Apply local patches, remove excess files - perl-5.30.1

Timing is good deraadt@, OK sthen@

53 files changed, 486 insertions, 598 deletions

diff --git a/gnu/usr.bin/perl/Configure b/gnu/usr.bin/perl/Configure
index 684a9c07686..4b869dcede1 100644
--- a/gnu/usr.bin/perl/Configure
+++ b/gnu/usr.bin/perl/Configure
@@ -5483,6 +5483,25 @@ default|recommended)
 		eval $checkccflag
 		;;
 	esac
+	case "$gccversion" in
+	1*) ;;
+	2*) ;;
+	?*) 	echo " "
+		echo "Checking if your compiler accepts -fno-delete-null-pointer-checks" 2>&1
+		echo 'int main(void) { return 0; }' > gcctest.c
+		if $cc -O2 -fno-delete-null-pointer-checks -o gcctest gcctest.c; then
+			echo "Yes, it does." 2>&1
+			case "$ccflags" in
+			*delete-null-pointer-checks*)
+				echo "Leaving current flags $ccflags alone." 2>&1
+				;;
+			*) dflt="$dflt -fno-delete-null-pointer-checks" ;;
+			esac
+		else
+			echo "Nope, it doesn't, but that's ok." 2>&1
+		fi
+		;;
+	esac
 	# For gcc, adding -pipe speeds up compilations for some, but apparently
 	# some assemblers can't read from stdin.  (It also slows down compilations
 	# in other cases, but those are apparently rarer these days.)  AD 5/2004.
@@ -20574,9 +20593,9 @@ case "$ccflags" in
 	;;
 esac
 
-randfunc=Perl_drand48
-drand01="Perl_drand48()"
-seedfunc="Perl_drand48_init"
+randfunc=drand48
+drand01="drand48()"
+seedfunc="srand48"
 randbits=48
 randseedtype=U32
 
@@ -23427,6 +23446,7 @@ xs_extensions=''
 find_extensions='
     for xxx in *; do
 	case "$xxx" in
+	    CVS) ;;
 	    DynaLoader|dynaload) ;;
 	    *)
 	    this_ext=`echo "$xxx" | $sed -e s/-/\\\//g`;
@@ -23664,6 +23684,8 @@ esac
 nonxs_ext=''
 for xxx in $nonxs_extensions ; do
 	case "$xxx" in
+	CVS|RCS|SCCS|.svn)
+		;;
 	VMS*)
 		;;
 	*)	nonxs_ext="$nonxs_ext $xxx"
diff --git a/gnu/usr.bin/perl/MANIFEST b/gnu/usr.bin/perl/MANIFEST
index 5ef609b4c09..be24967b2e2 100644
--- a/gnu/usr.bin/perl/MANIFEST
+++ b/gnu/usr.bin/perl/MANIFEST
@@ -17,6 +17,7 @@ caretx.c		C file to create $^X
 cflags.SH		A script that emits C compilation flags per file
 Changes			Describe how to peruse changes between releases
 charclass_invlists.h	Compiled-in inversion lists
+config.over		Site-specific overrides for Configure defaults
 config_h.SH		Produces config.h
 configpm		Produces lib/Config.pm
 Configure		Portability tool
@@ -1491,6 +1492,16 @@ cpan/NEXT/t/dynamically_scoped_regex_vars.t	NEXT
 cpan/NEXT/t/next.t		NEXT
 cpan/NEXT/t/stringify.t		NEXT
 cpan/NEXT/t/unseen.t		NEXT
+cpan/OpenBSD-MkTemp/lib/OpenBSD/MkTemp.pm		OpenBSD::MkTemp
+cpan/OpenBSD-MkTemp/MkTemp.xs		OpenBSD::MkTemp
+cpan/OpenBSD-MkTemp/README		OpenBSD::MkTemp Readme
+cpan/OpenBSD-MkTemp/t/OpenBSD-MkTemp.t		OpenBSD::MkTemp test file
+cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm	OpenBSD::Pledge
+cpan/OpenBSD-Pledge/Pledge.xs	OpenBSD::Pledge
+cpan/OpenBSD-Pledge/t/OpenBSD-Pledge.t	OpenBSD::Pledge test file
+cpan/OpenBSD-Unveil/lib/OpenBSD/Unveil.pm	OpenBSD::Unveil
+cpan/OpenBSD-Unveil/t/OpenBSD-Unveil.t	OpenBSD::Unveil test file
+cpan/OpenBSD-Unveil/Unveil.xs	OpenBSD::Unveil
 cpan/Params-Check/lib/Params/Check.pm	Params::Check
 cpan/Params-Check/t/01_Params-Check.t	Params::Check tests
 cpan/parent/lib/parent.pm			Establish an ISA relationship with base classes at compile time
@@ -2007,6 +2018,17 @@ cpan/Term-ANSIColor/t/module/stringify.t
 cpan/Term-ANSIColor/t/taint/basic.t
 cpan/Term-Cap/Cap.pm			Perl module supporting termcap usage
 cpan/Term-Cap/test.pl			See if Term::Cap works
+cpan/Term-ReadKey/Changes			Term::ReadKey
+cpan/Term-ReadKey/Configure.pm			Term::ReadKey
+cpan/Term-ReadKey/example/test.pl		Term::ReadKey
+cpan/Term-ReadKey/genchars.pl			Term::ReadKey
+cpan/Term-ReadKey/Makefile.PL			Term::ReadKey
+cpan/Term-ReadKey/ppport.h			Term::ReadKey
+cpan/Term-ReadKey/ReadKey.pm			Term::ReadKey
+cpan/Term-ReadKey/ReadKey.xs			Term::ReadKey
+cpan/Term-ReadKey/README			Term::ReadKey
+cpan/Term-ReadKey/t/01_basic.t			Term::ReadKey
+cpan/Term-ReadKey/t/02_terminal_functions.t	Term::ReadKey
 cpan/Test-Harness/bin/prove				The prove harness utility
 cpan/Test-Harness/lib/App/Prove.pm			Gubbins for the prove utility
 cpan/Test-Harness/lib/App/Prove/State.pm		Gubbins for the prove utility
@@ -3939,7 +3961,6 @@ ext/B/B/Showlex.pm	Compiler Showlex backend
 ext/B/B/Terse.pm	Compiler Terse backend
 ext/B/B/Xref.pm		Compiler Xref backend
 ext/B/hints/darwin.pl	Hints for named architecture
-ext/B/hints/openbsd.pl	Hints for named architecture
 ext/B/Makefile.PL	Compiler backend makefile writer
 ext/B/O.pm		Compiler front-end module (-MO=...)
 ext/B/t/b.t		See if B works
@@ -4411,6 +4432,7 @@ fakesdio.h			stdio in terms of PerlIO
 feature.h			Feature header
 form.h				Public declarations for formats
 generate_uudmap.c		Generate uudmap.h, the uuencode decoding map
+git_version.h			Pre-generated git_version.h for OpenBSD
 globals.c			File to declare global symbols (for shared library)
 globvar.sym			Global variables that need hiding when embedded
 gv.c				Glob value code
@@ -4556,6 +4578,7 @@ lib/Class/Struct.t		See if Class::Struct works
 lib/Config.t			See if Config works
 lib/Config/Extensions.pm	Convenient hash lookup for built extensions
 lib/Config/Extensions.t		See if Config::Extensions works
+lib/Config_git.pl		Pre-generated Config_git.pl for OpenBSD
 lib/CORE.pod			document the CORE namespace
 lib/DB.pm			Debugger API (draft)
 lib/DB.t			See if DB works
diff --git a/gnu/usr.bin/perl/Makefile.SH b/gnu/usr.bin/perl/Makefile.SH
index be624491e62..dc9e5b6d07b 100644
--- a/gnu/usr.bin/perl/Makefile.SH
+++ b/gnu/usr.bin/perl/Makefile.SH
@@ -487,7 +487,7 @@ shextract=`SH_to_target $SH`
 ## In the following dollars and backticks do not need the extra backslash.
 $spitshell >>$Makefile <<!GROK!THIS!
 
-private = preplibrary \$(CONFIGPM) \$(CONFIGPOD) git_version.h lib/buildcustomize.pl
+private = preplibrary \$(CONFIGPM) \$(CONFIGPOD) lib/buildcustomize.pl
 
 # Files to be built with variable substitution before miniperl
 # is available.
@@ -646,15 +646,16 @@ $(MANIFEST_SRT):	MANIFEST $(PERL_EXE)
 
 .PHONY: all utilities
 
+# OpenBSD uses pre-generated lib/Config_git.pl and git_version.h files
 # Both git_version.h and lib/Config_git.pl are built
 # by make_patchnum.pl.
-git_version.h: lib/Config_git.pl
-
-lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
-	$(MINIPERL) make_patchnum.pl
-
-# make sure that we recompile perl.c if the git version changes
-perl$(OBJ_EXT): git_version.h
+#git_version.h: lib/Config_git.pl
+#
+#lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
+#	$(MINIPERL) make_patchnum.pl
+#
+## make sure that we recompile perl.c if the git version changes
+#perl$(OBJ_EXT): git_version.h
 
 !NO!SUBS!
 
@@ -820,11 +821,11 @@ CCDLFLAGS		= `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
 LIBPERL_NONSHR		= libperl_nonshr$(LIB_EXT)
 MINIPERL_NONSHR		= miniperl_nonshr$(EXE_EXT)
 
-$(LIBPERL_NONSHR): $(perllib_objs)
-	$(RMS) $(LIBPERL_NONSHR)
-	$(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
+#$(LIBPERL_NONSHR): $(perllib_objs)
+#	$(RMS) $(LIBPERL_NONSHR)
+#	$(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
 
-$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)  perlmini$(OBJ_EXT)
+$(MINIPERL_NONSHR): miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)  perlmini$(OBJ_EXT)
 	$(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
 	    opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
 
@@ -923,33 +924,33 @@ $(DTRACE_MAIN_O): perldtrace.d perlmain$(OBJ_EXT)
 !NO!SUBS!
 		;;
     esac
-	$spitshell >>$Makefile <<'!NO!SUBS!'
-$(LIBPERL): $& $(perllib_dep) $(DYNALOADER) $(LIBPERLEXPORT)
-!NO!SUBS!
-	case "$useshrplib" in
-	true)
-		$spitshell >>$Makefile <<'!NO!SUBS!'
-	rm -f $@
-	$(LD) -o $@ $(SHRPLDFLAGS) $(perllib_objs) $(DYNALOADER) $(libs)
-!NO!SUBS!
-		case "$osname" in
-		aix)
-			$spitshell >>$Makefile <<'!NO!SUBS!'
-	rm -f libperl$(OBJ_EXT)
-	mv $@ libperl$(OBJ_EXT)
-	$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
-!NO!SUBS!
-			;;
-		esac
-		;;
-	*)
-		$spitshell >>$Makefile <<'!NO!SUBS!'
-	rm -f $(LIBPERL)
-	$(AR) rc $(LIBPERL) $(perllib_objs) $(DYNALOADER)
-	@$(ranlib) $(LIBPERL)
-!NO!SUBS!
-		;;
-	esac
+#	$spitshell >>$Makefile <<'!NO!SUBS!'
+#$(LIBPERL): $& $(perllib_dep) $(DYNALOADER) $(LIBPERLEXPORT)
+#!NO!SUBS!
+#	case "$useshrplib" in
+#	true)
+#		$spitshell >>$Makefile <<'!NO!SUBS!'
+#	rm -f $@
+#	$(LD) -o $@ $(SHRPLDFLAGS) $(perllib_objs) $(DYNALOADER) $(libs)
+#!NO!SUBS!
+#		case "$osname" in
+#		aix)
+#			$spitshell >>$Makefile <<'!NO!SUBS!'
+#	rm -f libperl$(OBJ_EXT)
+#	mv $@ libperl$(OBJ_EXT)
+#	$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
+#!NO!SUBS!
+#			;;
+#		esac
+#		;;
+#	*)
+#		$spitshell >>$Makefile <<'!NO!SUBS!'
+#	rm -f $(LIBPERL)
+#	$(AR) rc $(LIBPERL) $(perllib_objs) $(DYNALOADER)
+#	@$(ranlib) $(LIBPERL)
+#!NO!SUBS!
+#		;;
+#	esac
 	$spitshell >>$Makefile <<'!NO!SUBS!'
 
