initial import of NetBSD tree

8 files changed, 895 insertions, 0 deletions

diff --git a/distrib/notes/amiga/contents b/distrib/notes/amiga/contents
new file mode 100644
index 00000000000..2c728e54e55
--- /dev/null
+++ b/distrib/notes/amiga/contents
@@ -0,0 +1,141 @@
+The amiga-specific portion of the NetBSD 1.1 release is found in the
+"amiga" subdirectory of the distribution.  That subdirectory is layed
+out as follows:
+
+.../NetBSD-1.1/amiga/
+			binary/		amiga binary distribution sets;
+					see below.
+
+			floppies/	amiga installation and upgrade
+>>>                     ^^^^^^^^ should this be miniroot/?
+					file system images; see below.
+
+			security/	amiga security distribution;
+					see below;
+
+			utils/		Miscellaneous amiga
+					installation utilities; see
+					installation section, below.
+
+There are two amiga file system images to be found in the "amiga/floppy"
+>>>                                                              ^^^^^^
+subdirectory of the NetBSD 1.1 distribution.  One of them is a upgrade
+image and one is an installation image. They are described in more
+detail below.  There are gzipped versions of each available, for easier
+downloading.  (The gzipped version have the ".gz" extension added to
+their names.)
+
+Installation file system:
+
+	This file contains a BSD root file system setup to help
+	you install the rest of NetBSD.  This includes formatting
+	and mounting your root and /usr partitions and getting
+	ready to extract (and possibly first fetching) the distribution
+	sets.  There is enough on this file system to allow you to
+	make a slip or ppp connection, configure an ethernet, mount an
+	NFS file system or ftp.  You can also load distribution sets from
+	a SCSI tape or from one of your existing AmigaDOS partitions.
+
+	This file is named "inst-11.fs".
+
+
+Upgrade file system:
+
+	This file contains a BSD root file system setup to help
+	you upgrade a previous version of NetBSD.  This includes
+	converting existing partitions
+	and mounting your root and /usr partitions and getting
+	ready to extract (and possibly first fetching) the distribution
+	sets.  There is enough on this file system to allow you to
+	make a slip or ppp connection, configure an ethernet, mount an
+	NFS file system or ftp.  You can also load distribution sets from
+	a SCSI tape, from one of your existing AmigaDOS partitions, or
+	from an existing NetBSD partition.
+
+	This file is named "inst-11.fs".
+
+The NetBSD/amiga binary distribution sets contain the binaries which
+comprise the NetBSD 1.1 release for the amiga.  There are seven binary
+distribution sets, and the "security" distribution set.  The binary
+distribution sets can be found in subdirectories of the "amiga/binary"
+subdirectory of the NetBSD 1.1 distribution tree, and are as follows:
+
+	base11	The NetBSD/amiga 1.1 base binary distribution.  You
+		MUST install this distribution set.  It contains the
+		base NetBSD utilities that are necessary for the
+		system to run and be minimally functional.  It
+		includes shared library support, and excludes
+		everything described below.
+		[ 7M gzipped, 19M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	comp11	The NetBSD/amiga Compiler tools.  All of the tools
+		relating to C, C++, and FORTRAN (yes, there are two!).
+		This set includes the system include files
+		(/usr/include), the linker, the compiler tool chain,
+		and the various system libraries (except the shared
+		libraries, which are included as part of the base
+		set).  This set also includes the manual pages for all
+		of the utilities it contains, as well as the system
+		call and library manual pages.
+		[ 4M gzipped, 12M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	etc11	This distribution set contains the system
+		configuration files that reside in /etc and in several
+		other places.  This set MUST be installed if you are
+		installing the system from scratch, but should NOT be
+		used if you are upgrading.  (If you are upgrading,
+		it's recommended that you get a copy of this set and
+		CAREFULLY upgrade your configuration files by hand.)
+		[ 50K gzipped, 280K uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	games11	This set includes the games and their manual pages.
+		[ 1M gzipped, 3M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	man11	This set includes all of the manual pages for the
+		binaries and other software contained in the base set.
+		Note that it does not include any of the manual pages
+		that are included in the other sets.
+		[ 730K gzipped, 3M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	misc11	This set includes the system dictionaries (which are
+		rather large), the typesettable document set, and
+		man pages for other architectures which happen to be
+		installed from the source tree by default.
