Merge to Cygnus 961112 + add some support (not ready) for shared libs

1 files changed, 1573 insertions, 0 deletions

diff --git a/gnu/usr.bin/binutils/gdb/sparc-tdep.c b/gnu/usr.bin/binutils/gdb/sparc-tdep.c
new file mode 100644
index 00000000000..629c0ff4568
--- /dev/null
+++ b/gnu/usr.bin/binutils/gdb/sparc-tdep.c
@@ -0,0 +1,1573 @@
+/* Target-dependent code for the SPARC for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* ??? Support for calling functions from gdb in sparc64 is unfinished.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+
+#ifdef	USE_PROC_FS
+#include <sys/procfs.h>
+#endif
+
+#include "gdbcore.h"
+
+#ifdef GDB_TARGET_IS_SPARC64
+#define FP_REGISTER_BYTES (64 * 4)
+#else
+#define FP_REGISTER_BYTES (32 * 4)
+#endif
+
+/* If not defined, assume 32 bit sparc.  */
+#ifndef FP_MAX_REGNUM
+#define FP_MAX_REGNUM (FP0_REGNUM + 32)
+#endif
+
+#define SPARC_INTREG_SIZE (REGISTER_RAW_SIZE (G0_REGNUM))
+
+/* From infrun.c */
+extern int stop_after_trap;
+
+/* We don't store all registers immediately when requested, since they
+   get sent over in large chunks anyway.  Instead, we accumulate most
+   of the changes and send them over once.  "deferred_stores" keeps
+   track of which sets of registers we have locally-changed copies of,
+   so we only need send the groups that have changed.  */
+
+int deferred_stores = 0;	/* Cumulates stores we want to do eventually. */
+
+/* Branches with prediction are treated like their non-predicting cousins.  */
+/* FIXME: What about floating point branches?  */
+
+/* Macros to extract fields from sparc instructions.  */
+#define X_OP(i) (((i) >> 30) & 0x3)
+#define X_RD(i) (((i) >> 25) & 0x1f)
+#define X_A(i) (((i) >> 29) & 1)
+#define X_COND(i) (((i) >> 25) & 0xf)
+#define X_OP2(i) (((i) >> 22) & 0x7)
+#define X_IMM22(i) ((i) & 0x3fffff)
+#define X_OP3(i) (((i) >> 19) & 0x3f)
+#define X_RS1(i) (((i) >> 14) & 0x1f)
+#define X_I(i) (((i) >> 13) & 1)
+#define X_IMM13(i) ((i) & 0x1fff)
+/* Sign extension macros.  */
+#define X_SIMM13(i) ((X_IMM13 (i) ^ 0x1000) - 0x1000)
+#define X_DISP22(i) ((X_IMM22 (i) ^ 0x200000) - 0x200000)
+#ifdef GDB_TARGET_IS_SPARC64
+#define X_CC(i) (((i) >> 20) & 3)
+#define X_P(i) (((i) >> 19) & 1)
+#define X_DISP19(i) ((((i) & 0x7ffff) ^ 0x40000) - 0x40000)
+#define X_RCOND(i) (((i) >> 25) & 7)
+#define X_DISP16(i) ((((((i) >> 6) && 0xc000) | ((i) & 0x3fff)) ^ 0x8000) - 0x8000)
+#define X_FCN(i) (((i) >> 25) & 31)
+#endif
+
+typedef enum
+{
+  Error, not_branch, bicc, bicca, ba, baa, ticc, ta,
+#ifdef GDB_TARGET_IS_SPARC64
+  done_retry
+#endif
+} branch_type;
+
+/* Simulate single-step ptrace call for sun4.  Code written by Gary
+   Beihl (beihl@mcc.com).  */
+
+/* npc4 and next_pc describe the situation at the time that the
+   step-breakpoint was set, not necessary the current value of NPC_REGNUM.  */
+static CORE_ADDR next_pc, npc4, target;
+static int brknpc4, brktrg;
+typedef char binsn_quantum[BREAKPOINT_MAX];
+static binsn_quantum break_mem[3];
+
+/* Non-zero if we just simulated a single-step ptrace call.  This is
+   needed because we cannot remove the breakpoints in the inferior
+   process until after the `wait' in `wait_for_inferior'.  Used for
+   sun4. */
+
+int one_stepped;
+
+static branch_type isbranch PARAMS ((long, CORE_ADDR, CORE_ADDR *));
+
+/* single_step() is called just before we want to resume the inferior,
+   if we want to single-step it but there is no hardware or kernel single-step
+   support (as on all SPARCs).  We find all the possible targets of the
+   coming instruction and breakpoint them.
+
+   single_step is also called just after the inferior stops.  If we had
+   set up a simulated single-step, we undo our damage.  */
+
+void
+single_step (ignore)
+     enum target_signal ignore; /* pid, but we don't need it */
+{
+  branch_type br;
+  CORE_ADDR pc;
+  long pc_instruction;
+
+  if (!one_stepped)
+    {
+      /* Always set breakpoint for NPC.  */
+      next_pc = read_register (NPC_REGNUM);
+      npc4 = next_pc + 4; /* branch not taken */
+
+      target_insert_breakpoint (next_pc, break_mem[0]);
+      /* printf_unfiltered ("set break at %x\n",next_pc); */
+
+      pc = read_register (PC_REGNUM);
+      pc_instruction = read_memory_integer (pc, 4);
+      br = isbranch (pc_instruction, pc, &target);
+      brknpc4 = brktrg = 0;
+
+      if (br == bicca)
+	{
+	  /* Conditional annulled branch will either end up at
+	     npc (if taken) or at npc+4 (if not taken).
+	     Trap npc+4.  */
+	  brknpc4 = 1;
+	  target_insert_breakpoint (npc4, break_mem[1]);
+	}
+      else if (br == baa && target != next_pc)
+	{
+	  /* Unconditional annulled branch will always end up at
+	     the target.  */
+	  brktrg = 1;
+	  target_insert_breakpoint (target, break_mem[2]);
+	}
+#ifdef GDB_TARGET_IS_SPARC64
+      else if (br == done_retry)
+	{
+	  brktrg = 1;
+	  target_insert_breakpoint (target, break_mem[2]);
+	}
+#endif
+
+      /* We are ready to let it go */
+      one_stepped = 1;
+      return;
+    }
+  else
+    {
+      /* Remove breakpoints */
+      target_remove_breakpoint (next_pc, break_mem[0]);
+
+      if (brknpc4)
+	target_remove_breakpoint (npc4, break_mem[1]);
+
+      if (brktrg)
+	target_remove_breakpoint (target, break_mem[2]);
+
+      one_stepped = 0;
+    }
+}
+
+/* Call this for each newly created frame.  For SPARC, we need to calculate
+   the bottom of the frame, and do some extra work if the prologue
+   has been generated via the -mflat option to GCC.  In particular,
+   we need to know where the previous fp and the pc have been stashed,
+   since their exact position within the frame may vary.  */
+
+void
+sparc_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  char *name;
+  CORE_ADDR addr;
+  int insn;
+
+  fi->bottom =
+    (fi->next ?
