;*/
+#ifndef PMAP_STATIC_L1S
+int max_processes = 64;			/* Default number */
+#endif	/* !PMAP_STATIC_L1S */
+
+/* Physical and virtual addresses for some global pages */
+pv_addr_t systempage;
+pv_addr_t irqstack;
+pv_addr_t undstack;
+pv_addr_t abtstack;
+extern pv_addr_t kernelstack;
+pv_addr_t minidataclean;
+
+paddr_t msgbufphys;
+
+extern u_int data_abort_handler_address;
+extern u_int prefetch_abort_handler_address;
+extern u_int undefined_handler_address;
+
+#ifdef PMAP_DEBUG
+extern int pmap_debug_level;
+#endif
+
+#define KERNEL_PT_SYS		0	/* Page table for mapping proc0 zero page */
+#define KERNEL_PT_KERNEL	1	/* Page table for mapping kernel */
+#define	KERNEL_PT_KERNEL_NUM	32
+#define KERNEL_PT_VMDATA	(KERNEL_PT_KERNEL+KERNEL_PT_KERNEL_NUM)
+				        /* Page tables for mapping kernel VM */
+#define	KERNEL_PT_VMDATA_NUM	8	/* start with 32MB of KVM */
+#define NUM_KERNEL_PTS		(KERNEL_PT_VMDATA + KERNEL_PT_VMDATA_NUM)
+
+pv_addr_t kernel_pt_table[NUM_KERNEL_PTS];
+
+extern struct user *proc0paddr;
+
+#define	BOOT_STRING_MAGIC 0x4f425344
+
+char	bootargs[MAX_BOOT_STRING];
+void	process_kernel_args(char *);
+
+/* Prototypes */
+
+void	consinit(void);
+void	early_clkman(u_int, int);
+void	kgdb_port_init(void);
+void	change_clock(uint32_t v);
+
+bs_protos(bs_notimpl);
+
+#include "sscom.h"
+#if NSSCOM > 0
+#include <arch/arm/s3c2xx0/sscom_var.h>
+#endif
+
+#ifndef CONSPEED
+#define CONSPEED B115200	/* What RedBoot uses */
+#endif
+#ifndef CONMODE
+#define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */
+#endif
+
+int comcnspeed = CONSPEED;
+int comcnmode = CONMODE;
+
+
+/*
+ * void boot(int howto, char *bootstr)
+ *
+ * Reboots the system
+ *
+ * Deal with any syncing, unmounting, dumping and shutdown hooks,
+ * then reset the CPU.
+ */
+void
+boot(int howto)
+{
+	if (cold) {
+		/*
+		 * If the system is cold, just halt, unless the user
+		 * explicitely asked for reboot.
+		 */
+		if ((howto & RB_USERREQ) == 0)
+			howto |= RB_HALT;
+		goto haltsys;
+	}
+
+	/*
+	 * If RB_NOSYNC was not specified sync the discs.
+	 * Note: Unless cold is set to 1 here, syslogd will die during the
+	 * unmount.  It looks like syslogd is getting woken up only to find
+	 * that it cannot page part of the binary in as the filesystem has
+	 * been unmounted.
+	 */
+	if (!(howto & RB_NOSYNC))
+		bootsync(howto);
+
+	/* Say NO to interrupts */
+	splhigh();
+
+#if 0
+	/* Do a dump if requested. */
+	if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP)
+		dumpsys();
+#endif
+	
+haltsys:
+	doshutdownhooks();
+
+	/* Make sure IRQ's are disabled */
+	IRQdisable;
+
+	if (howto & RB_HALT) {
+#if NAPM > 0
+		if (howto & RB_POWERDOWN) {
+
+			printf("\nAttempting to power down...\n");
+			delay(6000000);
+			zapm_poweroff();
+		}
+#endif
+
+		printf("The operating system has halted.\n");
+		printf("Please press any key to reboot.\n\n");
+		cnpollc(1);
+		cngetc();
+		cnpollc(0);
+	}
+
+	printf("rebooting...\n");
+	delay(6000000);
+#if NAPM > 0
+	zapm_restart();
+#endif
+	printf("reboot failed; spinning\n");
+	while(1);
+	/*NOTREACHED*/
+}
+
+static __inline
+pd_entry_t *
+read_ttb(void)
+{
+  long ttb;
+
+  __asm __volatile("mrc	p15, 0, %0, c2, c0, 0" : "=r" (ttb));
+
+
+  return (pd_entry_t *)(ttb & ~((1<<14)-1));
+}
+
+/*
+ * Mapping table for core kernel memory. These areas are mapped in
+ * init time at fixed virtual address with section mappings. 
