stock perl 5.6.1

1 files changed, 3219 insertions, 0 deletions

diff --git a/gnu/usr.bin/perl/vos/config.ga.h b/gnu/usr.bin/perl/vos/config.ga.h
new file mode 100644
index 00000000000..ea4ef08cdb3
--- /dev/null
+++ b/gnu/usr.bin/perl/vos/config.ga.h
@@ -0,0 +1,3219 @@
+/*
+ * This file was produced by running the config_h.SH script, which
+ * gets its values from config.sh, which is generally produced by
+ * running Configure.
+ *
+ * Feel free to modify any of this as the need arises.  Note, however,
+ * that running config_h.SH again will wipe out any changes you've made.
+ * For a more permanent change edit config.sh and rerun config_h.SH.
+ *
+ * \$Id: config.ga.h,v 1.1 2001/05/24 18:26:14 millert Exp $
+ */
+
+/*
+ * Package name      : perl5
+ * Source directory  : /vos_ftp_site/pub/vos/posix/(alpha|ga)/perl
+ * Configuration time: 2001-02-12 21:00 UTC
+ * Configured by     : Paul_Green@stratus.com
+ * Target system     : VOS
+ */
+
+#ifndef _config_h_
+#define _config_h_
+
+/* LOC_SED:
+ *	This symbol holds the complete pathname to the sed program.
+ */
+#define LOC_SED 	"/system/ported/command_library/sed.pm"	/**/
+
+/* HAS_ALARM:
+ *	This symbol, if defined, indicates that the alarm routine is
+ *	available.
+ */
+#define HAS_ALARM		/**/
+
+/* HASATTRIBUTE:
+ *	This symbol indicates the C compiler can check for function attributes,
+ *	such as printf formats. This is normally only supported by GNU cc.
+ */
+/*#define HASATTRIBUTE 	/**/
+#ifndef HASATTRIBUTE
+#define __attribute__(_arg_)
+#endif
+
+/* HAS_BCMP:
+ *	This symbol is defined if the bcmp() routine is available to
+ *	compare blocks of memory.
+ */
+/*#define HAS_BCMP	/**/
+
+/* HAS_BCOPY:
+ *	This symbol is defined if the bcopy() routine is available to
+ *	copy blocks of memory.
+ */
+/*#define HAS_BCOPY	/**/
+
+/* HAS_BZERO:
+ *	This symbol is defined if the bzero() routine is available to
+ *	set a memory block to 0.
+ */
+/*#define HAS_BZERO	/**/
+
+/* HAS_CHOWN:
+ *	This symbol, if defined, indicates that the chown routine is
+ *	available.
+ */
+#define HAS_CHOWN		/**/
+
+/* HAS_CHROOT:
+ *	This symbol, if defined, indicates that the chroot routine is
+ *	available.
+ */
+/*#define HAS_CHROOT		/**/
+
+/* HAS_CHSIZE:
+ *	This symbol, if defined, indicates that the chsize routine is available
+ *	to truncate files.  You might need a -lx to get this routine.
+ */
+/*#define	HAS_CHSIZE		/**/
+
+/* HASCONST:
+ *	This symbol, if defined, indicates that this C compiler knows about
+ *	the const type. There is no need to actually test for that symbol
+ *	within your programs. The mere use of the "const" keyword will
+ *	trigger the necessary tests.
+ */
+#define HASCONST	/**/
+#ifndef HASCONST
+#define const
+#endif
+
+/* HAS_CRYPT:
+ *	This symbol, if defined, indicates that the crypt routine is available
+ *	to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT		/**/
+
+/* HAS_CUSERID:
+ *	This symbol, if defined, indicates that the cuserid routine is
+ *	available to get character login names.
+ */
+/*#define HAS_CUSERID		/**/
+
+/* HAS_DBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol DBL_DIG, which is the number
+ *	of significant digits in a double precision number.  If this
+ *	symbol is not defined, a guess of 15 is usually pretty good.
+ */
+#define HAS_DBL_DIG 	/* */
+
+/* HAS_DIFFTIME:
+ *	This symbol, if defined, indicates that the difftime routine is
+ *	available.
+ */
+#define HAS_DIFFTIME		/**/
+
+/* HAS_DLERROR:
+ *	This symbol, if defined, indicates that the dlerror routine is
+ *	available to return a string describing the last error that
+ *	occurred from a call to dlopen(), dlclose() or dlsym().
+ */
+/*#define HAS_DLERROR	/**/
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ *	This symbol, if defined, indicates that the bug that prevents
+ *	setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ *	This symbol, if defined, indicates that the C program should
+ *	check the script that it is executing for setuid/setgid bits, and
+ *	attempt to emulate setuid/setgid on systems that have disabled
+ *	setuid #! scripts because the kernel can't do it securely.
+ *	It is up to the package designer to make sure that this emulation
+ *	is done securely.  Among other things, it should do an fstat on
+ *	the script it just opened to make sure it really is a setuid/setgid
+ *	script, it should make sure the arguments passed correspond exactly
+ *	to the argument on the #! line, and it should not trust any
+ *	subprocesses to which it must pass the filename rather than the
+ *	file descriptor of the script to be executed.
+ */
+#define SETUID_SCRIPTS_ARE_SECURE_NOW	/**/
+/*#define DOSUID		/**/
+
+/* HAS_DUP2:
+ *	This symbol, if defined, indicates that the dup2 routine is
+ *	available to duplicate file descriptors.
+ */
+#define HAS_DUP2	/**/
+
+/* HAS_FCHMOD:
+ *	This symbol, if defined, indicates that the fchmod routine is available
+ *	to change mode of opened files.  If unavailable, use chmod().
+ */
+#define HAS_FCHMOD		/**/
+
+/* HAS_FCHOWN:
+ *	This symbol, if defined, indicates that the fchown routine is available
+ *	to change ownership of opened files.  If unavailable, use chown().
+ */
+/*#define HAS_FCHOWN		/**/
+
+/* HAS_FCNTL:
+ *	This symbol, if defined, indicates to the C program that
+ *	the fcntl() function exists.
+ */
+#define HAS_FCNTL		/**/
+
+/* HAS_FGETPOS:
+ *	This symbol, if defined, indicates that the fgetpos routine is
+ *	available to get the file position indicator, similar to ftell().
+ */
+#define HAS_FGETPOS	/**/
+
+/* HAS_FLOCK:
+ *	This symbol, if defined, indicates that the flock routine is
+ *	available to do file locking.
+ */
+/*#define HAS_FLOCK		/**/
+
+/* HAS_FORK:
+ *	This symbol, if defined, indicates that the fork routine is
+ *	available.
+ */
+#define HAS_FORK		/**/
+
+/* HAS_FSETPOS:
+ *	This symbol, if defined, indicates that the fsetpos routine is
+ *	available to set the file position indicator, similar to fseek().
+ */
+#define HAS_FSETPOS	/**/
+
+/* HAS_GETTIMEOFDAY:
+ *	This symbol, if defined, indicates that the gettimeofday() system
+ *	call is available for a sub-second accuracy clock. Usually, the file
+ *	<sys/resource.h> needs to be included (see I_SYS_RESOURCE).
+ *	The type "Timeval" should be used to refer to "struct timeval".
+ */
+/*#define HAS_GETTIMEOFDAY	/**/
+#ifdef HAS_GETTIMEOFDAY
+#define Timeval struct timeval	/* Structure used by gettimeofday() */
+#endif
+
+/* HAS_GETGROUPS:
+ *	This symbol, if defined, indicates that the getgroups() routine is
+ *	available to get the list of process groups.  If unavailable, multiple
+ *	groups are probably not supported.
+ */
+/*#define HAS_GETGROUPS		/**/
+
+/* HAS_GETLOGIN:
+ *	This symbol, if defined, indicates that the getlogin routine is
+ *	available to get the login name.
+ */
+#define HAS_GETLOGIN		/**/
+
+/* HAS_GETPGID:
+ *	This symbol, if defined, indicates to the C program that 
+ *	the getpgid(pid) function is available to get the
+ *	process group id.
+ */
+/*#define HAS_GETPGID		/**/
+
+/* HAS_GETPGRP2:
+ *	This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
+ *	routine is available to get the current process group.
+ */
+/*#define HAS_GETPGRP2		/**/
+
+/* HAS_GETPPID:
+ *	This symbol, if defined, indicates that the getppid routine is
+ *	available to get the parent process ID.
+ */
+#define HAS_GETPPID		/**/
+
+/* HAS_GETPRIORITY:
+ *	This symbol, if defined, indicates that the getpriority routine is
+ *	available to get a process's priority.
+ */
+/*#define HAS_GETPRIORITY		/**/
+
+/* HAS_INET_ATON:
+ *	This symbol, if defined, indicates to the C program that the
+ *	inet_aton() function is available to parse IP address "dotted-quad"
+ *	strings.
+ */
+/*#define HAS_INET_ATON		/**/
+
+/* HAS_KILLPG:
+ *	This symbol, if defined, indicates that the killpg routine is available
+ *	to kill process groups.  If unavailable, you probably should use kill
+ *	with a negative process number.
+ */
+/*#define HAS_KILLPG	/**/
+
+/* HAS_LINK:
+ *	This symbol, if defined, indicates that the link routine is
+ *	available to create hard links.
+ */
+/*#define HAS_LINK	/**/
+
+/* HAS_LOCALECONV:
+ *	This symbol, if defined, indicates that the localeconv routine is
+ *	available for numeric and monetary formatting conventions.
+ */
+#define HAS_LOCALECONV	/**/
+
+/* HAS_LOCKF:
+ *	This symbol, if defined, indicates that the lockf routine is
+ *	available to do file locking.
+ */
+#define HAS_LOCKF		/**/
+
+/* HAS_LSTAT:
+ *	This symbol, if defined, indicates that the lstat routine is
+ *	available to do file stats on symbolic links.
+ */
+#define HAS_LSTAT		/**/
+
+/* HAS_MBLEN:
+ *	This symbol, if defined, indicates that the mblen routine is available
+ *	to find the number of bytes in a multibye character.
+ */
+#define HAS_MBLEN		/**/
+
+/* HAS_MBSTOWCS:
+ *	This symbol, if defined, indicates that the mbstowcs routine is
+ *	available to covert a multibyte string into a wide character string.
+ */
+#define	HAS_MBSTOWCS		/**/
+
+/* HAS_MBTOWC:
+ *	This symbol, if defined, indicates that the mbtowc routine is available
+ *	to covert a multibyte to a wide character.
+ */
+#define HAS_MBTOWC		/**/
+
+/* HAS_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	to compare blocks of memory.
+ */
+#define HAS_MEMCMP	/**/
+
+/* HAS_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy blocks of memory.
+ */
+#define HAS_MEMCPY	/**/
+
+/* HAS_MEMMOVE:
+ *	This symbol, if defined, indicates that the memmove routine is available
+ *	to copy potentially overlapping blocks of memory. This should be used
+ *	only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
+ *	own version.
+ */
+#define HAS_MEMMOVE	/**/
+
+/* HAS_MEMSET:
+ *	This symbol, if defined, indicates that the memset routine is available
+ *	to set blocks of memory.
+ */
+#define HAS_MEMSET	/**/
+
+/* HAS_MKDIR:
+ *	This symbol, if defined, indicates that the mkdir routine is available
+ *	to create directories.  Otherwise you should fork off a new process to
+ *	exec /bin/mkdir.
+ */
+#define HAS_MKDIR		/**/
+
+/* HAS_MKFIFO:
+ *	This symbol, if defined, indicates that the mkfifo routine is
+ *	available to create FIFOs. Otherwise, mknod should be able to
+ *	do it for you. However, if mkfifo is there, mknod might require
+ *	super-user privileges which mkfifo will not.
+ */
+#define HAS_MKFIFO		/**/
+
+/* HAS_MKTIME:
+ *	This symbol, if defined, indicates that the mktime routine is
+ *	available.
+ */
+#define HAS_MKTIME		/**/
+
+/* HAS_MSYNC:
+ *	This symbol, if defined, indicates that the msync system call is
+ *	available to synchronize a mapped file.
+ */
+/*#define HAS_MSYNC		/**/
+
+/* HAS_MUNMAP:
+ *	This symbol, if defined, indicates that the munmap system call is
+ *	available to unmap a region, usually mapped by mmap().
+ */
+#define HAS_MUNMAP		/**/
+
+/* HAS_NICE:
+ *	This symbol, if defined, indicates that the nice routine is
+ *	available.
+ */
+/*#define HAS_NICE		/**/
+
+/* HAS_PATHCONF:
+ *	This symbol, if defined, indicates that pathconf() is available
+ *	to determine file-system related limits and options associated
+ *	with a given filename.