+     (fi->frame == fi->next->frame ? fi->next->bottom : fi->next->frame) :
+     read_register (SP_REGNUM));
+
+  /* If fi->next is NULL, then we already set ->frame by passing read_fp()
+     to create_new_frame.  */
+  if (fi->next)
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+      int err;
+
+      /* Compute ->frame as if not flat.  If it is flat, we'll change
+	 it later.  */
+      /* FIXME: If error reading memory, should just stop backtracing, rather
+	 than error().  */
+      get_saved_register (buf, 0, 0, fi, FP_REGNUM, 0);
+      fi->frame = extract_address (buf, REGISTER_RAW_SIZE (FP_REGNUM));
+    }
+
+  /* Decide whether this is a function with a ``flat register window''
+     frame.  For such functions, the frame pointer is actually in %i7.  */
+  fi->flat = 0;
+  if (find_pc_partial_function (fi->pc, &name, &addr, NULL))
+    {
+      /* See if the function starts with an add (which will be of a
+	 negative number if a flat frame) to the sp.  FIXME: Does not
+	 handle large frames which will need more than one instruction
+	 to adjust the sp.  */
+      insn = read_memory_integer (addr, 4);
+      if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0
+	  && X_I (insn) && X_SIMM13 (insn) < 0)
+	{
+	  int offset = X_SIMM13 (insn);
+
+	  /* Then look for a save of %i7 into the frame.  */
+	  insn = read_memory_integer (addr + 4, 4);
+	  if (X_OP (insn) == 3
+	      && X_RD (insn) == 31
+	      && X_OP3 (insn) == 4
+	      && X_RS1 (insn) == 14)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      /* We definitely have a flat frame now.  */
+	      fi->flat = 1;
+
+	      fi->sp_offset = offset;
+
+	      /* Overwrite the frame's address with the value in %i7.  */
+	      get_saved_register (buf, 0, 0, fi, I7_REGNUM, 0);
+	      fi->frame = extract_address (buf, REGISTER_RAW_SIZE (I7_REGNUM));
+
+	      /* Record where the fp got saved.  */
+	      fi->fp_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+
+	      /* Also try to collect where the pc got saved to.  */
+	      fi->pc_addr = 0;
+	      insn = read_memory_integer (addr + 12, 4);
+	      if (X_OP (insn) == 3
+		  && X_RD (insn) == 15
+		  && X_OP3 (insn) == 4
+		  && X_RS1 (insn) == 14)
+		fi->pc_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+	    }
+	}
+    }
+  if (fi->next && fi->frame == 0)
+    {
+      /* Kludge to cause init_prev_frame_info to destroy the new frame.  */
+      fi->frame = fi->next->frame;
+      fi->pc = fi->next->pc;
+    }
+}
+
+CORE_ADDR
+sparc_frame_chain (frame)
+     struct frame_info *frame;
+{
+  /* Value that will cause FRAME_CHAIN_VALID to not worry about the chain
+     value.  If it realy is zero, we detect it later in
+     sparc_init_prev_frame.  */
+  return (CORE_ADDR)1;
+}
+
+CORE_ADDR
+sparc_extract_struct_value_address (regbuf)
+     char regbuf[REGISTER_BYTES];
+{
+#ifdef GDB_TARGET_IS_SPARC64
+  return extract_address (regbuf + REGISTER_BYTE (O0_REGNUM),
+			  REGISTER_RAW_SIZE (O0_REGNUM));
+#else
+  return read_memory_integer (((int *)(regbuf)) [SP_REGNUM] + (16 * SPARC_INTREG_SIZE), 
+	       		      TARGET_PTR_BIT / TARGET_CHAR_BIT);
+#endif
+}
+
+/* Find the pc saved in frame FRAME.  */
+
+CORE_ADDR
+sparc_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  char buf[MAX_REGISTER_RAW_SIZE];
+  CORE_ADDR addr;
+
+  if (frame->signal_handler_caller)
+    {
+      /* This is the signal trampoline frame.
+	 Get the saved PC from the sigcontext structure.  */
+
+#ifndef SIGCONTEXT_PC_OFFSET
+#define SIGCONTEXT_PC_OFFSET 12
+#endif
+
+      CORE_ADDR sigcontext_addr;
+      char scbuf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+      int saved_pc_offset = SIGCONTEXT_PC_OFFSET;
+      char *name = NULL;
+
+      /* Solaris2 ucbsigvechandler passes a pointer to a sigcontext
+	 as the third parameter.  The offset to the saved pc is 12.  */
+      find_pc_partial_function (frame->pc, &name,
+				(CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+      if (name && STREQ (name, "ucbsigvechandler"))
+	saved_pc_offset = 12;
+
+      /* The sigcontext address is contained in register O2.  */
+      get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
+			  frame, O0_REGNUM + 2, (enum lval_type *)NULL);
+      sigcontext_addr = extract_address (buf, REGISTER_RAW_SIZE (O0_REGNUM + 2));
+
+      /* Don't cause a memory_error when accessing sigcontext in case the
+	 stack layout has changed or the stack is corrupt.  */
+      target_read_memory (sigcontext_addr + saved_pc_offset,
+			  scbuf, sizeof (scbuf));
+      return extract_address (scbuf, sizeof (scbuf));
+    }
+  if (frame->flat)
+    addr = frame->pc_addr;
+  else
+    addr = frame->bottom + FRAME_SAVED_I0 +
+      SPARC_INTREG_SIZE * (I7_REGNUM - I0_REGNUM);
+
+  if (addr == 0)
+    /* A flat frame leaf function might not save the PC anywhere,
+       just leave it in %o7.  */
+    return PC_ADJUST (read_register (O7_REGNUM));
+
+  read_memory (addr, buf, SPARC_INTREG_SIZE);
+  return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
+}
+
+/* Since an individual frame in the frame cache is defined by two
+   arguments (a frame pointer and a stack pointer), we need two
+   arguments to get info for an arbitrary stack frame.  This routine
+   takes two arguments and makes the cached frames look as if these
+   two arguments defined a frame on the cache.  This allows the rest
+   of info frame to extract the important arguments without
+   difficulty.  */
+
+struct frame_info *
+setup_arbitrary_frame (argc, argv)
+     int argc;
+     CORE_ADDR *argv;
+{
+  struct frame_info *frame;
+
+  if (argc != 2)
+    error ("Sparc frame specifications require two arguments: fp and sp");
+
+  frame = create_new_frame (argv[0], 0);
+
+  if (!frame)
+    fatal ("internal: create_new_frame returned invalid frame");
+  
+  frame->bottom = argv[1];
+  frame->pc = FRAME_SAVED_PC (frame);
+  return frame;
+}
+
+/* Given a pc value, skip it forward past the function prologue by
+   disassembling instructions that appear to be a prologue.