+		[ 2M gzipped, 6M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	text11	This set includes NetBSD's text processing tools,
+		including groff, all related programs, and their
+		manual pages.
+		[ 784K gzipped, 3M uncompressed ]
+>>>               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The amiga security distribution set is named "secr11" and can be found
+in the "amiga/security" subdirectory of the NetBSD 1.1 distribution
+tree.  It contains crypt.c (the source file for the DES encryption
+algorithm) and the binaries which depend on it.  It can only be found
+on those sites which carry the complete NetBSD distribution and that
+can legally obtain it.  (Remember, because of United States law, this
+distribution set may not be exported to locations outside of the
+United States and Canada.)  [ 119K gzipped, 300K uncompressed ]
+>>>                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The amiga binary distribution sets are distributed in the same form as
+the source distribution sets; catted together, the members of a set
+form a gzipped tar file.  Each amiga binary distribution set also has
+its own "CKSUMS" file, just as the source distribution sets do.
+
+The instructions given for extracting the source sets work equally
+well for the binary sets, but it is worth noting that if you use that
+method, the files are extracted "below" the current directory.  That
+is, if you want to extract the binaries "into" your system, i.e.
+replace the system binaries with them, you have to run the "tar xvfp"
+from /.  Also note that if you upgrade or install this way, those
+programs that you are using at the time will NOT be replaced.  If you
+follow the normal installation or upgrade procedures, this will be
+taken care of for you.
diff --git a/distrib/notes/amiga/hardware b/distrib/notes/amiga/hardware
new file mode 100644
index 00000000000..513236ac7cd
--- /dev/null
+++ b/distrib/notes/amiga/hardware
@@ -0,0 +1,58 @@
+NetBSD/amiga 1.1 runs on any amiga that has a 68020 or better CPU
+with some form of FPU and MMU.  The minimal configuration requires
+4M of RAM and about 65M of disk space.  To install the entire system
+>>>                 ^^^
+requires much more disk space, and to run X or compile the system,
+more RAM is recommended.  (4M of RAM will actually allow you to
+compile, however it won't be speedy.  X really isn't usable on a
+4M system)
+
+Here is a table of recommended HD partition sizes for a full install:
+	partition:	advise,	with X,	needed,	with X
+	root (/)	15M	15M	10M	10M
+	user (/usr)	65M	100M	45M 	80M
+	swap		----- 2M for every M ram -----
+	local (/local)	up to you
+>>> adjust sizes?
+
+As you may note the recommended size of /usr is 20M greater than
+needed. This is to leave room for a kernel source and compile tree
+as you will probably want to compile your own kernel. (GENERIC is
+large and bulky to accommodate all people).
+
+Supported devices include:
+	A4000/A1200 IDE controller.
+	SCSI host adapters:
+		33c93 based boards: A2091, A3000 and GVP series II.
+		53c80 based boards: 12 Gauge, IVS and Wordsync/Bytesync.
+		53c710 based boards: A4091, Magnum, Warp Engine and Zeus.
+		FAS216 based boards: FastLane Z3, Blizzard.
+	Video controllers:
+		ECS, AGA and A2024 built in on various amigas.
+		Retina Z2 and Retina Z3.
+		Picasso II.
+		GVP Spectrum.
+		Piccalo.
+		A2410.
+	Ethernet controllers:
+		A2065 Ethernet
+		Hydra Ethernet
+		ASDG Ethernet
+		A4066 Ethernet
+		Ariadne Ethernet
+	Arcnet controllers:
+		A2060 Arcnet
+	Tape drives:
+		Most SCSI tape drives, including
+			Archive Viper, Cipher SCSI-2 ST150.
+	CD-ROM drives:
+		Most SCSI CD-ROM drives
+	Serial cards:
+		MultiFaceCard II and III
+		A2232
+	Amiga floppy drives.
+	Amiga parallel port.
+	Amiga serial port.
+	Amiga mouse.
+
+If its not on this list, there is no support for it in this release.
diff --git a/distrib/notes/amiga/install b/distrib/notes/amiga/install
new file mode 100644
index 00000000000..5b73f335e75
--- /dev/null
+++ b/distrib/notes/amiga/install
@@ -0,0 +1,314 @@
+Installing NetBSD is a relatively complex process, but, if you have
+this document in hand and are careful to read and remember the
+information which is presented to you by the install program, it
+shouldn't be too much trouble.
