kernel image is bsd, not netbsd.

9 files changed, 47 insertions, 47 deletions

diff --git a/sbin/reboot/boot_hp300.8 b/sbin/reboot/boot_hp300.8
index 67b34d60388..cebb5e64a23 100644
--- a/sbin/reboot/boot_hp300.8
+++ b/sbin/reboot/boot_hp300.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_hp300.8,v 1.2 1996/06/23 14:32:06 deraadt Exp $
+.\"	$OpenBSD: boot_hp300.8,v 1.3 1996/06/29 18:24:15 mickey Exp $
 .\"	$NetBSD: boot_hp300.8,v 1.3 1995/04/23 10:33:34 cgd Exp $
 .\"
 .\" Copyright (c) 1990, 1991, 1993
@@ -67,7 +67,7 @@ This
 .Em boot
 program
 finds the corresponding file on the given device 
-.Pf ( Ar netbsd
+.Pf ( Ar bsd
 by default),
 loads that file into memory,
 and starts the program at the entry address specified in the program header.
@@ -97,7 +97,7 @@ specifiers.
 For example,
 to boot from the `a' file system of unit 0 on HP-IB 2,
 type
-.Ql rd(16, 0)netbsd
+.Ql rd(16, 0)bsd
 to the boot prompt.
 For tapes, the minor device number gives a file offset.
 .Pp
@@ -106,7 +106,7 @@ In an emergency, the bootstrap methods described in the paper
 can be used to boot from a distribution tape.
 .Sh FILES
 .Bl -tag -width /usr/mdec/installboot -compact
-.It Pa /netbsd
+.It Pa /bsd
 system code
 .It Pa /usr/mdec/bootrd
 .Tn LIF
diff --git a/sbin/reboot/boot_i386.8 b/sbin/reboot/boot_i386.8
index c613f957f84..824bde85e06 100644
--- a/sbin/reboot/boot_i386.8
+++ b/sbin/reboot/boot_i386.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_i386.8,v 1.2 1996/06/23 14:32:07 deraadt Exp $
+.\"	$OpenBSD: boot_i386.8,v 1.3 1996/06/29 18:24:17 mickey Exp $
 .\"	$NetBSD: boot_i386.8,v 1.3 1995/04/23 10:33:35 cgd Exp $
 .\"
 .\" Copyright (c) 1991, 1993
@@ -57,7 +57,7 @@ clones attempt to boot the floppy disk drive A (otherwise known as drive
 0) first, and failing that, attempt to boot the hard disk C (otherwise
 known as hard disk controller 1, drive 0).
 The automatic boot will attempt to load
-.Pa netbsd
+.Pa bsd
 from partition A of either the floppy or the hard disk.
 This boot may be aborted by typing any character on the keyboard repeatedly
 (four or five times at least) during the operating system load phase, after
@@ -102,9 +102,9 @@ fd	5 1/4" or 3 1/2" High density floppies
 For example,
 to boot from a file system which starts at cylinder 0
 of unit 0 of an IDE disk, type
-.Dq Li wd0a:netbsd
+.Dq Li wd0a:bsd
 to the boot prompt;
-.Dq Li fd0a:netbsd
+.Dq Li fd0a:bsd
 would specify a 3 1/2" floppy drive 0 .
 .Pp
 In an emergency, the bootstrap methods described in the paper
@@ -112,8 +112,8 @@ In an emergency, the bootstrap methods described in the paper
 can be used
 to boot from a distribution tape.
 .Sh FILES
-.Bl -tag -width /netbsdxx -compact
-.It Pa /netbsd
+.Bl -tag -width /bsdxx -compact
+.It Pa /bsd
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_mac68k.8 b/sbin/reboot/boot_mac68k.8
index 577f2350e16..62afed73e64 100644
--- a/sbin/reboot/boot_mac68k.8
+++ b/sbin/reboot/boot_mac68k.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_mac68k.8,v 1.2 1996/06/23 14:32:07 deraadt Exp $
+.\"	$OpenBSD: boot_mac68k.8,v 1.3 1996/06/29 18:24:17 mickey Exp $
 .\"	$NetBSD: boot_mac68k.8,v 1.1 1995/07/02 02:09:52 briggs Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -85,7 +85,7 @@ dialog where booting preferences may be changed and an option whereby
 these options may be saved.  The preferences are stored in the program
 itself, not in a preferences folder--thus allowing two separate copies
 of the program to be configured differently (e.g. to boot different
-netbsd or netbsd.test, or to boot from two different drives).
+bsd or bsd.test, or to boot from two different drives).
 .Pp
 One option that may be specified is a boot to single-user mode.  This
 stops the boot process very early on and allows system maintenence.
@@ -108,13 +108,13 @@ in native OS rather than from the usual location in the
 .Tn NetBSD
 file system.  A radio button is supplied for this purpose.  Note that
 some programs will not run properly if the kernel is not found as
-.Ar /netbsd
+.Ar /bsd
 within the 
 .Tn NetBSD
 file system.
