Remove ancient version of zlib bundled with GNU cvs.

Avoid false positive in security scan.  Removal of embedded zlib
ensures that cvs is linked dynamically with /usr/lib/libz.so.  We
do not want any zlib 1.1.3 from 2001 in our source tree.

no binary diff; OK millert@ deraadt@

110 files changed, 0 insertions, 21217 deletions

diff --git a/gnu/usr.bin/cvs/zlib/.cvsignore b/gnu/usr.bin/cvs/zlib/.cvsignore
deleted file mode 100644
index 51de950c818..00000000000
--- a/gnu/usr.bin/cvs/zlib/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-Makefile
-example
-minigzip
-Debug
-Release
diff --git a/gnu/usr.bin/cvs/zlib/ChangeLog b/gnu/usr.bin/cvs/zlib/ChangeLog
deleted file mode 100644
index 0db0b1a8f09..00000000000
--- a/gnu/usr.bin/cvs/zlib/ChangeLog
+++ /dev/null
@@ -1,250 +0,0 @@
-Wed Sep 11 00:59:44 1996  Jim Kingdon  <kingdon@harvey.cyclic.com>
-
-	* build_zlib.com: Add infblock.c and infcodes.c.
-
-	* build_zlib.com: New file.
-
-	* Makefile.in (DISTFILES): Add build_zlib.com.
-
-Fri Aug 16 16:07:38 1996  Norbert Kiesel  <nk@col.sw-ley.de>
-
-	* Makefile.in (installdirs): new (empty) target
-
-		ChangeLog file for zlib
-
-Changes in 1.0.4 (24 Jul 96)
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
-  bit, so the decompressor could decompress all the correct data but went
-  on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-- use z_error only for DEBUG (avoid problem with DLLs)
-
-Changes in 1.0.3 (2 Jul 96)
-- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
-  small and medium models; this makes the library incompatible with previous
-  versions for these models. (No effect in large model or on other systems.)
-- return OK instead of BUF_ERROR if previous deflate call returned with
-  avail_out as zero but there is nothing to do
-- added memcmp for non STDC compilers
-- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
-- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
-- better check for 16-bit mode MSC (avoids problem with Symantec)
-
-Changes in 1.0.2 (23 May 96)
-- added Windows DLL support
-- added a function zlibVersion (for the DLL support)
-- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
-- Bytef is define's instead of typedef'd only for Borland C
-- avoid reading uninitialized memory in example.c
-- mention in README that the zlib format is now RFC1950
-- updated Makefile.dj2
-- added algorithm.doc
-
-Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
-- fix array overlay in deflate.c which sometimes caused bad compressed data
-- fix inflate bug with empty stored block
-- fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generated bad compressed data.
-- Bytef is define'd instead of typedef'ed (work around Borland bug)
-- added an INDEX file
-- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
-  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
-- speed up adler32 for modern machines without auto-increment
-- added -ansi for IRIX in configure
-- static_init_done in trees.c is an int
-- define unlink as delete for VMS
-- fix configure for QNX
-- add configure branch for SCO and HPUX
-- avoid many warnings (unused variables, dead assignments, etc...)
-- no fdopen for BeOS
-- fix the Watcom fix for 32 bit mode (define FAR as empty)
-- removed redefinition of Byte for MKWERKS
-- work around an MWKERKS bug (incorrect merge of all .h files)
-
-Changes in 0.99 (27 Jan 96)
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
-  and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixed deflate for 64-bit systems (detected on Cray)
-- fixed inflate_blocks for 64-bit systems (detected on Alpha)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- make falloc completely reentrant (inftrees.c)
-- fixed very unlikely race condition in ct_static_init
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
-  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic (no matches beyond end of input)
-- Document Z_SYNC_FLUSH
-- add uninstall in Makefile
-- Check for __cpluplus in zlib.h
-- Better test in ct_align for partial flush
-- avoid harmless warnings for Borland C++
-- initialize hash_head in deflate.c
-- avoid warning on fdopen (gzio.c) for HP cc -Aa
-- include stdlib.h for STDC compilers
-- include errno.h for Cray
-- ignore error if ranlib doesn't exist
-- call ranlib twice for NeXTSTEP
-- use exec_prefix instead of prefix for libz.a
-- renamed ct_* as _tr_* to avoid conflict with applications
-- clear z->msg in inflateInit2 before any error return
-- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
-- fixed typo in zconf.h (_GNUC__ => __GNUC__)
-- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
-- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
-- in fcalloc, normalize pointer if size > 65520 bytes
-- don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
-- use Z_BINARY instead of BINARY
-- document that gzclose after gzdopen will close the file
-- allow "a" as mode in gzopen.
-- fix error checking in gzread
-- allow skipping .gz extra-field on pipes
-- added reference to Perl interface in README
-- put the crc table in FAR data (I dislike more and more the medium model :)
-- added get_crc_table
-- added a dimension to all arrays (Borland C can't count).
-- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
-- guard against multiple inclusion of *.h (for precompiled header on Mac)
-- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
-- don't use unsized arrays to avoid silly warnings by Visual C++:
-     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
-     (what's wrong with far data in far model?).
-- define enum out of inflate_blocks_state to allow compilation with C++
-
-Changes in 0.95 (16 Aug 95)
-- fix MSDOS small and medium model (now easier to adapt to any compiler)
-- inlined send_bits
-- fix the final (:-) bug for deflate with flush (output was correct but
-  not completely flushed in rare occasions).
-- default window size is same for compression and decompression
-  (it's now sufficient to set MAX_WBITS in zconf.h).
-- voidp -> voidpf and voidnp -> voidp (for consistency with other
-  typedefs and because voidnp was not near in large model).
-
-Changes in 0.94 (13 Aug 95)
-- support MSDOS medium model
-- fix deflate with flush (could sometimes generate bad output)
-- fix deflateReset (zlib header was incorrectly suppressed)
-- added support for VMS
-- allow a compression level in gzopen()
-- gzflush now calls fflush
-- For deflate with flush, flush even if no more input is provided.
-- rename libgz.a as libz.a
-- avoid complex expression in infcodes.c triggering Turbo C bug
-- work around a problem with gcc on Alpha (in INSERT_STRING)
-- don't use inline functions (problem with some gcc versions)
-- allow renaming of Byte, uInt, etc... with #define.
-- avoid warning about (unused) pointer before start of array in deflate.c
-- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
-- avoid reserved word 'new' in trees.c
-
-Changes in 0.93 (25 June 95)
-- temporarily disable inline functions
-- make deflate deterministic
-- give enough lookahead for PARTIAL_FLUSH
-- Set binary mode for stdin/stdout in minigzip.c for OS/2
-- don't even use signed char in inflate (not portable enough)
-- fix inflate memory leak for segmented architectures
-
-Changes in 0.92 (3 May 95)
-- don't assume that char is signed (problem on SGI)
-- Clear bit buffer when starting a stored block
-- no memcpy on Pyramid
-- suppressed inftest.c
-- optimized fill_window, put longest_match inline for gcc
-- optimized inflate on stored blocks.
-- untabify all sources to simplify patches
-
-Changes in 0.91 (2 May 95)
-- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
-- Document the memory requirements in zconf.h
-- added "make install"
-- fix sync search logic in inflateSync
-- deflate(Z_FULL_FLUSH) now works even if output buffer too short
-- after inflateSync, don't scare people with just "lo world"
-- added support for DJGPP
-
-Changes in 0.9 (1 May 95)
-- don't assume that zalloc clears the allocated memory (the TurboC bug
-  was Mark's bug after all :)
-- let again gzread copy uncompressed data unchanged (was working in 0.71)
-- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
-- added a test of inflateSync in example.c
-- moved MAX_WBITS to zconf.h because users might want to change that.
-- document explicitly that zalloc(64K) on MSDOS must return a normalized
-  pointer (zero offset)
-- added Makefiles for Microsoft C, Turbo C, Borland C++
-- faster crc32()
-
-Changes in 0.8 (29 April 95)
-- added fast inflate (inffast.c)
-- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
-  is incompatible with previous versions of zlib which returned Z_OK.
-- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
-  (actually that was not a compiler bug, see 0.81 above)
-- gzread no longer reads one extra byte in certain cases
-- In gzio destroy(), don't reference a freed structure
-- avoid many warnings for MSDOS
-- avoid the ERROR symbol which is used by MS Windows
-
-Changes in 0.71 (14 April 95)
-- Fixed more MSDOS compilation problems :( There is still a bug with
-  TurboC large model.
-
-Changes in 0.7 (14 April 95)
-- Added full inflate support.
-- Simplified the crc32() interface. The pre- and post-conditioning
-  (one's complement) is now done inside crc32(). WARNING: this is
-  incompatible with previous versions; see zlib.h for the new usage.
-
-Changes in 0.61 (12 April 95)
-- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
-
-Changes in 0.6 (11 April 95)
-- added minigzip.c
-- added gzdopen to reopen a file descriptor as gzFile
-- added transparent reading of non-gziped files in gzread.
-- fixed bug in gzread (don't read crc as data)
-- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
-- don't allocate big arrays in the stack (for MSDOS)
-- fix some MSDOS compilation problems
-
-Changes in 0.5:
-- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
-  not yet Z_FULL_FLUSH.
-- support decompression but only in a single step (forced Z_FINISH)
-- added opaque object for zalloc and zfree.
-- added deflateReset and inflateReset
-- added a variable zlib_version for consistency checking.
-- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
-  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
-
-Changes in 0.4:
-- avoid "zip" everywhere, use zlib instead of ziplib.
-- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
-  if compression method == 8.
-- added adler32 and crc32
-- renamed deflateOptions as deflateInit2, call one or the other but not both
-- added the method parameter for deflateInit2.
-- added inflateInit2
-- simplied considerably deflateInit and inflateInit by not supporting
-  user-provided history buffer. This is supported only in deflateInit2
-  and inflateInit2.
-
-Changes in 0.3:
-- prefix all macro names with Z_
-- use Z_FINISH instead of deflateEnd to finish compression.
-- added Z_HUFFMAN_ONLY
-- added gzerror()
diff --git a/gnu/usr.bin/cvs/zlib/FAQ b/gnu/usr.bin/cvs/zlib/FAQ
deleted file mode 100644
index 0feb6d3e9bb..00000000000
--- a/gnu/usr.bin/cvs/zlib/FAQ
+++ /dev/null
@@ -1,72 +0,0 @@
-
-		Frequently Asked Questions about zlib
-
-
-If your question is not there, please check the zlib home page 
-http://www.cdrom.com/pub/infozip/zlib/ which may have more recent information.
-
-
-1) I need a Windows DLL
-2) I need a Visual Basic interface to zlib
-3) compress() returns Z_BUF_ERROR
-4) deflate or inflate returns Z_BUF_ERROR
-5) Where is the zlib documentation (man pages, etc...)?
-6) Why don't you use GNU autoconf, libtool, etc...?
-7) There is a bug in zlib.
-8) I get "undefined reference to gzputc"
-
-
-
-1) I need a Windows DLL
-
-  The zlib sources can be compiled without change to produce a DLL.
-  If you want a precompiled DLL, see http://www.winimage.com/zLibDll
-
-
-2) I need a Visual Basic interface to zlib
-
-  See http://www.tcfb.com/dowseware/cmp-z-it.zip
-      http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
-  and contrib/visual-basic.txt
-
-3) compress() returns Z_BUF_ERROR
-
-  Make sure that before the call of compress, the length of the
-  compressed buffer is equal to the total size of the compressed buffer
-  and not zero.  For Visual Basic, check that this parameter is passed
-  by reference ("as any"), not by value ("as long").
-
-
-4) deflate or inflate returns Z_BUF_ERROR
-
-  Make sure that before the call avail_in and avail_out are not zero.
-
-
-5) Where is the zlib documentation (man pages, etc...)?
-
-  It's in zlib.h for the moment. Volunteers to transform this
-  to man pages, please contact jloup@gzip.org. Examples of zlib usage
-  are in the files example.c and minigzip.c.
-
-
-6) Why don't you use GNU autoconf, libtool, etc...?
-
-  Because we would like to keep zlib as a very small and simple package.
-  zlib is rather portable and doesn't need much configuration.
-
-
-7) There is a bug in zlib.
-
-  Most of the time, such problems are due to an incorrect usage
-  of zlib. Please try to reproduce the problem with a small
-  program and send us the corresponding source at zlib@quest.jpl.nasa.gov
-  Do not send multi-megabyte data files without prior agreement.
-
-
-8) I get "undefined reference to gzputc"
-
-  If "make test" produces something like
-     example.o(.text+0x174): 
-  check that you don't have old files libz.* in /usr/lib, /usr/local/lib
-  or /usr/X11R6/lib. Remove old versions then do "make install".
-
diff --git a/gnu/usr.bin/cvs/zlib/INDEX b/gnu/usr.bin/cvs/zlib/INDEX
deleted file mode 100644
index bb1e3f0b135..00000000000
--- a/gnu/usr.bin/cvs/zlib/INDEX
+++ /dev/null
@@ -1,51 +0,0 @@
-ChangeLog	history of changes
-INDEX		this file
-Make_vms.com	script for Vax/VMS
-Makefile	makefile for Unix (generated by configure)
-Makefile.b32	makefile for Borland C++   32-bit
-Makefile.bor	makefile for Borland C/C++ 16-bit
-Makefile.dj2	makefile for DJGPP 2.x
-Makefile.in	makefile for Unix (template for configure)
-Makefile.msc	makefile for Microsoft C 16-bit
-Makefile.riscos makefile for RISCOS
-Makefile.sas	makefile for Amiga SAS/C
-Makefile.tc	makefile for Turbo C
-Makefile.wat	makefile for Watcom C
-README		guess what
-algorithm.doc	description of the compression & decompression algorithms
-configure	configure script for Unix
-descrip.mms	makefile for Vax/VMS
-zlib.def        definition file for Windows DLL
-zlib.rc         definition file for Windows DLL
-
-
-		zlib public header files (must be kept):
-zconf.h
-zlib.h
-
-		private source files used to build the zlib library:
-adler32.c
-compress.c
-crc32.c
-deflate.c
-deflate.h
-gzio.c
-infblock.c
-infblock.h
-infcodes.c
-infcodes.h
-inffast.c
-inffast.h
-inflate.c
-inftrees.c
-inftrees.h
-infutil.c
-infutil.h
-trees.c
-uncompr.c
-zutil.c
-zutil.h
-
-		source files for sample programs:
-example.c
-minigzip.c
diff --git a/gnu/usr.bin/cvs/zlib/Make_vms.com b/gnu/usr.bin/cvs/zlib/Make_vms.com
deleted file mode 100644
index 0008d00bb68..00000000000
--- a/gnu/usr.bin/cvs/zlib/Make_vms.com
+++ /dev/null
@@ -1,115 +0,0 @@
-$! make libz under VMS
-$! written by Martin P.J. Zinser <m.zinser@gsi.de>
-$!
-$! Look for the compiler used
-$!
-$ ccopt = ""
-$ if f$getsyi("HW_MODEL").ge.1024
-$ then
-$  ccopt = "/prefix=all"+ccopt
-$  comp  = "__decc__=1"
-$  if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$  if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
-$   then
-$    comp  = "__vaxc__=1"
-$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$   else
-$    if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
-$    ccopt = "/decc/prefix=all"+ccopt
-$    comp  = "__decc__=1"
-$  endif
-$ endif
-$!
-$! Build the thing plain or with mms
-$!
-$ write sys$output "Compiling Zlib sources ..."
-$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
-$  then
-$   dele example.obj;*,minigzip.obj;*
-$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zutil.h zlib.h zconf.h
-$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
-                compress.c zlib.h zconf.h
-$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zutil.h zlib.h zconf.h
-$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflatec.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
-                gsio.c zutil.h zlib.h zconf.h
-$   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
-                infblock.c zutil.h zlib.h zconf.h infblock.h
-$   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
-                infcodes.c zutil.h zlib.h zconf.h inftrees.h
-$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
-                inffast.c zutil.h zlib.h zconf.h inffast.h
-$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
-                inflate.c zutil.h zlib.h zconf.h infblock.h
-$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
-                inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$   CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
-                infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
-                trees.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
-                uncompr.c zlib.h zconf.h
-$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
-                zutil.c zutil.h zlib.h zconf.h
-$   write sys$output "Building Zlib ..."
-$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
-$   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT' example" -
-                example.c zlib.h zconf.h
-$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   write sys$output "Building minigzip..."
-$   CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
-                minigzip.c zlib.h zconf.h
-$   call make minigzip.exe - 
-                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" - 
-                minigzip.obj libz.olb
-$  else
-$   mms/macro=('comp')
-$  endif
-$ write sys$output "Zlib build completed"
-$ exit
-$!
-$!
-$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
-$ V = 'F$Verify(0)
-$! P1 = What we are trying to make
-$! P2 = Command to make it
-$! P3 - P8  What it depends on
-$
-$ If F$Search(P1) .Eqs. "" Then Goto Makeit
-$ Time = F$CvTime(F$File(P1,"RDT"))
-$arg=3
-$Loop:
-$       Argument = P'arg
-$       If Argument .Eqs. "" Then Goto Exit
-$       El=0
-$Loop2:
-$       File = F$Element(El," ",Argument)
-$       If File .Eqs. " " Then Goto Endl
-$       AFile = ""
-$Loop3:
-$       OFile = AFile
-$       AFile = F$Search(File)
-$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
-$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
-$       Goto Loop3
-$NextEL:
-$       El = El + 1
-$       Goto Loop2
-$EndL:
-$ arg=arg+1
-$ If arg .Le. 8 Then Goto Loop
-$ Goto Exit
-$
-$Makeit:
-$ VV=F$VERIFY(0)
-$ write sys$output P2
-$ 'P2
-$ VV='F$Verify(VV)
-$Exit:
-$ If V Then Set Verify
-$ENDSUBROUTINE
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.b32 b/gnu/usr.bin/cvs/zlib/Makefile.b32
deleted file mode 100644
index fc3ac689892..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.b32
+++ /dev/null
@@ -1,104 +0,0 @@
-# Makefile for zlib
-# Borland C++   
-
-# This version of the zlib makefile was adapted by Chris Young for use
-# with Borland C 4.5x with the Dos Power Pack for a 32-bit protected mode
-# flat memory model.  It was created for use with POV-Ray ray tracer and
-# you may choose to edit the CFLAGS to suit your needs but the
-# switches -WX and -DMSDOS are required.
-# -- Chris Young 76702.1655@compuserve.com
-
-# To use, do "make -fmakefile.b32"
-
-# See zconf.h for details about the memory requirements.
-
-# ------------- Borland C++ -------------
-MODEL=-WX 
-CFLAGS= $(MODEL) -P-C -K -N- -k- -d -3 -r- -v- -f -DMSDOS
-CC=bcc32
-LD=bcc32
-LIB=tlib
-LDFLAGS= $(MODEL)
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	del zlib.lib
-	$(LIB) zlib +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.bor b/gnu/usr.bin/cvs/zlib/Makefile.bor
deleted file mode 100644
index 2116563d6fc..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.bor
+++ /dev/null
@@ -1,105 +0,0 @@
-# Makefile for zlib
-# Borland C++   ************ UNTESTED ***********
-
-# To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=-ms
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Turbo C++, Borland C++ -------------
-MODEL=-ml
-CFLAGS=-O2 -Z $(MODEL)
-CC=bcc
-LD=bcc
-LIB=tlib
-#   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-LDFLAGS=$(MODEL)
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	del zlib.lib
-	$(LIB) zlib +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.dj2 b/gnu/usr.bin/cvs/zlib/Makefile.dj2
deleted file mode 100644
index 398f28bbee3..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.dj2
+++ /dev/null
@@ -1,93 +0,0 @@
-# Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
-# Copyright (C) 1995-1996 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.dj2;  make test -fmakefile.dj2
-# 
-# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
-# 
-#    make install -fmakefile.dj2
-# 
-# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
-# in the sample below if the pattern of the DJGPP distribution is to
-# be followed.  Remember that, while <sp>'es around <=> are ignored in
-# makefiles, they are *not* in batch files or in djgpp.env.
-# - - - - -
-# [make]
-# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
-# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
-# BUTT=-m486
-# - - - - -
-# Alternately, these variables may be defined below, overriding the values
-# in djgpp.env, as
-INCLUDE_PATH=c:\usr\include
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is not found, replace with copy /Y .
-CP=cp -f
-# If install.exe is not found, replace with $(CP).
-INSTALL=install
-# The default value of RM is "rm -f."  If "rm.exe" is not found, uncomment:
-# RM=del
-LDLIBS=-L. -lz
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
-
-.PHONY : uninstall clean
-
-install: $(INCL) $(LIBS)
-	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
-	for %%f in ($(INCL)) do $(INSTALL) %%f $(INCLUDE_PATH)
-	for %%p in ($(LIBS)) do $(INSTALL) %%p $(LIBRARY_PATH)
-
-uninstall:
-	for %%f in ($(INCL)) do $(RM) $(INCLUDE_PATH)\%%f
-	for %%p in ($(LIBS)) do $(RM) $(LIBRARY_PATH)\%%p
-
-clean:
-	for %%p in (*.d *.o *.exe libz.a libz.so* foo.gz) do $(RM) %%p
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.in b/gnu/usr.bin/cvs/zlib/Makefile.in
deleted file mode 100644
index 7b585adad35..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.in
+++ /dev/null
@@ -1,150 +0,0 @@
-# Makefile for zlib
-# Copyright (C) 1995-1996 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-srcdir     = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH      = @srcdir@
-
-# To compile and test, type:
-#   ./configure; make test
-# The call of configure is optional if you don't have special requirements
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-LDFLAGS=-L. -lz
-LDSHARED=$(CC)
-
-VER=1.0.4
-LIBS=libz.a
-
-# For CVS, separate AR and ARFLAGS.
-AR=ar
-RANLIB=ranlib
-TAR=tar
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-# build_zlib.com added for CVS
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] descrip.mms \
-	    zlib.def zlib.rc algorithm.doc  *.[ch] \
-	    build_zlib.com
-
-# For CVS, just build libz.a
-all: libz.a
-
-test: all
-	./example
-	echo hello world | ./minigzip | ./minigzip -d 
-
-# For CVS, use an explict rc after $(AR).
-libz.a: $(OBJS)
-	$(AR) rc $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) 2>/dev/null
-
-libz.so.$(VER): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
-	rm -f libz.so; ln -s $@ libz.so
-
-example: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-# For CVS, remove the install and uninstall targets.
-install:
-uninstall:
-.PHONY: install uninstall
-
-installdirs:
-.PHONY: installdirs
-
-# mostlyclean added for CVS.
-clean mostlyclean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
-
-# distclean and realclean added for CVS.
-distclean realclean: clean
-	rm -f Makefile
-.PHONY: distclean realclean
-
-# dist-dir added for CVS.
-dist-dir:
-	mkdir ${DISTDIR}
-	for i in `cd $(srcdir); echo ${DISTFILES}`; do \
-	  ln $(srcdir)/$${i} ${DISTDIR}; \
-	done
-.PHONY: dist-dir
-
-# ls added for CVS.
-ls:
-	@echo $(DISTFILES)
-.PHONY: ls
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:	
-	etags *.[ch]
-
-# Makefile target added for CVS.
-subdir = zlib
-Makefile: ../config.status Makefile.in
-	cd .. && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= ./config.status
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h  
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.msc b/gnu/usr.bin/cvs/zlib/Makefile.msc
deleted file mode 100644
index 112684af0f5..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.msc
+++ /dev/null
@@ -1,101 +0,0 @@
-# Makefile for zlib
-# Microsoft C 5.1 or later
-
-# To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=-AS
-
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Microsoft C 5.1 and later -------------
-MODEL=-AL
-CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
-#-Ox generates bad code with MSC 5.1
-CC=cl
-LD=link
-LDFLAGS=/e/st:0x1000/noe
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all:  zlib.lib example.exe minigzip.exe
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	if exist zlib.lib del zlib.lib
-	lib zlib $(OBJ1);
-	lib zlib $(OBJ2);
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj,,,zlib.lib;
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj,,,zlib.lib;
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.riscos b/gnu/usr.bin/cvs/zlib/Makefile.riscos
deleted file mode 100644
index 0f10aa8918c..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.riscos
+++ /dev/null
@@ -1,46 +0,0 @@
-# Project:   zlib_1_03
-
-
-# Toolflags:
-CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fnah 
-C++flags = -c -depend !Depend -IC: -throwback
-Linkflags = -aif -c++ -o $@ 
-ObjAsmflags = -throwback -NoCache -depend !Depend
-CMHGflags = 
-LibFileflags = -c -l -o $@ 
-Squeezeflags = -o $@
-
-
-# Final targets:
-@.zlib_lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
-        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
-        @.o.uncompress @.o.zutil 
-        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
-        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
-        @.o.trees @.o.uncompress @.o.zutil 
-@.test:   @.tests.minigzip @.tests.example 
-        echo Please run "Test" in directory tests 
-@.tests.minigzip:   @.o.minigzip @.zlib_lib C:o.Stubs 
-        Link $(Linkflags) @.o.minigzip @.zlib_lib C:o.Stubs 
-@.tests.example:   @.o.example @.zlib_lib C:o.Stubs 
-        Link $(Linkflags) @.o.example @.zlib_lib C:o.Stubs 
-
-
-# User-editable dependencies:
-.c.o:
-        cc $(ccflags) -o $@ $<
-
-# Static dependencies:
-@.o.example:   @.tests.c.example
-        cc $(ccflags) -o @.o.example @.tests.c.example 
-@.o.minigzip:   @.tests.c.minigzip
-        cc $(ccflags) -o @.o.minigzip @.tests.c.minigzip 
-
-
-# Dynamic dependencies:
-o.minigzip:	tests.c.minigzip
-o.minigzip:	h.zlib
-o.minigzip:	h.zconf
-o.example:	tests.c.example
-o.example:	h.zlib
-o.example:	h.zconf
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.sas b/gnu/usr.bin/cvs/zlib/Makefile.sas
deleted file mode 100644
index 5323e821708..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.sas
+++ /dev/null
@@ -1,64 +0,0 @@
-# SMakefile for zlib
-# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
-# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
-# Amiga, SAS/C 6.56 & Smake
-
-CC=sc
-CFLAGS=OPT
-#CFLAGS=OPT CPU=68030
-#CFLAGS=DEBUG=LINE
-LDFLAGS=LIB z.lib
-
-SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
-       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: SCOPTIONS example minigzip
-
-test: all
-	`cd`/example
-	echo hello world | minigzip | minigzip -d 
-
-install: z.lib
-	copy zlib.h zconf.h INCLUDE: clone
-	copy z.lib LIB: clone
-
-z.lib: $(OBJS)
-	oml z.lib r $(OBJS)
-
-example: example.o z.lib
-	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o z.lib
-	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
-
-clean:
-	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
-
-SCOPTIONS: Smakefile
-        copy to $@ <from <
-$(SCOPTIONS)
-<
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.tc b/gnu/usr.bin/cvs/zlib/Makefile.tc
deleted file mode 100644
index a46ce736783..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.tc
+++ /dev/null
@@ -1,105 +0,0 @@
-# Makefile for zlib
-# TurboC 2.0
-
-# To use, do "make -fmakefile.tc"
-# To compile in small model, set below: MODEL=-ms
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Turbo C 2.0 -------------
-MODEL=-ml
-# CFLAGS=-O2 -G -Z $(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z $(MODEL)
-CC=tcc -I\tc\include
-LD=tcc -L\tc\lib
-LIB=tlib
-LDFLAGS=$(MODEL) -f-
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	del zlib.lib
-	$(LIB) zlib +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) -eexample.exe example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj zlib.lib
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/Makefile.wat b/gnu/usr.bin/cvs/zlib/Makefile.wat
deleted file mode 100644
index 2a3b629d3df..00000000000
--- a/gnu/usr.bin/cvs/zlib/Makefile.wat
+++ /dev/null
@@ -1,103 +0,0 @@
-# Makefile for zlib
-# Watcom 10a
-
-# This version of the zlib makefile was adapted by Chris Young for use
-# with Watcom 10a 32-bit protected mode flat memory model.  It was created 
-# for use with POV-Ray ray tracer and you may choose to edit the CFLAGS to 
-# suit your needs but the -DMSDOS is required.
-# -- Chris Young 76702.1655@compuserve.com
-
-# To use, do "wmake -f makefile.wat"
-
-# See zconf.h for details about the memory requirements.
-
-# ------------- Watcom 10a -------------
-MODEL=-mf 
-CFLAGS= $(MODEL) -fpi87 -fp5 -zp4 -5r -w5 -oneatx -DMSDOS
-CC=wcc386
-LD=wcl386
-LIB=wlib -b -c 
-LDFLAGS= 
-O=.obj
-
-# variables
-OBJ1=adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) 
-OBJ2=trees$(O) zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) 
-OBJ3=infutil$(O) inffast$(O)
-OBJP1=adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)
-OBJP2=trees$(O)+zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)
-OBJP3=infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h &
-  infcodes.h infutil.h
-	$(CC) $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h &
-  infcodes.h inffast.h
-	$(CC) $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2) $(OBJ3) 
-	del zlib.lib
-	$(LIB) zlib.lib +$(OBJP1)
-	$(LIB) zlib.lib +$(OBJP2)
-	$(LIB) zlib.lib +$(OBJP3)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: minigzip.exe example.exe
-	example
-	echo hello world | minigzip | minigzip -d >test
-	type test
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/README b/gnu/usr.bin/cvs/zlib/README
deleted file mode 100644
index 28adc90b218..00000000000
--- a/gnu/usr.bin/cvs/zlib/README
+++ /dev/null
@@ -1,99 +0,0 @@
-zlib 1.0.4 is a general purpose data compression library.  All the code
-is reentrant (thread safe).  The data format used by the zlib library
-is described by RFCs (Request for Comments) 1950 to 1952 in the files 
-ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
-format) and rfc1952.txt (gzip format). These documents are also available in
-other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-
-All functions of the compression library are documented in the file
-zlib.h. A usage example of the library is given in the file example.c
-which also tests that the library is working correctly. Another
-example is given in the file minigzip.c. The compression library itself
-is composed of all source files except example.c and minigzip.c.
-
-To compile all files and run the test program, follow the instructions
-given at the top of Makefile. In short "make test; make install"
-should work for most machines.  For MSDOS, use one of the special
-makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms.
-
-Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov> or,
-if this fails, to the addresses given below in the Copyright section.
-The zlib home page is http://quest.jpl.nasa.gov/zlib/
-
-The changes made in version 1.0.4 are documented in the file ChangeLog.
-The main changes since 1.0.3 are:
-
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
-  bit, so the decompressor could decompress all the correct data but went
-  on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-
-
-A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
-is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
-
-
-Notes for some targets:
-
-- For Turbo C the small model is supported only with reduced performance to
-  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-
-- For 64-bit Iris, deflate.c must be compiled without any optimization.
-  With -O, one libpng test fails. The test works in 32 bit mode (with
-  the -32 compiler flag). The compiler bug has been reported to SGI.
-
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
-  it works when compiled with cc.
-
-- zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not
-  accepting the -O option). It works with the other cc compiler.
-
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
-  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
-  For help on building a zlib DLL, contact Alessandro Iacopetti
-  <iaco@email.alessandria.alpcom.it>  http://lisa.unial.it/iaco ,
-  or contact Brad Clarke <bclarke@cyberus.ca>.
-
-- gzdopen is not supported on RISCOS
-
-
-Acknowledgments:
-
-  The deflate format used by zlib was defined by Phil Katz. The deflate
-  and zlib specifications were written by Peter Deutsch. Thanks to all the
-  people who reported problems and suggested various improvements in zlib;
-  they are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
-If you use the zlib library in a product, we would appreciate *not*
-receiving lengthy legal documents to sign. The sources are provided
-for free but without warranty of any kind.  The library has been
-entirely written by Jean-loup Gailly and Mark Adler; it does not
-include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes.
diff --git a/gnu/usr.bin/cvs/zlib/adler32.c b/gnu/usr.bin/cvs/zlib/adler32.c
deleted file mode 100644
index e238a66ba3a..00000000000
--- a/gnu/usr.bin/cvs/zlib/adler32.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: adler32.c,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#include "zlib.h"
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-	    buf += 16;
-            k -= 16;
-        }
-        if (k != 0) do {
-            s1 += *buf++;
-	    s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
diff --git a/gnu/usr.bin/cvs/zlib/algorithm.txt b/gnu/usr.bin/cvs/zlib/algorithm.txt
deleted file mode 100644
index cdc830b5deb..00000000000
--- a/gnu/usr.bin/cvs/zlib/algorithm.txt
+++ /dev/null
@@ -1,213 +0,0 @@
-1. Compression algorithm (deflate)
-
-The deflation algorithm used by gzip (also zip and zlib) is a variation of
-LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
-the input data.  The second occurrence of a string is replaced by a
-pointer to the previous string, in the form of a pair (distance,
-length).  Distances are limited to 32K bytes, and lengths are limited
-to 258 bytes. When a string does not occur anywhere in the previous
-32K bytes, it is emitted as a sequence of literal bytes.  (In this
-description, `string' must be taken as an arbitrary sequence of bytes,
-and is not restricted to printable characters.)
-
-Literals or match lengths are compressed with one Huffman tree, and
-match distances are compressed with another tree. The trees are stored
-in a compact form at the start of each block. The blocks can have any
-size (except that the compressed data for one block must fit in
-available memory). A block is terminated when deflate() determines that
-it would be useful to start another block with fresh trees. (This is
-somewhat similar to the behavior of LZW-based _compress_.)
-
-Duplicated strings are found using a hash table. All input strings of
-length 3 are inserted in the hash table. A hash index is computed for
-the next 3 bytes. If the hash chain for this index is not empty, all
-strings in the chain are compared with the current input string, and
-the longest match is selected.
-
-The hash chains are searched starting with the most recent strings, to
-favor small distances and thus take advantage of the Huffman encoding.
-The hash chains are singly linked. There are no deletions from the
-hash chains, the algorithm simply discards matches that are too old.
-
-To avoid a worst-case situation, very long hash chains are arbitrarily
-truncated at a certain length, determined by a runtime option (level
-parameter of deflateInit). So deflate() does not always find the longest
-possible match but generally finds a match which is long enough.
-
-deflate() also defers the selection of matches with a lazy evaluation
-mechanism. After a match of length N has been found, deflate() searches for
-a longer match at the next input byte. If a longer match is found, the
-previous match is truncated to a length of one (thus producing a single
-literal byte) and the process of lazy evaluation begins again. Otherwise,
-the original match is kept, and the next match search is attempted only N
-steps later.
-
-The lazy match evaluation is also subject to a runtime parameter. If
-the current match is long enough, deflate() reduces the search for a longer
-match, thus speeding up the whole process. If compression ratio is more
-important than speed, deflate() attempts a complete second search even if
-the first match is already long enough.
-
-The lazy match evaluation is not performed for the fastest compression
-modes (level parameter 1 to 3). For these fast modes, new strings
-are inserted in the hash table only when no match was found, or
-when the match is not too long. This degrades the compression ratio
-but saves time since there are both fewer insertions and fewer searches.