+
+Before you begin, you must have already prepared your hard disk as
+detailed in the section on preparing your system for install.
+
+The following is a walk-through of the steps necessary to get NetBSD
+installed on your hard disk.  If you wish to stop the installation,
+you may hit Control-C at any prompt, but if you do, you'll have to
+begin again from scratch.
+
+>>>	transfer installation file system to the swap partition.
+>>>	Does this go here, or in the hard disk prep section?
+
+>>>	Getting loadbsd, ixemul.library, and netbsd onto AmigaDOS
+>>>	partition.
+	Next you need to get yourself into NetBSD by loading the
+	kernel from AmigaDOS with loadbsd like so:
+
+		loadbsd -b netbsd
+
+	You should see the screen clear and some information about
+	your system as the kernel configures the hardware.  Note which
+	hard disk device(s) are configured (sd0, sd1, etc).  Then
+	you will be prompted for a root device.  At this time type
+	'sd0*'.
+>>>	Need to document what device number to actually use.
+
+	The system should continue to boot.  For now ignore WARNING:
+	messages about bad dates in clocks and swap space.  Eventually
+>>>	                                       ^^^^^^^^^^???
+	you will be asked to enter the pathname of the shell, just
+	hit return.  After a short while you should see a welcome
+	message and a prompt, asking if you wish to proceed with the
+	installation.
+
+	If you wish to proceed, enter "y" and then return.
+
+	If you have configured your hard drive[s] correctly it
+	should find the drive and partition that you selected to
+	use as your root.
+
+	YOU ARE NOW AT THE POINT OF NO RETURN.  If you confirm that
+	you want to install NetBSD, your hard drive will be modified,
+	and perhaps its contents scrambled at the whim of the install
+	program.
+
+	If you are sure you want to proceed, enter "yes" at the
+	prompt.
+
+	The install program will now make the root filesystem you
+	specified.  There should be only one error in this section
+	of the installation.  It will look like so:
+
+		newfs: ioctl (WDINFO): Invalid argument
+		newfs: /dev/rsd0a: can't rewrite disk label
+
+	If there are any others, restart from the the beginning of
+	the installation process.  This error is ok as the Amiga
+	does not write disklabels currently.  You should expect
+	this error whenever using newfs.
+
+	Next the install program will ask you which drive and
+	partition you wish to use as /usr.  First it will list the
+	available drives.  Choose one.  Next it will give you a
+	list of the partitions on that disk along with their sizes,
+	types, etc..  Choose the letter that corresponds to the
+	partition you wish to use for /usr.  If you are doing a
+	full install this should be at the very least 45M-50M large.
+	If everything is ok the install program will then format
+	and mount your /usr.  If not then it will ask again for a
+	drive and partition.
+
+	When this completes your root partition will be mounted on
+	/mnt and your /usr partition on /mnt/usr.  An fstab will
+	have been created and initialized to correctly mount these
+	two file systems.  This fstab will be in /mnt/etc.
+
+	What you do from this point on depends on which media you're
+	using to install NetBSD.  Follow the appropriate instructions,
+	given below.
+
+	To install from an AmigaDOS partition:
+
+		You first need to mount the AmigaDOS partition
+		using the mount_ados command.  If e.g. your AmigaDOS
+		partition is the first partition on sd0 you could
+		type:
+			
+			mkdir /mnt/ados
+			mount_ados /dev/sd0d /mnt/ados
+
+		You can use `disklabel sd0' to find out what types
+		of partitions are on the disk `sd0'.
+
+		Next goto the directory in which you stored the
+		distribution sets.  If e.g. you stored them in the
+		root directory of the partition:
+
+			cd /mnt/ados
+
+		When there, run "Set_tmp_dir" and choose the default
+		temporary directory, by hitting return at the
+		prompt.
+
+		Run the "Extract" command, giving it as its sole
+		argument the name of the distribution set you wish
+		to extract.  For example, to extract the base
+		distribution, use the command:
+
+			Extract base11
+
+		and to extract the games distribution:
+
+			Extract game11
+
+		If the distribution sets are in different directories,
+		you will need to cd to each directory in turn, runing
+		"Set_tmp_dir" and the appropriate "Extract" command(s).
+
+		Continue this process until you've finished installing
+		all of the sets which you desire to have on your
+		hard disk.  Once you have extracted all sets and
+		are at the "#" prompt again, proceed to the section
+		"Configuring Your System," below.
