spelling/grammar fixes

11 files changed, 27 insertions, 27 deletions

diff --git a/distrib/notes/arm64/install b/distrib/notes/arm64/install
index 660ff83ae93..b9ec1b9e77f 100644
--- a/distrib/notes/arm64/install
+++ b/distrib/notes/arm64/install
@@ -1,4 +1,4 @@
-dnl     $OpenBSD: install,v 1.1 2017/01/25 02:29:25 patrick Exp $
+dnl     $OpenBSD: install,v 1.2 2020/07/05 22:27:47 tj Exp $
 OpenBSDInstallPrelude
 
 OpenBSDInstallPart2
@@ -23,7 +23,7 @@ dnl OpenBSDInstallMBRPart2(indeed)
 	will create a small 'MSDOS' partition and use the rest of
 	the disk for the OpenBSD installation.
 
-	After your OpenBSD MBR partition has been setup, the real
+	After your OpenBSD MBR partition has been set up, the real
 	partition setup can follow.
 
 OpenBSDInstallPart5
diff --git a/distrib/notes/armv7/install b/distrib/notes/armv7/install
index 9a9de0aa3f2..e2062b39e1c 100644
--- a/distrib/notes/armv7/install
+++ b/distrib/notes/armv7/install
@@ -1,4 +1,4 @@
-dnl     $OpenBSD: install,v 1.2 2013/12/04 23:20:19 jmc Exp $
+dnl     $OpenBSD: install,v 1.3 2020/07/05 22:27:47 tj Exp $
 OpenBSDInstallPrelude
 
 OpenBSDInstallPart2
@@ -23,7 +23,7 @@ dnl OpenBSDInstallMBRPart2(indeed)
 	will create a small 'MSDOS' partition and use the rest of
 	the disk for the OpenBSD installation.
 
-	After your OpenBSD MBR partition has been setup, the real
+	After your OpenBSD MBR partition has been set up, the real
 	partition setup can follow.
 
 OpenBSDInstallPart5
diff --git a/distrib/notes/hppa/install b/distrib/notes/hppa/install
index 127d821462f..7346530dce8 100644
--- a/distrib/notes/hppa/install
+++ b/distrib/notes/hppa/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.28 2020/05/17 17:04:28 deraadt Exp $
+dnl	$OpenBSD: install,v 1.29 2020/07/05 22:27:47 tj Exp $
 dnl lots of texts coming from {mvme68k,vax}/install initially
 OpenBSDInstallPrelude
 
@@ -59,7 +59,7 @@ Booting from Network:
 
 	Select from menu:
 
-    In this case, you will need to setup rbootd on the server. Start by
+    In this case, you will need to set up rbootd on the server. Start by
     creating an /etc/rbootd.conf file on the bootserver. The format of this
     file is the ethernet address followed by the LIF filename. Here is an
     example:
diff --git a/distrib/notes/loongson/install b/distrib/notes/loongson/install
index 90d9ff5038f..36d765813d5 100644
--- a/distrib/notes/loongson/install
+++ b/distrib/notes/loongson/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.15 2019/08/10 17:58:57 deraadt Exp $
+dnl	$OpenBSD: install,v 1.16 2020/07/05 22:27:47 tj Exp $
 OpenBSDInstallPrelude
 
 Booting the installation media:
@@ -63,7 +63,7 @@ dnl OpenBSDInstallMBRPart2
 	will create a small 'Linux files' partition and use the rest of
 	the disk for the OpenBSD installation.
 
-	After your OpenBSD MBR partition has been setup, the real
+	After your OpenBSD MBR partition has been set up, the real
 	partition setup can follow.
 
