sync to netbsd

1 files changed, 953 insertions, 0 deletions

diff --git a/distrib/arm32/floppies/inst-common/inst.sh b/distrib/arm32/floppies/inst-common/inst.sh
new file mode 100644
index 00000000000..619dc4d49f7
--- /dev/null
+++ b/distrib/arm32/floppies/inst-common/inst.sh
@@ -0,0 +1,953 @@
+#!/bin/sh
+#
+# $NetBSD: inst.sh,v 1.1 1996/05/16 19:59:05 mark Exp $
+#
+# Copyright (c) 1995-1996 Mark Brinicombe
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Mark Brinicombe.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#	from inst,v 1.9 1996/04/18 20:56:14 mark Exp $
+#
+
+#
+# Installation utilites (functions), to get NetBSD installed on
+# the hard disk.  These are meant to be invoked from the shell prompt,
+# by people installing NetBSD.
+#
+
+VERSION=`echo '$Revision: 1.1 $' | cut '-d ' -f2`
+
+Load_tape()
+{
+	Tmp_dir
+	echo -n	"Which tape drive will you be using? [rst0] "
+	read which
+	if [ "X$which" = "X" ]; then
+		which=rst0
+	fi
+	echo -n "Insert the tape into the tape drive and hit return to "
+	echo -n "continue..."
+	read foo
+	echo	"Extracting files from the tape..."
+	$TAR xvpf --unlink /dev/$which
+	echo	"Done."
+}
+
+
+Get_Dest_Dir()
+{
+	echo -n "Enter new path to dest directory [$dest_dir] "
+	read newdir
+	if [ ! "X$newdir" = "X" ]; then
+		dest_dir=$newdir
+	fi
+}
+
+
+Get_Distrib_Dir()
+{
+	echo -n "Enter new path to distrib directory [$distribdir] "
+	read distribdir
+	if [ "X$distribdir" = "X" ]; then
+		distribdir=$destdir/usr/distrib
+	fi
+	if [ ! -d $distribdir ]; then
+		echo -n "$distribdir does not exist, create it [n] "
+		read yorn
+		if [ "$yorn" = "y" ]; then
+			mkdir $distribdir
+		fi
+	fi
+}
+
+
+Set_Distrib_Dir()
+{
+	while [ ! -d $distribdir ]; do
+		echo "Directory $distribdir does not exist"
+		Get_Distrib_Dir
+	done
+
+	cd $distribdir
+}
+
+
+Load_Msdos_Fd()
+{
+	echo "Loading sets from msdos floppies"
+	Set_Distrib_Dir
+
+	which=
+	while [ "$which" != "0" -a "$which" != "1" ]; do
+		echo -n	"Read from which floppy drive ('0' or '1')? [0] "
+		read which
+		if [ "X$which" = "X" ]; then
+			which=0
+		fi
+	done
+
+	foo=
+	while [ "X$foo" = "X" ]; do
+	       	echo -n "Insert floppy (type s to stop, enter to load): "
+		read foo
+		if [ "X$foo" = "X" ]; then
+			mount -t msdos /dev/fd${which}a /mnt2
+			cp -rp /mnt2/* .