+ */
+/* HAS_FPATHCONF:
+ *	This symbol, if defined, indicates that pathconf() is available
+ *	to determine file-system related limits and options associated
+ *	with a given open file descriptor.
+ */
+#define HAS_PATHCONF		/**/
+#define HAS_FPATHCONF		/**/
+
+/* HAS_PAUSE:
+ *	This symbol, if defined, indicates that the pause routine is
+ *	available to suspend a process until a signal is received.
+ */
+#define HAS_PAUSE		/**/
+
+/* HAS_PIPE:
+ *	This symbol, if defined, indicates that the pipe routine is
+ *	available to create an inter-process channel.
+ */
+#define HAS_PIPE		/**/
+
+/* HAS_POLL:
+ *	This symbol, if defined, indicates that the poll routine is
+ *	available to poll active file descriptors. You may safely
+ *	include <poll.h> when this symbol is defined.
+ */
+#define HAS_POLL		/**/
+
+/* HAS_READDIR:
+ *	This symbol, if defined, indicates that the readdir routine is
+ *	available to read directory entries. You may have to include
+ *	<dirent.h>. See I_DIRENT.
+ */
+#define HAS_READDIR		/**/
+
+/* HAS_SEEKDIR:
+ *	This symbol, if defined, indicates that the seekdir routine is
+ *	available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+/*#define HAS_SEEKDIR		/**/
+
+/* HAS_TELLDIR:
+ *	This symbol, if defined, indicates that the telldir routine is
+ *	available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+/*#define HAS_TELLDIR		/**/
+
+/* HAS_REWINDDIR:
+ *	This symbol, if defined, indicates that the rewinddir routine is
+ *	available. You may have to include <dirent.h>. See I_DIRENT.
+ */
+#define HAS_REWINDDIR		/**/
+
+/* HAS_READLINK:
+ *	This symbol, if defined, indicates that the readlink routine is
+ *	available to read the value of a symbolic link.
+ */
+#define HAS_READLINK		/**/
+
+/* HAS_RENAME:
+ *	This symbol, if defined, indicates that the rename routine is available
+ *	to rename files.  Otherwise you should do the unlink(), link(), unlink()
+ *	trick.
+ */
+#define HAS_RENAME	/**/
+
+/* HAS_RMDIR:
+ *	This symbol, if defined, indicates that the rmdir routine is
+ *	available to remove directories. Otherwise you should fork off a
+ *	new process to exec /bin/rmdir.
+ */
+#define HAS_RMDIR		/**/
+
+/* HAS_SELECT:
+ *	This symbol, if defined, indicates that the select routine is
+ *	available to select active file descriptors. If the timeout field
+ *	is used, <sys/time.h> may need to be included.
+ */
+#define HAS_SELECT	/**/
+
+/* HAS_SETEGID:
+ *	This symbol, if defined, indicates that the setegid routine is available
+ *	to change the effective gid of the current program.
+ */
+#define HAS_SETEGID		/**/
+
+/* HAS_SETEUID:
+ *	This symbol, if defined, indicates that the seteuid routine is available
+ *	to change the effective uid of the current program.
+ */
+#define HAS_SETEUID		/**/
+
+/* HAS_SETLINEBUF:
+ *	This symbol, if defined, indicates that the setlinebuf routine is
+ *	available to change stderr or stdout from block-buffered or unbuffered
+ *	to a line-buffered mode.
+ */
+#define HAS_SETLINEBUF		/**/
+
+/* HAS_SETLOCALE:
+ *	This symbol, if defined, indicates that the setlocale routine is
+ *	available to handle locale-specific ctype implementations.
+ */
+#define HAS_SETLOCALE	/**/
+
+/* HAS_SETPGID:
+ *	This symbol, if defined, indicates that the setpgid(pid, gpid)
+ *	routine is available to set process group ID.
+ */
+#define HAS_SETPGID	/**/
+
+/* HAS_SETPGRP2:
+ *	This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
+ *	routine is available to set the current process group.
+ */
+/*#define HAS_SETPGRP2		/**/
+
+/* HAS_SETPRIORITY:
+ *	This symbol, if defined, indicates that the setpriority routine is
+ *	available to set a process's priority.
+ */
+/*#define HAS_SETPRIORITY		/**/
+
+/* HAS_SETREGID:
+ *	This symbol, if defined, indicates that the setregid routine is
+ *	available to change the real and effective gid of the current
+ *	process.
+ */
+/* HAS_SETRESGID:
+ *	This symbol, if defined, indicates that the setresgid routine is
+ *	available to change the real, effective and saved gid of the current
+ *	process.
+ */
+/*#define HAS_SETREGID		/**/
+/*#define HAS_SETRESGID		/**/
+
+/* HAS_SETREUID:
+ *	This symbol, if defined, indicates that the setreuid routine is
+ *	available to change the real and effective uid of the current
+ *	process.
+ */
+/* HAS_SETRESUID:
+ *	This symbol, if defined, indicates that the setresuid routine is
+ *	available to change the real, effective and saved uid of the current
+ *	process.
+ */
+/*#define HAS_SETREUID		/**/
+/*#define HAS_SETRESUID		/**/
+
+/* HAS_SETRGID:
+ *	This symbol, if defined, indicates that the setrgid routine is available
+ *	to change the real gid of the current program.
+ */
+/*#define HAS_SETRGID		/**/
+
+/* HAS_SETRUID:
+ *	This symbol, if defined, indicates that the setruid routine is available
+ *	to change the real uid of the current program.
+ */
+/*#define HAS_SETRUID		/**/
+
+/* HAS_SETSID:
+ *	This symbol, if defined, indicates that the setsid routine is
+ *	available to set the process group ID.
+ */
+#define HAS_SETSID	/**/
+
+/* Shmat_t:
+ *	This symbol holds the return type of the shmat() system call.
+ *	Usually set to 'void *' or 'char *'.
+ */
+/* HAS_SHMAT_PROTOTYPE:
+ *	This symbol, if defined, indicates that the sys/shm.h includes
+ *	a prototype for shmat().  Otherwise, it is up to the program to
+ *	guess one.  Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
+ *	but not always right so it should be emitted by the program only
+ *	when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+ */
+#define Shmat_t void *	/**/
+#define HAS_SHMAT_PROTOTYPE	/**/
+
+/* HAS_STRCHR:
+ *	This symbol is defined to indicate that the strchr()/strrchr()
+ *	functions are available for string searching. If not, try the
+ *	index()/rindex() pair.
+ */
+/* HAS_INDEX:
+ *	This symbol is defined to indicate that the index()/rindex()
+ *	functions are available for string searching.
+ */
+#define HAS_STRCHR	/**/
+/*#define HAS_INDEX	/**/
+
+/* HAS_STRCOLL:
+ *	This symbol, if defined, indicates that the strcoll routine is
+ *	available to compare strings using collating information.
+ */
+#define HAS_STRCOLL	/**/
+
+/* USE_STRUCT_COPY:
+ *	This symbol, if defined, indicates that this C compiler knows how
+ *	to copy structures.  If undefined, you'll need to use a block copy
+ *	routine of some sort instead.
+ */
+#define	USE_STRUCT_COPY	/**/
+
+/* HAS_STRTOD:
+ *	This symbol, if defined, indicates that the strtod routine is
+ *	available to provide better numeric string conversion than atof().
+ */
+#define HAS_STRTOD	/**/
+
+/* HAS_STRTOL:
+ *	This symbol, if defined, indicates that the strtol routine is available
+ *	to provide better numeric string conversion than atoi() and friends.
+ */
+#define HAS_STRTOL	/**/
+
+/* HAS_STRTOUL:
+ *	This symbol, if defined, indicates that the strtoul routine is
+ *	available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL	/**/
+
+/* HAS_STRXFRM:
+ *	This symbol, if defined, indicates that the strxfrm() routine is
+ *	available to transform strings.
+ */
+#define HAS_STRXFRM	/**/
+
+/* HAS_SYMLINK:
+ *	This symbol, if defined, indicates that the symlink routine is available
+ *	to create symbolic links.
+ */
+#define HAS_SYMLINK	/**/
+
+/* HAS_SYSCALL:
+ *	This symbol, if defined, indicates that the syscall routine is
+ *	available to call arbitrary system calls. If undefined, that's tough.
+ */
+/*#define HAS_SYSCALL	/**/
+
+/* HAS_SYSCONF:
+ *	This symbol, if defined, indicates that sysconf() is available
+ *	to determine system related limits and options.
+ */
+#define HAS_SYSCONF	/**/
+
+/* HAS_SYSTEM:
+ *	This symbol, if defined, indicates that the system routine is
+ *	available to issue a shell command.
+ */
+#define HAS_SYSTEM	/**/
+
+/* HAS_TCGETPGRP:
+ *	This symbol, if defined, indicates that the tcgetpgrp routine is
+ *	available to get foreground process group ID.
+ */
+#define HAS_TCGETPGRP		/**/
+
+/* HAS_TCSETPGRP:
+ *	This symbol, if defined, indicates that the tcsetpgrp routine is
+ *	available to set foreground process group ID.
+ */
+#define HAS_TCSETPGRP		/**/
+
+/* HAS_TRUNCATE:
+ *	This symbol, if defined, indicates that the truncate routine is
+ *	available to truncate files.
+ */
+/*#define HAS_TRUNCATE	/**/
+
+/* HAS_TZNAME:
+ *	This symbol, if defined, indicates that the tzname[] array is
+ *	available to access timezone names.
+ */
+#define HAS_TZNAME		/**/
+
+/* HAS_UMASK:
+ *	This symbol, if defined, indicates that the umask routine is
+ *	available to set and get the value of the file creation mask.
+ */
+#define HAS_UMASK		/**/
+
+/* HASVOLATILE:
+ *	This symbol, if defined, indicates that this C compiler knows about
+ *	the volatile declaration.
+ */
+#define	HASVOLATILE	/**/
+#ifndef HASVOLATILE
+#define volatile
+#endif
+
+/* HAS_WAIT4:
+ *	This symbol, if defined, indicates that wait4() exists.
+ */
+#define HAS_WAIT4	/**/
+
+/* HAS_WAITPID:
+ *	This symbol, if defined, indicates that the waitpid routine is
+ *	available to wait for child process.
+ */
+#define HAS_WAITPID	/**/
+
+/* HAS_WCSTOMBS:
+ *	This symbol, if defined, indicates that the wcstombs routine is
+ *	available to convert wide character strings to multibyte strings.
+ */
+#define HAS_WCSTOMBS	/**/
+
+/* HAS_WCTOMB:
+ *	This symbol, if defined, indicates that the wctomb routine is available
+ *	to covert a wide character to a multibyte.
+ */
+#define HAS_WCTOMB		/**/
+
+/* I_ARPA_INET:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <arpa/inet.h> to get inet_addr and friends declarations.
+ */
+#define	I_ARPA_INET		/**/
+
+/* I_DBM:
+ *	This symbol, if defined, indicates that <dbm.h> exists and should
+ *	be included.
+ */
+/* I_RPCSVC_DBM:
+ *	This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
+ *	should be included.
+ */
+/*#define I_DBM	/**/
+/*#define I_RPCSVC_DBM	/**/
+
+/* I_DIRENT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <dirent.h>. Using this symbol also triggers the definition
+ *	of the Direntry_t define which ends up being 'struct dirent' or
+ *	'struct direct' depending on the availability of <dirent.h>.
+ */
+/* DIRNAMLEN:
+ *	This symbol, if defined, indicates to the C program that the length
+ *	of directory entry names is provided by a d_namlen field.  Otherwise
+ *	you need to do strlen() on the d_name field.
+ */
+/* Direntry_t:
+ *	This symbol is set to 'struct direct' or 'struct dirent' depending on
+ *	whether dirent is available or not. You should use this pseudo type to
+ *	portably declare your directory entries.
+ */
+#define I_DIRENT		/**/
+/*#define DIRNAMLEN	/**/
+#define Direntry_t struct dirent
+
+/* I_DLFCN:
+ *	This symbol, if defined, indicates that <dlfcn.h> exists and should
+ *	be included.
+ */
+/*#define I_DLFCN		/**/
+
+/* I_FCNTL:
+ *	This manifest constant tells the C program to include <fcntl.h>.
+ */
+#define I_FCNTL	/**/
+
+/* I_FLOAT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <float.h> to get definition of symbols like DBL_MAX or
+ *	DBL_MIN, i.e. machine dependent floating point values.
+ */
+#define I_FLOAT		/**/
+
+/* I_LIMITS:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <limits.h> to get definition of symbols like WORD_BIT or
+ *	LONG_MAX, i.e. machine dependant limitations.
+ */
+#define I_LIMITS		/**/
+
+/* I_LOCALE:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <locale.h>.