+ */
+
+#define _A(a)   ((a) & ~L1_S_OFFSET)
+#define _S(s)   (((s) + L1_S_SIZE - 1) & ~(L1_S_SIZE-1))
+
+#define _V(n)   (SMDK2410_IO_VBASE + (n) * L1_S_SIZE)
+
+#define GPIO_VBASE	_V(0)
+#define INTCTL_VBASE	_V(1)
+#define CLKMAN_VBASE	_V(2)
+#define UART_VBASE	_V(3)
+#define MOKO_VBASE_FREE	_V(4)
+
+const struct pmap_devmap smdk2410_devmap[] = {
+	{
+		GPIO_VBASE,
+		_A(S3C2410_GPIO_BASE),
+		_S(S3C2410_GPIO_SIZE),
+		VM_PROT_READ|VM_PROT_WRITE,
+		PTE_NOCACHE
+	}, {
+		INTCTL_VBASE,
+		_A(S3C2410_INTCTL_BASE),
+		_S(S3C2410_INTCTL_SIZE),
+		VM_PROT_READ|VM_PROT_WRITE,
+		PTE_NOCACHE
+	}, {
+		CLKMAN_VBASE,
+		_A(S3C2410_CLKMAN_BASE),
+		_S(S3C24X0_CLKMAN_SIZE),
+		VM_PROT_READ|VM_PROT_WRITE,
+		PTE_NOCACHE
+	}, { /* UART registers for UART0, 1, 2. */
+		UART_VBASE,
+		_A(S3C2410_UART0_BASE),
+		_S(S3C2410_UART_BASE(3) - S3C2410_UART0_BASE),
+		VM_PROT_READ|VM_PROT_WRITE,
+		PTE_NOCACHE
+	}, {
+		0, 0, 0, 0
+	}
+};
+
+#undef _A
+#undef _S
+
+#define VERBOSE_INIT_ARM
+#if 1
+static void
+map_io_area(paddr_t pagedir)
+{
+	int loop;
+
+	/*
+	 * Map devices we can map w/ section mappings.
+	 */
+	loop = 0;
+	while (smdk2410_devmap[loop].pd_size) {
+		vsize_t sz;
+
+#ifdef VERBOSE_INIT_ARM
+		printf("%08lx -> %08lx @ %08lx\n", smdk2410_devmap[loop].pd_pa,
+		    smdk2410_devmap[loop].pd_pa + smdk2410_devmap[loop].pd_size - 1,
+		    smdk2410_devmap[loop].pd_va);
+#endif
+		for (sz = 0; sz < smdk2410_devmap[loop].pd_size; sz += L1_S_SIZE)
+			pmap_map_section(pagedir,
+			    smdk2410_devmap[loop].pd_va + sz,
+			    smdk2410_devmap[loop].pd_pa + sz,
+			    smdk2410_devmap[loop].pd_prot,
+			    smdk2410_devmap[loop].pd_cache);
+		++loop;
+	}
+}
+#endif
+
+/*
+ * simple memory mapping function used in early bootstrap stage
+ * before pmap is initialized.
+ * size and cacheability are ignored and map one section with nocache.
+ */
+static vaddr_t section_free = MOKO_VBASE_FREE;
+
+static int
+bootstrap_bs_map(void *t, bus_addr_t bpa, bus_size_t size,
+    int cacheable, bus_space_handle_t *bshp)
+{
+	u_long startpa;
+	vaddr_t va;
+	pd_entry_t *pagedir = read_ttb();
+	/* This assumes PA==VA for page directory */
+
+	/* search smdk2410_devmap for desired mapping */
+	{ 
+		int i;
+		for (i = 0; smdk2410_devmap[i].pd_va != 0; i++) {
+			if (smdk2410_devmap[i].pd_pa <= bpa &&
+			    smdk2410_devmap[i].pd_pa+L1_S_SIZE > bpa) {
+				/* falls in region */
+				*bshp = (bus_space_handle_t)
+				    (smdk2410_devmap[i].pd_va +
+					(bpa - smdk2410_devmap[i].pd_pa));
+				return (0);
+			}
+		}
+	};
+
+	va = section_free;
+	section_free += L1_S_SIZE;
+
+	startpa = trunc_page(bpa);
+	pmap_map_section((vaddr_t)pagedir, va, startpa, 
+	    VM_PROT_READ | VM_PROT_WRITE, PTE_NOCACHE);
+	cpu_tlb_flushD();
+
+	*bshp = (bus_space_handle_t)(va + (bpa - startpa));
+
+	return(0);
+}
+
+/*
+ * u_int initarm(...)
+ *
+ * Initial entry point on startup. This gets called before main() is
+ * entered.
+ * It should be responsible for setting up everything that must be
+ * in place when main is called.
+ * This includes
+ *   Taking a copy of the boot configuration structure.
+ *   Initialising the physical console so characters can be printed.