+			umount /mnt2
+		fi
+	done	
+}
+
+
+Load_Tar_Fd()
+{
+	echo "Loading sets from tar floppies"
+	Set_Distrib_Dir
+
+	which=
+	while [ "$which" != "0" -a "$which" != "1" ]; do
+		echo -n	"Read from which floppy drive ('0' or '1')? [0] "
+		read which
+		if [ "X$which" = "X" ]; then
+			which=0
+		fi
+	done
+
+	foo=
+	while [ "X$foo" = "X" ]; do
+	       	echo -n "Insert floppy (type s to stop, enter to load): "
+		read foo
+		if [ "X$foo" = "X" ]; then
+			tar xf /dev/fd${which}a
+		fi
+	done	
+}
+
+
+Load_Tar_Fd1()
+{
+	echo "Loading sets from multi-volume tar floppies"
+	Set_Distrib_Dir
+
+	which=
+	while [ "$which" != "0" -a "$which" != "1" ]; do
+		echo -n	"Read from which floppy drive ('0' or '1')? [0] "
+		read which
+		if [ "X$which" = "X" ]; then
+			which=0
+		fi
+	done
+
+	foo=
+	while [ "X$foo" = "X" ]; do
+	       	echo -n "Insert floppy (type s to stop, enter to load): "
+		read foo
+		if [ "X$foo" = "X" ]; then
+			tar xfM /dev/fd${which}a
+		fi
+	done	
+}
+
+
+Load_Sets()
+{
+	res0=
+	while [ "$res0" != "q" -a "$res0" != "Q" ]; do
+		echo ""
+		echo -n "1. Set distrib directory (Currently $distribdir"
+		if [ ! -d $distribdir ]; then
+			echo " - non-existant)"
+		else
+			echo ")"
+		fi
+		echo "2. Load sets from msdos floppies"
+		echo "3. Load sets from tar floppies"
+		echo "4. Load sets from multi-volume tar floppies"
+		echo "Q. Return to previous menu"
+		echo ""
+		echo -n "Choice : "
+		read res0
+		case "$res0" in
+		1)
+			Get_Distrib_Dir
+			;;
+		2)
+			Load_Msdos_Fd
+			;;
+		3)
+			Load_Tar_Fd
+			;;
+		4)
+			Load_Tar_Fd1
+			;;
+		q|Q)
+#			echo "Returning to previous menu"
+			;;
+		esac
+	done
+}
+
+
+Mount_SCSI_CDROM()
+{
+	which=
+	while [ "$which" != "0" -a "$which" != "1" ]; do
+		echo -n	"Mount which CDROM drive ('0' or '1')? [0] "
+		read which
+		if [ "X$which" = "X" ]; then
+			which=0
+		fi
+	done
+
+	mount -r -t cd9660 /dev/cd${which}a /cdrom
+	if [ ! $? = 0 ]; then
+		echo "Mount failed"
+	else
+		distribdir="/cdrom/usr/distrib"
+	fi
+	
+}
+
+
+Mount_SCSI_Disc()
+{
+	echo -n	"Mount which SCSI device as CDROM ? [sd0a] "
+	read which
+
+	mount -r -t cd9660 /dev/${which} /cdrom
+	if [ ! $? = 0 ]; then
+		echo "Mount failed"
+	else
+		distribdir="/cdrom/usr/distrib"
+	fi
+	
+}
+
+
+Mount_ATAPI_CDROM()
+{
+	mount -r -t cd9660 /dev/wcd0a /cdrom
+	if [ ! $? = 0 ]; then
+		mount -r -t cd9660 /dev/wcd0a /cdrom
+		if [ ! $? = 0 ]; then
+			echo "Mount failed"
+		else
+			distribdir="/cdrom/usr/distrib"
+		fi
+	else
+		distribdir="/cdrom/usr/distrib"
+	fi
+	
+}
+
+
+CDROM_Sets() {
+	res0=
+	while [ "$res0" != "q" -a "$res0" != "Q" ]; do
+		echo ""
+		echo -n "1. Set distrib directory (Currently $distribdir"
+		if [ ! -d $distribdir ]; then
+			echo " - non-existant)"
+		else
+			echo ")"
+		fi
+		echo -n "2. Mount SCSI CDROM "
+		if [ ! -b /dev/cd0a ]; then
+			echo "- Not available"
+		else
+			echo ""
+		fi
+		echo -n "3. Mount ATAPI CDROM "
+		if [ ! -b /dev/wcd0a ]; then
+			echo "- Not available"
+		else
+			echo ""
+		fi
+		if [ -f /var/inst/developer ]; then
+			echo "D. Mount SCSI disc as CDROM"
+		fi
+		echo "Q. Return to previous menu"
+		echo ""
+		echo -n "Choice : "
+		read res0
+		case "$res0" in
+		1)
+			Get_Distrib_Dir
+			;;
+		2)
+			Mount_SCSI_CDROM
+			;;
+		3)
+			Mount_ATAPI_CDROM
+			;;
+		d|D)
+			Mount_SCSI_Disc