+
+   If FRAMELESS_P is set, we are only testing to see if the function
+   is frameless.  This allows a quicker answer.
+
+   This routine should be more specific in its actions; making sure
+   that it uses the same register in the initial prologue section.  */
+
+static CORE_ADDR examine_prologue PARAMS ((CORE_ADDR, int, struct frame_info *,
+					   struct frame_saved_regs *));
+
+static CORE_ADDR 
+examine_prologue (start_pc, frameless_p, fi, saved_regs)
+     CORE_ADDR start_pc;
+     int frameless_p;
+     struct frame_info *fi;
+     struct frame_saved_regs *saved_regs;
+{
+  int insn;
+  int dest = -1;
+  CORE_ADDR pc = start_pc;
+  int is_flat = 0;
+
+  insn = read_memory_integer (pc, 4);
+
+  /* Recognize the `sethi' insn and record its destination.  */
+  if (X_OP (insn) == 0 && X_OP2 (insn) == 4)
+    {
+      dest = X_RD (insn);
+      pc += 4;
+      insn = read_memory_integer (pc, 4);
+    }
+
+  /* Recognize an add immediate value to register to either %g1 or
+     the destination register recorded above.  Actually, this might
+     well recognize several different arithmetic operations.
+     It doesn't check that rs1 == rd because in theory "sub %g0, 5, %g1"
+     followed by "save %sp, %g1, %sp" is a valid prologue (Not that
+     I imagine any compiler really does that, however).  */
+  if (X_OP (insn) == 2
+      && X_I (insn)
+      && (X_RD (insn) == 1 || X_RD (insn) == dest))
+    {
+      pc += 4;
+      insn = read_memory_integer (pc, 4);
+    }
+
+  /* Recognize any SAVE insn.  */
+  if (X_OP (insn) == 2 && X_OP3 (insn) == 60)
+    {
+      pc += 4;
+      if (frameless_p)			/* If the save is all we care about, */
+	return pc;			/* return before doing more work */
+      insn = read_memory_integer (pc, 4);
+    }
+  /* Recognize add to %sp.  */
+  else if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0)
+    {
+      pc += 4;
+      if (frameless_p)			/* If the add is all we care about, */
+	return pc;			/* return before doing more work */
+      is_flat = 1;
+      insn = read_memory_integer (pc, 4);
+      /* Recognize store of frame pointer (i7).  */
+      if (X_OP (insn) == 3
+	  && X_RD (insn) == 31
+	  && X_OP3 (insn) == 4
+	  && X_RS1 (insn) == 14)
+	{
+	  pc += 4;
+	  insn = read_memory_integer (pc, 4);
+
+	  /* Recognize sub %sp, <anything>, %i7.  */
+	  if (X_OP (insn) ==  2
+	      && X_OP3 (insn) == 4
+	      && X_RS1 (insn) == 14
+	      && X_RD (insn) == 31)
+	    {
+	      pc += 4;
+	      insn = read_memory_integer (pc, 4);
+	    }
+	  else
+	    return pc;
+	}
+      else
+	return pc;
+    }
+  else
+    /* Without a save or add instruction, it's not a prologue.  */
+    return start_pc;
+
+  while (1)
+    {
+      /* Recognize stores into the frame from the input registers.
+	 This recognizes all non alternate stores of input register,
+	 into a location offset from the frame pointer.  */
+      if ((X_OP (insn) == 3
+	   && (X_OP3 (insn) & 0x3c) == 4 /* Store, non-alternate.  */
+	   && (X_RD (insn) & 0x18) == 0x18 /* Input register.  */
+	   && X_I (insn)		/* Immediate mode.  */
+	   && X_RS1 (insn) == 30	/* Off of frame pointer.  */
+	   /* Into reserved stack space.  */
+	   && X_SIMM13 (insn) >= 0x44
+	   && X_SIMM13 (insn) < 0x5b))
+	;
+      else if (is_flat
+	       && X_OP (insn) == 3
+	       && X_OP3 (insn) == 4
+	       && X_RS1 (insn) == 14
+	       )
+	{
+	  if (saved_regs && X_I (insn))
+	    saved_regs->regs[X_RD (insn)] =
+	      fi->frame + fi->sp_offset + X_SIMM13 (insn);
+	}
+      else
+	break;
+      pc += 4;
+      insn = read_memory_integer (pc, 4);
+    }
+
+  return pc;
+}
+
+CORE_ADDR 
+skip_prologue (start_pc, frameless_p)
+     CORE_ADDR start_pc;
+     int frameless_p;
+{
+  return examine_prologue (start_pc, frameless_p, NULL, NULL);
+}
+
+/* Check instruction at ADDR to see if it is a branch.
+   All non-annulled instructions will go to NPC or will trap.
+   Set *TARGET if we find a candidate branch; set to zero if not.
+
+   This isn't static as it's used by remote-sa.sparc.c.  */
+
+static branch_type
+isbranch (instruction, addr, target)
+     long instruction;
+     CORE_ADDR addr, *target;
+{
+  branch_type val = not_branch;
+  long int offset;		/* Must be signed for sign-extend.  */
+
+  *target = 0;
+
+  if (X_OP (instruction) == 0
+      && (X_OP2 (instruction) == 2
+	  || X_OP2 (instruction) == 6
+#ifdef GDB_TARGET_IS_SPARC64
+	  || X_OP2 (instruction) == 1
+	  || X_OP2 (instruction) == 3
+	  || X_OP2 (instruction) == 5
+#else
+	  || X_OP2 (instruction) == 7
+#endif
+	  ))
+    {
+      if (X_COND (instruction) == 8)
+	val = X_A (instruction) ? baa : ba;
+      else
+	val = X_A (instruction) ? bicca : bicc;
+      switch (X_OP2 (instruction))
+	{
+	case 2:
+	case 6:
+#ifndef GDB_TARGET_IS_SPARC64
+	case 7:
+#endif
+	  offset = 4 * X_DISP22 (instruction);
+	  break;
+#ifdef GDB_TARGET_IS_SPARC64
+	case 1:
+	case 5:
+	  offset = 4 * X_DISP19 (instruction);
+	  break;
+	case 3:
+	  offset = 4 * X_DISP16 (instruction);
+	  break;
+#endif
+	}
+      *target = addr + offset;
+    }
+#ifdef GDB_TARGET_IS_SPARC64
+  else if (X_OP (instruction) == 2
+	   && X_OP3 (instruction) == 62)
+    {
+      if (X_FCN (instruction) == 0)
+	{
+	  /* done */
+	  *target = read_register (TNPC_REGNUM);
+	  val = done_retry;
+	}
+      else if (X_FCN (instruction) == 1)
+	{
+	  /* retry */
+	  *target = read_register (TPC_REGNUM);
+	  val = done_retry;
+	}
+    }
+#endif
+
+  return val;
+}
+
+/* Find register number REGNUM relative to FRAME and put its
+   (raw) contents in *RAW_BUFFER.  Set *OPTIMIZED if the variable
+   was optimized out (and thus can't be fetched).  If the variable
+   was fetched from memory, set *ADDRP to where it was fetched from,
+   otherwise it was fetched from a register.
