diff options
author | Damien Bergamini <damien@cvs.openbsd.org> | 2005-03-11 20:48:00 +0000 |
---|---|---|
committer | Damien Bergamini <damien@cvs.openbsd.org> | 2005-03-11 20:48:00 +0000 |
commit | 3294911624ad0ecef5cb811474d5484421548ecd (patch) | |
tree | 070d60a78c25104aea89139f30457a3bb833dc63 | |
parent | 5d5fb709666cad124bfaa4c552a654eef92c449f (diff) |
make use of the new ral_get_rts(), ral_txtime() and ral_setup_tx_desc()
functions. this makes RTS protection mode and 802.11g work.
-rw-r--r-- | sys/dev/ic/ral.c | 214 | ||||
-rw-r--r-- | sys/dev/ic/ralreg.h | 5 |
2 files changed, 84 insertions, 135 deletions
diff --git a/sys/dev/ic/ral.c b/sys/dev/ic/ral.c index 41ef378b4fc..9af73f39201 100644 --- a/sys/dev/ic/ral.c +++ b/sys/dev/ic/ral.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ral.c,v 1.31 2005/03/11 20:41:06 damien Exp $ */ +/* $OpenBSD: ral.c,v 1.32 2005/03/11 20:47:59 damien Exp $ */ /*- * Copyright (c) 2005 @@ -373,8 +373,8 @@ ral_attach(struct ral_softc *sc) /* set device capabilities */ ic->ic_caps = IEEE80211_C_MONITOR | IEEE80211_C_IBSS | - IEEE80211_C_SHPREAMBLE | IEEE80211_C_PMGT | IEEE80211_C_TXPMGT | - IEEE80211_C_WEP; + IEEE80211_C_HOSTAP | IEEE80211_C_SHPREAMBLE | IEEE80211_C_PMGT | + IEEE80211_C_TXPMGT | IEEE80211_C_WEP; if (sc->rf_rev == RAL_RF_5222) { /* set supported .11a rates */ @@ -1060,22 +1060,24 @@ ral_tx_intr(struct ral_softc *sc) switch (letoh32(desc->flags) & RAL_TX_RESULT_MASK) { case RAL_TX_SUCCESS: DPRINTFN(10, ("data frame sent successfully\n")); - ieee80211_rssadapt_raise_rate(ic, &rn->rssadapt, - &data->id); + if (data->id.id_node != NULL) { + ieee80211_rssadapt_raise_rate(ic, + &rn->rssadapt, &data->id); + } break; case RAL_TX_SUCCESS_RETRY: DPRINTFN(9, ("data frame sent after %u retries\n", (letoh32(desc->flags) >> 5) & 0x7)); - ieee80211_rssadapt_lower_rate(ic, data->ni, - &rn->rssadapt, &data->id); break; case RAL_TX_FAIL_RETRY: DPRINTFN(9, ("sending data frame failed (too much " "retries)\n")); - ieee80211_rssadapt_lower_rate(ic, data->ni, - &rn->rssadapt, &data->id); + if (data->id.id_node != NULL) { + ieee80211_rssadapt_lower_rate(ic, data->ni, + &rn->rssadapt, &data->id); + } break; case RAL_TX_FAIL_INVALID: @@ -1598,30 +1600,15 @@ ral_setup_tx_desc(struct ral_softc *sc, struct ral_tx_desc *desc, int ral_tx_bcn(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) { - struct ieee80211com *ic = &sc->sc_ic; - struct ifnet *ifp = &ic->ic_if; struct ral_tx_desc *desc; struct ral_tx_data *data; - struct ieee80211_frame *wh; - struct ieee80211_duration d0, dn; - int rate, npkt, error; + int rate, error; desc = &sc->bcnq.desc[sc->bcnq.cur]; data = &sc->bcnq.data[sc->bcnq.cur]; - wh = mtod(m0, struct ieee80211_frame *); - rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 4; - error = ieee80211_compute_duration(wh, m0->m_pkthdr.len, - ic->ic_flags & ~IEEE80211_F_WEPON, ic->ic_fragthreshold, rate, &d0, - &dn, &npkt, ifp->if_flags & IFF_DEBUG); - if (error != 0) { - printf("%s: could not compute duration\n", sc->sc_dev.dv_xname); - m_freem(m0); - return error; - } - error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); if (error != 0) { @@ -1634,22 +1621,9 @@ ral_tx_bcn(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) data->m = m0; data->ni = ni; - desc->physaddr = htole32(data->map->dm_segs->ds_addr); - - desc->flags = htole32(RAL_TX_VALID | RAL_TX_BUSY | - RAL_TX_INSERT_TIMESTAMP | RAL_TX_IFS_NEW_BACKOFF); - desc->flags |= htole32(m0->m_pkthdr.len << 16); - - desc->wme = htole32( - 8 << RAL_WME_CWMAX_BITS_SHIFT | - 3 << RAL_WME_CWMIN_BITS_SHIFT | - 2 << RAL_WME_AIFSN_BITS_SHIFT); - - desc->plcp_length = htole16(d0.d_plcp_len); - desc->plcp_service = 4; - desc->plcp_signal = ral_plcp_signal(rate); - if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) - desc->plcp_signal |= 0x8; + ral_setup_tx_desc(sc, desc, RAL_TX_IFS_NEW_BACKOFF | + RAL_TX_INSERT_TIMESTAMP, m0->m_pkthdr.len, rate, 0, + data->map->dm_segs->ds_addr); bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); @@ -1657,8 +1631,6 @@ ral_tx_bcn(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) sc->bcnq.cur * RAL_TX_DESC_SIZE, RAL_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); - sc->bcnq.cur = (sc->bcnq.cur + 1) % RAL_BEACON_RING_COUNT; - return 0; } @@ -1666,29 +1638,18 @@ int ral_tx_mgt(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) { struct ieee80211com *ic = &sc->sc_ic; - struct ifnet *ifp = &ic->ic_if; struct ral_tx_desc *desc; struct ral_tx_data *data; struct ieee80211_frame *wh; - struct ieee80211_duration d0, dn; - int rate, npkt, error; + uint16_t dur; + uint32_t flags = 0; + int rate, error; desc = &sc->prioq.desc[sc->prioq.cur]; data = &sc->prioq.data[sc->prioq.cur]; - wh = mtod(m0, struct ieee80211_frame *); - rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 4; - error = ieee80211_compute_duration(wh, m0->m_pkthdr.len, - ic->ic_flags & ~IEEE80211_F_WEPON, ic->ic_fragthreshold, rate, &d0, - &dn, &npkt, ifp->if_flags & IFF_DEBUG); - if (error != 0) { - printf("%s: could not compute duration\n", sc->sc_dev.dv_xname); - m_freem(m0); - return error; - } - error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); if (error != 0) { @@ -1721,33 +1682,24 @@ ral_tx_mgt(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) data->m = m0; data->ni = ni; - desc->physaddr = htole32(data->map->dm_segs->ds_addr); - - desc->flags = htole32(RAL_TX_VALID | RAL_TX_BUSY); - desc->flags |= htole32(m0->m_pkthdr.len << 16); + wh = mtod(m0, struct ieee80211_frame *); if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { - desc->flags |= htole32(RAL_TX_NEED_ACK); + flags |= RAL_TX_NEED_ACK; - *(uint16_t *)wh->i_dur = htole16(d0.d_data_dur); + dur = ral_txtime(RAL_ACK_SIZE, rate, ic->ic_flags) + RAL_SIFS; + *(uint16_t *)wh->i_dur = htole16(dur); + /* tell hardware to add timestamp for probe responses */ if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_MGT && (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PROBE_RESP) - desc->flags |= htole32(RAL_TX_INSERT_TIMESTAMP); + flags |= RAL_TX_INSERT_TIMESTAMP; } - desc->wme = htole32( - 8 << RAL_WME_CWMAX_BITS_SHIFT | - 3 << RAL_WME_CWMIN_BITS_SHIFT | - 2 << RAL_WME_AIFSN_BITS_SHIFT); - - desc->plcp_length = htole16(d0.d_plcp_len); - desc->plcp_service = 4; - desc->plcp_signal = ral_plcp_signal(rate); - if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) - desc->plcp_signal |= 0x8; + ral_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 0, + data->map->dm_segs->ds_addr); bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); @@ -1755,8 +1707,8 @@ ral_tx_mgt(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) sc->prioq.cur * RAL_TX_DESC_SIZE, RAL_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); - DPRINTFN(10, ("sending mgt frame len=%u idx=%u duration=%u plcp=%u\n", - m0->m_pkthdr.len, sc->prioq.cur, d0.d_data_dur, d0.d_plcp_len)); + DPRINTFN(10, ("sending mgt frame len=%u idx=%u rate=%u\n", + m0->m_pkthdr.len, sc->prioq.cur, rate)); /* kick prio */ sc->prioq.queued++; @@ -1806,10 +1758,10 @@ ral_tx_data(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) struct ral_tx_data *data; struct ral_node *rn; struct ieee80211_frame *wh; - struct ieee80211_frame_rts *rts; - struct ieee80211_duration d0, dn; - struct mbuf *m, *mnew; - int rate, npkt, error; + struct mbuf *mnew; + uint16_t dur; + uint32_t flags = 0; + int rate, error; wh = mtod(m0, struct ieee80211_frame *); @@ -1818,43 +1770,37 @@ ral_tx_data(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) wh, m0->m_pkthdr.len, ic->ic_fixed_rate, NULL, 0); rate = ni->ni_rates.rs_rates[ni->ni_txrate] & IEEE80211_RATE_VAL; - error = ieee80211_compute_duration(wh, m0->m_pkthdr.len, ic->ic_flags, - ic->ic_fragthreshold, rate, &d0, &dn, &npkt, - ifp->if_flags & IFF_DEBUG); - if (error != 0) { - printf("%s: could not compute duration\n", sc->sc_dev.dv_xname); - m_freem(m0); - return error; - } - if (ic->ic_flags & IEEE80211_F_WEPON) { m0 = ieee80211_wep_crypt(ifp, m0, 1); if (m0 == NULL) return ENOBUFS; } - if (m0->m_pkthdr.len > ic->ic_rtsthreshold) { - desc = &sc->txq.desc[sc->txq.cur_encrypt]; - data = &sc->txq.data[sc->txq.cur_encrypt]; + /* + * IEEE Std 802.11-1999, pp 82: "A STA shall use an RTS/CTS exchange + * for directed frames only when the length of the MPDU is greater + * than the length threshold indicated by [...]" ic_rtsthreshold. + */ + if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && + m0->m_pkthdr.len > ic->ic_rtsthreshold) { + struct mbuf *m; + uint16_t dur; + int rtsrate, ackrate; - /* switch to long retry */ - /* switch to frame gap SIFS */ + rtsrate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 4; + ackrate = ral_ack_rate(rate); - MGETHDR(m, M_DONTWAIT, MT_DATA); - if (m == NULL) { - printf("%s: could not allocate RTS/CTS frame\n", - sc->sc_dev.dv_xname); - return ENOMEM; - } + dur = ral_txtime(m0->m_pkthdr.len + 4, rate, ic->ic_flags) + + ral_txtime(RAL_CTS_SIZE, rtsrate, ic->ic_flags) + + ral_txtime(RAL_ACK_SIZE, ackrate, ic->ic_flags) + + 3 * RAL_SIFS; - rts = mtod(m, struct ieee80211_frame_rts *); - rts->i_fc[0] = IEEE80211_FC0_TYPE_CTL | - IEEE80211_FC0_SUBTYPE_RTS; - *(uint16_t *)rts->i_dur = htole16(d0.d_rts_dur); - memcpy(rts->i_ra, wh->i_addr1, IEEE80211_ADDR_LEN); - memcpy(rts->i_ta, wh->i_addr2, IEEE80211_ADDR_LEN); + m = ral_get_rts(sc, wh, dur); - error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, + desc = &sc->txq.desc[sc->txq.cur_encrypt]; + data = &sc->txq.data[sc->txq.cur_encrypt]; + + error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not map mbuf (error %d)\n", @@ -1864,19 +1810,34 @@ ral_tx_data(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) return error; } + /* avoid multiple free() of the same node for each fragment */ + ieee80211_ref_node(ni); + data->m = m; data->ni = ni; - bus_dmamap_sync(sc->sc_dmat, data->map, 0, - data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); + /* RTS frames are not taken into account for rssadapt */ + data->id.id_node = NULL; - desc->flags = htole32(RAL_TX_VALID | RAL_TX_BUSY); + ral_setup_tx_desc(sc, desc, RAL_TX_NEED_ACK | RAL_TX_NOT_LAST, + m->m_pkthdr.len, rtsrate, 1, data->map->dm_segs->ds_addr); - desc->physaddr = htole32(data->map->dm_segs->ds_addr); + bus_dmamap_sync(sc->sc_dmat, data->map, 0, + data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); + bus_dmamap_sync(sc->sc_dmat, sc->txq.map, + sc->txq.cur_encrypt * RAL_TX_DESC_SIZE, RAL_TX_DESC_SIZE, + BUS_DMASYNC_PREWRITE); sc->txq.queued++; sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RAL_TX_RING_COUNT; + + /* + * IEEE Std 802.11-1999: when an RTS/CTS exchange is used, the + * asynchronous data frame shall be transmitted after the CTS + * frame and a SIFS period. + */ + flags |= RAL_TX_LONG_RETRY | RAL_TX_IFS_SIFS; } data = &sc->txq.data[sc->txq.cur_encrypt]; @@ -1951,29 +1912,16 @@ ral_tx_data(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) data->id.id_node = ni; data->id.id_rssi = ni->ni_rssi; - desc->physaddr = htole32(data->map->dm_segs->ds_addr); - - desc->flags = htole32(RAL_TX_CIPHER_BUSY); - desc->flags |= htole32(m0->m_pkthdr.len << 16); - if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { - desc->flags |= htole32(RAL_TX_NEED_ACK); + flags |= RAL_TX_NEED_ACK; - *(uint16_t *)wh->i_dur = htole16(d0.d_data_dur); + dur = ral_txtime(RAL_ACK_SIZE, ral_ack_rate(rate), + ic->ic_flags) + RAL_SIFS; + *(uint16_t *)wh->i_dur = htole16(dur); } - desc->wme = htole32( - 8 << RAL_WME_CWMAX_BITS_SHIFT | - 3 << RAL_WME_CWMIN_BITS_SHIFT | - 2 << RAL_WME_AIFSN_BITS_SHIFT); - - desc->plcp_length = htole16(d0.d_plcp_len); - desc->plcp_service = 4; - if (d0.d_residue != 0) - desc->plcp_service |= RAL_PLCP_LENGEXT; - desc->plcp_signal = ral_plcp_signal(rate); - if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) - desc->plcp_signal |= 0x8; + ral_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 1, + data->map->dm_segs->ds_addr); bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); @@ -1981,9 +1929,8 @@ ral_tx_data(struct ral_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) sc->txq.cur_encrypt * RAL_TX_DESC_SIZE, RAL_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); - DPRINTFN(10, ("sending data frame len=%u idx=%u phys=%x plcp=%u " - "residue=%u\n", m0->m_pkthdr.len, sc->txq.cur_encrypt, - d0.d_data_dur, d0.d_plcp_len, d0.d_residue)); + DPRINTFN(10, ("sending data frame len=%u idx=%u rate=%u\n", + m0->m_pkthdr.len, sc->txq.cur_encrypt, rate)); /* kick encrypt */ sc->txq.queued++; @@ -2044,6 +1991,7 @@ ral_start(struct ifnet *ifp) if (ral_tx_data(sc, m0, ni) != 0) { if (ni != NULL) ieee80211_release_node(ic, ni); + ifp->if_oerrors++; break; } } diff --git a/sys/dev/ic/ralreg.h b/sys/dev/ic/ralreg.h index 739d4a28a46..b15333b30a1 100644 --- a/sys/dev/ic/ralreg.h +++ b/sys/dev/ic/ralreg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: ralreg.h,v 1.1 2005/02/15 20:51:21 damien Exp $ */ +/* $OpenBSD: ralreg.h,v 1.2 2005/03/11 20:47:59 damien Exp $ */ /*- * Copyright (c) 2005 @@ -190,6 +190,8 @@ struct ral_tx_desc { #define RAL_TX_IFS_NEW_BACKOFF (2 << 13) #define RAL_TX_IFS_NONE (3 << 13) +#define RAL_TX_LONG_RETRY (1 << 15) + #define RAL_TX_CIPHER_MASK 0xe0000000 #define RAL_TX_CIPHER_NONE (0 << 29) #define RAL_TX_CIPHER_WEP40 (1 << 29) @@ -240,7 +242,6 @@ struct ral_rx_desc { uint32_t reserved[2]; } __packed; - #define RAL_RF1 0 #define RAL_RF2 2 #define RAL_RF3 1 |