+ *   Setting up page tables for the kernel
+ *   Relocating the kernel to the bottom of physical memory
+ */
+u_int ol1pagetable;
+u_int
+initarm(void *arg)
+{
+	extern cpu_kcore_hdr_t cpu_kcore_hdr;
+	int loop;
+	int loop1;
+	u_int l1pagetable;
+	pv_addr_t kernel_l1pt;
+	paddr_t memstart;
+	psize_t memsize;
+	extern u_int32_t esym;	/* &_end if no symbols are loaded */
+
+#if 0
+	int led_data = 0;
+#endif
+	/* early bus_space_map support */
+	int	(*map_func_save)(void *, bus_addr_t, bus_size_t, int, 
+	    bus_space_handle_t *);
+#if 0
+	struct bus_space tmp_bs_tag;
+
+
+	/* XXX */
+	/* start 32.768KHz OSC */
+	ioreg_write(PXA2X0_CLKMAN_BASE + 0x08, 2);
+#endif
+
+	/*
+	 * Heads up ... Setup the CPU / MMU / TLB functions
+	 */
+	if (set_cpufuncs())
+		panic("cpu not recognized!");
+
+	/* Get ready for splfoo() */
+	s3c2xx0_intr_bootstrap(INTCTL_VBASE);
+
+
+
+#if 0
+	/* Calibrate the delay loop. */
+#endif
+
+#if 0
+	/*
+	 * Okay, RedBoot has provided us with the following memory map:
+	 *
+	 * Physical Address Range     Description 
+	 * -----------------------    ---------------------------------- 
+	 * 0x00000000 - 0x01ffffff    flash Memory   (32MB)
+	 * 0x04000000 - 0x05ffffff    Application flash Memory  (32MB)
+	 * 0x08000000 - 0x080000ff    I/O baseboard registers
+	 * 0x0a000000 - 0x0a0fffff    SRAM (1MB)
+	 * 0x0c000000 - 0x0c0fffff    Ethernet Controller
+	 * 0x0e000000 - 0x0e0fffff    Ethernet Controller (Attribute)
+	 * 0x10000000 - 0x103fffff    SA-1111 Companion Chip
+	 * 0x14000000 - 0x17ffffff    Expansion Card (64MB)
+	 * 0x40000000 - 0x480fffff    Processor Registers
+	 * 0xa0000000 - 0xa3ffffff    SDRAM Bank 0 (64MB)
+	 *
+	 *
+	 * Virtual Address Range    X C B  Description 
+	 * -----------------------  - - -  ---------------------------------- 
+	 * 0x00000000 - 0x00003fff  N Y Y  SDRAM 
+	 * 0x00004000 - 0x000fffff  N Y N  Boot ROM
+	 * 0x00100000 - 0x01ffffff  N N N  Application Flash
+	 * 0x04000000 - 0x05ffffff  N N N  Exp Application Flash
+	 * 0x08000000 - 0x080fffff  N N N  I/O baseboard registers
+	 * 0x0a000000 - 0x0a0fffff  N N N  SRAM
+	 * 0x40000000 - 0x480fffff  N N N  Processor Registers
+	 * 0xa0000000 - 0xa000ffff  N Y N  RedBoot SDRAM 
+	 * 0xa0017000 - 0xa3ffffff  Y Y Y  SDRAM
+	 * 0xc0000000 - 0xcfffffff  Y Y Y  Cache Flush Region 
+	 * (done by this routine)
+	 * 0xfd000000 - 0xfd0000ff  N N N  I/O baseboard registers
+	 * 0xfd100000 - 0xfd2fffff  N N N  Processor Registers.
+	 * 0xfd200000 - 0xfd2fffff  N N N  0x10800000 registers
+	 *
+	 * The first level page table is at 0xa0004000.  There are also
+	 * 2 second-level tables at 0xa0008000 and 0xa0008400.
+	 *
+	 */
+
+#endif
+	{
+		/*
+		 * Tweak U-boots's pagetable so that we can access to
+		 * some registers at same VA before and after installing 
+		 * our page table. 
+		 */
+		paddr_t ttb = (paddr_t)read_ttb();
+		map_io_area(ttb);
+
+		cpu_tlb_flushD();
+	}
+
+	/*
+	 * Examine the boot args string for options we need to know about
+	 * now.
+	 */
+	/* XXX should really be done after setting up the console, but we
+	 * XXX need to parse the console selection flags right now. */
+	process_kernel_args((char *)0x30000000+KERNEL_OFFSET - MAX_BOOT_STRING - 1);
+
+
+#if 0
+	/* setup GPIO for BTUART, in case bootloader doesn't take care of it */
+	pxa2x0_gpio_bootstrap(ZAURUS_GPIO_VBASE);
+	pxa2x0_gpio_set_function(42, GPIO_ALT_FN_1_IN);
+	pxa2x0_gpio_set_function(43, GPIO_ALT_FN_2_OUT);
+	pxa2x0_gpio_set_function(44, GPIO_ALT_FN_1_IN);
+	pxa2x0_gpio_set_function(45, GPIO_ALT_FN_2_OUT);
+
+	/* FFUART */
+	pxa2x0_gpio_set_function(34, GPIO_ALT_FN_1_IN);
+	pxa2x0_gpio_set_function(39, GPIO_ALT_FN_2_OUT);
+	pxa2x0_gpio_set_function(35, GPIO_ALT_FN_1_IN);
+	pxa2x0_gpio_set_function(40, GPIO_ALT_FN_2_OUT);
+	pxa2x0_gpio_set_function(41, GPIO_ALT_FN_2_OUT);
+
+	/* STUART */
+	pxa2x0_gpio_set_function(46, GPIO_ALT_FN_2_IN);
+	pxa2x0_gpio_set_function(47, GPIO_ALT_FN_1_OUT);
+#endif
+
+	/* XXX */
+	pmap_devmap_bootstrap(l1pagetable, smdk2410_devmap);
+	/*
+	 * Temporarily replace bus_space_map() functions so that
+	 * console devices can get mapped.
+	 *
+	 * Note that this relies upon the fact that both regular
+	 * and a4x bus_space tags use the same map function.