-
-
-2. Decompression algorithm (inflate)
-
-2.1 Introduction
-
-The real question is, given a Huffman tree, how to decode fast.  The most
-important realization is that shorter codes are much more common than
-longer codes, so pay attention to decoding the short codes fast, and let
-the long codes take longer to decode.
-
-inflate() sets up a first level table that covers some number of bits of
-input less than the length of longest code.  It gets that many bits from the
-stream, and looks it up in the table.  The table will tell if the next
-code is that many bits or less and how many, and if it is, it will tell
-the value, else it will point to the next level table for which inflate()
-grabs more bits and tries to decode a longer code.
-
-How many bits to make the first lookup is a tradeoff between the time it
-takes to decode and the time it takes to build the table.  If building the
-table took no time (and if you had infinite memory), then there would only
-be a first level table to cover all the way to the longest code.  However,
-building the table ends up taking a lot longer for more bits since short
-codes are replicated many times in such a table.  What inflate() does is
-simply to make the number of bits in the first table a variable, and set it
-for the maximum speed.
-
-inflate() sends new trees relatively often, so it is possibly set for a
-smaller first level table than an application that has only one tree for
-all the data.  For inflate, which has 286 possible codes for the
-literal/length tree, the size of the first table is nine bits.  Also the
-distance trees have 30 possible values, and the size of the first table is
-six bits.  Note that for each of those cases, the table ended up one bit
-longer than the ``average'' code length, i.e. the code length of an
-approximately flat code which would be a little more than eight bits for
-286 symbols and a little less than five bits for 30 symbols.  It would be
-interesting to see if optimizing the first level table for other
-applications gave values within a bit or two of the flat code size.
-
-
-2.2 More details on the inflate table lookup
-
-Ok, you want to know what this cleverly obfuscated inflate tree actually  
-looks like.  You are correct that it's not a Huffman tree.  It is simply a  
-lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
-symbol could be as short as one bit or as long as 15 bits.  If a particular  
-symbol is shorter than nine bits, then that symbol's translation is duplicated
-in all those entries that start with that symbol's bits.  For example, if the  
-symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
-symbol is nine bits long, it appears in the table once.
-
-If the symbol is longer than nine bits, then that entry in the table points  
-to another similar table for the remaining bits.  Again, there are duplicated  
-entries as needed.  The idea is that most of the time the symbol will be short
-and there will only be one table look up.  (That's whole idea behind data  
-compression in the first place.)  For the less frequent long symbols, there  
-will be two lookups.  If you had a compression method with really long  
-symbols, you could have as many levels of lookups as is efficient.  For  
-inflate, two is enough.
-
-So a table entry either points to another table (in which case nine bits in  
-the above example are gobbled), or it contains the translation for the symbol  
-and the number of bits to gobble.  Then you start again with the next  
-ungobbled bit.
-
-You may wonder: why not just have one lookup table for how ever many bits the  
-longest symbol is?  The reason is that if you do that, you end up spending  
-more time filling in duplicate symbol entries than you do actually decoding.   
-At least for deflate's output that generates new trees every several 10's of  
-kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
-would take too long if you're only decoding several thousand symbols.  At the  
-other extreme, you could make a new table for every bit in the code.  In fact,
-that's essentially a Huffman tree.  But then you spend two much time  
-traversing the tree while decoding, even for short symbols.
-
-So the number of bits for the first lookup table is a trade of the time to  
-fill out the table vs. the time spent looking at the second level and above of
-the table.
-
-Here is an example, scaled down:
-
-The code being decoded, with 10 symbols, from 1 to 6 bits long:
-
-A: 0
-B: 10
-C: 1100
-D: 11010
-E: 11011
-F: 11100
-G: 11101
-H: 11110
-I: 111110
-J: 111111
-
-Let's make the first table three bits long (eight entries):
-
-000: A,1
-001: A,1
-010: A,1
-011: A,1
-100: B,2
-101: B,2
-110: -> table X (gobble 3 bits)
-111: -> table Y (gobble 3 bits)
-
-Each entry is what the bits decode to and how many bits that is, i.e. how  
-many bits to gobble.  Or the entry points to another table, with the number of
-bits to gobble implicit in the size of the table.
-
-Table X is two bits long since the longest code starting with 110 is five bits
-long:
-
-00: C,1
-01: C,1
-10: D,2
-11: E,2
-
-Table Y is three bits long since the longest code starting with 111 is six  
-bits long:
-
-000: F,2
-001: F,2
-010: G,2
-011: G,2
-100: H,2
-101: H,2
-110: I,3
-111: J,3
-
-So what we have here are three tables with a total of 20 entries that had to  
-be constructed.  That's compared to 64 entries for a single table.  Or  
-compared to 16 entries for a Huffman tree (six two entry tables and one four  
-entry table).  Assuming that the code ideally represents the probability of  
-the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
-to one lookup for the single table, or 1.66 lookups per symbol for the  
-Huffman tree.
-
-There, I think that gives you a picture of what's going on.  For inflate, the  
-meaning of a particular symbol is often more than just a letter.  It can be a  
-byte (a "literal"), or it can be either a length or a distance which  
-indicates a base value and a number of bits to fetch after the code that is  
-added to the base value.  Or it might be the special end-of-block code.  The  
-data structures created in inftrees.c try to encode all that information  
-compactly in the tables.
-
-
-Jean-loup Gailly        Mark Adler
-jloup@gzip.org          madler@alumni.caltech.edu
-
-
-References:
-
-[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
-Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
-pp. 337-343.
-
-``DEFLATE Compressed Data Format Specification'' available in
-ftp://ds.internic.net/rfc/rfc1951.txt
diff --git a/gnu/usr.bin/cvs/zlib/amiga/Makefile.pup b/gnu/usr.bin/cvs/zlib/amiga/Makefile.pup
deleted file mode 100644
index 6cfad1dc04a..00000000000
--- a/gnu/usr.bin/cvs/zlib/amiga/Makefile.pup
+++ /dev/null
@@ -1,66 +0,0 @@
-# Amiga powerUP (TM) Makefile
-# makefile for libpng and SAS C V6.58/7.00 PPC compiler
-# Copyright (C) 1998 by Andreas R. Kleinert
-
-CC       = scppc
-CFLAGS   = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
-           OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8
-LIBNAME  = libzip.a
-AR       = ppc-amigaos-ar
-AR_FLAGS = cr
-RANLIB   = ppc-amigaos-ranlib
-LDFLAGS  = -r -o
-LDLIBS   = LIB:scppc.a
-LN       = ppc-amigaos-ld
-RM       = delete quiet
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example minigzip
-
-test: all
-        example
-        echo hello world | minigzip | minigzip -d
-
-$(LIBNAME): $(OBJS)
-            $(AR) $(AR_FLAGS) $@ $(OBJS)
-            $(RANLIB) $@
-
-example: example.o $(LIBNAME)
-        $(LN) $(LDFLAGS) example LIB:c_ppc.o example.o $(LIBNAME) $(LDLIBS) LIB:end.o
-
-minigzip: minigzip.o $(LIBNAME)
-        $(LN) $(LDFLAGS) minigzip LIB:c_ppc.o minigzip.o $(LIBNAME) $(LDLIBS) LIB:end.o
-
-clean:
-        $(RM) *.o example minigzip $(LIBNAME) foo.gz
-
-zip:
-        zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
-          descrip.mms *.[ch]
-
-tgz:
-        cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
-          zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
diff --git a/gnu/usr.bin/cvs/zlib/amiga/Makefile.sas b/gnu/usr.bin/cvs/zlib/amiga/Makefile.sas
deleted file mode 100644
index 5323e821708..00000000000
--- a/gnu/usr.bin/cvs/zlib/amiga/Makefile.sas
+++ /dev/null
@@ -1,64 +0,0 @@
-# SMakefile for zlib
-# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
-# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
-# Amiga, SAS/C 6.56 & Smake
-
-CC=sc
-CFLAGS=OPT
-#CFLAGS=OPT CPU=68030
-#CFLAGS=DEBUG=LINE
-LDFLAGS=LIB z.lib
-
-SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
-       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: SCOPTIONS example minigzip
-
-test: all
-	`cd`/example
-	echo hello world | minigzip | minigzip -d 
-
-install: z.lib
-	copy zlib.h zconf.h INCLUDE: clone
-	copy z.lib LIB: clone
-
-z.lib: $(OBJS)
-	oml z.lib r $(OBJS)
-
-example: example.o z.lib
-	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o z.lib
-	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
-
-clean:
-	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
-
-SCOPTIONS: Smakefile
-        copy to $@ <from <
-$(SCOPTIONS)
-<
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h
diff --git a/gnu/usr.bin/cvs/zlib/compress.c b/gnu/usr.bin/cvs/zlib/compress.c
deleted file mode 100644
index 3fa29c67b0d..00000000000
--- a/gnu/usr.bin/cvs/zlib/compress.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: compress.c,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#include "zlib.h"
-
-/* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-int compress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    z_stream stream;
-    int err;
-
-    stream.next_in = (Bytef*)source;
-    stream.avail_in = (uInt)sourceLen;
-#ifdef MAXSEG_64K
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-#endif
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-    stream.opaque = (voidpf)0;
-
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
-    if (err != Z_OK) return err;
-
-    err = deflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        deflateEnd(&stream);
-        return err == Z_OK ? Z_BUF_ERROR : err;
-    }
-    *destLen = stream.total_out;
-
-    err = deflateEnd(&stream);
-    return err;
-}
diff --git a/gnu/usr.bin/cvs/zlib/configure b/gnu/usr.bin/cvs/zlib/configure
deleted file mode 100644
index a354e4cf407..00000000000
--- a/gnu/usr.bin/cvs/zlib/configure
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-# configure script for zlib. This script is needed only if
-# you wish to build a shared library and your system supports them,
-# of if you need special compiler, flags or install directory.
-# Otherwise, you can just use directly "make test; make install"
-#
-# To impose specific compiler or flags or install directory, use for example:
-#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
-# or for csh/tcsh users:
-#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
-# LDSHARED is the command to be used to create a shared library
-
-LIBS=libz.a
-VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
-AR=${AR-"ar rc"}
-RANLIB=${RANLIB-"ranlib"}
-prefix=${prefix-/usr/local}
-exec_prefix=${exec_prefix-$prefix}
-
-test -z "$CC" && echo Checking for gcc...
-test=ztest$$
-cat > $test.c <<EOF
-int hello() { printf("hello\n"); }
-EOF
-if test -z "$CC" && (gcc -c -O3 $test.c) 2>/dev/null; then
-  CC=gcc
-  SFLAGS=${CFLAGS-"-fPIC -O3"}
-  CFLAGS=${CFLAGS-"-O3"}
-  LDSHARED=${LDSHARED-"gcc -shared"}
-else
-  # find system name and corresponding cc options
-  CC=${CC-cc}
-  case `(uname -sr || echo unknown) 2>/dev/null` in
-  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
-             CFLAGS=${CFLAGS-"-fast -xcg89"}
-	     LDSHARED=${LDSHARED-"cc -G"};;
-  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
-	     CFLAGS=${CFLAGS-"-O2"}
-	     LDSHARED=${LDSHARED-"ld"};;
-  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
-	     CFLAGS=${CFLAGS-"-ansi -O2"}
-	     LDSHARED=${LDSHARED-"cc -shared"};;
-  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
-             CFLAGS=${CFLAGS-"-4 -O"}
-	     LDSHARED=${LDSHARED-"cc"}
-             RANLIB=${RANLIB-"true"}
-             AR="cc -A";;
-  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
-	     CFLAGS=${CFLAGS-"-O3"}
-	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
-  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
-	     CFLAGS=${CFLAGS-"-O"}
-	     LDSHARED=${LDSHARED-"ld -b"}
-	     SHAREDLIBS='libz.sl';;
-  # send working options for other systems to gzip@prep.ai.mit.edu
-  *)         SFLAGS=${CFLAGS-"-O"}
-	     CFLAGS=${CFLAGS-"-O"}
-	     LDSHARED=${LDSHARED-"cc -shared"};;
-  esac
-fi
-
-echo Checking for shared library support...
-# we must test in two steps (cc then ld), required at least on SunOS 4.x
-if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
-   test "`($LDSHARED -o $test.so $test.o) 2>&1`" = ""; then
-  CFLAGS="$SFLAGS"
-  LIBS='libz.so.$(VER)'
-  echo Building shared library libz.so.$VER with $CC.
-else
-  LDSHARED="$CC"
-  echo Building static library $LIBS version $VER with $CC.
-fi
-rm -f $test.[co] $test.so
-
-# udpate Makefile
-sed < Makefile.in "
-/^CC *=/s/=.*/=$CC/
-/^CFLAGS *=/s/=.*/=$CFLAGS/
-/^LDSHARED *=/s/=.*/=$LDSHARED/
-/^LIBS *=/s,=.*,=$LIBS,
-/^AR *=/s/=.*/=$AR/
-/^RANLIB *=/s,=.*,=$RANLIB,
-/^VER *=/s/=.*/=$VER/
-/^prefix *=/s,=.*,=$prefix,
-/^exec_prefix *=/s,=.*,=$exec_prefix,
-" > Makefile
diff --git a/gnu/usr.bin/cvs/zlib/contrib/README.contrib b/gnu/usr.bin/cvs/zlib/contrib/README.contrib
deleted file mode 100644
index 7ad191cf598..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/README.contrib
+++ /dev/null
@@ -1,34 +0,0 @@
-All files under this contrib directory are UNSUPPORTED. There were
-provided by users of zlib and were not tested by the authors of zlib.
-Use at your own risk. Please contact the authors of the contributions
-for help about these, not the zlib authors. Thanks.
-
-
-asm386/     by Gilles Vollant <info@winimage.com>
-	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
-
-asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
-        asm code for Pentium and Pentium Pro
-        See http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
-	Support for Delphi
-
-delphi2/     by Davide Moretti <dave@rimini.com>
-        Another support for C++Builder and Delphi
-
-minizip/    by Gilles Vollant <info@winimage.com>
-	Mini zip and unzip based on zlib
-        See http://www.winimage.com/zLibDll/unzip.html
-
-iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
-        A C++ I/O streams interface to the zlib gz* functions
-
-iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
-	Another C++ I/O streams interface
-
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
-	A very simple tar.gz file extractor using zlib
-
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB.
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32.asm b/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32.asm
deleted file mode 100644
index 28d527f47f8..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32.asm
+++ /dev/null
@@ -1,559 +0,0 @@
-;
-; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
-; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
-; File written by Gilles Vollant, by modifiying the longest_match
-;  from Jean-loup Gailly in deflate.c
-; It need wmask == 0x7fff
-;     (assembly code is faster with a fixed wmask)
-;
-; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
-;   I compile with : "ml /coff /Zi /c gvmat32.asm"
-;
-
-;uInt longest_match_7fff(s, cur_match)
-;    deflate_state *s;
-;    IPos cur_match;                             /* current match */
-
-        NbStack         equ     76
-        cur_match       equ     dword ptr[esp+NbStack-0]
-        str_s           equ     dword ptr[esp+NbStack-4]
-; 5 dword on top (ret,ebp,esi,edi,ebx)
-        adrret          equ     dword ptr[esp+NbStack-8]
-        pushebp         equ     dword ptr[esp+NbStack-12]
-        pushedi         equ     dword ptr[esp+NbStack-16]
-        pushesi         equ     dword ptr[esp+NbStack-20]
-        pushebx         equ     dword ptr[esp+NbStack-24]
-
-        chain_length    equ     dword ptr [esp+NbStack-28]
-        limit           equ     dword ptr [esp+NbStack-32]
-        best_len        equ     dword ptr [esp+NbStack-36]
-        window          equ     dword ptr [esp+NbStack-40]
-        prev            equ     dword ptr [esp+NbStack-44]
-        scan_start      equ      word ptr [esp+NbStack-48]
-        wmask           equ     dword ptr [esp+NbStack-52]
-        match_start_ptr equ     dword ptr [esp+NbStack-56]
-        nice_match      equ     dword ptr [esp+NbStack-60]
-        scan            equ     dword ptr [esp+NbStack-64]
-
-        windowlen       equ     dword ptr [esp+NbStack-68]
-        match_start     equ     dword ptr [esp+NbStack-72]
-        strend          equ     dword ptr [esp+NbStack-76]
-        NbStackAdd      equ     (NbStack-24)
-
-    .386p
-
-    name    gvmatch
-    .MODEL  FLAT
-
-
-
-;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
-;  in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, remove the +4).
-;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     70h+4
-    dep_window          equ     2ch+4
-    dep_strstart        equ     60h+4
-    dep_prev_length     equ     6ch+4
-    dep_nice_match      equ     84h+4
-    dep_w_size          equ     20h+4
-    dep_prev            equ     34h+4
-    dep_w_mask          equ     28h+4
-    dep_good_match      equ     80h+4
-    dep_match_start     equ     64h+4
-    dep_lookahead       equ     68h+4
-
-
-_TEXT                   segment
-
-IFDEF NOUNDERLINE
-                        public  longest_match_7fff
-;                        public  match_init
-ELSE
-                        public  _longest_match_7fff
-;                        public  _match_init
-ENDIF
-
-    MAX_MATCH           equ     258
-    MIN_MATCH           equ     3
-    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
-
-
-
-IFDEF NOUNDERLINE
-;match_init      proc near
-;                ret
-;match_init      endp
-ELSE
-;_match_init     proc near
-;                ret
-;_match_init     endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   proc near
-ELSE
-_longest_match_7fff  proc near
-ENDIF
-
-        mov     edx,[esp+4]
-
-
-
-        push    ebp
-        push    edi
-        push    esi
-        push    ebx
-
-        sub     esp,NbStackAdd
-
-; initialize or check the variables used in match.asm.
-        mov     ebp,edx
-
-; chain_length = s->max_chain_length
-; if (prev_length>=good_match) chain_length >>= 2
-        mov     edx,[ebp+dep_chain_length]
-        mov     ebx,[ebp+dep_prev_length]
-        cmp     [ebp+dep_good_match],ebx
-        ja      noshr
-        shr     edx,2
-noshr:
-; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
-        inc     edx
-        mov     edi,[ebp+dep_nice_match]
-        mov     chain_length,edx
-        mov     eax,[ebp+dep_lookahead]
-        cmp     eax,edi
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-        jae     nolookaheadnicematch
-        mov     edi,eax
-nolookaheadnicematch:
-; best_len = s->prev_length
-        mov     best_len,ebx
-
-; window = s->window
-        mov     esi,[ebp+dep_window]
-        mov     ecx,[ebp+dep_strstart]
-        mov     window,esi
-
-        mov     nice_match,edi
-; scan = window + strstart
-        add     esi,ecx
-        mov     scan,esi
-; dx = *window
-        mov     dx,word ptr [esi]
-; bx = *(window+best_len-1)
-        mov     bx,word ptr [esi+ebx-1]
-        add     esi,MAX_MATCH-1
-; scan_start = *scan
-        mov     scan_start,dx
-; strend = scan + MAX_MATCH-1
-        mov     strend,esi
-; bx = scan_end = *(window+best_len-1)
-
-;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;        s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-        mov     esi,[ebp+dep_w_size]
-        sub     esi,MIN_LOOKAHEAD
-; here esi = MAX_DIST(s)
-        sub     ecx,esi
-        ja      nodist
-        xor     ecx,ecx
-nodist:
-        mov     limit,ecx
-
-; prev = s->prev
-        mov     edx,[ebp+dep_prev]
-        mov     prev,edx
-
-;
-        mov     edx,dword ptr [ebp+dep_match_start]
-        mov     bp,scan_start
-        mov     eax,cur_match
-        mov     match_start,edx
-
-        mov     edx,window
-        mov     edi,edx
-        add     edi,best_len
-        mov     esi,prev
-        dec     edi
-; windowlen = window + best_len -1
-        mov     windowlen,edi
-
-        jmp     beginloop2
-        align   4
-
-; here, in the loop
-;       eax = ax = cur_match
-;       ecx = limit
-;        bx = scan_end
-;        bp = scan_start
-;       edi = windowlen (window + best_len -1)
-;       esi = prev
-
-
-;// here; chain_length <=16
-normalbeg0add16:
-        add     chain_length,16
-        jz      exitloop
-normalbeg0:
-        cmp     word ptr[edi+eax],bx
-        je      normalbeg2noroll
-rcontlabnoroll:
-; cur_match = prev[cur_match & wmask]
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-        cmp     ecx,eax
-        jnb     exitloop
-; if --chain_length != 0, go to exitloop
-        dec     chain_length
-        jnz     normalbeg0
-        jmp     exitloop
-
-normalbeg2noroll:
-; if (scan_start==*(cur_match+window)) goto normalbeg2
-        cmp     bp,word ptr[edx+eax]
-        jne     rcontlabnoroll
-        jmp     normalbeg2
-
-contloop3:
-        mov     edi,windowlen
-
-; cur_match = prev[cur_match & wmask]
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-        cmp     ecx,eax
-jnbexitloopshort1:
-        jnb     exitloop
-; if --chain_length != 0, go to exitloop
-
-
-; begin the main loop
-beginloop2:
-        sub     chain_length,16+1
-; if chain_length <=16, don't use the unrolled loop
-        jna     normalbeg0add16
-
-do16:
-        cmp     word ptr[edi+eax],bx
-        je      normalbeg2dc0
-
-maccn   MACRO   lab
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-        cmp     ecx,eax
-        jnb     exitloop
-        cmp     word ptr[edi+eax],bx
-        je      lab
-        ENDM
-
-rcontloop0:
-        maccn   normalbeg2dc1
-
-rcontloop1:
-        maccn   normalbeg2dc2
-
-rcontloop2:
-        maccn   normalbeg2dc3
-
-rcontloop3:
-        maccn   normalbeg2dc4
-
-rcontloop4:
-        maccn   normalbeg2dc5
-
-rcontloop5:
-        maccn   normalbeg2dc6
-
-rcontloop6:
-        maccn   normalbeg2dc7
-
-rcontloop7:
-        maccn   normalbeg2dc8
-
-rcontloop8:
-        maccn   normalbeg2dc9
-
-rcontloop9:
-        maccn   normalbeg2dc10
-
-rcontloop10:
-        maccn   short normalbeg2dc11
-
-rcontloop11:
-        maccn   short normalbeg2dc12
-
-rcontloop12:
-        maccn   short normalbeg2dc13
-
-rcontloop13:
-        maccn   short normalbeg2dc14
-
-rcontloop14:
-        maccn   short normalbeg2dc15
-
-rcontloop15:
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-        cmp     ecx,eax
-        jnb     exitloop
-
-        sub     chain_length,16
-        ja      do16
-        jmp     normalbeg0add16
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-normbeg MACRO   rcontlab,valsub
-; if we are here, we know that *(match+best_len-1) == scan_end
-        cmp     bp,word ptr[edx+eax]
-; if (match != scan_start) goto rcontlab
-        jne     rcontlab
-; calculate the good chain_length, and we'll compare scan and match string
-        add     chain_length,16-valsub
-        jmp     iseq
-        ENDM
-
-
-normalbeg2dc11:
-        normbeg rcontloop11,11
-
-normalbeg2dc12:
-        normbeg short rcontloop12,12
-
-normalbeg2dc13:
-        normbeg short rcontloop13,13
-
-normalbeg2dc14:
-        normbeg short rcontloop14,14
-
-normalbeg2dc15:
-        normbeg short rcontloop15,15
-
-normalbeg2dc10:
-        normbeg rcontloop10,10
-
-normalbeg2dc9:
-        normbeg rcontloop9,9
-
-normalbeg2dc8:
-        normbeg rcontloop8,8
-
-normalbeg2dc7:
-        normbeg rcontloop7,7
-
-normalbeg2dc6:
-        normbeg rcontloop6,6
-
-normalbeg2dc5:
-        normbeg rcontloop5,5
-
-normalbeg2dc4:
-        normbeg rcontloop4,4
-
-normalbeg2dc3:
-        normbeg rcontloop3,3
-
-normalbeg2dc2:
-        normbeg rcontloop2,2
-
-normalbeg2dc1:
-        normbeg rcontloop1,1
-
-normalbeg2dc0:
-        normbeg rcontloop0,0
-
-
-; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
-
-normalbeg2:
-        mov     edi,window
-
-        cmp     bp,word ptr[edi+eax]
-        jne     contloop3                   ; if *(ushf*)match != scan_start, continue
-
-iseq:
-; if we are here, we know that *(match+best_len-1) == scan_end
-; and (match == scan_start)
-
-        mov     edi,edx
-        mov     esi,scan                    ; esi = scan
-        add     edi,eax                     ; edi = window + cur_match = match
-
-        mov     edx,[esi+3]                 ; compare manually dword at match+3
-        xor     edx,[edi+3]                 ; and scan +3
-
-        jz      begincompare                ; if equal, go to long compare
-
-; we will determine the unmatch byte and calculate len (in esi)
-        or      dl,dl
-        je      eq1rr
-        mov     esi,3
-        jmp     trfinval
-eq1rr:
-        or      dx,dx
-        je      eq1
-
-        mov     esi,4
-        jmp     trfinval
-eq1:
-        and     edx,0ffffffh
-        jz      eq11
-        mov     esi,5
-        jmp     trfinval
-eq11:
-        mov     esi,6
-        jmp     trfinval
-
-begincompare:
-        ; here we now scan and match begin same
-        add     edi,6
-        add     esi,6
-        mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
-        repe    cmpsd                       ; loop until mismatch
-
-        je      trfin                       ; go to trfin if not unmatch
-; we determine the unmatch byte
-        sub     esi,4
-        mov     edx,[edi-4]
-        xor     edx,[esi]
-
-        or      dl,dl
-        jnz     trfin
-        inc     esi
-
-        or      dx,dx
-        jnz     trfin
-        inc     esi
-
-        and     edx,0ffffffh
-        jnz     trfin
-        inc     esi
-
-trfin:
-        sub     esi,scan          ; esi = len
-trfinval:
-; here we have finised compare, and esi contain len of equal string
-        cmp     esi,best_len        ; if len > best_len, go newbestlen
-        ja      short newbestlen
-; now we restore edx, ecx and esi, for the big loop
-        mov     esi,prev
-        mov     ecx,limit
-        mov     edx,window
-        jmp     contloop3
-
-newbestlen:
-        mov     best_len,esi        ; len become best_len
-
-        mov     match_start,eax     ; save new position as match_start
-        cmp     esi,nice_match      ; if best_len >= nice_match, exit
-        jae     exitloop
-        mov     ecx,scan
-        mov     edx,window          ; restore edx=window
-        add     ecx,esi
-        add     esi,edx
-
-        dec     esi
-        mov     windowlen,esi       ; windowlen = window + best_len-1
-        mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
-
-; now we restore ecx and esi, for the big loop :
-        mov     esi,prev
-        mov     ecx,limit
-        jmp     contloop3
-
-exitloop:
-; exit : s->match_start=match_start
-        mov     ebx,match_start
-        mov     ebp,str_s
-        mov     ecx,best_len
-        mov     dword ptr [ebp+dep_match_start],ebx        
-        mov     eax,dword ptr [ebp+dep_lookahead]
-        cmp     ecx,eax
-        ja      minexlo
-        mov     eax,ecx
-minexlo:
-; return min(best_len,s->lookahead)
-        
-; restore stack and register ebx,esi,edi,ebp
-        add     esp,NbStackAdd
-
-        pop     ebx
-        pop     esi
-        pop     edi
-        pop     ebp
-        ret
-InfoAuthor:
-; please don't remove this string !
-; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
-        db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
-
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   endp
-ELSE
-_longest_match_7fff  endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-cpudetect32     proc near
-ELSE
-_cpudetect32    proc near
-ENDIF
-
-
-	pushfd                  ; push original EFLAGS
-	pop     eax             ; get original EFLAGS
-	mov     ecx, eax        ; save original EFLAGS
-	xor     eax, 40000h     ; flip AC bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop     eax             ; store new EFLAGS in EAX
-	xor     eax, ecx        ; can’t toggle AC bit, processor=80386
-	jz      end_cpu_is_386  ; jump if 80386 processor
-	push    ecx
-	popfd                   ; restore AC bit in EFLAGS first
-
-	pushfd
-	pushfd
-	pop     ecx
-			
-	mov     eax, ecx        ; get original EFLAGS
-	xor     eax, 200000h    ; flip ID bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop		eax	            ; store new EFLAGS in EAX
-	popfd                   ; restore original EFLAGS
-	xor		eax, ecx        ; can’t toggle ID bit,
-	je		is_old_486		; processor=old
-
-	mov     eax,1
-	db      0fh,0a2h        ;CPUID   
-
-exitcpudetect:
-	ret
-
-end_cpu_is_386:
-	mov     eax,0300h
-	jmp     exitcpudetect
-
-is_old_486:
-	mov     eax,0400h
-	jmp     exitcpudetect
-
-IFDEF NOUNDERLINE
-cpudetect32     endp
-ELSE
-_cpudetect32    endp
-ENDIF
-
-_TEXT   ends
-end
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32c.c b/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32c.c
deleted file mode 100644
index d853bb7ce8a..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/gvmat32c.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
- * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
- * File written by Gilles Vollant, by modifiying the longest_match
- *  from Jean-loup Gailly in deflate.c
- *  it prepare all parameters and call the assembly longest_match_gvasm
- *  longest_match execute standard C code is wmask != 0x7fff
- *     (assembly code is faster with a fixed wmask)
- *
- */
-
-#include "deflate.h"
-
-#undef FAR
-#include <windows.h>
-
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
-/* if your C compiler don't add underline before function name,
-		define ADD_UNDERLINE_ASMFUNC */
-#ifdef ADD_UNDERLINE_ASMFUNC
-#define longest_match_7fff _longest_match_7fff
-#endif
-
-
-
-void match_init()
-{
-}
-
-unsigned long cpudetect32();
-
-uInt longest_match_c(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-uInt longest_match_7fff(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match(
-    deflate_state *s,
-    IPos cur_match)                             /* current match */
-{
-	static uInt iIsPPro=2;
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-	if (iIsPPro==2)
-		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
-
-	return longest_match_c(s,cur_match);
-}
-
-
-
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/mkgvmt32.bat b/gnu/usr.bin/cvs/zlib/contrib/asm386/mkgvmt32.bat
deleted file mode 100644
index 6c5ffd7a024..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/mkgvmt32.bat
+++ /dev/null
@@ -1 +0,0 @@
-c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.def b/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.def
deleted file mode 100644
index 7e9d60d55d9..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.def
+++ /dev/null
@@ -1,74 +0,0 @@
-LIBRARY		"zlib"
-
-DESCRIPTION	'"""zlib data compression library"""'
-
-
-VERSION		1.11
-
-
-HEAPSIZE	1048576,8192
-
-EXPORTS
-    adler32                        @1
-    compress                       @2
-    crc32                          @3
-    deflate                        @4
-    deflateCopy                    @5
-    deflateEnd                     @6
-    deflateInit2_                  @7
-    deflateInit_                   @8
-    deflateParams                  @9
-    deflateReset                   @10
-    deflateSetDictionary           @11
-    gzclose                        @12
-    gzdopen                        @13
-    gzerror                        @14
-    gzflush                        @15
-    gzopen                         @16
-    gzread                         @17
-    gzwrite                        @18
-    inflate                        @19
-    inflateEnd                     @20
-    inflateInit2_                  @21
-    inflateInit_                   @22
-    inflateReset                   @23
-    inflateSetDictionary           @24
-    inflateSync                    @25
-    uncompress                     @26
-    zlibVersion                    @27
-    gzprintf                       @28
-    gzputc                         @29
-    gzgetc                         @30
-    gzseek                         @31
-    gzrewind                       @32
-    gztell                         @33
-    gzeof                          @34
-    gzsetparams                    @35
-    zError                         @36
-    inflateSyncPoint               @37
-    get_crc_table                  @38
-    compress2                      @39
-    gzputs                         @40
-    gzgets                         @41
-
-	unzOpen                       @61
-	unzClose                      @62
-	unzGetGlobalInfo              @63
-	unzGetCurrentFileInfo         @64
-	unzGoToFirstFile              @65
-	unzGoToNextFile               @66
-	unzOpenCurrentFile            @67
-	unzReadCurrentFile            @68
-	unztell                       @70
-	unzeof                        @71
-	unzCloseCurrentFile           @72
-	unzGetGlobalComment           @73
-	unzStringFileNameCompare      @74
-	unzLocateFile                 @75
-	unzGetLocalExtrafield         @76
-
-	zipOpen                       @80
-	zipOpenNewFileInZip           @81
-	zipWriteInFileInZip           @82
-	zipCloseFileInZip             @83
-	zipClose                      @84
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsp b/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsp
deleted file mode 100644
index a70d4d4a6b0..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsp
+++ /dev/null
@@ -1,651 +0,0 @@
-# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
-
-CFG=zlibvc - Win32 Release
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
- "Win32 (ALPHA) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir ".\Release"
-# PROP BASE Intermediate_Dir ".\Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir ".\Release"
-# PROP Intermediate_Dir ".\Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir ".\Debug"
-# PROP BASE Intermediate_Dir ".\Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir ".\Debug"
-# PROP Intermediate_Dir ".\Debug"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "_DEBUG" /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "_DEBUG"
-# ADD RSC /l 0x40c /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc__"
-# PROP BASE Intermediate_Dir "zlibvc__"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc__"
-# PROP Intermediate_Dir "zlibvc__"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_0"
-# PROP BASE Intermediate_Dir "zlibvc_0"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_0"
-# PROP Intermediate_Dir "zlibvc_0"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_1"
-# PROP BASE Intermediate_Dir "zlibvc_1"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_1"
-# PROP Intermediate_Dir "zlibvc_1"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ENDIF 
-
-# Begin Target
-
-# Name "zlibvc - Win32 Release"
-# Name "zlibvc - Win32 Debug"
-# Name "zlibvc - Win32 ReleaseAxp"
-# Name "zlibvc - Win32 ReleaseWithoutAsm"
-# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
-# Begin Source File
-
-SOURCE=.\adler32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ADLER=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\compress.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_COMPR=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\crc32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_CRC32=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\deflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_DEFLA=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gvmat32c.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gzio.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_GZIO_=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFBL=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFCO=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFFA=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFLA=\
-	".\infblock.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFTR=\
-	".\inftrees.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFUT=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_TREES=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\uncompr.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_UNCOM=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\unzip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.rc
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlibvc.def
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ZUTIL=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
-# Begin Source File
-
-SOURCE=.\deflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsw b/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsw
deleted file mode 100644
index 493cd870365..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm386/zlibvc.dsw
+++ /dev/null
@@ -1,41 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 5.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm586/README.586 b/gnu/usr.bin/cvs/zlib/contrib/asm586/README.586
deleted file mode 100644
index 6bb78f32069..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm586/README.586
+++ /dev/null
@@ -1,43 +0,0 @@
-This is a patched version of zlib modified to use
-Pentium-optimized assembly code in the deflation algorithm. The files
-changed/added by this patch are:
-
-README.586
-match.S
-
-The effectiveness of these modifications is a bit marginal, as the the
-program's bottleneck seems to be mostly L1-cache contention, for which
-there is no real way to work around without rewriting the basic
-algorithm. The speedup on average is around 5-10% (which is generally
-less than the amount of variance between subsequent executions).
-However, when used at level 9 compression, the cache contention can
-drop enough for the assembly version to achieve 10-20% speedup (and
-sometimes more, depending on the amount of overall redundancy in the
-files). Even here, though, cache contention can still be the limiting
-factor, depending on the nature of the program using the zlib library.
-This may also mean that better improvements will be seen on a Pentium
-with MMX, which suffers much less from L1-cache contention, but I have
-not yet verified this.
-
-Note that this code has been tailored for the Pentium in particular,
-and will not perform well on the Pentium Pro (due to the use of a
-partial register in the inner loop).
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm586/match.S b/gnu/usr.bin/cvs/zlib/contrib/asm586/match.S
deleted file mode 100644
index 8f1614078f8..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm586/match.S
+++ /dev/null
@@ -1,354 +0,0 @@
-/* match.s -- Pentium-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	wmask			0	/* local copy of s->wmask	*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	chainlenscanend		12	/* high word: current chain len	*/
-					/* low word: last bytes sought	*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
- */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the scanend	*/
-/* scanend value, which it will always accompany.			*/
-
-		decl	%ebx
-		shll	$16, %ebx
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-
-		movw	(%edi), %bx
-		movw	%bx, scanstart(%esp)
-		movw	-1(%edi,%eax), %bx
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Posf *prev = s->prev;						*/
-/* uInt wmask = s->w_mask;						*/
-
-		movl	dsPrev(%edx), %edi
-		movl	dsWMask(%edx), %edx
-		mov	%edx, wmask(%esp)
-
-/* Jump into the main loop.						*/
-
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
- * %ecx = curmatch
- * %edx = curmatch & wmask
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- *
- * Two optimization notes on the choice of instructions:
- *
- * The first instruction uses a 16-bit address, which costs an extra,
- * unpairable cycle. This is cheaper than doing a 32-bit access and
- * zeroing the high word, due to the 3-cycle misalignment penalty which
- * would occur half the time. This also turns out to be cheaper than
- * doing two separate 8-bit accesses, as the memory is so rarely in the
- * L1 cache.
- *
- * The window buffer, however, apparently spends a lot of time in the
- * cache, and so it is faster to retrieve the word at the end of the
- * match string with two 8-bit loads. The instructions that test the
- * word at the beginning of the match string, however, are executed
- * much less frequently, and there it was cheaper to use 16-bit
- * instructions, which avoided the necessity of saving off and
- * subsequently reloading one of the other registers.
- */
-LookupLoop:
-							/* 1 U & V  */
-		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
-		movl	wmask(%esp), %edx		/* 2 V pipe */
-		cmpl	%ebp, %ecx			/* 3 U pipe */
-		jbe	LeaveNow			/* 3 V pipe */
-		subl	$0x00010000, %ebx		/* 4 U pipe */
-		js	LeaveNow			/* 4 V pipe */
-LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
-		andl	%ecx, %edx			/* 5 V pipe */
-		cmpb	%bl, %al			/* 6 U pipe */
-		jnz	LookupLoop			/* 6 V pipe */
-		movb	(%esi,%ecx), %ah
-		cmpb	%bh, %ah
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movw	(%eax,%ecx), %ax
-		cmpw	scanstart(%esp), %ax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		movl	(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		movl	4(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	chainlenscanend(%esp), %ebx
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movl	chainlenscanend(%esp), %ebx
-		movw	-1(%edi,%eax), %bx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, chainlenscanend(%esp)
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm686/README.686 b/gnu/usr.bin/cvs/zlib/contrib/asm686/README.686
deleted file mode 100644
index a593f23afd6..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm686/README.686
+++ /dev/null
@@ -1,34 +0,0 @@
-This is a patched version of zlib, modified to use
-Pentium-Pro-optimized assembly code in the deflation algorithm. The
-files changed/added by this patch are:
-
-README.686
-match.S
-
-The speedup that this patch provides varies, depending on whether the
-compiler used to build the original version of zlib falls afoul of the
-PPro's speed traps. My own tests show a speedup of around 10-20% at
-the default compression level, and 20-30% using -9, against a version
-compiled using gcc 2.7.2.3. Your mileage may vary.
-
-Note that this code has been tailored for the PPro/PII in particular,
-and will not perform particuarly well on a Pentium.
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o
diff --git a/gnu/usr.bin/cvs/zlib/contrib/asm686/match.S b/gnu/usr.bin/cvs/zlib/contrib/asm686/match.S
deleted file mode 100644
index 8e86c33c288..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/asm686/match.S
+++ /dev/null
@@ -1,327 +0,0 @@
-/* match.s -- Pentium-Pro-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	chainlenwmask		0	/* high word: current chain len	*/
-					/* low word: s->wmask		*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanend			12	/* last two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
- */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* uInt wmask = s->w_mask;						*/
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsWMask(%edx), %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the wmask	*/
-/* value, which it will always accompany.				*/
-
-		decl	%ebx
-		shll	$16, %ebx
-		orl	%eax, %ebx
-		movl	%ebx, chainlenwmask(%esp)
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-/* Posf *prev = s->prev;						*/
-
-		movzwl	(%edi), %ebx
-		movl	%ebx, scanstart(%esp)
-		movzwl	-1(%edi,%eax), %ebx
-		movl	%ebx, scanend(%esp)
-		movl	dsPrev(%edx), %edi
-
-/* Jump into the main loop.						*/
-
-		movl	chainlenwmask(%esp), %edx
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = scanend
- * %ecx = curmatch
- * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- */
-LookupLoop:
-		andl	%edx, %ecx
-		movzwl	(%edi,%ecx,2), %ecx
-		cmpl	%ebp, %ecx
-		jbe	LeaveNow
-		subl	$0x00010000, %edx
-		js	LeaveNow
-LoopEntry:	movzwl	-1(%esi,%ecx), %eax
-		cmpl	%ebx, %eax
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movzwl	(%eax,%ecx), %eax
-		cmpl	scanstart(%esp), %eax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%edx, chainlenwmask(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		xorl	(%edi,%edx), %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		xorl	4(%edi,%edx), %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	scanend(%esp), %ebx
-		movl	chainlenwmask(%esp), %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movzwl	-1(%edi,%eax), %ebx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, scanend(%esp)
-		movl	chainlenwmask(%esp), %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi/zlib.mak b/gnu/usr.bin/cvs/zlib/contrib/delphi/zlib.mak
deleted file mode 100644
index ba557e2b977..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi/zlib.mak
+++ /dev/null
@@ -1,36 +0,0 @@
-# Makefile for zlib32bd.lib
-# ------------- Borland C++ 4.5 -------------
-
-# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
-# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
-# convention.
-
-CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
-CC=f:\bc45\bin\bcc32
-LIBFLAGS= /C
-LIB=f:\bc45\bin\tlib
-ZLIB=zlib32bd.lib
-
-.autodepend
-.c.obj:
-        $(CC) -c $(CFLAGS) $<
-
-OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
-OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
-OBJ3=trees.obj uncompr.obj zutil.obj
-pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
-pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
-pOBJ3=+trees.obj+uncompr.obj+zutil.obj
-
-all: $(ZLIB)
-
-$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
-        @if exist $@ del $@
-        $(LIB) @&&|
-$@ $(LIBFLAGS) &
-$(pOBJ1) &
-$(pOBJ2) &
-$(pOBJ3)
-|
-
-# End of makefile for zlib32bd.lib
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi/zlibdef.pas b/gnu/usr.bin/cvs/zlib/contrib/delphi/zlibdef.pas
deleted file mode 100644
index 4f96b7d2c50..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi/zlibdef.pas
+++ /dev/null
@@ -1,169 +0,0 @@
-unit zlibdef;
-
-interface
-
-uses
-  Windows;
-
-const
-  ZLIB_VERSION = '1.1.3';
-
-type
-  voidpf = Pointer;
-  int    = Integer;
-  uInt   = Cardinal;
-  pBytef = PChar;
-  uLong  = Cardinal;
-
-  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
-                    stdcall;
-  free_func  = procedure(opaque, address: voidpf);
-                    stdcall;
-
-  internal_state = Pointer;
-
-  z_streamp = ^z_stream;
-  z_stream = packed record
-    next_in: pBytef;          // next input byte
-    avail_in: uInt;           // number of bytes available at next_in
-    total_in: uLong;          // total nb of input bytes read so far
-
-    next_out: pBytef;         // next output byte should be put there
-    avail_out: uInt;          // remaining free space at next_out
-    total_out: uLong;         // total nb of bytes output so far
-
-    msg: PChar;               // last error message, NULL if no error
-    state: internal_state;    // not visible by applications
-
-    zalloc: alloc_func;       // used to allocate the internal state
-    zfree: free_func;         // used to free the internal state
-    opaque: voidpf;           // private data object passed to zalloc and zfree
-
-    data_type: int;           // best guess about the data type: ascii or binary
-    adler: uLong;             // adler32 value of the uncompressed data
-    reserved: uLong;          // reserved for future use
-    end;
-
-const
-  Z_NO_FLUSH      = 0;
-  Z_SYNC_FLUSH    = 2;
-  Z_FULL_FLUSH    = 3;
-  Z_FINISH        = 4;
-
-  Z_OK            = 0;
-  Z_STREAM_END    = 1;
-
-  Z_NO_COMPRESSION         =  0;
-  Z_BEST_SPEED             =  1;
-  Z_BEST_COMPRESSION       =  9;
-  Z_DEFAULT_COMPRESSION    = -1;
-
-  Z_FILTERED            = 1;
-  Z_HUFFMAN_ONLY        = 2;
-  Z_DEFAULT_STRATEGY    = 0;
-
-  Z_BINARY   = 0;
-  Z_ASCII    = 1;
-  Z_UNKNOWN  = 2;
-
-  Z_DEFLATED    = 8;
-
-  MAX_MEM_LEVEL = 9;
-
-function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
-             stdcall;
-function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
-             stdcall;
-function deflate(strm: z_streamp; flush: int): int;
-             stdcall;
-function deflateCopy(dest, source: z_streamp): int;
-             stdcall;
-function deflateEnd(strm: z_streamp): int;
-             stdcall;
-function deflateInit2_(strm: z_streamp; level, method,
-                       windowBits, memLevel, strategy: int;
-                       const version: PChar; stream_size: int): int;
-             stdcall;
-function deflateInit_(strm: z_streamp; level: int;
-                      const version: PChar; stream_size: int): int;
-             stdcall;
-function deflateParams(strm: z_streamp; level, strategy: int): int;
-             stdcall;
-function deflateReset(strm: z_streamp): int;
-             stdcall;
-function deflateSetDictionary(strm: z_streamp;
-                              const dictionary: pBytef;
-                              dictLength: uInt): int;
-             stdcall;
-function inflate(strm: z_streamp; flush: int): int;
-             stdcall;
-function inflateEnd(strm: z_streamp): int;
-             stdcall;
-function inflateInit2_(strm: z_streamp; windowBits: int;
-                       const version: PChar; stream_size: int): int;
-             stdcall;
-function inflateInit_(strm: z_streamp; const version: PChar;
-                      stream_size: int): int;
-             stdcall;
-function inflateReset(strm: z_streamp): int;
-             stdcall;
-function inflateSetDictionary(strm: z_streamp;
-                              const dictionary: pBytef;
-                              dictLength: uInt): int;
-             stdcall;
-function inflateSync(strm: z_streamp): int;
-             stdcall;
-
-function deflateInit(strm: z_streamp; level: int): int;
-function deflateInit2(strm: z_streamp; level, method, windowBits,
-                      memLevel, strategy: int): int;
-function inflateInit(strm: z_streamp): int;
-function inflateInit2(strm: z_streamp; windowBits: int): int;
-
-implementation
-
-function deflateInit(strm: z_streamp; level: int): int;
-begin
-  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function deflateInit2(strm: z_streamp; level, method, windowBits,
-                      memLevel, strategy: int): int;
-begin
-  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
-                          strategy, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function inflateInit(strm: z_streamp): int;
-begin
-  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function inflateInit2(strm: z_streamp; windowBits: int): int;
-begin
-  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
-                          sizeof(z_stream));
-end;
-
-const
-  zlibDLL = 'png32bd.dll';
-
-function adler32; external zlibDLL;
-function crc32; external zlibDLL;
-function deflate; external zlibDLL;
-function deflateCopy; external zlibDLL;
-function deflateEnd; external zlibDLL;
-function deflateInit2_; external zlibDLL;
-function deflateInit_; external zlibDLL;
-function deflateParams; external zlibDLL;
-function deflateReset; external zlibDLL;
-function deflateSetDictionary; external zlibDLL;
-function inflate; external zlibDLL;
-function inflateEnd; external zlibDLL;
-function inflateInit2_; external zlibDLL;
-function inflateInit_; external zlibDLL;
-function inflateReset; external zlibDLL;
-function inflateSetDictionary; external zlibDLL;
-function inflateSync; external zlibDLL;
-
-end.
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.bpr b/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.bpr
deleted file mode 100644
index 78bb254088a..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.bpr
+++ /dev/null
@@ -1,224 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = d_zlib.lib
-OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
-  inflate.obj inftrees.obj infutil.obj trees.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = VCL35.lib
-SPARELIBS = VCL35.lib
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -O2 -Ve -d -k- -vi
-CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
-CFLAG3 = -ff -pr -5
-PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
-RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
-AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
-LFLAGS =
-IFLAGS = -g -Gn
-# ---------------------------------------------------------------------------
-ALLOBJ = c0w32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
-# ---------------------------------------------------------------------------
-!!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include
-Item1=$(BCB)\include;$(BCB)\include\vcl
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
- ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = TLib
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include;$(BCB)\include\vcl
-Item1=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.cpp b/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.cpp
deleted file mode 100644
index f5dea59b762..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/d_zlib.cpp
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <condefs.h>
-#pragma hdrstop
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("deflate.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-//---------------------------------------------------------------------------
-#define Library
-
-// To add a file to the library use the Project menu 'Add to Project'.
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/readme.txt b/gnu/usr.bin/cvs/zlib/contrib/delphi2/readme.txt
deleted file mode 100644
index cbd31620d87..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/readme.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-These are files used to compile zlib under Borland C++ Builder 3.
-
-zlib.bpg is the main project group that can be loaded in the BCB IDE and
-loads all other *.bpr projects
-
-zlib.bpr is a project used to create a static zlib.lib library with C calling
-convention for functions.
-
-zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
-calling convention.
-
-d_zlib.bpr creates a set of .obj files with register calling convention.
-These files are used by zlib.pas to create a Delphi unit containing zlib.
-The d_zlib.lib file generated isn't useful and can be deleted.
-
-zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpg b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpg
deleted file mode 100644
index b6c9acdf8c9..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpg
+++ /dev/null
@@ -1,26 +0,0 @@
-#------------------------------------------------------------------------------
-VERSION = BWS.01
-#------------------------------------------------------------------------------
-!ifndef ROOT
-ROOT = $(MAKEDIR)\..
-!endif
-#------------------------------------------------------------------------------
-MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
-DCC = $(ROOT)\bin\dcc32.exe $**
-BRCC = $(ROOT)\bin\brcc32.exe $**
-#------------------------------------------------------------------------------
-PROJECTS = zlib zlib32 d_zlib
-#------------------------------------------------------------------------------
-default: $(PROJECTS)
-#------------------------------------------------------------------------------
-
-zlib: zlib.bpr
-  $(MAKE)
-
-zlib32: zlib32.bpr
-  $(MAKE)
-
-d_zlib: d_zlib.bpr
-  $(MAKE)
-
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpr b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpr
deleted file mode 100644
index cf3945b2523..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.bpr
+++ /dev/null
@@ -1,225 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = zlib.lib
-OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
-  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
-  uncompr.obj zutil.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = VCL35.lib
-SPARELIBS = VCL35.lib
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -O2 -Ve -d -k- -vi
-CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
-CFLAG3 = -ff -5
-PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
-RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
-AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
-LFLAGS =
-IFLAGS = -g -Gn
-# ---------------------------------------------------------------------------
-ALLOBJ = c0w32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
-# ---------------------------------------------------------------------------
-!!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include
-Item1=$(BCB)\include;$(BCB)\include\vcl
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
- ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = TLib
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include;$(BCB)\include\vcl
-Item1=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.cpp b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.cpp
deleted file mode 100644
index bf6953ba198..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.cpp
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <condefs.h>
-#pragma hdrstop
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("compress.c");
-USEUNIT("crc32.c");
-USEUNIT("deflate.c");
-USEUNIT("gzio.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-USEUNIT("uncompr.c");
-USEUNIT("zutil.c");
-//---------------------------------------------------------------------------
-#define Library
-
-// To add a file to the library use the Project menu 'Add to Project'.
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.pas b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.pas
deleted file mode 100644
index 10ae4cae256..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib.pas
+++ /dev/null
@@ -1,534 +0,0 @@
-{*******************************************************}
-{                                                       }
-{       Delphi Supplemental Components                  }
-{       ZLIB Data Compression Interface Unit            }
-{                                                       }
-{       Copyright (c) 1997 Borland International        }
-{                                                       }
-{*******************************************************}
-
-{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
-
-unit zlib;
-
-interface
-
-uses Sysutils, Classes;
-
-type
-  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
-  TFree = procedure (AppData, Block: Pointer);
-
-  // Internal structure.  Ignore.
-  TZStreamRec = packed record
-    next_in: PChar;       // next input byte
-    avail_in: Integer;    // number of bytes available at next_in
-    total_in: Integer;    // total nb of input bytes read so far
-
-    next_out: PChar;      // next output byte should be put here
-    avail_out: Integer;   // remaining free space at next_out
-    total_out: Integer;   // total nb of bytes output so far
-
-    msg: PChar;           // last error message, NULL if no error
-    internal: Pointer;    // not visible by applications
-
-    zalloc: TAlloc;       // used to allocate the internal state
-    zfree: TFree;         // used to free the internal state
-    AppData: Pointer;     // private data object passed to zalloc and zfree
-
-    data_type: Integer;   //  best guess about the data type: ascii or binary
-    adler: Integer;       // adler32 value of the uncompressed data
-    reserved: Integer;    // reserved for future use
-  end;
-
-  // Abstract ancestor class
-  TCustomZlibStream = class(TStream)
-  private
-    FStrm: TStream;
-    FStrmPos: Integer;
-    FOnProgress: TNotifyEvent;
-    FZRec: TZStreamRec;
-    FBuffer: array [Word] of Char;
-  protected
-    procedure Progress(Sender: TObject); dynamic;
-    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
-    constructor Create(Strm: TStream);
-  end;
-
-{ TCompressionStream compresses data on the fly as data is written to it, and
-  stores the compressed data to another stream.
-
-  TCompressionStream is write-only and strictly sequential. Reading from the
-  stream will raise an exception. Using Seek to move the stream pointer
-  will raise an exception.
-
-  Output data is cached internally, written to the output stream only when
-  the internal output buffer is full.  All pending output data is flushed
-  when the stream is destroyed.
-
-  The Position property returns the number of uncompressed bytes of
-  data that have been written to the stream so far.
-
-  CompressionRate returns the on-the-fly percentage by which the original
-  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
-  If raw data size = 100 and compressed data size = 25, the CompressionRate
-  is 75%
-
-  The OnProgress event is called each time the output buffer is filled and
-  written to the output stream.  This is useful for updating a progress
-  indicator when you are writing a large chunk of data to the compression
-  stream in a single call.}
-
-
-  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
-
-  TCompressionStream = class(TCustomZlibStream)
-  private
-    function GetCompressionRate: Single;
-  public
-    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
-    destructor Destroy; override;
-    function Read(var Buffer; Count: Longint): Longint; override;
-    function Write(const Buffer; Count: Longint): Longint; override;
-    function Seek(Offset: Longint; Origin: Word): Longint; override;
-    property CompressionRate: Single read GetCompressionRate;
-    property OnProgress;
-  end;
-
-{ TDecompressionStream decompresses data on the fly as data is read from it.
-
-  Compressed data comes from a separate source stream.  TDecompressionStream
-  is read-only and unidirectional; you can seek forward in the stream, but not
-  backwards.  The special case of setting the stream position to zero is
-  allowed.  Seeking forward decompresses data until the requested position in
-  the uncompressed data has been reached.  Seeking backwards, seeking relative
-  to the end of the stream, requesting the size of the stream, and writing to
-  the stream will raise an exception.
-
-  The Position property returns the number of bytes of uncompressed data that
-  have been read from the stream so far.
-
-  The OnProgress event is called each time the internal input buffer of
-  compressed data is exhausted and the next block is read from the input stream.
-  This is useful for updating a progress indicator when you are reading a
-  large chunk of data from the decompression stream in a single call.}
-
-  TDecompressionStream = class(TCustomZlibStream)
-  public
-    constructor Create(Source: TStream);
-    destructor Destroy; override;
-    function Read(var Buffer; Count: Longint): Longint; override;
-    function Write(const Buffer; Count: Longint): Longint; override;
-    function Seek(Offset: Longint; Origin: Word): Longint; override;
-    property OnProgress;
-  end;
-
-
-
-{ CompressBuf compresses data, buffer to buffer, in one call.
-   In: InBuf = ptr to compressed data
-       InBytes = number of bytes in InBuf
-  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
-       OutBytes = number of bytes in OutBuf   }
-procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
-                      out OutBuf: Pointer; out OutBytes: Integer);
-
-
-{ DecompressBuf decompresses data, buffer to buffer, in one call.
-   In: InBuf = ptr to compressed data
-       InBytes = number of bytes in InBuf
-       OutEstimate = zero, or est. size of the decompressed data
-  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
-       OutBytes = number of bytes in OutBuf   }
-procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
- OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
-
-const
-  zlib_version = '1.1.3';
-
-type
-  EZlibError = class(Exception);
-  ECompressionError = class(EZlibError);
-  EDecompressionError = class(EZlibError);
-
-function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
-
-implementation
-
-const
-  Z_NO_FLUSH      = 0;
-  Z_PARTIAL_FLUSH = 1;
-  Z_SYNC_FLUSH    = 2;
-  Z_FULL_FLUSH    = 3;
-  Z_FINISH        = 4;
-
-  Z_OK            = 0;
-  Z_STREAM_END    = 1;
-  Z_NEED_DICT     = 2;
-  Z_ERRNO         = (-1);
-  Z_STREAM_ERROR  = (-2);
-  Z_DATA_ERROR    = (-3);
-  Z_MEM_ERROR     = (-4);
-  Z_BUF_ERROR     = (-5);
-  Z_VERSION_ERROR = (-6);
-
-  Z_NO_COMPRESSION       =   0;
-  Z_BEST_SPEED           =   1;
-  Z_BEST_COMPRESSION     =   9;
-  Z_DEFAULT_COMPRESSION  = (-1);
-
-  Z_FILTERED            = 1;
-  Z_HUFFMAN_ONLY        = 2;
-  Z_DEFAULT_STRATEGY    = 0;
-
-  Z_BINARY   = 0;
-  Z_ASCII    = 1;
-  Z_UNKNOWN  = 2;
-
-  Z_DEFLATED = 8;
-
-  _z_errmsg: array[0..9] of PChar = (
-    'need dictionary',      // Z_NEED_DICT      (2)
-    'stream end',           // Z_STREAM_END     (1)
-    '',                     // Z_OK             (0)
-    'file error',           // Z_ERRNO          (-1)
-    'stream error',         // Z_STREAM_ERROR   (-2)
-    'data error',           // Z_DATA_ERROR     (-3)
-    'insufficient memory',  // Z_MEM_ERROR      (-4)
-    'buffer error',         // Z_BUF_ERROR      (-5)
-    'incompatible version', // Z_VERSION_ERROR  (-6)
-    ''
-  );
-
-{$L deflate.obj}
-{$L inflate.obj}
-{$L inftrees.obj}
-{$L trees.obj}
-{$L adler32.obj}
-{$L infblock.obj}
-{$L infcodes.obj}
-{$L infutil.obj}
-{$L inffast.obj}
-
-procedure _tr_init; external;
-procedure _tr_tally; external;
-procedure _tr_flush_block; external;
-procedure _tr_align; external;
-procedure _tr_stored_block; external;
-function adler32; external;
-procedure inflate_blocks_new; external;
-procedure inflate_blocks; external;
-procedure inflate_blocks_reset; external;
-procedure inflate_blocks_free; external;
-procedure inflate_set_dictionary; external;
-procedure inflate_trees_bits; external;
-procedure inflate_trees_dynamic; external;
-procedure inflate_trees_fixed; external;
-procedure inflate_codes_new; external;
-procedure inflate_codes; external;
-procedure inflate_codes_free; external;
-procedure _inflate_mask; external;
-procedure inflate_flush; external;
-procedure inflate_fast; external;
-
-procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
-begin
-  FillChar(P^, count, B);
-end;
-
-procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
-begin
-  Move(source^, dest^, count);
-end;
-
-
-
-// deflate compresses data
-function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
-  recsize: Integer): Integer; external;
-function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
-function deflateEnd(var strm: TZStreamRec): Integer; external;
-
-// inflate decompresses data
-function inflateInit_(var strm: TZStreamRec; version: PChar;
-  recsize: Integer): Integer; external;
-function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
-function inflateEnd(var strm: TZStreamRec): Integer; external;
-function inflateReset(var strm: TZStreamRec): Integer; external;
-
-
-function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
-begin
-  GetMem(Result, Items*Size);
-end;
-
-procedure zcfree(AppData, Block: Pointer);
-begin
-  FreeMem(Block);
-end;
-
-function zlibCheck(code: Integer): Integer;
-begin
-  Result := code;
-  if code < 0 then
-    raise EZlibError.Create('error');    //!!
-end;
-
-function CCheck(code: Integer): Integer;
-begin
-  Result := code;
-  if code < 0 then
-    raise ECompressionError.Create('error'); //!!
-end;
-
-function DCheck(code: Integer): Integer;
-begin
-  Result := code;
-  if code < 0 then
-    raise EDecompressionError.Create('error');  //!!
-end;
-
-procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
-                      out OutBuf: Pointer; out OutBytes: Integer);
-var
-  strm: TZStreamRec;
-  P: Pointer;
-begin
-  FillChar(strm, sizeof(strm), 0);
-  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
-  GetMem(OutBuf, OutBytes);
-  try
-    strm.next_in := InBuf;
-    strm.avail_in := InBytes;
-    strm.next_out := OutBuf;
-    strm.avail_out := OutBytes;
-    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
-    try
-      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
-      begin
-        P := OutBuf;
-        Inc(OutBytes, 256);
-        ReallocMem(OutBuf, OutBytes);
-        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
-        strm.avail_out := 256;
-      end;
-    finally
-      CCheck(deflateEnd(strm));
-    end;
-    ReallocMem(OutBuf, strm.total_out);
-    OutBytes := strm.total_out;
-  except
-    FreeMem(OutBuf);
-    raise
-  end;
-end;
-
-
-procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
-  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
-var
-  strm: TZStreamRec;
-  P: Pointer;
-  BufInc: Integer;
-begin
-  FillChar(strm, sizeof(strm), 0);
-  BufInc := (InBytes + 255) and not 255;
-  if OutEstimate = 0 then
-    OutBytes := BufInc
-  else
-    OutBytes := OutEstimate;
-  GetMem(OutBuf, OutBytes);
-  try
-    strm.next_in := InBuf;
-    strm.avail_in := InBytes;
-    strm.next_out := OutBuf;
-    strm.avail_out := OutBytes;
-    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
-    try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
-      begin
-        P := OutBuf;
-        Inc(OutBytes, BufInc);
-        ReallocMem(OutBuf, OutBytes);
-        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
-        strm.avail_out := BufInc;
-      end;
-    finally
-      DCheck(inflateEnd(strm));
-    end;
-    ReallocMem(OutBuf, strm.total_out);
-    OutBytes := strm.total_out;
-  except
-    FreeMem(OutBuf);
-    raise
-  end;
-end;
-
-
-// TCustomZlibStream
-
-constructor TCustomZLibStream.Create(Strm: TStream);
-begin
-  inherited Create;
-  FStrm := Strm;
-  FStrmPos := Strm.Position;
-end;
-
-procedure TCustomZLibStream.Progress(Sender: TObject);
-begin
-  if Assigned(FOnProgress) then FOnProgress(Sender);
-end;
-
-
-// TCompressionStream
-
-constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
-  Dest: TStream);
-const
-  Levels: array [TCompressionLevel] of ShortInt =
-    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
-begin
-  inherited Create(Dest);
-  FZRec.next_out := FBuffer;
-  FZRec.avail_out := sizeof(FBuffer);
-  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
-end;
-
-destructor TCompressionStream.Destroy;
-begin
-  FZRec.next_in := nil;
-  FZRec.avail_in := 0;
-  try
-    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
-    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
-      and (FZRec.avail_out = 0) do
-    begin
-      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
-      FZRec.next_out := FBuffer;
-      FZRec.avail_out := sizeof(FBuffer);
-    end;
-    if FZRec.avail_out < sizeof(FBuffer) then
-      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
-  finally
-    deflateEnd(FZRec);
-  end;
-  inherited Destroy;
-end;
-
-function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
-begin
-  raise ECompressionError.Create('Invalid stream operation');
-end;
-
-function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
-begin
-  FZRec.next_in := @Buffer;
-  FZRec.avail_in := Count;
-  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
-  while (FZRec.avail_in > 0) do
-  begin
-    CCheck(deflate(FZRec, 0));
-    if FZRec.avail_out = 0 then
-    begin
-      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
-      FZRec.next_out := FBuffer;
-      FZRec.avail_out := sizeof(FBuffer);
-      FStrmPos := FStrm.Position;
-      Progress(Self);
-    end;
-  end;
-  Result := Count;
-end;
-
-function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
-begin
-  if (Offset = 0) and (Origin = soFromCurrent) then
-    Result := FZRec.total_in
-  else
-    raise ECompressionError.Create('Invalid stream operation');
-end;
-
-function TCompressionStream.GetCompressionRate: Single;
-begin
-  if FZRec.total_in = 0 then
-    Result := 0
-  else
-    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
-end;
-
-
-// TDecompressionStream
-
-constructor TDecompressionStream.Create(Source: TStream);
-begin
-  inherited Create(Source);
-  FZRec.next_in := FBuffer;
-  FZRec.avail_in := 0;
-  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
-end;
-
-destructor TDecompressionStream.Destroy;
-begin
-  inflateEnd(FZRec);
-  inherited Destroy;
-end;
-
-function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
-begin
-  FZRec.next_out := @Buffer;
-  FZRec.avail_out := Count;
-  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
-  while (FZRec.avail_out > 0) do
-  begin
-    if FZRec.avail_in = 0 then
-    begin
-      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
-      if FZRec.avail_in = 0 then
-        begin
-          Result := Count - FZRec.avail_out;
-          Exit;
-        end;
-      FZRec.next_in := FBuffer;
-      FStrmPos := FStrm.Position;
-      Progress(Self);
-    end;
-    DCheck(inflate(FZRec, 0));
-  end;
-  Result := Count;
-end;
-
-function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
-begin
-  raise EDecompressionError.Create('Invalid stream operation');
-end;
-
-function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
-var
-  I: Integer;
-  Buf: array [0..4095] of Char;
-begin
-  if (Offset = 0) and (Origin = soFromBeginning) then
-  begin
-    DCheck(inflateReset(FZRec));
-    FZRec.next_in := FBuffer;
-    FZRec.avail_in := 0;
-    FStrm.Position := 0;
-    FStrmPos := 0;
-  end
-  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
-          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
-  begin
-    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
-    if Offset > 0 then
-    begin
-      for I := 1 to Offset div sizeof(Buf) do
-        ReadBuffer(Buf, sizeof(Buf));
-      ReadBuffer(Buf, Offset mod sizeof(Buf));
-    end;
-  end
-  else
-    raise EDecompressionError.Create('Invalid stream operation');
-  Result := FZRec.total_out;
-end;
-
-end.
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.bpr b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.bpr
deleted file mode 100644
index cabcec44947..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.bpr
+++ /dev/null
@@ -1,174 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = zlib32.dll
-OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
-  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
-  uncompr.obj zutil.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = 
-SPARELIBS = 
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
-CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
-CFLAG3 = -ff -5
-PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
-  -JPHN -M
-RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
-AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
-LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
-IFLAGS = -Gn -g
-# ---------------------------------------------------------------------------
-ALLOBJ = c0d32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=1
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=DLL (GUI)
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=1
-Item0=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib
-
-[HistoryLists\hlConditionals]
-Count=1
-Item0=_NO_VCL;ZLIB_DLL
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-# ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = ilink32
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------
diff --git a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.cpp b/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.cpp
deleted file mode 100644
index 7372f6b985f..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/delphi2/zlib32.cpp
+++ /dev/null
@@ -1,42 +0,0 @@
-
-#include <windows.h>
-#pragma hdrstop
-#include <condefs.h>
-
-
-//---------------------------------------------------------------------------
-//   Important note about DLL memory management in a VCL DLL:
-//
-//
-//
-// If your DLL uses VCL and exports any functions that pass VCL String objects
-// (or structs/classes containing nested Strings) as parameter or function
-// results, you will need to build both your DLL project and any EXE projects
-// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
-// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
-// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
-// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
-// these situations, pass string information using "char *" or ShortString
-// parameters and then link with the static RTL.
-//
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("compress.c");
-USEUNIT("crc32.c");
-USEUNIT("deflate.c");
-USEUNIT("gzio.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-USEUNIT("uncompr.c");
-USEUNIT("zutil.c");
-//---------------------------------------------------------------------------
-#pragma argsused
-int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
-{
-        return 1;
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/iostream/test.cpp b/gnu/usr.bin/cvs/zlib/contrib/iostream/test.cpp
deleted file mode 100644
index 7d265b3b5c0..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/iostream/test.cpp
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#include "zfstream.h"
-
-int main() {
-
-  // Construct a stream object with this filebuffer.  Anything sent
-  // to this stream will go to standard out.
-  gzofstream os( 1, ios::out );
-
-  // This text is getting compressed and sent to stdout.
-  // To prove this, run 'test | zcat'.
