INSTALL kernel was just used by netbsd1.1 for their release..

1 files changed, 0 insertions, 221 deletions

diff --git a/sys/arch/amiga/conf/INSTALL b/sys/arch/amiga/conf/INSTALL
deleted file mode 100644
index 00f6be5cc5e..00000000000
--- a/sys/arch/amiga/conf/INSTALL
+++ /dev/null
@@ -1,221 +0,0 @@
-#	$NetBSD: INSTALL,v 1.1.2.1 1995/11/24 18:56:13 chopps Exp $
-
-#
-# GENERIC AMIGA
-#
-# This configuration file contains all possible options
-#
-
-include "std.amiga"
-
-maxusers	8
-options		TIMEZONE=300, DST=1
-
-#
-# processors this kernel should support
-#
-options		"M68040"	# support for 040
-options		FPSP		# MC68040 floating point support
-options		"M68030"	# support for 030
-options		"M68020"	# support for 020/851
-options		FPCOPROC	# Support for MC6888[12] (Required)
-
-options		SWAPPAGER	# Pager for processes (Required)
-options		VNODEPAGER	# Pager for vnodes (Required)
-options		DEVPAGER	# Pager for devices (Required)
-
-#
-# Networking options
-#
-options		INET		# IP networking support (Required)
-#options	ISO		# ISO Networking support
-#options	TPIP		# ARGO TP networking support
-#options	CCITT		# CCITT X.25
-#options	NS		# Xerox XNS
-#options	EON		# ISO CLNL over IP
-#options	GATEWAY		# Packet forwarding
-#options	DIRECTED_BROADCAST	# Broadcast across subnets
-#options	NSIP		# XNS over IP
-
-#
-# File system related options
-#
-options		QUOTA		# Disk quotas for local disks
-options		NFSSERVER	# Network File System server side code
-options		NFSCLIENT	# Network File System client side code
-
-#
-# File systems
-#
-options		FFS		# Berkeley fast file system
-options		MFS		# Memory based filesystem
-options		PROCFS		# Process filesystem
-options		KERNFS		# Kernel parameter filesystem (Recommended)
-options		FDESC		# /dev/fd filesystem
-options		NULLFS		# Loopback filesystem
-options		FIFO		# FIFO operations on vnodes (Recommended)
-options		ADOSFS		# AmigaDOS file system
-options		"CD9660"	# ISO 9660 file system, with Rock Ridge
-#options	PORTAL		# Portal filesystem
-#options	MSDOSFS		# MS-DOS filesystem
-
-
-#
-# Compatability options for various existing systems
-#
-options		"COMPAT_10"	# compatability with older NetBSD release
-options		"COMPAT_09"	# compatability with older NetBSD release
-options		"COMPAT_43"	# 4.3 BSD compatible system calls
-#options		COMPAT_SUNOS	# Support to run Sun (m68k) executables
-options		"TCP_COMPAT_42"	# Use 4.2 BSD style TCP
-options		"COMPAT_NOMID"	# allow nonvalid machine id executables
-#options	COMPAT_HPUX	# HP300 compatability
-
-#
-# Support for System V IPC facilities.
-#
-options		SYSVSHM		# System V-like shared memory
-options		SYSVMSG		# System V-like messages
-options		SYSVSEM		# System V-like semaphores
-
-#
-# Support for various kernel options
-#
-options		GENERIC		# Mini-root boot support
-options		LKM		# Loadable kernel modules
-options		KTRACE		# Add kernel tracing system call
-options		DIAGNOSTIC	# Add additional error checking code
-options		"NKMEMCLUSTERS=256"	# Size of kernel malloc area
-
-#
-# Misc. debuging options
-#
-options		PANICWAIT	# Require keystroke to dump/reboot
-#options	DEBUG		# Add debugging statements
-#options		DDB		# Kernel debugger
-#options	SYSCALL_DEBUG	# debug all syscalls.
-#options	SCSIDEBUG	# Add SCSI debugging statements
-#options	KGDB		# Kernel debugger (KGDB) support
-#options	PANICBUTTON	# Forced crash via keypress (???)
