Clean up build of install floppy

9 files changed, 162 insertions, 247 deletions

diff --git a/distrib/i386/floppies/ramdisk/Makefile b/distrib/i386/floppies/ramdisk/Makefile
index 123f78bd5a2..0957e23c1c8 100644
--- a/distrib/i386/floppies/ramdisk/Makefile
+++ b/distrib/i386/floppies/ramdisk/Makefile
@@ -1,16 +1,15 @@
-#	$OpenBSD: Makefile,v 1.14 1997/05/07 06:03:24 deraadt Exp $
-
-# Revision is 2.1
-REV=           21
+#	$OpenBSD: Makefile,v 1.15 1997/05/08 05:56:21 tholo Exp $
 
 TOP=		${.CURDIR}/..
 
 .include "${TOP}/Makefile.inc"
 IMAGE=		mr.fs
+CBIN?=		instbin
 CRUNCHCONF?=    ${.CURDIR}/${CBIN}.conf
-BASE=mr
+LISTS=		${.CURDIR}/list
 
 MOUNT_POINT=	/mnt
+MTREE=		${.CURDIR}/mtree.conf
 
 FS=		floppy.fs
 VND?=		vnd0
@@ -18,11 +17,9 @@ VND_DEV=	/dev/${VND}a
 VND_RDEV=	/dev/r${VND}a
 VND_CRDEV=	/dev/r${VND}c
 PID!=		echo $$$$
-REALIMAGE!=	echo /tmp/image.${PID}
+REALIMAGE!=	echo /var/tmp/image.${PID}
 LISTFLOPPY=	${.CURDIR}/list_floppy
 
-.include "Makefile.inc"
-
 all:	${FS}
 
 ${FS}:	bsd.gz
@@ -33,10 +30,10 @@ ${FS}:	bsd.gz
 	mount ${VND_DEV} ${MOUNT_POINT}
 	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
 	    TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTFLOPPY}
+	/usr/mdec/installboot -v ${MOUNT_POINT}/boot ${DESTDIR}/usr/mdec/biosboot ${VND_CRDEV}
 	sync
 	cat /*bin/* > /dev/null
 	sync
-	/usr/mdec/installboot -v /mnt/boot ${DESTDIR}/usr/mdec/biosboot ${VND_CRDEV}
 	@echo ""
 	@df -i ${MOUNT_POINT}
 	@echo ""
@@ -63,11 +60,13 @@ bsd.rd:	${IMAGE} bsd rdsetroot
 	${.OBJDIR}/rdsetroot bsd.rd < ${IMAGE}
 
 bsd:
-	cd ${.CURDIR}/../../../../sys/arch/i386/conf && config RAMDISK
-	cd ${.CURDIR}/../../../../sys/arch/i386/compile/RAMDISK && \
-	    make clean && make depend && make
 	cp ${.CURDIR}/../../../../sys/arch/i386/compile/RAMDISK/bsd bsd
 
+#	cd ${.CURDIR}/../../../../sys/arch/i386/conf && config RAMDISK
+#	cd ${.CURDIR}/../../../../sys/arch/i386/compile/RAMDISK && \
+#	    make clean && make depend && make
+#	cp ${.CURDIR}/../../../../sys/arch/i386/compile/RAMDISK/bsd bsd
+
 ${IMAGE}: ${CBIN} rd_setup do_files rd_teardown
 
 rd_setup: ${CBIN}
@@ -98,6 +97,22 @@ unconfig:
 