 # How to build executables.
@@ -1015,10 +1016,6 @@ NAMESPACEFLAGS = -force_flat_namespace
 		esac
 		$spitshell >>$Makefile <<'!NO!SUBS!'
 lib/buildcustomize.pl: $& $(miniperl_objs) write_buildcustomize.pl
-	-@rm -f miniperl.xok
-	$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
-	    $(miniperl_objs) $(libs)
-	$(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl.  Please run make minitest; exit 1'
 	$(MINIPERL) -f write_buildcustomize.pl
 !NO!SUBS!
 		;;
@@ -1132,10 +1129,7 @@ $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git
 unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
 
 uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
-	$(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
-#	Commented out so always runs, mktables looks at far more files than we
-#	can in this makefile to decide if needs to run or not
-#	touch uni.data
+	touch uni.data
 
 # $(PERL_EXE) and ext because pod_lib.pl needs Digest::MD5
 # But also this ensures that all extensions are built before we try to scan
@@ -1382,7 +1376,7 @@ _mopup:
 	-rm -f *perl.xok
 	-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
 	-rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
-	-rm -f config.arch config.over $(DTRACE_H)
+	-rm -f $(DTRACE_H)
 
 _cleaner1:
 	-cd os2; rm -f Makefile
@@ -1447,10 +1441,10 @@ _cleaner2:
 	-rmdir lib/Sys/Syslog lib/Sys lib/Sub lib/Search lib/Scalar
 	-rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/PerlIO/via
 	-rmdir lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse lib/Params
-	-rmdir lib/Net/FTP lib/Module/Load lib/Module/CoreList lib/Module
-	-rmdir lib/Memoize lib/Math/BigInt lib/Math/BigFloat lib/Math lib/MIME
-	-rmdir lib/Locale/Maketext lib/Locale lib/List/Util lib/List
-	-rmdir lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
+	-rmdir lib/OpenBSD lib/Net/FTP lib/Module/Load lib/Module/CoreList
+	-rmdir lib/Module lib/Memoize lib/Math/BigInt lib/Math/BigFloat
+	-rmdir lib/Math lib/MIME lib/Locale/Maketext lib/Locale lib/List/Util
+	-rmdir lib/List lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
 	-rmdir lib/IO/Uncompress lib/IO/Socket lib/IO/Compress/Zlib
 	-rmdir lib/IO/Compress/Zip lib/IO/Compress/Gzip lib/IO/Compress/Base
 	-rmdir lib/IO/Compress/Adapter lib/IO/Compress lib/IO
diff --git a/gnu/usr.bin/perl/Makefile.bsd-wrapper1 b/gnu/usr.bin/perl/Makefile.bsd-wrapper1
index a6c9c467f88..8e4c5a1836f 100644
--- a/gnu/usr.bin/perl/Makefile.bsd-wrapper1
+++ b/gnu/usr.bin/perl/Makefile.bsd-wrapper1
@@ -111,6 +111,7 @@ _quick3p=
     perl5280delta 1			pod/perl5280delta.pod \
     perl5281delta 1			pod/perl5281delta.pod \
     perl5282delta 1			pod/perl5282delta.pod \
+    perl5300delta 1			pod/perl5300delta.pod \
     perl561delta 1			pod/perl561delta.pod \
     perl56delta 1			pod/perl56delta.pod \
     perl581delta 1			pod/perl581delta.pod \
@@ -249,7 +250,6 @@ _quick3p=
     App::Prove::State::Result::Test 3p	lib/App/Prove/State/Result/Test.pm \
     Archive::Tar 3p			lib/Archive/Tar.pm \
     Archive::Tar::File 3p		lib/Archive/Tar/File.pm \
-    arybase 3p				lib/arybase.pm \
     Attribute::Handlers 3p		lib/Attribute/Handlers.pm \
     attributes 3p			lib/attributes.pm \
     autodie 3p				lib/autodie.pm \
@@ -265,7 +265,6 @@ _quick3p=
     autouse 3p				lib/autouse.pm \
     B 3p				lib/B.pm \
     B::Concise 3p			lib/B/Concise.pm \
-    B::Debug 3p				lib/B/Debug.pm \
     B::Deparse 3p			lib/B/Deparse.pm \
     B::Op_private 3p			lib/B/Op_private.pm \
     B::Showlex 3p			lib/B/Showlex.pm \
@@ -509,30 +508,15 @@ _quick3p=
     List::Util 3p			lib/List/Util.pm \
     List::Util::XS 3p			lib/List/Util/XS.pm \
     locale 3p				lib/locale.pm \
-    Locale::Codes 3p			lib/Locale/Codes.pod \
-    Locale::Codes::Changes 3p		lib/Locale/Codes/Changes.pod \
-    Locale::Codes::Country 3p		lib/Locale/Codes/Country.pod \
-    Locale::Codes::Currency 3p		lib/Locale/Codes/Currency.pod \
-    Locale::Codes::LangExt 3p		lib/Locale/Codes/LangExt.pod \
-    Locale::Codes::LangFam 3p		lib/Locale/Codes/LangFam.pod \
-    Locale::Codes::Language 3p		lib/Locale/Codes/Language.pod \
-    Locale::Codes::LangVar 3p		lib/Locale/Codes/LangVar.pod \
-    Locale::Codes::Script 3p		lib/Locale/Codes/Script.pod \
-    Locale::Codes::Types 3p		lib/Locale/Codes/Types.pod \
-    Locale::Country 3p			lib/Locale/Country.pod \
-    Locale::Currency 3p			lib/Locale/Currency.pod \
-    Locale::Language 3p			lib/Locale/Language.pod \
     Locale::Maketext 3p			lib/Locale/Maketext.pod \
     Locale::Maketext::Cookbook 3p	lib/Locale/Maketext/Cookbook.pod \
     Locale::Maketext::Guts 3p		lib/Locale/Maketext/Guts.pm \
     Locale::Maketext::GutsLoader 3p	lib/Locale/Maketext/GutsLoader.pm \
     Locale::Maketext::Simple 3p		lib/Locale/Maketext/Simple.pm \
     Locale::Maketext::TPJ13 3p		lib/Locale/Maketext/TPJ13.pod \
-    Locale::Script 3p			lib/Locale/Script.pod \
     Math::BigFloat 3p			lib/Math/BigFloat.pm \
     Math::BigInt 3p			lib/Math/BigInt.pm \
     Math::BigInt::Calc 3p		lib/Math/BigInt/Calc.pm \
-    Math::BigInt::CalcEmu 3p		lib/Math/BigInt/CalcEmu.pm \
     Math::BigInt::FastCalc 3p		lib/Math/BigInt/FastCalc.pm \
     Math::BigInt::Lib 3p		lib/Math/BigInt/Lib.pm \
     Math::BigRat 3p			lib/Math/BigRat.pm \
@@ -743,7 +727,9 @@ _quick3p=
     Test2::EventFacet::Assert 3p	lib/Test2/EventFacet/Assert.pm \
     Test2::EventFacet::Control 3p	lib/Test2/EventFacet/Control.pm \
     Test2::EventFacet::Error 3p		lib/Test2/EventFacet/Error.pm \
+    Test2::EventFacet::Hub 3p		lib/Test2/EventFacet/Hub.pm \
     Test2::EventFacet::Info 3p		lib/Test2/EventFacet/Info.pm \
+    Test2::EventFacet::Info::Table 3p	lib/Test2/EventFacet/Info/Table.pm \
     Test2::EventFacet::Meta 3p		lib/Test2/EventFacet/Meta.pm \
     Test2::EventFacet::Parent 3p	lib/Test2/EventFacet/Parent.pm \
     Test2::EventFacet::Plan 3p		lib/Test2/EventFacet/Plan.pm \
diff --git a/gnu/usr.bin/perl/Porting/Maintainers.pl b/gnu/usr.bin/perl/Porting/Maintainers.pl
index dfc7b50441b..4a0e489ef7d 100644
--- a/gnu/usr.bin/perl/Porting/Maintainers.pl
+++ b/gnu/usr.bin/perl/Porting/Maintainers.pl
@@ -1423,6 +1423,9 @@ use File::Glob qw(:case);
                 lib/vmsish.{pm,t}
                 ],
     },
+    'openbsd' => {
+        'FILES'      => q[lib/Config_git.pl],
+    },
 );
 
 # legacy CPAN flag
diff --git a/gnu/usr.bin/perl/Porting/pumpkin.pod b/gnu/usr.bin/perl/Porting/pumpkin.pod
index 55131822a53..6f4ef812bc5 100644
--- a/gnu/usr.bin/perl/Porting/pumpkin.pod
+++ b/gnu/usr.bin/perl/Porting/pumpkin.pod
@@ -544,9 +544,9 @@ Here's how I generate a new patch.  I'll use the hypothetical
 5.004_07 to 5.004_08 patch as an example.
 
 	# unpack perl5.004_07/
-	gzip -d -c perl5.004_07.tar.gz | tar -xof -
+	gzip -d -c perl5.004_07.tar.gz | tar -xf -
 	# unpack perl5.004_08/
-	gzip -d -c perl5.004_08.tar.gz | tar -xof -
+	gzip -d -c perl5.004_08.tar.gz | tar -xf -
 	makepatch perl5.004_07 perl5.004_08 > perl5.004_08.pat
 
 Makepatch will automatically generate appropriate B<rm> commands to remove
diff --git a/gnu/usr.bin/perl/configpm b/gnu/usr.bin/perl/configpm
index c8de8bfd155..ad22cc0fdd5 100644
--- a/gnu/usr.bin/perl/configpm
+++ b/gnu/usr.bin/perl/configpm
@@ -1130,6 +1130,18 @@ my $orig_heavy_txt = "";
 }
 
 if ($orig_config_txt ne $config_txt or $orig_heavy_txt ne $heavy_txt) {
+    # During the build don't look in /usr/local for libs or includes
+    # but after, we want to let modules look there.
+    my $install_heavy_txt = $heavy_txt;
+    $install_heavy_txt =~ s,^(ccflags|cppflags)[^=]*='[^']+,$& -I/usr/local/include,gm;
+    $install_heavy_txt =~ s,^(ldflags|lddlflags)[^=]*='[^']+,$& -L/usr/local/lib,gm;
+
+    open INSTALL_CONFIG_HEAVY, ">", "$Config_heavy.install"
+         or die "Can't open install $Config_heavy: $!\n";
+    print INSTALL_CONFIG_HEAVY $install_heavy_txt;
+    close INSTALL_CONFIG_HEAVY;
+    print "updated install $Config_heavy\n";
+
     open CONFIG, ">", $Config_PM or die "Can't open $Config_PM: $!\n";
     open CONFIG_HEAVY, ">", $Config_heavy or die "Can't open $Config_heavy: $!\n";
     print CONFIG $config_txt;
diff --git a/gnu/usr.bin/perl/cpan/Compress-Raw-Bzip2/private/MakeUtil.pm b/gnu/usr.bin/perl/cpan/Compress-Raw-Bzip2/private/MakeUtil.pm
index 12fa26fd05f..037782b9498 100644
--- a/gnu/usr.bin/perl/cpan/Compress-Raw-Bzip2/private/MakeUtil.pm
+++ b/gnu/usr.bin/perl/cpan/Compress-Raw-Bzip2/private/MakeUtil.pm
@@ -35,7 +35,8 @@ sub MY::libscan
     my $path = shift;
 
     return undef
-        if $path =~ /(~|\.bak|_bak)$/ ||
+        if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+           $path =~ /(~|\.bak|_bak)$/ ||
            $path =~ /\..*\.sw(o|p)$/  ||
            $path =~ /\B\.svn\b/;
 
diff --git a/gnu/usr.bin/perl/cpan/Compress-Raw-Zlib/private/MakeUtil.pm b/gnu/usr.bin/perl/cpan/Compress-Raw-Zlib/private/MakeUtil.pm
index 12fa26fd05f..037782b9498 100644
--- a/gnu/usr.bin/perl/cpan/Compress-Raw-Zlib/private/MakeUtil.pm
+++ b/gnu/usr.bin/perl/cpan/Compress-Raw-Zlib/private/MakeUtil.pm
@@ -35,7 +35,8 @@ sub MY::libscan
     my $path = shift;
 
     return undef
-        if $path =~ /(~|\.bak|_bak)$/ ||
+        if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+           $path =~ /(~|\.bak|_bak)$/ ||
            $path =~ /\..*\.sw(o|p)$/  ||
            $path =~ /\B\.svn\b/;
 
diff --git a/gnu/usr.bin/perl/cpan/Digest-MD5/MD5.xs b/gnu/usr.bin/perl/cpan/Digest-MD5/MD5.xs
index a48d951056c..fda44bbe4a9 100644
--- a/gnu/usr.bin/perl/cpan/Digest-MD5/MD5.xs
+++ b/gnu/usr.bin/perl/cpan/Digest-MD5/MD5.xs
@@ -39,6 +39,8 @@ extern "C" {
 #include "EXTERN.h"
 #include "perl.h"
 #include "XSUB.h"
+#include <sys/types.h>
+#include <md5.h>
 #ifdef __cplusplus
 }
 #endif
@@ -88,61 +90,6 @@ static MAGIC *THX_sv_magicext(pTHX_ SV *sv, SV *obj, int type,
 # define SvPVbyte(sv, lp) (sv_utf8_downgrade((sv), 0), SvPV((sv), (lp)))
 #endif
 
-/* Perl does not guarantee that U32 is exactly 32 bits.  Some system
- * has no integral type with exactly 32 bits.  For instance, A Cray has
- * short, int and long all at 64 bits so we need to apply this macro
- * to reduce U32 values to 32 bits at appropriate places. If U32
- * really does have 32 bits then this is a no-op.
- */
-#if BYTEORDER > 0x4321 || defined(TRUNCATE_U32)
-  #define TO32(x)    ((x) &  0xFFFFffff)
-  #define TRUNC32(x) ((x) &= 0xFFFFffff)
-#else
-  #define TO32(x)    (x)
-  #define TRUNC32(x) /*nothing*/
-#endif
-
-/* The MD5 algorithm is defined in terms of little endian 32-bit
- * values.  The following macros (and functions) allow us to convert
- * between native integers and such values.
- */
-#undef BYTESWAP
-#ifndef U32_ALIGNMENT_REQUIRED
- #if BYTEORDER == 0x1234      /* 32-bit little endian */
-  #define BYTESWAP(x) (x)     /* no-op */
-
- #elif BYTEORDER == 0x4321    /* 32-bit big endian */
-  #define BYTESWAP(x) 	((((x)&0xFF)<<24)	\
-			|(((x)>>24)&0xFF)	\
-			|(((x)&0x0000FF00)<<8)	\
-			|(((x)&0x00FF0000)>>8)	)
- #endif
-#endif
-
-#ifndef BYTESWAP
-static void u2s(U32 u, U8* s)
-{
-    *s++ = (U8)(u         & 0xFF);
-    *s++ = (U8)((u >>  8) & 0xFF);
-    *s++ = (U8)((u >> 16) & 0xFF);
-    *s   = (U8)((u >> 24) & 0xFF);
-}
-
-#define s2u(s,u) ((u) =  (U32)(*s)            |  \
-                        ((U32)(*(s+1)) << 8)  |  \
-                        ((U32)(*(s+2)) << 16) |  \
-                        ((U32)(*(s+3)) << 24))
-#endif
-
-/* This structure keeps the current state of algorithm.
- */
-typedef struct {
-  U32 A, B, C, D;  /* current digest */
-  U32 bytes_low;   /* counts bytes in message */
-  U32 bytes_high;  /* turn it into a 64-bit counter */
-  U8 buffer[128];  /* collect complete 64 byte blocks */
-} MD5_CTX;
-
 #if defined(USE_ITHREADS) && defined(MGf_DUP)
 STATIC int dup_md5_ctx(pTHX_ MAGIC *mg, CLONE_PARAMS *params)
 {
@@ -179,325 +126,6 @@ STATIC const struct {
 };
 #endif
 
