no vmunix here, kernel is /bsd, os is OpenBSD!

4 files changed, 22 insertions, 22 deletions

diff --git a/sbin/reboot/boot_mac68k.8 b/sbin/reboot/boot_mac68k.8
index 62afed73e64..87d30d3b89c 100644
--- a/sbin/reboot/boot_mac68k.8
+++ b/sbin/reboot/boot_mac68k.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_mac68k.8,v 1.3 1996/06/29 18:24:17 mickey Exp $
+.\"	$OpenBSD: boot_mac68k.8,v 1.4 1996/07/10 03:52:55 ccappuc Exp $
 .\"	$NetBSD: boot_mac68k.8,v 1.1 1995/07/02 02:09:52 briggs Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -49,7 +49,7 @@ system bootstrapping procedures
 .Sh DESCRIPTION
 .Sy Power fail and crash recovery.
 Normally, the
-.Tn NetBSD
+.Tn OpenBSD
 kernel on the mac68k architecture is booted from the native operating
 system by means of an application program.  When the kernel takes over,
 it initializes itself and proceeds to boot the system.  An automatic
@@ -71,10 +71,10 @@ or not), the system will attempt a reboot.
 On most mac68k machines with "soft-power" after the IIcx, the power
 switch can be physically rotated and locked in the 'on' position.
 The native OS can be configured to automatically start the
-.Tn NetBSD
-boot program.  Additionally, the NetBSD boot program can be configured
+.Tn OpenBSD
+boot program.  Additionally, the OpenBSD boot program can be configured
 to boot
-.Tn NetBSD
+.Tn OpenBSD
 without intervention.  When a system is so configured, it can crash
 or lose power and reboot back to a fully multi-user state without
 any intervention.
@@ -105,12 +105,12 @@ respectively) may be used for this.
 .Pp
 It is sometimes useful to boot a kernel that resides in a folder
 in native OS rather than from the usual location in the
-.Tn NetBSD
+.Tn OpenBSD
 file system.  A radio button is supplied for this purpose.  Note that
 some programs will not run properly if the kernel is not found as
 .Ar /bsd
 within the 
-.Tn NetBSD
+.Tn OpenBSD
 file system.
 .Sh FILES
 .Bl -tag -width /bsd -compact
diff --git a/sbin/reboot/boot_pmax.8 b/sbin/reboot/boot_pmax.8
index a18aa238af4..d01336dc4e7 100644
--- a/sbin/reboot/boot_pmax.8
+++ b/sbin/reboot/boot_pmax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_pmax.8,v 1.3 1996/06/29 18:24:18 mickey Exp $
+.\"	$OpenBSD: boot_pmax.8,v 1.4 1996/07/10 03:52:56 ccappuc Exp $
 .\"	$NetBSD: boot_pmax.8,v 1.1 1995/04/25 23:55:11 mellon Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -45,7 +45,7 @@
 system bootstrapping procedures
 .Sh DESCRIPTION
 The
-.Tn NetBSD
+.Tn OpenBSD
 kernel is started by placing it at the beginning of physical memory
 and transferring to the entry point.
 Since the system is not reenterable,
@@ -97,10 +97,10 @@ For automatic boots, the ROM automatically passes a
 .Fl a
 argument to the boot
 loader, requesting that
-.Tn NetBSD
+.Tn OpenBSD
 attempt to come up to multi-user mode.   At the boot ROM prompt,
 the user may boot
-.Tn NetBSD
+.Tn OpenBSD
 with either the
 .Nm auto
 or the
@@ -113,7 +113,7 @@ argument is passed to the kernel, requesting a multi-user boot; otherwise
 the
 .Fl s
 argument is passed, requesting that
-.Tn NetBSD
+.Tn OpenBSD
 boot to single user mode.
 .Pp
 When either the
@@ -163,7 +163,7 @@ devices, the option-specific protocol identifier is either mop or tftp.
 Filename requirements are as for the DECstation 2100 and 3100.
 .Pp
 To start
-.Tn NetBSD
+.Tn OpenBSD
 from the boot prompt, the
 .Nm boot
 command must be used.   With no arguments, this simply boots the default
diff --git a/sbin/reboot/boot_sparc.8 b/sbin/reboot/boot_sparc.8
index 009c4bf5c4d..b4dbf39afac 100644
--- a/sbin/reboot/boot_sparc.8
+++ b/sbin/reboot/boot_sparc.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sparc.8,v 1.3 1996/06/29 18:24:19 mickey Exp $
+.\"	$OpenBSD: boot_sparc.8,v 1.4 1996/07/10 03:52:56 ccappuc Exp $
 .\"	$NetBSD: boot_sparc.8,v 1.4 1995/04/25 11:37:25 pk Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -89,9 +89,9 @@ incantation in new-mode to force the rom to always start in new-mode.
 .Pa \	ok
 setenv sunmon-compat? false
 .Pp
-The rom will normally load the kernel from "sd(0,0,0)vmunix". To change the
+The rom will normally load the kernel from "sd(0,0,0)bsd". To change the
 default so that
-.Pa NetBSD
+.Pa OpenBSD
 will be loaded type the following
 .Pp
 .Pa \	ok
diff --git a/sbin/reboot/boot_x68k.8 b/sbin/reboot/boot_x68k.8
index faf32d2f418..5e3b32594d0 100644
--- a/sbin/reboot/boot_x68k.8
+++ b/sbin/reboot/boot_x68k.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_x68k.8,v 1.3 1996/06/29 18:24:22 mickey Exp $
+.\"	$OpenBSD: boot_x68k.8,v 1.4 1996/07/10 03:52:56 ccappuc Exp $
 .\"	$NetBSD: boot_x68k.8,v 1.1 1996/06/15 18:54:22 oki Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -54,14 +54,14 @@ battery-backuped SRAM.
 By default, the boot rom attempt to boot from
 floppy disk drive (from 0 to 3) first,
 and then attempt to boot from hard disk (SASI or SCSI).
-On the NetBSD/X68k, booting from partition A of SCSI disks (sd?a) 
+On the OpenBSD/X68k, booting from partition A of SCSI disks (sd?a) 
 and 2HD floppy disks (fd?a, fd?c) is currently supported.
 .Pp
 First, the initial program loader of IOCS ROM or SCSI disk
 (or equivalent) reads
 .Pa boot
 program at the top of the disk,
-and then the boot program loads the NetBSD kernel
+and then the boot program loads the OpenBSD kernel
 .Pa /bsd
 which is in the same partition of the disk.
 If you press
@@ -82,15 +82,15 @@ flag and tries to boot the system in debug mode; see
 for details.
 .Pp
 Note for X68030+MC68030 systems:
-Nothing special to be attended to; you can boot NetBSD just like as
+Nothing special to be attended to; you can boot OpenBSD just like as
 other operating systems such as Human68k and OS-9.
 .Pp
 Note for X68030/040turbo(68040 accelerator by BEEPs) systems:
-NetBSD can boot under 040 mode.
+OpenBSD can boot under 040 mode.
 It can also boot under 030 mode if you have MC68030 on the board.
 .Pp
 Note for X68000/Xellent30(68030 accelerator by TSR)+MC68030 systems:
-In order to boot NetBSD, you must choose 030 mode by using
+In order to boot OpenBSD, you must choose 030 mode by using
 .Pa CH30.SYS ,
 which must reside in the battery-backuped SRAM.
 .Pp