 .PRECIOUS:	${IMAGE}
 
-
 install:
 	cp ${FS} ${DESTDIR}/snapshot/${FS}
+
+${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
+	crunchgen -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
+
+${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
+	make -f ${CBIN}.mk all
+
+do_files:
+	mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
+	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
+	    REV=${REV} TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
+
+clean cleandir:
+	/bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c \
+	    bsd bsd.rd bsd.gz floppy*.fs rdsetroot
+
+.include <bsd.obj.mk>
diff --git a/distrib/i386/floppies/ramdisk/Makefile.inc b/distrib/i386/floppies/ramdisk/Makefile.inc
deleted file mode 100644
index a2eb1ef363c..00000000000
--- a/distrib/i386/floppies/ramdisk/Makefile.inc
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#	$OpenBSD: Makefile.inc,v 1.5 1997/05/04 03:05:40 tholo Exp $
-#
-
-# TOP is assumed to be defined by Makefile including this one.
-
-CBIN?=		instbin
-COMMONDIR=	${TOP}/ramdisk
-
-MOUNT_POINT?=	${TOP}/${BASE}/fs
-
-LISTS=		${COMMONDIR}/../common/list ${.CURDIR}/list
-CRUNCHCONF?=	${COMMONDIR}/${CBIN}.conf
-MTREE=		${COMMONDIR}/mtree.conf
-
-${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
-	crunchgen -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
-
-${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
-	make -f ${CBIN}.mk all
-
-do_files:
-	mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
-	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
-	    REV=${REV} TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
-
-clean cleandir:
-	/bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c \
-	    bsd bsd.rd bsd.gz floppy-*.fs 
-
-.include <bsd.obj.mk>
-.include <bsd.subdir.mk>
diff --git a/distrib/i386/floppies/ramdisk/disktab.preinstall b/distrib/i386/floppies/ramdisk/disktab.preinstall
deleted file mode 100644
index 022bb27d3fd..00000000000
--- a/distrib/i386/floppies/ramdisk/disktab.preinstall
+++ /dev/null
@@ -1,31 +0,0 @@
-#	$OpenBSD: disktab.preinstall,v 1.2 1997/04/17 02:10:45 niklas Exp $
-#
-# Disk geometry and partition layout tables. 
-# Key:
-#	dt	controller type
-#	ty	type of disk (fixed, removeable, simulated)
-#	d[0-4]	drive-type-dependent parameters
-#	ns	#sectors/track
-#	nt	#tracks/cylinder
-#	nc	#cylinders/disk
-#	sc	#sectors/cylinder, nc*nt default
-#	su	#sectors/unit, sc*nc default
-#	se	sector size, DEV_BSIZE default
-#	rm	rpm, 3600 default
-#	sf	supports bad144-style bad sector forwarding
-#	sk	sector skew per track, default 0
-#	cs	sector skew per cylinder, default 0
-#	hs	headswitch time, default 0
-#	ts	one-cylinder seek time, default 0
-#	il	sector interleave (n:1), 1 default
-#	bs	boot block size, default BBSIZE
-#	sb	superblock size, default SBSIZE
-#	o[a-h]	partition offsets in sectors
-#	p[a-h]	partition sizes in sectors
-#	b[a-h]	partition block sizes in bytes
-#	f[a-h]	partition fragment sizes in bytes
-#	t[a-h]	partition types (filesystem, swap, etc)
-#
-# All partition sizes reserve space for bad sector tables.
-# (5 cylinders needed for maintenance + replacement sectors)
-#
diff --git a/distrib/i386/floppies/ramdisk/dot.instutils b/distrib/i386/floppies/ramdisk/dot.instutils
deleted file mode 100644
index 89acf73dcad..00000000000
--- a/distrib/i386/floppies/ramdisk/dot.instutils
+++ /dev/null
@@ -1,156 +0,0 @@
-#	$OpenBSD: dot.instutils,v 1.1 1997/04/13 17:17:53 mickey Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Installation configuration utilites (functions), to get OpenBSD configured
-# reasonably once it is installed on the hard disk.  These are meant to be
-# invoked from the shell prompt, by people installing OpenBSD.
-