 OpenBSDInstallPart5({:-
diff --git a/distrib/notes/m4.common b/distrib/notes/m4.common
index 68f66ba4c89..46df85f2b07 100644
--- a/distrib/notes/m4.common
+++ b/distrib/notes/m4.common
@@ -1,5 +1,5 @@
 dnl
-dnl	$OpenBSD: m4.common,v 1.129 2020/05/17 17:04:27 deraadt Exp $
+dnl	$OpenBSD: m4.common,v 1.130 2020/07/05 22:27:46 tj Exp $
 dnl
 dnl Copyright (c) 2004 Todd T. Fries <todd@OpenBSD.org>
 dnl
@@ -350,7 +350,7 @@ dnl XXX add a MDVLAN feature and document vlan setup
 	  messages.
 
 	After all interfaces have been configured, if there have been
-	any IPv4 interfaces setup, you will be asked for the IPv4 default
+	any IPv4 interfaces set up, you will be asked for the IPv4 default
 	route.  This step is skipped if you only have one IPv4 interface
 	setup, and it is configured with DHCP.
 
@@ -399,7 +399,7 @@ ifelse(MDSERCONS,,,{:-
 -:})dnl
 
 dnl install.sub (install) user_setup()
-	You will now be given the possibility to setup a user account
+	You will now be given the possibility to set up a user account
 	on the forthcoming system.  This user will be added to the
 	"wheel" group.
 
@@ -416,7 +416,7 @@ dnl install.sub (install) user_setup()
 	check that the two passwords match, but you should make sure to
 	use a strong password here as well.
 
-	If you have chosen to setup a user account, and you had chosen
+	If you have chosen to set up a user account, and you had chosen
 	to start sshd(8) on boot, you will be asked if you want to allow
 	sshd(8) logins as root.
 dnl install.sub (install) set_timezone
@@ -530,7 +530,7 @@ define({:-OpenBSDInstallPart6-:},
 	return to the list of available disks to configure.
 
 	You can choose the other disks to use with OpenBSD in
-	any order, and will get to setup their layout similarly
+	any order, and will get to set up their layout similarly
 	to the root disk above. However, for non-root disks,
 	you will not be proposed a default partition layout.
 
diff --git a/distrib/notes/macppc/install b/distrib/notes/macppc/install
index e2f5f5a171a..2b96c954414 100644
--- a/distrib/notes/macppc/install
+++ b/distrib/notes/macppc/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.34 2014/10/10 13:25:08 krw Exp $
+dnl	$OpenBSD: install,v 1.35 2020/07/05 22:27:47 tj Exp $
 OpenBSDInstallPrelude
 
 Before you begin, you should decide if OpenBSD is to be installed
@@ -127,7 +127,7 @@ dnl XXX This document really should be converted to mdoc...
 		add new partitions, and change which partition to boot from
 		by default.
 
-		After your OpenBSD MBR partition has been setup, the real
+		After your OpenBSD MBR partition has been set up, the real
 		partition setup can follow.
 
 OpenBSDInstallPart5({:-
@@ -140,7 +140,7 @@ OpenBSDInstallPart5({:-
 	from the installation media into the first HFS(+) partition using
 	Mac OS or Mac OS X.
 	If the disk is partitioned using MBR, the bootloader will be
-	automatically installed if you setup a small (a few MB) MSDOS
+	automatically installed if you set up a small (a few MB) MSDOS
 	partition as position `i' in the label.
 
 OpenBSDInstallPart6({:-CD-ROM, -:})
diff --git a/distrib/notes/octeon/install b/distrib/notes/octeon/install
index 81d34093574..c2f29916282 100644
--- a/distrib/notes/octeon/install
+++ b/distrib/notes/octeon/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.18 2019/07/28 16:09:07 visa Exp $
+dnl	$OpenBSD: install,v 1.19 2020/07/05 22:27:48 tj Exp $
 OpenBSDInstallPrelude
 
 OpenBSDInstallPart2
@@ -24,7 +24,7 @@ dnl OpenBSDInstallMBRPart2
 	will create a small 'MSDOS' partition and use the rest of
 	the disk for the OpenBSD installation.
 
-	After your OpenBSD MBR partition has been setup, the real
+	After your OpenBSD MBR partition has been set up, the real
 	partition setup can follow.
 