+	 */
+	map_func_save = s3c2xx0_bs_tag.bs_map;
+	s3c2xx0_bs_tag.bs_map = bootstrap_bs_map;
+
+	/* setup a serial console for very early boot */
+	consinit();
+
+#ifdef KGDB
+	kgdb_port_init();
+#endif
+
+
+	/* Talk to the user */
+	printf("\nOpenBSD/moko booting ...\n");
+
+	{
+		/* XXX - all Zaurus have this for now, fix memory sizing */
+		memstart = 0x30000000;
+		memsize =  0x04000000; /* 64MB */
+	}
+
+#define DEBUG
+#ifdef DEBUG
+	printf("initarm: Configuring system ...\n");
+#endif
+
+	/* Fake bootconfig structure for the benefit of pmap.c */
+	/* XXX must make the memory description h/w independant */
+	bootconfig.dramblocks = 1;
+	bootconfig.dram[0].address = memstart;
+	bootconfig.dram[0].pages = memsize / PAGE_SIZE;
+
+	/*
+	 * Set up the variables that define the availablilty of
+	 * physical memory.  For now, we're going to set
+	 * physical_freestart to 0x30000000+KERNEL_OFFSET (where the kernel
+	 * was loaded), and allocate the memory we need downwards.
+	 * If we get too close to the page tables that RedBoot
+	 * set up, we will panic.  We will update physical_freestart
+	 * and physical_freeend later to reflect what pmap_bootstrap()
+	 * wants to see.
+	 *
+	 * XXX pmap_bootstrap() needs an enema.
+	 */
+	physical_start = bootconfig.dram[0].address;
+	physical_end = physical_start + (bootconfig.dram[0].pages * PAGE_SIZE);
+
+	physical_freestart = 0x30009000UL;
+	physical_freeend = 0x30000000UL+KERNEL_OFFSET;
+
+	physmem = (physical_end - physical_start) / PAGE_SIZE;
+
+#ifdef DEBUG
+	/* Tell the user about the memory */
+	printf("physmemory: %d pages at 0x%08lx -> 0x%08lx\n", physmem,
+	    physical_start, physical_end - 1);
+#endif
+
+	/*
+	 * Okay, the kernel starts 2MB in from the bottom of physical
+	 * memory.  We are going to allocate our bootstrap pages downwards
+	 * from there.
+	 *
+	 * We need to allocate some fixed page tables to get the kernel
+	 * going.  We allocate one page directory and a number of page
+	 * tables and store the physical addresses in the kernel_pt_table
+	 * array.
+	 *
+	 * The kernel page directory must be on a 16K boundary.  The page
+	 * tables must be on 4K bounaries.  What we do is allocate the
+	 * page directory on the first 16K boundary that we encounter, and
+	 * the page tables on 4K boundaries otherwise.  Since we allocate
+	 * at least 3 L2 page tables, we are guaranteed to encounter at
+	 * least one 16K aligned region.
+	 */
+
+#ifdef VERBOSE_INIT_ARM
+	printf("Allocating page tables\n");
+#endif
+
+	free_pages = (physical_freeend - physical_freestart) / PAGE_SIZE;
+
+#ifdef VERBOSE_INIT_ARM
+	printf("freestart = 0x%08lx, free_pages = %d (0x%08x)\n",
+	       physical_freestart, free_pages, free_pages);
+#endif
+
+	/* Define a macro to simplify memory allocation */
+#define	valloc_pages(var, np)				\
+	alloc_pages((var).pv_pa, (np));			\
+	(var).pv_va = KERNEL_BASE + (var).pv_pa - physical_start;
+
+#define alloc_pages(var, np)				\
+	physical_freeend -= ((np) * PAGE_SIZE);		\
+	if (physical_freeend < physical_freestart)	\
+		panic("initarm: out of memory");	\
+	(var) = physical_freeend;			\
+	free_pages -= (np);				\
+	memset((char *)(var), 0, ((np) * PAGE_SIZE));
+
+	loop1 = 0;
+	kernel_l1pt.pv_pa = 0;
+	for (loop = 0; loop <= NUM_KERNEL_PTS; ++loop) {
+		/* Are we 16KB aligned for an L1 ? */
+		if (((physical_freeend - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) == 0
+		    && kernel_l1pt.pv_pa == 0) {
+			valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
+		} else {
+			valloc_pages(kernel_pt_table[loop1],
+			    L2_TABLE_SIZE / PAGE_SIZE);
+			++loop1;
+		}
+	}
+
+	/* This should never be able to happen but better confirm that. */
+	if (!kernel_l1pt.pv_pa || (kernel_l1pt.pv_pa & (L1_TABLE_SIZE-1)) != 0)
+		panic("initarm: Failed to align the kernel page directory");
+
+	/*
+	 * Allocate a page for the system page mapped to V0x00000000
+	 * This page will just contain the system vectors and can be
+	 * shared by all processes.
+	 */
+	alloc_pages(systempage.pv_pa, 1);
+
+	/* Allocate stacks for all modes */
+	valloc_pages(irqstack, IRQ_STACK_SIZE);
+	valloc_pages(abtstack, ABT_STACK_SIZE);
+	valloc_pages(undstack, UND_STACK_SIZE);
+	valloc_pages(kernelstack, UPAGES);
+
+#ifdef VERBOSE_INIT_ARM
+	printf("IRQ stack: p0x%08lx v0x%08lx\n", irqstack.pv_pa,
+	    irqstack.pv_va); 
+	printf("ABT stack: p0x%08lx v0x%08lx\n", abtstack.pv_pa,
+	    abtstack.pv_va); 
+	printf("UND stack: p0x%08lx v0x%08lx\n", undstack.pv_pa,
+	    undstack.pv_va); 
+	printf("SVC stack: p0x%08lx v0x%08lx\n", kernelstack.pv_pa,
+	    kernelstack.pv_va); 
+#endif
+
+	/*
+	 * XXX Defer this to later so that we can reclaim the memory
+	 * XXX used by the RedBoot page tables.