+
+	To install from tape:
+
+		The first thing you should do is pick a temporary
+		directory where the distribution files can be stored.
+		To do this, use the command "Set_tmp_dir" and enter
+		your choice.  The default is /mnt/usr/distrib.
+
+		After you have picked a temporary directory,
+		you should issue the load command:
+
+			Load_tape
+
+		Next, you will be told to insert the media into
+		the appropriate drive, and hit return.  Continue
+		to follow instructions until you are returned to
+		the "#" prompt.
+
+		Go to the directory which contains the first
+		distribution set you wish to install.  This is
+		either the directory you specified above, or possibly
+		a subdirectory of that directory.
+
+		When there, run "Set_tmp_dir" again, and choose
+		the default temporary directory, by hitting
+		return at the prompt.
+
+		Run the "Extract" command, giving it as its sole
+		argument the name of the distribution set you
+		wish to extract.  For example, to extract the base
+		distribution, use the command:
+
+			Extract base11
+
+		and to extract the games distribution:
+
+			Extract game11
+
+		After the extraction is complete, go to the location
+		of the next set you want to extract, "Set_tmp_dir"
+		again, and once again issue the appropriate
+		extract command.  Continue this process until
+		you've finished installing all of the sets which you
+		desire to have on your hard disk.
+
+		After each set is finished, if you know that you
+		are running low on space you can remove the
+		distribution files for that set by saying:
+
+			rm set_name.??
+
+		For example, if you wish to remove the distribution
+		files for the game09 set, after the "Extract game09"
+		command has completed, issue the command:
+
+			rm game11.??
+
+		Once you have extracted all sets and are at the "#" prompt
+		again, proceed to the section "Configuring Your System,"
+		below.
+
+	To install via FTP or NFS:
+
+		First, use Set_tmp_dir to pick a temporary directory
+		for the installation files.  /mnt/usr/distrib is
+		suggested.
+
+>>> Document using ppp or slip?
+		Configure the appropriate ethernet interface i.e. le0
+		if you have a 2065 or ed0 if you have a AMIGNET from
+		Hydra Systems.
+		
+			ifconfig <ifname> <ipaddr> [netmask <netmask>]
+
+		where <ifname> is the interface name (e.g. ed0, etc.),
+		and <ipaddr> is the numeric IP address of the interface.
+		If the interface has a special netmask, supply
+		the word "netmask" and that netmask at the end of the
+		command line.  For instance, without a special netmask:
+
+			ifconfig ed0 129.133.10.10
+
+		or with a special netmask
+
+			ifconfig ed0 128.32.240.167 netmask 0xffffff00
+
+		If the NFS server or FTP server is not on a directly-
+		connected network, you should set up a route to it
+		with the command:
+
+			route add default <gate_ipaddr>
+
+		where <gate_ipaddr> is your gateway's numeric IP address.
+
+		If you are NFS-mounting the distribution sets,
+		mount them on the temporary directory with the command:
+
+			mount -t nfs <serv_ipaddr>:<dist_dir> <tmp_dir>
+
+		where <serv_ipaddr> is the server's numeric IP address,
+		<dist_dir> is the path to the distribution files on
+		the server, and <tmp_dir> is the name of the local
+		temporary directory.
+
+		Once this is done, proceed as if you had loaded the
+		files from tape, "cd"ing to the appropriate directories
+		and running "Set_tmp_dir" and "Extract" as appropriate.
+
+		If you are retrieving the distribution sets using ftp,
+		cd into the temp directory, and execute the command:
+
+			ftp <serv_ipaddr>
+
+		where <serv_ipaddr> is once again the server's
+		numeric IP address.  Get the files with FTP,
+		taking care to use binary mode to transfer
+		all files.
+
+		Once you have all of the files for the distribution sets
+		you wish to install, you can proceed using the instructions
+		above as if you had installed the files from a tape.
+
+
+Configuring Your System:
+----------- ---- ------
+
+Once you have finished extracting all of the distribution sets that
+you want on your hard drive and are back at the "#" prompt,
+you are ready to configure your system.
+
+The configuration utility expects that you have installed the base
+system.  If you have not, you will not be able to run it successfully
+(nor will you have a functional system regardless of configuration).
+
+To configure the newly installed operating system, run the
+command "Configure".
+
+Configure will ask for the machine's hostname, domain name, and other
+network configuration information.