 OpenBSDInstallPart5({:-
diff --git a/distrib/notes/octeon/prep b/distrib/notes/octeon/prep
index ac5a0b85a79..ee8dee551e4 100644
--- a/distrib/notes/octeon/prep
+++ b/distrib/notes/octeon/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.10 2020/05/17 17:04:28 deraadt Exp $
+dnl	$OpenBSD: prep,v 1.11 2020/07/05 22:27:48 tj Exp $
 By default MACHINE systems are shipped with a Linux (or proprietary) system
 installed on the CompactFlash card or USB drive.
 
@@ -50,7 +50,7 @@ Booting from a CF card or USB:
 
 Booting over the network:
 
-  For TFTP you will first need to setup a TFTP server as described in
+  For TFTP you will first need to set up a TFTP server as described in
   diskless(8). Assuming tftpd(8) chroots into /tftpboot, copy bsd.rd into that
   directory.
 
diff --git a/distrib/notes/powerpc64/install b/distrib/notes/powerpc64/install
index 1993903e7a3..ad731e5bb55 100644
--- a/distrib/notes/powerpc64/install
+++ b/distrib/notes/powerpc64/install
@@ -1,4 +1,4 @@
-dnl     $OpenBSD: install,v 1.1 2020/07/05 20:01:35 kettenis Exp $
+dnl     $OpenBSD: install,v 1.2 2020/07/05 22:27:48 tj Exp $
 OpenBSDInstallPrelude
 
 OpenBSDInstallPart2
@@ -12,7 +12,7 @@ OpenBSDInstallMBRPart1
 dnl OpenBSDInstallMBRPart2(indeed)
 	The fdisk(8) utility will be invoked to let you edit your MBR
 	partitioning.  The current MBR partitions defined will be
-	displayed and you will be allowed to modify them, and add new
+	displayed and you will be allowed to modify them or add new
 	partitions.
 
 	The setup will need two partitions, one 'OpenBSD' for the
@@ -23,7 +23,7 @@ dnl OpenBSDInstallMBRPart2(indeed)
 	will create a small 'MSDOS' partition and use the rest of
 	the disk for the OpenBSD installation.
 
-	After your OpenBSD MBR partition has been setup, the real
+	After your OpenBSD MBR partition has been set up, the real
 	partition setup can follow.
 
 OpenBSDInstallPart5
diff --git a/distrib/notes/powerpc64/whatis b/distrib/notes/powerpc64/whatis
index caa533b6d44..6e49d87dea9 100644
--- a/distrib/notes/powerpc64/whatis
+++ b/distrib/notes/powerpc64/whatis
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: whatis,v 1.1 2020/07/05 20:01:35 kettenis Exp $
+dnl	$OpenBSD: whatis,v 1.2 2020/07/05 22:27:48 tj Exp $
 
-OpenBSD/MACHINE runs on systems equiped with IBM POWER9 processors and
+OpenBSD/MACHINE runs on systems equipped with IBM POWER9 processors and
 OPAL firmware.
diff --git a/distrib/notes/sparc64/install b/distrib/notes/sparc64/install
index 9beae67d416..c59e2eb5737 100644
--- a/distrib/notes/sparc64/install
+++ b/distrib/notes/sparc64/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.52 2020/05/17 17:04:28 deraadt Exp $
+dnl	$OpenBSD: install,v 1.53 2020/07/05 22:27:48 tj Exp $
 OpenBSDInstallPrelude
 
 There are several ways to install OpenBSD onto a disk. The easiest way
@@ -131,7 +131,7 @@ OpenBSDCongratulations
 
 Net Boot or Diskless Setup Information:
 
-The set up is similar to the diskless setup, but not identical, because
+The setup is similar to the diskless setup, but not identical, because
 the Sun setup assumes that the bootblocks load a kernel image, which then
 uses NFS to access the exported root partition, while the OpenBSD bootblocks
 use internal NFS routines to load the kernel image directly from the