-
-/* Padding is added at the end of the message in order to fill a
- * complete 64 byte block (- 8 bytes for the message length).  The
- * padding is also the reason the buffer in MD5_CTX have to be
- * 128 bytes.
- */
-static const unsigned char PADDING[64] = {
-  0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* Constants for MD5Transform routine.
- */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
-
-/* F, G, H and I are basic MD5 functions.
- */
-#define F(x, y, z) ((((x) & ((y) ^ (z))) ^ (z)))
-#define G(x, y, z) F(z, x, y)
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits.
- */
-#define ROTATE_LEFT(x, n) (((x) << (n) | ((x) >> (32-(n)))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4.
- * Rotation is separate from addition to prevent recomputation.
- */
-#define FF(a, b, c, d, s, ac)                    \
- (a) += F ((b), (c), (d)) + (NEXTx) + (U32)(ac); \
- TRUNC32((a));                                   \
- (a) = ROTATE_LEFT ((a), (s));                   \
- (a) += (b);                                     \
- TRUNC32((a));
-
-#define GG(a, b, c, d, x, s, ac)                 \
- (a) += G ((b), (c), (d)) + X[x] + (U32)(ac);    \
- TRUNC32((a));                                   \
- (a) = ROTATE_LEFT ((a), (s));                   \
- (a) += (b);                                     \
- TRUNC32((a));
-
-#define HH(a, b, c, d, x, s, ac)                 \
- (a) += H ((b), (c), (d)) + X[x] + (U32)(ac);    \
- TRUNC32((a));                                   \
- (a) = ROTATE_LEFT ((a), (s));                   \
- (a) += (b);                                     \
- TRUNC32((a));
-
-#define II(a, b, c, d, x, s, ac)                 \
- (a) += I ((b), (c), (d)) + X[x] + (U32)(ac);    \
- TRUNC32((a));                                   \
- (a) = ROTATE_LEFT ((a), (s));                   \
- (a) += (b);                                     \
- TRUNC32((a));
-
-
-static void
-MD5Init(MD5_CTX *ctx)
-{
-  /* Start state */
-  ctx->A = 0x67452301;
-  ctx->B = 0xefcdab89;
-  ctx->C = 0x98badcfe;
-  ctx->D = 0x10325476;
-
-  /* message length */
-  ctx->bytes_low = ctx->bytes_high = 0;
-}
-
-
-static void
-MD5Transform(MD5_CTX* ctx, const U8* buf, STRLEN blocks)
-{
-#ifdef MD5_DEBUG
-    static int tcount = 0;
-#endif
-
-    U32 A = ctx->A;
-    U32 B = ctx->B;
-    U32 C = ctx->C;
-    U32 D = ctx->D;
-
-#ifndef U32_ALIGNMENT_REQUIRED
-    const U32 *x = (U32*)buf;  /* really just type casting */
-#endif
-
-    do {
-	U32 a = A;
-	U32 b = B;
-	U32 c = C;
-	U32 d = D;
-
-#if BYTEORDER == 0x1234 && !defined(U32_ALIGNMENT_REQUIRED)
-	const U32 *X = x;
-        #define NEXTx  (*x++)
-#else
-	U32 X[16];      /* converted values, used in round 2-4 */
-	U32 *uptr = X;
-	U32 tmp;
- #ifdef BYTESWAP
-        #define NEXTx  (tmp=*x++, *uptr++ = BYTESWAP(tmp))
- #else
-        #define NEXTx  (s2u(buf,tmp), buf += 4, *uptr++ = tmp)
- #endif
-#endif
-
-#ifdef MD5_DEBUG
-	if (buf == ctx->buffer)
-	    fprintf(stderr,"%5d: Transform ctx->buffer", ++tcount);
-	else 
-	    fprintf(stderr,"%5d: Transform %p (%d)", ++tcount, buf, blocks);
-
-	{
-	    int i;
-	    fprintf(stderr,"[");
-	    for (i = 0; i < 16; i++) {
-		fprintf(stderr,"%x,", x[i]);
-	    }
-	    fprintf(stderr,"]\n");
-	}
-#endif
-
-	/* Round 1 */
-	FF (a, b, c, d, S11, 0xd76aa478); /* 1 */
-	FF (d, a, b, c, S12, 0xe8c7b756); /* 2 */
-	FF (c, d, a, b, S13, 0x242070db); /* 3 */
-	FF (b, c, d, a, S14, 0xc1bdceee); /* 4 */
-	FF (a, b, c, d, S11, 0xf57c0faf); /* 5 */
-	FF (d, a, b, c, S12, 0x4787c62a); /* 6 */
-	FF (c, d, a, b, S13, 0xa8304613); /* 7 */
-	FF (b, c, d, a, S14, 0xfd469501); /* 8 */
-	FF (a, b, c, d, S11, 0x698098d8); /* 9 */
-	FF (d, a, b, c, S12, 0x8b44f7af); /* 10 */
-	FF (c, d, a, b, S13, 0xffff5bb1); /* 11 */
-	FF (b, c, d, a, S14, 0x895cd7be); /* 12 */
-	FF (a, b, c, d, S11, 0x6b901122); /* 13 */
-	FF (d, a, b, c, S12, 0xfd987193); /* 14 */
-	FF (c, d, a, b, S13, 0xa679438e); /* 15 */
-	FF (b, c, d, a, S14, 0x49b40821); /* 16 */
-
-	/* Round 2 */
-	GG (a, b, c, d,  1, S21, 0xf61e2562); /* 17 */
-	GG (d, a, b, c,  6, S22, 0xc040b340); /* 18 */
-	GG (c, d, a, b, 11, S23, 0x265e5a51); /* 19 */
-	GG (b, c, d, a,  0, S24, 0xe9b6c7aa); /* 20 */
-	GG (a, b, c, d,  5, S21, 0xd62f105d); /* 21 */
-	GG (d, a, b, c, 10, S22,  0x2441453); /* 22 */
-	GG (c, d, a, b, 15, S23, 0xd8a1e681); /* 23 */
-	GG (b, c, d, a,  4, S24, 0xe7d3fbc8); /* 24 */
-	GG (a, b, c, d,  9, S21, 0x21e1cde6); /* 25 */
-	GG (d, a, b, c, 14, S22, 0xc33707d6); /* 26 */
-	GG (c, d, a, b,  3, S23, 0xf4d50d87); /* 27 */
-	GG (b, c, d, a,  8, S24, 0x455a14ed); /* 28 */
-	GG (a, b, c, d, 13, S21, 0xa9e3e905); /* 29 */
-	GG (d, a, b, c,  2, S22, 0xfcefa3f8); /* 30 */
-	GG (c, d, a, b,  7, S23, 0x676f02d9); /* 31 */
-	GG (b, c, d, a, 12, S24, 0x8d2a4c8a); /* 32 */
-
-	/* Round 3 */
-	HH (a, b, c, d,  5, S31, 0xfffa3942); /* 33 */
-	HH (d, a, b, c,  8, S32, 0x8771f681); /* 34 */
-	HH (c, d, a, b, 11, S33, 0x6d9d6122); /* 35 */
-	HH (b, c, d, a, 14, S34, 0xfde5380c); /* 36 */
-	HH (a, b, c, d,  1, S31, 0xa4beea44); /* 37 */
-	HH (d, a, b, c,  4, S32, 0x4bdecfa9); /* 38 */
-	HH (c, d, a, b,  7, S33, 0xf6bb4b60); /* 39 */
-	HH (b, c, d, a, 10, S34, 0xbebfbc70); /* 40 */
-	HH (a, b, c, d, 13, S31, 0x289b7ec6); /* 41 */
-	HH (d, a, b, c,  0, S32, 0xeaa127fa); /* 42 */
-	HH (c, d, a, b,  3, S33, 0xd4ef3085); /* 43 */
-	HH (b, c, d, a,  6, S34,  0x4881d05); /* 44 */
-	HH (a, b, c, d,  9, S31, 0xd9d4d039); /* 45 */
-	HH (d, a, b, c, 12, S32, 0xe6db99e5); /* 46 */
-	HH (c, d, a, b, 15, S33, 0x1fa27cf8); /* 47 */
-	HH (b, c, d, a,  2, S34, 0xc4ac5665); /* 48 */
-
-	/* Round 4 */
-	II (a, b, c, d,  0, S41, 0xf4292244); /* 49 */
-	II (d, a, b, c,  7, S42, 0x432aff97); /* 50 */
-	II (c, d, a, b, 14, S43, 0xab9423a7); /* 51 */
-	II (b, c, d, a,  5, S44, 0xfc93a039); /* 52 */
-	II (a, b, c, d, 12, S41, 0x655b59c3); /* 53 */
-	II (d, a, b, c,  3, S42, 0x8f0ccc92); /* 54 */
-	II (c, d, a, b, 10, S43, 0xffeff47d); /* 55 */
-	II (b, c, d, a,  1, S44, 0x85845dd1); /* 56 */
-	II (a, b, c, d,  8, S41, 0x6fa87e4f); /* 57 */
-	II (d, a, b, c, 15, S42, 0xfe2ce6e0); /* 58 */
-	II (c, d, a, b,  6, S43, 0xa3014314); /* 59 */
-	II (b, c, d, a, 13, S44, 0x4e0811a1); /* 60 */
-	II (a, b, c, d,  4, S41, 0xf7537e82); /* 61 */
-	II (d, a, b, c, 11, S42, 0xbd3af235); /* 62 */
-	II (c, d, a, b,  2, S43, 0x2ad7d2bb); /* 63 */
-	II (b, c, d, a,  9, S44, 0xeb86d391); /* 64 */
-
-	A += a;  TRUNC32(A);
-	B += b;  TRUNC32(B);
-	C += c;  TRUNC32(C);
-	D += d;  TRUNC32(D);
-
-    } while (--blocks);
-    ctx->A = A;
-    ctx->B = B;
-    ctx->C = C;
-    ctx->D = D;
-}
-
-
-#ifdef MD5_DEBUG
-static char*
-ctx_dump(MD5_CTX* ctx)
-{
-    static char buf[1024];
-    sprintf(buf, "{A=%x,B=%x,C=%x,D=%x,%d,%d(%d)}",
-	    ctx->A, ctx->B, ctx->C, ctx->D,
-	    ctx->bytes_low, ctx->bytes_high, (ctx->bytes_low&0x3F));
-    return buf;
-}
-#endif
-
-
-static void
-MD5Update(MD5_CTX* ctx, const U8* buf, STRLEN len)
-{
-    STRLEN blocks;
-    STRLEN fill = ctx->bytes_low & 0x3F;
-
-#ifdef MD5_DEBUG  
-    static int ucount = 0;
-    fprintf(stderr,"%5i: Update(%s, %p, %d)\n", ++ucount, ctx_dump(ctx),
-	                                        buf, len);
-#endif
-
-    ctx->bytes_low += len;
-    if (ctx->bytes_low < len) /* wrap around */
-	ctx->bytes_high++;
-
-    if (fill) {
-	STRLEN missing = 64 - fill;
-	if (len < missing) {
-	    Copy(buf, ctx->buffer + fill, len, U8);
-	    return;
-	}
-	Copy(buf, ctx->buffer + fill, missing, U8);
-	MD5Transform(ctx, ctx->buffer, 1);
-	buf += missing;
-	len -= missing;
-    }
-
-    blocks = len >> 6;
-    if (blocks)
-	MD5Transform(ctx, buf, blocks);
-    if ( (len &= 0x3F)) {
-	Copy(buf + (blocks << 6), ctx->buffer, len, U8);
-    }
-}
-
-
-static void
-MD5Final(U8* digest, MD5_CTX *ctx)
-{
-    STRLEN fill = ctx->bytes_low & 0x3F;
-    STRLEN padlen = (fill < 56 ? 56 : 120) - fill;
-    U32 bits_low, bits_high;
-#ifdef MD5_DEBUG
-    fprintf(stderr,"       Final:  %s\n", ctx_dump(ctx));
-#endif
-    Copy(PADDING, ctx->buffer + fill, padlen, U8);
-    fill += padlen;
-
-    bits_low = ctx->bytes_low << 3;
-    bits_high = (ctx->bytes_high << 3) | (ctx->bytes_low  >> 29);
-#ifdef BYTESWAP
-    *(U32*)(ctx->buffer + fill) = BYTESWAP(bits_low);    fill += 4;
-    *(U32*)(ctx->buffer + fill) = BYTESWAP(bits_high);   fill += 4;
-#else
-    u2s(bits_low,  ctx->buffer + fill);   fill += 4;
-    u2s(bits_high, ctx->buffer + fill);   fill += 4;
-#endif
-
-    MD5Transform(ctx, ctx->buffer, fill >> 6);
-#ifdef MD5_DEBUG
-    fprintf(stderr,"       Result: %s\n", ctx_dump(ctx));
-#endif
-
-#ifdef BYTESWAP
-    *(U32*)digest = BYTESWAP(ctx->A);  digest += 4;
-    *(U32*)digest = BYTESWAP(ctx->B);  digest += 4;
-    *(U32*)digest = BYTESWAP(ctx->C);  digest += 4;
-    *(U32*)digest = BYTESWAP(ctx->D);
-#else
-    u2s(ctx->A, digest);
-    u2s(ctx->B, digest+4);
-    u2s(ctx->C, digest+8);
-    u2s(ctx->D, digest+12);
-#endif
-}
-
-#ifndef INT2PTR
-#define INT2PTR(any,d)	(any)(d)
-#endif
-
 static MD5_CTX* get_md5_ctx(pTHX_ SV* sv)
 {
     MAGIC *mg;
@@ -678,7 +306,7 @@ addfile(self, fh)
 	InputStream fh
     PREINIT:
 	MD5_CTX* context = get_md5_ctx(aTHX_ self);
-	STRLEN fill = context->bytes_low & 0x3F;
+	STRLEN fill = (context->count >> 3) & (MD5_BLOCK_LENGTH - 1);
 #ifdef USE_HEAP_INSTEAD_OF_STACK
 	unsigned char* buffer;
 #else
@@ -743,14 +371,12 @@ context(ctx, ...)
     PPCODE:
 	if (items > 2) {
 	    STRLEN len;
-	    unsigned long blocks = SvUV(ST(1));
+	    ctx->count = SvUV(ST(1)) << 3;
 	    unsigned char *buf = (unsigned char *)(SvPV(ST(2), len));
-	    ctx->A = buf[ 0] | (buf[ 1]<<8) | (buf[ 2]<<16) | (buf[ 3]<<24);
-	    ctx->B = buf[ 4] | (buf[ 5]<<8) | (buf[ 6]<<16) | (buf[ 7]<<24);
-	    ctx->C = buf[ 8] | (buf[ 9]<<8) | (buf[10]<<16) | (buf[11]<<24);
-	    ctx->D = buf[12] | (buf[13]<<8) | (buf[14]<<16) | (buf[15]<<24);
-	    ctx->bytes_low = blocks << 6;
-	    ctx->bytes_high = blocks >> 26;
+	    ctx->state[0] = buf[ 0] | (buf[ 1]<<8) | (buf[ 2]<<16) | (buf[ 3]<<24);
+	    ctx->state[1] = buf[ 4] | (buf[ 5]<<8) | (buf[ 6]<<16) | (buf[ 7]<<24);
+	    ctx->state[2] = buf[ 8] | (buf[ 9]<<8) | (buf[10]<<16) | (buf[11]<<24);
+	    ctx->state[3] = buf[12] | (buf[13]<<8) | (buf[14]<<16) | (buf[15]<<24);
 	    if (items == 4) {
 		buf = (unsigned char *)(SvPV(ST(3), len));
 		MD5Update(ctx, buf, len);
@@ -760,17 +386,20 @@ context(ctx, ...)
 	    XSRETURN(0);
 	}
 