+	 */
+	alloc_pages(msgbufphys, round_page(MSGBUFSIZE) / PAGE_SIZE);
+
+	/*
+	 * Ok we have allocated physical pages for the primary kernel
+	 * page tables
+	 */
+
+#ifdef VERBOSE_INIT_ARM
+	printf("Creating L1 page table at 0x%08lx\n", kernel_l1pt.pv_pa);
+#endif
+
+	/*
+	 * Now we start construction of the L1 page table
+	 * We start by mapping the L2 page tables into the L1.
+	 * This means that we can replace L1 mappings later on if necessary
+	 */
+	l1pagetable = kernel_l1pt.pv_pa;
+
+	/* Map the L2 pages tables in the L1 page table */
+	pmap_link_l2pt(l1pagetable, 0x00000000,
+	    &kernel_pt_table[KERNEL_PT_SYS]);
+
+	for (loop = 0; loop < KERNEL_PT_KERNEL_NUM; loop++)
+		pmap_link_l2pt(l1pagetable, KERNEL_BASE + loop * 0x00400000,
+		    &kernel_pt_table[KERNEL_PT_KERNEL + loop]);
+
+	for (loop = 0; loop < KERNEL_PT_VMDATA_NUM; loop++)
+		pmap_link_l2pt(l1pagetable, KERNEL_VM_BASE + loop * 0x00400000,
+		    &kernel_pt_table[KERNEL_PT_VMDATA + loop]);
+
+	/* update the top of the kernel VM */
+	pmap_curmaxkvaddr =
+	    KERNEL_VM_BASE + (KERNEL_PT_VMDATA_NUM * 0x00400000);
+
+#ifdef VERBOSE_INIT_ARM
+	printf("Mapping kernel\n");
+#endif
+
+	/* Now we fill in the L2 pagetable for the kernel static code/data
+	 * and the symbol table. */
+	{
+		extern char etext[];
+		size_t textsize = (u_int32_t) etext - KERNEL_TEXT_BASE;
+		size_t totalsize = esym - KERNEL_TEXT_BASE;
+		u_int logical;
+
+		textsize = (textsize + PGOFSET) & ~PGOFSET;
+		totalsize = (totalsize + PGOFSET) & ~PGOFSET;
+		
+		logical = KERNEL_OFFSET;	/* offset of kernel in RAM */
+
+		/* Update dump information */
+		cpu_kcore_hdr.kernelbase = KERNEL_BASE;
+		cpu_kcore_hdr.kerneloffs = logical;
+		cpu_kcore_hdr.staticsize = totalsize;
+
+		logical += pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
+		    physical_start + logical, textsize,
+		    VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+		pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
+		    physical_start + logical, totalsize - textsize,
+		    VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+	}
+
+#ifdef VERBOSE_INIT_ARM
+	printf("Constructing L2 page tables\n");
+#endif
+
+	/* Map the stack pages */
+	pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
+	    IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+	pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
+	    ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+	pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
+	    UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+	pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
+	    UPAGES * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);
+
+	pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
+	    L1_TABLE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_PAGETABLE);
+
+	for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
+		pmap_map_chunk(l1pagetable, kernel_pt_table[loop].pv_va,
+		    kernel_pt_table[loop].pv_pa, L2_TABLE_SIZE,
+		    VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
+	}
+
+	/* Map the vector page. */
+#if 1
+	/* MULTI-ICE requires that page 0 is NC/NB so that it can download the
+	 * cache-clean code there.  */
+	pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
+	    VM_PROT_READ|VM_PROT_WRITE, PTE_NOCACHE);
+#else
+	pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
+	    VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
+#endif
+
+#if 1
+	/*
+	 * map integrated peripherals at same address in l1pagetable
+	 * so that we can continue to use console.
+	 */
+	pmap_devmap_bootstrap(l1pagetable, smdk2410_devmap);
+#endif
+
+	/*
+	 * Now we have the real page tables in place so we can switch to them.
+	 * Once this is done we will be running with the REAL kernel page
+	 * tables.
+	 */
+
+	/*
+	 * Update the physical_freestart/physical_freeend/free_pages
+	 * variables.
+	 */
+	{
+		physical_freestart = physical_start +
+		    (((esym + PGOFSET) & ~PGOFSET) - KERNEL_BASE);
+		physical_freeend = physical_end;
+		free_pages =
+		    (physical_freeend - physical_freestart) / PAGE_SIZE;
+	}
+
+	/* be a client to all domains */
+	cpu_domains(0x55555555);
+	/* Switch tables */
+#ifdef VERBOSE_INIT_ARM
+	printf("freestart = 0x%08lx - %08lx, free_pages = %d (0x%x)\n",
+	       physical_freestart, physical_freeend, free_pages, free_pages);
+	printf("switching to new L1 page table  @%#lx...", kernel_l1pt.pv_pa);
+#endif
+
+	/* set new intc register address so that splfoo() doesn't
+	   touch illegal address.  */
+	s3c2xx0_intr_bootstrap(INTCTL_VBASE);
+
+
+	cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
+	setttb(kernel_l1pt.pv_pa);
+	cpu_tlb_flushID();
+	cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));
+
+	/*
+	 * Moved from cpu_startup() as data_abort_handler() references
+	 * this during uvm init
+	 */
+	proc0paddr = (struct user *)kernelstack.pv_va;
+	proc0.p_addr = proc0paddr;
+
+	arm32_vector_init(ARM_VECTORS_LOW, ARM_VEC_ALL);
+
+#ifdef VERBOSE_INIT_ARM
+	printf("bootstrap done.\n");
+#endif
+
+
+	/*
+	 * Pages were allocated during the secondary bootstrap for the
+	 * stacks for different CPU modes.
