sync to netbsd

1 files changed, 157 insertions, 0 deletions

diff --git a/distrib/arm32/floppies/inst/dot.instutils b/distrib/arm32/floppies/inst/dot.instutils
new file mode 100644
index 00000000000..46f29916203
--- /dev/null
+++ b/distrib/arm32/floppies/inst/dot.instutils
@@ -0,0 +1,157 @@
+# $NetBSD: dot.instutils,v 1.1 1996/05/16 19:58:58 mark Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Installation configuration utilites (functions), to get NetBSD configured
+# reasonably once it is installed on the hard disk.  These are meant to be
+# invoked from the shell prompt, by people installing NetBSD.
+
+Configure()
+{
+	DEV=/dev
+	ETC=/etc
+	if [ ! -f /etc/fstab ]; then
+		DEV=/mnt/dev
+		ETC=/mnt/etc
+	fi
+
+	echo	"You will now be prompted for information about this"
+	echo	"machine.  If you hit return, the default answer (in"
+	echo	"brackets) will be used."
+
+	echo	""
+	echo -n	"What is this machine's hostname? [unknown.host.domain] "
+	read hname
+	if [ "$hname" = "" ]; then
+		hname=unknown.host.domain
+	fi
+	echo $hname > ${ETC}/myname
+	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
+
+	echo	""
+	echo	"What domain is this machine in (this is NOT its YP"
+	echo -n	"domain name)? [$proto_domain] "
+	read dname
+	if [ "$dname" = "" ]; then
+		dname=$proto_domain
+	fi
+
+	echo	""
+	if [ -e $ETC/sendmail.cf ]; then
+		echo	"WARNING: A default sendmail.cf exists, and probably"
+		echo	"needs to be tuned and/or replaced, to work properly at"
+		echo	"your site!"
+	else
+		echo	"WARNING: No default sendmail.cf installed.  Did you"
+		echo	"forget to install the 'etc' distribution?"
+	fi
+
+	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
+
+	echo	""
+	echo -n	"Does this machine have an ethernet interface? [y] "
+        read resp
+        case "$resp" in
+	n*)
+		;;
+	*)
+		intf=
+		while [ "$intf" = "" ]; do
+			echo -n "What is the primary interface name "
+			echo -n "(e.g. ed0, ep0, etc)? "
+			read intf
+		done
+		echo -n "What is the hostname for this interface? [$hname] "
+		read ifname
+		if [ "$ifname" = "" ]; then
+			ifname=$hname
+		fi
+		ifaddr=
+		while [ "$ifaddr" = "" ]; do
+			echo -n "What is the IP address associated with "
+			echo -n "interface ${intf}? "
+			read ifaddr
+		done
+		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
+		    >> ${ETC}/hosts
+
+		echo -n "Does this interface have a special netmask? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What is the netmask? [0xffffff00] "
+				read ifnetmask
+				if [ "$ifnetmask" = "" ]; then
+					ifnetmask=0xffffff00
+				fi
+				;;
+			*)
+				ifnetmask=
+				;;
+		esac
+
+		echo -n "Does this interface need additional flags? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What flags? [link0] "
+				read ifflags
+				if [ "$ifflags" = "" ]; then
+					ifflags=link0
+				fi
+				;;
+			*)
+				ifflags=
+				;;
+		esac
+		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
+
+		echo    ""
+		echo -n	"WARNING: if you have any more ethernet interfaces, "
+		echo	"you will have to configure"
+		echo -n "them by hand.  Read the comments in /etc/netstart to "
+		echo	"learn how to do this."
+		;;
+	esac
+	
+	echo	""
+	echo -n	"Making device nodes (may take a while)..."
+	cd ${DEV}
+	sh MAKEDEV all
+	echo	" done."
+
+	sync
+
+	echo	""
+	echo	"If you haven't already installed a kernel on the hard drive"
+	echo	"using your kernel-copy floppy, do so now.  Kernel"
+	echo 	"installation instructions can be found in the"
+	echo 	"installation notes."	
+}