+			;;
+		q|Q)
+			;;
+		esac
+	done
+}
+
+
+Show_Sets()
+{
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+
+	echo "Loaded sets in $distribdir :"
+	for set in $sets; do
+		cat "$set".set 2>/dev/null | grep 'desc:' | cut -f2-
+		cat "$set".SET 2>/dev/null | grep 'desc:' | cut -f2-
+	done
+}
+
+
+Show_Installed_Sets()
+{
+	INSTALLDIR=$dest_dir/var/inst/installed
+	cd $INSTALLDIR
+	if [ ! $? = 0 ]; then
+		return
+	fi
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+
+	echo "Installed sets:"
+	for set in $sets; do
+		cat "$set".set 2>/dev/null | grep 'desc:' | cut -f2-
+		cat "$set".SET 2>/dev/null | grep 'desc:' | cut -f2-
+	done
+}
+
+
+Validate_Sets()
+{
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Loaded sets in $distribdir :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+	echo -n "Enter set names or 'all' for all sets : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+	if [ "$res2" = "all" ]; then
+		res2="$list"
+	fi
+	sets="$res2"
+
+	echo "Validating in $distribdir :"
+	fail=""
+	for set in $sets; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+		p1=`cat $set.$setname 2>/dev/null | grep 'parts:' | cut -f2`
+		if [ "$p1" = "" ]; then
+			continue
+		fi
+		p2=`ls "$set".[0-9a-z][0-9a-z] 2>/dev/null | wc | awk '{print $1}'`
+		printf "$set\t:"
+#		echo "$p1 , $p2"
+		if [ ! "$p1" = "$p2" ]; then
+			echo -n " Failed parts check (need $p1, got $p2)"
+		else
+			echo -n " Passed parts check"
+		fi
+		loop=0
+		while [ $loop -lt $p1 ]; do
+			if [ $loop -lt 10 ]; then
+				file="0$loop"
+			else
+				file=$loop
+			fi
+			echo -n " [$file]"
+			cksum=`cat $set.$setname | grep "cksum.$file:" | cut -f2`
+			cksum1=`cat "$set".$file 2>&1 | cksum | cut "-d " -f1`
+			#echo "#$cksum, $cksum1#"
+			if [ ! "$cksum" = "$cksum1" ]; then
+				echo -n " part $file failed checksum"
+				fail="yes"
+			fi
+			loop=$(($loop+1))
+		done
+		if [ "$fail" = "" ]; then
+			echo " Passed checksum"
+		else
+			echo ""
+		fi
+	done
+}
+
+
+Verify_Sets()
+{
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Loaded sets in $distribdir :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+	echo -n "Enter set names or 'all' for all sets : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+	if [ "$res2" = "all" ]; then
+		res2="$list"
+	fi
+	sets="$res2"
+
+	echo "Verifing sets in $distribdir :"
+	for set in $sets; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+		printf "$set\t:"
+		cat "$set".[0-9a-z][0-9a-z] 2>/dev/null | $GUNZIP -t 2>/dev/null 1>/dev/null
+		if [ ! $? = 0 ]; then
+			echo " Failed archive integrity"
+		else
+			echo " Passed"
+		fi
+	done
+}
+
+
+Verify_Checksums()
+{
+	echo -n "Enter name of checksums file : "
+	read checkfile
+	if [ "X$checkfile" = "X" ]; then
+		return
+	fi
+
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Available sets in $distribdir :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+	echo -n "Enter set names or 'all' for all sets : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+	if [ "$res2" = "all" ]; then
+		res2="$list"
+	fi
+	sets="$res2"
+
+	TMPFILE1="/tmp/inst.cksum1"
+	TMPFILE2="/tmp/inst.cksum2"
+
+	echo "Verifing checksums for sets in $distribdir :"
+	for set in $sets; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+		printf "$set\t:"
+		grep cksum $set.$setname >$TMPFILE1