+	 * We must now set the r13 registers in the different CPU modes to
+	 * point to these stacks.
+	 * Since the ARM stacks use STMFD etc. we must set r13 to the top end
+	 * of the stack memory.
+	 */
+#ifdef VERBOSE_INIT_ARM
+	printf("init subsystems: stacks ");
+#endif
+
+	set_stackptr(PSR_IRQ32_MODE,
+	    irqstack.pv_va + IRQ_STACK_SIZE * PAGE_SIZE);
+	set_stackptr(PSR_ABT32_MODE,
+	    abtstack.pv_va + ABT_STACK_SIZE * PAGE_SIZE);
+	set_stackptr(PSR_UND32_MODE,
+	    undstack.pv_va + UND_STACK_SIZE * PAGE_SIZE);
+
+	/*
+	 * Well we should set a data abort handler.
+	 * Once things get going this will change as we will need a proper
+	 * handler.
+	 * Until then we will use a handler that just panics but tells us
+	 * why.
+	 * Initialisation of the vectors will just panic on a data abort.
+	 * This just fills in a slightly better one.
+	 */
+#ifdef VERBOSE_INIT_ARM
+	printf("vectors ");
+#endif
+	data_abort_handler_address = (u_int)data_abort_handler;
+	prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
+	undefined_handler_address = (u_int)undefinedinstruction_bounce;
+
+	/* Initialise the undefined instruction handlers */
+#ifdef VERBOSE_INIT_ARM
+	printf("undefined ");
+#endif
+	undefined_init();
+
+	/* Load memory into UVM. */
+#ifdef VERBOSE_INIT_ARM
+	printf("page ");
+#endif
+	uvm_setpagesize();        /* initialize PAGE_SIZE-dependent variables */
+	uvm_page_physload(atop(physical_freestart), atop(physical_freeend),
+	    atop(physical_freestart), atop(physical_freeend),
+	    VM_FREELIST_DEFAULT);
+
+	/* Boot strap pmap telling it where the kernel page table is */
+#ifdef VERBOSE_INIT_ARM
+	printf("pmap ");
+#endif
+	pmap_bootstrap((pd_entry_t *)kernel_l1pt.pv_va, KERNEL_VM_BASE,
+	    KERNEL_VM_BASE + KERNEL_VM_SIZE);
+
+	/* Update dump information */
+	cpu_kcore_hdr.pmap_kernel_l1 = (u_int32_t)pmap_kernel()->pm_l1;
+	cpu_kcore_hdr.pmap_kernel_l2 = (u_int32_t)&(pmap_kernel()->pm_l2);
+
+#ifdef __HAVE_MEMORY_DISK__
+	md_root_setconf(memory_disk, sizeof memory_disk);
+#endif
+
+#ifdef IPKDB
+	/* Initialise ipkdb */
+	ipkdb_init();
+	if (boothowto & RB_KDB)
+		ipkdb_connect(0);
+#endif
+
+#ifdef KGDB
+	if (boothowto & RB_KDB) {
+		kgdb_debug_init = 1;
+		kgdb_connect(1);
+	}
+#endif
+
+	/*
+	 * Restore proper bus_space operation, now that pmap is initialized.
+	 */
+	s3c2xx0_bs_tag.bs_map = map_func_save;
+
+#ifdef DDB
+	db_machine_init();
+
+	/* Firmware doesn't load symbols. */
+	ddb_init();
+
+	if (boothowto & RB_KDB)
+		Debugger();
+#endif
+
+	/* We return the new stack pointer address */
+	return(kernelstack.pv_va + USPACE_SVC_STACK_TOP);
+}
+
+const char *console = "glass";
+
+void
+process_kernel_args(char *args)
+{
+	char *cp = args;
+
+	if (cp == NULL || *(int *)cp != BOOT_STRING_MAGIC) {
+		boothowto = RB_AUTOBOOT;
+		return;
+	}
+
+	/* Eat the cookie */
+	*(int *)cp = 0;
+	cp += sizeof(int);
+
+	boothowto = 0;
+
+	/* Make a local copy of the bootargs */
+	strncpy(bootargs, cp, MAX_BOOT_STRING - sizeof(int));
+
+	cp = bootargs;
+	boot_file = bootargs;
+
+	/* Skip the kernel image filename */
+	while (*cp != ' ' && *cp != 0)
+		++cp;
+
+	if (*cp != 0)
+		*cp++ = 0;
+
+	while (*cp == ' ')
+		++cp;
+
+	boot_args = cp;
+
+	printf("bootfile: %s\n", boot_file);
+	printf("bootargs: %s\n", boot_args);
+
+	/* Setup pointer to boot flags */
+	while (*cp != '-')
+		if (*cp++ == '\0')
+			return;
+
+	for (;*++cp;) {
+		int fl;
+
+		fl = 0;
+		switch(*cp) {
+		case 'a':
+			fl |= RB_ASKNAME;
+			break;
+		case 'c':
+			fl |= RB_CONFIG;
+			break;
+		case 'd':
+			fl |= RB_KDB;
+			break;
+		case 's':
+			fl |= RB_SINGLE;
+			break;
+		/* XXX undocumented console switching flags */
+		case '0':
+			console = "ffuart";
+			break;
+		case '1':
+			console = "btuart";
+			break;
+		case '2':
+			console = "stuart";
+			break;
+		default:
+			printf("unknown option `%c'\n", *cp);
