initial import of NetBSD tree

1 files changed, 187 insertions, 0 deletions

diff --git a/gnu/usr.bin/tar/Makefile.gnu b/gnu/usr.bin/tar/Makefile.gnu
new file mode 100644
index 00000000000..08eed91dbe0
--- /dev/null
+++ b/gnu/usr.bin/tar/Makefile.gnu
@@ -0,0 +1,187 @@
+# Generated automatically from Makefile.in by configure.
+# Un*x Makefile for GNU tar program.
+# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+#	$Id: Makefile.gnu,v 1.1 1995/10/18 08:41:08 deraadt Exp $
+
+#### Start of system configuration section. ####
+
+srcdir = .
+VPATH = .
+
+# If you use gcc, you should either run the fixincludes script that
+# comes with it or else use gcc with the -traditional option.  Otherwise
+# ioctl calls will be compiled incorrectly on some systems.
+CC = gcc
+YACC = bison -y
+INSTALL = /usr/local/bin/install -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL) -m 644
+
+# Things you might add to DEFS:
+# -DSTDC_HEADERS	If you have ANSI C headers and libraries.
+# -DHAVE_UNISTD_H	If you have unistd.h.
+# -DHAVE_STRING_H	If you don't have ANSI C headers but have string.h.
+# -DHAVE_LIMITS_H	If you have limits.h.
+# -DBSD42		If you have sys/dir.h (unless you use -DPOSIX),
+#			sys/file.h, and st_blocks in `struct stat'.
+# -DDIRENT		If you have dirent.h.
+# -DSYSNDIR		Old Xenix systems (sys/ndir.h).
+# -DSYSDIR		Old BSD systems (sys/dir.h).
+# -DNDIR		Old System V systems (ndir.h).
+# -DMAJOR_IN_MKDEV	If major, minor, makedev defined in sys/mkdev.h.
+# -DMAJOR_IN_SYSMACROS	If major, minor, makedev defined in sys/sysmacros.h.
+# -DRETSIGTYPE=int	If your signal handlers return int, not void.
+# -DHAVE_SYS_MTIO_H	If you have sys/mtio.h (magtape ioctls).
+# -DHAVE_SYS_GENTAPE_H	If you have sys/gentape.h (ISC magtape ioctls).
+# -DHAVE_NETDB_H	To use rexec for remote tape operations
+#			instead of forking rsh or remsh.
+# -DNO_REMOTE		If you have neither a remote shell nor rexec.
+# -DHAVE_VPRINTF	If you have vprintf function.
+# -DHAVE_DOPRNT		If you have _doprnt function (but lack vprintf).
+# -DHAVE_FTIME		If you have ftime system call.
+# -DHAVE_STRSTR		If you have strstr function.
+# -DHAVE_VALLOC		If you have valloc function.
+# -DHAVE_MKDIR		If you have mkdir and rmdir system calls.
+# -DHAVE_MKNOD		If you have mknod system call.
+# -DHAVE_RENAME 	If you have rename system call.
+# -DHAVE_GETCWD		If not POSIX.1 but have getcwd function.
+# -DHAVE_FTRUNCATE	If you have ftruncate system call.
+# -DV7			On Version 7 Unix (not tested in a long time).
+# -DEMUL_OPEN3		If you lack a 3-argument version of open, and want
+#			to emulate it with system calls you do have.
+# -DNO_OPEN3		If you lack the 3-argument open and want to
+#			disable the tar -k option instead of emulating open.
+# -DXENIX		If you have sys/inode.h and need it to be included.
+
+DEF_AR_FILE = /dev/rst0
+DEFBLOCKING = 20
+DEFS =  -DRETSIGTYPE=void -DDIRENT=1 -DHAVE_SYS_MTIO_H=1 -DHAVE_UNISTD_H=1 -DHAVE_GETGRGID=1 -DHAVE_GETPWUID=1 -DHAVE_STRING_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STRSTR=1 -DHAVE_VALLOC=1 -DHAVE_MKDIR=1 -DHAVE_MKNOD=1 -DHAVE_RENAME=1 -DHAVE_FTRUNCATE=1 -DHAVE_GETCWD=1 -DHAVE_VPRINTF=1 -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" -DDEFBLOCKING=$(DEFBLOCKING)
+
+# Set this to rtapelib.o unless you defined NO_REMOTE, in which case
+# make it empty.
