summaryrefslogtreecommitdiff
path: root/distrib/alpha/ramdisk/install.md
diff options
context:
space:
mode:
authorNiklas Hallqvist <niklas@cvs.openbsd.org>1997-05-07 12:46:59 +0000
committerNiklas Hallqvist <niklas@cvs.openbsd.org>1997-05-07 12:46:59 +0000
commitd48e8aff47b9a89c1a3e6143764547a3ae49ec02 (patch)
treec990088fafe82f4f70d779f4666189af9a72961a /distrib/alpha/ramdisk/install.md
parent1a826585c4670a8614850f07dd07676af8842ded (diff)
*Very* rough cut at a ramdisk-kernel that fits onto a floppy.
The ecoffrdsetroot support is from millert@openbsd.org. Mostly copied from the powerpc ports, thus a lot of powerpc specific stuff remains. Needs a lot of work, hopefully done in the next few days.
Diffstat (limited to 'distrib/alpha/ramdisk/install.md')
-rw-r--r--distrib/alpha/ramdisk/install.md267
1 files changed, 267 insertions, 0 deletions
diff --git a/distrib/alpha/ramdisk/install.md b/distrib/alpha/ramdisk/install.md
new file mode 100644
index 00000000000..5aaf553dc21
--- /dev/null
+++ b/distrib/alpha/ramdisk/install.md
@@ -0,0 +1,267 @@
+# $OpenBSD: install.md,v 1.1 1997/05/07 12:46:56 niklas Exp $
+# Copyright (c) 1996 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Jason R. Thorpe.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by the NetBSD
+# Foundation, Inc. and its contributors.
+# 4. Neither the name of The NetBSD Foundation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# machine dependent section of installation/upgrade script.
+#
+#
+
+TMPWRITEABLE=/tmp/writeable
+KERNFSMOUNTED=/tmp/kernfsmounted
+
+md_copy_kernel() {
+ echo "This must be done later by hand"
+}
+
+md_set_term() {
+ if [ ! -z "$TERM" ]; then
+ return
+ fi
+ echo -n "Specify terminal type [xterm]: "
+ getresp "xterm"
+ TERM="$resp"
+ export TERM
+}
+
+md_get_diskdevs() {
+ egrep "^sd[0-9] " < /kern/msgbuf
+}
+
+md_get_cddevs() {
+ egrep "^cd[0-9] " < /kern/msgbuf
+}
+
+md_get_ifdevs() {
+ # return available network devices
+ egrep "(^ed[0-9] |^[dl]e[0-9] )"< /kern/msgbuf | cut -d" " -f1 | sort -u
+}
+
+md_get_partition_range() {
+ # return range of valid partition letters
+ echo "[a-p]"
+}
+
+md_installboot() {
+ echo "This must be done later by hand"
+}
+md_labeldisk() {
+ echo "huh"
+}
+
+md_checkfordisklabel() {
+ # $1 is the disk to check
+ local rval
+
+ disklabel $1 >> /dev/null 2> /tmp/checkfordisklabel
+ if grep "no disk label" /tmp/checkfordisklabel; then
+ rval=1
+ elif grep "disk label corrupted" /tmp/checkfordisklabel; then
+ rval=2
+ else
+ rval=0
+ fi
+
+ rm -f /tmp/checkfordisklabel
+ return $rval
+}
+
+md_prep_disklabel()
+{
+ local _disk
+
+ _disk=$1
+ md_checkfordisklabel $_disk
+ case $? in
+ 0)
+ echo -n "Do you wish to edit the disklabel on $_disk? [y] "
+ ;;
+ 1)
+ echo "WARNING: Disk $_disk has no label"
+ echo -n "Do you want to create one with the disklabel editor? [y] "
+ ;;
+ 2)
+ echo "WARNING: Label on disk $_disk is corrupted"
+ echo -n "Do you want to try and repair the damage using the disklabel editor? [y] "
+ ;;
+ esac
+
+ getresp "y"
+ case "$resp" in
+ y*|Y*) ;;
+ *) return ;;
+ esac
+
+ # display example
+ cat << \__md_prep_disklabel_1
+
+Here is an example of what the partition information will look like once
+you have entered the disklabel editor. Disk partition sizes and offsets
+are in sector (most likely 512 bytes) units. Make sure these size/offset
+pairs are on cylinder boundaries (the number of sector per cylinder is
+given in the `sectors/cylinder' entry, which is not shown here).