+			break;
+		}
+		boothowto |= fl;
+	}
+}
+
+void
+consinit(void)
+{
+	static int consinit_done = 0;
+#if defined(SSCOM0CONSOLE) || defined(SSCOM1CONSOLE)
+	bus_space_tag_t iot = &s3c2xx0_bs_tag;
+#endif
+	int pclk;
+
+#if 0
+	char *console = CONSDEVNAME;
+#endif
+
+	if (consinit_done != 0)
+		return;
+
+	consinit_done = 1;
+
+	s3c24x0_clock_freq2(CLKMAN_VBASE, NULL, NULL, &pclk);
+
+#if NSSCOM > 0
+	if (0 == s3c2410_sscom_cnattach(iot, 0, comcnspeed,
+		pclk, comcnmode))
+		return;
+#if 0
+	/* XXX - delete this block */
+#ifdef SSCOM1CONSOLE
+	if (0 == s3c2410_sscom_cnattach(iot, 1, comcnspeed,
+		pclk, comcnmode))
+		return;
+#endif
+#endif /* delme */
+#endif                          /* NSSCOM */
+
+	consinit_done = 0;
+}
+
+#ifdef KGDB
+void
+kgdb_port_init(void)
+{
+#if (NCOM > 0) && defined(COM_PXA2X0)
+	paddr_t paddr;
+	u_int cken;
+
+	if (strcmp(kgdb_devname, "ffuart") == 0) {
+		paddr = PXA2X0_FFUART_BASE;
+		cken = CKEN_FFUART;
+	} else if (strcmp(kgdb_devname, "btuart") == 0) {
+		paddr = PXA2X0_BTUART_BASE;
+		cken = CKEN_BTUART;
+	} else if (strcmp(kgdb_devname, "stuart") == 0) {
+		paddr = PXA2X0_STUART_BASE;
+		cken = CKEN_STUART;
+		irda_on(0);
+	} else
+		return;
+
+	if (com_kgdb_attach_pxa2x0(&pxa2x0_a4x_bs_tag, paddr,
+	    kgdb_rate, PXA2X0_COM_FREQ, COM_TYPE_PXA2x0, comkgdbmode) == 0) {
+		early_clkman(cken, 1);
+	}
+#endif
+}
+#endif
+
+int glass_console = 0;
+
+void
+board_startup(void)
+{
+	extern int lcd_cnattach(void (*)(u_int, int));
+#if NWSDISPLAY > 0
+	extern bus_addr_t comconsaddr;
+#endif
+
+#if NWSDISPLAY > 0
+	/*
+	 * Try to attach the display console now that VM services
+	 * are available.
+	 */
+
+	if ((cputype & ~CPU_ID_XSCALE_COREREV_MASK) == CPU_ID_PXA27X) {
+		if (strcmp(console, "glass") == 0) {
+			printf("attempting to switch console to lcd screen\n");
+			glass_console = 1;
+		}
+		if (glass_console == 1 && lcd_cnattach(early_clkman) == 0) {
+			/*
+			 * Kill the existing serial console.
+			 * XXX need to bus_space_unmap resources and disable
+			 *     clocks...
+			 */
+			comconsaddr = 0;
+
+			/*
+			 * Display the copyright notice again on the new console
+			 */
+			extern const char copyright[];
+			printf("%s\n", copyright);
+		}
+	}
+#endif
+
+        if (boothowto & RB_CONFIG) {
+#ifdef BOOT_CONFIG
+		user_config();
+#else
+		printf("kernel does not support -c; continuing..\n");
+#endif
+	}
+}
+
+static struct arm32_dma_range smdk2410_dma_ranges[1];
+
+bus_dma_tag_t
+s3c2xx0_bus_dma_init(struct arm32_bus_dma_tag *dma_tag_template)
+{
+	extern paddr_t physical_start, physical_end;
+	struct arm32_bus_dma_tag *dmat;
+		
+	smdk2410_dma_ranges[0].dr_sysbase = physical_start;
+	smdk2410_dma_ranges[0].dr_busbase = physical_start;
+	smdk2410_dma_ranges[0].dr_len = physical_end - physical_start;
+	
+#if 1
+	dmat = dma_tag_template;
+#else
+	dmat = malloc(sizeof *dmat, M_DEVBUF, M_NOWAIT);   
+	if (dmat == NULL)
+		return NULL;
+	*dmat =  *dma_tag_template;
+#endif
+	
+	dmat->_ranges = smdk2410_dma_ranges;
+	dmat->_nranges = 1;
+
+	return dmat;
+}
+
diff --git a/sys/arch/moko/moko/moko_start.S b/sys/arch/moko/moko/moko_start.S
new file mode 100644
index 00000000000..b3d6282068b
--- /dev/null
+++ b/sys/arch/moko/moko/moko_start.S
@@ -0,0 +1,174 @@
+/*	$OpenBSD: moko_start.S,v 1.1 2008/11/26 14:47:50 drahn Exp $	*/
+
+/*
+ * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
+ * Written by Hiroyuki Bessho for Genetec Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of Genetec Corporation may not be used to endorse or 
+ *    promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <machine/asm.h>
+#include <arm/armreg.h>
+#include <arm/pte.h>
+#include <arm/pmap.h>		/* for PMAP_DOMAIN_KERNEL */
+
+#ifndef SDRAM_START
+#define SDRAM_START	0x30000000
+#endif
+
+/*
+ * CPWAIT -- Canonical method to wait for CP15 update.