-        w=ctx->A; out[ 0]=w; out[ 1]=(w>>8); out[ 2]=(w>>16); out[ 3]=(w>>24);
-        w=ctx->B; out[ 4]=w; out[ 5]=(w>>8); out[ 6]=(w>>16); out[ 7]=(w>>24);
-        w=ctx->C; out[ 8]=w; out[ 9]=(w>>8); out[10]=(w>>16); out[11]=(w>>24);
-        w=ctx->D; out[12]=w; out[13]=(w>>8); out[14]=(w>>16); out[15]=(w>>24);
+        w=ctx->state[0]; out[ 0]=w; out[ 1]=(w>>8); out[ 2]=(w>>16); out[ 3]=(w>>24);
+        w=ctx->state[1]; out[ 4]=w; out[ 5]=(w>>8); out[ 6]=(w>>16); out[ 7]=(w>>24);
+        w=ctx->state[2]; out[ 8]=w; out[ 9]=(w>>8); out[10]=(w>>16); out[11]=(w>>24);
+        w=ctx->state[3]; out[12]=w; out[13]=(w>>8); out[14]=(w>>16); out[15]=(w>>24);
 
 	EXTEND(SP, 3);
-	ST(0) = sv_2mortal(newSVuv(ctx->bytes_high << 26 |
-				   ctx->bytes_low >> 6));
+	ST(0) = sv_2mortal(newSViv((ctx->count >> 3)
+				- ((ctx->count >> 3) % MD5_BLOCK_LENGTH)));
 	ST(1) = sv_2mortal(newSVpv(out, 16));
-	ST(2) = sv_2mortal(newSVpv((char *)ctx->buffer,
-				   ctx->bytes_low & 0x3F));
+	ST(2) = sv_2mortal(newSVpv("",0));
+	if (((ctx->count >> 3) & (MD5_BLOCK_LENGTH - 1)) != 0)
+		ST(2) = sv_2mortal(newSVpv((char *)ctx->buffer,
+		                  (ctx->count >> 3) & (MD5_BLOCK_LENGTH - 1)));
+
 	XSRETURN(3);
 
 void
diff --git a/gnu/usr.bin/perl/cpan/Digest-MD5/t/files.t b/gnu/usr.bin/perl/cpan/Digest-MD5/t/files.t
index 63479c24a30..728ceb130b8 100755
--- a/gnu/usr.bin/perl/cpan/Digest-MD5/t/files.t
+++ b/gnu/usr.bin/perl/cpan/Digest-MD5/t/files.t
@@ -21,7 +21,7 @@ EOT
     # This is the output of: 'md5sum README MD5.xs rfc1321.txt'
     $EXPECT = <<EOT;
 2f93400875dbb56f36691d5f69f3eba5  README
-9572832f3628e3bebcdd54f47c43dc5a  MD5.xs
+641f5e20d5d53222c50ba99fbddabd15  MD5.xs
 754b9db19f79dbc4992f7166eb0f37ce  rfc1321.txt
 EOT
 }
diff --git a/gnu/usr.bin/perl/cpan/ExtUtils-Install/lib/ExtUtils/Install.pm b/gnu/usr.bin/perl/cpan/ExtUtils-Install/lib/ExtUtils/Install.pm
index 047c007145e..7bcd941bd2a 100644
--- a/gnu/usr.bin/perl/cpan/ExtUtils-Install/lib/ExtUtils/Install.pm
+++ b/gnu/usr.bin/perl/cpan/ExtUtils-Install/lib/ExtUtils/Install.pm
@@ -108,6 +108,7 @@ $INSTALL_QUIET = 1
       $ENV{MAKEFLAGS} =~ /\b(s|silent|quiet)\b/);
 
 my $Curdir = File::Spec->curdir;
+my $Perm_Dir = $ENV{PERL_CORE} ? 0770 : 0755;
 
 sub _estr(@) {
     return join "\n",'!' x 72,@_,'!' x 72,'';
@@ -799,7 +800,7 @@ sub install { #XXX OS-SPECIFIC
         _chdir($cwd);
     }
     foreach my $targetdir (sort keys %check_dirs) {
-        _mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
+        _mkpath( $targetdir, 0, $Perm_Dir, $verbose, $dry_run );
     }
     foreach my $found (@found_files) {
         my ($diff, $ffd, $origfile, $mode, $size, $atime, $mtime,
@@ -813,7 +814,7 @@ sub install { #XXX OS-SPECIFIC
                     $targetfile= _unlink_or_rename( $targetfile, 'tryhard', 'install' )
                         unless $dry_run;
                 } elsif ( ! -d $targetdir ) {
-                    _mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
+                    _mkpath( $targetdir, 0, $Perm_Dir, $verbose, $dry_run );
                 }
                 print "Installing $targetfile\n";
 
@@ -853,7 +854,7 @@ sub install { #XXX OS-SPECIFIC
 
     if ($pack{'write'}) {
         $dir = install_rooted_dir(dirname($pack{'write'}));
-        _mkpath( $dir, 0, 0755, $verbose, $dry_run );
+        _mkpath( $dir, 0, $Perm_Dir, $verbose, $dry_run );
         print "Writing $pack{'write'}\n" if $verbose;
         $packlist->write(install_rooted_file($pack{'write'})) unless $dry_run;
     }
@@ -1199,7 +1200,7 @@ environment variable will silence this output.
 sub pm_to_blib {
     my($fromto,$autodir,$pm_filter) = @_;
 
-    _mkpath($autodir,0,0755) if defined $autodir;
+    _mkpath($autodir,0,$Perm_Dir) if defined $autodir;
     while(my($from, $to) = each %$fromto) {
         if( -f $to && -s $from == -s $to && -M $to < -M $from ) {
             print "Skip $to (unchanged)\n" unless $INSTALL_QUIET;
@@ -1222,7 +1223,7 @@ sub pm_to_blib {
             # we wont try hard here. its too likely to mess things up.
             forceunlink($to);
         } else {
-            _mkpath(dirname($to),0,0755);
+            _mkpath(dirname($to),0,$Perm_Dir);
         }
         if ($need_filtering) {
             run_filter($pm_filter, $from, $to);
diff --git a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Any.pm b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Any.pm
index 1a3893c30b6..f0106a44c9d 100644
--- a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Any.pm
+++ b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Any.pm
@@ -1088,9 +1088,9 @@ manifypods : pure_all config $dependencies
 END
 
     my @man_cmds;
-    foreach my $section (qw(1 3)) {
-        my $pods = $self->{"MAN${section}PODS"};
-        my $p2m = sprintf <<'CMD', $section, $] > 5.008 ? " -u" : "";
+    foreach my $num (qw(1 3)) {
+        my $pods = $self->{"MAN${num}PODS"};
+        my $p2m = sprintf <<'CMD', "\$(MAN${num}SECTION)", "$]" > 5.008 ? " -u" : "";
 	$(NOECHO) $(POD2MAN) --section=%s --perm_rw=$(PERM_RW)%s
 CMD
         push @man_cmds, $self->split_command($p2m, map {($_,$pods->{$_})} sort keys %$pods);
diff --git a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm
index fe53be12efd..45ab3e85bc4 100644
--- a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm
+++ b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm
@@ -398,6 +398,7 @@ sub constants {
               INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB
               INST_MAN1DIR INST_MAN3DIR
               MAN1EXT      MAN3EXT
+              MAN1SECTION  MAN3SECTION
               INSTALLDIRS INSTALL_BASE DESTDIR PREFIX
               PERLPREFIX      SITEPREFIX      VENDORPREFIX
                    ),
@@ -1450,6 +1451,24 @@ sub init_MANPODS {
             $self->$init_method();
         }
     }
+
+    # logic similar to picking man${num}ext in perl's Configure script
+    foreach my $num (1,3) {
+        my $installdirs = uc $self->{INSTALLDIRS};
+        $installdirs = '' if $installdirs eq 'PERL';
+        my $mandir = $self->_expand_macros(
+            $self->{ "INSTALL${installdirs}MAN${num}DIR" } );
+        my $section = $num;
+
+        foreach ($num, "${num}p", "${num}pm", qw< l n o C L >, "L$num") {
+            if ( $mandir =~ /\b(?:man|cat)$_$/ ) {
+                $section = $_;
+                last;
+            }
+        }
+
+        $self->{"MAN${num}SECTION"} = $section;
+    }
 }
 
 
@@ -2134,7 +2153,8 @@ Called by init_main.  Initializes PERL_*
 sub init_PERM {
     my($self) = shift;
 
-    $self->{PERM_DIR} = 755  unless defined $self->{PERM_DIR};
+    my $perm_dir = $self->{PERL_CORE} ? 770 : 755;
+    $self->{PERM_DIR} = $perm_dir  unless defined $self->{PERM_DIR};
     $self->{PERM_RW}  = 644  unless defined $self->{PERM_RW};
     $self->{PERM_RWX} = 755  unless defined $self->{PERM_RWX};
 
diff --git a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/t/build_man.t b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/t/build_man.t
index d4649e7598c..b35c4c16bf9 100755
--- a/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/t/build_man.t
+++ b/gnu/usr.bin/perl/cpan/ExtUtils-MakeMaker/t/build_man.t
@@ -7,9 +7,10 @@ BEGIN {
 }
 
 use strict;
-use Test::More tests => 9;
+use Test::More tests => 46;
 
 use File::Spec;
+use File::Temp qw[tempdir];
 use TieOut;
 use MakeMaker::Test::Utils;
 use MakeMaker::Test::Setup::BFD;
@@ -22,29 +23,36 @@ use ExtUtils::MakeMaker::Config;
 $Config{installman3dir} = 'none';
 
 chdir 't';
+perl_lib; # sets $ENV{PERL5LIB} relative to t/
 
-perl_lib();
+my $tmpdir = tempdir( DIR => '../t', CLEANUP => 1 );
+use Cwd; my $cwd = getcwd; END { chdir $cwd } # so File::Temp can cleanup
+chdir $tmpdir;
 
 ok( setup_recurs(), 'setup' );
 END {
-    ok( chdir File::Spec->updir );
-    ok( teardown_recurs(), 'teardown' );
+    ok chdir File::Spec->updir, 'chdir updir';
+    ok teardown_recurs(), 'teardown';
 }
 
 ok( chdir 'Big-Dummy', "chdir'd to Big-Dummy" ) ||
   diag("chdir failed: $!");
+my $README = 'README.pod';
+{ open my $fh, '>', $README or die "$README: $!"; }
 
-ok( my $stdout = tie *STDOUT, 'TieOut' );
+ok((my $stdout = tie *STDOUT, 'TieOut'), 'tie stdout');
 
 {
     local $Config{installman3dir} = File::Spec->catdir(qw(t lib));
-
     my $mm = WriteMakefile(
         NAME            => 'Big::Dummy',
         VERSION_FROM    => 'lib/Big/Dummy.pm',
     );
-
-    ok( keys %{ $mm->{MAN3PODS} } );
+    my %got = %{ $mm->{MAN3PODS} };
+    # because value too OS-specific
+    my $delete_key = $^O eq 'VMS' ? '[.lib.Big]Dummy.pm' : 'lib/Big/Dummy.pm';
+    ok delete($got{$delete_key}), 'normal man3pod';
+    is_deeply \%got, {}, 'no extra man3pod';
 }
 
 {
@@ -53,28 +61,126 @@ ok( my $stdout = tie *STDOUT, 'TieOut' );
         VERSION_FROM    => 'lib/Big/Dummy.pm',
         INSTALLMAN3DIR  => 'none'
     );
-
-    is_deeply( $mm->{MAN3PODS}, {} );
+    is_deeply $mm->{MAN3PODS}, {}, 'suppress man3pod with "none"';
 }
 
-
 {
     my $mm = WriteMakefile(
         NAME            => 'Big::Dummy',
         VERSION_FROM    => 'lib/Big/Dummy.pm',
         MAN3PODS        => {}
     );
-
-    is_deeply( $mm->{MAN3PODS}, { } );
+    is_deeply $mm->{MAN3PODS}, {}, 'suppress man3pod with {}';
 }
 