-  os << "Hello, Mommy" << endl;
-
-  os << setcompressionlevel( Z_NO_COMPRESSION );
-  os << "hello, hello, hi, ho!" << endl;
-
-  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
-    << "I'm compressing again" << endl;
-
-  os.close();
-
-  return 0;
-
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.cpp b/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.cpp
deleted file mode 100644
index a690bbefceb..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.cpp
+++ /dev/null
@@ -1,329 +0,0 @@
-
-#include <memory.h>
-#include "zfstream.h"
-
-gzfilebuf::gzfilebuf() :
-  file(NULL),
-  mode(0),
-  own_file_descriptor(0)
-{ }
-
-gzfilebuf::~gzfilebuf() {
-
-  sync();
-  if ( own_file_descriptor )
-    close();
-
-}
-
-gzfilebuf *gzfilebuf::open( const char *name,
-			    int io_mode ) {
-
-  if ( is_open() )
-    return NULL;
-
-  char char_mode[10];
-  char *p;
-  memset(char_mode,'\0',10);
-  p = char_mode;
-
-  if ( io_mode & ios::in ) {
-    mode = ios::in;
-    *p++ = 'r';
-  } else if ( io_mode & ios::app ) {
-    mode = ios::app;
-    *p++ = 'a';
-  } else {
-    mode = ios::out;
-    *p++ = 'w';
-  }
-
-  if ( io_mode & ios::binary ) {
-    mode |= ios::binary;
-    *p++ = 'b';
-  }
-
-  // Hard code the compression level
-  if ( io_mode & (ios::out|ios::app )) {
-    *p++ = '9';
-  }
-
-  if ( (file = gzopen(name, char_mode)) == NULL )
-    return NULL;
-
-  own_file_descriptor = 1;
-
-  return this;
-
-}
-
-gzfilebuf *gzfilebuf::attach( int file_descriptor,
-			      int io_mode ) {
-
-  if ( is_open() )
-    return NULL;
-
-  char char_mode[10];
-  char *p;
-  memset(char_mode,'\0',10);
-  p = char_mode;
-
-  if ( io_mode & ios::in ) {
-    mode = ios::in;
-    *p++ = 'r';
-  } else if ( io_mode & ios::app ) {
-    mode = ios::app;
-    *p++ = 'a';
-  } else {
-    mode = ios::out;
-    *p++ = 'w';
-  }
-
-  if ( io_mode & ios::binary ) {
-    mode |= ios::binary;
-    *p++ = 'b';
-  }
-
-  // Hard code the compression level
-  if ( io_mode & (ios::out|ios::app )) {
-    *p++ = '9';
-  }
-
-  if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
-    return NULL;
-
-  own_file_descriptor = 0;
-
-  return this;
-
-}
-
-gzfilebuf *gzfilebuf::close() {
-
-  if ( is_open() ) {
-
-    sync();
-    gzclose( file );
-    file = NULL;
-
-  }
-
-  return this;
-
-}
-
-int gzfilebuf::setcompressionlevel( short comp_level ) {
-
-  return gzsetparams(file, comp_level, -2);
-
-}
-
-int gzfilebuf::setcompressionstrategy( short comp_strategy ) {
-
-  return gzsetparams(file, -2, comp_strategy);
-
-}
-
-
-streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
-
-  return streampos(EOF);
-
-}
-
-int gzfilebuf::underflow() {
-
-  // If the file hasn't been opened for reading, error.
-  if ( !is_open() || !(mode & ios::in) )
-    return EOF;
-
-  // if a buffer doesn't exists, allocate one.
-  if ( !base() ) {
-
-    if ( (allocate()) == EOF )
-      return EOF;
-    setp(0,0);
-
-  } else {
-
-    if ( in_avail() )
-      return (unsigned char) *gptr();
-
-    if ( out_waiting() ) {
-      if ( flushbuf() == EOF )
-	return EOF;
-    }
-
-  }
-
-  // Attempt to fill the buffer.
-
-  int result = fillbuf();
-  if ( result == EOF ) {
-    // disable get area
-    setg(0,0,0);
-    return EOF;
-  }
-
-  return (unsigned char) *gptr();
-
-}
-
-int gzfilebuf::overflow( int c ) {
-
-  if ( !is_open() || !(mode & ios::out) )
-    return EOF;
-
-  if ( !base() ) {
-    if ( allocate() == EOF )
-      return EOF;
-    setg(0,0,0);
-  } else {
-    if (in_avail()) {
-	return EOF;
-    }
-    if (out_waiting()) {
-      if (flushbuf() == EOF)
-	return EOF;
-    }
-  }
-
-  int bl = blen();
-  setp( base(), base() + bl);
-
-  if ( c != EOF ) {
-
-    *pptr() = c;
-    pbump(1);
-
-  }
-
-  return 0;
-
-}
-
-int gzfilebuf::sync() {
-
-  if ( !is_open() )
-    return EOF;
-
-  if ( out_waiting() )
-    return flushbuf();
-
-  return 0;
-
-}
-
-int gzfilebuf::flushbuf() {
-
-  int n;
-  char *q;
-
-  q = pbase();
-  n = pptr() - q;
-
-  if ( gzwrite( file, q, n) < n )
-    return EOF;
-
-  setp(0,0);
-
-  return 0;
-
-}
-
-int gzfilebuf::fillbuf() {
-
-  int required;
-  char *p;
-
-  p = base();
-
-  required = blen();
-
-  int t = gzread( file, p, required );
-
-  if ( t <= 0) return EOF;
-
-  setg( base(), base(), base()+t);
-
-  return t;
-
-}
-
-gzfilestream_common::gzfilestream_common() :
-  ios( gzfilestream_common::rdbuf() )
-{ }
-
-gzfilestream_common::~gzfilestream_common()
-{ }
-
-void gzfilestream_common::attach( int fd, int io_mode ) {
-
-  if ( !buffer.attach( fd, io_mode) )
-    clear( ios::failbit | ios::badbit );
-  else
-    clear();
-
-}
-
-void gzfilestream_common::open( const char *name, int io_mode ) {
-
-  if ( !buffer.open( name, io_mode ) )
-    clear( ios::failbit | ios::badbit );
-  else
-    clear();
-
-}
-
-void gzfilestream_common::close() {
-
-  if ( !buffer.close() )
-    clear( ios::failbit | ios::badbit );
-
-}
-
-gzfilebuf *gzfilestream_common::rdbuf() {
-
-  return &buffer;
-
-}
-     
-gzifstream::gzifstream() :
-  ios( gzfilestream_common::rdbuf() )
-{
-  clear( ios::badbit );
-}
-
-gzifstream::gzifstream( const char *name, int io_mode ) :
-  ios( gzfilestream_common::rdbuf() )
-{
-  gzfilestream_common::open( name, io_mode );
-}
-
-gzifstream::gzifstream( int fd, int io_mode ) :
-  ios( gzfilestream_common::rdbuf() )
-{
-  gzfilestream_common::attach( fd, io_mode );
-}
-
-gzifstream::~gzifstream() { }
-
-gzofstream::gzofstream() :
-  ios( gzfilestream_common::rdbuf() )
-{
-  clear( ios::badbit );
-}
-
-gzofstream::gzofstream( const char *name, int io_mode ) :
-  ios( gzfilestream_common::rdbuf() )
-{
-  gzfilestream_common::open( name, io_mode );
-}
-
-gzofstream::gzofstream( int fd, int io_mode ) :
-  ios( gzfilestream_common::rdbuf() )
-{
-  gzfilestream_common::attach( fd, io_mode );
-}
-
-gzofstream::~gzofstream() { }
diff --git a/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.h b/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.h
deleted file mode 100644
index c87fa08e9d1..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/iostream/zfstream.h
+++ /dev/null
@@ -1,142 +0,0 @@
-
-#ifndef _zfstream_h
-#define _zfstream_h
-
-#include <fstream.h>
-#include "zlib.h"
-
-class gzfilebuf : public streambuf {
-
-public:
-
-  gzfilebuf( );
-  virtual ~gzfilebuf();
-
-  gzfilebuf *open( const char *name, int io_mode );
-  gzfilebuf *attach( int file_descriptor, int io_mode );
-  gzfilebuf *close();
-
-  int setcompressionlevel( short comp_level );
-  int setcompressionstrategy( short comp_strategy );
-
-  inline int is_open() const { return (file !=NULL); }
-
-  virtual streampos seekoff( streamoff, ios::seek_dir, int );
-
-  virtual int sync();
-
-protected:
-
-  virtual int underflow();
-  virtual int overflow( int = EOF );
-
-private:
-
-  gzFile file;
-  short mode;
-  short own_file_descriptor;
-
-  int flushbuf();
-  int fillbuf();
-
-};
-
-class gzfilestream_common : virtual public ios {
-
-  friend class gzifstream;
-  friend class gzofstream;
-  friend gzofstream &setcompressionlevel( gzofstream &, int );
-  friend gzofstream &setcompressionstrategy( gzofstream &, int );
-
-public:
-  virtual ~gzfilestream_common();
-
-  void attach( int fd, int io_mode );
-  void open( const char *name, int io_mode );
-  void close();
-
-protected:
-  gzfilestream_common();
-
-private:
-  gzfilebuf *rdbuf();
-
-  gzfilebuf buffer;
-
-};
-
-class gzifstream : public gzfilestream_common, public istream {
-
-public:
-
-  gzifstream();
-  gzifstream( const char *name, int io_mode = ios::in );
-  gzifstream( int fd, int io_mode = ios::in );
-
-  virtual ~gzifstream();
-
-};
-
-class gzofstream : public gzfilestream_common, public ostream {
-
-public:
-
-  gzofstream();
-  gzofstream( const char *name, int io_mode = ios::out );
-  gzofstream( int fd, int io_mode = ios::out );
-
-  virtual ~gzofstream();
-
-};
-
-template<class T> class gzomanip {
-  friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
-public:
-  gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
-private:
-  gzofstream &(*func)(gzofstream &, T);
-  T val;
-};
-
-template<class T> gzofstream &operator<<(gzofstream &s,
-					 const gzomanip<T> &m) {
-  return (*m.func)(s, m.val);
-  
-}
-
-inline gzofstream &setcompressionlevel( gzofstream &s, int l ) {
-  (s.rdbuf())->setcompressionlevel(l);
-  return s;
-}
-
-inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) {
-  (s.rdbuf())->setcompressionstrategy(l);
-  return s;
-}
-
-inline gzomanip<int> setcompressionlevel(int l)
-{
-  return gzomanip<int>(&setcompressionlevel,l);
-}
-
-inline gzomanip<int> setcompressionstrategy(int l)
-{
-  return gzomanip<int>(&setcompressionstrategy,l);
-}
-
-#endif
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream.h b/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream.h
deleted file mode 100644
index 2e13400db9b..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- *
- * Copyright (c) 1997
- * Christian Michelsen Research AS
- * Advanced Computing
- * Fantoftvegen 38, 5036 BERGEN, Norway
- * http://www.cmr.no
- *
- * Permission to use, copy, modify, distribute and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and
- * that both that copyright notice and this permission notice appear
- * in supporting documentation.  Christian Michelsen Research AS makes no
- * representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied warranty.
- *
- */
-
-#ifndef ZSTREAM__H
-#define ZSTREAM__H
-
-/*
- * zstream.h - C++ interface to the 'zlib' general purpose compression library
- * $Id: zstream.h,v 1.1 2001/09/28 22:45:41 tholo Exp $
- */
-
-#include <strstream.h>
-#include <string.h>
-#include <stdio.h>
-#include "zlib.h"
-
-#if defined(_WIN32)
-#   include <fcntl.h>
-#   include <io.h>
-#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#   define SET_BINARY_MODE(file)
-#endif
-
-class zstringlen {
-public:
-    zstringlen(class izstream&);
-    zstringlen(class ozstream&, const char*);
-    size_t value() const { return val.word; }
-private:
-    struct Val { unsigned char byte; size_t word; } val;
-};
-
-//  ----------------------------- izstream -----------------------------
-
-class izstream
-{
-    public:
-        izstream() : m_fp(0) {}
-        izstream(FILE* fp) : m_fp(0) { open(fp); }
-        izstream(const char* name) : m_fp(0) { open(name); }
-        ~izstream() { close(); }
-
-        /* Opens a gzip (.gz) file for reading.
-         * open() can be used to read a file which is not in gzip format;
-         * in this case read() will directly read from the file without
-         * decompression. errno can be checked to distinguish two error
-         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
-         */
-        void open(const char* name) {
-            if (m_fp) close();
-            m_fp = ::gzopen(name, "rb");
-        }
-
-        void open(FILE* fp) {
-            SET_BINARY_MODE(fp);
-            if (m_fp) close();
-            m_fp = ::gzdopen(fileno(fp), "rb");
-        }
-
-        /* Flushes all pending input if necessary, closes the compressed file
-         * and deallocates all the (de)compression state. The return value is
-         * the zlib error number (see function error() below).
-         */
-        int close() {
-            int r = ::gzclose(m_fp);
-            m_fp = 0; return r;
-        }
-
-        /* Binary read the given number of bytes from the compressed file.
-         */
-        int read(void* buf, size_t len) {
-            return ::gzread(m_fp, buf, len);
-        }
-
-        /* Returns the error message for the last error which occurred on the
-         * given compressed file. errnum is set to zlib error number. If an
-         * error occurred in the file system and not in the compression library,
-         * errnum is set to Z_ERRNO and the application may consult errno
-         * to get the exact error code.
-         */
-        const char* error(int* errnum) {
-            return ::gzerror(m_fp, errnum);
-        }
-
-        gzFile fp() { return m_fp; }
-
-    private:
-        gzFile m_fp;
-};
-
-/*
- * Binary read the given (array of) object(s) from the compressed file.
- * If the input file was not in gzip format, read() copies the objects number
- * of bytes into the buffer.
- * returns the number of uncompressed bytes actually read
- * (0 for end of file, -1 for error).
- */
-template <class T, class Items>
-inline int read(izstream& zs, T* x, Items items) {
-    return ::gzread(zs.fp(), x, items*sizeof(T));
-}
-
-/*
- * Binary input with the '>' operator.
- */
-template <class T>
-inline izstream& operator>(izstream& zs, T& x) {
-    ::gzread(zs.fp(), &x, sizeof(T));
-    return zs;
-}
-
-
-inline zstringlen::zstringlen(izstream& zs) {
-    zs > val.byte;
-    if (val.byte == 255) zs > val.word;
-    else val.word = val.byte;
-}
-
-/*
- * Read length of string + the string with the '>' operator.
- */
-inline izstream& operator>(izstream& zs, char* x) {
-    zstringlen len(zs);
-    ::gzread(zs.fp(), x, len.value());
-    x[len.value()] = '\0';
-    return zs;
-}
-
-inline char* read_string(izstream& zs) {
-    zstringlen len(zs);
-    char* x = new char[len.value()+1];
-    ::gzread(zs.fp(), x, len.value());
-    x[len.value()] = '\0';
-    return x;
-}
-
-// ----------------------------- ozstream -----------------------------
-
-class ozstream
-{
-    public:
-        ozstream() : m_fp(0), m_os(0) {
-        }
-        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
-            : m_fp(0), m_os(0) {
-            open(fp, level);
-        }
-        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
-            : m_fp(0), m_os(0) {
-            open(name, level);
-        }
-        ~ozstream() {
-            close();
-        }
-
-        /* Opens a gzip (.gz) file for writing.
-         * The compression level parameter should be in 0..9
-         * errno can be checked to distinguish two error cases
-         * (if errno is zero, the zlib error is Z_MEM_ERROR).
-         */
-        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
-            char mode[4] = "wb\0";
-            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
-            if (m_fp) close();
-            m_fp = ::gzopen(name, mode);
-        }
-
-        /* open from a FILE pointer.
-         */
-        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
-            SET_BINARY_MODE(fp);
-            char mode[4] = "wb\0";
-            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
-            if (m_fp) close();
-            m_fp = ::gzdopen(fileno(fp), mode);
-        }
-
-        /* Flushes all pending output if necessary, closes the compressed file
-         * and deallocates all the (de)compression state. The return value is
-         * the zlib error number (see function error() below).
-         */
-        int close() {
-            if (m_os) {
-                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
-                delete[] m_os->str(); delete m_os; m_os = 0;
-            }
-            int r = ::gzclose(m_fp); m_fp = 0; return r;
-        }
-
-        /* Binary write the given number of bytes into the compressed file.
-         */
-        int write(const void* buf, size_t len) {
-            return ::gzwrite(m_fp, (voidp) buf, len);
-        }
-
-        /* Flushes all pending output into the compressed file. The parameter
-         * _flush is as in the deflate() function. The return value is the zlib
-         * error number (see function gzerror below). flush() returns Z_OK if
-         * the flush_ parameter is Z_FINISH and all output could be flushed.
-         * flush() should be called only when strictly necessary because it can
-         * degrade compression.
-         */
-        int flush(int _flush) {
-            os_flush();
-            return ::gzflush(m_fp, _flush);
-        }
-
-        /* Returns the error message for the last error which occurred on the
-         * given compressed file. errnum is set to zlib error number. If an
-         * error occurred in the file system and not in the compression library,
-         * errnum is set to Z_ERRNO and the application may consult errno
-         * to get the exact error code.
-         */
-        const char* error(int* errnum) {
-            return ::gzerror(m_fp, errnum);
-        }
-
-        gzFile fp() { return m_fp; }
-
-        ostream& os() {
-            if (m_os == 0) m_os = new ostrstream;
-            return *m_os;
-        }
-
-        void os_flush() {
-            if (m_os && m_os->pcount()>0) {
-                ostrstream* oss = new ostrstream;
-                oss->fill(m_os->fill());
-                oss->flags(m_os->flags());
-                oss->precision(m_os->precision());
-                oss->width(m_os->width());
-                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
-                delete[] m_os->str(); delete m_os; m_os = oss;
-            }
-        }
-
-    private:
-        gzFile m_fp;
-        ostrstream* m_os;
-};
-
-/*
- * Binary write the given (array of) object(s) into the compressed file.
- * returns the number of uncompressed bytes actually written
- * (0 in case of error).
- */
-template <class T, class Items>
-inline int write(ozstream& zs, const T* x, Items items) {
-    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
-}
-
-/*
- * Binary output with the '<' operator.
- */
-template <class T>
-inline ozstream& operator<(ozstream& zs, const T& x) {
-    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
-    return zs;
-}
-
-inline zstringlen::zstringlen(ozstream& zs, const char* x) {
-    val.byte = 255;  val.word = ::strlen(x);
-    if (val.word < 255) zs < (val.byte = val.word);
-    else zs < val;
-}
-
-/*
- * Write length of string + the string with the '<' operator.
- */
-inline ozstream& operator<(ozstream& zs, const char* x) {
-    zstringlen len(zs, x);
-    ::gzwrite(zs.fp(), (voidp) x, len.value());
-    return zs;
-}
-
-#ifdef _MSC_VER
-inline ozstream& operator<(ozstream& zs, char* const& x) {
-    return zs < (const char*) x;
-}
-#endif
-
-/*
- * Ascii write with the << operator;
- */
-template <class T>
-inline ostream& operator<<(ozstream& zs, const T& x) {
-    zs.os_flush();
-    return zs.os() << x;
-}
-
-#endif
diff --git a/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream_test.cpp b/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream_test.cpp
deleted file mode 100644
index 5bbd56c3ad8..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/iostream2/zstream_test.cpp
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "zstream.h"
-#include <math.h>
-#include <stdlib.h>
-#include <iomanip.h>
-
-void main() {
-	char h[256] = "Hello";
-	char* g = "Goodbye";
-	ozstream out("temp.gz");
-    out < "This works well" < h < g;
-    out.close();
-
-    izstream in("temp.gz"); // read it back
-    char *x = read_string(in), *y = new char[256], z[256];
-    in > y > z;
-    in.close();
-    cout << x << endl << y << endl << z << endl;
-
-    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
-    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
-    out << z << endl << y << endl << x << endl;
-    out << 1.1234567890123456789 << endl;
-
-    delete[] x; delete[] y;
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/ChangeLogUnzip b/gnu/usr.bin/cvs/zlib/contrib/minizip/ChangeLogUnzip
deleted file mode 100644
index 9987c543cdc..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/ChangeLogUnzip
+++ /dev/null
@@ -1,38 +0,0 @@
-Change in 0.15: (19 Mar 98)
-- fix memory leak in minizip.c
-
-Change in 0.14: (10 Mar 98)
-- fix bugs in minizip.c sample for zipping big file
-- fix problem in month in date handling
-- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for 
-    comment handling
-
-Change in 0.13: (6 Mar 98)
-- fix bugs in zip.c
-- add real minizip sample
-
-Change in 0.12: (4 Mar 98)
-- add zip.c and zip.h for creates .zip file
-- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
-- fix miniunz.c for file without specific record for directory
-
-Change in 0.11: (3 Mar 98)
-- fix bug in unzGetCurrentFileInfo for get extra field and comment
-- enhance miniunz sample, remove the bad unztst.c sample
-
-Change in 0.10: (2 Mar 98)
-- fix bug in unzReadCurrentFile
-- rename unzip* to unz* function and structure
-- remove Windows-like hungary notation variable name
-- modify some structure in unzip.h
-- add somes comment in source
-- remove unzipGetcCurrentFile function
-- replace ZUNZEXPORT by ZEXPORT
-- add unzGetLocalExtrafield for get the local extrafield info
-- add a new sample, miniunz.c
-
-Change in 0.4: (25 Feb 98)
-- suppress the type unzipFileInZip. 
-  Only on file in the zipfile can be open at the same time
-- fix somes typo in code
-- added tm_unz structure in unzip_file_info (date/time in readable format)
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/Makefile b/gnu/usr.bin/cvs/zlib/contrib/minizip/Makefile
deleted file mode 100644
index a1dfc161437..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-CC=cc
-CFLAGS=-O -I../..
-
-UNZ_OBJS = miniunz.o unzip.o ../../libz.a
-ZIP_OBJS = minizip.o zip.o   ../../libz.a
-
-.c.o:
-	$(CC) -c $(CFLAGS) $*.c
-
-all: miniunz minizip
-
-miniunz:  $(UNZ_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
-
-minizip:  $(ZIP_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
-
-test:	miniunz minizip
-	./minizip test readme.txt
-	./miniunz -l test.zip
-	mv readme.txt readme.old
-	./miniunz test.zip
-
-clean:
-	/bin/rm -f *.o *~ minizip miniunz
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/miniunz.c b/gnu/usr.bin/cvs/zlib/contrib/minizip/miniunz.c
deleted file mode 100644
index f3b7832878f..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/miniunz.c
+++ /dev/null
@@ -1,508 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include <fcntl.h>
-
-#ifdef unix
-# include <unistd.h>
-# include <utime.h>
-#else
-# include <direct.h>
-# include <io.h>
-#endif
-
-#include "unzip.h"
-
-#define CASESENSITIVITY (0)
-#define WRITEBUFFERSIZE (8192)
-
-/*
-  mini unzip, demo of unzip package
-
-  usage :
-  Usage : miniunz [-exvlo] file.zip [file_to_extract]
-
-  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
-    if it exists
-*/
-
-
-/* change_file_date : change the date/time of a file
-    filename : the filename of the file where date/time must be modified
-    dosdate : the new date at the MSDos format (4 bytes)
-    tmu_date : the SAME new date at the tm_unz format */
-void change_file_date(filename,dosdate,tmu_date)
-	const char *filename;
-	uLong dosdate;
-	tm_unz tmu_date;
-{
-#ifdef WIN32
-  HANDLE hFile;
-  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
-
-  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
-                      0,NULL,OPEN_EXISTING,0,NULL);
-  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
-  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
-  LocalFileTimeToFileTime(&ftLocal,&ftm);
-  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
-  CloseHandle(hFile);
-#else
-#ifdef unix
-  struct utimbuf ut;
-  struct tm newdate;
-  newdate.tm_sec = tmu_date.tm_sec;
-  newdate.tm_min=tmu_date.tm_min;
-  newdate.tm_hour=tmu_date.tm_hour;
-  newdate.tm_mday=tmu_date.tm_mday;
-  newdate.tm_mon=tmu_date.tm_mon;
-  if (tmu_date.tm_year > 1900)
-      newdate.tm_year=tmu_date.tm_year - 1900;
-  else
-      newdate.tm_year=tmu_date.tm_year ;
-  newdate.tm_isdst=-1;
-
-  ut.actime=ut.modtime=mktime(&newdate);
-  utime(filename,&ut);
-#endif
-#endif
-}
-
-
-/* mymkdir and change_file_date are not 100 % portable
-   As I don't know well Unix, I wait feedback for the unix portion */
-
-int mymkdir(dirname)
-	const char* dirname;
-{
-    int ret=0;
-#ifdef WIN32
-	ret = mkdir(dirname);
-#else
-#ifdef unix
-	ret = mkdir (dirname,0775);
-#endif
-#endif
-	return ret;
-}
-
-int makedir (newdir)
-    char *newdir;
-{
-  char *buffer ;
-  char *p;
-  int  len = strlen(newdir);  
-
-  if (len <= 0) 
-    return 0;
-
-  buffer = (char*)malloc(len+1);
-  strcpy(buffer,newdir);
-  
-  if (buffer[len-1] == '/') {
-    buffer[len-1] = '\0';
-  }
-  if (mymkdir(buffer) == 0)
-    {
-      free(buffer);
-      return 1;
-    }
-
-  p = buffer+1;
-  while (1)
-    {
-      char hold;
-
-      while(*p && *p != '\\' && *p != '/')
-        p++;
-      hold = *p;
-      *p = 0;
-      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
-        {
-          printf("couldn't create directory %s\n",buffer);
-          free(buffer);
-          return 0;
-        }
-      if (hold == 0)
-        break;
-      *p++ = hold;
-    }
-  free(buffer);
-  return 1;
-}
-
-void do_banner()
-{
-	printf("MiniUnz 0.15, demo of zLib + Unz package written by Gilles Vollant\n");
-	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
-}
-
-void do_help()
-{	
-	printf("Usage : miniunz [-exvlo] file.zip [file_to_extract]\n\n") ;
-}
-
-
-int do_list(uf)
-	unzFile uf;
-{
-	uLong i;
-	unz_global_info gi;
-	int err;
-
-	err = unzGetGlobalInfo (uf,&gi);
-	if (err!=UNZ_OK)
-		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
-    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
-    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
-	for (i=0;i<gi.number_entry;i++)
-	{
-		char filename_inzip[256];
-		unz_file_info file_info;
-		uLong ratio=0;
-		const char *string_method;
-		err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
-		if (err!=UNZ_OK)
-		{
-			printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
-			break;
-		}
-		if (file_info.uncompressed_size>0)
-			ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
-
-		if (file_info.compression_method==0)
-			string_method="Stored";
-		else
-		if (file_info.compression_method==Z_DEFLATED)
-		{
-			uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
-			if (iLevel==0)
-			  string_method="Defl:N";
-			else if (iLevel==1)
-			  string_method="Defl:X";
-			else if ((iLevel==2) || (iLevel==3))
-			  string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
-		}
-		else
-			string_method="Unkn. ";
-
-		printf("%7lu  %6s %7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
-			    file_info.uncompressed_size,string_method,file_info.compressed_size,
-				ratio,
-				(uLong)file_info.tmu_date.tm_mon + 1,
-                (uLong)file_info.tmu_date.tm_mday,
-				(uLong)file_info.tmu_date.tm_year % 100,
-				(uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
-				(uLong)file_info.crc,filename_inzip);
-		if ((i+1)<gi.number_entry)
-		{
-			err = unzGoToNextFile(uf);
-			if (err!=UNZ_OK)
-			{
-				printf("error %d with zipfile in unzGoToNextFile\n",err);
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
-
-
-int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite)
-	unzFile uf;
-	const int* popt_extract_without_path;
-    int* popt_overwrite;
-{
-	char filename_inzip[256];
-	char* filename_withoutpath;
-	char* p;
-    int err=UNZ_OK;
-    FILE *fout=NULL;
-    void* buf;
-    uInt size_buf;
-	
-	unz_file_info file_info;
-	uLong ratio=0;
-	err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
-
-	if (err!=UNZ_OK)
-	{
-		printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
-		return err;
-	}
-
-    size_buf = WRITEBUFFERSIZE;
-    buf = (void*)malloc(size_buf);
-    if (buf==NULL)
-    {
-        printf("Error allocating memory\n");
-        return UNZ_INTERNALERROR;
-    }
-
-	p = filename_withoutpath = filename_inzip;
-	while ((*p) != '\0')
-	{
-		if (((*p)=='/') || ((*p)=='\\'))
-			filename_withoutpath = p+1;
-		p++;
-	}
-
-	if ((*filename_withoutpath)=='\0')
-	{
-		if ((*popt_extract_without_path)==0)
-		{
-			printf("creating directory: %s\n",filename_inzip);
-			mymkdir(filename_inzip);
-		}
-	}
-	else
-	{
-		const char* write_filename;
-		int skip=0;
-
-		if ((*popt_extract_without_path)==0)
-			write_filename = filename_inzip;
-		else
-			write_filename = filename_withoutpath;
-
-		err = unzOpenCurrentFile(uf);
-		if (err!=UNZ_OK)
-		{
-			printf("error %d with zipfile in unzOpenCurrentFile\n",err);
-		}
-
-		if (((*popt_overwrite)==0) && (err==UNZ_OK))
-		{
-			char rep;
-			FILE* ftestexist;
-			ftestexist = fopen(write_filename,"rb");
-			if (ftestexist!=NULL)
-			{
-				fclose(ftestexist);
-				do
-				{
-					char answer[128];
-					printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
-					scanf("%1s",answer);
-					rep = answer[0] ;
-					if ((rep>='a') && (rep<='z'))
-						rep -= 0x20;
-				}
-				while ((rep!='Y') && (rep!='N') && (rep!='A'));
-			}
-
-			if (rep == 'N')
-				skip = 1;
-
-			if (rep == 'A')
-				*popt_overwrite=1;
-		}
-
-		if ((skip==0) && (err==UNZ_OK))
-		{
-			fout=fopen(write_filename,"wb");
-
-            /* some zipfile don't contain directory alone before file */
-            if ((fout==NULL) && ((*popt_extract_without_path)==0) && 
-                                (filename_withoutpath!=(char*)filename_inzip))
-            {
-                char c=*(filename_withoutpath-1);
-                *(filename_withoutpath-1)='\0';
-                makedir(write_filename);
-                *(filename_withoutpath-1)=c;
-                fout=fopen(write_filename,"wb");
-            }
-
-			if (fout==NULL)
-			{
-				printf("error opening %s\n",write_filename);
-			}
-		}
-
-		if (fout!=NULL)
-		{
-			printf(" extracting: %s\n",write_filename);
-
-			do
-			{
-				err = unzReadCurrentFile(uf,buf,size_buf);
-				if (err<0)	
-				{
-					printf("error %d with zipfile in unzReadCurrentFile\n",err);
-					break;
-				}
-				if (err>0)
-					if (fwrite(buf,err,1,fout)!=1)
-					{
-						printf("error in writing extracted file\n");
-                        err=UNZ_ERRNO;
-						break;
-					}
-			}
-			while (err>0);
-			fclose(fout);
-			if (err==0) 
-				change_file_date(write_filename,file_info.dosDate,
-					             file_info.tmu_date);
-		}
-
-        if (err==UNZ_OK)
-        {
-		    err = unzCloseCurrentFile (uf);
-		    if (err!=UNZ_OK)
-		    {
-			    printf("error %d with zipfile in unzCloseCurrentFile\n",err);
-		    }
-        }
-        else
-            unzCloseCurrentFile(uf); /* don't lose the error */       
-	}
-
-    free(buf);    
-    return err;
-}
-
-
-int do_extract(uf,opt_extract_without_path,opt_overwrite)
-	unzFile uf;
-	int opt_extract_without_path;
-    int opt_overwrite;
-{
-	uLong i;
-	unz_global_info gi;
-	int err;
-	FILE* fout=NULL;	
-
-	err = unzGetGlobalInfo (uf,&gi);
-	if (err!=UNZ_OK)
-		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
-
-	for (i=0;i<gi.number_entry;i++)
-	{
-        if (do_extract_currentfile(uf,&opt_extract_without_path,
-                                      &opt_overwrite) != UNZ_OK)
-            break;
-
-		if ((i+1)<gi.number_entry)
-		{
-			err = unzGoToNextFile(uf);
-			if (err!=UNZ_OK)
-			{
-				printf("error %d with zipfile in unzGoToNextFile\n",err);
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
-
-int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite)
-	unzFile uf;
-	const char* filename;
-	int opt_extract_without_path;
-    int opt_overwrite;
-{
-    int err = UNZ_OK;
-    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
-    {
-        printf("file %s not found in the zipfile\n",filename);
-        return 2;
-    }
-
-    if (do_extract_currentfile(uf,&opt_extract_without_path,
-                                      &opt_overwrite) == UNZ_OK)
-        return 0;
-    else
-        return 1;
-}
-
-
-int main(argc,argv)
-	int argc;
-	char *argv[];
-{
-	const char *zipfilename=NULL;
-    const char *filename_to_extract=NULL;
-	int i;
-	int opt_do_list=0;
-	int opt_do_extract=1;
-	int opt_do_extract_withoutpath=0;
-	int opt_overwrite=0;
-	char filename_try[512];
-	unzFile uf=NULL;
-
-	do_banner();
-	if (argc==1)
-	{
-		do_help();
-		exit(0);
-	}
-	else
-	{
-		for (i=1;i<argc;i++)
-		{
-			if ((*argv[i])=='-')
-			{
-				const char *p=argv[i]+1;
-				
-				while ((*p)!='\0')
-				{			
-					char c=*(p++);;
-					if ((c=='l') || (c=='L'))
-						opt_do_list = 1;
-					if ((c=='v') || (c=='V'))
-						opt_do_list = 1;
-					if ((c=='x') || (c=='X'))
-						opt_do_extract = 1;
-					if ((c=='e') || (c=='E'))
-						opt_do_extract = opt_do_extract_withoutpath = 1;
-					if ((c=='o') || (c=='O'))
-						opt_overwrite=1;
-				}
-			}
-			else
-            {
-				if (zipfilename == NULL)
-					zipfilename = argv[i];
-                else if (filename_to_extract==NULL)
-                        filename_to_extract = argv[i] ;
-            }
-		}
-	}
-
-	if (zipfilename!=NULL)
-	{
-		strcpy(filename_try,zipfilename);
-		uf = unzOpen(zipfilename);
-		if (uf==NULL)
-		{
-			strcat(filename_try,".zip");
-			uf = unzOpen(filename_try);
-		}
-	}
-
-	if (uf==NULL)
-	{
-		printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
-		exit (1);
-	}
-    printf("%s opened\n",filename_try);
-
-	if (opt_do_list==1)
-		return do_list(uf);
-	else if (opt_do_extract==1)
-    {
-        if (filename_to_extract == NULL)
-		    return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite);
-        else
-            return do_extract_onefile(uf,filename_to_extract,
-                                      opt_do_extract_withoutpath,opt_overwrite);
-    }
-	unzCloseCurrentFile(uf);
-
-	return 0;  /* to avoid warning */
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/minizip.c b/gnu/usr.bin/cvs/zlib/contrib/minizip/minizip.c
deleted file mode 100644
index 5e492d209b1..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/minizip.c
+++ /dev/null
@@ -1,302 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include <fcntl.h>
-
-#ifdef unix
-# include <unistd.h>
-# include <utime.h>
-# include <sys/types.h>
-# include <sys/stat.h>
-#else
-# include <direct.h>
-# include <io.h>
-#endif
-
-#include "zip.h"
-
-
-#define WRITEBUFFERSIZE (16384)
-#define MAXFILENAME (256)
-
-#ifdef WIN32
-uLong filetime(f, tmzip, dt)
-    char *f;                /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
-  int ret = 0;
-  {
-      FILETIME ftLocal;
-      HANDLE hFind;
-      WIN32_FIND_DATA  ff32;
-
-      hFind = FindFirstFile(f,&ff32);
-      if (hFind != INVALID_HANDLE_VALUE)
-      {
-        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
-        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
-        FindClose(hFind);
-        ret = 1;
-      }
-  }
-  return ret;
-}
-#else
-#ifdef unix
-uLong filetime(f, tmzip, dt)
-    char *f;                /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
-  int ret=0;
-  struct stat s;        /* results of stat() */
-  struct tm* filedate;
-  time_t tm_t=0;
-  
-  if (strcmp(f,"-")!=0)
-  {
-    char name[MAXFILENAME];
-    int len = strlen(f);
-    strcpy(name, f);
-    if (name[len - 1] == '/')
-      name[len - 1] = '\0';
-    /* not all systems allow stat'ing a file with / appended */
-    if (stat(name,&s)==0)
-    {
-      tm_t = s.st_mtime;
-      ret = 1;
-    }
-  }
-  filedate = localtime(&tm_t);
-
-  tmzip->tm_sec  = filedate->tm_sec;
-  tmzip->tm_min  = filedate->tm_min;
-  tmzip->tm_hour = filedate->tm_hour;
-  tmzip->tm_mday = filedate->tm_mday;
-  tmzip->tm_mon  = filedate->tm_mon ;
-  tmzip->tm_year = filedate->tm_year;
-
-  return ret;
-}
-#else
-uLong filetime(f, tmzip, dt)
-    char *f;                /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
-    uLong *dt;             /* dostime */
-{
-    return 0;
-}
-#endif
-#endif
-
-
-
-
-int check_exist_file(filename)
-    const char* filename;
-{
-	FILE* ftestexist;
-    int ret = 1;
-	ftestexist = fopen(filename,"rb");
-	if (ftestexist==NULL)
-        ret = 0;
-    else
-        fclose(ftestexist);
-    return ret;
-}
-
-void do_banner()
-{
-	printf("MiniZip 0.15, demo of zLib + Zip package written by Gilles Vollant\n");
-	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
-}
-
-void do_help()
-{	
-	printf("Usage : minizip [-o] file.zip [files_to_add]\n\n") ;
-}
-
-int main(argc,argv)
-	int argc;
-	char *argv[];
-{
-	int i;
-	int opt_overwrite=0;
-    int opt_compress_level=Z_DEFAULT_COMPRESSION;
-    int zipfilenamearg = 0;
-	char filename_try[MAXFILENAME];
-    int zipok;
-    int err=0;
-    int size_buf=0;
-    void* buf=NULL,
-
-
-	do_banner();
-	if (argc==1)
-	{
-		do_help();
-		exit(0);
-        return 0;
-	}
-	else
-	{
-		for (i=1;i<argc;i++)
-		{
-			if ((*argv[i])=='-')
-			{
-				const char *p=argv[i]+1;
-				
-				while ((*p)!='\0')
-				{			
-					char c=*(p++);;
-					if ((c=='o') || (c=='O'))
-						opt_overwrite = 1;
-                    if ((c>='0') && (c<='9'))
-                        opt_compress_level = c-'0';
-				}
-			}
-			else
-				if (zipfilenamearg == 0)
-                    zipfilenamearg = i ;
-		}
-	}
-
-    size_buf = WRITEBUFFERSIZE;
-    buf = (void*)malloc(size_buf);
-    if (buf==NULL)
-    {
-        printf("Error allocating memory\n");
-        return ZIP_INTERNALERROR;
-    }
-
-	if (zipfilenamearg==0)
-        zipok=0;
-    else
-	{
-        int i,len;
-        int dot_found=0;
-
-        zipok = 1 ;
-		strcpy(filename_try,argv[zipfilenamearg]);
-        len=strlen(filename_try);
-        for (i=0;i<len;i++)
-            if (filename_try[i]=='.')