+ * NOTE: Clobbers the specified temp reg.
+ * copied from arm/arm/cpufunc_asm_xscale.S
+ * XXX: better be in a common header file.
+ */
+#define	CPWAIT_BRANCH							 \
+	sub	pc, pc, #4
+
+#define	CPWAIT(tmp)							 \
+	mrc	p15, 0, tmp, c2, c0, 0	/* arbitrary read of CP15 */	;\
+	mov	tmp, tmp		/* wait for it to complete */	;\
+	CPWAIT_BRANCH			/* branch to next insn */
+	
+/*
+ * Kernel start routine for DBPXA250 (Lubbock)
+ * this code is excuted at the very first after the kernel is loaded
+ * by RedBoot.
+ */
+	.text
+
+	.global	_C_LABEL(moko_start)
+_C_LABEL(moko_start):
+	/* Are we running on ROM ? */
+	cmp     pc, #0x06000000
+	bhi     moko_start_ram
+
+	/* move me to RAM
+	 * XXX: we can use memcpy if it is PIC
+	 */
+	ldr r1, Lcopy_size
+	adr r0, _C_LABEL(moko_start)
+	add r1, r1, #3
+	mov r1, r1, LSR #2
+	mov r2, #SDRAM_START
+	add r2, r2, #0x00200000
+	mov r4, r2
+
+5:	ldr r3,[r0],#4
+	str r3,[r2],#4
+	subs r1,r1,#1
+	bhi 5b
+
+	cmp	pc, r5
+	/* Jump to RAM */
+	ldr r0, Lstart_off
+
+	blo 1f
+	/* if we were running out of virtual mapped space, disable mmu */
+	mov	r2, #0
+	mov     r1, #(CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE)
+	mcr     15, 0, r1, c1, c0, 0
+	mcrne   15, 0, r2, c8, c7, 0    /* nail I+D TLB on ARMv4 and greater */
+	
+1:
+	add pc, r4, r0
+
+Lcopy_size:	.word _edata-_C_LABEL(moko_start)
+Lstart_off:	.word moko_start_ram-_C_LABEL(moko_start)
+
+moko_start_ram:	
+	/*
+	 *  Kernel is loaded in SDRAM (0xa0200000..), and is expected to run
+	 *  in VA 0xc0200000..  
+	 */
+
+	mrc	p15, 0, r0, c2, c0, 0		/* get ttb prepared by redboot */
+	adr	r4, mmu_init_table2
+	
+#define BUILD_STARTUP_PAGETABLE
+#ifdef BUILD_STARTUP_PAGETABLE
+	mrc	p15, 0, r2, c1, c0, 0
+	mov	r2, #0
+	tst	r2, #CPU_CONTROL_MMU_ENABLE		/* we already have a page table? */
+	bne	3f
+
+	/* build page table from scratch */
+	ldr	r0, Lstartup_pagetable
+	adr	r4, mmu_init_table
+	b	3f
+
+2:
+	str	r3, [r0, r2]
+	add	r2, r2, #4
+	add	r3, r3, #(L1_S_SIZE)
+	adds	r1, r1, #-1
+	bhi	2b
+3:	
+	ldmia	r4!, {r1,r2,r3}   /* # of sections, PA|attr, VA */
+	cmp	r1, #0
+	bne	2b	
+#endif
+
+	mcr	p15, 0, r0, c2, c0, 0	/* Set TTB */
+	mcr	p15, 0, r0, c8, c7, 0	/* Flush TLB */
+
+	/* Set the Domain Access register.  Very important! */
+        mov     r0, #((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT)
+	mcr	p15, 0, r0, c3, c0, 0
+
+	/* Enable MMU */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #CPU_CONTROL_MMU_ENABLE
+	mcr	p15, 0, r0, c1, c0, 0
+	CPWAIT(r0)
+
+	/* Jump to kernel code in TRUE VA */
+	adr	r0, Lstart
+	ldr	pc, [r0]
+
+Lstart:
+	.word	start
+
+#define MMU_INIT(va,pa,n_sec,attr) \
+	.word	n_sec					    ; \
+	.word	4*((va)>>L1_S_SHIFT)			    ; \
+	.word	(pa)|(attr)				    ;
+	
+#ifdef BUILD_STARTUP_PAGETABLE
+#ifndef STARTUP_PAGETABLE_ADDR
+#define STARTUP_PAGETABLE_ADDR SDRAM_START+0x4000
+#endif
+Lstartup_pagetable:	.word	STARTUP_PAGETABLE_ADDR
+mmu_init_table:	
+	/* fill all table VA==PA */
+	MMU_INIT(0x00000000, 0x00000000, 1<<(32-L1_S_SHIFT), L1_TYPE_S|L1_S_AP(AP_KRW))
+	/* map SDRAM VA==PA, WT cacheable */
+	MMU_INIT(SDRAM_START, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))
+#endif
+mmu_init_table2:	
+	/* map VA 0xc0000000..0xc3ffffff to PA 0xa0000000..0xa3ffffff */
+	MMU_INIT(0xc0000000, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))
+
+	.word 0	/* end of table */