- fix tyops.

ok otto@

2 files changed, 8 insertions, 9 deletions

diff --git a/distrib/notes/loongson/install b/distrib/notes/loongson/install
index cf568b85eda..c5a959d198a 100644
--- a/distrib/notes/loongson/install
+++ b/distrib/notes/loongson/install
@@ -1,10 +1,10 @@
-dnl	$OpenBSD: install,v 1.2 2010/02/04 16:39:05 otto Exp $
+dnl	$OpenBSD: install,v 1.3 2010/02/04 21:32:11 jasper Exp $
 OpenBSDInstallPrelude
 
 Booting the installation media:
 
 The easiest way to boot into the OpenBSD installer is to copy the bsd.rd
-installation kernel to the main linux partition, and boot from it.
+installation kernel to the main Linux partition, and boot from it.
 
 Assuming the installation kernel has been copied to /boot/bsd.rd on the
 Linux system, at the PMON prompt, enter:
@@ -95,7 +95,7 @@ OpenBSDInstallWrapup
 
 	Note that using the boot menu currently disables root device
 	discovery and kernel symbol loading. Therefore it may be
-	more conventient to switch to the PMON prompt using 'c' and
+	more convenient to switch to the PMON prompt using 'c' and
 	boot with the command
 
 	PMON> boot -k $bsd
diff --git a/distrib/notes/loongson/prep b/distrib/notes/loongson/prep
index 967842323a6..430d7e18600 100644
--- a/distrib/notes/loongson/prep
+++ b/distrib/notes/loongson/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.1 2010/02/03 17:10:44 miod Exp $
+dnl	$OpenBSD: prep,v 1.2 2010/02/04 21:32:11 jasper Exp $
 Most MACHINE systems are shipped with a Linux system installed on the disk
 drive or SSD.  This system will likely use two partitions, one for the
 system and applications, and another for the user data. OpenBSD will in turn
@@ -12,16 +12,15 @@ If you intend to only use OpenBSD on your machine, please note that, at this
 point, it is necessary to keep an ext2 or ext3 Linux partition, to be able
 to boot the system.
 
-dnl
 Before you install your system, you should familiarize yourself with PMON,
 the open source firmware and bootloader of your machine.
 
 Entering PMON:
 dnl maybe lemote specific, does gdium use a boot menu too?
-    Upon powerup, or after a reset, a splash screen is displayed while PMON
+    Upon power-up, or after a reset, a splash screen is displayed while PMON
     initializes, and then a text mode boot menu appears.
 
-    At this menu, you can either select one of the sytems to boot with the
+    At this menu, you can either select one of the systems to boot with the
     arrows keys and press enter, or abort the countdown sequence and get to
     the PMON commandline by hitting `c'.
 
@@ -32,10 +31,10 @@ dnl maybe lemote specific, does gdium use a boot menu too?
 
 PMON file path concepts:
 
-    The filenames used by PMON always mention explicitely the location of
+    The filenames used by PMON always mention explicitly the location of
     the filesystem they refer to, as well as the filesystem type. They
     are constructed as
-    	/dev/fs/<filesystem type>@<device name>/<path wihtin the filesystem>
+    	/dev/fs/<filesystem type>@<device name>/<path within the filesystem>
 
 dnl On the Lemote Yeeloong,
     The internal storage (either a disk drive or an SSD) is `wd0'.