virtual terimals' name become ttyC*

4 files changed, 10 insertions, 10 deletions

diff --git a/sys/arch/i386/isa/pcvt/Util/kcon/Makefile b/sys/arch/i386/isa/pcvt/Util/kcon/Makefile
index 4826870f5b9..6504fa84208 100644
--- a/sys/arch/i386/isa/pcvt/Util/kcon/Makefile
+++ b/sys/arch/i386/isa/pcvt/Util/kcon/Makefile
@@ -1,5 +1,5 @@
 PROG=		kcon
-DEVICE=		/dev/ttyv0
+DEVICE=		/dev/ttyC0
 CFLAGS+= 	-I${.CURDIR}/../keycap -DKEYB_DEVICE=\"${DEVICE}\"
 
 # the -Lfoo could be omitted if libkeycap.a were installed before
diff --git a/sys/arch/i386/isa/pcvt/Util/mcon/mcon.1 b/sys/arch/i386/isa/pcvt/Util/mcon/mcon.1
index 088399c2359..2b8ef5544a4 100644
--- a/sys/arch/i386/isa/pcvt/Util/mcon/mcon.1
+++ b/sys/arch/i386/isa/pcvt/Util/mcon/mcon.1
@@ -68,11 +68,11 @@ driver not being used as a virtual terminal device. E.\ g., if you
 have configured eight virtual terminals
 .Pq the default value ,
 named
-.Pa /dev/ttyv0
+.Pa /dev/ttyC0
 through
-.Pa /dev/ttyv7 ,
+.Pa /dev/ttyC7 ,
 the mouse emulator would allocate
-.Pa /dev/ttyv8 .
+.Pa /dev/ttyC8 .
 
 If
 .Nm
@@ -139,7 +139,7 @@ mouse emulator:
 .Fl r Ar f3
 .Fl a Ar 250
 .Fl s Ar \&no
-.Pa /dev/ttyv8
+.Pa /dev/ttyC8
 .Sh BUGS
 The key names used to map the button-emulating keys to scan codes
 .Pq and vica verse
diff --git a/sys/arch/i386/isa/pcvt/Util/pcvtdoc/pcvt.4 b/sys/arch/i386/isa/pcvt/Util/pcvtdoc/pcvt.4
index e3ac67b7c14..8b9753a5bc8 100644
--- a/sys/arch/i386/isa/pcvt/Util/pcvtdoc/pcvt.4
+++ b/sys/arch/i386/isa/pcvt/Util/pcvtdoc/pcvt.4
@@ -484,11 +484,11 @@ fakes a three-button mouse using the Mouse Systems protocol. The first
 .Nm pcvt
 device node not used by a virtual screen is the mouse device. I.\& e.,
 for the default value of 8 virtual screens,
-.Pa /dev/ttyv0
+.Pa /dev/ttyC0
 through
-.Pa /dev/ttyv7
+.Pa /dev/ttyC7
 would refer to the virtual screens, and
-.Pa /dev/ttyv8
+.Pa /dev/ttyC8
 were the mouse emulator device. The mouse emulation is turned on by
 pressing the
 .Aq Em NumLock
@@ -814,7 +814,7 @@ for their documentation.
 Definitions for
 .Xr ioctl 2
 function calls
-.It Pa /dev/ttyv?
+.It Pa /dev/ttyC?
 .It Pa /dev/console
 Device nodes to access the
 .Nm pcvt
diff --git a/sys/arch/i386/isa/pcvt/Util/scon/scon.1 b/sys/arch/i386/isa/pcvt/Util/scon/scon.1
index d99802b2975..07752289719 100644
--- a/sys/arch/i386/isa/pcvt/Util/scon/scon.1
+++ b/sys/arch/i386/isa/pcvt/Util/scon/scon.1
@@ -84,7 +84,7 @@ returned could be MDA, HGC, CGA, EGA, VGA or UNKNOWN.
 Specify the screen number the current (displayed) screen should be switched 
 to.
 .It Fl d
-Specify the device filename (i.e. /dev/ttyv2) further operations specified on 
+Specify the device filename (i.e. /dev/ttyC2) further operations specified on 
 the command line should be applied to.
 .It Fl f
 Some programs which silently assume 24 lines when they run on a VT220 show