-
-#
-# Amiga specific options
-#
-options		MACHINE_NONCONTIG # Non-contiguous memory support
-
-options		RETINACONSOLE	# enable code to allow retina to be console
-options		ULOWELLCONSOLE	# enable code to allow a2410 to be console
-options         CL5426CONSOLE   # Cirrus console
-
-options		GRF_ECS		# Enhanced Chip Set
-options		GRF_NTSC	# NTSC
-options		GRF_PAL		# PAL
-options		"GRF_A2024"	# Support for the A2024
-options		GRF_AGA		# AGA Chip Set
-options		GRF_CL5426	# Cirrus board support
-#options	"KFONT_8X11"	# 8x11 font
-
-# This is how you would tell the kernel the A2410 oscillator frequencies:
-# The used frequencies are the defaults, and don't need option setting
-#options	"ULOWELL_OSC1=36000000"
-#options	"ULOWELL_OSC2=66667000"
-
-# This is how you specify the blitting speed, higher values may speed up blits
-# a littel bit.  If you raise this value too much some trash may appear.
-# the commented version is the default.
-#options	RH_MEMCLK 61000000
-# this option enables the 64 bit sprite which doesn't seems to be work
-# for quite a few people.  E.g. The cursor sprite will turn to a block
-# when moved to the top of the screen in X.
-#options	RH_64BIT_SPRITE
-# enables fast scroll code appears to now work on 040 systems.
-#options	RETINA_SPEED_HACK
-
-grfcc0		at mainbus0		# custom chips
-grfrt0		at zbus0		# retina II
-grfrh0		at zbus0		# retina III
-grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
-grful0		at zbus0		# A2410
-grfcv0		at zbus0		# CyverVision 64
-
-grf0		at grfcc0
-grf1		at grfrt0
-grf2		at grfrh0
-grf3		at grfcl?
-grf4		at grful0
-grf5		at grfcv0
-
-ite0		at grf0			# terminal emulators for grf's
-ite1		at grf1			# terminal emulators for grf's
-ite2		at grf2			# terminal emulators for grf's
-ite3		at grf3			# terminal emulators for grf's
-ite4		at grf4			# terminal emulators for grf's
-
-msc0		at zbus0		# A2232 MSC multiport serial.
-mfc0		at zbus0		# MultiFaceCard I/O board
-mfcs0		at mfc0 unit 0		# MFC serial
-mfcs1		at mfc0 unit 1		# MFC serial
-#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
-#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
-#mfcs2		at mfc1 unit 0
-#mfcs3		at mfc1 unit 1
-#mfcp1		at mfc1 unit 0
-
-le0		at zbus0		# Lance ethernet.
-ed0		at zbus0		# dp8390 ethernet
-es0		at zbus0		# SMC 91C90 ethernet
-qn0		at zbus0		# quicknet ethernet
-ae0		at zbus0		# Ariadne ethernet
-bah0		at zbus0		# C= arcnet
-
-
-# scsi stuff, all possible
-gvpbus*		at zbus0
-gtsc0		at gvpbus?		# GVP series II scsi
-ahsc0		at mainbus0		# A3000 scsi
-atzsc0		at zbus0
-wstsc0		at zbus0		# Wordsync II scsi
-ivsc0		at zbus0		# IVS scsi
-mlhsc0		at zbus0		# Hacker scsi
-otgsc0		at zbus0		# 12 gauge scsi
-zssc0		at zbus0		# Zeus scsi
-mgnsc0		at zbus0		# Magnum scsi
-wesc0		at zbus0		# Warp Engine scsi
-idesc0		at mainbus0		# A4000 & A1200 IDE
-afsc0		at zbus0		# A4091 scsi
-aftsc0		at mainbus0		# A4000T scsi
-flsc0		at zbus0		# FastlaneZ3 scsi
-bzsc0		at zbus0		# Blizzard 1230 scsi
-
-scsibus*	at gtsc0
-scsibus*	at ahsc0
-scsibus*	at atzsc0
-scsibus*	at wstsc0
-scsibus*	at ivsc0
-scsibus*	at mlhsc0
-scsibus*	at otgsc0
-scsibus*	at zssc0
-scsibus*	at mgnsc0
-scsibus*	at wesc0
-scsibus*	at idesc0
-scsibus*	at afsc0
-scsibus*	at aftsc0
-scsibus*	at flsc0
-scsibus*	at bzsc0
-
-# each hard drive from low target to high
-# will configure to the next available sd unit number
-sd*	at scsibus? target ? lun ?	# scsi disks
-
-st*	at scsibus? target ? lun ?	# scsi tapes
-cd*	at scsibus? target ? lun ?	# scsi cd's
-
-pseudo-device	sl			# slip
-pseudo-device	ppp			# ppp
-pseudo-device	view 10			# views
-pseudo-device	pty 16			# pseudo terminals
-pseudo-device	loop			# network loopback
-#pseudo-device	bpfilter 2		# berkeley packet filters
-#pseudo-device	tun 2
-
-config	netbsd swap on generic