+		egrep -i "`echo ^$set.$setname | sed -e 's/\+/\\\\+/g'`" $checkfile | cut '-d:' -f2- >$TMPFILE2
+		cmp -s $TMPFILE1 $TMPFILE2
+		if [ $? = 0 ]; then
+			echo "checksums ok"
+		else
+			echo "checksum error"
+		fi
+	done
+	rm -f $TMPFILE1
+	rm -f $TMPFILE2
+}
+
+
+Check_Sets() {
+	res0=
+	while [ "$res0" != "q" -a "$res0" != "Q" ]; do
+		echo ""
+		echo "1. Validate distribution sets (confirm checksums)"
+		echo "2. Verify distribution sets (integrity check)"
+		echo "3. Verify checksums (confirm set checksums)"
+		echo "Q. Return to previous menu"
+		echo ""
+		echo -n "Choice : "
+		read res0
+		case "$res0" in
+		1)
+			Validate_Sets
+			;;
+		2)
+			Verify_Sets
+			;;
+		3)
+			Verify_Checksums
+			;;
+		q|Q)
+			;;
+		esac
+	done
+}
+
+
+
+
+List_Sets()
+{
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Loaded sets in $distribdir :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+	echo -n "Enter set names or 'all' for all sets : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+	if [ "$res2" = "all" ]; then
+		res2="$list"
+	fi
+	sets="$res2"
+
+	echo "Listing contents of sets in $distribdir :"
+	for set in $sets; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+		echo "$set:"
+		cat "$set".[0-9a-z][0-9a-z] | $GUNZIP | $TAR -tpvf -
+	done
+}
+
+
+Install_Sets()
+{
+# Make sure all the directories exist for recording the installation
+
+	INSTALLDIR=$dest_dir/var/inst
+	if [ ! -d $dest_dir/var ]; then
+		echo "Creating $dest_dir/var"
+		mkdir $dest_dir/var
+	fi
+	if [ ! -d $INSTALLDIR ]; then
+		echo "Creating $INSTALLDIR"
+		mkdir $INSTALLDIR
+	fi
+	if [ ! -d $INSTALLDIR/installed ]; then
+		echo "Creating $INSTALLDIR/installed"
+		mkdir $INSTALLDIR/installed
+	fi
+	if [ ! -d $INSTALLDIR/sets ]; then
+		echo "Creating $INSTALLDIR/sets"
+		mkdir $INSTALLDIR/sets
+	fi
+
+	if [ ! -d $dest_dir/tmp ]; then
+		echo "Creating $dest_dir/tmp"
+		mkdir $dest_dir/tmp
+		chmod 1777 $dest_dir/tmp
+	fi
+
+# Set the distribution directory and list all the available sets
+
+	Set_Distrib_Dir
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Loaded sets in $distribdir :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+# Prompt for the sets to install
+
+	echo -n "Enter set names or 'all' for all sets : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+
+# Check for any of the special sets
+
+	if [ "$res2" = "all" ]; then
+		res2="$list"
+	fi
+
+	if [ "$res2" = "req" ]; then
+		res2="base etc misc text kern"
+	fi
+
+	if [ "$res2" = "std" ]; then
+		res2="base etc misc text local man kern"
+	fi
+
+# Hack to make sure the base set is the first installed
+
+	echo "$res2" | grep base 2>/dev/null >/dev/null
+	if [ $? = 0 ]; then
+		res2="base "`echo "$res2" | sed 's/base//'`
+	fi
+
+	echo "$res2" | grep BASE 2>/dev/null >/dev/null
+	if [ $? = 0 ]; then
+		res2="BASE "`echo "$res2" | sed 's/BASE//'`
+	fi
+
+	echo -n "Would you like to list the files as they're extracted? [n] "
+	read verbose
+	case $verbose in
+	y*|Y*)
+		tarverbose=v
+		;;
+	*)
+		tarverbose=
+		;;
+	esac
+
+	for set in $res2; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+
+# Test for conflicts
+
+		ok=""
+		for file in `ls $INSTALLDIR/installed/*.[sS][eE][tT] 2>/dev/null`; do
+			conflict="`grep conflict: $file | cut -d: -f2- 2>/dev/null`"
+			echo $conflict | egrep -i "(^|[[:space:]])$set([[:space:]]|$)" 2>/dev/null > /dev/null