+ */
+#define	I_LOCALE		/**/
+
+/* I_MATH:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <math.h>.
+ */
+#define I_MATH		/**/
+
+/* I_MEMORY:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <memory.h>.
+ */
+/*#define I_MEMORY		/**/
+
+/* I_NDBM:
+ *	This symbol, if defined, indicates that <ndbm.h> exists and should
+ *	be included.
+ */
+/*#define I_NDBM	/**/
+
+/* I_NET_ERRNO:
+ *	This symbol, if defined, indicates that <net/errno.h> exists and 
+ *	should be included.
+ */
+/*#define I_NET_ERRNO		/**/
+
+/* I_NETINET_IN:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
+ */
+#define I_NETINET_IN	/**/
+
+/* I_SFIO:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sfio.h>.
+ */
+/*#define	I_SFIO		/**/
+
+/* I_STDDEF:
+ *	This symbol, if defined, indicates that <stddef.h> exists and should
+ *	be included.
+ */
+#define I_STDDEF	/**/
+
+/* I_STDLIB:
+ *	This symbol, if defined, indicates that <stdlib.h> exists and should
+ *	be included.
+ */
+#define I_STDLIB		/**/
+
+/* I_STRING:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <string.h> (USG systems) instead of <strings.h> (BSD systems).
+ */
+#define I_STRING		/**/
+
+/* I_SYS_DIR:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/dir.h>.
+ */
+/*#define I_SYS_DIR		/**/
+
+/* I_SYS_FILE:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/file.h> to get definition of R_OK and friends.
+ */
+/*#define I_SYS_FILE		/**/
+
+/* I_SYS_IOCTL:
+ *	This symbol, if defined, indicates that <sys/ioctl.h> exists and should
+ *	be included. Otherwise, include <sgtty.h> or <termio.h>.
+ */
+#define	I_SYS_IOCTL		/**/
+
+/* I_SYS_NDIR:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/ndir.h>.
+ */
+/*#define I_SYS_NDIR	/**/
+
+/* I_SYS_PARAM:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/param.h>.
+ */
+/*#define I_SYS_PARAM		/**/
+
+/* I_SYS_RESOURCE:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/resource.h>.
+ */
+/*#define I_SYS_RESOURCE		/**/
+
+/* I_SYS_SELECT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/select.h> in order to get definition of struct timeval.
+ */
+#define I_SYS_SELECT	/**/
+
+/* I_SYS_STAT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/stat.h>.
+ */
+#define	I_SYS_STAT		/**/
+
+/* I_SYS_TIMES:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/times.h>.
+ */
+#define	I_SYS_TIMES		/**/
+
+/* I_SYS_TYPES:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/types.h>.
+ */
+#define	I_SYS_TYPES		/**/
+
+/* I_SYS_UN:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/un.h> to get UNIX domain socket definitions.
+ */
+/*#define I_SYS_UN		/**/
+
+/* I_SYS_WAIT:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/wait.h>.
+ */
+#define I_SYS_WAIT	/**/
+
+/* I_TERMIO:
+ *	This symbol, if defined, indicates that the program should include
+ *	<termio.h> rather than <sgtty.h>.  There are also differences in
+ *	the ioctl() calls that depend on the value of this symbol.
+ */
+/* I_TERMIOS:
+ *	This symbol, if defined, indicates that the program should include
+ *	the POSIX termios.h rather than sgtty.h or termio.h.
+ *	There are also differences in the ioctl() calls that depend on the
+ *	value of this symbol.
+ */
+/* I_SGTTY:
+ *	This symbol, if defined, indicates that the program should include
+ *	<sgtty.h> rather than <termio.h>.  There are also differences in
+ *	the ioctl() calls that depend on the value of this symbol.
+ */
+/*#define I_TERMIO		/**/
+#define I_TERMIOS		/**/
+/*#define I_SGTTY		/**/
+
+/* I_UNISTD:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <unistd.h>.
+ */
+#define I_UNISTD		/**/
+
+/* I_UTIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <utime.h>.
+ */
+#define I_UTIME		/**/
+
+/* I_VALUES:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <values.h> to get definition of symbols like MINFLOAT or
+ *	MAXLONG, i.e. machine dependant limitations.  Probably, you
+ *	should use <limits.h> instead, if it is available.
+ */
+#define I_VALUES		/**/
+
+/* I_STDARG:
+ *	This symbol, if defined, indicates that <stdarg.h> exists and should
+ *	be included.
+ */
+/* I_VARARGS:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <varargs.h>.
+ */
+#define I_STDARG		/**/
+/*#define I_VARARGS	/**/
+
+/* I_VFORK:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include vfork.h.
+ */
+/*#define I_VFORK	/**/
+
+/* CAN_PROTOTYPE:
+ *	If defined, this macro indicates that the C compiler can handle
+ *	function prototypes.
+ */
+/* _:
+ *	This macro is used to declare function parameters for folks who want
+ *	to make declarations with prototypes using a different style than
+ *	the above macros.  Use double parentheses.  For example:
+ *
+ *		int main _((int argc, char *argv[]));
+ */
+#define	CAN_PROTOTYPE	/**/
+#ifdef CAN_PROTOTYPE
+#define	_(args) args
+#else
+#define	_(args) ()
+#endif
+
+/* SH_PATH:
+ *	This symbol contains the full pathname to the shell used on this
+ *	on this system to execute Bourne shell scripts.  Usually, this will be
+ *	/bin/sh, though it's possible that some systems will have /bin/ksh,
+ *	/bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ *	D:/bin/sh.exe.
+ */
+#define SH_PATH "/system/ported/command_library/bash.pm"  /**/
+
+/* STDCHAR:
+ *	This symbol is defined to be the type of char used in stdio.h.
+ *	It has the values "unsigned char" or "char".
+ */
+#define STDCHAR unsigned char	/**/
+
+/* CROSSCOMPILE:
+ *	This symbol, if defined, signifies that we our
+ *	build process is a cross-compilation.
+ */
+/*#define CROSSCOMPILE		/**/
+
+/* INTSIZE:
+ *	This symbol contains the value of sizeof(int) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ *	This symbol contains the value of sizeof(long) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ *	This symbol contains the value of sizeof(short) so that the C
+ *	preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4		/**/
+#define LONGSIZE 4		/**/
+#define SHORTSIZE 2		/**/
+
+/* MULTIARCH:
+ *	This symbol, if defined, signifies that the build
+ *	process will produce some binary files that are going to be
+ *	used in a cross-platform environment.  This is the case for
+ *	example with the NeXT "fat" binaries that contain executables
+ *	for several CPUs.
+ */
+/*#define MULTIARCH		/**/
+
+/* HAS_QUAD:
+ *	This symbol, if defined, tells that there's a 64-bit integer type,
+ *	Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ *	of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
+ */
+/*#define HAS_QUAD	/**/
+#ifdef HAS_QUAD
+#   define Quad_t _error_	/**/
+#   define Uquad_t _error_	/**/
+#   define QUADKIND _error_	/**/
+#   define QUAD_IS_INT	1
+#   define QUAD_IS_LONG	2
+#   define QUAD_IS_LONG_LONG	3
+#   define QUAD_IS_INT64_T	4
+#endif
+
+/* HAS_ACCESSX:
+ *	This symbol, if defined, indicates that the accessx routine is
+ *	available to do extended access checks.
+ */
+/*#define HAS_ACCESSX		/**/
+
+/* HAS_EACCESS:
+ *	This symbol, if defined, indicates that the eaccess routine is
+ *	available to do extended access checks.
+ */
+/*#define HAS_EACCESS		/**/
+
+/* I_SYS_ACCESS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <sys/access.h>.
+ */
+/*#define   I_SYS_ACCESS                /**/
+
+/* I_SYS_SECURITY:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <sys/security.h>.
+ */
+/*#define   I_SYS_SECURITY	/**/
+
+/* OSNAME:
+ *	This symbol contains the name of the operating system, as determined
+ *	by Configure.  You shouldn't rely on it too much; the specific
+ *	feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "VOS"		/**/
+
+/* MEM_ALIGNBYTES:
+ *	This symbol contains the number of bytes required to align a
+ *	double, or a long double when applicable. Usual values are 2,
+ *	4 and 8. The default is eight, for safety.
+ */
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+#  define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES 8
+#endif
+
+/* ARCHLIB:
+ *	This variable, if defined, holds the name of the directory in
+ *	which the user wants to put architecture-dependent public
+ *	library files for perl5.  It is most often a local directory
+ *	such as /usr/local/lib.  Programs using this variable must be
+ *	prepared to deal with filename expansion.  If ARCHLIB is the
+ *	same as PRIVLIB, it is not defined, since presumably the
+ *	program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ *	This symbol contains the ~name expanded version of ARCHLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define ARCHLIB ""		/**/
+/*#define ARCHLIB_EXP ""		/**/
+
+/* ARCHNAME:
+ *	This symbol holds a string representing the architecture name.
+ *	It may be used to construct an architecture-dependant pathname
+ *	where library files may be held under a private library, for
+ *	instance.
+ */
+#define ARCHNAME "vos"		/**/
+
+/* HAS_ATOLF:
+ *	This symbol, if defined, indicates that the atolf routine is
+ *	available to convert strings into long doubles.
+ */
+/*#define HAS_ATOLF		/**/
+
+/* HAS_ATOLL:
+ *	This symbol, if defined, indicates that the atoll routine is
+ *	available to convert strings into long longs.
+ */
+/*#define HAS_ATOLL		/**/
+
+/* BIN:
+ *	This symbol holds the path of the bin directory where the package will
+ *	be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ *	This symbol is the filename expanded version of the BIN symbol, for
+ *	programs that do not want to deal with that at run-time.
+ */
+#define BIN "/system/ported/command_library"	/**/
+#define BIN_EXP "/system/ported/command_library"	/**/
+
+/* PERL_BINCOMPAT_5005:
+ *	This symbol, if defined, indicates that this version of Perl should be
+ *	binary-compatible with Perl 5.005.  This is impossible for builds
+ *	that use features like threads and multiplicity it is always $undef
+ *	for those versions.
+ */
+/*#define PERL_BINCOMPAT_5005			/**/
+
+/* BYTEORDER:
+ *	This symbol holds the hexadecimal constant defined in byteorder,
+ *	i.e. 0x1234 or 0x4321, etc...
+ *	If the compiler supports cross-compiling or multiple-architecture
+ *	binaries (eg. on NeXT systems), use compiler-defined macros to
+ *	determine the byte order.
+ *	On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
+ *	Binaries (MAB) on either big endian or little endian machines.
+ *	The endian-ness is available at compile-time.  This only matters
+ *	for perl, where the config.h can be generated and installed on 
+ *	one system, and used by a different architecture to build an
+ *	extension.  Older versions of NeXT that might not have
+ *	defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ *	so the default case (for NeXT) is big endian to catch them. 
+ *	This might matter for NeXT 3.0.
+ */
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+#  ifdef __LITTLE_ENDIAN__
+#    if LONGSIZE == 4
+#      define BYTEORDER 0x1234
+#    else
+#      if LONGSIZE == 8
+#        define BYTEORDER 0x12345678
+#      endif
+#    endif
+#  else
+#    ifdef __BIG_ENDIAN__
+#      if LONGSIZE == 4
+#        define BYTEORDER 0x4321
+#      else
+#        if LONGSIZE == 8
+#          define BYTEORDER 0x87654321
+#        endif
+#      endif
+#    endif
+#  endif
+#  if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+#    define BYTEORDER 0x4321
+#  endif
+#else
+#define BYTEORDER 0x4321	/* large digits for MSB */
+#endif /* NeXT */
+
+/* CAT2:
+ *	This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ *	This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b)	a/**/b
+#define STRINGIFY(a)	"a"
+		/* If you can get stringification with catify, tell me how! */
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b)	a ## b	
+#define PeRl_StGiFy(a)	#a
+/* the additional level of indirection enables these macros to be
+ * used as arguments to other macros.  See K&R 2nd ed., page 231. */
+#define CAT2(a,b)	PeRl_CaTiFy(a,b)
+#define StGiFy(a)	PeRl_StGiFy(a)
+#define STRINGIFY(a)	PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+#   include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ *	This symbol contains the first part of the string which will invoke
+ *	the C preprocessor on the standard input and produce to standard
+ *	output.	 Typical value of "cc -E" or "/lib/cpp", but it can also
+ *	call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ *	This symbol contains the second part of the string which will invoke
+ *	the C preprocessor on the standard input and produce to standard
+ *	output.  This symbol will have the value "-" if CPPSTDIN needs a minus
+ *	to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ *	This symbol contains the string which will invoke a C preprocessor on
+ *	the standard input and produce to standard output. It needs to end
+ *	with CPPLAST, after all other preprocessor flags have been specified.