+
+Do not change any parameters except the partition layout and the label name.
+It's probably also wisest not to touch the `8 partitions:' line, even
+in case you have defined less than eight partitions.
+
+[Example]
+8 partitions:
+# size offset fstype [fsize bsize cpg]
+ a: 50176 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 111)
+ b: 64512 50176 swap # (Cyl. 112 - 255)
+ c: 640192 0 unknown # (Cyl. 0 - 1428)
+ d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428)
+[End of example]
+
+__md_prep_disklabel_1
+ echo -n "Press [Enter] to continue "
+ getresp ""
+ disklabel -W ${_disk}
+ disklabel -e ${_disk}
+}
+
+md_welcome_banner() {
+{
+ if [ "$MODE" = "install" ]; then
+ echo ""
+ echo "Welcome to the OpenBSD/powerpc ${VERSION} installation program."
+ cat << \__welcome_banner_1
+
+This program is designed to help you put OpenBSD on your disk,
+in a simple and rational way. You'll be asked several questions,
+and it would probably be useful to have your disk's hardware
+manual, the installation notes, and a calculator handy.
+__welcome_banner_1
+
+ else
+ echo ""
+ echo "Welcome to the OpenBSD/powerpc ${VERSION} upgrade program."
+ cat << \__welcome_banner_2
+
+This program is designed to help you upgrade your OpenBSD system in a
+simple and rational way.
+
+As a reminder, installing the `etc' binary set is NOT recommended.
+Once the rest of your system has been upgraded, you should manually
+merge any changes to files in the `etc' set into those files which
+already exist on your system.
+__welcome_banner_2
+ fi
+
+cat << \__welcome_banner_3
+
+As with anything which modifies your disk's contents, this
+program can cause SIGNIFICANT data loss, and you are advised
+to make sure your data is backed up before beginning the
+installation process.
+
+Default answers are displayed in brackets after the questions.
+You can hit Control-C at any time to quit, but if you do so at a
+prompt, you may have to hit return. Also, quitting in the middle of
+installation may leave your system in an inconsistent state.
+
+__welcome_banner_3
+} | more
+}
+
+md_not_going_to_install() {
+ cat << \__not_going_to_install_1
+
+OK, then. Enter `halt' at the prompt to halt the machine. Once the
+machine has halted, power-cycle the system to load new boot code.
+
+__not_going_to_install_1
+}
+
+md_congrats() {
+ local what;
+ if [ "$MODE" = "install" ]; then
+ what="installed";
+ else
+ what="upgraded";
+ fi
+ cat << __congratulations_1
+
+CONGRATULATIONS! You have successfully $what OpenBSD!
+To boot the installed system, enter halt at the command prompt. Once the
+system has halted, reset the machine and boot from the disk.
+
+__congratulations_1
+}
+
+md_native_fstype() {
+}
+md_native_fsopts() {
+}
+
+md_makerootwritable() {
+ # 2048 is the size in DEV_BIZE blocks
+
+ if [ -e ${TMPWRITEABLE} ]
+ then
+ md_mountkernfs
+ return
+ fi
+ umount /tmp >> /dev/null 2>&1
+ if ! mount -t ffs -u /dev/rd0a / ; then
+ cat << \__rd0_failed_1
+
+FATAL ERROR: Can't mount the ram filesystem.
+
+__rd0_failed_1
+ exit
+ fi
+
+ # Bleh. Give mount_mfs a chance to DTRT.
+ sleep 2
+ > ${TMPWRITEABLE}
+
+ md_mountkernfs
+}
+md_mountkernfs() {
+ if [ -e ${KERNFSMOUNTED} ]
+ then
+ return
+ fi
+ if ! mount -t kernfs /kern /kern
+ then
+ cat << \__kernfs_failed_1
+FATAL ERROR: Can't mount kernfs filesystem
+__kernfs_failed_1
+ exit
+ fi
+ > ${KERNFSMOUNTED}
+}