FreeBSD vs. OpenBSD-isms (Fx, configuration, etc)

4 files changed, 18 insertions, 18 deletions

diff --git a/share/man/man4/mx.4 b/share/man/man4/mx.4
index 9bd61d3304d..0a35ca5e018 100644
--- a/share/man/man4/mx.4
+++ b/share/man/man4/mx.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mx.4,v 1.1 1999/01/08 12:42:41 jason Exp $
+.\"	$OpenBSD: mx.4,v 1.2 1999/03/10 23:17:34 jason Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -66,9 +66,9 @@ driver supports the following media types:
 .It autoselect
 Enable autoselection of the media type and options.
 The user can manually override
-the autoselected mode by adding media options to the
-.Pa /etc/rc.conf
-fine.
+the autoselected mode by adding media options to the appropriate
+.Pa /etc/hostname.mxX
+file.
 .It 10baseT/UTP
 Set 10Mbps operation. The
 .Ar mediaopt
diff --git a/share/man/man4/pn.4 b/share/man/man4/pn.4
index 1af04a00f69..5e7952a2e22 100644
--- a/share/man/man4/pn.4
+++ b/share/man/man4/pn.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pn.4,v 1.2 1999/02/27 19:50:35 jason Exp $
+.\"	$OpenBSD: pn.4,v 1.3 1999/03/10 23:17:34 jason Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -69,9 +69,9 @@ driver supports the following media types:
 .It autoselect
 Enable autoselection of the media type and options.
 The user can manually override
-the autoselected mode by adding media options to the
-.Pa /etc/rc.conf
-fine.
+the autoselected mode by adding media options to the appropriate
+.Pa /etc/hostname.pnX
+file.
 .It 10baseT/UTP
 Set 10Mbps operation. The
 .Ar mediaopt
@@ -134,7 +134,7 @@ warm boot to have the device properly configured.
 .Pp
 Note that this condition only occurs when warm booting from another
 operating system. If you power down your system prior to booting
-.Fx ,
+.Ox ,
 the card should be configured correctly.
 .El
 .Sh SEE ALSO
diff --git a/share/man/man4/rl.4 b/share/man/man4/rl.4
index a656658908d..ce304d923a3 100644
--- a/share/man/man4/rl.4
+++ b/share/man/man4/rl.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: rl.4,v 1.4 1999/02/27 19:50:34 jason Exp $
+.\"	$OpenBSD: rl.4,v 1.5 1999/03/10 23:17:34 jason Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -76,9 +76,9 @@ driver supports the following media types:
 Enable autoselection of the media type and options. This is only
 supported if the PHY chip attached to the RealTek controller
 supports NWAY autonegotiation. The user can manually override
-the autoselected mode by adding media options to the
-.Pa /etc/rc.conf
-fine.
+the autoselected mode by adding media options to the appropriate
+.Pa /etc/hostname.rlX
+file.
 .It 10baseT/UTP
 Set 10Mbps operation. The
 .Ar mediaopt
diff --git a/share/man/man4/xl.4 b/share/man/man4/xl.4
index 9af1a5c0c17..50d2d62ef32 100644
--- a/share/man/man4/xl.4
+++ b/share/man/man4/xl.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: xl.4,v 1.6 1999/02/27 19:50:35 jason Exp $
+.\"	$OpenBSD: xl.4,v 1.7 1999/03/10 23:17:34 jason Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -82,9 +82,9 @@ Enable autoselection of the media type and options. Note that this
 option is only available with the 3c905 and 3c905B adapters with
 external PHYs or built-in autonegotiation logic. For 3c900 adapters,
 the driver will choose the mode specified in the EEPROM. The user can
-change this by adding media options to the
-.Pa /etc/rc.conf
-fine.
+change this by adding media options to the appropriate
+.Pa /etc/hostname.xlX
+file.
 .It 10baseT/UTP
 Set 10Mbps operation. The
 .Ar mediaopt
@@ -162,7 +162,7 @@ warm boot to have the device properly configured.
 .Pp
 Note that this condition only occurs when warm booting from another
 operating system. If you power down your system prior to booting
-.Fx ,
+.Ox ,
 the card should be configured correctly.
 .It "xl%d: WARNING: no media options bits set in the media options register!"
 This warning may appear when using the driver on some Dell Latitude