Stub out mvmeppc install.md as it currently is

a) Completely wrong since mvmeppc never did support MacOS/HFS.

b) Unused, as the mvmeppc port is in 'limbo'.

c) In need of a complete re-write when mvmeppc comes out of limbo.

d) An exact duplicate of macppc/ramdisk/install.md, i.e. without
any independant imbedded knowledge.

ok miod@.

1 files changed, 1 insertions, 262 deletions

diff --git a/distrib/mvmeppc/ramdisk/install.md b/distrib/mvmeppc/ramdisk/install.md
index 5bab3309052..8453c1589cc 100644
--- a/distrib/mvmeppc/ramdisk/install.md
+++ b/distrib/mvmeppc/ramdisk/install.md
@@ -1,4 +1,4 @@
-#	$OpenBSD: install.md,v 1.20 2003/09/22 01:31:39 krw Exp $
+#	$OpenBSD: install.md,v 1.21 2003/09/28 23:19:43 krw Exp $
 #
 #
 # Copyright (c) 1996 The NetBSD Foundation, Inc.
@@ -39,277 +39,16 @@
 # machine dependent section of installation/upgrade script.
 #
 
-MDTERM=vt100
-MDFSTYPE=msdos
 ARCH=ARCH
 
 md_set_term() {
 }
 
 md_installboot() {
-	local _disk=$1
-
-	case $disklabeltype in
-	HFS)	cat << __EOT
-The 'ofwboot' program needs to be copied to the first HFS partition of $_disk
-to allow booting of OpenBSD.
-__EOT
-		;;
-
-	MBR)	echo "Installing boot in the msdos partition ${_disk}i"
-		if mount -t msdos /dev/${_disk}i /mnt2 ; then
-			cp /usr/mdec/ofwboot /mnt2
-			umount /mnt2
-		else
-			echo "Failed, you will not be able to boot from $_disk."
-		fi
-		;;
-	esac
-}
-
-md_init_mbr() {
-	local _disk=$1
-
-	cat << __EOT
-
-You will now be asked if you want to initialize $_disk with a 1MB MSDOS
-partition. This is the recommended setup and will allow you to store the boot
-and other interesting things here.
-
-If you want to have a different setup, exit 'install' now and do the MBR
-initialization by hand using the 'fdisk' program.
-
-If you choose to manually setup the MSDOS partition, consult your PowerPC
-OpenFirmware manual -and- the PowerPC OpenBSD Installation Guide for doing
-setup this way.
-
-__EOT
-	ask_yn "Do you want to initialize the MBR and the MSDOS partition?" yes
-	[[ $resp == n ]] && exit
-
-	cat << __EOT
-An MBR record with an OpenBSD usable partition table will now be copied to your
-disk. Unless you have special requirements, you will not need to edit this MBR.
-After the MBR is copied an empty 1MB MSDOS partition will be created on the
-disk. You *MUST* setup the OpenBSD disklabel to have a partition include this
-MSDOS partition. You will have an opportunity to do this shortly.
-
-You will probably see a few '...: no disk label' messages. It's completely
-normal. The disk has no label yet. This may take a minute or two...
-__EOT
-	sleep 2
-
-	echo -n "Creating Master Boot Record (MBR)..."
-	fdisk -i -f /usr/mdec/mbr $_disk
-	echo "done."
-
-	echo -n "Copying 1MB MSDOS partition to disk..."
-	gunzip < /usr/mdec/msdos1mb.gz | dd of=/dev/r${_disk}c bs=512 seek=1 >/dev/null 2>&1
-	echo "done."
-}
-
-md_checkfordisklabel() {
-	local rval _disk=$1
-
-	cat << __EOT
-
-Apple systems have two methods to label/partition a boot disk.
-
-Either the disk can be partitioned with Apple HFS partition tools to contain an
-"Unused" partition, or without any MacOS tools, the disk can be labeled using
-an MBR partition table.
-
-If the HFS (DPME) partition table is used, after the disk is partitioned with
-the Apple software, the "Unused" section must be changed to type "OpenBSD" name
-"OpenBSD" using the pdisk tool contained on this ramdisk. The disklabel can
-then be edited normally.
-
-WARNING: the MBR partitioning code will HAPPILY overwrite/destroy any HFS
-         partitions on the disk, including the partition table. Choose the
-         MBR option carefully, knowing this fact.
-__EOT
-
-	ask "Do you want to use (H)FS labeling or (M)BR labeling" H
-	case $resp in
-	m*|M*)	export disklabeltype=MBR
-		md_checkforMBRdisklabel $_disk
-		rval=$?
-		;;
-	*)	export disklabeltype=HFS
-		pdisk /dev/${_disk}c
-		rval=$?
-		;;
-	esac
-	return $rval
-}
-
-md_checkforMBRdisklabel() {
-	local _disk=$1 rval=0
-
-	ask_yn "Are you *sure* you want to put a MBR disklabel on the disk?"
-	[[ $resp == n ]] && exit
-
-	ask_yn "Have you initialized an MSDOS partition using OpenFirmware?"
-	case $resp in
-	n)	md_init_mbr $_disk;;
-	y)	cat << __EOT
-You may keep your current setup if you want to be able to use any already
-loaded OS. However you will be asked to prepare an empty partition for OpenBSD
-later. There must also be at least ~0.5MB free space in the boot partition to
-hold the OpenBSD bootloader.
-
-Also note that the boot partition must be included as partition 'i' in the
-OpenBSD disklabel.
-
-__EOT
-		ask_yn "Keep the current MSDOS partition setup?" yes
-		[[ $resp == n ]] && md_init_mbr $_disk
-		;;
-	esac
-
-	disklabel -r $_disk >/dev/null 2>/tmp/checkfordisklabel
-
-	if grep "no disk label" /tmp/checkfordisklabel; then
-		rval=1
-	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
-		rval=2
-	fi >/dev/null 2>&1
-
-	rm -f /tmp/checkfordisklabel
-	return $rval
-}
-
-md_prep_fdisk() {
-	local _disk=$1
-
-	cat << __EOT
-
-This disk has not previously been used with OpenBSD. You may share this disk
-with other operating systems. However, to be able to boot the system you will
-need a small DOS partition in the beginning of the disk to hold the kernel
-boot. OpenFirmware understands how to read an MSDOS style format from the disk.
-
-This DOS style partitioning has been taken care of if you chose to do that
-initialization earlier in the install.
-
-WARNING: Wrong information in the BIOS partition table might render the disk
-         unusable.
-__EOT
-
-	ask "Press [Enter] to continue"
-
-	echo "\nCurrent partition information is:"
-	fdisk $_disk
-	ask "Press [Enter] to continue"
-
-	while : ; do
-		cat << __EOT
-
-An OpenBSD partition should have a type (id) of 166 (A6), and should be the
-only partition marked as active. Also make sure that the size of the partition
-to be used by OpenBSD is correct, otherwise OpenBSD disklabel installation will
-fail. Furthermore, the partitions must NOT overlap each others.
-
-The fdisk utility will be started update mode (interactive.) You will be able
-to add / modify this information as needed. If you make a mistake, simply exit
-fdisk without storing the new information, and you will be allowed to start
-over.
-
-__EOT
-		ask "Press [Enter] to continue"
-
-		fdisk -e $_disk
-		cat << __EOT
-
-The new partition information is:
-
-$(fdisk $_disk)
-
-(You will be permitted to edit this information again.)
--------------------------------------------------------
-__EOT
-		ask_yn "Is the above information correct?"
-		[[ $resp == y ]] && break
-	done
-
-	cat << __EOT
-
-Please take note of the offset and size of the OpenBSD partition *AND* the
-MSDOS partitions you may want to access from OpenBSD. At least the MSDOS
-partition used for booting must be accessible by OpenBSD as partition 'i'. You
-may need this information to fill in the OpenBSD disklabel later.
-
-__EOT
-	ask "Press [Enter] to continue"
 }
 