+
+Once you have supplied `Configure' all that it requests, your machine
+will be configured well enough that when you reboot it it will
+almost be a completely functional NetBSD system.  Note you should
+ignore the errors from `chown' they will be corrected shortly.
+
+Once you are done with `Configure', halt the system with the "halt"
+command (wait for "halted" to be displayed) and reboot.  Then again
+boot NetBSD this time with the command:
+
+
+	loadbsd netbsd
+
+You need to do your final tweeks now.  First mount your file systems
+like so:
+
+	mount -av
+
+Next you need to re-make your devices to get the ownership correct:
+
+	cd /dev
+	MAKEDEV all
+>>> Is this step still needed? - check on it!
+
+Your system is now complete but not completely configured; you
+should adjust the /etc/sendmail.cf file as necessary to suit your
+site and/or disable sendmail and other network related programs.
+These things can be found in /etc/netstart.  Use vi, if you installed
+the man pages you can type `man vi' or `man ed' for instructions
+on how to use these somewhat non-intuitive editors.
+
+Once you are done with the rest of configuration unmount your file
+systems and halt your system, then reboot:
+
+	cd /
+	umount -av
+	halt
+	<reboot>
+
+Finally you can now boot your system and it will be completely
+functional:
+
+	loadbsd -a netbsd
+
+When it boots off of the hard drive, you will have a complete
+NetBSD system!  CONGRATULATIONS! (You really deserve them!!!)
+
+>>> Missing the step to transfer the netbsd kernel to /
diff --git a/distrib/notes/amiga/legal b/distrib/notes/amiga/legal
new file mode 100644
index 00000000000..2a4b4e547b6
--- /dev/null
+++ b/distrib/notes/amiga/legal
@@ -0,0 +1,7 @@
+	This product includes software developed by Christian E. Hopps.
+
+	This product includes software developed by Timo Rossi
+
+	This product includes software developed by Michael L. Hitch
+
+>>> any others?
diff --git a/distrib/notes/amiga/prep b/distrib/notes/amiga/prep
new file mode 100644
index 00000000000..7e7f8c2919d
--- /dev/null
+++ b/distrib/notes/amiga/prep
@@ -0,0 +1,80 @@
+You will need an AmigaDOS hard drive prep tool to prepare you hard
+drives for use with NetBSD/amiga.  HDToolBox is provided with the
+system software and on floppy installation disks since Release 2.0
+of AmigaDOS so we will provide instructions for its use.
+
+Preparing you hard disk with HDToolBox:
+
+	A full explanation of HDToolBox can be found with your
+	AmigaDOS manuals and is beyond the scope of this document.
+
+	Note you will be modifying your HD's if you mess something 
+	up here you could lose everything on all the drives that 
+	you configure.  It is therefore advised that you:
+
+		Write down your current configurations.  Do this
+		by examining each partition on the drive and the
+		drives parameters (from Change drive type.)
+
+		Back up the partitions you are keeping.
+
+	What you need to do is partition your drives; creating
+	at least root, swap and /usr partitions and possibly at least
+	one more for /local if you have the space.
+
+	This should be done as the HDToolBox manual describes.  One thing
+	to note is that if you are not using a Commodore controller you
+	will need to specify the device your SCSI controller uses e.g.
+	if you have a Warp Engine you would:
+
+		from cli,
+			hdtoolbox warpdrive.device
+
+		from wb set the tooltype,
+			SCSI_DEVICE_NAME=warpdrive.device
+
+	The important things you need to do above and beyond normal
+	partitioning includes (from Partition Drive section):
+
+		Marking all NetBSD partitions as non-bootable.
+
+		Changing the file system parameters of the partitions
+		to NetBSD ones.  This must be done from the
+		partitioning section and `Advanced options' must
+		be enabled.  To Make the needed changes:
+
+		- Click the `Adv. Options' button
+		- Click the `Change filesystem' button
+
+		- Choose `Custom File System'
+		- Turn off `Automount' if on.
+		- Set the dostype to one of these three choices:
+
+			root partition  : 0x4e425207
+			swap partition  : 0x4e425301
+			other partitions: 0x4e425507
+
+		Here `other' refers to other partitions you will
+		format for reading and writing under NetBSD (e.g.
+		/usr)
+
+		Make sure you hit the return key to enter this value
+		as some versions of HDToolBox will forget your entry
+		if you don't.