-
 {
     my $mm = WriteMakefile(
         NAME            => 'Big::Dummy',
         VERSION_FROM    => 'lib/Big/Dummy.pm',
         MAN3PODS        => { "Foo.pm" => "Foo.1" }
     );
+    is_deeply $mm->{MAN3PODS}, { "Foo.pm" => "Foo.1" }, 'override man3pod';
+}
+
+unlink $README;
 
-    is_deeply( $mm->{MAN3PODS}, { "Foo.pm" => "Foo.1" } );
+# Check that we find the manage section from the directory
+{
+    local $Config{installman1dir}       = '';
+    local $Config{installman3dir}       = '';
+    local $Config{installsiteman1dir}   = '';
+    local $Config{installsiteman3dir}   = '';
+    local $Config{installvendorman1dir} = '';
+    local $Config{installvendorman3dir} = '';
+    local $Config{usevendorprefix}      = '';
+    local $Config{vendorprefixexp}      = '';
+
+    my $INSTALLDIRS = 'site';
+
+    my $sections_ok = sub {
+        my ( $man1section, $man3section, $m ) = @_;
+        local $Test::Builder::Level = $Test::Builder::Level + 1;
+
+        my $stdout = tie *STDOUT, 'TieOut' or die;
+        my $mm     = WriteMakefile(
+            NAME         => 'Big::Dummy',
+            VERSION_FROM => 'lib/Big/Dummy.pm',
+            INSTALLDIRS  => $INSTALLDIRS,
+        );
+
+        is( $mm->{MAN1SECTION}, $man1section,
+            "$m man1section is $man1section" );
+        is( $mm->{MAN3SECTION}, $man3section,
+            "$m man3section is $man3section" );
+    };
+
+    # Correctly detect known man sections
+    foreach my $s ( '{num}', '{num}p', '{num}pm', qw< l n o C L >, "L{num}", )
+    {
+        ( my $man1section = $s ) =~ s/\{num\}/1/;
+        ( my $man3section = $s ) =~ s/\{num\}/3/;
+
+        $Config{installman1dir}
+            = File::Spec->catdir( 'foo', "man$man1section" );
+        $Config{installman3dir}
+            = File::Spec->catdir( 'foo', "man$man3section" );
+
+        $sections_ok->( $man1section, $man3section, "From main [$s]" );
+    }
+
+    # Ignore unknown man sections
+    foreach my $s ( '', qw< 2 2p 33 >, "C{num}" ) {
+        ( my $man1section = $s ) =~ s/\{num\}/1/;
+        ( my $man3section = $s ) =~ s/\{num\}/3/;
+
+        $Config{installman1dir}
+            = File::Spec->catdir( 'foo', "man$man1section" );
+        $Config{installman3dir}
+            = File::Spec->catdir( 'foo', "man$man3section" );
+
+        $sections_ok->( 1, 3, "Ignore unrecognized [$s]" );
+    }
+
+    # Look in the right installman?dir based on INSTALLDIRS
+    {
+        $Config{installman1dir}     = File::Spec->catdir( 'foo', 'cat1p' );
+        $Config{installman3dir}     = File::Spec->catdir( 'foo', 'cat3p' );
+        $Config{installsiteman1dir} = File::Spec->catdir( 'foo', 'catL' );
+        $Config{installsiteman3dir} = File::Spec->catdir( 'foo', 'catL3' );
+
+        $sections_ok->( 'L', 'L3', "From site" );
+
+        my $installwas = $INSTALLDIRS;
+        $INSTALLDIRS = 'perl';
+        $sections_ok->( '1p', '3p', "From main" );
+        $INSTALLDIRS = $installwas;
+
+    }
+
+    # Set MAN?SECTION in Makefile
+    {
+        $Config{installman1dir} = File::Spec->catdir( 'foo', 'man1pm' );
+        $Config{installman3dir} = File::Spec->catdir( 'foo', 'man3pm' );
+        $Config{installsiteman1dir} = '';
+        $Config{installsiteman3dir} = '';
+
+        my $stdout = tie *STDOUT, 'TieOut' or die;
+        my $mm     = WriteMakefile(
+            NAME         => 'Big::Dummy',
+            VERSION_FROM => 'lib/Big/Dummy.pm',
+            MAN1PODS     => { foo => 'foo.1' },
+            INSTALLDIRS  => $INSTALLDIRS,
+        );
+
+        my $makefile = slurp('Makefile');
+
+        like $makefile, qr/^\QMAN1SECTION = 1pm\E$/xms, "Set MAN1SECTION";
+        like $makefile, qr/^\QMAN3SECTION = 3pm\E$/xms, "Set MAN3SECTION";
+
+        like $makefile, qr/\Q$(POD2MAN) --section=$(MAN1SECTION) \E/,
+            "Set POD2MAN section to \$(MAN1SECTION)";
+        like $makefile, qr/\Q$(POD2MAN) --section=$(MAN3SECTION) \E/,
+            "Set POD2MAN section to \$(MAN3SECTION)";
+    }
 }
+
diff --git a/gnu/usr.bin/perl/cpan/IO-Compress/private/MakeUtil.pm b/gnu/usr.bin/perl/cpan/IO-Compress/private/MakeUtil.pm
index 12fa26fd05f..037782b9498 100644
--- a/gnu/usr.bin/perl/cpan/IO-Compress/private/MakeUtil.pm
+++ b/gnu/usr.bin/perl/cpan/IO-Compress/private/MakeUtil.pm
@@ -35,7 +35,8 @@ sub MY::libscan
     my $path = shift;
 
     return undef
-        if $path =~ /(~|\.bak|_bak)$/ ||
+        if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+           $path =~ /(~|\.bak|_bak)$/ ||
            $path =~ /\..*\.sw(o|p)$/  ||
            $path =~ /\B\.svn\b/;
 
diff --git a/gnu/usr.bin/perl/cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm b/gnu/usr.bin/perl/cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm
index 67ad847393b..6512423c12e 100644
--- a/gnu/usr.bin/perl/cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm
+++ b/gnu/usr.bin/perl/cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm
@@ -1,4 +1,4 @@
-#	$OpenBSD: Pledge.pm,v 1.4 2019/07/24 22:22:59 afresh1 Exp $	#
+#	$OpenBSD: Pledge.pm,v 1.5 2019/12/30 02:15:17 afresh1 Exp $	#
 package OpenBSD::Pledge;
 
 use 5.020002;
diff --git a/gnu/usr.bin/perl/cpan/Pod-Parser/lib/Pod/PlainText.pm b/gnu/usr.bin/perl/cpan/Pod-Parser/lib/Pod/PlainText.pm
index 3db4d903cd6..03252e93c71 100644
--- a/gnu/usr.bin/perl/cpan/Pod-Parser/lib/Pod/PlainText.pm
+++ b/gnu/usr.bin/perl/cpan/Pod-Parser/lib/Pod/PlainText.pm
@@ -139,6 +139,19 @@ sub initialize {
     return $self->SUPER::initialize;
 }
 
+# pod2text and pod2man re-use the same parser on a list of files,
+# and will lose some information if some intermediate documents produce
+# unbalanced calls to begin_cmd/end_cmd.
+# via r1.4 of OpenBSD src/gnu/usr.bin/perl/lib/Pod/PlainText.pm
+sub begin_pod {
+    my $self = shift;
+
+    $$self{VERBATIM} = 0;
+    $$self{EXCLUDE}  = 0;
+
+    return $self->SUPER::begin_pod(@_);
+}
+
 
 ############################################################################
 # Core overrides
diff --git a/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc.pm b/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc.pm
index bb6ffc83efb..42ed4b49d54 100644
--- a/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc.pm
+++ b/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc.pm
@@ -486,6 +486,8 @@ sub init_formatter_class_list {
 
   $self->opt_M_with('Pod::Perldoc::ToPod');   # the always-there fallthru
   $self->opt_o_with('text');
+  $self->opt_o_with('man')
+    if $ENV{TERM} && $ENV{TERM} !~ /dumb|emacs|none|unknown/i;
 
   return;
 }
diff --git a/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc/ToMan.pm b/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc/ToMan.pm
index bfcb5c40ee6..d8e42b1703b 100644
--- a/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc/ToMan.pm
+++ b/gnu/usr.bin/perl/cpan/Pod-Perldoc/lib/Pod/Perldoc/ToMan.pm
@@ -144,7 +144,9 @@ sub _get_podman_switches {
     #
     # See RT #77465
     #
-    #push @switches, 'utf8' => 1;
+    # Then again, do *not* comment it out on OpenBSD:
+    # mandoc handles UTF-8 input just fine.
+    push @switches, 'utf8' => 1;
 
 	$self->debug( "Pod::Man switches are [@switches]\n" );
 
@@ -209,12 +211,6 @@ sub _have_groff_with_utf8 {
 	$version ge $minimum_groff_version;
 	}
 
-sub _have_mandoc_with_utf8 {
-	my( $self ) = @_;
-
-       $self->_is_mandoc and not system 'mandoc -Tlocale -V > /dev/null 2>&1';
-	}
-
 sub _collect_nroff_switches {
 	my( $self ) = shift;
 
@@ -227,6 +223,10 @@ sub _collect_nroff_switches {
 		push @render_switches, '-rLL=' . (int $c) . 'n' if $cols > 80;
 		}
 
+	if( $self->_is_mandoc ) {
+		push @render_switches, '-Owidth=' . $self->_get_columns;
+		}
+
 	# I hear persistent reports that adding a -c switch to $render
 	# solves many people's problems.  But I also hear that some mans
 	# don't have a -c switch, so that unconditionally adding it here
@@ -242,7 +242,6 @@ sub _get_device_switches {
 	   if( $self->_is_nroff  )             { qw()              }
 	elsif( $self->_have_groff_with_utf8 )  { qw(-Kutf8 -Tutf8) }
 	elsif( $self->_is_ebcdic )             { qw(-Tcp1047)      }
-	elsif( $self->_have_mandoc_with_utf8 ) { qw(-Tlocale)      }
 	elsif( $self->_is_mandoc )             { qw()              }
 	else                                   { qw(-Tlatin1)      }
 	}
@@ -358,6 +357,9 @@ sub _filter_through_nroff {
 		length $done
 		);
 
+	# wait for it to exit
+	waitpid( $pid, 0 );
+
 	if( $? ) {
 		$self->warn( "Error from pipe to $render!\n" );
 		$self->debug( 'Error: ' . do { local $/; <$err> } );
diff --git a/gnu/usr.bin/perl/cpan/Sys-Syslog/Makefile.PL b/gnu/usr.bin/perl/cpan/Sys-Syslog/Makefile.PL
index d09ba69fc90..c76963d0b96 100644
--- a/gnu/usr.bin/perl/cpan/Sys-Syslog/Makefile.PL
+++ b/gnu/usr.bin/perl/cpan/Sys-Syslog/Makefile.PL
@@ -14,7 +14,7 @@ if ($] < 5.008) {
 }
 
 # create a lib/ dir in order to avoid warnings in Test::Distribution
-mkdir "lib", 0755;
+mkdir "lib", $ENV{PERL_CORE} ? 0770 : 0755;
 
 # virtual paths given to EU::MM
 my %virtual_path = ( 'Syslog.pm' => '$(INST_LIBDIR)/Syslog.pm' );
diff --git a/gnu/usr.bin/perl/cpan/Text-Balanced/lib/Text/Balanced.pm b/gnu/usr.bin/perl/cpan/Text-Balanced/lib/Text/Balanced.pm
index f1a5780a0b9..4fbb1bc6315 100644
--- a/gnu/usr.bin/perl/cpan/Text-Balanced/lib/Text/Balanced.pm
+++ b/gnu/usr.bin/perl/cpan/Text-Balanced/lib/Text/Balanced.pm
@@ -1508,7 +1508,7 @@ C<extract_tagged> returns the complete text up to the point of failure.
 If the string is "PARA", C<extract_tagged> returns only the first paragraph
 after the tag (up to the first line that is either empty or contains
 only whitespace characters).
-If the string is "", the the default behaviour (i.e. failure) is reinstated.
+If the string is "", the default behaviour (i.e. failure) is reinstated.
 
 For example, suppose the start tag "/para" introduces a paragraph, which then
 continues until the next "/endpara" tag or until another "/para" tag is
diff --git a/gnu/usr.bin/perl/cpan/podlators/lib/Pod/Man.pm b/gnu/usr.bin/perl/cpan/podlators/lib/Pod/Man.pm
index 6ebab1e0e5c..71798c2533e 100644
--- a/gnu/usr.bin/perl/cpan/podlators/lib/Pod/Man.pm
+++ b/gnu/usr.bin/perl/cpan/podlators/lib/Pod/Man.pm
@@ -903,6 +903,8 @@ sub devise_title {
                     $cut = $i + 1;
                     $cut++ if ($dirs[$i + 1] && $dirs[$i + 1] eq 'lib');
                     last;
+                } elsif ($dirs[$i] eq 'lib' && $dirs[$i + 1] && $dirs[0] eq 'ext') {
+                    $cut = $i + 1;
                 }
             }
             if ($cut > 0) {
diff --git a/gnu/usr.bin/perl/cpan/podlators/scripts/pod2man.PL b/gnu/usr.bin/perl/cpan/podlators/scripts/pod2man.PL
index bc455d88291..cc6f955350d 100644
--- a/gnu/usr.bin/perl/cpan/podlators/scripts/pod2man.PL
+++ b/gnu/usr.bin/perl/cpan/podlators/scripts/pod2man.PL
@@ -71,12 +71,13 @@ my $stdin;
 # Parse our options, trying to retain backward compatibility with pod2man but
 # allowing short forms as well.  --lax is currently ignored.
 my %options;
+$options{utf8} = 1;
 Getopt::Long::config ('bundling_override');
 GetOptions (\%options, 'center|c=s', 'date|d=s', 'errors=s', 'fixed=s',
             'fixedbold=s', 'fixeditalic=s', 'fixedbolditalic=s', 'help|h',
             'lax|l', 'lquote=s', 'name|n=s', 'nourls', 'official|o',
             'quotes|q=s', 'release|r=s', 'rquote=s', 'section|s=s', 'stderr',
-            'verbose|v', 'utf8|u')
+            'verbose|v', 'utf8|u!')
     or exit 1;
 pod2usage (0) if $options{help};
 
@@ -126,7 +127,7 @@ exit $status;
 __END__
 
 =for stopwords
-en em --stderr stderr --utf8 UTF-8 overdo markup MT-LEVEL Allbery Solaris URL
+en em --stderr stderr --no-utf8 UTF-8 overdo markup MT-LEVEL Allbery Solaris URL
 troff troff-specific formatters uppercased Christiansen --nourls UTC prepend
 lquote rquote
 
@@ -141,7 +142,7 @@ pod2man [B<--center>=I<string>] [B<--date>=I<string>] [B<--errors>=I<style>]
     [B<--fixedbolditalic>=I<font>] [B<--name>=I<name>] [B<--nourls>]
     [B<--official>] [B<--release>=I<version>] [B<--section>=I<manext>]
     [B<--quotes>=I<quotes>] [B<--lquote>=I<quote>] [B<--rquote>=I<quote>]
-    [B<--stderr>] [B<--utf8>] [B<--verbose>] [I<input> [I<output>] ...]
+    [B<--stderr>] [B<--no-utf8>] [B<--verbose>] [I<input> [I<output>] ...]
 
 pod2man B<--help>
 
@@ -344,19 +345,10 @@ to C<--errors=stderr> and is supported for backward compatibility.
 