+			if [ $? = 0 ]; then
+				echo "Set $set conflicts with installed set `basename $file`"
+				ok="no"
+				break
+			fi
+		done
+
+		if [ ! "$ok" = "" ]; then
+			continue
+		fi
+
+		conflicts="`grep conflict: $set.$setname | cut -d: -f2-`"
+		installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
+
+		for conflict in $conflicts ; do
+			echo $installed | egrep -i "(^|[[:space:]])$conflict.set([[:space:]]|$)" 2>/dev/null > /dev/null
+			if [ $? = 0 ]; then
+				echo "Set $set conflicts with installed set $conflict"
+				ok="no"
+				break;
+			fi
+		done
+
+		if [ ! "$ok" = "" ]; then
+			continue
+		fi
+
+		dependancies="`grep depend: $set.$setname | cut -d: -f2-`"
+		installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
+
+		for depend in $dependancies ; do
+			echo $installed | egrep -i "(^|[[:space:]])$depend\.set([[:space:]]|$)" 2> /dev/null >/dev/null
+			if [ ! $? = 0 ]; then
+				echo "Set $depend must be installed before $set"
+				ok="no"
+				break;
+			fi
+		done
+
+		if [ ! "$ok" = "" ]; then
+			continue
+		fi
+
+		if [ -f "$set".00 ]; then
+			if [ -x "$INSTALLDIR/scripts/$set" ]; then
+				echo "Running deinstallation script for $set"
+				(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set deinstall)
+			fi
+
+			filelist="$dest_dir/tmp/$set.files"
+			echo "Installing $set"
+			case $verbose in
+			y*|Y*)
+				cat "$set".[0-9a-z][0-9a-z] | $GUNZIP | (cd $dest_dir ; $TAR  --unlink -xpvf - | tee $filelist)
+				;;
+			*)
+				cat "$set".[0-9a-z][0-9a-z] | $GUNZIP | (cd $dest_dir ; $TAR  --unlink -xpvf - >$filelist)
+				;;
+			esac
+			echo "Generating installation information"
+			cat $filelist | awk '{ print $0 }' > $INSTALLDIR/installed/$set.files
+#			cat $filelist | awk '{ print $3 $8 }' > $INSTALLDIR/installed/$set.files
+			rm $filelist
+			cp $set.$setname $INSTALLDIR/installed/
+
+# Run any install script
+
+			if [ -x "$INSTALLDIR/scripts/$set" ]; then
+				echo "Running installation script for $set"
+				(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set install)
+			fi
+		else
+			echo "Set $set not available for installation"
+		fi
+		sync
+	done
+
+# Test for other set requirements
+
+	echo "Checking installed set requirements"
+
+	installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
+
+	for set in $installed; do
+		required="`grep req: $INSTALLDIR/installed/$set | cut -d: -f2- 2>/dev/null`"
+		for require in $required; do
+			echo $installed | egrep -i "(^|[[:space:]])$require.set([[:space:]]|$)" 2>/dev/null > /dev/null
+			if [ ! $? = 0 ]; then
+				echo "Set $set requires set $require"
+#				break
+			fi
+		done
+	done
+}
+
+
+Deinstall_Sets()
+{
+# Make sure all the directories exist for recording the installation
+
+	INSTALLDIR=$dest_dir/var/inst
+
+# Set the distribution directory and list all the available sets
+
+	cd $INSTALLDIR/installed
+	sets=`ls *.[sS][eE][tT] 2>/dev/null | sed -e 's/.[sS][eE][tT]//'`
+	list=""
+
+	echo "Installed sets :"
+	for set in $sets; do
+		printf "$set\t"
+		list="$list $set"
+	done
+	echo ""
+
+# Prompt for the sets to deinstall
+
+	echo -n "Enter set names : "
+	read res2
+	res2=`echo "$res2" | tr "," " " | tr "[A-Z]" "[a-z]"`
+
+	echo -n "Would you like to list the files as they're removed? [n] "
+	read verbose
+
+	for set in $res2; do