+
+		- Turn custom boot code off
+		- Set Reserved Blocks start and end to 0.
+		- Click Ok.
+
+		Mask and maxtransfer are not used with NetBSD.
+
+		Until you compile your own kernel your swap partition
+		must exist on the drive that also holds your root
+		partition.
+
+	
+	Once this is done NetBSD/amiga will be able to recognize your
+	disks and which partitions it should use.
+
+>>> Should the miniroot transfer to the swap partition instructions
+>>> go here?
diff --git a/distrib/notes/amiga/upgrade b/distrib/notes/amiga/upgrade
new file mode 100644
index 00000000000..d6fc606e39f
--- /dev/null
+++ b/distrib/notes/amiga/upgrade
@@ -0,0 +1,163 @@
+The upgrade to NetBSD 1.1 is a binary upgrade; it would be prohibitive
+to make users upgrade by compiling and installing the 1.1 sources, and
+it would be very difficult to even compile a set of instructions that
+allowed them to do so.  Because of the various changes to the system,
+the largest being the 64-bit file size support and shared libraries,
+>>> just what are the major differences between 1.0 and 1.1??
+it is impractical to upgrade by recompiling from the sources and
+installing.
+
+>>>  no kernel-copy!
+To do the upgrade, you must have the appropriate kernel-copy floppy
+image on a disk, and the upgr-11.fs floppy image on another.  You must
+>>>
+also have at least the "base11" binary distribution set available,
+so that you can upgrade with it, using one of the upgrade methods
+described above.  Finally, you must have sufficient disk space
+available to install the new binaries.  Since the old binaries are
+being overwritten in place, you only need space for the new binaries,
+which weren't previously on the system.  If you have a few megabytes
+free on each of your root and /usr partitions, you should have enough
+space.
+
+Since upgrading involves replacing the kernel, and most of the system
+binaries, it has the potential to cause data loss.  You are strongly
+advised to BACK UP ANY IMPORTANT DATA ON YOUR DISK, whether on the
+NetBSD partition or on another operating system's partition, before
+beginning the upgrade process.
+
+To upgrade your system, follow the following instructions:
+
+>>>	transfer upgrade file system image to swap partition
+>>>	should this be in the hard disk prep section?
+
+	Boot your machine using of the appropriate kernel-copy floppy.
+	When presented with the boot prompt (the prompt begins with
+	"Boot" and ends with ":-"), hit return.
+
+	While booting, you will probably see several warnings.  You
+	should be warned that no swap space is present, and that
+>>>                              ^^^^^^^^^^^^^^^^^^^^^
+	init(8) cannot find /etc/rc.  Do not be alarmed, these are
+>>>     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+	completely normal.  When you reach the prompt asking you for a
+	shell name, just hit return.
+
+	You will be presented with some information about the upgrade
+	process and a warning message, and will be asked if you wish
+	to proceed with the upgrade process.  If you answer
+	negatively, the upgrade process will stop, and your disk will
+	not be modified.  If you answer affirmatively, the upgrade
+	process will begin, and your disk will be modified.  You may
+	hit Control-C to stop the upgrade process at any time.
+	However, if you hit it at an inopportune moment, your system
+	may be left in an inconsistent (and possibly unusable) state.
+
+	You will be asked if you wish to upgrade your file systems to
+	the new file system format.  If you do, reply affirmatively.
+	If you don't have your file systems upgraded now, you should
+	probably do it manually after the install process is complete,
+	by using "fsck -c 2". Read the fsck(8) manual page for more
+	details.
+>>>  Is this needed for 1.0 to 1.1 upgrade?  Or mention that the upgrade
+>>>  should be done if it wasn't previously done?  [It shouldn't hurt
+>>>  to run through the upgrade steps.]
+
+	The upgrade program will then check your root file system,
+	and, if you approved, will upgrade it to the new file system
+	format.  It will then mount your root file system on /mnt.
+
+	If your file systems are being upgraded, the upgrade script
+	will copy the new fsck(8) program to your hard disk and
+	upgrade your remaining file systems.
+
+	The upgrade program will then mount all of your file systems
+	under /mnt.  (In other words, your root partition will be
+	mounted on /mnt, your /usr partition on /mnt/usr, etc.)
+
+	If you don't already have the NetBSD distribution sets on your
+	disk, look in the installation section for information on how
+	to transfer them to your disk.
+>>> NetBSD or AmigaDOS partitions...