+ *	The main difference with CPPSTDIN is that this program will never be a
+ *	pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ *	available directly to the user. Note that it may well be different from
+ *	the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ *	This symbol is intended to be used along with CPPRUN in the same manner
+ *	symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E -"
+#define CPPLAST "-"
+
+/* HAS_ACCESS:
+ *	This manifest constant lets the C program know that the access()
+ *	system call is available to check for accessibility using real UID/GID.
+ *	(always present on UNIX.)
+ */
+#define HAS_ACCESS		/**/
+
+/* CASTI32:
+ *	This symbol is defined if the C compiler can cast negative
+ *	or large floating point numbers to 32-bit ints.
+ */
+/*#define	CASTI32		/**/
+
+/* CASTNEGFLOAT:
+ *	This symbol is defined if the C compiler can cast negative
+ *	numbers to unsigned longs, ints and shorts.
+ */
+/* CASTFLAGS:
+ *	This symbol contains flags that say what difficulties the compiler
+ *	has casting odd floating values to unsigned long:
+ *		0 = ok
+ *		1 = couldn't cast < 0
+ *		2 = couldn't cast >= 0x80000000
+ *		4 = couldn't cast in argument expression list
+ */
+#define	CASTNEGFLOAT		/**/
+#define CASTFLAGS 0		/**/
+
+/* VOID_CLOSEDIR:
+ *	This symbol, if defined, indicates that the closedir() routine
+ *	does not return a value.
+ */
+/*#define VOID_CLOSEDIR		/**/
+
+/* HAS_CSH:
+ *	This symbol, if defined, indicates that the C-shell exists.
+ */
+/* CSH:
+ *	This symbol, if defined, contains the full pathname of csh.
+ */
+#define HAS_CSH		/**/
+#ifdef HAS_CSH
+#define CSH "/system/ported/command_library/bash.pm"	/**/
+#endif
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ *	This symbol, if defined, indicates that we need to prepend an
+ *	underscore to the symbol name before calling dlsym().  This only
+ *	makes sense if you *have* dlsym, which we will presume is the
+ *	case if you're using dl_dlopen.xs.
+ */
+/*#define 	DLSYM_NEEDS_UNDERSCORE 	/**/
+
+/* HAS_DRAND48_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the drand48() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern double drand48 _((void));
+ */
+/*#define	HAS_DRAND48_PROTO	/**/
+
+/* HAS_ENDGRENT:
+ *	This symbol, if defined, indicates that the getgrent routine is
+ *	available for finalizing sequential access of the group database.
+ */
+/*#define HAS_ENDGRENT		/**/
+
+/* HAS_ENDHOSTENT:
+ *	This symbol, if defined, indicates that the endhostent() routine is
+ *	available to close whatever was being used for host queries.
+ */
+#define HAS_ENDHOSTENT		/**/
+
+/* HAS_ENDNETENT:
+ *	This symbol, if defined, indicates that the endnetent() routine is
+ *	available to close whatever was being used for network queries.
+ */
+#define HAS_ENDNETENT		/**/
+
+/* HAS_ENDPROTOENT:
+ *	This symbol, if defined, indicates that the endprotoent() routine is
+ *	available to close whatever was being used for protocol queries.
+ */
+#define HAS_ENDPROTOENT		/**/
+
+/* HAS_ENDPWENT:
+ *	This symbol, if defined, indicates that the getgrent routine is
+ *	available for finalizing sequential access of the passwd database.
+ */
+/*#define HAS_ENDPWENT		/**/
+
+/* HAS_ENDSERVENT:
+ *	This symbol, if defined, indicates that the endservent() routine is
+ *	available to close whatever was being used for service queries.
+ */
+#define HAS_ENDSERVENT		/**/
+
+/* HAS_FD_SET:
+ *	This symbol, when defined, indicates presence of the fd_set typedef
+ *	in <sys/types.h>
+ */
+/*#define HAS_FD_SET	/**/
+
+/* FLEXFILENAMES:
+ *	This symbol, if defined, indicates that the system supports filenames
+ *	longer than 14 characters.
+ */
+#define	FLEXFILENAMES		/**/
+
+/* HAS_FPOS64_T:
+ *	This symbol will be defined if the C compiler supports fpos64_t.
+ */
+/*#define	HAS_FPOS64_T    	/**/
+
+/* HAS_FREXPL:
+ *	This symbol, if defined, indicates that the frexpl routine is
+ *	available to break a long double floating-point number into
+ *	a normalized fraction and an integral power of 2.
+ */
+/*#define HAS_FREXPL		/**/
+
+/* HAS_STRUCT_FS_DATA:
+ *	This symbol, if defined, indicates that the struct fs_data
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_FS_DATA	/**/
+
+/* HAS_FSEEKO:
+ *	This symbol, if defined, indicates that the fseeko routine is
+ *	available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO		/**/
+
+/* HAS_FSTATFS:
+ *	This symbol, if defined, indicates that the fstatfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATFS		/**/
+
+/* HAS_FTELLO:
+ *	This symbol, if defined, indicates that the ftello routine is
+ *	available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO		/**/
+
+/* Gconvert:
+ *	This preprocessor macro is defined to convert a floating point
+ *	number to a string without a trailing decimal point.  This
+ *	emulates the behavior of sprintf("%g"), but is sometimes much more
+ *	efficient.  If gconvert() is not available, but gcvt() drops the
+ *	trailing decimal point, then gcvt() is used.  If all else fails,
+ *	a macro using sprintf("%g") is used. Arguments for the Gconvert
+ *	macro are: value, number of digits, whether trailing zeros should
+ *	be retained, and the output buffer.
+ *	Possible values are:
+ *		d_Gconvert='gconvert((x),(n),(t),(b))'
+ *		d_Gconvert='gcvt((x),(n),(b))'
+ *		d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ *	The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+
+/* HAS_GETCWD:
+ *	This symbol, if defined, indicates that the getcwd routine is
+ *	available to get the current working directory.
+ */
+#define HAS_GETCWD		/**/
+
+/* HAS_GETESPWNAM:
+ *	This symbol, if defined, indicates that the getespwnam system call is
+ *	available to retrieve enchanced (shadow) password entries by name.
+ */
+/*#define HAS_GETESPWNAM		/**/
+
+/* HAS_GETFSSTAT:
+ *	This symbol, if defined, indicates that the getfsstat routine is
+ *	available to stat filesystems in bulk.
+ */
+/*#define HAS_GETFSSTAT		/**/
+
+/* HAS_GETGRENT:
+ *	This symbol, if defined, indicates that the getgrent routine is
+ *	available for sequential access of the group database.
+ */
+/*#define HAS_GETGRENT		/**/
+
+/* HAS_GETHOSTBYADDR:
+ *	This symbol, if defined, indicates that the gethostbyaddr() routine is
+ *	available to look up hosts by their IP addresses.
+ */
+#define HAS_GETHOSTBYADDR		/**/
+
+/* HAS_GETHOSTBYNAME:
+ *	This symbol, if defined, indicates that the gethostbyname() routine is
+ *	available to look up host names in some data base or other.
+ */
+#define HAS_GETHOSTBYNAME		/**/
+
+/* HAS_GETHOSTENT:
+ *	This symbol, if defined, indicates that the gethostent() routine is
+ *	available to look up host names in some data base or another.
+ */
+#define HAS_GETHOSTENT		/**/
+
+/* HAS_GETHOSTNAME:
+ *	This symbol, if defined, indicates that the C program may use the
+ *	gethostname() routine to derive the host name.  See also HAS_UNAME
+ *	and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ *	This symbol, if defined, indicates that the C program may use the
+ *	uname() routine to derive the host name.  See also HAS_GETHOSTNAME
+ *	and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ *	This symbol, if defined, indicates the command to feed to the
+ *	popen() routine to derive the host name.  See also HAS_GETHOSTNAME
+ *	and HAS_UNAME.	Note that the command uses a fully qualified path,
+ *	so that it is safe even if used by a process with super-user
+ *	privileges.
+ */
+/* HAS_PHOSTNAME:
+ *	This symbol, if defined, indicates that the C program may use the
+ *	contents of PHOSTNAME as a command to feed to the popen() routine
+ *	to derive the host name.
+ */
+#define HAS_GETHOSTNAME	/**/
+#define HAS_UNAME		/**/
+/*#define HAS_PHOSTNAME	/**/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME ""	/* How to get the host name */
+#endif
+
+/* HAS_GETHOST_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for gethostent(), gethostbyname(), and
+ *	gethostbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETHOST_PROTOS	/**/
+
+/* HAS_GETMNT:
+ *	This symbol, if defined, indicates that the getmnt routine is
+ *	available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT		/**/
+
+/* HAS_GETMNTENT:
+ *	This symbol, if defined, indicates that the getmntent routine is
+ *	available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT		/**/
+
+/* HAS_GETNETBYADDR:
+ *	This symbol, if defined, indicates that the getnetbyaddr() routine is
+ *	available to look up networks by their IP addresses.
+ */
+#define HAS_GETNETBYADDR		/**/
+
+/* HAS_GETNETBYNAME:
+ *	This symbol, if defined, indicates that the getnetbyname() routine is
+ *	available to look up networks by their names.
+ */
+#define HAS_GETNETBYNAME		/**/
+
+/* HAS_GETNETENT:
+ *	This symbol, if defined, indicates that the getnetent() routine is
+ *	available to look up network names in some data base or another.
+ */
+#define HAS_GETNETENT		/**/
+
+/* HAS_GETNET_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getnetent(), getnetbyname(), and
+ *	getnetbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETNET_PROTOS	/**/
+
+/* HAS_GETPAGESIZE:
+ *	This symbol, if defined, indicates that the getpagesize system call
+ *	is available to get system page size, which is the granularity of
+ *	many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE		/**/
+
+/* HAS_GETPROTOENT:
+ *	This symbol, if defined, indicates that the getprotoent() routine is
+ *	available to look up protocols in some data base or another.
+ */
+#define HAS_GETPROTOENT		/**/
+
+/* HAS_GETPROTOBYNAME:
+ *	This symbol, if defined, indicates that the getprotobyname()
+ *	routine is available to look up protocols by their name.
+ */
+/* HAS_GETPROTOBYNUMBER:
+ *	This symbol, if defined, indicates that the getprotobynumber()
+ *	routine is available to look up protocols by their number.
+ */
+#define HAS_GETPROTOBYNAME		/**/
+#define HAS_GETPROTOBYNUMBER		/**/
+
+/* HAS_GETPROTO_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getprotoent(), getprotobyname(), and
+ *	getprotobyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETPROTO_PROTOS	/**/
+
+/* HAS_GETPRPWNAM:
+ *	This symbol, if defined, indicates that the getprpwnam system call is
+ *	available to retrieve protected (shadow) password entries by name.
+ */
+/*#define HAS_GETPRPWNAM		/**/
+
+/* HAS_GETPWENT:
+ *	This symbol, if defined, indicates that the getpwent routine is
+ *	available for sequential access of the passwd database.
+ *	If this is not available, the older getpw() function may be available.
+ */
+/*#define HAS_GETPWENT		/**/
+
+/* HAS_GETSERVENT:
+ *	This symbol, if defined, indicates that the getservent() routine is
+ *	available to look up network services in some data base or another.
+ */
+#define HAS_GETSERVENT		/**/
+
+/* HAS_GETSERV_PROTOS:
+ *	This symbol, if defined, indicates that <netdb.h> includes
+ *	prototypes for getservent(), getservbyname(), and
+ *	getservbyaddr().  Otherwise, it is up to the program to guess
+ *	them.  See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define	HAS_GETSERV_PROTOS	/**/
+
+/* HAS_GETSPNAM:
+ *	This symbol, if defined, indicates that the getspnam system call is
+ *	available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM		/**/
+
+/* HAS_GETSERVBYNAME:
+ *	This symbol, if defined, indicates that the getservbyname()
+ *	routine is available to look up services by their name.
+ */
+/* HAS_GETSERVBYPORT:
+ *	This symbol, if defined, indicates that the getservbyport()
+ *	routine is available to look up services by their port.
+ */
+#define HAS_GETSERVBYNAME		/**/
+#define HAS_GETSERVBYPORT		/**/
+
+/* HAS_GNULIBC:
+ *	This symbol, if defined, indicates to the C program that 
+ *	the GNU C library is being used.
+ */
+/*#define HAS_GNULIBC  	/**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+#   define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ *	This symbol, if defined, indicates that the hasmntopt routine is
+ *	available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT		/**/
+
+/* HAS_HTONL:
+ *	This symbol, if defined, indicates that the htonl() routine (and
+ *	friends htons() ntohl() ntohs()) are available to do network
+ *	order byte swapping.