 .Sh FILES
-.Bl -tag -width /netbsd -compact
-.It Pa /netbsd
+.Bl -tag -width /bsd -compact
+.It Pa /bsd
 system kernel
 .El
 .Sh SEE ALSO
diff --git a/sbin/reboot/boot_pmax.8 b/sbin/reboot/boot_pmax.8
index 7828cd0ef7c..a18aa238af4 100644
--- a/sbin/reboot/boot_pmax.8
+++ b/sbin/reboot/boot_pmax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_pmax.8,v 1.2 1996/06/23 14:32:08 deraadt Exp $
+.\"	$OpenBSD: boot_pmax.8,v 1.3 1996/06/29 18:24:18 mickey Exp $
 .\"	$NetBSD: boot_pmax.8,v 1.1 1995/04/25 23:55:11 mellon Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -84,13 +84,13 @@ these cases the network protocol can be used to determine which
 file to boot.  When booting off the tape, no filename should be
 specified, and when booting off of disk, the filename of a kernel
 must be specified.  Generally, the kernel is named
-.Nm netbsd.
+.Nm bsd.
 .Pp
 An example bootpath setting would be:
 .nf
 .sp 1
 .ce 1
-setenv bootpath rz(0,1,0)netbsd
+setenv bootpath rz(0,1,0)bsd
 .fi
 .Pp
 For automatic boots, the ROM automatically passes a
@@ -128,7 +128,7 @@ flag, followed by the path of the kernel to boot, as described above.
 For example:
 .sp 1
 .ce 1
-boot -f rz(0,4,0)netbsd.new
+boot -f rz(0,4,0)bsd.new
 .Pp
 On TurboChannel machines (all DECstation 5000 models), the boot path
 is specified in the boot environment variable, along with any arguments
@@ -141,7 +141,7 @@ must be enclosed in quotes.   For example:
 .nf
 .sp 1
 .ce 1
-setenv boot "3/rz4/netbsd -a"
+setenv boot "3/rz4/bsd -a"
 .fi
 .Pp
 The device from which to boot is specified as the TurboChannel slot
@@ -175,7 +175,7 @@ booted, the path of that kernel may be specified after the boot command as
 described above, and any arguments may be passed similarly.   For example:
 .sp 1
 .ce 1
-boot 3/rz4/netbsd.new -a
+boot 3/rz4/bsd.new -a
 .Sh SEE ALSO
 .Xr crash 8m ,
 .Xr fsck 8 ,
diff --git a/sbin/reboot/boot_sparc.8 b/sbin/reboot/boot_sparc.8
index 789015ce8b4..009c4bf5c4d 100644
--- a/sbin/reboot/boot_sparc.8
+++ b/sbin/reboot/boot_sparc.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sparc.8,v 1.2 1996/06/23 14:32:09 deraadt Exp $
+.\"	$OpenBSD: boot_sparc.8,v 1.3 1996/06/29 18:24:19 mickey Exp $
 .\"	$NetBSD: boot_sparc.8,v 1.4 1995/04/25 11:37:25 pk Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -58,7 +58,7 @@ and unless this fails, the system will resume multi-user operations.
 The SPARC system currently uses the SunOS bootstrap loaders.
 This will be changed in a future version of the system.
 The SunOS boot will attempt to load
-.Pa netbsd
+.Pa bsd
 from partition A of the boot device,
 which must currently be an ``sd'' disk.
 .Pp
@@ -95,7 +95,7 @@ default so that
 will be loaded type the following
 .Pp
 .Pa \	ok
-setenv boot-from sd(0,0,0)netbsd
+setenv boot-from sd(0,0,0)bsd
 .Pp
 At any time you can break back to the rom by pressing the `L1' and `a'
 keys at the same time (if the console is a serial port the same is
@@ -104,8 +104,8 @@ If you do this accidentally you can continue whatever was in progress
 by typing `go'.
 .Pp
 .Sh FILES
-.Bl -tag -width /netbsdxx -compact
-.It Pa /netbsd
+.Bl -tag -width /bsdxx -compact
+.It Pa /bsd
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_sun3.8 b/sbin/reboot/boot_sun3.8
index b1c96de476f..146a5e79660 100644
--- a/sbin/reboot/boot_sun3.8
+++ b/sbin/reboot/boot_sun3.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sun3.8,v 1.2 1996/06/23 14:32:09 deraadt Exp $
+.\"	$OpenBSD: boot_sun3.8,v 1.3 1996/06/29 18:24:20 mickey Exp $
 .\"	$NetBSD: boot_sun3.8,v 1.1 1995/08/08 20:46:20 gwr Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -56,11 +56,11 @@ and unless this fails, the system will resume multi-user operations.
 .Pp
 .Sy Cold starts
 A disk-boot program (/usr/mdec/ufsboot) will attempt to load
-.Pa netbsd
+.Pa bsd
 from partition A of the boot device,
 which must currently be an ``sd'' disk.
 Alternatively, network boot program (/usr/mdec/netboot) will load
-.Pa netbsd
+.Pa bsd
 from the NFS root as determined by the procedure described in
 .Xr diskless 8 .
 .Pp
@@ -86,7 +86,7 @@ by typing `c' followed by the return key.