+
+   The argument RAW_BUFFER must point to aligned memory.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  struct frame_info *frame1;
+  CORE_ADDR addr;
+
+  if (!target_has_registers)
+    error ("No registers.");
+
+  if (optimized)
+    *optimized = 0;
+
+  addr = 0;
+
+  /* FIXME This code extracted from infcmd.c; should put elsewhere! */
+  if (frame == NULL)
+    {
+      /* error ("No selected frame."); */
+      if (!target_has_registers)
+        error ("The program has no registers now.");
+      if (selected_frame == NULL) 
+        error ("No selected frame.");
+      /* Try to use selected frame */
+      frame = get_prev_frame (selected_frame);  
+      if (frame == 0)
+        error ("Cmd not meaningful in the outermost frame."); 
+    }
+
+
+  frame1 = frame->next;
+
+  /* Get saved PC from the frame info if not in innermost frame.  */
+  if (regnum == PC_REGNUM && frame1 != NULL)
+    {
+      if (lval != NULL)
+	*lval = not_lval;
+      if (raw_buffer != NULL)
+	{
+	  /* Put it back in target format.  */
+	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->pc);
+	}
+      if (addrp != NULL)
+	*addrp = 0;
+      return;
+    }
+
+  while (frame1 != NULL)
+    {
+      if (frame1->pc >= (frame1->bottom ? frame1->bottom :
+			 read_register (SP_REGNUM))
+	  && frame1->pc <= FRAME_FP (frame1))
+	{
+	  /* Dummy frame.  All but the window regs are in there somewhere.
+	     The window registers are saved on the stack, just like in a
+	     normal frame.  */
+	  if (regnum >= G1_REGNUM && regnum < G1_REGNUM + 7)
+	    addr = frame1->frame + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
+	  else if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_I0);
+	  else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_L0);
+	  else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+	    addr = frame1->frame + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
+	  else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + 32)
+	    addr = frame1->frame + (regnum - FP0_REGNUM) * 4
+	      - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+	  else if (regnum >= FP0_REGNUM + 32 && regnum < FP_MAX_REGNUM)
+	    addr = frame1->frame + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+	      - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
+	  else if (regnum >= Y_REGNUM && regnum < NUM_REGS)
+	    addr = frame1->frame + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
+	}
+      else if (frame1->flat)
+	{
+
+	  if (regnum == RP_REGNUM)
+	    addr = frame1->pc_addr;
+	  else if (regnum == I7_REGNUM)
+	    addr = frame1->fp_addr;
+	  else
+	    {
+	      CORE_ADDR func_start;
+	      struct frame_saved_regs regs;
+	      memset (&regs, 0, sizeof (regs));
+
+	      find_pc_partial_function (frame1->pc, NULL, &func_start, NULL);
+	      examine_prologue (func_start, 0, frame1, &regs);
+	      addr = regs.regs[regnum];
+	    }
+	}
+      else
+	{
+	  /* Normal frame.  Local and In registers are saved on stack.  */
+	  if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_I0);
+	  else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_L0);
+	  else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+	    {
+	      /* Outs become ins.  */
+	      get_saved_register (raw_buffer, optimized, addrp, frame1,
+				  (regnum - O0_REGNUM + I0_REGNUM), lval);
+	      return;
+	    }
+	}
+      if (addr != 0)
+	break;
+      frame1 = frame1->next;
+    }
+  if (addr != 0)
+    {
+      if (lval != NULL)
+	*lval = lval_memory;
+      if (regnum == SP_REGNUM)
+	{
+	  if (raw_buffer != NULL)
+	    {
+	      /* Put it back in target format.  */
+	      store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), addr);
+	    }
+	  if (addrp != NULL)
+	    *addrp = 0;
+	  return;
+	}
+      if (raw_buffer != NULL)
+	read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
+    }
+  else
+    {
+      if (lval != NULL)
+	*lval = lval_register;
+      addr = REGISTER_BYTE (regnum);
+      if (raw_buffer != NULL)
+	read_register_gen (regnum, raw_buffer);
+    }
+  if (addrp != NULL)
+    *addrp = addr;
+}
+
+/* Push an empty stack frame, and record in it the current PC, regs, etc.
+
+   We save the non-windowed registers and the ins.  The locals and outs
+   are new; they don't need to be saved. The i's and l's of
+   the last frame were already saved on the stack.  */
+
+/* Definitely see tm-sparc.h for more doc of the frame format here.  */
+
+#ifdef GDB_TARGET_IS_SPARC64
+#define DUMMY_REG_SAVE_OFFSET (128 + 16)
+#else
+#define DUMMY_REG_SAVE_OFFSET 0x60
+#endif
+
+/* See tm-sparc.h for how this is calculated.  */
+#ifdef FP0_REGNUM
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) + (32 * REGISTER_RAW_SIZE (FP0_REGNUM)))
+#else
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) )
+#endif /* FP0_REGNUM */
+#define DUMMY_STACK_SIZE (DUMMY_STACK_REG_BUF_SIZE + DUMMY_REG_SAVE_OFFSET)
+
+void
+sparc_push_dummy_frame ()
+{
+  CORE_ADDR sp, old_sp;
+  char register_temp[DUMMY_STACK_SIZE];
+
+  old_sp = sp = read_register (SP_REGNUM);
+
+#ifdef GDB_TARGET_IS_SPARC64
+  /* FIXME: not sure what needs to be saved here.  */
+#else
+  /* Y, PS, WIM, TBR, PC, NPC, FPS, CPS regs */
+  read_register_bytes (REGISTER_BYTE (Y_REGNUM), &register_temp[0],
+		       REGISTER_RAW_SIZE (Y_REGNUM) * 8);
+#endif
+
+  read_register_bytes (REGISTER_BYTE (O0_REGNUM),
+		       &register_temp[8 * SPARC_INTREG_SIZE],
+		       SPARC_INTREG_SIZE * 8);
+
+  read_register_bytes (REGISTER_BYTE (G0_REGNUM),
+		       &register_temp[16 * SPARC_INTREG_SIZE],
+		       SPARC_INTREG_SIZE * 8);
+
+#ifdef FP0_REGNUM
+  read_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+		       &register_temp[24 * SPARC_INTREG_SIZE],
+		       FP_REGISTER_BYTES);
+#endif /* FP0_REGNUM */
+
+  sp -= DUMMY_STACK_SIZE;
+
+  write_register (SP_REGNUM, sp);
+
+  write_memory (sp + DUMMY_REG_SAVE_OFFSET, &register_temp[0],
+		DUMMY_STACK_REG_BUF_SIZE);
+
+  write_register (FP_REGNUM, old_sp);
+
+  /* Set return address register for the call dummy to the current PC.  */
+  write_register (I7_REGNUM, read_pc() - 8);
+}
+
+/* sparc_frame_find_saved_regs ().  This function is here only because
+   pop_frame uses it.  Note there is an interesting corner case which
+   I think few ports of GDB get right--if you are popping a frame
+   which does not save some register that *is* saved by a more inner
+   frame (such a frame will never be a dummy frame because dummy
+   frames save all registers).  Rewriting pop_frame to use
+   get_saved_register would solve this problem and also get rid of the
+   ugly duplication between sparc_frame_find_saved_regs and
+   get_saved_register.
+
+   Stores, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   Note that on register window machines, we are currently making the
+   assumption that window registers are being saved somewhere in the
+   frame in which they are being used.  If they are stored in an
+   inferior frame, find_saved_register will break.
+
+   On the Sun 4, the only time all registers are saved is when
+   a dummy frame is involved.  Otherwise, the only saved registers
+   are the LOCAL and IN registers which are saved as a result
+   of the "save/restore" opcodes.  This condition is determined
+   by address rather than by value.
+
+   The "pc" is not stored in a frame on the SPARC.  (What is stored
+   is a return address minus 8.)  sparc_pop_frame knows how to
+   deal with that.  Other routines might or might not.
+
+   See tm-sparc.h (PUSH_FRAME and friends) for CRITICAL information
+   about how this works.  */
+
+static void sparc_frame_find_saved_regs PARAMS ((struct frame_info *,
+						 struct frame_saved_regs *));
+
+static void
+sparc_frame_find_saved_regs (fi, saved_regs_addr)
+     struct frame_info *fi;
+     struct frame_saved_regs *saved_regs_addr;
+{
+  register int regnum;
+  CORE_ADDR frame_addr = FRAME_FP (fi);
+
+  if (!fi)
+    fatal ("Bad frame info struct in FRAME_FIND_SAVED_REGS");
+
+  memset (saved_regs_addr, 0, sizeof (*saved_regs_addr));
+
+  if (fi->pc >= (fi->bottom ? fi->bottom :
+		   read_register (SP_REGNUM))
+      && fi->pc <= FRAME_FP(fi))
+    {
+      /* Dummy frame.  All but the window regs are in there somewhere. */
+      for (regnum = G1_REGNUM; regnum < G1_REGNUM+7; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+	    - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+	    - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
+      for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 32; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - FP0_REGNUM) * 4
+	    - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+      for (regnum = FP0_REGNUM + 32; regnum < FP_MAX_REGNUM; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+	    - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
+      for (regnum = Y_REGNUM; regnum < NUM_REGS; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE - 0xe0;
+	    - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
+      frame_addr = fi->bottom ?
+	fi->bottom : read_register (SP_REGNUM);
+    }
+  else if (fi->flat)
+    {
+      CORE_ADDR func_start;
+      find_pc_partial_function (fi->pc, NULL, &func_start, NULL);
+      examine_prologue (func_start, 0, fi, saved_regs_addr);
+
+      /* Flat register window frame.  */
+      saved_regs_addr->regs[RP_REGNUM] = fi->pc_addr;
+      saved_regs_addr->regs[I7_REGNUM] = fi->fp_addr;
+    }
+  else
+    {
+      /* Normal frame.  Just Local and In registers */
+      frame_addr = fi->bottom ?
+	fi->bottom : read_register (SP_REGNUM);
+      for (regnum = L0_REGNUM; regnum < L0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  (frame_addr + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+	   + FRAME_SAVED_L0);
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  (frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+	   + FRAME_SAVED_I0);
+    }
+  if (fi->next)
+    {
+      if (fi->flat)
+	{
+	  saved_regs_addr->regs[O7_REGNUM] = fi->pc_addr;
+	}
+      else
+	{
+	  /* Pull off either the next frame pointer or the stack pointer */
+	  CORE_ADDR next_next_frame_addr =
+	    (fi->next->bottom ?
+	     fi->next->bottom :
+	     read_register (SP_REGNUM));
+	  for (regnum = O0_REGNUM; regnum < O0_REGNUM+8; regnum++)
+	    saved_regs_addr->regs[regnum] =
+	      (next_next_frame_addr
+	       + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+	       + FRAME_SAVED_I0);
+	}
+    }
+  /* Otherwise, whatever we would get from ptrace(GETREGS) is accurate */
+  saved_regs_addr->regs[SP_REGNUM] = FRAME_FP (fi);
+}
+
+/* Discard from the stack the innermost frame, restoring all saved registers.
+
+   Note that the values stored in fsr by get_frame_saved_regs are *in
+   the context of the called frame*.  What this means is that the i
+   regs of fsr must be restored into the o regs of the (calling) frame that
+   we pop into.  We don't care about the output regs of the calling frame,
+   since unless it's a dummy frame, it won't have any output regs in it.
+
+   We never have to bother with %l (local) regs, since the called routine's
+   locals get tossed, and the calling routine's locals are already saved
+   on its stack.  */
+
+/* Definitely see tm-sparc.h for more doc of the frame format here.  */
+
+void
+sparc_pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR pc;
+  struct frame_saved_regs fsr;
+  char raw_buffer[REGISTER_BYTES];
+  int regnum;
+
+  sparc_frame_find_saved_regs (frame, &fsr);
+#ifdef FP0_REGNUM
+  if (fsr.regs[FP0_REGNUM])
+    {
+      read_memory (fsr.regs[FP0_REGNUM], raw_buffer, FP_REGISTER_BYTES);
+      write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+			    raw_buffer, FP_REGISTER_BYTES);
+    }
+#ifndef GDB_TARGET_IS_SPARC64
+  if (fsr.regs[FPS_REGNUM])
+    {
+      read_memory (fsr.regs[FPS_REGNUM], raw_buffer, 4);
+      write_register_bytes (REGISTER_BYTE (FPS_REGNUM), raw_buffer, 4);
+    }
+  if (fsr.regs[CPS_REGNUM])
+    {
+      read_memory (fsr.regs[CPS_REGNUM], raw_buffer, 4);
+      write_register_bytes (REGISTER_BYTE (CPS_REGNUM), raw_buffer, 4);
+    }
+#endif
+#endif /* FP0_REGNUM */
+  if (fsr.regs[G1_REGNUM])
+    {
+      read_memory (fsr.regs[G1_REGNUM], raw_buffer, 7 * SPARC_INTREG_SIZE);
+      write_register_bytes (REGISTER_BYTE (G1_REGNUM), raw_buffer,
+			    7 * SPARC_INTREG_SIZE);
+    }
+
+  if (frame->flat)
+    {
+      /* Each register might or might not have been saved, need to test
+	 individually.  */
+      for (regnum = L0_REGNUM; regnum < L0_REGNUM + 8; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM + 8; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+
+      /* Handle all outs except stack pointer (o0-o5; o7).  */
+      for (regnum = O0_REGNUM; regnum < O0_REGNUM + 6; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+      if (fsr.regs[O0_REGNUM + 7])
+	write_register (O0_REGNUM + 7,
+			read_memory_integer (fsr.regs[O0_REGNUM + 7],
+					     SPARC_INTREG_SIZE));
+
+      write_register (SP_REGNUM, frame->frame);
+    }
+  else if (fsr.regs[I0_REGNUM])
+    {
+      CORE_ADDR sp;
+
+      char reg_temp[REGISTER_BYTES];
+
+      read_memory (fsr.regs[I0_REGNUM], raw_buffer, 8 * SPARC_INTREG_SIZE);
+
+      /* Get the ins and locals which we are about to restore.  Just
+	 moving the stack pointer is all that is really needed, except
+	 store_inferior_registers is then going to write the ins and
+	 locals from the registers array, so we need to muck with the
+	 registers array.  */
+      sp = fsr.regs[SP_REGNUM];
+      read_memory (sp, reg_temp, SPARC_INTREG_SIZE * 16);
+
+      /* Restore the out registers.
+	 Among other things this writes the new stack pointer.  */
+      write_register_bytes (REGISTER_BYTE (O0_REGNUM), raw_buffer,
+			    SPARC_INTREG_SIZE * 8);
+
+      write_register_bytes (REGISTER_BYTE (L0_REGNUM), reg_temp,
+			    SPARC_INTREG_SIZE * 16);
+    }
+#ifndef GDB_TARGET_IS_SPARC64
+  if (fsr.regs[PS_REGNUM])
+    write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4));
+#endif
+  if (fsr.regs[Y_REGNUM])
+    write_register (Y_REGNUM, read_memory_integer (fsr.regs[Y_REGNUM], REGISTER_RAW_SIZE (Y_REGNUM)));
+  if (fsr.regs[PC_REGNUM])
+    {
+      /* Explicitly specified PC (and maybe NPC) -- just restore them. */
+      write_register (PC_REGNUM, read_memory_integer (fsr.regs[PC_REGNUM],
+						      REGISTER_RAW_SIZE (PC_REGNUM)));
+      if (fsr.regs[NPC_REGNUM])
+	write_register (NPC_REGNUM,
+			read_memory_integer (fsr.regs[NPC_REGNUM],
+					     REGISTER_RAW_SIZE (NPC_REGNUM)));
+    }
+  else if (frame->flat)
+    {
+      if (frame->pc_addr)
+	pc = PC_ADJUST ((CORE_ADDR)
+			read_memory_integer (frame->pc_addr,
+					     REGISTER_RAW_SIZE (PC_REGNUM)));
+      else
+	{
+	  /* I think this happens only in the innermost frame, if so then
+	     it is a complicated way of saying
+	     "pc = read_register (O7_REGNUM);".  */
+	  char buf[MAX_REGISTER_RAW_SIZE];
+	  get_saved_register (buf, 0, 0, frame, O7_REGNUM, 0);
+	  pc = PC_ADJUST (extract_address
+			  (buf, REGISTER_RAW_SIZE (O7_REGNUM)));
+	}
+
+      write_register (PC_REGNUM,  pc);
+      write_register (NPC_REGNUM, pc + 4);
+    }
+  else if (fsr.regs[I7_REGNUM])
+    {
+      /* Return address in %i7 -- adjust it, then restore PC and NPC from it */
+      pc = PC_ADJUST ((CORE_ADDR) read_memory_integer (fsr.regs[I7_REGNUM],
+						       SPARC_INTREG_SIZE));
+      write_register (PC_REGNUM,  pc);
+      write_register (NPC_REGNUM, pc + 4);
+    }
+  flush_cached_frames ();
+}
+
+/* On the Sun 4 under SunOS, the compile will leave a fake insn which
+   encodes the structure size being returned.  If we detect such
+   a fake insn, step past it.  */
+
+CORE_ADDR
+sparc_pc_adjust(pc)
+     CORE_ADDR pc;
+{
+  unsigned long insn;
+  char buf[4];
+  int err;
+
+  err = target_read_memory (pc + 8, buf, sizeof(long));
+  insn = extract_unsigned_integer (buf, 4);
+  if ((err == 0) && (insn & 0xffc00000) == 0)
+    return pc+12;
+  else
+    return pc+8;
+}
+
+/* If pc is in a shared library trampoline, return its target.
+   The SunOs 4.x linker rewrites the jump table entries for PIC
+   compiled modules in the main executable to bypass the dynamic linker
+   with jumps of the form
+	sethi %hi(addr),%g1
+	jmp %g1+%lo(addr)
+   and removes the corresponding jump table relocation entry in the
+   dynamic relocations.