 =item B<-u>, B<--utf8>
 
-By default, B<pod2man> produces the most conservative possible *roff
-output to try to ensure that it will work with as many different *roff
-implementations as possible.  Many *roff implementations cannot handle
-non-ASCII characters, so this means all non-ASCII characters are converted
-either to a *roff escape sequence that tries to create a properly accented
-character (at least for troff output) or to C<X>.
-
-This option says to instead output literal UTF-8 characters.  If your
-*roff implementation can handle it, this is the best output format to use
-and avoids corruption of documents containing non-ASCII characters.
-However, be warned that *roff source with literal UTF-8 characters is not
-supported by many implementations and may even result in segfaults and
-other bad behavior.
+This option allows B<pod2man> to output literal UTF-8 characters.
+On OpenBSD, it is enabled by default and can be disabled with
+B<--no-utf8>, in which case non-ASCII characters are converted
+either to *roff escape sequences or to C<X>.
 
 Be aware that, when using this option, the input encoding of your POD
 source should be properly declared unless it's US-ASCII.  Pod::Simple will
diff --git a/gnu/usr.bin/perl/dist/IO/t/cachepropagate-unix.t b/gnu/usr.bin/perl/dist/IO/t/cachepropagate-unix.t
index e3e438ea1ca..d1ba4880d23 100644
--- a/gnu/usr.bin/perl/dist/IO/t/cachepropagate-unix.t
+++ b/gnu/usr.bin/perl/dist/IO/t/cachepropagate-unix.t
@@ -14,10 +14,25 @@ use Test::More;
 plan skip_all => "UNIX domain sockets not implemented on $^O"
   if ($^O =~ m/^(?:qnx|nto|vos|MSWin32|VMS)$/);
 
-plan tests => 15;
-
 my $socketpath = catfile(tempdir( CLEANUP => 1 ), 'testsock');
 
+# check the socketpath fits in sun_path.
+#
+# pack_sockaddr_un() just truncates the path, this may change, but how
+# it will handle such a condition is undetermined (and we might need
+# to work with older versions of Socket outside of a perl build)
+# https://rt.cpan.org/Ticket/Display.html?id=116819
+
+my $name = eval { pack_sockaddr_un($socketpath) };
+if (defined $name) {
+    my ($packed_name) = eval { unpack_sockaddr_un($name) };
+    if (!defined $packed_name || $packed_name ne $socketpath) {
+        plan skip_all => "socketpath too long for sockaddr_un";
+    }
+}
+
+plan tests => 15;
+
 # start testing stream sockets:
 my $listener = IO::Socket::UNIX->new(Type => SOCK_STREAM,
 				     Listen => 1,
@@ -88,6 +103,8 @@ SKIP: {
       skip "no Socket::SO_PROTOCOL", 1 if !defined(eval { Socket::SO_PROTOCOL });
       skip "SO_PROTOCOL defined but not implemented", 1
          if !defined $new->sockopt(Socket::SO_PROTOCOL);
+      skip "SO_PROTOCOL returns chosen protocol on OpenBSD"
+         if $^O eq 'openbsd';
       is($new->protocol(), $p, 'protocol match');
     }
     SKIP: {
diff --git a/gnu/usr.bin/perl/dist/threads-shared/t/stress.t b/gnu/usr.bin/perl/dist/threads-shared/t/stress.t
index 1dd95e39595..e3c1441288e 100755
--- a/gnu/usr.bin/perl/dist/threads-shared/t/stress.t
+++ b/gnu/usr.bin/perl/dist/threads-shared/t/stress.t
@@ -83,7 +83,7 @@ use threads::shared;
         print "# Looping for $busycount iterations should take about 0.025s\n";
     }
 
-    my $TIMEOUT = 60;
+    my $TIMEOUT = 600;
 
     my $mutex = 1;
     share($mutex);
diff --git a/gnu/usr.bin/perl/ext/DynaLoader/Makefile.PL b/gnu/usr.bin/perl/ext/DynaLoader/Makefile.PL
index 864af3ed8e2..81bd54665a7 100644
--- a/gnu/usr.bin/perl/ext/DynaLoader/Makefile.PL
+++ b/gnu/usr.bin/perl/ext/DynaLoader/Makefile.PL
@@ -65,8 +65,8 @@ sub MY::static {
 
     return "
 $object : \$(FIRST_MAKEFILE) \$(OBJECT)
-	\$(RM_RF) $object
-	\$(CP) \$(OBJECT) $object
+	#\$(RM_RF) $object
+	#\$(CP) \$(OBJECT) $object
 
 static :: $object
 ";
diff --git a/gnu/usr.bin/perl/ext/NDBM_File/Makefile.PL b/gnu/usr.bin/perl/ext/NDBM_File/Makefile.PL
index fe2cb407f57..539a377488f 100644
--- a/gnu/usr.bin/perl/ext/NDBM_File/Makefile.PL
+++ b/gnu/usr.bin/perl/ext/NDBM_File/Makefile.PL
@@ -1,7 +1,7 @@
 use ExtUtils::MakeMaker;
 WriteMakefile(
     NAME	=> 'NDBM_File',
-    LIBS => ["-L/usr/local/lib -lndbm", "-ldbm -lucb"],
+    #LIBS => ["-L/usr/local/lib -lndbm", "-ldbm -lucb"],
     XSPROTOARG => '-noprototypes', 		# XXX remove later?
     VERSION_FROM => 'NDBM_File.pm',
 );
diff --git a/gnu/usr.bin/perl/hints/openbsd.sh b/gnu/usr.bin/perl/hints/openbsd.sh
index 66db8e2ce1e..0b165077739 100644
--- a/gnu/usr.bin/perl/hints/openbsd.sh
+++ b/gnu/usr.bin/perl/hints/openbsd.sh
@@ -84,6 +84,8 @@ esac
 # around for old NetBSD binaries.
 libswanted=`echo $libswanted | sed 's/ crypt / /'`
 
+libswanted=`echo $libswanted | sed 's/ util / /'`
+
 # Configure can't figure this out non-interactively
 d_suidsafe=$define
 
@@ -101,6 +103,13 @@ m88k-3.4)
    ;;
 esac
 
+# Special per-arch specific ccflags
+case "${ARCH}-${osvers}" in
+    vax-*)
+    ccflags="-DUSE_PERL_ATOF=0 $ccflags"
+    ;;
+esac
+
 # This script UU/usethreads.cbu will get 'called-back' by Configure 
 # after it has prompted the user for whether to use threads.
 cat > UU/usethreads.cbu <<'EOCBU'
@@ -122,6 +131,9 @@ $define|true|[yY]*)
         	# Broken up to OpenBSD 3.6, fixed in OpenBSD 3.7
 		d_getservbyname_r=$undef ;;
 	esac
+	;;
+*)
+	libswanted=`echo $libswanted | sed 's/ pthread / /'`
 esac
 EOCBU
 
@@ -140,12 +152,12 @@ case "$openbsd_distribution" in
 	siteprefix='/usr/local'
 	siteprefixexp='/usr/local'
 	# Ports installs non-std libs in /usr/local/lib so look there too
-	locincpth='/usr/local/include'
-	loclibpth='/usr/local/lib'
+	locincpth=''
+	loclibpth=''
 	# Link perl with shared libperl
-	if [ "$usedl" = "$define" -a -r shlib_version ]; then
+	if [ "$usedl" = "$define" -a -r $src/shlib_version ]; then
 		useshrplib=true
-		libperl=`. ./shlib_version; echo libperl.so.${major}.${minor}`
+		libperl=`. $src/shlib_version; echo libperl.so.${major}.${minor}`
 	fi
 	;;
 esac
diff --git a/gnu/usr.bin/perl/install_lib.pl b/gnu/usr.bin/perl/install_lib.pl
index ac17bd81d81..8ca801b00a6 100644
--- a/gnu/usr.bin/perl/install_lib.pl
+++ b/gnu/usr.bin/perl/install_lib.pl
@@ -6,7 +6,7 @@
 use strict;
 use vars qw($Is_VMS $Is_W32 $Is_OS2 $Is_Cygwin $Is_Darwin $Is_NetWare $Is_AmigaOS
 	    %opts $packlist);
-use subs qw(unlink link chmod);
+use subs qw(unlink link chmod chown);
 require File::Path;
 require File::Copy;
 
@@ -99,6 +99,9 @@ sub link {
 		unless -f $to and (chmod(0666, $to), unlink $to)
 			and File::Copy::copy($from, $to) and ++$success;
 	}
+	if (defined($opts{uid}) || defined($opts{gid})) {
+	    chown($opts{uid}, $opts{gid}, $to) if $success;
+	}
 	$packlist->{$xto} = { type => 'file' };
     }
     $success;
@@ -114,6 +117,16 @@ sub chmod {
       unless $opts{notify};
 }
 
+sub chown {
+    my($uid,$gid,$name) = @_;
+
+    return if ($^O eq 'dos');
+    printf "  chown %s:%s %s\n", $uid, $gid, $name if $opts{verbose};
+    CORE::chown($uid,$gid,$name)
+	|| warn sprintf("Couldn't chown %s:%s %s: $!\n", $uid, $gid, $name)
+      unless $opts{notify};
+}
+
 sub samepath {
     my($p1, $p2) = @_;
 
@@ -145,7 +158,8 @@ sub safe_rename {
 }
 
 sub mkpath {
-    File::Path::mkpath(shift , $opts{verbose}, 0777) unless $opts{notify};
+    File::Path::make_path(shift, {owner=>$opts{uid}, group=>$opts{gid},
+        mode=>0777, verbose=>$opts{verbose}}) unless $opts{notify};
 }
 
 sub unixtoamiga
diff --git a/gnu/usr.bin/perl/installperl b/gnu/usr.bin/perl/installperl
index 6cd65a09238..1ca3b992623 100644
--- a/gnu/usr.bin/perl/installperl
+++ b/gnu/usr.bin/perl/installperl
@@ -77,8 +77,8 @@ $opts{destdir} = '';
     my $usage = 0;
     if (!GetOptions(\%opts, 'notify|n', 'strip|s', 'silent|S',
                     'skip-otherperls|o', 'force|f', 'verbose|V', 'archname|A',
-                    'netware', 'nopods|p', 'destdir:s', 'help|h|?',
-                    'versiononly|v' => \$versiononly, '<>' => sub {
+                    'netware', 'nopods|p', 'destdir:s', 'help|h|?', 'user|u:s',
+		    'group|g:s', 'versiononly|v' => \$versiononly, '<>' => sub {
                         if ($_[0] eq '+v') {
                             $versiononly = 0;
                         } else {
@@ -107,6 +107,8 @@ Usage $0: [switches]
   -A        Also install perl with the architecture's name in the perl binary's
             name.
   -p        Don't install the pod files. [This will break use diagnostics;]
+  -g group  install files with the specified group
+  -u user   install files with the specified user 
   -netware  Install correctly on a Netware server.
   -destdir  Prefix installation directories by this string.
   -h        Display this help message.
@@ -114,6 +116,8 @@ EOT
         exit $usage;
     }
 }
+$opts{'uid'} = getpwnam($opts{'user'}) if exists($opts{'user'});
+$opts{'gid'} = getgrnam($opts{'group'}) if exists($opts{'group'});
 
 $versiononly = 1 if $Config{versiononly} && !defined $versiononly;
 my (@scripts, @tolink);
@@ -153,7 +157,7 @@ if ((-e "testcompile") && (defined($ENV{'COMPILE'}))) {
 }
 
 # Exclude nonxs extensions that are not architecture dependent
-my @nonxs = grep(!/^Errno$/, split(' ', $Config{'nonxs_ext'}));
+my @nonxs = grep(!/^(Errno|IO\/Compress)$/, split(' ', $Config{'nonxs_ext'}));
 
 my @ext_dirs = qw(cpan dist ext);
 foreach my $ext_dir (@ext_dirs) {
@@ -199,7 +203,7 @@ my $installprivlib = "$opts{destdir}$Config{installprivlib}";
 my $installarchlib = "$opts{destdir}$Config{installarchlib}";
 my $installsitelib = "$opts{destdir}$Config{installsitelib}";
 my $installsitearch = "$opts{destdir}$Config{installsitearch}";
-my $installman1dir = "$opts{destdir}$Config{installman1dir}";
+my $installman1dir = "none";
 my $man1ext = $Config{man1ext};
 my $libperl = $Config{libperl};
 # Shared library and dynamic loading suffixes.
@@ -239,8 +243,6 @@ if ($Is_VMS) {  # Hang in there until File::Spec hits the big time
    $installbin		|| die "No installbin directory in config.sh\n";
 -d $installbin	        || mkpath($installbin);
 -d $installbin		|| $opts{notify} || die "$installbin is not a directory\n";
--w $installbin		|| $opts{notify} || die "$installbin is not writable by you\n"
-	unless $installbin =~ m#^/afs/# || $opts{notify};
 
 if (!$Is_NetWare) {
 if (!$Is_VMS) {
@@ -253,9 +255,9 @@ else {
     }
 }
 
--f 't/rantests'		|| $Is_W32
-			|| warn "WARNING: You've never run 'make test' or",
-				" some tests failed! (Installing anyway.)\n";
+#-f 't/rantests'		|| $Is_W32
+#			|| warn "WARNING: You've never run 'make test' or",
+#				" some tests failed! (Installing anyway.)\n";
 } #if (!$Is_NetWare)
 
 # This will be used to store the packlist
@@ -281,6 +283,10 @@ if (($Is_W32 and ! $Is_NetWare) or $Is_Cygwin) {
     $packlist->{"$Config{installbin}/$perldll"} = { type => 'file' };
 } # if (($Is_W32 and ! $Is_NetWare) or $Is_Cygwin)
 
+# Get the install command and flags from the environment
+my @installcmd = $ENV{"INSTALL"} || "install";
+push(@installcmd, $ENV{"INSTALL_COPY"} || "-c");
+
 # First we install the version-numbered executables.
 
 if ($Is_VMS) {
@@ -301,11 +307,8 @@ if ($Is_VMS) {
 }
 elsif ($^O ne 'dos') {
     if (!$Is_NetWare) {
-	safe_unlink("$installbin/$perl_verbase$ver$exe_ext");
-	copy("perl$exe_ext", "$installbin/$perl_verbase$ver$exe_ext");
-	strip("$installbin/$perl_verbase$ver$exe_ext");
-	fix_dep_names("$installbin/$perl_verbase$ver$exe_ext");
-	chmod(0755, "$installbin/$perl_verbase$ver$exe_ext");
+	my $ver = ''; # don't install a versioned perl binary
+	install("perl$exe_ext", "$installbin/$perl_verbase$ver$exe_ext", "0755");
     }
     else {
 	# If installing onto a NetWare server
@@ -378,7 +381,9 @@ elsif ($Is_Cygwin) { # On Cygwin symlink it to CORE to make Makefile happy
     @corefiles = <*.h>;
 } else {
     # [als] hard-coded 'libperl' name... not good!
-    @corefiles = <*.h libperl*.* perl*$Config{lib_ext}>;
+    #@corefiles = <*.h libperl*.* perl*$Config{lib_ext}>;
+    @corefiles = <*.h *.inc perl*$Config{lib_ext}>;
+    push(@corefiles,<libperl*.*>) unless defined($ENV{"NOLIBINSTALL"});
 
     # AIX needs perl.exp installed as well.
     push(@corefiles,'perl.exp') if $^O eq 'aix';
@@ -407,7 +412,8 @@ if ($Is_W32) { #linking lib isn't made in root but in CORE on Win32
 # Install main perl executables
 # Make links to ordinary names if installbin directory isn't current directory.
 
-if (! $versiononly && ! samepath($installbin, '.') && ($^O ne 'dos') && ! $Is_VMS && ! $Is_NetWare) {
+if (0) { # don't install a versioned perl binary
+#if (! $versiononly && ! samepath($installbin, '.') && ($^O ne 'dos') && ! $Is_VMS && ! $Is_NetWare) {
     safe_unlink("$installbin/$perl$exe_ext", "$installbin/suid$perl$exe_ext");
     if ($^O eq 'vos') {
 	# VOS doesn't support hard links, so use a symlink.
@@ -545,6 +551,9 @@ if (!$opts{nopods} && (!$versiononly || ($installprivlib =~ m/\Q$vershort/))) {
 
 
 $packlist->write() unless $opts{notify};
+if (defined($opts{uid}) || defined($opts{gid})) {
+    chown($opts{uid}, $opts{gid}, $packlist->packlist_file());
+}
 print "  Installation complete\n" if $opts{verbose};
 
 exit 0;
@@ -583,6 +592,7 @@ sub safe_unlink {
 
 sub copy {
     my($from,$to) = @_;
+    my($success) = 0;
 
     my $xto = $to;
     $xto =~ s/^\Q$opts{destdir}\E//;
@@ -590,12 +600,32 @@ sub copy {
 	unless $opts{silent};
     print "  creating new version of $xto\n"
 	if $Is_VMS and -e $to and !$opts{silent};
-    unless ($opts{notify} or File::Copy::copy($from, $to)) {
+    unless ($opts{notify} or File::Copy::copy($from, $to) and ++$success) {
 	# Might have been that F::C::c can't overwrite the target
 	warn "Couldn't copy $from to $to: $!\n"
 	    unless -f $to and (chmod(0666, $to), unlink $to)
-		   and File::Copy::copy($from, $to);
+		   and File::Copy::copy($from, $to) and ++$success;
     }
+    if (defined($opts{uid}) || defined($opts{gid})) {
+	chown($opts{uid}, $opts{gid}, $to) if $success;
+    }
+    $packlist->{$xto} = { type => 'file' };
+}
+
+sub install {
+    my($from,$to,$mode) = @_;
+
+    my $xto = $to;
+    my $cmd = join(' ', @installcmd);
+    $cmd .= " -m $mode" if $mode;
+    $cmd .= " -o $opts{uid}" if defined($opts{uid});
+    $cmd .= " -g $opts{gid}" if defined($opts{gid});
+    $cmd .= " -s" if $opts{strip};
+    $cmd .= " $from $to";
+    $xto =~ s/^\Q$opts{destdir}\E// if $opts{destdir};
+    print $opts{verbose} ? "  install $from $xto\n" : "  $xto\n" unless $opts{silent};
+    system($cmd);
+    warn "Couldn't $cmd\n" if $?;
     $packlist->{$xto} = { type => 'file' };
 }
 
@@ -627,6 +657,10 @@ sub installlib {
 	return;
     }
 
+    # If we have different install version, install that instead
+    return if -e "$_.install";
+    $name =~ s/\.install$//;
+
     # ignore patch backups, RCS files, emacs backup & temp files and the
     # .exists files, .PL files, and test files.
     return if $name =~ m{\.orig$|\.rej$|~$|^#.+#$|,v$|^\.exists|\.PL$|\.plc$|\.t$|^test\.pl$|^dbm_filter_util\.pl$|^filter-util\.pl$|^uupacktool\.pl$|^\.gitignore$} ||
diff --git a/gnu/usr.bin/perl/lib/AnyDBM_File.pm b/gnu/usr.bin/perl/lib/AnyDBM_File.pm
index 4153af2de2d..3b41a4a100b 100644
--- a/gnu/usr.bin/perl/lib/AnyDBM_File.pm
+++ b/gnu/usr.bin/perl/lib/AnyDBM_File.pm
@@ -22,8 +22,6 @@ __END__
 
 AnyDBM_File - provide framework for multiple DBMs
 
-NDBM_File, DB_File, GDBM_File, SDBM_File, ODBM_File - various DBM implementations
-
 =head1 SYNOPSIS
 
     use AnyDBM_File;
diff --git a/gnu/usr.bin/perl/perl.c b/gnu/usr.bin/perl/perl.c
index f2de4795cb3..b125056a4c3 100644
--- a/gnu/usr.bin/perl/perl.c
+++ b/gnu/usr.bin/perl/perl.c
@@ -2019,6 +2019,8 @@ S_Internals_V(pTHX_ CV *cv)
 #  endif
 #endif
 
+#undef PERL_BUILD_DATE
+
 #ifdef PERL_BUILD_DATE
     PUSHs(Perl_newSVpvn_flags(aTHX_
 			      STR_WITH_LEN("Compiled at " PERL_BUILD_DATE),
diff --git a/gnu/usr.bin/perl/pod/perlmodinstall.pod b/gnu/usr.bin/perl/pod/perlmodinstall.pod
index 72728f69e14..6ce5c84d7e5 100644
--- a/gnu/usr.bin/perl/pod/perlmodinstall.pod
+++ b/gnu/usr.bin/perl/pod/perlmodinstall.pod
@@ -79,11 +79,11 @@ You can get gzip from L<ftp://prep.ai.mit.edu/pub/gnu/>
 
 Or, you can combine this step with the next to save disk space:
 
-     gzip -dc yourmodule.tar.gz | tar -xof -
+     gzip -dc yourmodule.tar.gz | tar -xf -
 
 B. UNPACK
 
-Unpack the result with C<tar -xof yourmodule.tar>
+Unpack the result with C<tar -xf yourmodule.tar>
 
 C. BUILD
 
diff --git a/gnu/usr.bin/perl/pod/perlmodlib.PL b/gnu/usr.bin/perl/pod/perlmodlib.PL
index 063e56cafd9..9571b58f022 100644
--- a/gnu/usr.bin/perl/pod/perlmodlib.PL
+++ b/gnu/usr.bin/perl/pod/perlmodlib.PL
@@ -64,6 +64,7 @@ for my $filename (@files) {
         die "p5p-controlled module $filename missing =head1 NAME\n"
             if $filename !~ m{^(dist/|cpan/)}n # under our direct control
             && $filename !~ m{/_[^/]+\z}       # not private
+            && $filename !~ m{/unicore/}       # not unicore
             && $filename ne 'lib/meta_notation.pm'      # no pod
             && $filename ne 'lib/overload/numbers.pm';  # no pod
         warn "$filename missing =head1 NAME\n" unless $Quiet;
diff --git a/gnu/usr.bin/perl/pod/perlop.pod b/gnu/usr.bin/perl/pod/perlop.pod
index dd658bf5fbe..5b60a3b63c4 100644
--- a/gnu/usr.bin/perl/pod/perlop.pod
+++ b/gnu/usr.bin/perl/pod/perlop.pod
@@ -1660,7 +1660,7 @@ and although they often accept just C<"\012">, they seldom tolerate just
 C<"\015">.  If you get in the habit of using C<"\n"> for networking,
 you may be burned some day.
 X<newline> X<line terminator> X<eol> X<end of line>
-X<\n> X<\r> X<\r\n>
+X<\r>
 
 For constructs that do interpolate, variables beginning with "C<$>"
 or "C<@>" are interpolated.  Subscripted variables such as C<$a[3]> or
diff --git a/gnu/usr.bin/perl/pp.c b/gnu/usr.bin/perl/pp.c
index babf34843e2..6d419cc7626 100644
--- a/gnu/usr.bin/perl/pp.c
+++ b/gnu/usr.bin/perl/pp.c
@@ -2944,12 +2944,13 @@ PP(pp_srand)
                              "Integer overflow in srand");
             anum = UV_MAX;
         }
+        (void)srand48_deterministic((Rand_seed_t)anum);
     }
     else {
         anum = seed();
+        (void)seedDrand01((Rand_seed_t)anum);
     }
 
-    (void)seedDrand01((Rand_seed_t)anum);
     PL_srand_called = TRUE;
     if (anum)
 	XPUSHu(anum);
diff --git a/gnu/usr.bin/perl/regen/lib_cleanup.pl b/gnu/usr.bin/perl/regen/lib_cleanup.pl
index 5c5c4e24ef6..61039b2838f 100644
--- a/gnu/usr.bin/perl/regen/lib_cleanup.pl
+++ b/gnu/usr.bin/perl/regen/lib_cleanup.pl
@@ -74,6 +74,12 @@ foreach my $file (@ext) {
                 $package = $1;
                 last;
             }
+            elsif (/^\s*package\s*$/) {
+                # If they're hiding their package name, we ignore them
+                ++$ignore{"/$path"};
+                $package='';
+                last;
+            }
         }
         close $fh
             or die "Can't close $file: $!";
diff --git a/gnu/usr.bin/perl/shlib_version b/gnu/usr.bin/perl/shlib_version
index 0aab0406bf8..a5757c1bcc6 100644
--- a/gnu/usr.bin/perl/shlib_version
+++ b/gnu/usr.bin/perl/shlib_version
@@ -1,2 +1,2 @@
-major=19
+major=20
 minor=0
diff --git a/gnu/usr.bin/perl/t/lib/h2ph.pht b/gnu/usr.bin/perl/t/lib/h2ph.pht
index f068d6dae46..cda8d21051c 100644
--- a/gnu/usr.bin/perl/t/lib/h2ph.pht
+++ b/gnu/usr.bin/perl/t/lib/h2ph.pht
@@ -90,10 +90,6 @@ unless(defined(&_H2PH_H_)) {
     }
     eval("sub flim () { 0; }") unless defined(&flim);
     eval("sub flam () { 1; }") unless defined(&flam);
-    eval 'sub blli_in_use {
-        my($blli) = @_;
-	    eval q({  ($blli->{l2_proto}) ||  ($blli->{l3_proto}); });
-    }' unless defined(&blli_in_use);
     eval 'sub multiline () {"multilinestring";}' unless defined(&multiline);
 }
 1;
diff --git a/gnu/usr.bin/perl/t/op/getppid.t b/gnu/usr.bin/perl/t/op/getppid.t
index 0a5dbcef1aa..fc0fa529705 100755
--- a/gnu/usr.bin/perl/t/op/getppid.t
+++ b/gnu/usr.bin/perl/t/op/getppid.t
@@ -100,7 +100,7 @@ sub fork_and_retrieve {
 		}
 	    } else {
 		# Fudge it by waiting a bit more:
-		sleep 2;
+		sleep 3;
 	    }
 	    my $ppid2 = getppid();
 	    print $w "$how,$ppid1,$ppid2\n";
diff --git a/gnu/usr.bin/perl/t/porting/customized.dat b/gnu/usr.bin/perl/t/porting/customized.dat
index dd41c3d4537..fd805115f60 100644
--- a/gnu/usr.bin/perl/t/porting/customized.dat
+++ b/gnu/usr.bin/perl/t/porting/customized.dat
@@ -2,6 +2,7 @@
 #     cd t
 #     ./perl -I../lib porting/customized.t --regen
 Digest cpan/Digest/Digest.pm 43f7f544cb11842b2f55c73e28930da50774e081
+Digest::MD5 cpan/Digest-MD5/t/files.t f8fe234035918d3b7324eba05f73e7e903a45ca0
 Locale::Maketext::Simple cpan/Locale-Maketext-Simple/lib/Locale/Maketext/Simple.pm 57ed38905791a17c150210cd6f42ead22a7707b6
 Math::Complex cpan/Math-Complex/lib/Math/Complex.pm 198ea6c6c584f5ea79a0fd7e9d411d0878f3b2af
 Math::Complex cpan/Math-Complex/t/Complex.t 4f307ed6fc59f1e5fb0e6b11103fc631b6bdb335
@@ -17,7 +18,7 @@ Pod::Checker cpan/Pod-Checker/t/pod/contains_bad_pod.xr 73538fd80dfe6e19ad561fe0
 Pod::Checker cpan/Pod-Checker/t/pod/selfcheck.t 8ce3cfd38e4b9bcf5bc7fe7f2a14195e49aed7d8
 Pod::Checker cpan/Pod-Checker/t/pod/testcmp.pl a0cd5c8eca775c7753f4464eee96fa916e3d8a16
 Pod::Checker cpan/Pod-Checker/t/pod/testpchk.pl b2072c7f4379fd050e15424175d7cac5facf5b3b
-Pod::Perldoc cpan/Pod-Perldoc/lib/Pod/Perldoc.pm 582be34c077c9ff44d99914724a0cc2140bcd48c
+Pod::Perldoc cpan/Pod-Perldoc/lib/Pod/Perldoc.pm d97aa26b722e6e3120b19ee0d7cf9af04dfdfb7f
 autodie cpan/autodie/lib/autodie/exception.pm b99e4e35a9ed36de94d54437888822ced4936207
 autodie cpan/autodie/lib/autodie/hints.pm e1998fec61fb4e82fe46585bd82c73200be6f262
 autodie cpan/autodie/t/exceptions.t ad315a208f875e06b0964012ce8d65daa438c036
@@ -26,4 +27,4 @@ autodie cpan/autodie/t/mkdir.t 9e70d2282a3cc7d76a78bf8144fccba20fb37dac
 autodie cpan/autodie/t/recv.t 63bea2daa330e44b67714527ddf701c1bf3a6954
 experimental cpan/experimental/t/basic.t cb9da8dd05b854375809872a05dd32637508d5da
 version cpan/version/lib/version.pm 7ef9219d1d5f1d71f08a79f3b0577df138b21b12
-version vutil.c 105543ef1824fbc2429a7d5ebd19189c8081fede
+version vutil.c 074fb201e9a20a845764f671eb1021a6020ebea1
diff --git a/gnu/usr.bin/perl/t/porting/dual-life.t b/gnu/usr.bin/perl/t/porting/dual-life.t
index 4ad2256ef29..fdfc9b692d4 100644
--- a/gnu/usr.bin/perl/t/porting/dual-life.t
+++ b/gnu/usr.bin/perl/t/porting/dual-life.t
@@ -24,6 +24,12 @@ use File::Spec::Functions;
 # Exceptions that are found in dual-life bin dirs but aren't
 # installed by default; some occur only during testing:
 my $not_installed = qr{^(?:
+  \.\./cpan/Archive-Tar/bin/ptar.*
+   |
+  \.\./cpan/JSON-PP/bin/json_pp
+   |
+  \.\./cpan/IO-Compress/bin/zipdetails
+   |
   \.\./cpan/Encode/bin/u(?:cm(?:2table|lint|sort)|nidump)
    |
   \.\./cpan/Module-(?:Metadata|Build)
diff --git a/gnu/usr.bin/perl/t/re/speed.t b/gnu/usr.bin/perl/t/re/speed.t
index 9a57de167f8..af0e4330a01 100644
--- a/gnu/usr.bin/perl/t/re/speed.t
+++ b/gnu/usr.bin/perl/t/re/speed.t
@@ -42,7 +42,7 @@ run_tests() unless caller;
 sub run_tests {
 
 
-    watchdog(($::running_as_thread && $::running_as_thread) ? 150 : 225);
+    watchdog(($::running_as_thread && $::running_as_thread) ? 150 : 540);
 
     {
         # [perl #120446]
@@ -153,7 +153,7 @@ PROG
         my $substr= substr( $str, 1 );
         1 while $substr=~m/0/g;
         $elapsed += time;
-        ok( $elapsed <= 1, "should not COW on long string with substr and m//g");
+        ok( $elapsed <= 2, "should not COW on long string with substr and m//g");
     }
 
     # [perl #133185] Infinite loop
diff --git a/gnu/usr.bin/perl/util.c b/gnu/usr.bin/perl/util.c
index e5320c8b8c6..a9357004d6f 100644
--- a/gnu/usr.bin/perl/util.c
+++ b/gnu/usr.bin/perl/util.c
@@ -4449,6 +4449,9 @@ Perl_parse_unicode_opts(pTHX_ const char **popt)
 U32
 Perl_seed(pTHX)
 {
+#if defined(__OpenBSD__)
+	return arc4random();
+#else
     /*
      * This is really just a quick hack which grabs various garbage
      * values.  It really should be a real hash algorithm which
@@ -4517,6 +4520,7 @@ Perl_seed(pTHX)
     u += SEED_C5 * (U32)PTR2UV(&when);
 #endif
     return u;
+#endif
 }
 
 void
diff --git a/gnu/usr.bin/perl/utils.lst b/gnu/usr.bin/perl/utils.lst
index 8d65a622625..2564f6e308a 100644
--- a/gnu/usr.bin/perl/utils.lst
+++ b/gnu/usr.bin/perl/utils.lst
@@ -10,19 +10,13 @@ utils/encguess
 utils/h2ph
 utils/h2xs
 utils/instmodsh
-utils/json_pp
 utils/libnetcfg
-utils/perlbug	# link = utils/perlthanks
+utils/perlbug
 utils/perldoc
 utils/perlivp
 utils/piconv
 utils/pl2pm
 utils/pod2html
 utils/prove
-utils/ptar
-utils/ptardiff
-utils/ptargrep
-utils/shasum
 utils/splain
 utils/xsubpp
-utils/zipdetails
diff --git a/gnu/usr.bin/perl/utils/Makefile.PL b/gnu/usr.bin/perl/utils/Makefile.PL
index f9f80ed451d..8c2a786df12 100644
--- a/gnu/usr.bin/perl/utils/Makefile.PL
+++ b/gnu/usr.bin/perl/utils/Makefile.PL
@@ -35,9 +35,9 @@ print $fh <<'EOT';
 # Files to be built with variable substitution after miniperl is
 # available.  Dependencies handled manually below (for now).
 
-pl = corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL encguess.PL xsubpp.PL pod2html.PL zipdetails.PL
-plextract = corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep shasum splain libnetcfg piconv enc2xs encguess xsubpp pod2html zipdetails
-plextractexe = ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./encguess ./xsubpp ./pod2html ./zipdetails
+pl = corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL encguess.PL xsubpp.PL pod2html.PL
+plextract = corelist cpan h2ph h2xs instmodsh perlbug perldoc perlivp pl2pm prove splain libnetcfg piconv enc2xs encguess xsubpp pod2html
+plextractexe = ./corelist ./cpan ./h2ph ./h2xs ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./splain ./libnetcfg ./piconv ./enc2xs ./encguess ./xsubpp ./pod2html
 
 all: $(plextract) 
 
@@ -54,8 +54,6 @@ h2xs:		h2xs.PL ../config.sh
 
 instmodsh:	instmodsh.PL ../config.sh
 
-json_pp:	json_pp.PL ../config.sh
-
 perlbug:	perlbug.PL ../config.sh ../patchlevel.h
 
 perldoc:	perldoc.PL ../config.sh
@@ -64,16 +62,8 @@ perlivp:	perlivp.PL ../config.sh
 
 prove:		prove.PL ../config.sh
 
-ptar:		ptar.PL ../config.sh
-
-ptardiff:	ptardiff.PL ../config.sh
-
-ptargrep:	ptargrep.PL ../config.sh
-
 pl2pm:		pl2pm.PL ../config.sh
 
-shasum:		shasum.PL ../config.sh
-
 splain:		splain.PL ../config.sh ../lib/diagnostics.pm
 
 libnetcfg:	libnetcfg.PL ../config.sh
@@ -86,8 +76,6 @@ enc2xs:		encguess.PL ../config.sh
 
 xsubpp:		xsubpp.PL ../config.sh
 
-zipdetails:	zipdetails.PL ../config.sh
-
 pod2html:	pod2html.PL ../config.sh ../ext/Pod-Html/bin/pod2html
 
 clean:
diff --git a/gnu/usr.bin/perl/utils/h2ph.PL b/gnu/usr.bin/perl/utils/h2ph.PL
index db787499ebe..36317d37278 100644
--- a/gnu/usr.bin/perl/utils/h2ph.PL
+++ b/gnu/usr.bin/perl/utils/h2ph.PL
@@ -573,7 +573,7 @@ sub next_line
                 $in =~ s/\?\?</{/g;                         # | ??<|  {|
                 $in =~ s/\?\?>/}/g;                         # | ??>|  }|
             }
-	    if ($in =~ /^\#ifdef __LANGUAGE_PASCAL__/) {
+	    if ($in =~ s/^\#ifdef __LANGUAGE_PASCAL__//) {
 		# Tru64 disassembler.h evilness: mixed C and Pascal.
 		while (<IN>) {
 		    last if /^\#endif/;
@@ -581,8 +581,8 @@ sub next_line
 		$in = "";
 		next READ;
 	    }
-	    if ($in =~ /^extern inline / && # Inlined assembler.
-		$^O eq 'linux' && $file =~ m!(?:^|/)asm/[^/]+\.h$!) {
+	    # Skip inlined functions in headers
+	    if ($in =~ s/^(extern|static) (__inline__|inline) .*[^;]\s*$//) {
 		while (<IN>) {
 		    last if /^}/;
 		}
diff --git a/gnu/usr.bin/perl/utils/perlbug.PL b/gnu/usr.bin/perl/utils/perlbug.PL
index d1eb1e04a87..2f7a9e8d675 100644
--- a/gnu/usr.bin/perl/utils/perlbug.PL
+++ b/gnu/usr.bin/perl/utils/perlbug.PL
@@ -358,15 +358,14 @@ sub Query {
 This program provides an easy way to send a thank-you message back to the
 authors and maintainers of perl.
 
-If you wish to submit a bug report, please run it without the -T flag
-(or run the program perlbug rather than perlthanks)
+If you wish to submit a bug report, please run it without the -T flag.
 EOF
 	} else {
 	    paraprint <<"EOF";
 This program provides an easy way to create a message reporting a
 bug in the core perl distribution (along with tests or patches)
 to the volunteers who maintain perl at $address.  To send a thank-you
-note to $thanksaddress instead of a bug report, please run 'perlthanks'.
+note to $thanksaddress instead of a bug report, please use the -T flag.
 
 Please do not use $0 to send test messages, test whether perl
 works, or to report bugs in perl modules from CPAN.
@@ -1273,8 +1272,6 @@ S<[ B<-S> ]> S<[ B<-t> ]>  S<[ B<-d> ]>  S<[ B<-A> ]>  S<[ B<-h> ]> S<[ B<-T> ]>
 B<perlbug> S<[ B<-v> ]> S<[ B<-r> I<returnaddress> ]>
  S<[ B<-A> ]> S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
 
-B<perlthanks>
-
 =head1 DESCRIPTION
 
 
@@ -1427,8 +1424,8 @@ description of what's wrong is fine.
 
 =item Can you use C<perlbug> to submit a thank-you note?
 
-Yes, you can do this by either using the C<-T> option, or by invoking
-the program as C<perlthanks>. Thank-you notes are good. It makes people
+Yes, you can do this by using the C<-T> option.
+Thank-you notes are good. It makes people
 smile. 
 
 =back
diff --git a/gnu/usr.bin/perl/vutil.c b/gnu/usr.bin/perl/vutil.c
index 23674891534..8aa1f261a59 100644
--- a/gnu/usr.bin/perl/vutil.c
+++ b/gnu/usr.bin/perl/vutil.c
@@ -614,7 +614,11 @@ VER_NV:
 
 	/* may get too much accuracy */ 
 	char tbuf[64];
+#ifdef __vax__
+	SV *sv = SvNVX(ver) > 10e37 ? newSV(64) : 0;
+#else
 	SV *sv = SvNVX(ver) > 10e50 ? newSV(64) : 0;
+#endif
 	char *buf;
 
 #if PERL_VERSION_GE(5,19,0)
diff --git a/gnu/usr.bin/perl/win32/GNUmakefile b/gnu/usr.bin/perl/win32/GNUmakefile
index 76aadaf9925..b0eb5e7248e 100644
--- a/gnu/usr.bin/perl/win32/GNUmakefile
+++ b/gnu/usr.bin/perl/win32/GNUmakefile
@@ -1834,6 +1834,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
 	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
 	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+	-if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
 	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
 	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
 	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
diff --git a/gnu/usr.bin/perl/win32/Makefile b/gnu/usr.bin/perl/win32/Makefile
index 8c97e64a878..40a12ef2e48 100644
--- a/gnu/usr.bin/perl/win32/Makefile
+++ b/gnu/usr.bin/perl/win32/Makefile
@@ -1356,6 +1356,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
 	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
 	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+	-if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
 	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
 	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
 	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
diff --git a/gnu/usr.bin/perl/win32/makefile.mk b/gnu/usr.bin/perl/win32/makefile.mk
index 9af6a79d8e2..bdcfab1dd53 100644
--- a/gnu/usr.bin/perl/win32/makefile.mk
+++ b/gnu/usr.bin/perl/win32/makefile.mk
@@ -1751,6 +1751,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
 	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
 	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+	-if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
 	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
 	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
 	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl