Merge to Cygnus 961112 + add some support (not ready) for shared libs

1 files changed, 183 insertions, 0 deletions

diff --git a/gnu/usr.bin/binutils/gdb/monitor.h b/gnu/usr.bin/binutils/gdb/monitor.h
new file mode 100644
index 00000000000..82b417b1685
--- /dev/null
+++ b/gnu/usr.bin/binutils/gdb/monitor.h
@@ -0,0 +1,183 @@
+/* Definitions for remote debugging interface for ROM monitors.
+    Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
+    Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+  
+   This file is part of GDB.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+  
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#include "serial.h"
+
+/* This structure describes the strings necessary to give small command
+   sequences to the monitor, and parse the response.
+
+   CMD is the actual command typed at the monitor.  Usually this has
+   embedded sequences ala printf, which are substituted with the
+   arguments appropriate to that type of command.  Ie: to examine a
+   register, we substitute the register name for the first arg.  To
+   modify memory, we substitute the memory location and the new
+   contents for the first and second args, etc...
+
+   RESP_DELIM used to home in on the response string, and is used to
+   disambiguate the answer within the pile of text returned by the
+   monitor.  This should be a unique string that immediately precedes
+   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
+   response to asking for the PC, you should use `: ' as the
+   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
+   be ignored, or has no particular leading text.
+
+   TERM is the string that the monitor outputs to indicate that it is
+   idle, and waiting for input.  This is usually a prompt of some
+   sort.  In the previous example, it would be `= '.  It is important
+   that TERM really means that the monitor is idle, otherwise GDB may
+   try to type at it when it isn't ready for input.  This is a problem
+   because many monitors cannot deal with type-ahead.  TERM may be
+   NULL if the normal prompt is output.
+
+   TERM_CMD is used to quit out of the subcommand mode and get back to
+   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
+   will also be ignored if TERM is NULL.  */
+
+struct memrw_cmd
+{
+  char *cmdb;			/* Command to send for byte read/write */
+  char *cmdw;			/* Command for word (16 bit) read/write */
+  char *cmdl;			/* Command for long (32 bit) read/write */
+  char *cmdll;			/* Command for long long (64 bit) read/write */
+  char *resp_delim;		/* String just prior to the desired value */
+  char *term;			/* Terminating string to search for */
+  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
+};
+
+struct regrw_cmd
+{
+  char *cmd;			/* Command to send for reg read/write */
+  char *resp_delim;		/* String (actually a regexp if getmem) just
+				   prior to the desired value */
+  char *term;			/* Terminating string to search for */
+  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
+};
+
+struct monitor_ops
+{
+  int flags;			/* See below */
+  char **init;			/* List of init commands.  NULL terminated. */
+  char *cont;			/* continue command */
+  char *step;			/* single step */
+  char *stop;			/* Interrupt program string */
+  char *set_break;		/* set a breakpoint */
+  char *clr_break;		/* clear a breakpoint */
+  char *clr_all_break;		/* Clear all breakpoints */
+  char *fill;			/* Memory fill cmd (addr len val) */
+  struct memrw_cmd setmem;	/* set memory to a value */
+  struct memrw_cmd getmem;	/* display memory */
+  struct regrw_cmd setreg;	/* set a register */
+  struct regrw_cmd getreg;	/* get a register */
+				/* Some commands can dump a bunch of registers
+				   at once.  This comes as a set of REG=VAL
+				   pairs.  This should be called for each pair
+				   of registers that we can parse to supply
+				   GDB with the value of a register.  */
+  char *dump_registers;		/* Command to dump all regs at once */
+  char *register_pattern;	/* Pattern that picks out register from reg dump */
+  void (*supply_register) PARAMS ((char *name, int namelen, char *val, int vallen));
+  void (*load_routine) PARAMS ((serial_t desc, char *file, int hashmark)); /* Download routine */
+  char *load;			/* load command */
+  char *loadresp;		/* Response to load command */
+  char *prompt;			/* monitor command prompt */
+  char *line_term;		/* end-of-command delimitor */
+  char *cmd_end;		/* optional command terminator */
+  struct target_ops *target;	/* target operations */
+  int stopbits;			/* number of stop bits */
+  char **regnames;		/* array of register names in ascii */
+  int magic;			/* Check value */
+};
+
+/* The monitor ops magic number, used to detect if an ops structure doesn't
+   have the right number of entries filled in. */
+
+#define MONITOR_OPS_MAGIC 600925
+
+/* Flag definitions. */
+
+/* If set, then clear breakpoint command uses address, otherwise it
+   uses an index returned by the monitor.  */
+
+#define MO_CLR_BREAK_USES_ADDR 0x1
+
+/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
+   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
+
+#define MO_FILL_USES_ADDR 0x2
+
+/* If set, then monitor doesn't automatically supply register dump
+   when coming back after a continue.  */
+
+#define MO_NEED_REGDUMP_AFTER_CONT 0x4
+
+/* getmem needs start addr and end addr */
+
+#define MO_GETMEM_NEEDS_RANGE 0x8
+
+/* getmem can only read one loc at a time */
+
+#define MO_GETMEM_READ_SINGLE 0x10
+
+/* handle \r\n combinations */
+
+#define MO_HANDLE_NL 0x20
+
+/* don't expect echos in monitor_open */
+
+#define MO_NO_ECHO_ON_OPEN 0x40
+
+/* If set, send break to stop monitor */
+
+#define MO_SEND_BREAK_ON_STOP 0x80
+
+/* If set, target sends an ACK after each S-record */
+
+#define MO_SREC_ACK 0x100
+
+/* Allow 0x prefix on addresses retured from monitor */
+
+#define MO_HEX_PREFIX 0x200
+
+/* Some monitors require a different command when starting a program */
+
+#define MO_RUN_FIRST_TIME 0x400
+
+/* Don't expect echos when getting memory */
+
+#define MO_NO_ECHO_ON_SETMEM 0x800
+
+/* If set, then register store command expects value BEFORE regname */
+
+#define MO_REGISTER_VALUE_FIRST 0x1000
+
+#define SREC_SIZE 160
+
+extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
+				  int from_tty));
+extern void monitor_close PARAMS ((int quitting));
+extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
+extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
+extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
+extern void monitor_printf PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+extern void monitor_printf_noecho PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+extern void init_monitor_ops PARAMS ((struct target_ops *));