-Configure()
-{
-	DEV=/dev
-	ETC=/etc
-	if [ ! -f /etc/fstab ]; then
-		DEV=/mnt/dev
-		ETC=/mnt/etc
-	fi
-
-	echo	"You will now be prompted for information about this"
-	echo	"machine.  If you hit return, the default answer (in"
-	echo	"brackets) will be used."
-
-	echo	""
-	echo -n	"What is this machine's hostname? [unknown.host.domain] "
-	read hname
-	if [ "$hname" = "" ]; then
-		hname=unknown.host.domain
-	fi
-	echo $hname > ${ETC}/myname
-	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-
-	echo	""
-	echo	"What domain is this machine in (this is NOT its YP"
-	echo -n	"domain name)? [$proto_domain] "
-	read dname
-	if [ "$dname" = "" ]; then
-		dname=$proto_domain
-	fi
-
-	echo	""
-	if [ -e $ETC/sendmail.cf ]; then
-		echo	"WARNING: A default sendmail.cf exists, and probably"
-		echo	"needs to be tuned and/or replaced, to work properly at"
-		echo	"your site!"
-	else
-		echo	"WARNING: No default sendmail.cf installed.  Did you"
-		echo	"forget to install the 'etc' distribution?"
-	fi
-
-	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
-
-	echo	""
-	echo -n	"Does this machine have an ethernet interface? [y] "
-        read resp
-        case "$resp" in
-	n*)
-		;;
-	*)
-		intf=
-		while [ "$intf" = "" ]; do
-			echo -n "What is the primary interface name "
-			echo -n "(e.g. ed0, ep0, etc)? "
-			read intf
-		done
-		echo -n "What is the hostname for this interface? [$hname] "
-		read ifname
-		if [ "$ifname" = "" ]; then
-			ifname=$hname
-		fi
-		ifaddr=
-		while [ "$ifaddr" = "" ]; do
-			echo -n "What is the IP address associated with "
-			echo -n "interface ${intf}? "
-			read ifaddr
-		done
-		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
-		    >> ${ETC}/hosts
-
-		echo -n "Does this interface have a special netmask? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What is the netmask? [0xffffff00] "
-				read ifnetmask
-				if [ "$ifnetmask" = "" ]; then
-					ifnetmask=0xffffff00
-				fi
-				;;
-			*)
-				ifnetmask=
-				;;
-		esac
-
-		echo -n "Does this interface need additional flags? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What flags? [link0] "
-				read ifflags
-				if [ "$ifflags" = "" ]; then
-					ifflags=link0
-				fi
-				;;
-			*)
-				ifflags=
-				;;
-		esac
-		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
-
-		echo    ""
-		echo -n	"WARNING: if you have any more ethernet interfaces, "
-		echo	"you will have to configure"
-		echo -n "them by hand.  Read the comments in /etc/netstart to "
-		echo	"learn how to do this."
-		;;
-	esac
-	
-	echo	""
-	echo -n	"Making device nodes (may take a while)..."
-	cd ${DEV}
-	sh MAKEDEV all
-	echo	" done."
-
-	sync
-
-	echo	""
-	echo	"If you haven't already installed a kernel on the hard drive"
-	echo	"using your kernel-copy floppy, do so now.  Kernel"
-	echo 	"installation instructions can be found in the"
-	echo 	"installation notes."	
-}
diff --git a/distrib/i386/floppies/ramdisk/instbin.conf b/distrib/i386/floppies/ramdisk/instbin.conf
index e3eacd30ae0..37becc192e0 100644
--- a/distrib/i386/floppies/ramdisk/instbin.conf
+++ b/distrib/i386/floppies/ramdisk/instbin.conf
@@ -1,4 +1,4 @@
-#	$OpenBSD: instbin.conf,v 1.8 1997/05/07 06:03:26 deraadt Exp $
+#	$OpenBSD: instbin.conf,v 1.9 1997/05/08 05:56:23 tholo Exp $
 #
 # instbin.conf - unified binary for the inst/upgr floppies
 #
@@ -11,7 +11,7 @@ progs expr fsck_ffs ftp fdisk hostname
 progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
 progs mount_ffs mount_msdos mount_nfs mount_kernfs mount_ext2fs
 progs mv newfs pax pdksh ping pppd pwd reboot rm route build
-progs scsi sed shutdown sleep stty sync test tip umount
+progs scsi sed slattach sleep stty sync test tip umount
 progs rsh restore gzip sort grep cut
 