+RTAPELIB = rtapelib.o
+LIBS = 
+
+CFLAGS = -g
+LDFLAGS = -g
+
+prefix = /usr/bin
+exec_prefix = $(prefix)
+
+# Prefix for each installed program, normally empty or `g'.
+binprefix = 
+
+# The directory to install tar in.
+bindir = $(exec_prefix)/bin
+
+# Where to put the rmt executable.
+libdir = /sbin
+
+# The directory to install the info files in.
+infodir = $(prefix)/info
+
+#### End of system configuration section. ####
+
+SHELL = /bin/sh
+
+SRC1 =	tar.c create.c extract.c buffer.c getoldopt.c update.c gnu.c mangle.c
+SRC2 =  version.c list.c names.c diffarch.c port.c fnmatch.c getopt.c malloc.c
+SRC3 =  getopt1.c regex.c getdate.y getdate.c alloca.c
+SRCS =	$(SRC1) $(SRC2) $(SRC3)
+OBJ1 =	tar.o create.o extract.o buffer.o getoldopt.o update.o gnu.o mangle.o
+OBJ2 =	version.o list.o names.o diffarch.o port.o fnmatch.o getopt.o 
+OBJ3 =  getopt1.o regex.o getdate.o $(RTAPELIB) 
+OBJS =	$(OBJ1) $(OBJ2) $(OBJ3)
+AUX =   README INSTALL NEWS COPYING ChangeLog Makefile.in makefile.pc \
+	configure configure.in \
+	tar.h fnmatch.h pathmax.h port.h open3.h getopt.h regex.h \
+	rmt.h rmt.c rtapelib.c \
+	msd_dir.h msd_dir.c tcexparg.c \
+	level-0 level-1 backup-specs dump-remind getpagesize.h
+#	tar.texinfo tar.info* texinfo.tex \
+
+all:	tar rmt 
+# tar.info
+
+.c.o:
+	$(CC) -c $(CFLAGS) $(CPPFLAGS) $(DEFS) -I$(srcdir) -I. $<
+
+tar:	$(OBJS)
+	$(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+rmt:	rmt.c
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(srcdir)/rmt.c $(LIBS)
+
+tar.info: tar.texinfo
+	makeinfo $(srcdir)/tar.texinfo
+
+install: all
+	$(INSTALL_PROGRAM) tar $(bindir)/$(binprefix)tar
+	-test ! -f rmt || $(INSTALL_PROGRAM) rmt $(libdir)/rmt
+#	for file in $(srcdir)/tar.info*; \
+#	do $(INSTALL_DATA) $$file $(infodir)/$$file; \
+#	done
+
+uninstall:
+	rm -f $(bindir)/$(binprefix)tar	$(infodir)/tar.info*
+	-rm -f $(libdir)/rmt
+
+$(OBJS): tar.h pathmax.h port.h
+regex.o buffer.o tar.o: regex.h
+tar.o fnmatch.o: fnmatch.h
+
+getdate.c: getdate.y
+	$(YACC) $(srcdir)/getdate.y
+	mv y.tab.c getdate.c
+# getdate.y has 8 shift/reduce conflicts.
+
+TAGS:	$(SRCS)
+	etags $(SRCS)
+
+clean:
+	rm -f *.o tar rmt core
+mostlyclean: clean
+
+distclean: clean
+	rm -f Makefile config.status
+
+realclean: distclean
+	rm -f TAGS *.info* getdate.c y.tab.c
+
+shar: $(SRCS) $(AUX)
+	shar $(SRCS) $(AUX) | gzip > tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c`.shar.z
+
+dist: $(SRCS) $(AUX)
+	echo tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c` > .fname
+	-rm -rf `cat .fname`
+	mkdir `cat .fname`
+	for file in $(SRCS) $(AUX); do \
+          ln $$file `cat .fname` || cp $$file `cat .fname`; done
+	tar chzf `cat .fname`.tar.z `cat .fname`
+	-rm -rf `cat .fname` .fname
+
+tar.zoo: $(SRCS) $(AUX)
+	-rm -rf tmp.dir
+	-mkdir tmp.dir
+	-rm tar.zoo
+	for X in $(SRCS) $(AUX) ; do echo $$X ; sed 's/$$/
/' $$X > tmp.dir/$$X ; done
+	cd tmp.dir ; zoo aM ../tar.zoo *
+	-rm -rf tmp.dir
+
+# Prevent GNU make v3 from overflowing arg limit on SysV.
+.NOEXPORT: