fix for:

man: no entry for sk in the manual

2 files changed, 157 insertions, 5 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index cafbe9b7000..4ae18d77bd9 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -1,4 +1,4 @@
-#	$OpenBSD: Makefile,v 1.78 1999/09/15 19:31:46 deraadt Exp $
+#	$OpenBSD: Makefile,v 1.79 1999/10/01 03:14:04 jason Exp $
 #	$NetBSD: Makefile,v 1.22.4.2 1996/07/18 00:51:10 jtc Exp $
 
 MAN=	atalk.4 atapiscsi.4 audio.4 adv.4 ahc.4 ax.4 bpf.4 bridge.4 ccd.4 \
@@ -8,10 +8,10 @@ MAN=	atalk.4 atapiscsi.4 audio.4 adv.4 ahc.4 ax.4 bpf.4 bridge.4 ccd.4 \
 	isapnp.4 iso.4 isp.4 ksyms.4 lkm.4 lmc.4 lo.4 lxtphy.4 midi.4 mii.4 \
 	mtdphy.4 mtio.4 mx.4 ncr.4 ne.4 netintro.4 ns.4 nsip.4 nsphy.4 null.4 \
 	opl.4 options.4 pciide.4 pcmcia.4 pn.4 pty.4 qsphy.4 raid.4 random.4 \
-	rl.4 rln.4 rlphy.4 route.4 scsi.4 sd.4 sl.4 sm.4 spp.4 sppp.4 sqphy.4 \
-	ss.4 st.4 sv.4 tb.4 tcp.4 termios.4 ti.4 tl.4 tlphy.4 tty.4 tp.4 \
-	tun.4 tx.4 udp.4 ugen.4 uhid.4 uk.4 unix.4 usb.4 vnd.4 vr.4 wb.4 wd.4 \
-	we.4 xl.4 ym.4
+	rl.4 rln.4 rlphy.4 route.4 scsi.4 sd.4 sk.4 sl.4 sm.4 spp.4 sppp.4 \
+	sqphy.4 ss.4 st.4 sv.4 tb.4 tcp.4 termios.4 ti.4 tl.4 tlphy.4 tty.4 \
+	tp.4 tun.4 tx.4 udp.4 ugen.4 uhid.4 uk.4 unix.4 usb.4 vnd.4 vr.4 wb.4 \
+	wd.4 we.4 xl.4 ym.4
 
 MLINKS+=fd.4 stderr.4 fd.4 stdin.4 fd.4 stdout.4
 MLINKS+=netintro.4 networking.4
diff --git a/share/man/man4/sk.4 b/share/man/man4/sk.4
new file mode 100644
index 00000000000..c684aa1c529
--- /dev/null
+++ b/share/man/man4/sk.4
@@ -0,0 +1,152 @@
+.\"	$OpenBSD: sk.4,v 1.1 1999/10/01 03:14:04 jason Exp $
+.\"
+.\" Copyright (c) 1997, 1998, 1999
+.\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by Bill Paul.
+.\" 4. Neither the name of the author nor the names of any co-contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"   without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+.\" THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $FreeBSD: src/share/man/man4/man4.i386/sk.4,v 1.3 1999/08/28 00:20:29 peter Exp $
+.\"
+.Dd July 3, 1999
+.Dt SK 4
+.Os
+.Sh NAME
+.Nm sk
+.Nd "SysKonnect SK-984x PCI gigabit ethernet adapter driver"
+.Sh SYNOPSIS
+.Cd "skc* at pci? dev ? function ?"
+.Cd "sk* at skc?"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for the SysKonnect SK-984x series PCI
+gigabit ethernet adapters, including the following:
+.Bl -bullet -offset indent
+.It
+SK-9841 SK-NET GE-LX single port, single mode fiber adapter
+.It
+SK-9842 SK-NET GE-SX single port, multimode fiber adapter
+.It
+SK-9843 SK-NET GE-LX dual port, single mode fiber adapter
+.It
+SK-9844 SK-NET GE-SX duak port, multimode fiber adapter
+.El
+.Pp
+The SysKonnect adapters consist of two main components: the XaQti Corp.
+XMAC II gigabit MAC (sk) and the SysKonnect GEnesis controller ASIC (skc).
+The XMAC provides the gigabit MAC and PHY suspport while the GEnesis
+provides an interface to the PCI bus, DMA support, packet buffering
+and arbitration. The GEnesis can control up to two XMACs simultaneously,
+allowing dual-port NIC configurations.
+.Pp
+The
+.Nm
+driver configures dual port SysKonnect adapters such that each XMAC
+is treated as a separate logical network interface. Both ports can
+operate indepenently of each other and can be connected to separate
+networks. The SysKonnect driver software currently only uses the
+second port on dual port adapters for failover purposes: if the link
+on the primary port fails, the SysKonnect driver will automatically
+switch traffic onto the second port.
+.Pp
+The XaQti XMAC II supports full and half duplex operation with
+autonegotiation. The XMAC also supports unlimited frame sizes.
+Support for jumbo frames is provided via the interface MTU setting.
+Selecting an MTU larger than 1500 bytes with the
+.Xr ifconfig 8
+utility configures the adapter to receive and transmit jumbo frames.
+Using jumbo frames can greatly improve performance for certain tasks,
+such as file transfers and data streaming.
+.Pp
+The following media types and options (as given to
+.Xr ifconfig 8 )
+are supported:
+.Pp
+.Bl -tag -width xxx -offset indent
+.It Cm media No autoselect
+Enable autoselection of the media type and options.
+The user can manually override
+the autoselected mode by adding media options to the appropriate
+.Pa /etc/hostname.skX
+file.
+.It Cm media No 1000baseSX Cm mediaopt No full-duplex
+Set 1000Mbps (Gigabit Ethernet) operation and force full-duplex mode.
+.It Cm media No 1000baseSX Cm mediaopt No half-duplex
+Set 1000Mbps (Gigabit Ethernet) operation and force full-duplex mode.
+.El
+.Pp
+For more information on configuring this device, see
+.Xr ifconfig 8 .
+To view a list of media types and options supported by your card try
+.Ic ifconfig -m <device> .
+For example,
+.Ic ifconfig -m sk0 .
+.Pp
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "sk%d: couldn't map memory"
+A fatal initialization error has occurred.
+.It "sk%d: couldn't map ports"
+A fatal initialization error has occurred.
+.It "sk%d: couldn't map interrupt"
+A fatal initialization error has occurred.
+.It "sk%d: failed to enable memory mapping!"
+The driver failed to initialize PCI shared memory mapping. This might
+happen if the card is not in a bus-master slot.
+.It "sk%d: no memory for jumbo buffers!"
+The driver failed to allocate memory for jumbo frames during
+initialization.
+.It "sk%d: watchdog timeout"
+The device has stopped responding to the network, or there is a problem with
+the network connection (cable).
+.El
+.Sh SEE ALSO
+.Xr ifmedia 4 ,
+.Xr ifconfig 8
+.Rs
+.%T XaQti XMAC II datasheet
+.%O http://www.xaqti.com
+.Re
+.Rs
+.%T SysKonnect GEnesis programming manual
+.%O http://www.syskonnect.com
+.Re
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Fx 3.0 ,
+and
+.Ox
+support was added in
+.Ox 2.6 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Bill Paul Aq wpaul@ctr.columbia.edu .