 ln chown chgrp
diff --git a/distrib/i386/floppies/ramdisk/list b/distrib/i386/floppies/ramdisk/list
index 13a1b1f3d19..af8a46c0ffb 100644
--- a/distrib/i386/floppies/ramdisk/list
+++ b/distrib/i386/floppies/ramdisk/list
@@ -1,12 +1,92 @@
-#	$OpenBSD: list,v 1.4 1997/05/03 07:50:16 tholo Exp $
+#	$OpenBSD: list,v 1.5 1997/05/08 05:56:23 tholo Exp $
 
-# the disktab explanation file
-COPY	disktab.preinstall		etc/disktab.preinstall
+# copy the crunched binary, link to it, and kill it
+COPY	${OBJDIR}/instbin	instbin
+LINK	instbin			bin/cat
+LINK	instbin			bin/chmod
+LINK	instbin			bin/cp
+LINK	instbin			bin/cpio bin/pax bin/tar
+LINK	instbin			bin/dd
+LINK	instbin			bin/df
+LINK	instbin			bin/ed
+LINK	instbin			bin/expr
+LINK	instbin			bin/hostname
+LINK	instbin			bin/ln
+LINK	instbin			bin/ls
+LINK	instbin			bin/mkdir
+LINK	instbin			bin/mv
+LINK	instbin			bin/pwd
+LINK	instbin			bin/rm
+LINK	instbin			bin/sh bin/pdksh
+LINK	instbin			bin/sleep
+LINK	instbin			bin/stty
+LINK	instbin			bin/sync
+LINK	instbin			bin/test bin/[
+LINK	instbin			sbin/disklabel
+LINK	instbin			sbin/fdisk
+LINK	instbin			sbin/fsck sbin/fsck_ffs
+LINK	instbin			sbin/halt sbin/reboot
+LINK	instbin			sbin/ifconfig
+LINK	instbin			sbin/init
+LINK	instbin			sbin/mknod
+LINK	instbin			sbin/mount
+LINK	instbin			sbin/mount_cd9660
+LINK	instbin			sbin/mount_ffs
+LINK	instbin			sbin/mount_msdos
+LINK	instbin			sbin/mount_nfs
+LINK	instbin			sbin/mount_kernfs
+LINK	instbin			sbin/mount_ext2fs
+LINK	instbin			sbin/newfs sbin/mount_mfs
+LINK	instbin			sbin/ping
+LINK	instbin			sbin/restore
+LINK	instbin			sbin/route
+LINK	instbin			sbin/slattach
+LINK	instbin			sbin/scsi
+LINK	instbin			sbin/umount
+SYMLINK	/bin/cat		usr/bin/cut
+SYMLINK	/bin/cat		usr/bin/egrep usr/bin/fgrep usr/bin/grep
+SYMLINK	/bin/cat		usr/bin/ftp
+SYMLINK	/bin/cat		usr/bin/gzip usr/bin/gunzip usr/bin/gzcat
+SYMLINK	/bin/cat		usr/bin/less usr/bin/more
+SYMLINK	/bin/cat		usr/bin/rsh
+SYMLINK	/bin/cat		usr/bin/sed
+SYMLINK	/bin/cat		usr/bin/sort
+SYMLINK	/bin/cat		usr/bin/tip
+SYMLINK /bin/cat		usr/bin/vi
+SYMLINK	/bin/cat		usr/sbin/bad144
+SYMLINK	/bin/cat		usr/sbin/chat
+SYMLINK	/bin/cat		usr/sbin/chown usr/sbin/chgrp
+SYMLINK	/bin/cat		usr/sbin/pppd
+SPECIAL	/bin/rm instbin
+
+# `internal' crunchgen links
+ARGVLINK sh		-sh
+
+# copy the MAKEDEV script and make some devices
+COPY	${DESTDIR}/dev/MAKEDEV	dev/MAKEDEV
+SPECIAL	cd dev; sh MAKEDEV ramdisk
+SPECIAL	/bin/rm dev/MAKEDEV
+
+# we need the contents of /usr/mdec
+COPY	${DESTDIR}/usr/mdec/bootsd	usr/mdec/bootsd
+COPY	${DESTDIR}/usr/mdec/sdboot	usr/mdec/sdboot
+LINK	usr/mdec/bootsd			usr/mdec/bootwd
+LINK	usr/mdec/sdboot			usr/mdec/wdboot
+
+# various files that we need in /etc for the install
+COPY	${DESTDIR}/etc/group		etc/group
+COPY	${DESTDIR}/etc/protocols	etc/protocols
+COPY	${DESTDIR}/etc/services		etc/services
+COPY	${DESTDIR}/etc/spwd.db		etc/spwd.db
+
+COPYDIR	${DESTDIR}/etc/ppp		etc/ppp
+
+# and the common installation tools
+COPY	${CURDIR}/termcap.pc3	usr/share/misc/termcap
+COPY	${DESTDIR}/usr/share/misc/scsi_modes	usr/share/misc/scsi_modes
 