+		setname="set"
+		if [ ! -f "$set"."$setname" ]; then
+			setname="SET"
+			set=`echo $set | tr [a-z] [A-Z]`
+		fi
+
+		if [ -f "$set".set ]; then
+# Test for dependancies
+
+			ok=""
+			for file in `ls $INSTALLDIR/installed/*.[sS][eE][tT] 2>/dev/null`; do
+				depend="`grep depend: $file 2>/dev/null`"
+				echo $depend | egrep -i "(^|[[:space:]])$set([[:space:]]|$)" 2>/dev/null > /dev/null
+				if [ $? = 0 ]; then
+					echo "Installed set $file depends on set $set"
+					ok="no"
+					break
+				fi
+			done
+
+			if [ ! "$ok" = "" ]; then
+				continue
+			fi
+
+			echo "Deinstalling $set"
+			if [ -x "$INSTALLDIR/scripts/$set" ]; then
+				echo "Running deinstallation script for $set"
+				(cd $dest_dir ; INSTALLROOT=$dest_dir; export INSTALLROOT ; $INSTALLDIR/scripts/$set deinstall)
+			fi
+			case $verbose in
+			y*|Y*)
+				for file in `cat $set.files`; do
+					echo $file
+					(cd $dest_dir ; rm $file) 2>/dev/null >/dev/null
+				done
+				;;
+			*)
+				cat "$set.files" | (cd $dest_dir ; xargs rm 2>/dev/null >/dev/null )
+				;;
+			esac
+			rm "$set.files"
+			rm "$set.set"
+		else
+			echo "Set $set not available for deinstallation"
+		fi
+		sync
+	done
+
+# Test for other set requirements
+
+	echo "Checking installed set requirements"
+
+	installed="`(cd $INSTALLDIR/installed ; ls *.[sS][eE][tT]) 2>/dev/null`"
+
+	for set in $installed; do
+		required="`grep req: $INSTALLDIR/installed/$set | cut -d: -f2- 2>/dev/null`"
+		for require in $required; do
+			echo $installed | egrep -i "(^|[[:space:]])$require.set([[:space:]]|$)" 2>/dev/null > /dev/null
+			if [ ! $? = 0 ]; then
+				echo "Set $set requires set $require"
+#				break
+			fi
+		done
+	done
+}
+
+
+Select_Sets()
+{
+}
+
+
+Main_Menu()
+{
+	res1=
+	while [ "$res1" != "q" -a "$res1" != "Q" ]; do
+		echo ""
+		echo "RiscBSD (NetBSD/arm32) Installer V$VERSION"
+		echo ""
+		echo -n "1. Set distrib directory (Currently $distribdir"
+		if [ ! -d $distribdir ]; then
+			echo " - non-existant)"
+		else
+			echo ")"
+		fi
+		echo "2. Load distribution sets onto harddisc"
+		echo "3. Load distribution sets from CDROM"
+		echo "4. Show distribution sets"
+		echo "5. Show installed sets"
+		echo "6. Check sets (verify/validate)"
+		echo "7. List contents of distribution sets in $distribdir"
+		echo "8. Install distribution sets from $distribdir"
+		echo "D. Deinstall installed sets"
+		echo "R. Set root directory for install (Currently $dest_dir)"
+		echo "Q. Quit"
+		echo ""
+		echo -n "Choice : "
+		read res1
+		case "$res1" in
+		1)
+			Get_Distrib_Dir
+			;;
+		2)
+			Load_Sets
+			;;
+		3)
+			CDROM_Sets
+			;;
+		4)
+			Show_Sets
+			;;
+		5)
+			Show_Installed_Sets
+			;;
+		6)
+			Check_Sets
+			;;
+		7)
+			List_Sets
+			;;
+		8)
+			Install_Sets
+			;;
+		d|D)
+			Deinstall_Sets
+			;;
+		r|R)
+			Get_Dest_Dir
+			;;
+		q|Q)
+#			echo "Quitting"
+			;;
+		esac
+	done
+}
+
+
+# we know that /etc/fstab is only generated on the hard drive
+destdir=
+dest_dir=/
+if [ ! -f /etc/fstab ]; then
+	dest_dir=/mnt/
+fi
+if [ -f /etc/cdrom ]; then
+	dest_dir=/mnt/
+fi
+
+# counter for possible shared library confusion
+TAR=/usr/bin/tar
+GUNZIP=/usr/bin/gunzip
+
+distribdir=$destdir/usr/distrib
+
+#IAM=`whoami`
+#
+#if [ ! "$IAM" = "root" ]; then
+#	echo "inst should be run as root"
+#	exit
+#fi
+
+Main_Menu
+
+exit