+   find_solib_trampoline_target relies on the presence of the jump
+   table relocation entry, so we have to detect these jump instructions
+   by hand.  */
+
+CORE_ADDR
+sunos4_skip_trampoline_code (pc)
+     CORE_ADDR pc;
+{
+  unsigned long insn1;
+  char buf[4];
+  int err;
+
+  err = target_read_memory (pc, buf, 4);
+  insn1 = extract_unsigned_integer (buf, 4);
+  if (err == 0 && (insn1 & 0xffc00000) == 0x03000000)
+    {
+      unsigned long insn2;
+
+      err = target_read_memory (pc + 4, buf, 4);
+      insn2 = extract_unsigned_integer (buf, 4);
+      if (err == 0 && (insn2 & 0xffffe000) == 0x81c06000)
+	{
+	  CORE_ADDR target_pc = (insn1 & 0x3fffff) << 10;
+	  int delta = insn2 & 0x1fff;
+
+	  /* Sign extend the displacement.  */
+	  if (delta & 0x1000)
+	    delta |= ~0x1fff;
+	  return target_pc + delta;
+	}
+    }
+  return find_solib_trampoline_target (pc);
+}
+
+#ifdef USE_PROC_FS	/* Target dependent support for /proc */
+
+/*  The /proc interface divides the target machine's register set up into
+    two different sets, the general register set (gregset) and the floating
+    point register set (fpregset).  For each set, there is an ioctl to get
+    the current register set and another ioctl to set the current values.
+
+    The actual structure passed through the ioctl interface is, of course,
+    naturally machine dependent, and is different for each set of registers.
+    For the sparc for example, the general register set is typically defined
+    by:
+
+	typedef int gregset_t[38];
+
+	#define	R_G0	0
+	...
+	#define	R_TBR	37
+
+    and the floating point set by:
+
+	typedef struct prfpregset {
+		union { 
+			u_long  pr_regs[32]; 
+			double  pr_dregs[16];
+		} pr_fr;
+		void *  pr_filler;
+		u_long  pr_fsr;
+		u_char  pr_qcnt;
+		u_char  pr_q_entrysize;
+		u_char  pr_en;
+		u_long  pr_q[64];
+	} prfpregset_t;
+
+    These routines provide the packing and unpacking of gregset_t and
+    fpregset_t formatted data.
+
+ */
+
+/* Given a pointer to a general register set in /proc format (gregset_t *),
+   unpack the register contents and supply them as gdb's idea of the current
+   register values. */
+
+void
+supply_gregset (gregsetp)
+prgregset_t *gregsetp;
+{
+  register int regi;
+  register prgreg_t *regp = (prgreg_t *) gregsetp;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  /* GDB register numbers for Gn, On, Ln, In all match /proc reg numbers.  */
+  for (regi = G0_REGNUM ; regi <= I7_REGNUM ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regi));
+    }
+
+  /* These require a bit more care.  */
+  supply_register (PS_REGNUM, (char *) (regp + R_PS));
+  supply_register (PC_REGNUM, (char *) (regp + R_PC));
+  supply_register (NPC_REGNUM,(char *) (regp + R_nPC));
+  supply_register (Y_REGNUM,  (char *) (regp + R_Y));
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (WIM_REGNUM, zerobuf);
+  supply_register (TBR_REGNUM, zerobuf);
+  supply_register (CPS_REGNUM, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+prgregset_t *gregsetp;
+int regno;
+{
+  int regi;
+  register prgreg_t *regp = (prgreg_t *) gregsetp;
+
+  for (regi = 0 ; regi <= R_I7 ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regi) = *(int *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+  if ((regno == -1) || (regno == PS_REGNUM))
+    {
+      *(regp + R_PS) = *(int *) &registers[REGISTER_BYTE (PS_REGNUM)];
+    }
+  if ((regno == -1) || (regno == PC_REGNUM))
+    {
+      *(regp + R_PC) = *(int *) &registers[REGISTER_BYTE (PC_REGNUM)];
+    }
+  if ((regno == -1) || (regno == NPC_REGNUM))
+    {
+      *(regp + R_nPC) = *(int *) &registers[REGISTER_BYTE (NPC_REGNUM)];
+    }
+  if ((regno == -1) || (regno == Y_REGNUM))
+    {
+      *(regp + R_Y) = *(int *) &registers[REGISTER_BYTE (Y_REGNUM)];
+    }
+}
+
+#if defined (FP0_REGNUM)
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+prfpregset_t *fpregsetp;
+{
+  register int regi;
+  char *from;
+  
+  for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
+    {
+      from = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
+      supply_register (regi, from);
+    }
+  supply_register (FPS_REGNUM, (char *) &(fpregsetp->pr_fsr));
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), update the register specified by REGNO from gdb's idea
+    of the current floating point register set.  If REGNO is -1, update
+    them all. */
+/* ??? This will probably need some changes for sparc64.  */
+
+void
+fill_fpregset (fpregsetp, regno)
+prfpregset_t *fpregsetp;
+int regno;
+{
+  int regi;
+  char *to;
+  char *from;
+
+  for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
+	  memcpy (to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+  if ((regno == -1) || (regno == FPS_REGNUM))
+    {
+      fpregsetp->pr_fsr = *(int *) &registers[REGISTER_BYTE (FPS_REGNUM)];
+    }
+}
+
+#endif	/* defined (FP0_REGNUM) */
+
+#endif  /* USE_PROC_FS */
+
+
+#ifdef GET_LONGJMP_TARGET
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  CORE_ADDR jb_addr;
+#define LONGJMP_TARGET_SIZE 4
+  char buf[LONGJMP_TARGET_SIZE];
+
+  jb_addr = read_register (O0_REGNUM);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  LONGJMP_TARGET_SIZE))
+    return 0;
+
+  *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
+
+  return 1;
+}
+#endif /* GET_LONGJMP_TARGET */
+
+#ifdef STATIC_TRANSFORM_NAME
+/* SunPRO (3.0 at least), encodes the static variables.  This is not
+   related to C++ mangling, it is done for C too.  */
+
+char *
+sunpro_static_transform_name (name)
+     char *name;
+{
+  char *p;
+  if (name[0] == '$')
+    {
+      /* For file-local statics there will be a dollar sign, a bunch
+	 of junk (the contents of which match a string given in the
+	 N_OPT), a period and the name.  For function-local statics
+	 there will be a bunch of junk (which seems to change the
+	 second character from 'A' to 'B'), a period, the name of the
+	 function, and the name.  So just skip everything before the
+	 last period.  */
+      p = strrchr (name, '.');
+      if (p != NULL)
+	name = p + 1;
+    }
+  return name;
+}
+#endif /* STATIC_TRANSFORM_NAME */
+
+#ifdef GDB_TARGET_IS_SPARC64
+
+/* Utilities for printing registers.