 # and the installation tools
 COPY	dot.profile			.profile
-COPY	dot.instutils			.instutils
-COPY	resolv.conf			etc/resolv.conf
 COPY	install.md			install.md
 COPY	${CURDIR}/../../../miniroot/install.sh		install
 COPY	${CURDIR}/../../../miniroot/upgrade.sh		upgrade
diff --git a/distrib/i386/floppies/ramdisk/list_floppy b/distrib/i386/floppies/ramdisk/list_floppy
index e990fec54e6..cb425fda541 100644
--- a/distrib/i386/floppies/ramdisk/list_floppy
+++ b/distrib/i386/floppies/ramdisk/list_floppy
@@ -1,4 +1,5 @@
-#       $OpenBSD: list_floppy,v 1.2 1997/04/16 21:37:43 deraadt Exp $
+#       $OpenBSD: list_floppy,v 1.3 1997/05/08 05:56:24 tholo Exp $
 
 COPY	${DESTDIR}/usr/mdec/boot	boot
+SPECIAL	strip boot
 COPY	${OBJDIR}/bsd.gz		bsd
diff --git a/distrib/i386/floppies/ramdisk/resolv.conf b/distrib/i386/floppies/ramdisk/resolv.conf
deleted file mode 100644
index d5d77fdff80..00000000000
--- a/distrib/i386/floppies/ramdisk/resolv.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-domain openbsd.org
-nameserver 146.228.10.16
-nameserver 18.26.0.9
-nameserver 128.138.243.151
-nameserver 193.196.32.1
-nameserver 192.71.220.10
-lookup file bind
diff --git a/distrib/i386/floppies/ramdisk/termcap.pc3 b/distrib/i386/floppies/ramdisk/termcap.pc3
new file mode 100644
index 00000000000..437a1bd4b88
--- /dev/null
+++ b/distrib/i386/floppies/ramdisk/termcap.pc3
@@ -0,0 +1,45 @@
+#	$OpenBSD: termcap.pc3,v 1.1 1997/05/08 05:56:25 tholo Exp $
+#
+# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by the University of
+#	California, Berkeley and its contributors.
+# 4. Neither the name of the University nor the names of its contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+#	@(#)termcap.src	5.109 (Berkeley) 3/8/93
+#
+pc3|ibmpc3|IBM PC BSD/386 Console:\
+	:am:bs:bw:eo:km:xo:\
+	:Co#8:co#80:it#8:li#25:pa#64:\
+	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+	:Sb=\E[4%dm:Sf=\E[3%dm:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:\
+	:ce=\E[K:cl=\Ec:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:\
+	:kH=\E[F:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:\
+	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+	:mh=\E[=8F:mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[x:rc=\E8:sc=\E7:\
+	:se=\E[0m:sf=^J:so=\E[7m:ta=^I:up=\E[A: