summaryrefslogtreecommitdiff
path: root/distrib
diff options
context:
space:
mode:
authorTheo de Raadt <deraadt@cvs.openbsd.org>1997-10-11 03:53:47 +0000
committerTheo de Raadt <deraadt@cvs.openbsd.org>1997-10-11 03:53:47 +0000
commit235dc432484a48747b39aa08f905a72e3437503a (patch)
tree049094a011b64427cf79c77ca99702f610951d9d /distrib
parent8f54a36a6de65c4753af43746e3c40fe506d8e93 (diff)
some corrections
Diffstat (limited to 'distrib')
-rw-r--r--distrib/notes/i386/hardware24
1 files changed, 14 insertions, 10 deletions
diff --git a/distrib/notes/i386/hardware b/distrib/notes/i386/hardware
index d8d42df02fa..1220de0788a 100644
--- a/distrib/notes/i386/hardware
+++ b/distrib/notes/i386/hardware
@@ -24,6 +24,9 @@ Supported devices include:
Adaptec AHA-294x[W] cards and some onboard PCI designs using
the AIC7870 chip. This driver does *not* currently
work with non-PCI AIC-7xxx boards or the Adaptec 3940.
+ Adaptec AIC-7770-based SCSI host adapters (including the
+ Adaptec AHA-274x, AHA-284x families).
+ WD-7000 SCSI host adapters.
Buslogic 54x (Adaptec AHA-154x clones; driver on kcadp floppy)
BusLogic 445, 74x, 9xx (But not the new "FlashPoint" series
of BusLogic SCSI adapters)
@@ -33,7 +36,6 @@ Supported devices include:
ST01/02
Future Domain TMC-885
Future Domain TMC-950
-
MDA, CGA, VGA, SVGA, and HGC Display Adapters. (Note that not
all of the display adapters OpenBSD/i386 can work with
are supported by X. See the XFree86 FAQ for more
@@ -71,6 +73,7 @@ Supported devices include:
SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards) [X SEE BELOW]
Novell NE1000, NE2000
Digital DEFPA PCI FDDI adapters
+ Intel EtherExpress 100 Fast Ethernet adapters.
Tape drives:
Most SCSI tape drives
QIC-02 and QIC-36 format (Archive- and Wangtek-
@@ -95,7 +98,11 @@ Supported devices include:
ProAudio Spectrum [*] [+]
Miscellaneous:
OPTi(82C929) chipset for multi-interface CD-ROM, and
- sound ISA cards.
+ sound ISA cards.
+ PCI-PCI bridges and cards which include them, such as
+ the AHA-394x SCSI host adapter and some
+ DC21x4x-based multi-Ethernet cards.
+ APM power management.
Drivers for hardware marked with "[*]" are NOT included on the
distribution floppies. Except as noted above, all other drivers are
@@ -111,18 +118,11 @@ although it is not in the kernel on the installation floppy.
Hardware the we do NOT currently support, but get many questions
about:
- Adaptec AIC-7770-based SCSI host adapters (including the
- Adaptec AHA-274x, AHA-284x families).
NCR 5380-based SCSI host adapters.
- APM power management -- if your system supports it, turn it off!
QIC-40 and QIC-80 tape drives. (Those are the tape drives
that connect to the floppy disk controller.)
- WD-7000 SCSI host adapters.
- PCI-PCI bridges and cards which include them, such as the AHA-394x
- SCSI host adapter and some DC21x4x-based multi-Ethernet cards.
Multiprocessor Pentium and Pentium Pro systems. (Though they should
run fine using one processor only.)
- Intel EtherExpress 100 Fast Ethernet adapters.
We are planning future support for many of these devices.
@@ -181,7 +181,7 @@ Novell NE1000, or NE2000 Ethernet boards
ed1 0x250 2 iomem 0xd8000
ed2 0x300 10 iomem 0xcc000 [X SEE BELOW]
-3COM 3c509, 3c579, 3c595 Ethernet boards (the 3c590 has problems)
+3COM 3c509, 3c579, 3c595, 3c900, 3c905 Ethernet boards
ep0 any any
AT&T StarLAN 10, EN100, or StarLAN Fiber, or 3COM 3c507 Ethernet boards
@@ -195,6 +195,10 @@ DC21x4x based Ethernet boards; see above for partial list
de0 any any [you must assign an interrupt in your
PCI BIOS, or let it do so for you]
+Intel EtherExpress 100 Ethernet boards
+ fxp0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
+
SPECIAL CARE FOR SMC ULTRA ELITE
--------------------------------