+
+	Once the distribution sets are transferred to your disk,
+	continue here.  (Obviously, if the NetBSD distribution sets
+	are already on your disk, because you've transferred them
+	before starting the upgrade process, you don't need to
+	transfer them again now!)
+
+	After the software has been transferred to the machine (or
+	mounted, in the case of upgrading via NFS), change into the
+	directory containing the "base11" distribution set.  Once you
+	are there, run the "Set_tmp_dir" command, and hit return at
+	the prompt to select the default answer for the temporary
+	directory's path name.  (It should be the path name of the
+	directory that you're in.)
+
+	Run the command "Extract base11" to upgrade the base
+	distribution.
+
+	Repeat the above two steps for all of the sets you wish to
+	upgrade.  (For each, change into the directory containing the
+	set, run "Set_tmp_dir" and accept the default path name, then
+	run the "Extract <setname>" command.)
+
+	If you were previously using the security distribution set,
+	you MUST upgrade to the new version, or you will not be able
+	to log in when the upgrade process is complete.  Similarly, if
+	you were not previously using the security set, you must NOT
+	upgrade to the new version.
+
+	When you are done upgrading all of the distribution sets you
+	wish to upgrade, issue the command "Cleanup".  It will clean
+	up the installation, by remaking some system databases.  When
+	it is complete, you should use "halt" to halt the system.
+
+>>>	transfer new kernel to /
+
+Your system has now been upgraded to NetBSD 1.1.
+
+After a new kernel has been copied to your hard disk, your
+	machine is a complete NetBSD 1.1 system.  However, that
+	doesn't mean that you're finished with the upgrade process.
+	There are several things that you should do, or might have to
+	do, to insure that the system works properly.
+
+	First, if you did not upgrade your file systems to the new
+	file system format during the upgrade process, you may want to
+	do so now, with "fsck -c 2".  If you are unsure about the
+	process, it's suggested that you read the fsck(8) manual page.
+
+	Second, you will probably want to get the etc11 distribution,
+	extract it, and compare its contents with those in your /etc/
+	directory.  You will probably want to replace some of your
+	system configuration files, or incorporate some of the changes
+	in the new versions into yours.
+
+	Third, you will probably want to update the set of device
+	nodes you have in /dev.  If you've changed the contents of
+	/dev by hand, you will need to be careful about this, but if
+	not, you can just cd into /dev, and run the command "sh
+	MAKEDEV all".
+
+	Fourth, you must deal with certain changes in the formats of
+	some of the configuration files.  The most notable change is
+	that the "options" given to many of the file systems in
+	/etc/fstab or by hand have changed, and some of the file
+	systems have changed names.  To find out what the new options
+	are, it's suggested that you read the manual page for the
+	file systems' mount commands, for example mount_nfs(8) for
+	NFS.  (Note that the information for mounts of type "ufs",
+	i.e. Fast File Systems, are contained in the mount(8) man
+	page.)
+>>> Is this needed for 1.0 -> 1.1 upgrade?
+
+	Finally, you will want to delete old binaries that were part
+	of the version of NetBSD that you upgraded from and have since
+	been removed from the NetBSD distribution.  You might also
+	want to recompile any locally-built binaries, to take
+	advantage of the shared libraries.  (Note that any new
+	binaries that you build will be dynamically linked, and
+	therefore take advantage of the shared libraries, by default.
+	For information on how to make statically linked binaries,
+	see the cc(1) and ld(1) manual pages.)
diff --git a/distrib/notes/amiga/whatis b/distrib/notes/amiga/whatis
new file mode 100644
index 00000000000..bff5272d6c1
--- /dev/null
+++ b/distrib/notes/amiga/whatis
@@ -0,0 +1,4 @@
+
+>>> What should go here?
+This is the first public release of NetBSD for the Amiga line of
+computers.
diff --git a/distrib/notes/amiga/xfer b/distrib/notes/amiga/xfer
new file mode 100644
index 00000000000..602b2bb18e1
--- /dev/null
+++ b/distrib/notes/amiga/xfer
@@ -0,0 +1,128 @@
+Installation is supported from several media types, including:
+	AmigaDOS HD partitions
+	Tape
+	NFS partitions
+	FTP
+	NetBSD partitions, if doing an upgrade.
+
+>>> Transfering install/upgrade file system image to swap partition
+No matter what you do, however, you'll need to have one disk handy,
+on which you will put the install floppy image.