+ */
+/* HAS_HTONS:
+ *	This symbol, if defined, indicates that the htons() routine (and
+ *	friends htonl() ntohl() ntohs()) are available to do network
+ *	order byte swapping.
+ */
+/* HAS_NTOHL:
+ *	This symbol, if defined, indicates that the ntohl() routine (and
+ *	friends htonl() htons() ntohs()) are available to do network
+ *	order byte swapping.
+ */
+/* HAS_NTOHS:
+ *	This symbol, if defined, indicates that the ntohs() routine (and
+ *	friends htonl() htons() ntohl()) are available to do network
+ *	order byte swapping.
+ */
+#define HAS_HTONL		/**/
+#define HAS_HTONS		/**/
+#define HAS_NTOHL		/**/
+#define HAS_NTOHS		/**/
+
+/* HAS_ICONV:
+ *	This symbol, if defined, indicates that the iconv routine is
+ *	available to do character set conversions.
+ */
+/*#define HAS_ICONV		/**/
+
+/* HAS_INT64_T:
+ *     This symbol will defined if the C compiler supports int64_t.
+ *     Usually the <inttypes.h> needs to be included, but sometimes
+ *	<sys/types.h> is enough.
+ */
+/*#define     HAS_INT64_T               /**/
+
+/* HAS_ISASCII:
+ *	This manifest constant lets the C program know that isascii 
+ *	is available.
+ */
+#define HAS_ISASCII		/**/
+
+/* HAS_ISNAN:
+ *	This symbol, if defined, indicates that the isnan routine is
+ *	available to check whether a double is a NaN.
+ */
+/*#define HAS_ISNAN		/**/
+
+/* HAS_ISNANL:
+ *	This symbol, if defined, indicates that the isnanl routine is
+ *	available to check whether a long double is a NaN.
+ */
+/*#define HAS_ISNANL		/**/
+
+/* HAS_LCHOWN:
+ *	This symbol, if defined, indicates that the lchown routine is
+ *	available to operate on a symbolic link (instead of following the
+ *	link).
+ */
+/*#define HAS_LCHOWN		/**/
+
+/* HAS_LDBL_DIG:
+ *	This symbol, if defined, indicates that this system's <float.h>
+ *	or <limits.h> defines the symbol LDBL_DIG, which is the number
+ *	of significant digits in a long double precision number. Unlike
+ *	for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG 	/* */
+
+/* HAS_LONG_DOUBLE:
+ *	This symbol will be defined if the C compiler supports long
+ *	doubles.
+ */
+/* LONG_DOUBLESIZE:
+ *	This symbol contains the size of a long double, so that the 
+ *	C preprocessor can make decisions based on it.  It is only
+ *	defined if the system supports long doubles.
+ */
+#define HAS_LONG_DOUBLE		/**/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE 8		/**/
+#endif
+
+/* HAS_LONG_LONG:
+ *	This symbol will be defined if the C compiler supports long long.
+ */
+/* LONGLONGSIZE:
+ *	This symbol contains the size of a long long, so that the 
+ *	C preprocessor can make decisions based on it.  It is only
+ *	defined if the system supports long long.
+ */
+/*#define HAS_LONG_LONG		/**/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE _error_		/**/
+#endif
+
+/* HAS_LSEEK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the lseek() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern off_t lseek(int, off_t, int);
+ */
+#define	HAS_LSEEK_PROTO	/**/
+
+/* HAS_MADVISE:
+ *	This symbol, if defined, indicates that the madvise system call is
+ *	available to map a file into memory.
+ */
+/*#define HAS_MADVISE		/**/
+
+/* HAS_MEMCHR:
+ *	This symbol, if defined, indicates that the memchr routine is available
+ *	to locate characters within a C string.
+ */
+#define HAS_MEMCHR	/**/
+
+/* HAS_MKDTEMP:
+ *	This symbol, if defined, indicates that the mkdtemp routine is
+ *	available to exclusively create a uniquely named temporary directory.
+ */
+/*#define HAS_MKDTEMP		/**/
+
+/* HAS_MKSTEMP:
+ *	This symbol, if defined, indicates that the mkstemp routine is
+ *	available to exclusively create and open a uniquely named
+ *	temporary file.
+ */
+/*#define HAS_MKSTEMP		/**/
+
+/* HAS_MKSTEMPS:
+ *	This symbol, if defined, indicates that the mkstemps routine is
+ *	available to excluslvely create and open a uniquely named
+ *	(with a suffix) temporary file.
+ */
+/*#define HAS_MKSTEMPS		/**/
+
+/* HAS_MMAP:
+ *	This symbol, if defined, indicates that the mmap system call is
+ *	available to map a file into memory.
+ */
+/* Mmap_t:
+ *	This symbol holds the return type of the mmap() system call
+ *	(and simultaneously the type of the first argument).
+ *	Usually set to 'void *' or 'cadd_t'.
+ */
+#define HAS_MMAP		/**/
+#define Mmap_t void *	/**/
+
+/* HAS_MODFL:
+ *	This symbol, if defined, indicates that the modfl routine is
+ *	available to split a long double x into a fractional part f and
+ *	an integer part i such that |f| < 1.0 and (f + i) = x.
+ */
+/*#define HAS_MODFL		/**/
+
+/* HAS_MPROTECT:
+ *	This symbol, if defined, indicates that the mprotect system call is
+ *	available to modify the access protection of a memory mapped file.
+ */
+/*#define HAS_MPROTECT		/**/
+
+/* HAS_MSG:
+ *	This symbol, if defined, indicates that the entire msg*(2) library is
+ *	supported (IPC mechanism based on message queues).
+ */
+/*#define HAS_MSG		/**/
+
+/* HAS_OFF64_T:
+ *	This symbol will be defined if the C compiler supports off64_t.
+ */
+/*#define	HAS_OFF64_T    		/**/
+
+/* HAS_OPEN3:
+ *	This manifest constant lets the C program know that the three
+ *	argument form of open(2) is available.
+ */
+#define HAS_OPEN3		/**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ *	This symbol, if defined, indicates how to create pthread
+ *	in joinable (aka undetached) state.  NOTE: not defined
+ *	if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ *	(the new version of the constant).
+ *	If defined, known values are PTHREAD_CREATE_UNDETACHED
+ *	and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE  /**/
+
+/* HAS_PTHREAD_YIELD:
+ *	This symbol, if defined, indicates that the pthread_yield 
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ *	This symbol defines the way to yield the execution of
+ *	the current thread.  Known ways are sched_yield,
+ *	pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ *	This symbol, if defined, indicates that the sched_yield
+ *	routine is available to yield the execution of the current
+ *	thread.	 sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD	/**/
+#define SCHED_YIELD		/**/
+/*#define HAS_SCHED_YIELD	/**/
+
+/* HAS_SAFE_BCOPY:
+ *	This symbol, if defined, indicates that the bcopy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+/*#define HAS_SAFE_BCOPY	/**/
+
+/* HAS_SAFE_MEMCPY:
+ *	This symbol, if defined, indicates that the memcpy routine is available
+ *	to copy potentially overlapping memory blocks. Otherwise you should
+ *	probably use memmove() or memcpy(). If neither is defined, roll your
+ *	own version.
+ */
+/*#define HAS_SAFE_MEMCPY	/**/
+
+/* HAS_SANE_MEMCMP:
+ *	This symbol, if defined, indicates that the memcmp routine is available
+ *	and can be used to compare relative magnitudes of chars with their high
+ *	bits set.  If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP	/**/
+
+/* HAS_SEM:
+ *	This symbol, if defined, indicates that the entire sem*(2) library is
+ *	supported.
+ */
+/*#define HAS_SEM		/**/
+
+/* HAS_SETGRENT:
+ *	This symbol, if defined, indicates that the setgrent routine is
+ *	available for initializing sequential access of the group database.
+ */
+/*#define HAS_SETGRENT		/**/
+
+/* HAS_SETGROUPS:
+ *	This symbol, if defined, indicates that the setgroups() routine is
+ *	available to set the list of process groups.  If unavailable, multiple
+ *	groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS		/**/
+
+/* HAS_SETHOSTENT:
+ *	This symbol, if defined, indicates that the sethostent() routine is
+ *	available.
+ */
+#define HAS_SETHOSTENT		/**/
+
+/* HAS_SETNETENT:
+ *	This symbol, if defined, indicates that the setnetent() routine is
+ *	available.
+ */
+#define HAS_SETNETENT		/**/
+
+/* HAS_SETPROTOENT:
+ *	This symbol, if defined, indicates that the setprotoent() routine is
+ *	available.
+ */
+#define HAS_SETPROTOENT		/**/
+
+/* HAS_SETPROCTITLE:
+ *	This symbol, if defined, indicates that the setproctitle routine is
+ *	available to set process title.
+ */
+/*#define HAS_SETPROCTITLE		/**/
+
+/* HAS_SETPWENT:
+ *	This symbol, if defined, indicates that the setpwent routine is
+ *	available for initializing sequential access of the passwd database.
+ */
+/*#define HAS_SETPWENT		/**/
+
+/* HAS_SETSERVENT:
+ *	This symbol, if defined, indicates that the setservent() routine is
+ *	available.
+ */
+#define HAS_SETSERVENT		/**/
+
+/* HAS_SETVBUF:
+ *	This symbol, if defined, indicates that the setvbuf routine is
+ *	available to change buffering on an open stdio stream.
+ *	to a line-buffered mode.
+ */
+#define HAS_SETVBUF		/**/
+
+/* USE_SFIO:
+ *	This symbol, if defined, indicates that sfio should
+ *	be used.
+ */
+/*#define	USE_SFIO		/**/
+
+/* HAS_SHM:
+ *	This symbol, if defined, indicates that the entire shm*(2) library is
+ *	supported.
+ */
+/*#define HAS_SHM		/**/
+
+/* HAS_SIGACTION:
+ *	This symbol, if defined, indicates that Vr4's sigaction() routine
+ *	is available.
+ */
+#define HAS_SIGACTION	/**/
+
+/* HAS_SIGSETJMP:
+ *	This variable indicates to the C program that the sigsetjmp()
+ *	routine is available to save the calling process's registers
+ *	and stack environment for later use by siglongjmp(), and
+ *	to optionally save the process's signal mask.  See
+ *	Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
+/* Sigjmp_buf:
+ *	This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ *	This macro is used in the same way as sigsetjmp(), but will invoke
+ *	traditional setjmp() if sigsetjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ *	This macro is used in the same way as siglongjmp(), but will invoke
+ *	traditional longjmp() if siglongjmp isn't available.
+ *	See HAS_SIGSETJMP.
+ */
+#define HAS_SIGSETJMP	/**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
+
+/* HAS_SOCKET:
+ *	This symbol, if defined, indicates that the BSD socket interface is
+ *	supported.
+ */
+/* HAS_SOCKETPAIR:
+ *	This symbol, if defined, indicates that the BSD socketpair() call is
+ *	supported.
+ */
+/* HAS_MSG_CTRUNC:
+ *	This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ *	This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ *	This symbol, if defined, indicates that the MSG_OOB is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ *	This symbol, if defined, indicates that the MSG_PEEK is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ *	This symbol, if defined, indicates that the MSG_PROXY is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ *	This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ *	Checking just with #ifdef might not be enough because this symbol
+ *	has been known to be an enum.
+ */
+#define	HAS_SOCKET		/**/
+/*#define	HAS_SOCKETPAIR	/**/
+/*#define	HAS_MSG_CTRUNC	/**/
+/*#define	HAS_MSG_DONTROUTE	/**/
+/*#define	HAS_MSG_OOB	/**/
+/*#define	HAS_MSG_PEEK	/**/
+/*#define	HAS_MSG_PROXY	/**/
+/*#define	HAS_SCM_RIGHTS	/**/
+
+/* HAS_SOCKS5_INIT:
+ *	This symbol, if defined, indicates that the socks5_init routine is
+ *	available to initialize SOCKS 5.
+ */
+/*#define HAS_SOCKS5_INIT		/**/
+
+/* HAS_SQRTL:
+ *	This symbol, if defined, indicates that the sqrtl routine is
+ *	available to do long double square roots.
+ */
+/*#define HAS_SQRTL		/**/
+
+/* USE_STAT_BLOCKS:
+ *	This symbol is defined if this system has a stat structure declaring
+ *	st_blksize and st_blocks.
+ */
+#ifndef USE_STAT_BLOCKS
+/*#define USE_STAT_BLOCKS 	/**/
+#endif
+
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	does have the f_flags member containing the mount flags of
+ *	the filesystem containing the file.
+ *	This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ *	not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
+ *	have statfs() and struct statfs, they have ustat() and getmnt()
+ *	with struct ustat and struct fs_data.