 md_prep_disklabel() {
-	local _disk=$1 _q
-
-	md_checkfordisklabel $_disk
-	case $? in
-	0)	_q="Do you wish to edit the existing disklabel on $_disk?"
-		;;
-	1)	md_prep_fdisk $_disk
-		echo "WARNING: $_disk has no label"
-		_q="Do you want to create one with the disklabel editor?"
-		;;
-	2)	echo "WARNING: The disklabel on $_disk is invalid."
-		_q="Do you want to try and repair the damage using the disklabel editor?"
-		;;
-	esac
-
-	if [[ -n $_q ]]; then
-		ask_yn "$_q" yes
-		[[ $resp == n ]] && return
-	fi
-
-	# display example
-	cat << __EOT
-
-Disk partition sizes and offsets are in sector (most likely 512 bytes) units.
-You may set these size/offset pairs on cylinder boundaries
-     (the number of sector per cylinder is given in )
-     (the 'sectors/cylinder' entry, which is not shown here)
-Also, you *must* make sure that the 'i' partition points at the MSDOS partition
-that will be used for booting. The 'c' partition shall start at offset 0 and
-include the entire disk. This is most likely correct when you see the default
-label in the editor.
-
-Do not change any parameters except the partition layout and the label name.
-
-   [Here is an example of what the partition information may look like.]
-10 partitions:
-#        size   offset    fstype   [fsize bsize   cpg]
-  a:   120832    10240    4.2BSD     1024  8192    16   # (Cyl.   11*- 142*)
-  b:   131072   131072      swap                        # (Cyl.  142*- 284*)
-  c:  6265200        0    unused     1024  8192         # (Cyl.    0 - 6809)
-  e:   781250   262144    4.2BSD     1024  8192    16   # (Cyl.  284*- 1134*)
-  f:  1205000  1043394    4.2BSD     1024  8192    16   # (Cyl. 1134*- 2443*)
-  g:  2008403  2248394    4.2BSD     1024  8192    16   # (Cyl. 2443*- 4626*)
-  h:  2008403  4256797    4.2BSD     1024  8192    16   # (Cyl. 4626*- 6809*)
-  i:    10208       32     MSDOS                        # (Cyl.    0*- 11*)
-[End of example]
-__EOT
-	ask "Press [Enter] to continue"
-
-	if [[ $disklabeltype == HFS ]]; then
-		disklabel -c -f /tmp/fstab.$_disk -E $_disk
-	elif [[ $disklabeltype == MBR ]]; then
-		disklabel -W $_disk
-		disklabel $_disk >/tmp/label.$$
-		disklabel -r -R $_disk /tmp/label.$$
-		rm -f /tmp/label.$$
-		disklabel -f /tmp/fstab.$_disk -E $_disk
-	else
-		echo "unknown disk label type"
-	fi
 }
 
 md_congrats() {
-	cat << __EOT
-
-Once the machine has rebooted use Open Firmware to boot into OpenBSD, as
-described in the install document.
-__EOT
 }