+
+All the images are available from the directory "amiga/floppies",
+>>>                                                    ^^^^^^^^
+under the root of the NetBSD tree at your favorite archive site.
+
+If you are using NetBSD/amiga to make the floppies, you should use
+the command dd(1) to write the raw floppy images (.fs files) to
+the disk. To write onto fd0 use:
+
+	dd if=inst-11.fs of=/dev/rfd0a bs=11b
+
+If you are using AmigaDOS to make the floppies, you should
+use the rawwrite utility, provided in the directory
+"amiga/utilities" in the distribution.  To write the image to
+the floppy in df0 use (from cli):
+
+	rawwrite 0 inst-11.fs
+>>> fix above to document file system transfer to swap paritition
+>>> using xstreamtodev
+
+The steps necessary to prepare the distribution sets
+for installation depend on which method of installation
+you choose.  The various methods are explained below.
+
+To prepare for installing via an AmigaDOS partition:
+
+	To install NetBSD from an AmigaDOS partition, you need to
+	get the NetBSD distribution sets you wish to install
+	on your system on to an AmigaDOS partition.  All of the
+	set_name.xx pieces can be placed in a single directory
+	instead of separate ones for each distribution set.  This
+	will also simplify the installation work later on.
+
+	Note where you place the files you will need this later.
+
+	Once you have done this, you can proceed to the next
+	step in the installation process, preparing your hard disk.
+
+To prepare for installing via a tape:
+
+	To install NetBSD from a tape, you need to somehow
+	get the NetBSD filesets you wish to install on
+	your system on to the appropriate kind of tape,
+	in tar format.
+
+	If you're making the tape on a UN*X system, the easiest
+	way to do so is:
+
+		tar cvf <tape_device> <files>
+
+	where "<tape_device>" is the name of the tape device
+	that describes the tape drive you're using (possibly
+	something like /dev/nrst0, but we make no guarantees 8-).
+	If you can't figure it out, ask your system administrator.
+	"<files>" are the names of the "set_name.nnn" files
+	which you want to be placed on the tape.
+
+	Once you have done this, you can proceed to the next
+	step in the installation process, preparing your hard disk.
+
+To prepare for installing via an NFS partition:
+
+	NOTE: this method of installation is recommended
+	      only for those already familiar with using
+	      the BSD network-manipulation commands and
+	      interfaces.  If you aren't, this documentation
+	      should help, but is not intended to be
+	      all-encompassing.
+
+	Place the NetBSD software you wish to install into
+	a directory on an NFS server, and make that directory
+	mountable by the machine which you will be installing
+	NetBSD on.  This will probably require modifying the
+	/etc/exports file of the NFS server and resetting
+	mountd, acts which will require superuser privileges.
+	Note the numeric IP address of the NFS server and of
+	the router closest to the the new NetBSD machine,
+	if the NFS server is not on a network which is
+	directly attached to the NetBSD machine.
+
+	Once you have done this, you can proceed to the next
+	step in the installation process, preparing your hard disk.
+
+To prepare for installing via FTP:
+
+	NOTE: this method of installation is recommended
+	      only for those already familiar with using
+	      the BSD network-manipulation commands and
+	      interfaces.  If you aren't, this documentation
+	      should help, but is not intended to be
+	      all-encompassing.
+
+	The preparations for this method of installation
+	are easy: all you have to do is make sure that
+	there's some FTP site from which you can retrieve
+	the NetBSD installation when it's time to do
+	the install.  You should know the numeric IP
+	address of that site, the numeric IP address of
+	your nearest router if one is necessary
+
+	Once you have done this, you can proceed to the next
+	step in the installation process, preparing your hard disk.
+
+If you are upgrading NetBSD, you also have the option of installing
+NetBSD by putting the new distribution sets somewhere in your existing
+file system, and using them from there.  To do that, you must do the
+following:
+
+	Place the distribution sets you wish to upgrade somewhere in
+	your current file system tree.  At a bare minimum, you must
+	upgrade the "base" binary distribution, and so must put the
+	"base11" set somewhere in your file system.  If you wish,
+	you can do the other sets, as well, but you should NOT upgrade
+	the "etc" distribution; the "etc" distribution contains system
+	configuration files that you should review and update by hand.
+
+	Once you have done this, you can proceed to the next step in
+	the upgrade process, actually upgrading your system.