+ */
+/*#define HAS_STRUCT_STATFS_F_FLAGS		/**/
+
+/* HAS_STRUCT_STATFS:
+ *	This symbol, if defined, indicates that the struct statfs
+ *	to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_STATFS	/**/
+
+/* HAS_FSTATVFS:
+ *	This symbol, if defined, indicates that the fstatvfs routine is
+ *	available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATVFS		/**/
+
+/* USE_STDIO_PTR:
+ *	This symbol is defined if the _ptr and _cnt fields (or similar)
+ *	of the stdio FILE structure can be used to access the stdio buffer
+ *	for a file handle.  If this is defined, then the FILE_ptr(fp)
+ *	and FILE_cnt(fp) macros will also be defined and should be used
+ *	to access these fields.
+ */
+/* FILE_ptr:
+ *	This macro is used to access the _ptr field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_PTR_LVALUE:
+ *	This symbol is defined if the FILE_ptr macro can be used as an
+ *	lvalue.
+ */
+/* FILE_cnt:
+ *	This macro is used to access the _cnt field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_PTR is defined.
+ */
+/* STDIO_CNT_LVALUE:
+ *	This symbol is defined if the FILE_cnt macro can be used as an
+ *	lvalue.
+ */
+/* STDIO_PTR_LVAL_SETS_CNT:
+ *	This symbol is defined if using the FILE_ptr macro as an lvalue
+ *	to increase the pointer by n has the side effect of decreasing the
+ *	value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ *	This symbol is defined if using the FILE_ptr macro as an lvalue
+ *	to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR 	/**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp)	((fp)->_ptr)
+#define STDIO_PTR_LVALUE 		/**/
+#define FILE_cnt(fp)	((fp)->_cnt)
+#define STDIO_CNT_LVALUE 		/**/
+/*#define STDIO_PTR_LVAL_SETS_CNT	/**/
+/*#define STDIO_PTR_LVAL_NOCHANGE_CNT	/**/
+#endif
+
+/* USE_STDIO_BASE:
+ *	This symbol is defined if the _base field (or similar) of the
+ *	stdio FILE structure can be used to access the stdio buffer for
+ *	a file handle.  If this is defined, then the FILE_base(fp) macro
+ *	will also be defined and should be used to access this field.
+ *	Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ *	to determine the number of bytes in the buffer.  USE_STDIO_BASE
+ *	will never be defined unless USE_STDIO_PTR is.
+ */
+/* FILE_base:
+ *	This macro is used to access the _base field (or equivalent) of the
+ *	FILE structure pointed to by its argument. This macro will always be
+ *	defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ *	This macro is used to determine the number of bytes in the I/O
+ *	buffer pointed to by _base field (or equivalent) of the FILE
+ *	structure pointed to its argument. This macro will always be defined
+ *	if USE_STDIO_BASE is defined.
+ */
+#define USE_STDIO_BASE 	/**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp)	((fp)->_base)
+#define FILE_bufsiz(fp)	((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
+
+/* HAS_STRERROR:
+ *	This symbol, if defined, indicates that the strerror routine is
+ *	available to translate error numbers to strings. See the writeup
+ *	of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ *	This symbol, if defined, indicates that the sys_errlist array is
+ *	available to translate error numbers to strings. The extern int
+ *	sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ *	This preprocessor symbol is defined as a macro if strerror() is
+ *	not available to translate error numbers to strings but sys_errlist[]
+ *	array is there.
+ */
+#define HAS_STRERROR		/**/
+#define HAS_SYS_ERRLIST	/**/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRTOLD:
+ *	This symbol, if defined, indicates that the strtold routine is
+ *	available to convert strings to long doubles.
+ */
+/*#define HAS_STRTOLD		/**/
+
+/* HAS_STRTOLL:
+ *	This symbol, if defined, indicates that the strtoll routine is
+ *	available to convert strings to long longs.
+ */
+/*#define HAS_STRTOLL		/**/
+
+/* HAS_STRTOULL:
+ *	This symbol, if defined, indicates that the strtoull routine is
+ *	available to convert strings to unsigned long longs.
+ */
+/*#define HAS_STRTOULL		/**/
+
+/* HAS_STRTOUQ:
+ *	This symbol, if defined, indicates that the strtouq routine is
+ *	available to convert strings to unsigned long longs (quads).
+ */
+/*#define HAS_STRTOUQ		/**/
+
+/* HAS_TELLDIR_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the telldir() function.  Otherwise, it is up
+ *	to the program to supply one.  A good guess is
+ *		extern long telldir _((DIR*));
+ */
+/*#define	HAS_TELLDIR_PROTO	/**/
+
+/* Time_t:
+ *	This symbol holds the type returned by time(). It can be long,
+ *	or time_t on BSD sites (in which case <sys/types.h> should be
+ *	included).
+ */
+#define Time_t time_t		/* Time type */
+
+/* HAS_TIMES:
+ *	This symbol, if defined, indicates that the times() routine exists.
+ *	Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES		/**/
+
+/* HAS_UNION_SEMUN:
+ *	This symbol, if defined, indicates that the union semun is
+ *	defined by including <sys/sem.h>.  If not, the user code
+ *	probably needs to define it as:
+ *	union semun {
+ *	    int val;
+ *	    struct semid_ds *buf;
+ *	    unsigned short *array;
+ *	}
+ */
+/* USE_SEMCTL_SEMUN:
+ *	This symbol, if defined, indicates that union semun is
+ *	used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ *	This symbol, if defined, indicates that struct semid_ds * is
+ *	used for semctl IPC_STAT.
+ */
+/*#define HAS_UNION_SEMUN	/**/
+/*#define USE_SEMCTL_SEMUN	/**/
+/*#define USE_SEMCTL_SEMID_DS	/**/
+
+/* HAS_USTAT:
+ *	This symbol, if defined, indicates that the ustat system call is
+ *	available to query file system statistics by dev_t.
+ */
+/*#define HAS_USTAT		/**/
+
+/* HAS_VFORK:
+ *	This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK	/**/
+
+/* Signal_t:
+ *	This symbol's value is either "void" or "int", corresponding to the
+ *	appropriate return type of a signal handler.  Thus, you can declare
+ *	a signal handler using "Signal_t (*handler)()", and define the
+ *	handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void	/* Signal handler's return type */
+
+/* HAS_VPRINTF:
+ *	This symbol, if defined, indicates that the vprintf routine is available
+ *	to printf with a pointer to an argument list.  If unavailable, you
+ *	may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ *	This symbol is defined if this system has vsprintf() returning type
+ *	(char*).  The trend seems to be to declare it as "int vsprintf()".  It
+ *	is up to the package author to declare vsprintf correctly based on the
+ *	symbol.
+ */
+#define HAS_VPRINTF	/**/
+/*#define USE_CHAR_VSPRINTF 	/**/
+
+/* USE_DYNAMIC_LOADING:
+ *	This symbol, if defined, indicates that dynamic loading of
+ *	some sort is available.
+ */
+/*#define USE_DYNAMIC_LOADING		/**/
+
+/* DOUBLESIZE:
+ *	This symbol contains the size of a double, so that the C preprocessor
+ *	can make decisions based on it.
+ */
+#define DOUBLESIZE 8		/**/
+
+/* EBCDIC:
+ *     This symbol, if defined, indicates that this system uses
+ *	EBCDIC encoding.
+ */
+/*#define	EBCDIC 		/**/
+
+/* FFLUSH_NULL:
+ *	This symbol, if defined, tells that fflush(NULL) does flush
+ *	all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ *	This symbol, if defined, tells that to flush
+ *	all pending stdio output one must loop through all
+ *	the stdio file handles stored in an array and fflush them.
+ *	Note that if fflushNULL is defined, fflushall will not
+ *	even be probed for and will be left undefined.
+ */
+#define	FFLUSH_NULL 		/**/
+/*#define	FFLUSH_ALL 		/**/
+
+/* Fpos_t:
+ *	This symbol holds the type used to declare file positions in libc.
+ *	It can be fpos_t, long, uint, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t		/* File position type */
+
+/* Gid_t_f:
+ *	This symbol defines the format string used for printing a Gid_t.
+ */
+#define	Gid_t_f		"d"		/**/
+
+/* Gid_t_sign:
+ *	This symbol holds the signedess of a Gid_t.
+ *	1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign	-1		/* GID sign */
+
+/* Gid_t_size:
+ *	This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4		/* GID size */
+
+/* Gid_t:
+ *	This symbol holds the return type of getgid() and the type of
+ *	argument to setrgid() and related functions.  Typically,
+ *	it is the type of group ids in the kernel. It can be int, ushort,
+ *	gid_t, etc... It may be necessary to include <sys/types.h> to get
+ *	any typedef'ed information.
+ */
+#define Gid_t gid_t		/* Type for getgid(), etc... */
+
+/* Groups_t:
+ *	This symbol holds the type used for the second argument to
+ *	getgroups() and setgroups().  Usually, this is the same as
+ *	gidtype (gid_t) , but sometimes it isn't.
+ *	It can be int, ushort, gid_t, etc... 
+ *	It may be necessary to include <sys/types.h> to get any 
+ *	typedef'ed information.  This is only required if you have
+ *	getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t	/* Type for 2nd arg to [sg]etgroups() */
+#endif
+
+/* DB_Prefix_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ *	This symbol contains the type of the prefix structure element
+ *	in the <db.h> header file.  In older versions of DB, it was
+ *	int, while in newer ones it is size_t.
+ */
+#define DB_Hash_t	int		/**/
+#define DB_Prefix_t	int  	/**/
+
+/* I_GRP:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <grp.h>.
+ */
+/* GRPASSWD:
+ *	This symbol, if defined, indicates to the C program that struct group
+ *	in <grp.h> contains gr_passwd.
+ */
+#define I_GRP		/**/
+/*#define GRPASSWD	/**/
+
+/* I_ICONV:
+ *	This symbol, if defined, indicates that <iconv.h> exists and
+ *	should be included.
+ */
+/*#define	I_ICONV		/**/
+
+/* I_IEEEFP:
+ *	This symbol, if defined, indicates that <ieeefp.h> exists and
+ *	should be included.
+ */
+/*#define	I_IEEEFP		/**/
+
+/* I_INTTYPES:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <inttypes.h>.
+ */
+/*#define   I_INTTYPES                /**/
+
+/* I_LIBUTIL:
+ *	This symbol, if defined, indicates that <libutil.h> exists and
+ *	should be included.
+ */
+/*#define	I_LIBUTIL		/**/
+
+/* I_MACH_CTHREADS:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <mach/cthreads.h>.
+ */
+/*#define   I_MACH_CTHREADS	/**/
+
+/* I_MNTENT:
+ *	This symbol, if defined, indicates that <mntent.h> exists and
+ *	should be included.
+ */
+/*#define	I_MNTENT		/**/
+
+/* I_NETDB:
+ *	This symbol, if defined, indicates that <netdb.h> exists and
+ *	should be included.
+ */
+#define I_NETDB		/**/
+
+/* I_NETINET_TCP:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <netinet/tcp.h>.
+ */
+#define   I_NETINET_TCP                /**/
+
+/* I_POLL:
+ *	This symbol, if defined, indicates that <poll.h> exists and
+ *	should be included.
+ */
+/*#define	I_POLL		/**/
+
+/* I_PROT:
+ *	This symbol, if defined, indicates that <prot.h> exists and
+ *	should be included.
+ */
+/*#define	I_PROT		/**/
+
+/* I_PTHREAD:
+ *     This symbol, if defined, indicates to the C program that it should
+ *     include <pthread.h>.
+ */
+/*#define   I_PTHREAD	/**/
+
+/* I_PWD:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <pwd.h>.
+ */
+/* PWQUOTA:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_quota.
+ */
+/* PWAGE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_age.
+ */
+/* PWCHANGE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_change.
+ */
+/* PWCLASS:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_class.
+ */
+/* PWEXPIRE:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_expire.
+ */
+/* PWCOMMENT:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_comment.
+ */
+/* PWGECOS:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_gecos.
+ */
+/* PWPASSWD:
+ *	This symbol, if defined, indicates to the C program that struct passwd
+ *	contains pw_passwd.
+ */
+#define I_PWD		/**/
+/*#define PWQUOTA	/**/
+/*#define PWAGE	/**/
+/*#define PWCHANGE	/**/
+/*#define PWCLASS	/**/
+/*#define PWEXPIRE	/**/
+/*#define PWCOMMENT	/**/
+/*#define PWGECOS	/**/
+/*#define PWPASSWD	/**/
+
+/* I_SHADOW:
+ *	This symbol, if defined, indicates that <shadow.h> exists and
+ *	should be included.
+ */
+/*#define	I_SHADOW		/**/
+
+/* I_SOCKS:
+ *	This symbol, if defined, indicates that <socks.h> exists and
+ *	should be included.