+   Page numbers refer to the SPARC Architecture Manual.  */
+
+static void dump_ccreg PARAMS ((char *, int));
+
+static void
+dump_ccreg (reg, val)
+     char *reg;
+     int val;
+{
+  /* page 41 */
+  printf_unfiltered ("%s:%s,%s,%s,%s", reg,
+	  val & 8 ? "N" : "NN",
+	  val & 4 ? "Z" : "NZ",
+	  val & 2 ? "O" : "NO",
+	  val & 1 ? "C" : "NC"
+  );
+}
+
+static char *
+decode_asi (val)
+     int val;
+{
+  /* page 72 */
+  switch (val)
+    {
+    case 4 : return "ASI_NUCLEUS";
+    case 0x0c : return "ASI_NUCLEUS_LITTLE";
+    case 0x10 : return "ASI_AS_IF_USER_PRIMARY";
+    case 0x11 : return "ASI_AS_IF_USER_SECONDARY";
+    case 0x18 : return "ASI_AS_IF_USER_PRIMARY_LITTLE";
+    case 0x19 : return "ASI_AS_IF_USER_SECONDARY_LITTLE";
+    case 0x80 : return "ASI_PRIMARY";
+    case 0x81 : return "ASI_SECONDARY";
+    case 0x82 : return "ASI_PRIMARY_NOFAULT";
+    case 0x83 : return "ASI_SECONDARY_NOFAULT";
+    case 0x88 : return "ASI_PRIMARY_LITTLE";
+    case 0x89 : return "ASI_SECONDARY_LITTLE";
+    case 0x8a : return "ASI_PRIMARY_NOFAULT_LITTLE";
+    case 0x8b : return "ASI_SECONDARY_NOFAULT_LITTLE";
+    default : return NULL;
+    }
+}
+
+/* PRINT_REGISTER_HOOK routine.
+   Pretty print various registers.  */
+/* FIXME: Would be nice if this did some fancy things for 32 bit sparc.  */
+
+void
+sparc_print_register_hook (regno)
+     int regno;
+{
+  unsigned LONGEST val;
+
+  /* Handle double/quad versions of lower 32 fp regs.  */
+  if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32
+      && (regno & 1) == 0)
+    {
+      char value[16];
+
+      if (!read_relative_register_raw_bytes (regno, value)
+	  && !read_relative_register_raw_bytes (regno + 1, value + 4))
+	{
+	  printf_unfiltered ("\t");
+	  print_floating (value, builtin_type_double, gdb_stdout);
+	}
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+      if ((regno & 3) == 0)
+	{
+	  if (!read_relative_register_raw_bytes (regno + 2, value + 8)
+	      && !read_relative_register_raw_bytes (regno + 3, value + 12))
+	    {
+	      printf_unfiltered ("\t");
+	      print_floating (value, builtin_type_long_double, gdb_stdout);
+	    }
+	}
+#endif
+      return;
+    }
+
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+  /* Print upper fp regs as long double if appropriate.  */
+  if (regno >= FP0_REGNUM + 32 && regno < FP_MAX_REGNUM
+      /* We test for even numbered regs and not a multiple of 4 because
+	 the upper fp regs are recorded as doubles.  */
+      && (regno & 1) == 0)
+    {
+      char value[16];
+
+      if (!read_relative_register_raw_bytes (regno, value)
+	  && !read_relative_register_raw_bytes (regno + 1, value + 8))
+	{
+	  printf_unfiltered ("\t");
+	  print_floating (value, builtin_type_long_double, gdb_stdout);
+	}
+      return;
+    }
+#endif
+
+  /* FIXME: Some of these are priviledged registers.
+     Not sure how they should be handled.  */
+
+#define BITS(n, mask) ((int) (((val) >> (n)) & (mask)))
+
+  val = read_register (regno);
+
+  /* pages 40 - 60 */
+  switch (regno)
+    {
+    case CCR_REGNUM :
+      printf_unfiltered("\t");
+      dump_ccreg ("xcc", val >> 4);
+      printf_unfiltered(", ");
+      dump_ccreg ("icc", val & 15);
+      break;
+    case FPRS_REGNUM :
+      printf ("\tfef:%d, du:%d, dl:%d",
+	      BITS (2, 1), BITS (1, 1), BITS (0, 1));
+      break;
+    case FSR_REGNUM :
+      {
+	static char *fcc[4] = { "=", "<", ">", "?" };
+	static char *rd[4] = { "N", "0", "+", "-" };
+	/* Long, yes, but I'd rather leave it as is and use a wide screen.  */
+	printf ("\t0:%s, 1:%s, 2:%s, 3:%s, rd:%s, tem:%d, ns:%d, ver:%d, ftt:%d, qne:%d, aexc:%d, cexc:%d",
+		fcc[BITS (10, 3)], fcc[BITS (32, 3)],
+		fcc[BITS (34, 3)], fcc[BITS (36, 3)],
+		rd[BITS (30, 3)], BITS (23, 31), BITS (22, 1), BITS (17, 7),
+		BITS (14, 7), BITS (13, 1), BITS (5, 31), BITS (0, 31));
+	break;
+      }
+    case ASI_REGNUM :
+      {
+	char *asi = decode_asi (val);
+	if (asi != NULL)
+	  printf ("\t%s", asi);
+	break;
+      }
+    case VER_REGNUM :
+      printf ("\tmanuf:%d, impl:%d, mask:%d, maxtl:%d, maxwin:%d",
+	      BITS (48, 0xffff), BITS (32, 0xffff),
+	      BITS (24, 0xff), BITS (8, 0xff), BITS (0, 31));
+      break;
+    case PSTATE_REGNUM :
+      {
+	static char *mm[4] = { "tso", "pso", "rso", "?" };
+	printf ("\tcle:%d, tle:%d, mm:%s, red:%d, pef:%d, am:%d, priv:%d, ie:%d, ag:%d",
+		BITS (9, 1), BITS (8, 1), mm[BITS (6, 3)], BITS (5, 1),
+		BITS (4, 1), BITS (3, 1), BITS (2, 1), BITS (1, 1),
+		BITS (0, 1));
+	break;
+      }
+    case TSTATE_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TT_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TPC_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TNPC_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case WSTATE_REGNUM :
+      printf ("\tother:%d, normal:%d", BITS (3, 7), BITS (0, 7));
+      break;
+    case CWP_REGNUM :
+      printf ("\t%d", BITS (0, 31));
+      break;
+    case CANSAVE_REGNUM :
+      printf ("\t%-2d before spill", BITS (0, 31));
+      break;
+    case CANRESTORE_REGNUM :
+      printf ("\t%-2d before fill", BITS (0, 31));
+      break;
+    case CLEANWIN_REGNUM :
+      printf ("\t%-2d before clean", BITS (0, 31));
+      break;
+    case OTHERWIN_REGNUM :
+      printf ("\t%d", BITS (0, 31));
+      break;
+    }
+
+#undef BITS
+}
+
+#endif
+
+void
+_initialize_sparc_tdep ()
+{
+  tm_print_insn = print_insn_sparc;
+  tm_print_insn_info.mach = TM_PRINT_INSN_MACH;  /* Selects sparc/sparclite */
+}