 .Pp
 .Sh FILES
 .Bl -tag -width /usr/mdec/installboot -compact
-.It Pa /netbsd
+.It Pa /bsd
 system code
 .It Pa /usr/mdec/bootxx
 first-level boot block for disks
diff --git a/sbin/reboot/boot_tahoe.8 b/sbin/reboot/boot_tahoe.8
index c7db54d0c2a..55e3fed9dd8 100644
--- a/sbin/reboot/boot_tahoe.8
+++ b/sbin/reboot/boot_tahoe.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_tahoe.8,v 1.2 1996/06/23 14:32:10 deraadt Exp $
+.\"	$OpenBSD: boot_tahoe.8,v 1.3 1996/06/29 18:24:20 mickey Exp $
 .\"	$NetBSD: boot_tahoe.8,v 1.3 1995/04/23 10:33:38 cgd Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -125,9 +125,9 @@ to boot from a file system which starts at cylinder 0
 of unit 0 of an
 .Tn SMD-E
 disk, type
-.Ql dk(0,0)netbsd
+.Ql dk(0,0)bsd
 to the boot prompt;
-.Ql dk(2,1,0)netbsd
+.Ql dk(2,1,0)bsd
 would specify drive 1 on
 .Tn SMD-E
 controller 2.
@@ -137,8 +137,8 @@ In an emergency, the bootstrap methods described in the paper
 can be used
 to boot from a distribution tape.
 .Sh FILES
-.Bl -tag -width /netbsd -compact
-.It Pa /netbsd
+.Bl -tag -width /bsd -compact
+.It Pa /bsd
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_vax.8 b/sbin/reboot/boot_vax.8
index 4853e016877..0067420ab3f 100644
--- a/sbin/reboot/boot_vax.8
+++ b/sbin/reboot/boot_vax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_vax.8,v 1.2 1996/06/23 14:32:10 deraadt Exp $
+.\"	$OpenBSD: boot_vax.8,v 1.3 1996/06/29 18:24:21 mickey Exp $
 .\"	$NetBSD: boot_vax.8,v 1.3 1995/04/23 10:33:39 cgd Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -202,7 +202,7 @@ On any processor, the
 .Em boot
 program
 finds the corresponding file on the given device 
-.Pf ( Pa netbsd
+.Pf ( Pa bsd
 by default), loads that file
 into memory location zero, and starts the program at the entry address
 specified in the program header (after clearing off the high bit
@@ -260,26 +260,26 @@ to boot from a file system which starts at cylinder 0
 of unit 0 of a
 .Tn MASSBUS
 disk, type
-.Ql hp(0,0)netbsd
+.Ql hp(0,0)bsd
 to the boot prompt;
-.Ql hp(2,0,1,0)netbsd
+.Ql hp(2,0,1,0)bsd
 would specify drive 1 on
 .Tn MASSBUS
 adaptor 2;
-.Ql up(0,0)netbsd
+.Ql up(0,0)bsd
 would specify a
 .Tn UNIBUS
 drive,
-.Ql hk(0,0)netbsd
+.Ql hk(0,0)bsd
 would specify
 an RK07 disk drive,
-.Ql ra(1,0,0,0)netbsd
+.Ql ra(1,0,0,0)bsd
 would specify a
 .Tn UDA50
 disk drive on a second
 .Tn UNIBUS ,
 and
-.Ql rb(0,0)netbsd
+.Ql rb(0,0)bsd
 would specify a
 disk on a 730
 .Tn IDC .
@@ -302,7 +302,7 @@ In an emergency, the bootstrap methods described in the paper
 can be used to boot from a distribution tape.
 .Sh FILES
 .Bl -tag -width /usr/mdec/xxboot -compact
-.It Pa /netbsd
+.It Pa /bsd
 system code
 .It Pa /boot
 system bootstrap
diff --git a/sbin/reboot/boot_x68k.8 b/sbin/reboot/boot_x68k.8
index 103ecf391c3..faf32d2f418 100644
--- a/sbin/reboot/boot_x68k.8
+++ b/sbin/reboot/boot_x68k.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_x68k.8,v 1.2 1996/06/23 14:32:11 deraadt Exp $
+.\"	$OpenBSD: boot_x68k.8,v 1.3 1996/06/29 18:24:22 mickey Exp $
 .\"	$NetBSD: boot_x68k.8,v 1.1 1996/06/15 18:54:22 oki Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -62,7 +62,7 @@ First, the initial program loader of IOCS ROM or SCSI disk
 .Pa boot
 program at the top of the disk,
 and then the boot program loads the NetBSD kernel
-.Pa /netbsd
+.Pa /bsd
 which is in the same partition of the disk.
 If you press
 .Pa [SHIFT]
@@ -98,7 +98,7 @@ Note for X68000/Jupiter-X(68040/060 accelerator by FTZ-net) systems:
 The system must be in 040/060 processor mode.
 .Sh FILES
 .Bl -tag -width /usr/mdec/xxbootxx -compact
-.It Pa /netbsd
+.It Pa /bsd
 system code
 .It Pa /usr/mdec/xxboot
 boot program, xx is disk type