+ */
+/*#define	I_SOCKS		/**/
+
+/* I_SUNMATH:
+ *	This symbol, if defined, indicates that <sunmath.h> exists and
+ *	should be included.
+ */
+/*#define	I_SUNMATH		/**/
+
+/* I_SYSLOG:
+ *	This symbol, if defined, indicates that <syslog.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYSLOG		/**/
+
+/* I_SYSMODE:
+ *	This symbol, if defined, indicates that <sys/mode.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYSMODE		/**/
+
+/* I_SYS_MOUNT:
+ *	This symbol, if defined, indicates that <sys/mount.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYS_MOUNT		/**/
+
+/* I_SYS_STATFS:
+ *	This symbol, if defined, indicates that <sys/statfs.h> exists.
+ */
+/*#define	I_SYS_STATFS		/**/
+
+/* I_SYS_STATVFS:
+ *	This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYS_STATVFS		/**/
+
+/* I_SYSUIO:
+ *	This symbol, if defined, indicates that <sys/uio.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYSUIO		/**/
+
+/* I_SYSUTSNAME:
+ *	This symbol, if defined, indicates that <sys/utsname.h> exists and
+ *	should be included.
+ */
+#define	I_SYSUTSNAME		/**/
+
+/* I_SYS_VFS:
+ *	This symbol, if defined, indicates that <sys/vfs.h> exists and
+ *	should be included.
+ */
+/*#define	I_SYS_VFS		/**/
+
+/* I_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <time.h>.
+ */
+/* I_SYS_TIME:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ *	This symbol, if defined, indicates to the C program that it should
+ *	include <sys/time.h> with KERNEL defined.
+ */
+/*#define I_TIME		/**/
+#define I_SYS_TIME		/**/
+/*#define I_SYS_TIME_KERNEL		/**/
+
+/* I_USTAT:
+ *	This symbol, if defined, indicates that <ustat.h> exists and
+ *	should be included.
+ */
+/*#define	I_USTAT		/**/
+
+/* PERL_INC_VERSION_LIST:
+ *	This variable specifies the list of subdirectories in over
+ *	which perl.c:incpush() and lib/lib.pm will automatically
+ *	search when adding directories to @INC, in a format suitable
+ *	for a C initialization string.  See the inc_version_list entry
+ *	in Porting/Glossary for more details.
+ */
+#define PERL_INC_VERSION_LIST 0		/**/
+
+/* INSTALL_USR_BIN_PERL:
+ *	This symbol, if defined, indicates that Perl is to be installed
+ * 	also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL	/**/
+
+/* PERL_PRIfldbl:
+ *	This symbol, if defined, contains the string used by stdio to
+ *	format long doubles (format 'f') for output.
+ */
+/* PERL_PRIgldbl:
+ *	This symbol, if defined, contains the string used by stdio to
+ *	format long doubles (format 'g') for output.
+ */
+/* PERL_PRIeldbl:
+ *	This symbol, if defined, contains the string used by stdio to
+ *	format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ *	This symbol, if defined, contains the string used by stdio to
+ *	format long doubles (format 'f') for input.
+ */
+#define PERL_PRIfldbl	"Lf"	/**/
+#define PERL_PRIgldbl	"Lg"	/**/
+#define PERL_PRIeldbl	"Le"	/**/
+#define PERL_SCNfldbl	"Lf"	/**/
+
+/* Off_t:
+ *	This symbol holds the type used to declare offsets in the kernel.
+ *	It can be int, long, off_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ *	This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t off_t		/* <offset> type */
+#define LSEEKSIZE 4		/* <offset> size */
+#define Off_t_size 4	/* <offset> size */
+
+/* Free_t:
+ *	This variable contains the return type of free().  It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ *	This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t void *			/**/
+#define Free_t void			/**/
+
+/* MYMALLOC:
+ *	This symbol, if defined, indicates that we're using our own malloc.
+ */
+/*#define MYMALLOC			/**/
+
+/* Mode_t:
+ *	This symbol holds the type used to declare file modes 
+ *	for systems calls.  It is usually mode_t, but may be
+ *	int or unsigned short.  It may be necessary to include <sys/types.h>
+ *	to get any typedef'ed information.
+ */
+#define Mode_t mode_t	 /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ *	This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ *	non-blocking I/O for the file descriptor. Note that there is no way
+ *	back, i.e. you cannot turn it blocking again this way. If you wish to
+ *	alternatively switch between blocking and non-blocking, use the
+ *	ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ *	This symbol holds the errno error code set by read() when no data was
+ *	present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ *	This symbol holds the return code from read() when no data is present
+ *	on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ *	not defined, then you can't distinguish between no data and EOF by
+ *	issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ *	This symbol, if defined, indicates to the C program that a read() on
+ *	a non-blocking file descriptor will return 0 on EOF, and not the value
+ *	held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* Netdb_host_t:
+ *	This symbol holds the type used for the 1st argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ *	This symbol holds the type used for the 2nd argument
+ *	to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ *	This symbol holds the type used for the argument to
+ *	gethostbyname().
+ */
+/* Netdb_net_t:
+ *	This symbol holds the type used for the 1st argument to
+ *	getnetbyaddr().
+ */
+#define Netdb_host_t		char * /**/
+#define Netdb_hlen_t		int /**/
+#define Netdb_name_t		char * /**/
+#define Netdb_net_t		long /**/
+
+/* PERL_OTHERLIBDIRS:
+ *	This variable contains a colon-separated set of paths for the perl
+ *	binary to search for additional library files or modules.
+ *	These directories will be tacked to the end of @INC.
+ *	Perl will automatically search below each path for version-
+ *	and architecture-specific directories.  See PERL_INC_VERSION_LIST
+ *	for more details.
+ */
+/*#define PERL_OTHERLIBDIRS ""		/**/
+
+/* IVTYPE:
+ *	This symbol defines the C type used for Perl's IV.
+ */
+/* UVTYPE:
+ *	This symbol defines the C type used for Perl's UV.
+ */
+/* I8TYPE:
+ *	This symbol defines the C type used for Perl's I8.
+ */
+/* U8TYPE:
+ *	This symbol defines the C type used for Perl's U8.
+ */
+/* I16TYPE:
+ *	This symbol defines the C type used for Perl's I16.
+ */
+/* U16TYPE:
+ *	This symbol defines the C type used for Perl's U16.
+ */
+/* I32TYPE:
+ *	This symbol defines the C type used for Perl's I32.
+ */
+/* U32TYPE:
+ *	This symbol defines the C type used for Perl's U32.
+ */
+/* I64TYPE:
+ *	This symbol defines the C type used for Perl's I64.
+ */
+/* U64TYPE:
+ *	This symbol defines the C type used for Perl's U64.
+ */
+/* NVTYPE:
+ *	This symbol defines the C type used for Perl's NV.
+ */
+/* IVSIZE:
+ *	This symbol contains the sizeof(IV).
+ */
+/* UVSIZE:
+ *	This symbol contains the sizeof(UV).
+ */
+/* I8SIZE:
+ *	This symbol contains the sizeof(I8).
+ */
+/* U8SIZE:
+ *	This symbol contains the sizeof(U8).
+ */
+/* I16SIZE:
+ *	This symbol contains the sizeof(I16).
+ */
+/* U16SIZE:
+ *	This symbol contains the sizeof(U16).
+ */
+/* I32SIZE:
+ *	This symbol contains the sizeof(I32).
+ */
+/* U32SIZE:
+ *	This symbol contains the sizeof(U32).
+ */
+/* I64SIZE:
+ *	This symbol contains the sizeof(I64).
+ */
+/* U64SIZE:
+ *	This symbol contains the sizeof(U64).
+ */
+/* NVSIZE:
+ *	This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ *	This symbol, if defined, indicates that a variable of type NVTYPE
+ *	can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ *	This symbol contains the number of bits a variable of type NVTYPE
+ *	can preserve of a variable of type UVTYPE.
+ */
+#define	IVTYPE		int		/**/
+#define	UVTYPE		unsigned int		/**/
+#define	I8TYPE		char		/**/
+#define	U8TYPE		unsigned char		/**/
+#define	I16TYPE		short	/**/
+#define	U16TYPE		unsigned short	/**/
+#define	I32TYPE		int	/**/
+#define	U32TYPE		unsigned int	/**/
+#ifdef HAS_QUAD
+#define	I64TYPE		_error_	/**/
+#define	U64TYPE		_error_	/**/
+#endif
+#define	NVTYPE		double		/**/
+#define	IVSIZE		4		/**/
+#define	UVSIZE		4		/**/
+#define	I8SIZE		1		/**/
+#define	U8SIZE		1		/**/
+#define	I16SIZE		2	/**/
+#define	U16SIZE		2	/**/
+#define	I32SIZE		4	/**/
+#define	U32SIZE		4	/**/
+#ifdef HAS_QUAD
+#define	I64SIZE		_error_	/**/
+#define	U64SIZE		_error_	/**/
+#endif
+#define	NVSIZE		8		/**/
+#define	NV_PRESERVES_UV
+#define	NV_PRESERVES_UV_BITS	32
+
+/* IVdf:
+ *	This symbol defines the format string used for printing a Perl IV
+ *	as a signed decimal integer.
+ */
+/* UVuf:
+ *	This symbol defines the format string used for printing a Perl UV
+ *	as an unsigned decimal integer.
+ */
+/* UVof:
+ *	This symbol defines the format string used for printing a Perl UV
+ *	as an unsigned octal integer.
+ */
+/* UVxf:
+ *	This symbol defines the format string used for printing a Perl UV
+ *	as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* NVef:
+ *	This symbol defines the format string used for printing a Perl NV
+ *	using %e-ish floating point format.
+ */
+/* NVff:
+ *	This symbol defines the format string used for printing a Perl NV
+ *	using %f-ish floating point format.
+ */
+/* NVgf:
+ *	This symbol defines the format string used for printing a Perl NV
+ *	using %g-ish floating point format.
+ */
+#define	IVdf		"d"		/**/
+#define	UVuf		"u"		/**/
+#define	UVof		"o"		/**/
+#define	UVxf		"x"		/**/
+#define	NVef		"e"		/**/
+#define	NVff		"f"		/**/
+#define	NVgf		"g"		/**/
+
+/* Pid_t:
+ *	This symbol holds the type used to declare process ids in the kernel.
+ *	It can be int, uint, pid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t pid_t		/* PID type */
+
+/* PRIVLIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ *	This symbol contains the ~name expanded version of PRIVLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "/system/ported/perl/lib/5.6"		/**/
+#define PRIVLIB_EXP "/system/ported/perl/lib/5.6"		/**/
+
+/* PTRSIZE:
+ *	This symbol contains the size of a pointer, so that the C preprocessor
+ *	can make decisions based on it.  It will be sizeof(void *) if
+ *	the compiler supports (void *); otherwise it will be
+ *	sizeof(char *).
+ */
+#define PTRSIZE 4		/**/
+
+/* Drand01:
+ *	This macro is to be used to generate uniformly distributed
+ *	random numbers over the range [0., 1.[.  You may have to supply
+ *	an 'extern double drand48();' in your program since SunOS 4.1.3
+ *	doesn't provide you with anything relevant in it's headers.
+ *	See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ *	This symbol defines the type of the argument of the
+ *	random seed function.
+ */
+/* seedDrand01:
+ *	This symbol defines the macro to be used in seeding the
+ *	random number generator (see Drand01).
+ */
+/* RANDBITS:
+ *	This symbol indicates how many bits are produced by the
+ *	function used to generate normalized random numbers.
+ *	Values include 15, 16, 31, and 48.
+ */
+#define Drand01()		rand()/(RAND_MAX+1)		/**/
+#define Rand_seed_t		unsigned int		/**/
+#define seedDrand01(x)	srand((Rand_seed_t)x)	/**/
+#define RANDBITS		15		/**/
+
+/* SELECT_MIN_BITS:
+ *	This symbol holds the minimum number of bits operated by select.
+ *	That is, if you do select(n, ...), how many bits at least will be
+ *	cleared in the masks if some activity is detected.  Usually this
+ *	is either n or 32*ceil(n/32), especially many little-endians do
+ *	the latter.  This is only useful if you have select(), naturally.
+ */
+#define SELECT_MIN_BITS 	1	/**/
+
+/* Select_fd_set_t:
+ *	This symbol holds the type used for the 2nd, 3rd, and 4th
+ *	arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
+ *	is defined, and 'int *' otherwise.  This is only useful if you 
+ *	have select(), of course.
+ */
+#define Select_fd_set_t 	fd_set *	/**/
+
+/* SIG_NAME:
+ *	This symbol contains a list of signal names in order of
+ *	signal number. This is intended
+ *	to be used as a static array initialization, like this:
+ *		char *sig_name[] = { SIG_NAME };
+ *	The signals in the list are separated with commas, and each signal
+ *	is surrounded by double quotes. There is no leading SIG in the signal
+ *	name, i.e. SIGQUIT is known as "QUIT".
+ *	Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ *	etc., where nn is the actual signal number (e.g. NUM37).
+ *	The signal number for sig_name[i] is stored in sig_num[i].
+ *	The last element is 0 to terminate the list with a NULL.  This
+ *	corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ *	This symbol contains a list of signal numbers, in the same order as the
+ *	SIG_NAME list. It is suitable for static array initialization, as in:
+ *		int sig_num[] = { SIG_NUM };
+ *	The signals in the list are separated with commas, and the indices
+ *	within that list and the SIG_NAME list match, so it's easy to compute
+ *	the signal name from a number or vice versa at the price of a small
+ *	dynamic linear lookup. 
+ *	Duplicates are allowed, but are moved to the end of the list.
+ *	The signal number corresponding to sig_name[i] is sig_number[i].
+ *	if (i < NSIG) then sig_number[i] == i.  
+ *	The last element is 0, corresponding to the 0 at the end of
+ *	the sig_name list.
+ */
+#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","CHLD","CONT","KILL","STOP","PIPE","QUIT","BUS","TRAP","TSTP","TTIN","TTOU","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0		/**/
+#define SIG_NUM  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,0		/**/
+
+/* SITEARCH:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-dependent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ *	This symbol contains the ~name expanded version of SITEARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define SITEARCH ""		/**/
+/*#define SITEARCH_EXP ""		/**/
+
+/* SITELIB:
+ *	This symbol contains the name of the private library for this package.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.  The program
+ *	should be prepared to do ~ expansion.
+ *	The standard distribution will put nothing in this directory.
+ *	After perl has been installed, users may install their own local
+ *	architecture-independent modules in this directory with
+ *		MakeMaker Makefile.PL
+ *	or equivalent.  See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ *	This symbol contains the ~name expanded version of SITELIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ *	This define is SITELIB_EXP with any trailing version-specific component
+ *	removed.  The elements in inc_version_list (inc_version_list.U) can
+ *	be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "/system/ported/perl/lib/site/5.6"		/**/
+#define SITELIB_EXP "/system/ported/perl/lib/site/5.6"		/**/
+#define SITELIB_STEM "/system/ported/perl/lib/site"		/**/
+
+/* Size_t_size:
+ *	This symbol holds the size of a Size_t in bytes.
+ */
+#define Size_t_size 4		/* */
+
+/* Size_t:
+ *	This symbol holds the type used to declare length parameters
+ *	for string functions.  It is usually size_t, but may be
+ *	unsigned long, int, etc.  It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t size_t	 /* length paramater for string functions */
+
+/* Sock_size_t:
+ *	This symbol holds the type used for the size argument of
+ *	various socket calls (just the base type, not the pointer-to).
+ */
+#define Sock_size_t		int /**/
+
+/* SSize_t:
+ *	This symbol holds the type used by functions that return
+ *	a count of bytes or an error condition.  It must be a signed type.
+ *	It is usually ssize_t, but may be long or int, etc.
+ *	It may be necessary to include <sys/types.h> or <unistd.h>
+ *	to get any typedef'ed information.
+ *	We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t	 /* signed count of bytes */
+
+/* STARTPERL:
+ *	This variable contains the string to put in front of a perl
+ *	script to make sure (one hopes) that it runs with perl and not
+ *	some shell.
+ */
+#define STARTPERL "!perl.pm"		/**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ *	This symbol, if defined, tells that there is an array
+ *	holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ *	This symbol tells the name of the array holding the stdio streams.
+ *	Usual values include _iob, __iob, and __sF.
+ */
+#define	HAS_STDIO_STREAM_ARRAY	/**/
+#define STDIO_STREAM_ARRAY	_iob
+
+/* Uid_t_f:
+ *	This symbol defines the format string used for printing a Uid_t.
+ */
+#define	Uid_t_f		"d"		/**/
+
+/* Uid_t_sign:
+ *	This symbol holds the signedess of a Uid_t.
+ *	1 for unsigned, -1 for signed.
+ */
+#define Uid_t_sign	-1		/* UID sign */
+
+/* Uid_t_size:
+ *	This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4		/* UID size */
+
+/* Uid_t:
+ *	This symbol holds the type used to declare user ids in the kernel.
+ *	It can be int, ushort, uid_t, etc... It may be necessary to include
+ *	<sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t		/* UID type */
+
+/* USE_64_BIT_INT:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be employed (be they 32 or 64 bits).  The minimal possible
+ *	64-bitness is used, just enough to get 64-bit integers into Perl.
+ *	This may mean using for example "long longs", while your memory
+ *	may still be limited to 2 gigabytes.
+ */
+/* USE_64_BIT_ALL:
+ *	This symbol, if defined, indicates that 64-bit integers should
+ *	be used when available.  If not defined, the native integers
+ *	will be used (be they 32 or 64 bits).  The maximal possible
+ *	64-bitness is employed: LP64 or ILP64, meaning that you will
+ *	be able to use more than 2 gigabytes of memory.  This mode is
+ *	even more binary incompatible than USE_64_BIT_INT. You may not
+ *	be able to run the resulting executable in a 32-bit CPU at all or
+ *	you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define	USE_64_BIT_INT		/**/
+#endif
+
+#ifndef USE_64_BIT_ALL
+/*#define	USE_64_BIT_ALL		/**/
+#endif
+
+/* USE_LARGE_FILES:
+ *	This symbol, if defined, indicates that large file support
+ *	should be used when available.
+ */
+#ifndef USE_LARGE_FILES
+/*#define	USE_LARGE_FILES		/**/
+#endif
+
+/* USE_LONG_DOUBLE:
+ *	This symbol, if defined, indicates that long doubles should
+ *	be used when available.
+ */
+#ifndef USE_LONG_DOUBLE
+#define	USE_LONG_DOUBLE		/**/
+#endif
+
+/* USE_MORE_BITS:
+ *	This symbol, if defined, indicates that 64-bit interfaces and
+ *	long doubles should be used when available.
+ */
+#ifndef USE_MORE_BITS
+/*#define	USE_MORE_BITS		/**/
+#endif
+
+/* MULTIPLICITY:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use multiplicity.
+ */
+#ifndef MULTIPLICITY
+/*#define	MULTIPLICITY		/**/
+#endif
+
+/* USE_PERLIO:
+ *	This symbol, if defined, indicates that the PerlIO abstraction should
+ *	be used throughout.  If not defined, stdio should be
+ *	used in a fully backward compatible manner.
+ */
+#ifndef USE_PERLIO
+/*#define	USE_PERLIO		/**/
+#endif
+
+/* USE_SOCKS:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define	USE_SOCKS		/**/
+#endif
+
+/* USE_ITHREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ *	This symbol, if defined, indicates that Perl should be built to
+ *	use the 5.005-based threading implementation.
+ */
+/* OLD_PTHREADS_API:
+ *	This symbol, if defined, indicates that Perl should
+ *	be built to use the old draft POSIX threads API.
+ */
+/*#define	USE_5005THREADS		/**/
+/*#define	USE_ITHREADS		/**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define		USE_THREADS		/* until src is revised*/
+#endif
+/*#define	OLD_PTHREADS_API		/**/
+
+/* PERL_VENDORARCH:
+ *	If defined, this symbol contains the name of a private library.
+ *	The library is private in the sense that it needn't be in anyone's
+ *	execution path, but it should be accessible by the world.
+ *	It may have a ~ on the front. 
+ *	The standard distribution will put nothing in this directory.
+ *	Vendors who distribute perl may wish to place their own
+ *	architecture-dependent modules and extensions in this directory with
+ *		MakeMaker Makefile.PL INSTALLDIRS=vendor 
+ *	or equivalent.  See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ *	This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PERL_VENDORARCH ""		/**/
+#define PERL_VENDORARCH_EXP ""		/**/
+
+/* PERL_VENDORLIB_EXP:
+ *	This symbol contains the ~name expanded version of VENDORLIB, to be used
+ *	in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ *	This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ *	removed.  The elements in inc_version_list (inc_version_list.U) can
+ *	be tacked onto this variable to generate a list of directories to search.
+ */
+#define PERL_VENDORLIB_EXP ""		/**/
+#define PERL_VENDORLIB_STEM ""		/**/
+
+/* VOIDFLAGS:
+ *	This symbol indicates how much support of the void type is given by this
+ *	compiler.  What various bits mean:
+ *
+ *	    1 = supports declaration of void
+ *	    2 = supports arrays of pointers to functions returning void
+ *	    4 = supports comparisons between pointers to void functions and
+ *		    addresses of void functions
+ *	    8 = suports declaration of generic void pointers
+ *
+ *	The package designer should define VOIDUSED to indicate the requirements
+ *	of the package.  This can be done either by #defining VOIDUSED before
+ *	including config.h, or by defining defvoidused in Myinit.U.  If the
+ *	latter approach is taken, only those flags will be tested.  If the
+ *	level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int		/* is void to be avoided? */
+#define M_VOID			/* Xenix strikes again */
+#endif
+
+/* PERL_XS_APIVERSION:
+ *	This variable contains the version of the oldest perl binary
+ *	compatible with the present perl.  perl.c:incpush() and
+ *	lib/lib.pm will automatically search in  for older
+ *	directories across major versions back to xs_apiversion.
+ *	This is only useful if you have a perl library directory tree
+ *	structured like the default one.
+ *	See INSTALL for how this works.
+ *	The versioned site_perl directory was introduced in 5.005,
+ *	so that is the lowest possible value.
+ *	Since this can depend on compile time options (such as
+ *	bincompat) it is set by Configure.  Other non-default sources
+ *	of potential incompatibility, such as multiplicity, threads,
+ *	debugging, 64bits, sfio, etc., are not checked for currently,
+ *	though in principle we could go snooping around in old
+ *	Config.pm files.
+ */
+/* PERL_PM_APIVERSION:
+ *	This variable contains the version of the oldest perl
+ *	compatible with the present perl.  (That is, pure perl modules
+ *	written for pm_apiversion will still work for the current
+ *	version).  perl.c:incpush() and lib/lib.pm will automatically
+ *	search in /system/ported/perl/lib/site/5.6 for older directories across major versions
+ *	back to pm_apiversion.  This is only useful if you have a perl
+ *	library directory tree structured like the default one.  The
+ *	versioned site_perl library was introduced in 5.005, so that's
+ *	the default setting for this variable.  It's hard to imagine
+ *	it changing before Perl6.  It is included here for symmetry
+ *	with xs_apiveprsion -- the searching algorithms will
+ *	(presumably) be similar.
+ *	See the INSTALL file for how this works.
+ */
+#define PERL_XS_APIVERSION "5.00563"
+#define PERL_PM_APIVERSION "5.005"
+
+/* HAS_GETPGRP:
+ *	This symbol, if defined, indicates that the getpgrp routine is
+ *	available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ *	This symbol, if defined, indicates that getpgrp needs one
+ *	arguments whereas USG one needs none.
+ */
+#define HAS_GETPGRP		/**/
+/*#define USE_BSD_GETPGRP	/**/
+
+/* HAS_SETPGRP:
+ *	This symbol, if defined, indicates that the setpgrp routine is
+ *	available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ *	This symbol, if defined, indicates that setpgrp needs two
+ *	arguments whereas USG one needs none.  See also HAS_SETPGID
+ *	for a POSIX interface.
+ */
+/*#define HAS_SETPGRP		/**/
+/*#define USE_BSD_SETPGRP	/**/
+
+/* HAS__FWALK:
+ *	This symbol, if defined, indicates that the _fwalk system call is
+ *	available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK		/**/
+
+/* FCNTL_CAN_LOCK:
+ *	This symbol, if defined, indicates that fcntl() can be used
+ *	for file locking.  Normally on Unix systems this is defined.
+ *	It may be undefined on VMS.
+ */
+#define FCNTL_CAN_LOCK		/**/
+
+/* HAS_FSYNC:
+ *	This symbol, if defined, indicates that the fsync routine is
+ *	available to write a file's modified data and attributes to
+ *	permanent storage.
+ */
+/*#define HAS_FSYNC		/**/
+
+/* HAS_SBRK_PROTO:
+ *	This symbol, if defined, indicates that the system provides
+ *	a prototype for the sbrk() function.  Otherwise, it is up
+ *	to the program to supply one.  Good guesses are
+ *		extern void* sbrk _((int));
+ *		extern void* sbrk _((size_t));
+ */
+/*#define	HAS_SBRK_PROTO	/**/
+
+#endif