-                dot_found=1;
-
-        if (dot_found==0)
-            strcat(filename_try,".zip");
-
-        if (opt_overwrite==0)
-            if (check_exist_file(filename_try)!=0)
-			{
-                char rep;
-				do
-				{
-					char answer[128];
-					printf("The file %s exist. Overwrite ? [y]es, [n]o : ",filename_try);
-					scanf("%1s",answer);
-					rep = answer[0] ;
-					if ((rep>='a') && (rep<='z'))
-						rep -= 0x20;
-				}
-				while ((rep!='Y') && (rep!='N'));
-                if (rep=='N')
-                    zipok = 0;
-			}
-    }
-
-    if (zipok==1)
-    {
-        zipFile zf;
-        int errclose;
-        zf = zipOpen(filename_try,0);
-        if (zf == NULL)
-        {
-            printf("error opening %s\n",filename_try);
-            err= ZIP_ERRNO;
-        }
-        else 
-            printf("creating %s\n",filename_try);
-
-        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
-        {
-            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
-            {
-                FILE * fin;
-                int size_read;
-                const char* filenameinzip = argv[i];
-                zip_fileinfo zi;
-
-                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = 
-                zi.tmz_date.tm_mday = zi.tmz_date.tm_min = zi.tmz_date.tm_year = 0;
-                zi.dosDate = 0;
-                zi.internal_fa = 0;
-                zi.external_fa = 0;
-                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
-
-
-                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
-                                 NULL,0,NULL,0,NULL /* comment*/,
-                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
-                                 opt_compress_level);
-
-                if (err != ZIP_OK)
-                    printf("error in opening %s in zipfile\n",filenameinzip);
-                else
-                {
-                    fin = fopen(filenameinzip,"rb");
-                    if (fin==NULL)
-                    {
-                        err=ZIP_ERRNO;
-                        printf("error in opening %s for reading\n",filenameinzip);
-                    }
-                }
-
-                if (err == ZIP_OK)
-                    do
-                    {
-                        err = ZIP_OK;
-                        size_read = fread(buf,1,size_buf,fin);
-                        if (size_read < size_buf)
-                            if (feof(fin)==0)
-                        {
-                            printf("error in reading %s\n",filenameinzip);
-                            err = ZIP_ERRNO;
-                        }
-
-                        if (size_read>0)
-                        {
-                            err = zipWriteInFileInZip (zf,buf,size_read);
-                            if (err<0)
-                            {
-                                printf("error in writing %s in the zipfile\n",
-                                                 filenameinzip);
-                            }
-                                
-                        }
-                    } while ((err == ZIP_OK) && (size_read>0));
-
-                fclose(fin);
-                if (err<0)
-                    err=ZIP_ERRNO;
-                else
-                {                    
-                    err = zipCloseFileInZip(zf);
-                    if (err!=ZIP_OK)
-                        printf("error in closing %s in the zipfile\n",
-                                    filenameinzip);
-                }
-            }
-        }
-        errclose = zipClose(zf,NULL);
-        if (errclose != ZIP_OK)
-            printf("error in closing %s\n",filename_try);
-   }
-
-    free(buf);
-    exit(0);
-	return 0;  /* to avoid warning */
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/readme.txt b/gnu/usr.bin/cvs/zlib/contrib/minizip/readme.txt
deleted file mode 100644
index 1fc023c720b..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-
-UnZip 0.15 additionnal library
-
-
-  This unzip package allow extract file from .ZIP file, compatible with 
-PKZip 2.04g, WinZip, InfoZip tools and compatible.
-
-  Multi volume ZipFile (span) are not supported, and old compression used by old 
-PKZip 1.x are not supported.
-
-See probdesc.zip from PKWare for specification of .ZIP format.
-
-What is Unzip
-  The Zlib library support the deflate compression and the creation of gzip (.gz) 
-file. Zlib is free and small.
-  The .Zip format, which can contain several compressed files (.gz can containt
-only one file) is a very popular format. This is why I've written a package for reading file compressed in Zipfile.
-
-Using Unzip package
-
-You need source of Zlib (get zlib111.zip and read zlib.h).
-Get unzlb015.zip and read unzip.h (whith documentation of unzip functions)
-
-The Unzip package is only two file : unzip.h and unzip.c. But it use the Zlib 
-  files.
-unztst.c is a simple sample program, which list file in a zipfile and display
-  README.TXT or FILE_ID.DIZ (if these files are found).
-miniunz.c is a mini unzip program.
-
-I'm also currenlyt writing a zipping portion (zip.h, zip.c and test with minizip.c)
-
-Please email me for feedback.
-I hope my source is compatible with Unix system, but I need your help for be sure
-
-Latest revision : Mar 04th, 1998
-
-Check http://www.winimage.com/zLibDll/unzip.html for up to date info.
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.c b/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.c
deleted file mode 100644
index 06d5e24d450..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.c
+++ /dev/null
@@ -1,1294 +0,0 @@
-/* unzip.c -- IO on .zip files using zlib 
-   Version 0.15 beta, Mar 19th, 1998,
-
-   Read unzip.h for more info
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-#include "unzip.h"
-
-#ifdef STDC
-#  include <stddef.h>
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
-    extern int errno;
-#else
-#   include <errno.h>
-#endif
-
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-
-
-#if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) && \
-                      !defined(CASESENSITIVITYDEFAULT_NO)
-#define CASESENSITIVITYDEFAULT_NO
-#endif
-
-
-#ifndef UNZ_BUFSIZE
-#define UNZ_BUFSIZE (16384)
-#endif
-
-#ifndef UNZ_MAXFILENAMEINZIP
-#define UNZ_MAXFILENAMEINZIP (256)
-#endif
-
-#ifndef ALLOC
-# define ALLOC(size) (malloc(size))
-#endif
-#ifndef TRYFREE
-# define TRYFREE(p) {if (p) free(p);}
-#endif
-
-#define SIZECENTRALDIRITEM (0x2e)
-#define SIZEZIPLOCALHEADER (0x1e)
-
-
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
-
-#ifndef SEEK_CUR
-#define SEEK_CUR    1
-#endif
-
-#ifndef SEEK_END
-#define SEEK_END    2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET    0
-#endif
-
-const char unz_copyright[] =
-   " unzip 0.15 Copyright 1998 Gilles Vollant ";
-
-/* unz_file_info_interntal contain internal info about a file in zipfile*/
-typedef struct unz_file_info_internal_s
-{
-    uLong offset_curfile;/* relative offset of local header 4 bytes */
-} unz_file_info_internal;
-
-
-/* file_in_zip_read_info_s contain internal information about a file in zipfile,
-    when reading and decompress it */
-typedef struct
-{
-	char  *read_buffer;         /* internal buffer for compressed data */
-	z_stream stream;            /* zLib stream structure for inflate */
-
-	uLong pos_in_zipfile;       /* position in byte on the zipfile, for fseek*/
-	uLong stream_initialised;   /* flag set if stream structure is initialised*/
-
-	uLong offset_local_extrafield;/* offset of the local extra field */
-	uInt  size_local_extrafield;/* size of the local extra field */
-	uLong pos_local_extrafield;   /* position in the local extra field in read*/
-
-	uLong crc32;                /* crc32 of all data uncompressed */
-	uLong crc32_wait;           /* crc32 we must obtain after decompress all */
-	uLong rest_read_compressed; /* number of byte to be decompressed */
-	uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/
-	FILE* file;                 /* io structore of the zipfile */
-	uLong compression_method;   /* compression method (0==store) */
-	uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
-} file_in_zip_read_info_s;
-
-
-/* unz_s contain internal information about the zipfile
-*/
-typedef struct
-{
-	FILE* file;                 /* io structore of the zipfile */
-	unz_global_info gi;       /* public global information */
-	uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
-	uLong num_file;             /* number of the current file in the zipfile*/
-	uLong pos_in_central_dir;   /* pos of the current file in the central dir*/
-	uLong current_file_ok;      /* flag about the usability of the current file*/
-	uLong central_pos;          /* position of the beginning of the central dir*/
-
-	uLong size_central_dir;     /* size of the central directory  */
-	uLong offset_central_dir;   /* offset of start of central directory with
-								   respect to the starting disk number */
-
-	unz_file_info cur_file_info; /* public info about the current file in zip*/
-	unz_file_info_internal cur_file_info_internal; /* private info about it*/
-    file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current
-	                                    file if we are decompressing it */
-} unz_s;
-
-
-/* ===========================================================================
-     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
-   for end of file.
-   IN assertion: the stream s has been successfully opened for reading.
-*/
-
-
-local int unzlocal_getByte(fin,pi)
-	FILE *fin;
-	int *pi;
-{
-    unsigned char c;
-	int err = fread(&c, 1, 1, fin);
-    if (err==1)
-    {
-        *pi = (int)c;
-        return UNZ_OK;
-    }
-    else
-    {
-        if (ferror(fin)) 
-            return UNZ_ERRNO;
-        else
-            return UNZ_EOF;
-    }
-}
-
-
-/* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets 
-*/
-local int unzlocal_getShort (fin,pX)
-	FILE* fin;
-    uLong *pX;
-{
-    uLong x ;
-    int i;
-    int err;
-
-    err = unzlocal_getByte(fin,&i);
-    x = (uLong)i;
-    
-    if (err==UNZ_OK)
-        err = unzlocal_getByte(fin,&i);
-    x += ((uLong)i)<<8;
-   
-    if (err==UNZ_OK)
-        *pX = x;
-    else
-        *pX = 0;
-    return err;
-}
-
-local int unzlocal_getLong (fin,pX)
-	FILE* fin;
-    uLong *pX;
-{
-    uLong x ;
-    int i;
-    int err;
-
-    err = unzlocal_getByte(fin,&i);
-    x = (uLong)i;
-    
-    if (err==UNZ_OK)
-        err = unzlocal_getByte(fin,&i);
-    x += ((uLong)i)<<8;
-
-    if (err==UNZ_OK)
-        err = unzlocal_getByte(fin,&i);
-    x += ((uLong)i)<<16;
-
-    if (err==UNZ_OK)
-        err = unzlocal_getByte(fin,&i);
-    x += ((uLong)i)<<24;
-   
-    if (err==UNZ_OK)
-        *pX = x;
-    else
-        *pX = 0;
-    return err;
-}
-
-
-/* My own strcmpi / strcasecmp */
-local int strcmpcasenosensitive_internal (fileName1,fileName2)
-	const char* fileName1;
-	const char* fileName2;
-{
-	for (;;)
-	{
-		char c1=*(fileName1++);
-		char c2=*(fileName2++);
-		if ((c1>='a') && (c1<='z'))
-			c1 -= 0x20;
-		if ((c2>='a') && (c2<='z'))
-			c2 -= 0x20;
-		if (c1=='\0')
-			return ((c2=='\0') ? 0 : -1);
-		if (c2=='\0')
-			return 1;
-		if (c1<c2)
-			return -1;
-		if (c1>c2)
-			return 1;
-	}
-}
-
-
-#ifdef  CASESENSITIVITYDEFAULT_NO
-#define CASESENSITIVITYDEFAULTVALUE 2
-#else
-#define CASESENSITIVITYDEFAULTVALUE 1
-#endif
-
-#ifndef STRCMPCASENOSENTIVEFUNCTION
-#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal
-#endif
-
-/* 
-   Compare two filename (fileName1,fileName2).
-   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
-   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
-                                                                or strcasecmp)
-   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
-        (like 1 on Unix, 2 on Windows)
-
-*/
-extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity)
-	const char* fileName1;
-	const char* fileName2;
-	int iCaseSensitivity;
-{
-	if (iCaseSensitivity==0)
-		iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE;
-
-	if (iCaseSensitivity==1)
-		return strcmp(fileName1,fileName2);
-
-	return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2);
-} 
-
-#define BUFREADCOMMENT (0x400)
-
-/*
-  Locate the Central directory of a zipfile (at the end, just before
-    the global comment)
-*/
-local uLong unzlocal_SearchCentralDir(fin)
-	FILE *fin;
-{
-	unsigned char* buf;
-	uLong uSizeFile;
-	uLong uBackRead;
-	uLong uMaxBack=0xffff; /* maximum size of global comment */
-	uLong uPosFound=0;
-	
-	if (fseek(fin,0,SEEK_END) != 0)
-		return 0;
-
-
-	uSizeFile = ftell( fin );
-	
-	if (uMaxBack>uSizeFile)
-		uMaxBack = uSizeFile;
-
-	buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
-	if (buf==NULL)
-		return 0;
-
-	uBackRead = 4;
-	while (uBackRead<uMaxBack)
-	{
-		uLong uReadSize,uReadPos ;
-		int i;
-		if (uBackRead+BUFREADCOMMENT>uMaxBack) 
-			uBackRead = uMaxBack;
-		else
-			uBackRead+=BUFREADCOMMENT;
-		uReadPos = uSizeFile-uBackRead ;
-		
-		uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? 
-                     (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
-		if (fseek(fin,uReadPos,SEEK_SET)!=0)
-			break;
-
-		if (fread(buf,(uInt)uReadSize,1,fin)!=1)
-			break;
-
-                for (i=(int)uReadSize-3; (i--)>0;)
-			if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && 
-				((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
-			{
-				uPosFound = uReadPos+i;
-				break;
-			}
-
-		if (uPosFound!=0)
-			break;
-	}
-	TRYFREE(buf);
-	return uPosFound;
-}
-
-/*
-  Open a Zip file. path contain the full pathname (by example,
-     on a Windows NT computer "c:\\test\\zlib109.zip" or on an Unix computer
-	 "zlib/zlib109.zip".
-	 If the zipfile cannot be opened (file don't exist or in not valid), the
-	   return value is NULL.
-     Else, the return value is a unzFile Handle, usable with other function
-	   of this unzip package.
-*/
-extern unzFile ZEXPORT unzOpen (path)
-	const char *path;
-{
-	unz_s us;
-	unz_s *s;
-	uLong central_pos,uL;
-	FILE * fin ;
-
-	uLong number_disk;          /* number of the current dist, used for 
-								   spaning ZIP, unsupported, always 0*/
-	uLong number_disk_with_CD;  /* number the the disk with central dir, used
-								   for spaning ZIP, unsupported, always 0*/
-	uLong number_entry_CD;      /* total number of entries in
-	                               the central dir 
-	                               (same than number_entry on nospan) */
-
-	int err=UNZ_OK;
-
-    if (unz_copyright[0]!=' ')
-        return NULL;
-
-    fin=fopen(path,"rb");
-	if (fin==NULL)
-		return NULL;
-
-	central_pos = unzlocal_SearchCentralDir(fin);
-	if (central_pos==0)
-		err=UNZ_ERRNO;
-
-	if (fseek(fin,central_pos,SEEK_SET)!=0)
-		err=UNZ_ERRNO;
-
-	/* the signature, already checked */
-	if (unzlocal_getLong(fin,&uL)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* number of this disk */
-	if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* number of the disk with the start of the central directory */
-	if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* total number of entries in the central dir on this disk */
-	if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* total number of entries in the central dir */
-	if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if ((number_entry_CD!=us.gi.number_entry) ||
-		(number_disk_with_CD!=0) ||
-		(number_disk!=0))
-		err=UNZ_BADZIPFILE;
-
-	/* size of the central directory */
-	if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* offset of start of central directory with respect to the 
-	      starting disk number */
-	if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	/* zipfile comment length */
-	if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if ((central_pos<us.offset_central_dir+us.size_central_dir) && 
-		(err==UNZ_OK))
-		err=UNZ_BADZIPFILE;
-
-	if (err!=UNZ_OK)
-	{
-		fclose(fin);
-		return NULL;
-	}
-
-	us.file=fin;
-	us.byte_before_the_zipfile = central_pos -
-		                    (us.offset_central_dir+us.size_central_dir);
-	us.central_pos = central_pos;
-    us.pfile_in_zip_read = NULL;
-	
-
-	s=(unz_s*)ALLOC(sizeof(unz_s));
-	*s=us;
-	unzGoToFirstFile((unzFile)s);	
-	return (unzFile)s;	
-}
-
-
-/*
-  Close a ZipFile opened with unzipOpen.
-  If there is files inside the .Zip opened with unzipOpenCurrentFile (see later),
-    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
-  return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzClose (file)
-	unzFile file;
-{
-	unz_s* s;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-
-    if (s->pfile_in_zip_read!=NULL)
-        unzCloseCurrentFile(file);
-
-	fclose(s->file);
-	TRYFREE(s);
-	return UNZ_OK;
-}
-
-
-/*
-  Write info about the ZipFile in the *pglobal_info structure.
-  No preparation of the structure is needed
-  return UNZ_OK if there is no problem. */
-extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info)
-	unzFile file;
-	unz_global_info *pglobal_info;
-{
-	unz_s* s;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-	*pglobal_info=s->gi;
-	return UNZ_OK;
-}
-
-
-/*
-   Translate date/time from Dos format to tm_unz (readable more easilty)
-*/
-local void unzlocal_DosDateToTmuDate (ulDosDate, ptm)
-    uLong ulDosDate;
-    tm_unz* ptm;
-{
-    uLong uDate;
-    uDate = (uLong)(ulDosDate>>16);
-    ptm->tm_mday = (uInt)(uDate&0x1f) ;
-    ptm->tm_mon =  (uInt)((((uDate)&0x1E0)/0x20)-1) ;
-    ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;
-
-    ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);
-    ptm->tm_min =  (uInt) ((ulDosDate&0x7E0)/0x20) ;
-    ptm->tm_sec =  (uInt) (2*(ulDosDate&0x1f)) ;
-}
-
-/*
-  Get Info about the current file in the zipfile, with internal only info
-*/
-local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file,
-                                                  unz_file_info *pfile_info,
-                                                  unz_file_info_internal 
-                                                  *pfile_info_internal,
-                                                  char *szFileName,
-												  uLong fileNameBufferSize,
-                                                  void *extraField,
-												  uLong extraFieldBufferSize,
-                                                  char *szComment,
-												  uLong commentBufferSize));
-
-local int unzlocal_GetCurrentFileInfoInternal (file,
-                                              pfile_info,
-                                              pfile_info_internal,
-                                              szFileName, fileNameBufferSize,
-                                              extraField, extraFieldBufferSize,
-                                              szComment,  commentBufferSize)
-	unzFile file;
-	unz_file_info *pfile_info;
-	unz_file_info_internal *pfile_info_internal;
-	char *szFileName;
-	uLong fileNameBufferSize;
-	void *extraField;
-	uLong extraFieldBufferSize;
-	char *szComment;
-	uLong commentBufferSize;
-{
-	unz_s* s;
-	unz_file_info file_info;
-	unz_file_info_internal file_info_internal;
-	int err=UNZ_OK;
-	uLong uMagic;
-	long lSeek=0;
-
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-	if (fseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0)
-		err=UNZ_ERRNO;
-
-
-	/* we check the magic */
-	if (err==UNZ_OK)
-		if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)
-			err=UNZ_ERRNO;
-		else if (uMagic!=0x02014b50)
-			err=UNZ_BADZIPFILE;
-
-	if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-    unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);
-
-	if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	lSeek+=file_info.size_filename;
-	if ((err==UNZ_OK) && (szFileName!=NULL))
-	{
-		uLong uSizeRead ;
-		if (file_info.size_filename<fileNameBufferSize)
-		{
-			*(szFileName+file_info.size_filename)='\0';
-			uSizeRead = file_info.size_filename;
-		}
-		else
-			uSizeRead = fileNameBufferSize;
-
-		if ((file_info.size_filename>0) && (fileNameBufferSize>0))
-			if (fread(szFileName,(uInt)uSizeRead,1,s->file)!=1)
-				err=UNZ_ERRNO;
-		lSeek -= uSizeRead;
-	}
-
-	
-	if ((err==UNZ_OK) && (extraField!=NULL))
-	{
-		uLong uSizeRead ;
-		if (file_info.size_file_extra<extraFieldBufferSize)
-			uSizeRead = file_info.size_file_extra;
-		else
-			uSizeRead = extraFieldBufferSize;
-
-		if (lSeek!=0)
-			if (fseek(s->file,lSeek,SEEK_CUR)==0)
-				lSeek=0;
-			else
-				err=UNZ_ERRNO;
-		if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
-			if (fread(extraField,(uInt)uSizeRead,1,s->file)!=1)
-				err=UNZ_ERRNO;
-		lSeek += file_info.size_file_extra - uSizeRead;
-	}
-	else
-		lSeek+=file_info.size_file_extra; 
-
-	
-	if ((err==UNZ_OK) && (szComment!=NULL))
-	{
-		uLong uSizeRead ;
-		if (file_info.size_file_comment<commentBufferSize)
-		{
-			*(szComment+file_info.size_file_comment)='\0';
-			uSizeRead = file_info.size_file_comment;
-		}
-		else
-			uSizeRead = commentBufferSize;
-
-		if (lSeek!=0)
-			if (fseek(s->file,lSeek,SEEK_CUR)==0)
-				lSeek=0;
-			else
-				err=UNZ_ERRNO;
-		if ((file_info.size_file_comment>0) && (commentBufferSize>0))
-			if (fread(szComment,(uInt)uSizeRead,1,s->file)!=1)
-				err=UNZ_ERRNO;
-		lSeek+=file_info.size_file_comment - uSizeRead;
-	}
-	else
-		lSeek+=file_info.size_file_comment;
-
-	if ((err==UNZ_OK) && (pfile_info!=NULL))
-		*pfile_info=file_info;
-
-	if ((err==UNZ_OK) && (pfile_info_internal!=NULL))
-		*pfile_info_internal=file_info_internal;
-
-	return err;
-}
-
-
-
-/*
-  Write info about the ZipFile in the *pglobal_info structure.
-  No preparation of the structure is needed
-  return UNZ_OK if there is no problem.
-*/
-extern int ZEXPORT unzGetCurrentFileInfo (file,
-                                                  pfile_info,
-                                                  szFileName, fileNameBufferSize,
-                                                  extraField, extraFieldBufferSize,
-                                                  szComment,  commentBufferSize)
-	unzFile file;
-	unz_file_info *pfile_info;
-	char *szFileName;
-	uLong fileNameBufferSize;
-	void *extraField;
-	uLong extraFieldBufferSize;
-	char *szComment;
-	uLong commentBufferSize;
-{
-	return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,
-												szFileName,fileNameBufferSize,
-												extraField,extraFieldBufferSize,
-												szComment,commentBufferSize);
-}
-
-/*
-  Set the current file of the zipfile to the first file.
-  return UNZ_OK if there is no problem
-*/
-extern int ZEXPORT unzGoToFirstFile (file)
-	unzFile file;
-{
-	int err=UNZ_OK;
-	unz_s* s;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-	s->pos_in_central_dir=s->offset_central_dir;
-	s->num_file=0;
-	err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
-											 &s->cur_file_info_internal,
-											 NULL,0,NULL,0,NULL,0);
-	s->current_file_ok = (err == UNZ_OK);
-	return err;
-}
-
-
-/*
-  Set the current file of the zipfile to the next file.
-  return UNZ_OK if there is no problem
-  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
-*/
-extern int ZEXPORT unzGoToNextFile (file)
-	unzFile file;
-{
-	unz_s* s;	
-	int err;
-
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-	if (!s->current_file_ok)
-		return UNZ_END_OF_LIST_OF_FILE;
-	if (s->num_file+1==s->gi.number_entry)
-		return UNZ_END_OF_LIST_OF_FILE;
-
-	s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
-			s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;
-	s->num_file++;
-	err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
-											   &s->cur_file_info_internal,
-											   NULL,0,NULL,0,NULL,0);
-	s->current_file_ok = (err == UNZ_OK);
-	return err;
-}
-
-
-/*
-  Try locate the file szFileName in the zipfile.
-  For the iCaseSensitivity signification, see unzipStringFileNameCompare
-
-  return value :
-  UNZ_OK if the file is found. It becomes the current file.
-  UNZ_END_OF_LIST_OF_FILE if the file is not found
-*/
-extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity)
-	unzFile file;
-	const char *szFileName;
-	int iCaseSensitivity;
-{
-	unz_s* s;	
-	int err;
-
-	
-	uLong num_fileSaved;
-	uLong pos_in_central_dirSaved;
-
-
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-
-    if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP)
-        return UNZ_PARAMERROR;
-
-	s=(unz_s*)file;
-	if (!s->current_file_ok)
-		return UNZ_END_OF_LIST_OF_FILE;
-
-	num_fileSaved = s->num_file;
-	pos_in_central_dirSaved = s->pos_in_central_dir;
-
-	err = unzGoToFirstFile(file);
-
-	while (err == UNZ_OK)
-	{
-		char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];
-		unzGetCurrentFileInfo(file,NULL,
-								szCurrentFileName,sizeof(szCurrentFileName)-1,
-								NULL,0,NULL,0);
-		if (unzStringFileNameCompare(szCurrentFileName,
-										szFileName,iCaseSensitivity)==0)
-			return UNZ_OK;
-		err = unzGoToNextFile(file);
-	}
-
-	s->num_file = num_fileSaved ;
-	s->pos_in_central_dir = pos_in_central_dirSaved ;
-	return err;
-}
-
-
-/*
-  Read the local header of the current zipfile
-  Check the coherency of the local header and info in the end of central
-        directory about this file
-  store in *piSizeVar the size of extra info in local header
-        (filename and size of extra field data)
-*/
-local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar,
-													poffset_local_extrafield,
-													psize_local_extrafield)
-	unz_s* s;
-	uInt* piSizeVar;
-	uLong *poffset_local_extrafield;
-	uInt  *psize_local_extrafield;
-{
-	uLong uMagic,uData,uFlags;
-	uLong size_filename;
-	uLong size_extra_field;
-	int err=UNZ_OK;
-
-	*piSizeVar = 0;
-	*poffset_local_extrafield = 0;
-	*psize_local_extrafield = 0;
-
-	if (fseek(s->file,s->cur_file_info_internal.offset_curfile +
-								s->byte_before_the_zipfile,SEEK_SET)!=0)
-		return UNZ_ERRNO;
-
-
-	if (err==UNZ_OK)
-		if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)
-			err=UNZ_ERRNO;
-		else if (uMagic!=0x04034b50)
-			err=UNZ_BADZIPFILE;
-
-	if (unzlocal_getShort(s->file,&uData) != UNZ_OK)
-		err=UNZ_ERRNO;
-/*
-	else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))
-		err=UNZ_BADZIPFILE;
-*/
-	if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK)
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getShort(s->file,&uData) != UNZ_OK)
-		err=UNZ_ERRNO;
-	else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))
-		err=UNZ_BADZIPFILE;
-
-    if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&
-                         (s->cur_file_info.compression_method!=Z_DEFLATED))
-        err=UNZ_BADZIPFILE;
-
-	if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* date/time */
-		err=UNZ_ERRNO;
-
-	if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* crc */
-		err=UNZ_ERRNO;
-	else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) &&
-		                      ((uFlags & 8)==0))
-		err=UNZ_BADZIPFILE;
-
-	if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size compr */
-		err=UNZ_ERRNO;
-	else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) &&
-							  ((uFlags & 8)==0))
-		err=UNZ_BADZIPFILE;
-
-	if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size uncompr */
-		err=UNZ_ERRNO;
-	else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && 
-							  ((uFlags & 8)==0))
-		err=UNZ_BADZIPFILE;
-
-
-	if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK)
-		err=UNZ_ERRNO;
-	else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))
-		err=UNZ_BADZIPFILE;
-
-	*piSizeVar += (uInt)size_filename;
-
-	if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK)
-		err=UNZ_ERRNO;
-	*poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +
-									SIZEZIPLOCALHEADER + size_filename;
-	*psize_local_extrafield = (uInt)size_extra_field;
-
-	*piSizeVar += (uInt)size_extra_field;
-
-	return err;
-}
-												
-/*
-  Open for reading data the current file in the zipfile.
-  If there is no error and the file is opened, the return value is UNZ_OK.
-*/
-extern int ZEXPORT unzOpenCurrentFile (file)
-	unzFile file;
-{
-	int err=UNZ_OK;
-	int Store;
-	uInt iSizeVar;
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	uLong offset_local_extrafield;  /* offset of the local extra field */
-	uInt  size_local_extrafield;    /* size of the local extra field */
-
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-	if (!s->current_file_ok)
-		return UNZ_PARAMERROR;
-
-    if (s->pfile_in_zip_read != NULL)
-        unzCloseCurrentFile(file);
-
-	if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar,
-				&offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)
-		return UNZ_BADZIPFILE;
-
-	pfile_in_zip_read_info = (file_in_zip_read_info_s*)
-									    ALLOC(sizeof(file_in_zip_read_info_s));
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_INTERNALERROR;
-
-	pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE);
-	pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;
-	pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;
-	pfile_in_zip_read_info->pos_local_extrafield=0;
-
-	if (pfile_in_zip_read_info->read_buffer==NULL)
-	{
-		TRYFREE(pfile_in_zip_read_info);
-		return UNZ_INTERNALERROR;
-	}
-
-	pfile_in_zip_read_info->stream_initialised=0;
-	
-	if ((s->cur_file_info.compression_method!=0) &&
-        (s->cur_file_info.compression_method!=Z_DEFLATED))
-		err=UNZ_BADZIPFILE;
-	Store = s->cur_file_info.compression_method==0;
-
-	pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;
-	pfile_in_zip_read_info->crc32=0;
-	pfile_in_zip_read_info->compression_method =
-            s->cur_file_info.compression_method;
-	pfile_in_zip_read_info->file=s->file;
-	pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;
-
-    pfile_in_zip_read_info->stream.total_out = 0;
-
-	if (!Store)
-	{
-	  pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
-	  pfile_in_zip_read_info->stream.zfree = (free_func)0;
-	  pfile_in_zip_read_info->stream.opaque = (voidpf)0; 
-      
-	  err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS);
-	  if (err == Z_OK)
-	    pfile_in_zip_read_info->stream_initialised=1;
-        /* windowBits is passed < 0 to tell that there is no zlib header.
-         * Note that in this case inflate *requires* an extra "dummy" byte
-         * after the compressed stream in order to complete decompression and
-         * return Z_STREAM_END. 
-         * In unzip, i don't wait absolutely Z_STREAM_END because I known the 
-         * size of both compressed and uncompressed data
-         */
-	}
-	pfile_in_zip_read_info->rest_read_compressed = 
-            s->cur_file_info.compressed_size ;
-	pfile_in_zip_read_info->rest_read_uncompressed = 
-            s->cur_file_info.uncompressed_size ;
-
-	
-	pfile_in_zip_read_info->pos_in_zipfile = 
-            s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + 
-			  iSizeVar;
-	
-	pfile_in_zip_read_info->stream.avail_in = (uInt)0;
-
-
-	s->pfile_in_zip_read = pfile_in_zip_read_info;
-    return UNZ_OK;
-}
-
-
-/*
-  Read bytes from the current file.
-  buf contain buffer where data must be copied
-  len the size of buf.
-
-  return the number of byte copied if somes bytes are copied
-  return 0 if the end of file was reached
-  return <0 with error code if there is an error
-    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
-*/
-extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
-	unzFile file;
-	voidp buf;
-	unsigned len;
-{
-	int err=UNZ_OK;
-	uInt iRead = 0;
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-    pfile_in_zip_read_info=s->pfile_in_zip_read;
-
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_PARAMERROR;
-
-
-	if ((pfile_in_zip_read_info->read_buffer == NULL))
-		return UNZ_END_OF_LIST_OF_FILE;
-	if (len==0)
-		return 0;
-
-	pfile_in_zip_read_info->stream.next_out = (Bytef*)buf;
-
-	pfile_in_zip_read_info->stream.avail_out = (uInt)len;
-	
-	if (len>pfile_in_zip_read_info->rest_read_uncompressed)
-		pfile_in_zip_read_info->stream.avail_out = 
-		  (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
-
-	while (pfile_in_zip_read_info->stream.avail_out>0)
-	{
-		if ((pfile_in_zip_read_info->stream.avail_in==0) &&
-            (pfile_in_zip_read_info->rest_read_compressed>0))
-		{
-			uInt uReadThis = UNZ_BUFSIZE;
-			if (pfile_in_zip_read_info->rest_read_compressed<uReadThis)
-				uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;
-			if (uReadThis == 0)
-				return UNZ_EOF;
-			if (fseek(pfile_in_zip_read_info->file,
-                      pfile_in_zip_read_info->pos_in_zipfile + 
-                         pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0)
-				return UNZ_ERRNO;
-			if (fread(pfile_in_zip_read_info->read_buffer,uReadThis,1,
-                         pfile_in_zip_read_info->file)!=1)
-				return UNZ_ERRNO;
-			pfile_in_zip_read_info->pos_in_zipfile += uReadThis;
-
-			pfile_in_zip_read_info->rest_read_compressed-=uReadThis;
-			
-			pfile_in_zip_read_info->stream.next_in = 
-                (Bytef*)pfile_in_zip_read_info->read_buffer;
-			pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;
-		}
-
-		if (pfile_in_zip_read_info->compression_method==0)
-		{
-			uInt uDoCopy,i ;
-			if (pfile_in_zip_read_info->stream.avail_out < 
-                            pfile_in_zip_read_info->stream.avail_in)
-				uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
-			else
-				uDoCopy = pfile_in_zip_read_info->stream.avail_in ;
-				
-			for (i=0;i<uDoCopy;i++)
-				*(pfile_in_zip_read_info->stream.next_out+i) =
-                        *(pfile_in_zip_read_info->stream.next_in+i);
-					
-			pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,
-								pfile_in_zip_read_info->stream.next_out,
-								uDoCopy);
-			pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;
-			pfile_in_zip_read_info->stream.avail_in -= uDoCopy;
-			pfile_in_zip_read_info->stream.avail_out -= uDoCopy;
-			pfile_in_zip_read_info->stream.next_out += uDoCopy;
-			pfile_in_zip_read_info->stream.next_in += uDoCopy;
-            pfile_in_zip_read_info->stream.total_out += uDoCopy;
-			iRead += uDoCopy;
-		}
-		else
-		{
-			uLong uTotalOutBefore,uTotalOutAfter;
-			const Bytef *bufBefore;
-			uLong uOutThis;
-			int flush=Z_SYNC_FLUSH;
-
-			uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;
-			bufBefore = pfile_in_zip_read_info->stream.next_out;
-
-			/*
-			if ((pfile_in_zip_read_info->rest_read_uncompressed ==
-			         pfile_in_zip_read_info->stream.avail_out) &&
-				(pfile_in_zip_read_info->rest_read_compressed == 0))
-				flush = Z_FINISH;
-			*/
-			err=inflate(&pfile_in_zip_read_info->stream,flush);
-
-			uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
-			uOutThis = uTotalOutAfter-uTotalOutBefore;
-			
-			pfile_in_zip_read_info->crc32 = 
-                crc32(pfile_in_zip_read_info->crc32,bufBefore,
-                        (uInt)(uOutThis));
-
-			pfile_in_zip_read_info->rest_read_uncompressed -=
-                uOutThis;
-
-			iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
-            
-			if (err==Z_STREAM_END)
-				return (iRead==0) ? UNZ_EOF : iRead;
-			if (err!=Z_OK) 
-				break;
-		}
-	}
-
-	if (err==Z_OK)
-		return iRead;
-	return err;
-}
-
-
-/*
-  Give the current position in uncompressed data
-*/
-extern z_off_t ZEXPORT unztell (file)
-	unzFile file;
-{
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-    pfile_in_zip_read_info=s->pfile_in_zip_read;
-
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_PARAMERROR;
-
-	return (z_off_t)pfile_in_zip_read_info->stream.total_out;
-}
-
-
-/*
-  return 1 if the end of file was reached, 0 elsewhere 
-*/
-extern int ZEXPORT unzeof (file)
-	unzFile file;
-{
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-    pfile_in_zip_read_info=s->pfile_in_zip_read;
-
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_PARAMERROR;
-	
-	if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
-		return 1;
-	else
-		return 0;
-}
-
-
-
-/*
-  Read extra field from the current file (opened by unzOpenCurrentFile)
-  This is the local-header version of the extra field (sometimes, there is
-    more info in the local-header version than in the central-header)
-
-  if buf==NULL, it return the size of the local extra field that can be read
-
-  if buf!=NULL, len is the size of the buffer, the extra header is copied in
-	buf.
-  the return value is the number of bytes copied in buf, or (if <0) 
-	the error code
-*/
-extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
-	unzFile file;
-	voidp buf;
-	unsigned len;
-{
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	uInt read_now;
-	uLong size_to_read;
-
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-    pfile_in_zip_read_info=s->pfile_in_zip_read;
-
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_PARAMERROR;
-
-	size_to_read = (pfile_in_zip_read_info->size_local_extrafield - 
-				pfile_in_zip_read_info->pos_local_extrafield);
-
-	if (buf==NULL)
-		return (int)size_to_read;
-	
-	if (len>size_to_read)
-		read_now = (uInt)size_to_read;
-	else
-		read_now = (uInt)len ;
-
-	if (read_now==0)
-		return 0;
-	
-	if (fseek(pfile_in_zip_read_info->file,
-              pfile_in_zip_read_info->offset_local_extrafield + 
-			  pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0)
-		return UNZ_ERRNO;
-
-	if (fread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1)
-		return UNZ_ERRNO;
-
-	return (int)read_now;
-}
-
-/*
-  Close the file in zip opened with unzipOpenCurrentFile
-  Return UNZ_CRCERROR if all the file was read but the CRC is not good
-*/
-extern int ZEXPORT unzCloseCurrentFile (file)
-	unzFile file;
-{
-	int err=UNZ_OK;
-
-	unz_s* s;
-	file_in_zip_read_info_s* pfile_in_zip_read_info;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-    pfile_in_zip_read_info=s->pfile_in_zip_read;
-
-	if (pfile_in_zip_read_info==NULL)
-		return UNZ_PARAMERROR;
-
-
-	if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
-	{
-		if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)
-			err=UNZ_CRCERROR;
-	}
-
-
-	TRYFREE(pfile_in_zip_read_info->read_buffer);
-	pfile_in_zip_read_info->read_buffer = NULL;
-	if (pfile_in_zip_read_info->stream_initialised)
-		inflateEnd(&pfile_in_zip_read_info->stream);
-
-	pfile_in_zip_read_info->stream_initialised = 0;
-	TRYFREE(pfile_in_zip_read_info);
-
-    s->pfile_in_zip_read=NULL;
-
-	return err;
-}
-
-
-/*
-  Get the global comment string of the ZipFile, in the szComment buffer.
-  uSizeBuf is the size of the szComment buffer.
-  return the number of byte copied or an error code <0
-*/
-extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
-	unzFile file;
-	char *szComment;
-	uLong uSizeBuf;
-{
-	int err=UNZ_OK;
-	unz_s* s;
-	uLong uReadThis ;
-	if (file==NULL)
-		return UNZ_PARAMERROR;
-	s=(unz_s*)file;
-
-	uReadThis = uSizeBuf;
-	if (uReadThis>s->gi.size_comment)
-		uReadThis = s->gi.size_comment;
-
-	if (fseek(s->file,s->central_pos+22,SEEK_SET)!=0)
-		return UNZ_ERRNO;
-
-	if (uReadThis>0)
-    {
-      *szComment='\0';
-	  if (fread(szComment,(uInt)uReadThis,1,s->file)!=1)
-		return UNZ_ERRNO;
-    }
-
-	if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment))
-		*(szComment+s->gi.size_comment)='\0';
-	return (int)uReadThis;
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.def b/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.def
deleted file mode 100644
index f6ede89bc96..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.def
+++ /dev/null
@@ -1,15 +0,0 @@
-	unzOpen                       @61
-	unzClose                      @62
-	unzGetGlobalInfo              @63
-	unzGetCurrentFileInfo         @64
-	unzGoToFirstFile              @65
-	unzGoToNextFile               @66
-	unzOpenCurrentFile            @67
-	unzReadCurrentFile            @68
-	unztell                       @70
-	unzeof                        @71
-	unzCloseCurrentFile           @72
-	unzGetGlobalComment           @73
-	unzStringFileNameCompare      @74
-	unzLocateFile                 @75
-	unzGetLocalExtrafield         @76
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.h b/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.h
deleted file mode 100644
index 76692cb703c..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/unzip.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/* unzip.h -- IO for uncompress .zip files using zlib 
-   Version 0.15 beta, Mar 19th, 1998,
-
-   Copyright (C) 1998 Gilles Vollant
-
-   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
-     WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
-
-   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
-   CAN CHANGE IN FUTURE VERSION !!
-   I WAIT FEEDBACK at mail info@winimage.com
-   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
-
-   Condition of use and distribution are the same than zlib :
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-
-*/
-/* for more info about .ZIP format, see 
-      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip */
-
-#ifndef _unz_H
-#define _unz_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
-/* like the STRICT of WIN32, we define a pointer that cannot be converted
-    from (void*) without cast */
-typedef struct TagunzFile__ { int unused; } unzFile__; 
-typedef unzFile__ *unzFile;
-#else
-typedef voidp unzFile;
-#endif
-
-
-#define UNZ_OK                                  (0)
-#define UNZ_END_OF_LIST_OF_FILE (-100)
-#define UNZ_ERRNO               (Z_ERRNO)
-#define UNZ_EOF                 (0)
-#define UNZ_PARAMERROR                  (-102)
-#define UNZ_BADZIPFILE                  (-103)
-#define UNZ_INTERNALERROR               (-104)
-#define UNZ_CRCERROR                    (-105)
-
-/* tm_unz contain date/time info */
-typedef struct tm_unz_s 
-{
-	uInt tm_sec;            /* seconds after the minute - [0,59] */
-	uInt tm_min;            /* minutes after the hour - [0,59] */
-	uInt tm_hour;           /* hours since midnight - [0,23] */
-	uInt tm_mday;           /* day of the month - [1,31] */
-	uInt tm_mon;            /* months since January - [0,11] */
-	uInt tm_year;           /* years - [1980..2044] */
-} tm_unz;
-
-/* unz_global_info structure contain global data about the ZIPfile
-   These data comes from the end of central dir */
-typedef struct unz_global_info_s
-{
-	uLong number_entry;         /* total number of entries in
-				       the central dir on this disk */
-	uLong size_comment;         /* size of the global comment of the zipfile */
-} unz_global_info;
-
-
-/* unz_file_info contain information about a file in the zipfile */
-typedef struct unz_file_info_s
-{
-    uLong version;              /* version made by                 2 bytes */
-    uLong version_needed;       /* version needed to extract       2 bytes */
-    uLong flag;                 /* general purpose bit flag        2 bytes */
-    uLong compression_method;   /* compression method              2 bytes */
-    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
-    uLong crc;                  /* crc-32                          4 bytes */
-    uLong compressed_size;      /* compressed size                 4 bytes */ 
-    uLong uncompressed_size;    /* uncompressed size               4 bytes */ 
-    uLong size_filename;        /* filename length                 2 bytes */
-    uLong size_file_extra;      /* extra field length              2 bytes */
-    uLong size_file_comment;    /* file comment length             2 bytes */
-
-    uLong disk_num_start;       /* disk number start               2 bytes */
-    uLong internal_fa;          /* internal file attributes        2 bytes */
-    uLong external_fa;          /* external file attributes        4 bytes */
-
-    tm_unz tmu_date;
-} unz_file_info;
-
-extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
-												 const char* fileName2,
-												 int iCaseSensitivity));
-/*
-   Compare two filename (fileName1,fileName2).
-   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
-   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
-								or strcasecmp)
-   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
-	(like 1 on Unix, 2 on Windows)
-*/
-
-
-extern unzFile ZEXPORT unzOpen OF((const char *path));
-/*
-  Open a Zip file. path contain the full pathname (by example,
-     on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer
-	 "zlib/zlib111.zip".
-	 If the zipfile cannot be opened (file don't exist or in not valid), the
-	   return value is NULL.
-     Else, the return value is a unzFile Handle, usable with other function
-	   of this unzip package.
-*/
-
-extern int ZEXPORT unzClose OF((unzFile file));
-/*
-  Close a ZipFile opened with unzipOpen.
-  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
-    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
-  return UNZ_OK if there is no problem. */
-
-extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
-					unz_global_info *pglobal_info));
-/*
-  Write info about the ZipFile in the *pglobal_info structure.
-  No preparation of the structure is needed
-  return UNZ_OK if there is no problem. */
-
-
-extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
-										   char *szComment,
-					   uLong uSizeBuf));
-/*
-  Get the global comment string of the ZipFile, in the szComment buffer.
-  uSizeBuf is the size of the szComment buffer.
-  return the number of byte copied or an error code <0
-*/
-
-
-/***************************************************************************/
-/* Unzip package allow you browse the directory of the zipfile */
-
-extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
-/*
-  Set the current file of the zipfile to the first file.
-  return UNZ_OK if there is no problem
-*/
-
-extern int ZEXPORT unzGoToNextFile OF((unzFile file));
-/*
-  Set the current file of the zipfile to the next file.
-  return UNZ_OK if there is no problem
-  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
-*/
-
-extern int ZEXPORT unzLocateFile OF((unzFile file, 
-				     const char *szFileName,
-				     int iCaseSensitivity));
-/*
-  Try locate the file szFileName in the zipfile.
-  For the iCaseSensitivity signification, see unzStringFileNameCompare
-
-  return value :
-  UNZ_OK if the file is found. It becomes the current file.
-  UNZ_END_OF_LIST_OF_FILE if the file is not found
-*/
-
-
-extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
-					     unz_file_info *pfile_info,
-					     char *szFileName,
-					     uLong fileNameBufferSize,
-					     void *extraField,
-					     uLong extraFieldBufferSize,
-					     char *szComment,
-					     uLong commentBufferSize));
-/*
-  Get Info about the current file
-  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
-	    the current file
-  if szFileName!=NULL, the filemane string will be copied in szFileName
-			(fileNameBufferSize is the size of the buffer)
-  if extraField!=NULL, the extra field information will be copied in extraField
-			(extraFieldBufferSize is the size of the buffer).
-			This is the Central-header version of the extra field
-  if szComment!=NULL, the comment string of the file will be copied in szComment
-			(commentBufferSize is the size of the buffer)
-*/
-
-/***************************************************************************/
-/* for reading the content of the current zipfile, you can open it, read data
-   from it, and close it (you can close it before reading all the file)
-   */
-
-extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
-/*
-  Open for reading data the current file in the zipfile.
-  If there is no error, the return value is UNZ_OK.
-*/
-
-extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
-/*
-  Close the file in zip opened with unzOpenCurrentFile
-  Return UNZ_CRCERROR if all the file was read but the CRC is not good
-*/
-
-												
-extern int ZEXPORT unzReadCurrentFile OF((unzFile file, 
-					  voidp buf,
-					  unsigned len));
-/*
-  Read bytes from the current file (opened by unzOpenCurrentFile)
-  buf contain buffer where data must be copied
-  len the size of buf.
-
-  return the number of byte copied if somes bytes are copied
-  return 0 if the end of file was reached
-  return <0 with error code if there is an error
-    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
-*/
-
-extern z_off_t ZEXPORT unztell OF((unzFile file));
-/*
-  Give the current position in uncompressed data
-*/
-
-extern int ZEXPORT unzeof OF((unzFile file));
-/*
-  return 1 if the end of file was reached, 0 elsewhere 
-*/
-
-extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
-											 voidp buf,
-											 unsigned len));
-/*
-  Read extra field from the current file (opened by unzOpenCurrentFile)
-  This is the local-header version of the extra field (sometimes, there is
-    more info in the local-header version than in the central-header)
-
-  if buf==NULL, it return the size of the local extra field
-
-  if buf!=NULL, len is the size of the buffer, the extra header is copied in
-	buf.
-  the return value is the number of bytes copied in buf, or (if <0) 
-	the error code
-*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _unz_H */
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.c b/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.c
deleted file mode 100644
index 0cae64ab7b1..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* zip.c -- IO on .zip files using zlib 
-   Version 0.15 beta, Mar 19th, 1998,
-
-   Read zip.h for more info
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-#include "zip.h"
-
-#ifdef STDC
-#  include <stddef.h>
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
-    extern int errno;
-#else
-#   include <errno.h>
-#endif
-
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#ifndef VERSIONMADEBY
-# define VERSIONMADEBY   (0x0) /* platform depedent */
-#endif
-
-#ifndef Z_BUFSIZE
-#define Z_BUFSIZE (16384)
-#endif
-
-#ifndef Z_MAXFILENAMEINZIP
-#define Z_MAXFILENAMEINZIP (256)
-#endif
-
-#ifndef ALLOC
-# define ALLOC(size) (malloc(size))
-#endif
-#ifndef TRYFREE
-# define TRYFREE(p) {if (p) free(p);}
-#endif
-
-/*
-#define SIZECENTRALDIRITEM (0x2e)
-#define SIZEZIPLOCALHEADER (0x1e)
-*/
-
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
-
-#ifndef SEEK_CUR
-#define SEEK_CUR    1
-#endif
-
-#ifndef SEEK_END
-#define SEEK_END    2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET    0
-#endif
-
-const char zip_copyright[] =
-   " zip 0.15 Copyright 1998 Gilles Vollant ";
-
-
-#define SIZEDATA_INDATABLOCK (4096-(4*4))
-
-#define LOCALHEADERMAGIC    (0x04034b50)
-#define CENTRALHEADERMAGIC  (0x02014b50)
-#define ENDHEADERMAGIC      (0x06054b50)
-
-#define FLAG_LOCALHEADER_OFFSET (0x06)
-#define CRC_LOCALHEADER_OFFSET  (0x0e)
-
-#define SIZECENTRALHEADER (0x2e) /* 46 */
-
-typedef struct linkedlist_datablock_internal_s
-{
-  struct linkedlist_datablock_internal_s* next_datablock;
-  uLong  avail_in_this_block;
-  uLong  filled_in_this_block;
-  uLong  unused; /* for future use and alignement */
-  unsigned char data[SIZEDATA_INDATABLOCK];
-} linkedlist_datablock_internal;
-
-typedef struct linkedlist_data_s
-{
-    linkedlist_datablock_internal* first_block;
-    linkedlist_datablock_internal* last_block;
-} linkedlist_data;
-
-
-typedef struct
-{
-	z_stream stream;            /* zLib stream structure for inflate */
-    int  stream_initialised;    /* 1 is stream is initialised */
-    uInt pos_in_buffered_data;  /* last written byte in buffered_data */
-
-    uLong pos_local_header;     /* offset of the local header of the file 
-                                     currenty writing */
-    char* central_header;       /* central header data for the current file */
-    uLong size_centralheader;   /* size of the central header for cur file */
-    uLong flag;                 /* flag of the file currently writing */
-
-    int  method;                /* compression method of file currenty wr.*/
-    Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
-    uLong dosDate;
-    uLong crc32;
-} curfile_info;
-
-typedef struct
-{
-    FILE * filezip;
-    linkedlist_data central_dir;/* datablock with central dir in construction*/
-    int  in_opened_file_inzip;  /* 1 if a file in the zip is currently writ.*/
-    curfile_info ci;            /* info on the file curretly writing */
-
-    uLong begin_pos;            /* position of the beginning of the zipfile */
-    uLong number_entry;
-} zip_internal;
-
-local linkedlist_datablock_internal* allocate_new_datablock()
-{
-    linkedlist_datablock_internal* ldi;
-    ldi = (linkedlist_datablock_internal*)
-                 ALLOC(sizeof(linkedlist_datablock_internal));
-    if (ldi!=NULL)
-    {
-        ldi->next_datablock = NULL ;
-        ldi->filled_in_this_block = 0 ;
-        ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
-    }
-    return ldi;
-}
-
-local void free_datablock(ldi)
-    linkedlist_datablock_internal* ldi;
-{
-    while (ldi!=NULL)
-    {
-        linkedlist_datablock_internal* ldinext = ldi->next_datablock;
-        TRYFREE(ldi);
-        ldi = ldinext;
-    }
-}
-
-local void init_linkedlist(ll)
-    linkedlist_data* ll;
-{
-    ll->first_block = ll->last_block = NULL;
-}
-
-local void free_linkedlist(ll)
-    linkedlist_data* ll;
-{
-    free_datablock(ll->first_block);
-    ll->first_block = ll->last_block = NULL;
-}
-
-
-local int add_data_in_datablock(ll,buf,len)
-    linkedlist_data* ll;    
-    const void* buf;
-    uLong len;
-{
-    linkedlist_datablock_internal* ldi;
-    const unsigned char* from_copy;
-
-    if (ll==NULL)
-        return ZIP_INTERNALERROR;
-
-    if (ll->last_block == NULL)
-    {
-        ll->first_block = ll->last_block = allocate_new_datablock();
-        if (ll->first_block == NULL)
-            return ZIP_INTERNALERROR;
-    }
-
-    ldi = ll->last_block;
-    from_copy = (unsigned char*)buf;
-
-    while (len>0)
-    {
-        uInt copy_this;
-        uInt i;
-        unsigned char* to_copy;
-
-        if (ldi->avail_in_this_block==0)
-        {
-            ldi->next_datablock = allocate_new_datablock();
-            if (ldi->next_datablock == NULL)
-                return ZIP_INTERNALERROR;
-            ldi = ldi->next_datablock ;
-            ll->last_block = ldi;
-        }
-
-        if (ldi->avail_in_this_block < len)
-            copy_this = (uInt)ldi->avail_in_this_block;
-        else
-            copy_this = (uInt)len;
-
-        to_copy = &(ldi->data[ldi->filled_in_this_block]);
-
-        for (i=0;i<copy_this;i++)
-            *(to_copy+i)=*(from_copy+i);
-
-        ldi->filled_in_this_block += copy_this;
-        ldi->avail_in_this_block -= copy_this;
-        from_copy += copy_this ;
-        len -= copy_this;
-    }
-    return ZIP_OK;
-}
-
-
-local int write_datablock(fout,ll)
-    FILE * fout;
-    linkedlist_data* ll;    
-{
-    linkedlist_datablock_internal* ldi;
-    ldi = ll->first_block;
-    while (ldi!=NULL)
-    {
-        if (ldi->filled_in_this_block > 0)
-            if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,1,fout)!=1)
-                return ZIP_ERRNO;
-        ldi = ldi->next_datablock;
-    }
-    return ZIP_OK;
-}
-
-/****************************************************************************/
-
-/* ===========================================================================
-   Outputs a long in LSB order to the given file
-   nbByte == 1, 2 or 4 (byte, short or long)
-*/
-
-local int ziplocal_putValue OF((FILE *file, uLong x, int nbByte));
-local int ziplocal_putValue (file, x, nbByte)
-    FILE *file;
-    uLong x;
-    int nbByte;
-{
-    unsigned char buf[4];
-    int n;
-    for (n = 0; n < nbByte; n++) {
-        buf[n] = (unsigned char)(x & 0xff);
-        x >>= 8;
-    }
-    if (fwrite(buf,nbByte,1,file)!=1)
-        return ZIP_ERRNO;
-    else
-        return ZIP_OK;
-}
-
-local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
-local void ziplocal_putValue_inmemory (dest, x, nbByte)
-    void* dest;
-    uLong x;
-    int nbByte;
-{
-    unsigned char* buf=(unsigned char*)dest;
-    int n;
-    for (n = 0; n < nbByte; n++) {
-        buf[n] = (unsigned char)(x & 0xff);
-        x >>= 8;
-    }
-}
-/****************************************************************************/
-
-
-local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
-    tm_zip* ptm;
-    uLong dosDate;
-{
-    uLong year = (uLong)ptm->tm_year;
-    if (year>1980)
-        year-=1980;
-    else if (year>80)
-        year-=80;
-    return
-      (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
-        ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
-}
-
-
-/****************************************************************************/
-
-extern zipFile ZEXPORT zipOpen (pathname, append)
-    const char *pathname;
-    int append;
-{
-    zip_internal ziinit;
-    zip_internal* zi;
-
-    ziinit.filezip = fopen(pathname,(append == 0) ? "wb" : "ab");
-    if (ziinit.filezip == NULL)
-        return NULL;
-    ziinit.begin_pos = ftell(ziinit.filezip);
-    ziinit.in_opened_file_inzip = 0;
-    ziinit.ci.stream_initialised = 0;
-    ziinit.number_entry = 0;
-    init_linkedlist(&(ziinit.central_dir));
-
-
-    zi = (zip_internal*)ALLOC(sizeof(zip_internal));
-    if (zi==NULL)
-    {
-        fclose(ziinit.filezip);
-        return NULL;
-    }
-
-    *zi = ziinit;
-    return (zipFile)zi;
-}
-
-extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, 
-                                        extrafield_local, size_extrafield_local,
-                                        extrafield_global, size_extrafield_global,
-                                        comment, method, level)
-    zipFile file;
-    const char* filename;
-    const zip_fileinfo* zipfi;
-    const void* extrafield_local;
-    uInt size_extrafield_local;
-    const void* extrafield_global;
-    uInt size_extrafield_global;
-    const char* comment;
-    int method;
-    int level;
-{
-    zip_internal* zi;
-    uInt size_filename;
-    uInt size_comment;
-    uInt i;
-    int err = ZIP_OK;
-
-    if (file == NULL)
-        return ZIP_PARAMERROR;
-    if ((method!=0) && (method!=Z_DEFLATED))
-        return ZIP_PARAMERROR;
-
-    zi = (zip_internal*)file;
-
-    if (zi->in_opened_file_inzip == 1)
-    {
-        err = zipCloseFileInZip (file);
-        if (err != ZIP_OK)
-            return err;
-    }
-
-
-    if (filename==NULL)
-        filename="-";
-
-    if (comment==NULL)
-        size_comment = 0;
-    else
-        size_comment = strlen(comment);
-
-    size_filename = strlen(filename);
-
-    if (zipfi == NULL)
-        zi->ci.dosDate = 0;
-    else
-    {
-        if (zipfi->dosDate != 0)
-            zi->ci.dosDate = zipfi->dosDate;
-        else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
-    }
-
-    zi->ci.flag = 0;
-    if ((level==8) || (level==9))
-      zi->ci.flag |= 2;
-    if ((level==2))
-      zi->ci.flag |= 4;
-    if ((level==1))
-      zi->ci.flag |= 6;
-
-    zi->ci.crc32 = 0;
-    zi->ci.method = method;
-    zi->ci.stream_initialised = 0;
-    zi->ci.pos_in_buffered_data = 0;
-    zi->ci.pos_local_header = ftell(zi->filezip);
-    zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + 
-                                      size_extrafield_global + size_comment;
-    zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
-
-    ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
-    /* version info */
-    ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
-    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
-    ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
-
-    if (zipfi==NULL)
-        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); 
-    else
-        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); 
-
-    if (zipfi==NULL)
-        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); 
-    else
-        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
-
-    ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header,4);
-
-    for (i=0;i<size_filename;i++)
-        *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
-
-    for (i=0;i<size_extrafield_global;i++)
-        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
-              *(((const char*)extrafield_global)+i);
-
-    for (i=0;i<size_comment;i++)
-        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
-              size_extrafield_global+i) = *(filename+i);
-    if (zi->ci.central_header == NULL)
-        return ZIP_INTERNALERROR;
-
-    /* write the local header */
-    err = ziplocal_putValue(zi->filezip,(uLong)LOCALHEADERMAGIC,4);
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)20,2);/* version needed to extract */
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.flag,2);
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.method,2);
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.dosDate,4);
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* crc 32, unknown */
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* compressed size, unknown */
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* uncompressed size, unknown */
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)size_filename,2);
-
-    if (err==ZIP_OK)
-        err = ziplocal_putValue(zi->filezip,(uLong)size_extrafield_local,2);
-
-    if ((err==ZIP_OK) && (size_filename>0))
-        if (fwrite(filename,(uInt)size_filename,1,zi->filezip)!=1)
-                err = ZIP_ERRNO;
-
-    if ((err==ZIP_OK) && (size_extrafield_local>0))
-        if (fwrite(extrafield_local,(uInt)size_extrafield_local,1,zi->filezip)
-                                                                           !=1)
-                err = ZIP_ERRNO;
-
-    zi->ci.stream.avail_in = (uInt)0;
-    zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
-    zi->ci.stream.next_out = zi->ci.buffered_data;
-    zi->ci.stream.total_in = 0;
-    zi->ci.stream.total_out = 0;
-
-    if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED))
-    {
-        zi->ci.stream.zalloc = (alloc_func)0;
-        zi->ci.stream.zfree = (free_func)0;
-        zi->ci.stream.opaque = (voidpf)0;
-
-        err = deflateInit2(&zi->ci.stream, level,
-               Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
-
-        if (err==Z_OK)
-            zi->ci.stream_initialised = 1;
-    }
-
-
-    if (err==Z_OK)
-        zi->in_opened_file_inzip = 1;
-    return err;
-}
-
-extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
-    zipFile file;
-    const voidp buf;
-    unsigned len;
-{
-    zip_internal* zi;
-    int err=ZIP_OK;
-
-    if (file == NULL)
-        return ZIP_PARAMERROR;
-    zi = (zip_internal*)file;
-
-    if (zi->in_opened_file_inzip == 0)
-        return ZIP_PARAMERROR;
-
-    zi->ci.stream.next_in = buf;
-    zi->ci.stream.avail_in = len;
-    zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
-
-    while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
-    {
-        if (zi->ci.stream.avail_out == 0)
-        {
-            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
-                                                                           !=1)
-                err = ZIP_ERRNO;
-            zi->ci.pos_in_buffered_data = 0;
-            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
-            zi->ci.stream.next_out = zi->ci.buffered_data;
-        }
-
-        if (zi->ci.method == Z_DEFLATED)
-        {
-            uLong uTotalOutBefore = zi->ci.stream.total_out;
-            err=deflate(&zi->ci.stream,  Z_NO_FLUSH);
-            zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
-
-        }
-        else
-        {
-            uInt copy_this,i;
-            if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
-                copy_this = zi->ci.stream.avail_in;
-            else
-                copy_this = zi->ci.stream.avail_out;
-            for (i=0;i<copy_this;i++)
-                *(((char*)zi->ci.stream.next_out)+i) =
-                    *(((const char*)zi->ci.stream.next_in)+i);
-            {
-                zi->ci.stream.avail_in -= copy_this;
-                zi->ci.stream.avail_out-= copy_this;
-                zi->ci.stream.next_in+= copy_this;
-                zi->ci.stream.next_out+= copy_this;
-                zi->ci.stream.total_in+= copy_this;
-                zi->ci.stream.total_out+= copy_this;
-                zi->ci.pos_in_buffered_data += copy_this;
-            }
-        }
-    }
-
-    return 0;
-}
-
-extern int ZEXPORT zipCloseFileInZip (file)
-    zipFile file;
-{
-    zip_internal* zi;
-    int err=ZIP_OK;
-
-    if (file == NULL)
-        return ZIP_PARAMERROR;
-    zi = (zip_internal*)file;
-
-    if (zi->in_opened_file_inzip == 0)    
-        return ZIP_PARAMERROR;
-    zi->ci.stream.avail_in = 0;
-    
-    if (zi->ci.method == Z_DEFLATED)
-        while (err==ZIP_OK)
-    {
-        uLong uTotalOutBefore;
-        if (zi->ci.stream.avail_out == 0)
-        {
-            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
-                                                                           !=1)
-                err = ZIP_ERRNO;
-            zi->ci.pos_in_buffered_data = 0;
-            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
-            zi->ci.stream.next_out = zi->ci.buffered_data;
-        }
-        uTotalOutBefore = zi->ci.stream.total_out;
-        err=deflate(&zi->ci.stream,  Z_FINISH);
-        zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
-    }
-
-    if (err==Z_STREAM_END)
-        err=ZIP_OK; /* this is normal */
-
-    if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
-        if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
-                                                                       !=1)
-            err = ZIP_ERRNO;
-
-    if ((zi->ci.method == Z_DEFLATED) && (err==ZIP_OK))
-    {
-        err=deflateEnd(&zi->ci.stream);
-        zi->ci.stream_initialised = 0;
-    }
-
-    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)zi->ci.crc32,4); /*crc*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+20,
-                                (uLong)zi->ci.stream.total_out,4); /*compr size*/
-    ziplocal_putValue_inmemory(zi->ci.central_header+24,
-                                (uLong)zi->ci.stream.total_in,4); /*uncompr size*/
-
-    if (err==ZIP_OK)
-        err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
-                                       (uLong)zi->ci.size_centralheader);
-    free(zi->ci.central_header);
-
-    if (err==ZIP_OK)
-    {
-        long cur_pos_inzip = ftell(zi->filezip);
-	    if (fseek(zi->filezip,
-                  zi->ci.pos_local_header + 14,SEEK_SET)!=0)
-		    err = ZIP_ERRNO;
-
-        if (err==ZIP_OK)
-            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.crc32,4); /* crc 32, unknown */
-
-        if (err==ZIP_OK) /* compressed size, unknown */
-            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_out,4); 
-
-        if (err==ZIP_OK) /* uncompressed size, unknown */
-            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_in,4);
-
-	    if (fseek(zi->filezip,
-                  cur_pos_inzip,SEEK_SET)!=0)
-		    err = ZIP_ERRNO;
-    }
-
-    zi->number_entry ++;
-    zi->in_opened_file_inzip = 0;
-
-    return err;
-}
-
-extern int ZEXPORT zipClose (file, global_comment)
-    zipFile file;
-    const char* global_comment;
-{
-    zip_internal* zi;
-    int err = 0;
-    uLong size_centraldir = 0;
-    uLong centraldir_pos_inzip ;
-    uInt size_global_comment;
-    if (file == NULL)
-        return ZIP_PARAMERROR;
-    zi = (zip_internal*)file;
-
-    if (zi->in_opened_file_inzip == 1)
-    {
-        err = zipCloseFileInZip (file);
-    }
-
-    if (global_comment==NULL)
-        size_global_comment = 0;
-    else
-        size_global_comment = strlen(global_comment);
-
-
-    centraldir_pos_inzip = ftell(zi->filezip);
-    if (err==ZIP_OK)
-    {
-        linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
-        while (ldi!=NULL)
-        {
-            if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
-                if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,
-                                        1,zi->filezip) !=1 )
-                    err = ZIP_ERRNO;
-
-            size_centraldir += ldi->filled_in_this_block;
-            ldi = ldi->next_datablock;
-        }
-    }
-    free_datablock(zi->central_dir.first_block);
-
-    if (err==ZIP_OK) /* Magic End */
-        err = ziplocal_putValue(zi->filezip,(uLong)ENDHEADERMAGIC,4);
-
-    if (err==ZIP_OK) /* number of this disk */
-        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
-
-    if (err==ZIP_OK) /* number of the disk with the start of the central directory */
-        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
-
-    if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
-        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
-
-    if (err==ZIP_OK) /* total number of entries in the central dir */
-        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
-
-    if (err==ZIP_OK) /* size of the central directory */
-        err = ziplocal_putValue(zi->filezip,(uLong)size_centraldir,4);
-
-    if (err==ZIP_OK) /* offset of start of central directory with respect to the 
-	                        starting disk number */
-        err = ziplocal_putValue(zi->filezip,(uLong)centraldir_pos_inzip ,4);
-
-    if (err==ZIP_OK) /* zipfile comment length */
-        err = ziplocal_putValue(zi->filezip,(uLong)size_global_comment,2);
-
-    if ((err==ZIP_OK) && (size_global_comment>0))
-        if (fwrite(global_comment,(uInt)size_global_comment,1,zi->filezip) !=1 )
-                err = ZIP_ERRNO;
-    fclose(zi->filezip);
-    TRYFREE(zi);
-
-    return err;
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.def b/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.def
deleted file mode 100644
index 5d5079fbcee..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.def
+++ /dev/null
@@ -1,5 +0,0 @@
-	zipOpen                       @80
-	zipOpenNewFileInZip           @81
-	zipWriteInFileInZip           @82
-	zipCloseFileInZip             @83
-	zipClose                      @84
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.h b/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.h
deleted file mode 100644
index 678260b330b..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zip.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* zip.h -- IO for compress .zip files using zlib 
-   Version 0.15 alpha, Mar 19th, 1998,
-
-   Copyright (C) 1998 Gilles Vollant
-
-   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
-     WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
-
-  For uncompress .zip file, look at unzip.h
-
-   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
-   CAN CHANGE IN FUTURE VERSION !!
-   I WAIT FEEDBACK at mail info@winimage.com
-   Visit also http://www.winimage.com/zLibDll/zip.htm for evolution
-
-   Condition of use and distribution are the same than zlib :
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-
-*/
-
-/* for more info about .ZIP format, see 
-      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _zip_H
-#define _zip_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
-/* like the STRICT of WIN32, we define a pointer that cannot be converted
-    from (void*) without cast */
-typedef struct TagzipFile__ { int unused; } zipFile__; 
-typedef zipFile__ *zipFile;
-#else
-typedef voidp zipFile;
-#endif
-
-#define ZIP_OK                                  (0)
-#define ZIP_ERRNO               (Z_ERRNO)
-#define ZIP_PARAMERROR                  (-102)
-#define ZIP_INTERNALERROR               (-104)
-
-/* tm_zip contain date/time info */
-typedef struct tm_zip_s 
-{
-	uInt tm_sec;            /* seconds after the minute - [0,59] */
-	uInt tm_min;            /* minutes after the hour - [0,59] */
-	uInt tm_hour;           /* hours since midnight - [0,23] */
-	uInt tm_mday;           /* day of the month - [1,31] */
-	uInt tm_mon;            /* months since January - [0,11] */
-	uInt tm_year;           /* years - [1980..2044] */
-} tm_zip;
-
-typedef struct
-{
-	tm_zip      tmz_date;       /* date in understandable format           */
-    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
-/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
-
-    uLong       internal_fa;    /* internal file attributes        2 bytes */
-    uLong       external_fa;    /* external file attributes        4 bytes */
-} zip_fileinfo;
-
-extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
-/*
-  Create a zipfile.
-	 pathname contain on Windows NT a filename like "c:\\zlib\\zlib111.zip" or on
-	   an Unix computer "zlib/zlib111.zip".
-	 if the file pathname exist and append=1, the zip will be created at the end
-	   of the file. (useful if the file contain a self extractor code)
-	 If the zipfile cannot be opened, the return value is NULL.
-     Else, the return value is a zipFile Handle, usable with other function
-	   of this zip package.
-
-
-*/
-
-extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
-					   const char* filename,
-					   const zip_fileinfo* zipfi,
-					   const void* extrafield_local,
-					   uInt size_extrafield_local,
-					   const void* extrafield_global,
-					   uInt size_extrafield_global,
-					   const char* comment,
-					   int method,
-					   int level));
-/*
-  Open a file in the ZIP for writing.
-  filename : the filename in zip (if NULL, '-' without quote will be used
-  *zipfi contain supplemental information
-  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
-    contains the extrafield data the the local header
-  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
-    contains the extrafield data the the local header
-  if comment != NULL, comment contain the comment string
-  method contain the compression method (0 for store, Z_DEFLATED for deflate)
-  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
-*/
-
-extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
-					   const voidp buf,
-					   unsigned len));
-/*
-  Write data in the zipfile
-*/
-
-extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
-/*
-  Close the current file in the zipfile
-*/
-
-extern int ZEXPORT zipClose OF((zipFile file,
-				const char* global_comment));
-/*
-  Close the zipfile
-*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _zip_H */
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.def b/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.def
deleted file mode 100644
index 7e9d60d55d9..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.def
+++ /dev/null
@@ -1,74 +0,0 @@
-LIBRARY		"zlib"
-
-DESCRIPTION	'"""zlib data compression library"""'
-
-
-VERSION		1.11
-
-
-HEAPSIZE	1048576,8192
-
-EXPORTS
-    adler32                        @1
-    compress                       @2
-    crc32                          @3
-    deflate                        @4
-    deflateCopy                    @5
-    deflateEnd                     @6
-    deflateInit2_                  @7
-    deflateInit_                   @8
-    deflateParams                  @9
-    deflateReset                   @10
-    deflateSetDictionary           @11
-    gzclose                        @12
-    gzdopen                        @13
-    gzerror                        @14
-    gzflush                        @15
-    gzopen                         @16
-    gzread                         @17
-    gzwrite                        @18
-    inflate                        @19
-    inflateEnd                     @20
-    inflateInit2_                  @21
-    inflateInit_                   @22
-    inflateReset                   @23
-    inflateSetDictionary           @24
-    inflateSync                    @25
-    uncompress                     @26
-    zlibVersion                    @27
-    gzprintf                       @28
-    gzputc                         @29
-    gzgetc                         @30
-    gzseek                         @31
-    gzrewind                       @32
-    gztell                         @33
-    gzeof                          @34
-    gzsetparams                    @35
-    zError                         @36
-    inflateSyncPoint               @37
-    get_crc_table                  @38
-    compress2                      @39
-    gzputs                         @40
-    gzgets                         @41
-
-	unzOpen                       @61
-	unzClose                      @62
-	unzGetGlobalInfo              @63
-	unzGetCurrentFileInfo         @64
-	unzGoToFirstFile              @65
-	unzGoToNextFile               @66
-	unzOpenCurrentFile            @67
-	unzReadCurrentFile            @68
-	unztell                       @70
-	unzeof                        @71
-	unzCloseCurrentFile           @72
-	unzGetGlobalComment           @73
-	unzStringFileNameCompare      @74
-	unzLocateFile                 @75
-	unzGetLocalExtrafield         @76
-
-	zipOpen                       @80
-	zipOpenNewFileInZip           @81
-	zipWriteInFileInZip           @82
-	zipCloseFileInZip             @83
-	zipClose                      @84
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsp b/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsp
deleted file mode 100644
index a70d4d4a6b0..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsp
+++ /dev/null
@@ -1,651 +0,0 @@
-# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
-
-CFG=zlibvc - Win32 Release
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
- "Win32 (ALPHA) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir ".\Release"
-# PROP BASE Intermediate_Dir ".\Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir ".\Release"
-# PROP Intermediate_Dir ".\Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir ".\Debug"
-# PROP BASE Intermediate_Dir ".\Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir ".\Debug"
-# PROP Intermediate_Dir ".\Debug"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "_DEBUG" /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "_DEBUG"
-# ADD RSC /l 0x40c /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc__"
-# PROP BASE Intermediate_Dir "zlibvc__"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc__"
-# PROP Intermediate_Dir "zlibvc__"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_0"
-# PROP BASE Intermediate_Dir "zlibvc_0"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_0"
-# PROP Intermediate_Dir "zlibvc_0"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_1"
-# PROP BASE Intermediate_Dir "zlibvc_1"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_1"
-# PROP Intermediate_Dir "zlibvc_1"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ENDIF 
-
-# Begin Target
-
-# Name "zlibvc - Win32 Release"
-# Name "zlibvc - Win32 Debug"
-# Name "zlibvc - Win32 ReleaseAxp"
-# Name "zlibvc - Win32 ReleaseWithoutAsm"
-# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
-# Begin Source File
-
-SOURCE=.\adler32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ADLER=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\compress.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_COMPR=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\crc32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_CRC32=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\deflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_DEFLA=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gvmat32c.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gzio.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_GZIO_=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFBL=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFCO=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFFA=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFLA=\
-	".\infblock.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFTR=\
-	".\inftrees.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFUT=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_TREES=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\uncompr.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_UNCOM=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\unzip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.rc
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlibvc.def
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ZUTIL=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
-# Begin Source File
-
-SOURCE=.\deflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
diff --git a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsw b/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsw
deleted file mode 100644
index 493cd870365..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/minizip/zlibvc.dsw
+++ /dev/null
@@ -1,41 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 5.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/untgz/Makefile b/gnu/usr.bin/cvs/zlib/contrib/untgz/Makefile
deleted file mode 100644
index 409b4bdeaae..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/untgz/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-CC=cc
-CFLAGS=-g
-
-untgz: untgz.o  ../../libz.a
-	$(CC) $(CFLAGS) -o untgz  untgz.o -L../.. -lz
-
-untgz.o: untgz.c ../../zlib.h
-	$(CC) $(CFLAGS) -c -I../.. untgz.c
-
-../../libz.a:
-	cd ../..; make
-
-clean:
-	rm -f untgz untgz.o *~
diff --git a/gnu/usr.bin/cvs/zlib/contrib/untgz/makefile.w32 b/gnu/usr.bin/cvs/zlib/contrib/untgz/makefile.w32
deleted file mode 100644
index c99dc28cf55..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/untgz/makefile.w32
+++ /dev/null
@@ -1,63 +0,0 @@
-# Makefile for zlib.  Modified for mingw32
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, 
-# 
-#   make -fmakefile.w32
-# 
-
-CC=gcc
-
-# Generate dependencies (see end of the file)
-
-CPPFLAGS=-MMD 
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is not found, replace with copy /Y .
-CP=cp -f
-
-# The default value of RM is "rm -f."  
-# If "rm.exe" is not found, uncomment:
-# RM=del
-
-LD=gcc
-LDLIBS=-L. -lz
-LDFLAGS=-s
-
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o \
-       inffast.o
-
-TEST_OBJS = minigzip.o untgz.o
-
-all: minigzip.exe untgz.exe
-
-rebuild:	clean	all
-
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $(LDFLAGS) -o $@ $< $(LDLIBS)
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d *.o *.exe libz.a foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
-
diff --git a/gnu/usr.bin/cvs/zlib/contrib/untgz/untgz.c b/gnu/usr.bin/cvs/zlib/contrib/untgz/untgz.c
deleted file mode 100644
index 4a431ff3163..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/untgz/untgz.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/*
- * untgz.c -- Display contents and/or extract file from
- * a gzip'd TAR file
- * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
- * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include <fcntl.h>
-#ifdef unix
-# include <unistd.h>
-#else
-# include <direct.h>
-# include <io.h>
-#endif
-
-#include "zlib.h"
-
-#ifdef WIN32
-#  ifndef F_OK
-#    define F_OK (0)
-#  endif
-#  ifdef _MSC_VER
-#    define mkdir(dirname,mode) _mkdir(dirname)
-#    define strdup(str)         _strdup(str)
-#    define unlink(fn)          _unlink(fn)
-#    define access(path,mode)   _access(path,mode)
-#  else
-#    define mkdir(dirname,mode) _mkdir(dirname)
-#  endif
-#else
-#  include <utime.h>
-#endif
-
-
-/* Values used in typeflag field.  */
-
-#define REGTYPE	 '0'		/* regular file */
-#define AREGTYPE '\0'		/* regular file */
-#define LNKTYPE  '1'		/* link */
-#define SYMTYPE  '2'		/* reserved */
-#define CHRTYPE  '3'		/* character special */
-#define BLKTYPE  '4'		/* block special */
-#define DIRTYPE  '5'		/* directory */
-#define FIFOTYPE '6'		/* FIFO special */
-#define CONTTYPE '7'		/* reserved */
-
-#define BLOCKSIZE 512
-
-struct tar_header
-{				/* byte offset */
-  char name[100];		/*   0 */
-  char mode[8];			/* 100 */
-  char uid[8];			/* 108 */
-  char gid[8];			/* 116 */
-  char size[12];		/* 124 */
-  char mtime[12];		/* 136 */
-  char chksum[8];		/* 148 */
-  char typeflag;		/* 156 */
-  char linkname[100];		/* 157 */
-  char magic[6];		/* 257 */
-  char version[2];		/* 263 */
-  char uname[32];		/* 265 */
-  char gname[32];		/* 297 */
-  char devmajor[8];		/* 329 */
-  char devminor[8];		/* 337 */
-  char prefix[155];		/* 345 */
-				/* 500 */
-};
-
-union tar_buffer {
-  char               buffer[BLOCKSIZE];
-  struct tar_header  header;
-};
-
-enum { TGZ_EXTRACT = 0, TGZ_LIST };
-
-static char *TGZfname	OF((const char *));
-void TGZnotfound	OF((const char *));
-
-int getoct		OF((char *, int));
-char *strtime		OF((time_t *));
-int ExprMatch		OF((char *,char *));
-
-int makedir		OF((char *));
-int matchname		OF((int,int,char **,char *));
-
-void error		OF((const char *));
-int  tar		OF((gzFile, int, int, int, char **));
-
-void help		OF((int));
-int main		OF((int, char **));
-
-char *prog;
-
-/* This will give a benign warning */
-
-static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL };
-
-/* Return the real name of the TGZ archive */
-/* or NULL if it does not exist. */
-
-static char *TGZfname OF((const char *fname))
-{
-  static char buffer[1024];
-  int origlen,i;
-  
-  strcpy(buffer,fname);
-  origlen = strlen(buffer);
-
-  for (i=0; TGZprefix[i]; i++)
-    {
-       strcpy(buffer+origlen,TGZprefix[i]);
-       if (access(buffer,F_OK) == 0)
-         return buffer;
-    }
-  return NULL;
-}
-
-/* error message for the filename */
-
-void TGZnotfound OF((const char *fname))
-{
-  int i;
-
-  fprintf(stderr,"%s : couldn't find ",prog);
-  for (i=0;TGZprefix[i];i++)
-    fprintf(stderr,(TGZprefix[i+1]) ? "%s%s, " : "or %s%s\n",
-            fname,
-            TGZprefix[i]);
-  exit(1);
-}
-
-
-/* help functions */
-
-int getoct(char *p,int width)
-{
-  int result = 0;
-  char c;
-  
-  while (width --)
-    {
-      c = *p++;
-      if (c == ' ')
-	continue;
-      if (c == 0)
-	break;
-      result = result * 8 + (c - '0');
-    }
-  return result;
-}
-
-char *strtime (time_t *t)
-{
-  struct tm   *local;
-  static char result[32];
-
-  local = localtime(t);
-  sprintf(result,"%2d/%02d/%4d %02d:%02d:%02d",
-	  local->tm_mday, local->tm_mon+1, local->tm_year+1900,
-	  local->tm_hour, local->tm_min,   local->tm_sec);
-  return result;
-}
-
-
-/* regular expression matching */
-
-#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
-
-int ExprMatch(char *string,char *expr)
-{
-  while (1)
-    {
-      if (ISSPECIAL(*expr))
-	{
-	  if (*expr == '/')
-	    {
-	      if (*string != '\\' && *string != '/')
-		return 0;
-	      string ++; expr++;
-	    }
-	  else if (*expr == '*')
-	    {
-	      if (*expr ++ == 0)
-		return 1;
-	      while (*++string != *expr)
-		if (*string == 0)
-		  return 0;
-	    }
-	}
-      else
-	{
-	  if (*string != *expr)
-	    return 0;
-	  if (*expr++ == 0)
-	    return 1;
-	  string++;
-	}
-    }
-}
-
-/* recursive make directory */
-/* abort if you get an ENOENT errno somewhere in the middle */
-/* e.g. ignore error "mkdir on existing directory" */
-/* */
-/* return 1 if OK */
-/*        0 on error */
-
-int makedir (char *newdir)
-{
-  char *buffer = strdup(newdir);
-  char *p;
-  int  len = strlen(buffer);
-  
-  if (len <= 0) {
-    free(buffer);
-    return 0;
-  }
-  if (buffer[len-1] == '/') {
-    buffer[len-1] = '\0';
-  }
-  if (mkdir(buffer, 0775) == 0)
-    {
-      free(buffer);
-      return 1;
-    }
-
-  p = buffer+1;
-  while (1)
-    {
-      char hold;
-      
-      while(*p && *p != '\\' && *p != '/')
-	p++;
-      hold = *p;
-      *p = 0;
-      if ((mkdir(buffer, 0775) == -1) && (errno == ENOENT))
-	{
-	  fprintf(stderr,"%s: couldn't create directory %s\n",prog,buffer);
-	  free(buffer);
-	  return 0;
-	}
-      if (hold == 0)
-	break;
-      *p++ = hold;
-    }
-  free(buffer);
-  return 1;
-}
-
-int matchname (int arg,int argc,char **argv,char *fname)
-{
-  if (arg == argc)		/* no arguments given (untgz tgzarchive) */
-    return 1;
-
-  while (arg < argc)
-    if (ExprMatch(fname,argv[arg++]))
-      return 1;
-
-  return 0; /* ignore this for the moment being */
-}
-
-
-/* Tar file list or extract */
-
-int tar (gzFile in,int action,int arg,int argc,char **argv)
-{
-  union  tar_buffer buffer;
-  int    len;
-  int    err;
-  int    getheader = 1;
-  int    remaining = 0;
-  FILE   *outfile = NULL;
-  char   fname[BLOCKSIZE];
-  time_t tartime;
-  
-  if (action == TGZ_LIST)
-    printf("     day      time     size                       file\n"
-	   " ---------- -------- --------- -------------------------------------\n");
-  while (1)
-    {
-      len = gzread(in, &buffer, BLOCKSIZE);
-      if (len < 0)
-	error (gzerror(in, &err));
-      /*
-       * Always expect complete blocks to process
-       * the tar information.
-       */
-      if (len != BLOCKSIZE)
-	error("gzread: incomplete block read");
-      
-      /*
-       * If we have to get a tar header
-       */
-      if (getheader == 1)
-	{
-	  /*
-	   * if we met the end of the tar
-	   * or the end-of-tar block,
-	   * we are done
-	   */
-	  if ((len == 0)  || (buffer.header.name[0]== 0)) break;
-
-	  tartime = (time_t)getoct(buffer.header.mtime,12);
-	  strcpy(fname,buffer.header.name);
-	  
-	  switch (buffer.header.typeflag)
-	    {
-	    case DIRTYPE:
-	      if (action == TGZ_LIST)
-		printf(" %s     <dir> %s\n",strtime(&tartime),fname);
-	      if (action == TGZ_EXTRACT)
-		makedir(fname);
-	      break;
-	    case REGTYPE:
-	    case AREGTYPE:
-	      remaining = getoct(buffer.header.size,12);
-	      if (action == TGZ_LIST)
-		printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
-	      if (action == TGZ_EXTRACT)
-		{
-		  if ((remaining) && (matchname(arg,argc,argv,fname)))
-		    {
-		      outfile = fopen(fname,"wb");
-		      if (outfile == NULL) {
-			/* try creating directory */
-			char *p = strrchr(fname, '/');
-			if (p != NULL) {
-			  *p = '\0';
-			  makedir(fname);
-			  *p = '/';
-			  outfile = fopen(fname,"wb");
-			}
-		      }
-		      fprintf(stderr,
-			      "%s %s\n",
-			      (outfile) ? "Extracting" : "Couldn't create",
-			      fname);
-		    }
-		  else
-		    outfile = NULL;
-		}
-	      /*
-	       * could have no contents
-	       */
-	      getheader = (remaining) ? 0 : 1;
-	      break;
-	    default:
-	      if (action == TGZ_LIST)
-		printf(" %s     <---> %s\n",strtime(&tartime),fname);
-	      break;
-	    }
-	}
-      else
-	{
-	  unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
-
-	  if ((action == TGZ_EXTRACT) && (outfile != NULL))
-	    {
-	      if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
-		{
-		  fprintf(stderr,"%s : error writing %s skipping...\n",prog,fname);
-		  fclose(outfile);
-		  unlink(fname);
-		}
-	    }
-	  remaining -= bytes;
-	  if (remaining == 0)
-	    {
-	      getheader = 1;
-	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
-		{
-#ifdef WIN32
-		  HANDLE hFile;
-		  FILETIME ftm,ftLocal;
-		  SYSTEMTIME st;
-		  struct tm localt;
- 
-		  fclose(outfile);
-
-		  localt = *localtime(&tartime);
-
-		  hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE,
-				     0, NULL, OPEN_EXISTING, 0, NULL);
-		  
-		  st.wYear = (WORD)localt.tm_year+1900;
-		  st.wMonth = (WORD)localt.tm_mon;
-		  st.wDayOfWeek = (WORD)localt.tm_wday;
-		  st.wDay = (WORD)localt.tm_mday;
-		  st.wHour = (WORD)localt.tm_hour;
-		  st.wMinute = (WORD)localt.tm_min;
-		  st.wSecond = (WORD)localt.tm_sec;
-		  st.wMilliseconds = 0;
-		  SystemTimeToFileTime(&st,&ftLocal);
-		  LocalFileTimeToFileTime(&ftLocal,&ftm);
-		  SetFileTime(hFile,&ftm,NULL,&ftm);
-		  CloseHandle(hFile);
-
-		  outfile = NULL;
-#else
-		  struct utimbuf settime;
-
-		  settime.actime = settime.modtime = tartime;
-
-		  fclose(outfile);
-		  outfile = NULL;
-		  utime(fname,&settime);
-#endif
-		}
-	    }
-	}
-    }
-  
-  if (gzclose(in) != Z_OK)
-    error("failed gzclose");
-
-  return 0;
-}
-
-
-/* =========================================================== */
-
-void help(int exitval)
-{
-  fprintf(stderr,
-	  "untgz v 0.1\n"
-	  " an sample application of zlib 1.0.4\n\n"
-          "Usage : untgz TGZfile            to extract all files\n"
-          "        untgz TGZfile fname ...  to extract selected files\n"
-          "        untgz -l TGZfile         to list archive contents\n"
-          "        untgz -h                 to display this help\n\n");
-  exit(exitval);
-}
-
-void error(const char *msg)
-{
-    fprintf(stderr, "%s: %s\n", prog, msg);
-    exit(1);
-}
-
-
-/* ====================================================================== */
-
-int _CRT_glob = 0;	/* disable globbing of the arguments */
-
-int main(int argc,char **argv)
-{
-    int 	action = TGZ_EXTRACT;
-    int 	arg = 1;
-    char	*TGZfile;
-    gzFile	*f;
-    
-
-    prog = strrchr(argv[0],'\\');
-    if (prog == NULL)
-      {
-	prog = strrchr(argv[0],'/');
-	if (prog == NULL)
-	  {
-	    prog = strrchr(argv[0],':');
-	    if (prog == NULL)
-	      prog = argv[0];
-	    else
-	      prog++;
-	  }
-	else
-	  prog++;
-      }
-    else
-      prog++;
-    
-    if (argc == 1)
-      help(0);
-
-    if (strcmp(argv[arg],"-l") == 0)
-      {
-	action = TGZ_LIST;
-	if (argc == ++arg)
-	  help(0);
-      }
-    else if (strcmp(argv[arg],"-h") == 0)
-      {
-	help(0);
-      }
-
-    if ((TGZfile = TGZfname(argv[arg])) == NULL)
-      TGZnotfound(argv[arg]);            
-
-    ++arg;
-    if ((action == TGZ_LIST) && (arg != argc))
-      help(1);
-
-/*
- *  Process the TGZ file
- */
-    switch(action)
-      {
-      case TGZ_LIST:
-      case TGZ_EXTRACT:
-	f = gzopen(TGZfile,"rb");
-	if (f == NULL)
-	  {
-	    fprintf(stderr,"%s: Couldn't gzopen %s\n",
-		    prog,
-		    TGZfile);
-	    return 1;
-	  }
-	exit(tar(f, action, arg, argc, argv));
-      break;
-	
-      default:
-	error("Unknown option!");
-	exit(1);
-      }
-
-    return 0;
-}
diff --git a/gnu/usr.bin/cvs/zlib/contrib/visual-basic.txt b/gnu/usr.bin/cvs/zlib/contrib/visual-basic.txt
deleted file mode 100644
index 10fb44bc593..00000000000
--- a/gnu/usr.bin/cvs/zlib/contrib/visual-basic.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-See below some functions declarations for Visual Basic.
-
-Frequently Asked Question:
-
-Q: Each time I use the compress function I get the -5 error (not enough
-   room in the output buffer).
-
-A: Make sure that the length of the compressed buffer is passed by
-   reference ("as any"), not by value ("as long"). Also check that
-   before the call of compress this length is equal to the total size of
-   the compressed buffer and not zero.
-
-
-From: "Jon Caruana" <jon-net@usa.net>
-Subject: Re: How to port zlib declares to vb?
-Date: Mon, 28 Oct 1996 18:33:03 -0600
-
-Got the answer! (I haven't had time to check this but it's what I got, and
-looks correct):
-
-He has the following routines working:
-        compress
-        uncompress
-        gzopen
-        gzwrite
-        gzread
-        gzclose
-
-Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
-
-#If Win16 Then   'Use Win16 calls.
-Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
-        String, comprLen As Any, ByVal buf As String, ByVal buflen
-        As Long) As Integer
-Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
-        As String, uncomprLen As Any, ByVal compr As String, ByVal
-        lcompr As Long) As Integer
-Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
-        String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
-        Long) As Integer
-#Else
-Declare Function compress Lib "ZLIB32.DLL"
-        (ByVal compr As String, comprLen As Any, ByVal buf As
-        String, ByVal buflen As Long) As Integer
-Declare Function uncompress Lib "ZLIB32.DLL"
-        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
-        String, ByVal lcompr As Long) As Long
-Declare Function gzopen Lib "ZLIB32.DLL"
-        (ByVal file As String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzwrite Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzclose Lib "ZLIB32.DLL"
-        (ByVal file As Long) As Long
-#End If
-
--Jon Caruana
-jon-net@usa.net
-Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
diff --git a/gnu/usr.bin/cvs/zlib/crc32.c b/gnu/usr.bin/cvs/zlib/crc32.c
deleted file mode 100644
index 0f02f2e864f..00000000000
--- a/gnu/usr.bin/cvs/zlib/crc32.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: crc32.c,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#include "zlib.h"
-
-#define local static
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local int crc_table_empty = 1;
-local uLongf crc_table[256];
-local void make_crc_table OF((void));
-
-/*
-  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
-  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
-  Polynomials over GF(2) are represented in binary, one bit per coefficient,
-  with the lowest powers in the most significant bit.  Then adding polynomials
-  is just exclusive-or, and multiplying a polynomial by x is a right shift by
-  one.  If we call the above polynomial p, and represent a byte as the
-  polynomial q, also with the lowest power in the most significant bit (so the
-  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
-  where a mod b means the remainder after dividing a by b.
-
-  This calculation is done using the shift-register method of multiplying and
-  taking the remainder.  The register is initialized to zero, and for each
-  incoming bit, x^32 is added mod p to the register if the bit is a one (where
-  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
-  x (which is shifting right by one and adding x^32 mod p if the bit shifted
-  out is a one).  We start with the highest power (least significant bit) of
-  q and repeat for all eight bits of q.
-
-  The table is simply the CRC of all possible eight bit values.  This is all
-  the information needed to generate CRC's on data a byte at a time for all
-  combinations of CRC register values and incoming bytes.
-*/
-local void make_crc_table()
-{
-  uLong c;
-  int n, k;
-  uLong poly;            /* polynomial exclusive-or pattern */
-  /* terms of polynomial defining this crc (except x^32): */
-  static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
-  /* make exclusive-or pattern from polynomial (0xedb88320L) */
-  poly = 0L;
-  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
-    poly |= 1L << (31 - p[n]);
- 
-  for (n = 0; n < 256; n++)
-  {
-    c = (uLong)n;
-    for (k = 0; k < 8; k++)
-      c = c & 1 ? poly ^ (c >> 1) : c >> 1;
-    crc_table[n] = c;
-  }
-  crc_table_empty = 0;
-}
-#else
-/* ========================================================================
- * Table of CRC-32's of all single-byte values (made by make_crc_table)
- */
-local uLongf crc_table[256] = {
-  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-  0x2d02ef8dL
-};
-#endif
-
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-uLongf *get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
-  if (crc_table_empty) make_crc_table();
-#endif
-  return (uLongf *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-
-/* ========================================================================= */
-uLong crc32(crc, buf, len)
-    uLong crc;
-    const Bytef *buf;
-    uInt len;
-{
-    if (buf == Z_NULL) return 0L;
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-      make_crc_table();
-#endif
-    crc = crc ^ 0xffffffffL;
-    while (len >= 8)
-    {
-      DO8(buf);
-      len -= 8;
-    }
-    if (len) do {
-      DO1(buf);
-    } while (--len);
-    return crc ^ 0xffffffffL;
-}
diff --git a/gnu/usr.bin/cvs/zlib/deflate.c b/gnu/usr.bin/cvs/zlib/deflate.c
deleted file mode 100644
index 718b2c012f0..00000000000
--- a/gnu/usr.bin/cvs/zlib/deflate.c
+++ /dev/null
@@ -1,1207 +0,0 @@
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* $Id: deflate.c,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#include "deflate.h"
-
-char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, charf *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-#endif
-
-#ifdef DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-local config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-			 Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-		  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int noheader = 0;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != sizeof(z_stream)) {
-	return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-    if (strm->zalloc == Z_NULL) {
-	strm->zalloc = zcalloc;
-	strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
-    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
-        noheader = 1;
-        windowBits = -windowBits;
-    }
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->noheader = noheader;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt length = dictLength;
-    uInt n;
-    IPos hash_head = 0;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
-        strm->state->status != INIT_STATE) return Z_STREAM_ERROR;
-
-    s = strm->state;
-    strm->adler = adler32(strm->adler, dictionary, dictLength);
-
-    if (length < MIN_MATCH) return Z_OK;
-    if (length > MAX_DIST(s)) {
-	length = MAX_DIST(s);
-	dictionary += dictLength - length;
-    }
-    zmemcpy((charf *)s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
-
-    /* Insert all strings in the hash table (except for the last two bytes).
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
-     * call of fill_window.
-     */
-    s->ins_h = s->window[0];
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
-	INSERT_STRING(s, n, hash_head);
-    }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-    
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->noheader < 0) {
-        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
-    }
-    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
-    strm->adler = 1;
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-
-    if (level == Z_DEFAULT_COMPRESSION) {
-	level = 6;
-    }
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-	return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if (func != configuration_table[level].func && strm->total_in != 0) {
-	/* Flush the last buffer: */
-	err = deflate(strm, Z_PARTIAL_FLUSH);
-    }
-    if (s->level != level) {
-	s->level = level;
-	s->max_lazy_match   = configuration_table[level].max_lazy;
-	s->good_match       = configuration_table[level].good_length;
-	s->nice_match       = configuration_table[level].nice_length;
-	s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}   
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    unsigned len = strm->state->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    zmemcpy(strm->next_out, strm->state->pending_out, len);
-    strm->next_out  += len;
-    strm->state->pending_out  += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    strm->state->pending -= len;
-    if (strm->state->pending == 0) {
-        strm->state->pending_out = strm->state->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-	flush > Z_FINISH || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = strm->state;
-
-    if (strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
-	(s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the zlib header */
-    if (s->status == INIT_STATE) {
-
-        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-        uInt level_flags = (s->level-1) >> 1;
-
-        if (level_flags > 3) level_flags = 3;
-        header |= (level_flags << 6);
-	if (s->strstart != 0) header |= PRESET_DICT;
-        header += 31 - (header % 31);
-
-        s->status = BUSY_STATE;
-        putShortMSB(s, header);
-
-	/* Save the adler32 of the preset dictionary: */
-	if (s->strstart != 0) {
-	    putShortMSB(s, (uInt)(strm->adler >> 16));
-	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-	}
-	strm->adler = 1L;
-    }
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-	    /* Since avail_out is 0, deflate will be called again with
-	     * more output space, but possibly with both pending and
-	     * avail_in equal to zero. There won't be anything to do,
-	     * but this is not an error situation so make sure we
-	     * return OK instead of BUF_ERROR at next call of deflate:
-             */
-	    s->last_flush = -1;
-	    return Z_OK;
-	}
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUFF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
-	       flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-	bstate = (*(configuration_table[s->level].func))(s, flush);
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-	    if (strm->avail_out == 0) {
-	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-	    }
-	    return Z_OK;
-	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-	     * of deflate should use the same flush parameter to make sure
-	     * that the flush is complete. So we don't have to output an
-	     * empty block here, this will be done at next call. This also
-	     * ensures that for a very small output buffer, we emit at most
-	     * one empty block.
-	     */
-	}
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-            } else { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                }
-            }
-            flush_pending(strm);
-	    if (strm->avail_out == 0) {
-	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-	      return Z_OK;
-	    }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->noheader) return Z_STREAM_END;
-
-    /* Write the zlib trailer (adler32) */
-    putShortMSB(s, (uInt)(strm->adler >> 16));
-    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    s->noheader = -1; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, strm->state->pending_buf);
-    TRY_FREE(strm, strm->state->head);
-    TRY_FREE(strm, strm->state->prev);
-    TRY_FREE(strm, strm->state->window);
-
-    status = strm->state->status;
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* ========================================================================= */
-int deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
-        return Z_STREAM_ERROR;
-    }
-    *dest = *source;
-    return Z_STREAM_ERROR; /* to be implemented */
-#if 0
-    dest->state = (struct internal_state FAR *)
-        (*dest->zalloc)(1, sizeof(deflate_state));
-    if (dest->state == Z_NULL) return Z_MEM_ERROR;
-
-    *(dest->state) = *(source->state);
-    return Z_OK;
-#endif
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    charf *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (!strm->state->noheader) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
-    }
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-		start, match, length);
-        do {
-	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-	} while (--length != 0);
-        z_error("invalid match");
-    }
-    if (verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-            more = wsize;
-
-        } else if (more == (unsigned)(-1)) {
-            /* Very unlikely, but possible on 16 bit machine if strstart == 0
-             * and lookahead == 1 (input done one byte at time)
-             */
-            more--;
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage):
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-		(ulg)((long)s->strstart - s->block_start), \
-		(eof)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
-   FLUSH_BLOCK_ONLY(s, eof); \
-   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-		   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-	Assert(s->block_start >= 0L, "block gone");
-
-	s->strstart += s->lookahead;
-	s->lookahead = 0;
-
-        /* Stored blocks are limited to 0xffff bytes: */
-        if (s->strstart == 0 || s->strstart > 0xfffe) {
-	    /* strstart == 0 is possible when wraparound on 16-bit machine */
-	    s->lookahead = s->strstart - 0xffff;
-	    s->strstart = 0xffff;
-	}
-
-	/* Emit a stored block if it is large enough: */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-	}
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL; /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            bflush = _tr_tally(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in hash table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++; 
-            } else {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
-            s->lookahead--;
-            s->strstart++; 
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL;    /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
-                 (s->match_length == MIN_MATCH &&
-                  s->strstart - s->match_start > TOO_FAR))) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
diff --git a/gnu/usr.bin/cvs/zlib/deflate.h b/gnu/usr.bin/cvs/zlib/deflate.h
deleted file mode 100644
index db29a7a8972..00000000000
--- a/gnu/usr.bin/cvs/zlib/deflate.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* $Id: deflate.h,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-#include "zutil.h"
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG
-    ulg bits_sent;      /* bit length of the compressed data */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-void _tr_init         OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-			  int eof));
-void _tr_align        OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-#endif
diff --git a/gnu/usr.bin/cvs/zlib/descrip.mms b/gnu/usr.bin/cvs/zlib/descrip.mms
deleted file mode 100644
index 9d364598a27..00000000000
--- a/gnu/usr.bin/cvs/zlib/descrip.mms
+++ /dev/null
@@ -1,48 +0,0 @@
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser <m.zinser@gsi.de>
-
-cc_defs = 
-c_deb = 
-
-.ifdef __DECC__
-pref = /prefix=all
-.endif
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
-       deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
-       inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
-
-CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
-
-all : example.exe minigzip.exe
-        @ write sys$output " Example applications available"
-libz.olb : libz.olb($(OBJS))
-	@ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
-              link example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
-              link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
-
-clean : 
-	delete *.obj;*,libz.olb;*
-
-
-# Other dependencies.
-adler32.obj : zutil.h zlib.h zconf.h
-compress.obj : zlib.h zconf.h
-crc32.obj : zutil.h zlib.h zconf.h
-deflate.obj : deflate.h zutil.h zlib.h zconf.h
-example.obj : zlib.h zconf.h
-gzio.obj : zutil.h zlib.h zconf.h
-infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.obj : zutil.h zlib.h zconf.h infblock.h
-inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
-infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.obj : zlib.h zconf.h
-trees.obj : deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : zlib.h zconf.h
-zutil.obj : zutil.h zlib.h zconf.h
diff --git a/gnu/usr.bin/cvs/zlib/example.c b/gnu/usr.bin/cvs/zlib/example.c
deleted file mode 100644
index 9365a885b14..00000000000
--- a/gnu/usr.bin/cvs/zlib/example.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: example.c,v 1.1 1996/10/18 03:35:04 tholo Exp $ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#else
-   extern void exit  OF((int));
-#endif
-
-#define CHECK_ERR(err, msg) { \
-    if (err != Z_OK) { \
-        fprintf(stderr, "%s error: %d\n", msg, err); \
-        exit(1); \
-    } \
-}
-
-const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_compress      OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-void test_gzio          OF((const char *out, const char *in, 
-		            Byte *uncompr, int uncomprLen));
-void test_deflate       OF((Byte *compr, uLong comprLen));
-void test_inflate       OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong comprLen));
-void test_sync          OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate  OF((Byte *compr, uLong comprLen));
-void test_dict_inflate  OF((Byte *compr, uLong comprLen,
-		            Byte *uncompr, uLong uncomprLen));
-int  main               OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    uLong len = strlen(hello)+1;
-
-    err = compress(compr, &comprLen, (const Bytef*)hello, len);
-    CHECK_ERR(err, "compress");
-
-    strcpy((char*)uncompr, "garbage");
-
-    err = uncompress(uncompr, &uncomprLen, compr, comprLen);
-    CHECK_ERR(err, "uncompress");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad uncompress\n");
-    } else {
-        printf("uncompress(): %s\n", uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(out, in, uncompr, uncomprLen)
-    const char *out; /* output file */
-    const char *in;  /* input file */
-    Byte *uncompr;
-    int  uncomprLen;
-{
-    int err;
-    int len = strlen(hello)+1;
-    gzFile file;
-
-    file = gzopen(out, "wb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-
-    if (gzwrite(file, (const voidp)hello, (unsigned)len) != len) {
-        fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err));
-    }
-    gzclose(file);
-
-    file = gzopen(in, "rb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-    }
-    strcpy((char*)uncompr, "garbage");
-
-    uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
-    if (uncomprLen != len) {
-        fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
-    }
-    gzclose(file);
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread\n");
-    } else {
-        printf("gzread(): %s\n", uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    int len = strlen(hello)+1;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (Bytef*)hello;
-    c_stream.next_out = compr;
-
-    while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
-        c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
-        err = deflate(&c_stream, Z_NO_FLUSH);
-        CHECK_ERR(err, "deflate");
-    }
-    /* Finish the stream, still forcing small buffers: */
-    for (;;) {
-        c_stream.avail_out = 1;
-        err = deflate(&c_stream, Z_FINISH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "deflate");
-    }
-
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_in  = compr;
-    d_stream.next_out = uncompr;
-
-    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
-        d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate\n");
-    } else {
-        printf("inflate(): %s\n", uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_SPEED);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    /* At this point, uncompr is still mostly zeroes, so it should compress
-     * very well:
-     */
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-    if (c_stream.avail_in != 0) {
-        fprintf(stderr, "deflate not greedy\n");
-    }
-
-    /* Feed in already compressed data and switch to no compression: */
-    deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
-    c_stream.next_in = compr;
-    c_stream.avail_in = (uInt)comprLen/2;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    /* Switch back to compressing mode: */
-    deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    for (;;) {
-        d_stream.next_out = uncompr;            /* discard the output */
-	d_stream.avail_out = (uInt)uncomprLen;
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "large inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
-        fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
-    } else {
-        printf("large_inflate(): OK\n");
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    int len = strlen(hello)+1;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (Bytef*)hello;
-    c_stream.next_out = compr;
-    c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)comprLen;
-    err = deflate(&c_stream, Z_FULL_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    compr[3]++; /* force an error in first compressed block */
-    c_stream.avail_in = len - 3;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        CHECK_ERR(err, "deflate");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_in  = compr;
-    d_stream.next_out = uncompr;
-    d_stream.avail_in = 2; /* just read the zlib header */
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    inflate(&d_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "inflate");
-
-    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
-    err = inflateSync(&d_stream);           /* but skip the damaged part */
-    CHECK_ERR(err, "inflateSync");
-
-    err = inflate(&d_stream, Z_FINISH);
-    if (err != Z_DATA_ERROR) {
-        fprintf(stderr, "inflate should report DATA_ERROR\n");
-        /* Because of incorrect adler32 */
-    }
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    printf("after inflateSync(): hel%s\n", uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    err = deflateSetDictionary(&c_stream,
-			       (const Bytef*)dictionary, sizeof(dictionary));
-    CHECK_ERR(err, "deflateSetDictionary");
-
-    dictId = c_stream.adler;
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    c_stream.next_in = (Bytef*)hello;
-    c_stream.avail_in = (uInt)strlen(hello)+1;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    for (;;) {
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-	if (err == Z_NEED_DICT) {
-	    if (d_stream.adler != dictId) {
-		fprintf(stderr, "unexpected dictionary");
-		exit(1);
-	    }
-	    err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-				       sizeof(dictionary));
-	}
-        CHECK_ERR(err, "inflate with dict");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate with dict\n");
-    } else {
-        printf("inflate with dictionary: %s\n", uncompr);
-    }
-}
-
-/* ===========================================================================
- * Usage:  example [output.gz  [input.gz]]
- */
-
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    Byte *compr, *uncompr;
-    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
-    uLong uncomprLen = comprLen;
-
-    if (zlibVersion()[0] != ZLIB_VERSION[0]) {
-        fprintf(stderr, "incompatible zlib version\n");
-        exit(1);
-
-    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
-        fprintf(stderr, "warning: different zlib version\n");
-    }
-
-    compr    = (Byte*)calloc((uInt)comprLen, 1);
-    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
-    /* compr and uncompr are cleared to avoid reading uninitialized
-     * data and to ensure that uncompr compresses well.
-     */
-    if (compr == Z_NULL || uncompr == Z_NULL) {
-        printf("out of memory\n");
-	exit(1);
-    }
-
-    test_compress(compr, comprLen, uncompr, uncomprLen);
-
-    test_gzio((argc > 1 ? argv[1] : "foo.gz"),
-              (argc > 2 ? argv[2] : "foo.gz"),
-	      uncompr, (int)uncomprLen);
-
-    test_deflate(compr, comprLen);
-    test_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_large_deflate(compr, comprLen, uncompr, uncomprLen);
-    test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_flush(compr, comprLen);
-    test_sync(compr, comprLen, uncompr, uncomprLen);
-
-    test_dict_deflate(compr, comprLen);
-    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    exit(0);
-    return 0; /* to avoid warning */
-}
diff --git a/gnu/usr.bin/cvs/zlib/gzio.c b/gnu/usr.bin/cvs/zlib/gzio.c
deleted file mode 100644
index df5ef003bc9..00000000000
--- a/gnu/usr.bin/cvs/zlib/gzio.c
+++ /dev/null
@@ -1,875 +0,0 @@
-/* gzio.c -- IO on .gz files
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Compile this file with -DNO_DEFLATE to avoid the compression code.
- */
-
-/* @(#) $Id: gzio.c,v 1.2 2002/12/09 00:45:34 millert Exp $ */
-
-#include <stdio.h>
-
-#include "zutil.h"
-
-struct internal_state {int dummy;}; /* for buggy compilers */
-
-#ifndef Z_BUFSIZE
-#  ifdef MAXSEG_64K
-#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
-#  else
-#    define Z_BUFSIZE 16384
-#  endif
-#endif
-#ifndef Z_PRINTF_BUFSIZE
-#  define Z_PRINTF_BUFSIZE 4096
-#endif
-
-#define ALLOC(size) malloc(size)
-#define TRYFREE(p) {if (p) free(p);}
-
-static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define RESERVED     0xE0 /* bits 5..7: reserved */
-
-typedef struct gz_stream {
-    z_stream stream;
-    int      z_err;   /* error code for last stream operation */
-    int      z_eof;   /* set if end of input file */
-    FILE     *file;   /* .gz file */
-    Byte     *inbuf;  /* input buffer */
-    Byte     *outbuf; /* output buffer */
-    uLong    crc;     /* crc32 of uncompressed data */
-    char     *msg;    /* error message */
-    char     *path;   /* path name for debugging only */
-    int      transparent; /* 1 if input file is not a .gz file */
-    char     mode;    /* 'w' or 'r' */
-    long     startpos; /* start of compressed data in file (header skipped) */
-} gz_stream;
-
-
-local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
-local int do_flush        OF((gzFile file, int flush));
-local int    get_byte     OF((gz_stream *s));
-local void   check_header OF((gz_stream *s));
-local int    destroy      OF((gz_stream *s));
-local void   putLong      OF((FILE *file, uLong x));
-local uLong  getLong      OF((gz_stream *s));
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
-   or path name (if fd == -1).
-     gz_open return NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-local gzFile gz_open (path, mode, fd)
-    const char *path;
-    const char *mode;
-    int  fd;
-{
-    int err;
-    int level = Z_DEFAULT_COMPRESSION; /* compression level */
-    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
-    char *p = (char*)mode;
-    gz_stream *s;
-    char fmode[80]; /* copy of mode, without the compression level */
-    char *m = fmode;
-
-    if (!path || !mode) return Z_NULL;
-
-    s = (gz_stream *)ALLOC(sizeof(gz_stream));
-    if (!s) return Z_NULL;
-
-    s->stream.zalloc = (alloc_func)0;
-    s->stream.zfree = (free_func)0;
-    s->stream.opaque = (voidpf)0;
-    s->stream.next_in = s->inbuf = Z_NULL;
-    s->stream.next_out = s->outbuf = Z_NULL;
-    s->stream.avail_in = s->stream.avail_out = 0;
-    s->file = NULL;
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->crc = crc32(0L, Z_NULL, 0);
-    s->msg = NULL;
-    s->transparent = 0;
-
-    s->path = (char*)ALLOC(strlen(path)+1);
-    if (s->path == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    strcpy(s->path, path); /* do this early for debugging */
-
-    s->mode = '\0';
-    do {
-        if (*p == 'r') s->mode = 'r';
-        if (*p == 'w' || *p == 'a') s->mode = 'w';
-        if (*p >= '0' && *p <= '9') {
-	    level = *p - '0';
-	} else if (*p == 'f') {
-	  strategy = Z_FILTERED;
-	} else if (*p == 'h') {
-	  strategy = Z_HUFFMAN_ONLY;
-	} else {
-	    *m++ = *p; /* copy the mode */
-	}
-    } while (*p++ && m != fmode + sizeof(fmode));
-    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
-    
-    if (s->mode == 'w') {
-#ifdef NO_DEFLATE
-        err = Z_STREAM_ERROR;
-#else
-        err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
-        /* windowBits is passed < 0 to suppress zlib header */
-
-        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-#endif
-        if (err != Z_OK || s->outbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    } else {
-        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
-        /* windowBits is passed < 0 to tell that there is no zlib header.
-         * Note that in this case inflate *requires* an extra "dummy" byte
-         * after the compressed stream in order to complete decompression and
-         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
-         * present after the compressed stream.
-         */
-        if (err != Z_OK || s->inbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    }
-    s->stream.avail_out = Z_BUFSIZE;
-
-    errno = 0;
-    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
-
-    if (s->file == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    if (s->mode == 'w') {
-        /* Write a very simple .gz header:
-         */
-        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
-             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
-	s->startpos = 10L;
-	/* We use 10L instead of ftell(s->file) to because ftell causes an
-         * fflush on some systems. This version of the library doesn't use
-         * startpos anyway in write mode, so this initialization is not
-         * necessary.
-         */
-    } else {
-	check_header(s); /* skip the .gz header */
-	s->startpos = (ftell(s->file) - s->stream.avail_in);
-    }
-    
-    return (gzFile)s;
-}
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing.
-*/
-gzFile ZEXPORT gzopen (path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open (path, mode, -1);
-}
-
-/* ===========================================================================
-     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
-   to mimic the behavio(u)r of fdopen.
-*/
-gzFile ZEXPORT gzdopen (fd, mode)
-    int fd;
-    const char *mode;
-{
-    char name[20];
-
-    if (fd < 0) return (gzFile)Z_NULL;
-    sprintf(name, "<fd:%d>", fd); /* for debugging */
-
-    return gz_open (name, mode, fd);
-}
-
-/* ===========================================================================
- * Update the compression level and strategy
- */
-int ZEXPORT gzsetparams (file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    /* Make room to allow flushing */
-    if (s->stream.avail_out == 0) {
-
-	s->stream.next_out = s->outbuf;
-	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-	    s->z_err = Z_ERRNO;
-	}
-	s->stream.avail_out = Z_BUFSIZE;
-    }
-
-    return deflateParams (&(s->stream), level, strategy);
-}
-
-/* ===========================================================================
-     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
-   for end of file.
-   IN assertion: the stream s has been successfully opened for reading.
-*/
-local int get_byte(s)
-    gz_stream *s;
-{
-    if (s->z_eof) return EOF;
-    if (s->stream.avail_in == 0) {
-	errno = 0;
-	s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-	if (s->stream.avail_in == 0) {
-	    s->z_eof = 1;
-	    if (ferror(s->file)) s->z_err = Z_ERRNO;
-	    return EOF;
-	}
-	s->stream.next_in = s->inbuf;
-    }
-    s->stream.avail_in--;
-    return *(s->stream.next_in)++;
-}
-
-/* ===========================================================================
-      Check the gzip header of a gz_stream opened for reading. Set the stream
-    mode to transparent if the gzip magic header is not present; set s->err
-    to Z_DATA_ERROR if the magic header is present but the rest of the header
-    is incorrect.
-    IN assertion: the stream s has already been created successfully;
-       s->stream.avail_in is zero for the first time, but may be non-zero
-       for concatenated .gz files.
-*/
-local void check_header(s)
-    gz_stream *s;
-{
-    int method; /* method byte */
-    int flags;  /* flags byte */
-    uInt len;
-    int c;
-
-    /* Check the gzip magic header */
-    for (len = 0; len < 2; len++) {
-	c = get_byte(s);
-	if (c != gz_magic[len]) {
-	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;
-	    if (c != EOF) {
-		s->stream.avail_in++, s->stream.next_in--;
-		s->transparent = 1;
-	    }
-	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
-	    return;
-	}
-    }
-    method = get_byte(s);
-    flags = get_byte(s);
-    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
-	s->z_err = Z_DATA_ERROR;
-	return;
-    }
-
-    /* Discard time, xflags and OS code: */
-    for (len = 0; len < 6; len++) (void)get_byte(s);
-
-    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
-	len  =  (uInt)get_byte(s);
-	len += ((uInt)get_byte(s))<<8;
-	/* len is garbage if EOF but the loop below will quit anyway */
-	while (len-- != 0 && get_byte(s) != EOF) ;
-    }
-    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
-	while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
-	while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
-	for (len = 0; len < 2; len++) (void)get_byte(s);
-    }
-    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
-}
-
- /* ===========================================================================
- * Cleanup then free the given gz_stream. Return a zlib error code.
-   Try freeing in the reverse order of allocations.
- */
-local int destroy (s)
-    gz_stream *s;
-{
-    int err = Z_OK;
-
-    if (!s) return Z_STREAM_ERROR;
-
-    TRYFREE(s->msg);
-
-    if (s->stream.state != NULL) {
-	if (s->mode == 'w') {
-#ifdef NO_DEFLATE
-	    err = Z_STREAM_ERROR;
-#else
-	    err = deflateEnd(&(s->stream));
-#endif
-	} else if (s->mode == 'r') {
-	    err = inflateEnd(&(s->stream));
-	}
-    }
-    if (s->file != NULL && fclose(s->file)) {
-#ifdef ESPIPE
-	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
-#endif
-	    err = Z_ERRNO;
-    }
-    if (s->z_err < 0) err = s->z_err;
-
-    TRYFREE(s->inbuf);
-    TRYFREE(s->outbuf);
-    TRYFREE(s->path);
-    TRYFREE(s);
-    return err;
-}
-
-/* ===========================================================================
-     Reads the given number of uncompressed bytes from the compressed file.
-   gzread returns the number of bytes actually read (0 for end of file).
-*/
-int ZEXPORT gzread (file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
-    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
-
-    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
-
-    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
-    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
-
-    next_out = (Byte*)buf;
-    s->stream.next_out = (Bytef*)buf;
-    s->stream.avail_out = len;
-
-    while (s->stream.avail_out != 0) {
-
-	if (s->transparent) {
-	    /* Copy first the lookahead bytes: */
-	    uInt n = s->stream.avail_in;
-	    if (n > s->stream.avail_out) n = s->stream.avail_out;
-	    if (n > 0) {
-		zmemcpy(s->stream.next_out, s->stream.next_in, n);
-		next_out += n;
-		s->stream.next_out = next_out;
-		s->stream.next_in   += n;
-		s->stream.avail_out -= n;
-		s->stream.avail_in  -= n;
-	    }
-	    if (s->stream.avail_out > 0) {
-		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
-					     s->file);
-	    }
-	    len -= s->stream.avail_out;
-	    s->stream.total_in  += (uLong)len;
-	    s->stream.total_out += (uLong)len;
-            if (len == 0) s->z_eof = 1;
-	    return (int)len;
-	}
-        if (s->stream.avail_in == 0 && !s->z_eof) {
-
-            errno = 0;
-            s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-            if (s->stream.avail_in == 0) {
-                s->z_eof = 1;
-		if (ferror(s->file)) {
-		    s->z_err = Z_ERRNO;
-		    break;
-		}
-            }
-            s->stream.next_in = s->inbuf;
-        }
-        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
-
-	if (s->z_err == Z_STREAM_END) {
-	    /* Check CRC and original size */
-	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-	    start = s->stream.next_out;
-
-	    if (getLong(s) != s->crc) {
-		s->z_err = Z_DATA_ERROR;
-	    } else {
-	        (void)getLong(s);
-                /* The uncompressed length returned by above getlong() may
-                 * be different from s->stream.total_out) in case of
-		 * concatenated .gz files. Check for such files:
-		 */
-		check_header(s);
-		if (s->z_err == Z_OK) {
-		    uLong total_in = s->stream.total_in;
-		    uLong total_out = s->stream.total_out;
-
-		    inflateReset(&(s->stream));
-		    s->stream.total_in = total_in;
-		    s->stream.total_out = total_out;
-		    s->crc = crc32(0L, Z_NULL, 0);
-		}
-	    }
-	}
-	if (s->z_err != Z_OK || s->z_eof) break;
-    }
-    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-
-    return (int)(len - s->stream.avail_out);
-}
-
-
-/* ===========================================================================
-      Reads one byte from the compressed file. gzgetc returns this byte
-   or -1 in case of end of file or error.
-*/
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    unsigned char c;
-
-    return gzread(file, &c, 1) == 1 ? c : -1;
-}
-
-
-/* ===========================================================================
-      Reads bytes from the compressed file until len-1 characters are
-   read, or a newline character is read and transferred to buf, or an
-   end-of-file condition is encountered.  The string is then terminated
-   with a null character.
-      gzgets returns buf, or Z_NULL in case of error.
-
-      The current implementation is not optimized at all.
-*/
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    char *b = buf;
-    if (buf == Z_NULL || len <= 0) return Z_NULL;
-
-    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
-    *buf = '\0';
-    return b == buf && len > 0 ? Z_NULL : b;
-}
-
-
-#ifndef NO_DEFLATE
-/* ===========================================================================
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of bytes actually written (0 in case of error).
-*/
-int ZEXPORT gzwrite (file, buf, len)
-    gzFile file;
-    const voidp buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.next_in = (Bytef*)buf;
-    s->stream.avail_in = len;
-
-    while (s->stream.avail_in != 0) {
-
-        if (s->stream.avail_out == 0) {
-
-            s->stream.next_out = s->outbuf;
-            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-                s->z_err = Z_ERRNO;
-                break;
-            }
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
-        if (s->z_err != Z_OK) break;
-    }
-    s->crc = crc32(s->crc, (const Bytef *)buf, len);
-
-    return (int)(len - s->stream.avail_in);
-}
-
-/* ===========================================================================
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).
-*/
-#ifdef STDC
-#include <stdarg.h>
-
-int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    va_list va;
-    int len;
-
-    va_start(va, format);
-#ifdef HAS_vsnprintf
-    (void)vsnprintf(buf, sizeof(buf), format, va);
-#else
-    (void)vsprintf(buf, format, va);
-#endif
-    va_end(va);
-    len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
-    if (len <= 0) return 0;
-
-    return gzwrite(file, buf, (unsigned)len);
-}
-#else /* not ANSI C */
-
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-	               a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    int len;
-
-#ifdef HAS_snprintf
-    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
-	     a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#else
-    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
-	    a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#endif
-    len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
-    if (len <= 0) return 0;
-
-    return gzwrite(file, buf, len);
-}
-#endif
-
-/* ===========================================================================
-      Writes c, converted to an unsigned char, into the compressed file.
-   gzputc returns the value that was written, or -1 in case of error.
-*/
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned char cc = (unsigned char) c; /* required for big endian systems */
-
-    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
-}
-
-
-/* ===========================================================================
-      Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-      gzputs returns the number of characters written, or -1 in case of error.
-*/
-int ZEXPORT gzputs(file, s)
-    gzFile file;
-    const char *s;
-{
-    return gzwrite(file, (char*)s, (unsigned)strlen(s));
-}
-
-
-/* ===========================================================================
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function.
-*/
-local int do_flush (file, flush)
-    gzFile file;
-    int flush;
-{
-    uInt len;
-    int done = 0;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.avail_in = 0; /* should be zero already anyway */
-
-    for (;;) {
-        len = Z_BUFSIZE - s->stream.avail_out;
-
-        if (len != 0) {
-            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
-                s->z_err = Z_ERRNO;
-                return Z_ERRNO;
-            }
-            s->stream.next_out = s->outbuf;
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        if (done) break;
-        s->z_err = deflate(&(s->stream), flush);
-
-	/* Ignore the second of two consecutive flushes: */
-	if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
-
-        /* deflate has finished flushing only when it hasn't used up
-         * all the available space in the output buffer: 
-         */
-        done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
- 
-        if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
-    }
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-
-int ZEXPORT gzflush (file, flush)
-     gzFile file;
-     int flush;
-{
-    gz_stream *s = (gz_stream*)file;
-    int err = do_flush (file, flush);
-
-    if (err) return err;
-    fflush(s->file);
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-#endif /* NO_DEFLATE */
-
-/* ===========================================================================
-      Sets the starting position for the next gzread or gzwrite on the given
-   compressed file. The offset represents a number of bytes in the
-      gzseek returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error.
-      SEEK_END is not implemented, returns error.
-      In this version of the library, gzseek can be extremely slow.
-*/
-z_off_t ZEXPORT gzseek (file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || whence == SEEK_END ||
-	s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
-	return -1L;
-    }
-    
-    if (s->mode == 'w') {
-#ifdef NO_DEFLATE
-	return -1L;
-#else
-	if (whence == SEEK_SET) {
-	    offset -= s->stream.total_in;
-	}
-	if (offset < 0) return -1L;
-
-	/* At this point, offset is the number of zero bytes to write. */
-	if (s->inbuf == Z_NULL) {
-	    s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
-	    zmemzero(s->inbuf, Z_BUFSIZE);
-	}
-	while (offset > 0)  {
-	    uInt size = Z_BUFSIZE;
-	    if (offset < Z_BUFSIZE) size = (uInt)offset;
-
-	    size = gzwrite(file, s->inbuf, size);
-	    if (size == 0) return -1L;
-
-	    offset -= size;
-	}
-	return (z_off_t)s->stream.total_in;
-#endif
-    }
-    /* Rest of function is for reading only */
-
-    /* compute absolute position */
-    if (whence == SEEK_CUR) {
-	offset += s->stream.total_out;
-    }
-    if (offset < 0) return -1L;
-
-    if (s->transparent) {
-	/* map to fseek */
-	s->stream.avail_in = 0;
-	s->stream.next_in = s->inbuf;
-        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
-
-	s->stream.total_in = s->stream.total_out = (uLong)offset;
-	return offset;
-    }
-
-    /* For a negative seek, rewind and use positive seek */
-    if ((uLong)offset >= s->stream.total_out) {
-	offset -= s->stream.total_out;
-    } else if (gzrewind(file) < 0) {
-	return -1L;
-    }
-    /* offset is now the number of bytes to skip. */
-
-    if (offset != 0 && s->outbuf == Z_NULL) {
-	s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-    }
-    while (offset > 0)  {
-	int size = Z_BUFSIZE;
-	if (offset < Z_BUFSIZE) size = (int)offset;
-
-	size = gzread(file, s->outbuf, (uInt)size);
-	if (size <= 0) return -1L;
-	offset -= size;
-    }
-    return (z_off_t)s->stream.total_out;
-}
-
-/* ===========================================================================
-     Rewinds input file. 
-*/
-int ZEXPORT gzrewind (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-    
-    if (s == NULL || s->mode != 'r') return -1;
-
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->stream.avail_in = 0;
-    s->stream.next_in = s->inbuf;
-    s->crc = crc32(0L, Z_NULL, 0);
-	
-    if (s->startpos == 0) { /* not a compressed file */
-	rewind(s->file);
-	return 0;
-    }
-
-    (void) inflateReset(&s->stream);
-    return fseek(s->file, s->startpos, SEEK_SET);
-}
-
-/* ===========================================================================
-     Returns the starting position for the next gzread or gzwrite on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
-*/
-z_off_t ZEXPORT gztell (file)
-    gzFile file;
-{
-    return gzseek(file, 0L, SEEK_CUR);
-}
-
-/* ===========================================================================
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
-*/
-int ZEXPORT gzeof (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-    
-    return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
-}
-
-/* ===========================================================================
-   Outputs a long in LSB order to the given file
-*/
-local void putLong (file, x)
-    FILE *file;
-    uLong x;
-{
-    int n;
-    for (n = 0; n < 4; n++) {
-        fputc((int)(x & 0xff), file);
-        x >>= 8;
-    }
-}
-
-/* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets z_err in case
-   of error.
-*/
-local uLong getLong (s)
-    gz_stream *s;
-{
-    uLong x = (uLong)get_byte(s);
-    int c;
-
-    x += ((uLong)get_byte(s))<<8;
-    x += ((uLong)get_byte(s))<<16;
-    c = get_byte(s);
-    if (c == EOF) s->z_err = Z_DATA_ERROR;
-    x += ((uLong)c)<<24;
-    return x;
-}
-
-/* ===========================================================================
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state.
-*/
-int ZEXPORT gzclose (file)
-    gzFile file;
-{
-    int err;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) return Z_STREAM_ERROR;
-
-    if (s->mode == 'w') {
-#ifdef NO_DEFLATE
-	return Z_STREAM_ERROR;
-#else
-        err = do_flush (file, Z_FINISH);
-        if (err != Z_OK) return destroy((gz_stream*)file);
-
-        putLong (s->file, s->crc);
-        putLong (s->file, s->stream.total_in);
-#endif
-    }
-    return destroy((gz_stream*)file);
-}
-
-/* ===========================================================================
-     Returns the error message for the last error which occured on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occured in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-const char*  ZEXPORT gzerror (file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    char *m;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) {
-        *errnum = Z_STREAM_ERROR;
-        return (const char*)ERR_MSG(Z_STREAM_ERROR);
-    }
-    *errnum = s->z_err;
-    if (*errnum == Z_OK) return (const char*)"";
-
-    m =  (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
-
-    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
-
-    TRYFREE(s->msg);
-    s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
-    strcpy(s->msg, s->path);
-    strcat(s->msg, ": ");
-    strcat(s->msg, m);
-    return (const char*)s->msg;
-}
diff --git a/gnu/usr.bin/cvs/zlib/infblock.c b/gnu/usr.bin/cvs/zlib/infblock.c
deleted file mode 100644
index cc2e6745a78..00000000000
--- a/gnu/usr.bin/cvs/zlib/infblock.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-#ifdef DEBUG
-  extern uInt inflate_hufts;
-#endif
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BAD;
-          z->msg = (char*)"invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
-      {
-        s->mode = BAD;
-        z->msg = (char*)"invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BAD;
-        z->msg = (char*)"too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BAD;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            s->mode = BAD;
-            z->msg = (char*)"invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-#ifdef DEBUG
-      inflate_hufts = 0;
-#endif
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BAD;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok, %d * %d bytes used\n",
-              inflate_hufts, sizeof(inflate_huft)));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        ZFREE(z, s->sub.trees.blens);
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONE;
-    case DONE:
-      r = Z_STREAM_END;
-      LEAVE
-    case BAD:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window);
-  ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt  n;
-{
-  zmemcpy((charf *)s->window, d, n);
-  s->read = s->write = s->window + n;
-}
diff --git a/gnu/usr.bin/cvs/zlib/infblock.h b/gnu/usr.bin/cvs/zlib/infblock.h
deleted file mode 100644
index 3ecd50cd3a6..00000000000
--- a/gnu/usr.bin/cvs/zlib/infblock.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_streamp z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-extern int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));                      /* initial return code */
-
-extern void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern void inflate_set_dictionary OF((
-    inflate_blocks_statef *s,
-    const Bytef *d,  /* dictionary */
-    uInt  n));       /* dictionary length */
diff --git a/gnu/usr.bin/cvs/zlib/infcodes.c b/gnu/usr.bin/cvs/zlib/infcodes.c
deleted file mode 100644
index 3ae3818a194..00000000000
--- a/gnu/usr.bin/cvs/zlib/infcodes.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
-  ZFREE(z, c);
-  Tracev((stderr, "inflate:       codes free\n"));
-}
diff --git a/gnu/usr.bin/cvs/zlib/infcodes.h b/gnu/usr.bin/cvs/zlib/infcodes.h
deleted file mode 100644
index c2c38df2c06..00000000000
--- a/gnu/usr.bin/cvs/zlib/infcodes.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_streamp ));
-
-extern int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-extern void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_streamp ));
-
diff --git a/gnu/usr.bin/cvs/zlib/inffast.c b/gnu/usr.bin/cvs/zlib/inffast.c
deleted file mode 100644
index 86eee4a2992..00000000000
--- a/gnu/usr.bin/cvs/zlib/inffast.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (uInt)(q - s->window); /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = (char*)"invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = (char*)"invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
diff --git a/gnu/usr.bin/cvs/zlib/inffast.h b/gnu/usr.bin/cvs/zlib/inffast.h
deleted file mode 100644
index 8cc644efb1f..00000000000
--- a/gnu/usr.bin/cvs/zlib/inffast.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_streamp ));
diff --git a/gnu/usr.bin/cvs/zlib/inffixed.h b/gnu/usr.bin/cvs/zlib/inffixed.h
deleted file mode 100644
index 77f7e763145..00000000000
--- a/gnu/usr.bin/cvs/zlib/inffixed.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* inffixed.h -- table for decoding fixed codes
- * Generated automatically by the maketree.c program
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-local uInt fixed_bl = 9;
-local uInt fixed_bd = 5;
-local inflate_huft fixed_tl[] = {
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
-  };
-local inflate_huft fixed_td[] = {
-    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
-    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
-    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
-    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
-    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
-    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
-    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
-    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
-  };
diff --git a/gnu/usr.bin/cvs/zlib/inflate.c b/gnu/usr.bin/cvs/zlib/inflate.c
deleted file mode 100644
index 74cc69c8684..00000000000
--- a/gnu/usr.bin/cvs/zlib/inflate.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "infblock.h"
-
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      DICT4,    /* four dictionary check bytes to go */
-      DICT3,    /* three dictionary check bytes to go */
-      DICT2,    /* two dictionary check bytes to go */
-      DICT1,    /* one dictionary check byte to go */
-      DICT0,    /* waiting for inflateSetDictionary */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state);
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
-  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-      stream_size != sizeof(z_stream))
-      return Z_VERSION_ERROR;
-
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->msg = Z_NULL;
-  if (z->zalloc == Z_NULL)
-  {
-    z->zalloc = zcalloc;
-    z->opaque = (voidpf)0;
-  }
-  if (z->zfree == Z_NULL) z->zfree = zcfree;
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
-  return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_streamp z;
-int f;
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      b = NEXTBYTE;
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      if (!(b & PRESET_DICT))
-      {
-        z->state->mode = BLOCKS;
-	break;
-      }
-      z->state->mode = DICT4;
-    case DICT4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = DICT3;
-    case DICT3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = DICT2;
-    case DICT2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = DICT1;
-    case DICT1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-      z->adler = z->state->sub.check.need;
-      z->state->mode = DICT0;
-      return Z_NEED_DICT;
-    case DICT0:
-      z->state->mode = BAD;
-      z->msg = (char*)"need dictionary";
-      z->state->sub.marker = 0;       /* can try inflateSync */
-      return Z_STREAM_ERROR;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-}
-
-
-int inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt  dictLength;
-{
-  uInt length = dictLength;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
-    return Z_STREAM_ERROR;
-
-  if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
-  z->adler = 1L;
-
-  if (length >= ((uInt)1<<z->state->wbits))
-  {
-    length = (1<<z->state->wbits)-1;
-    dictionary += dictLength - length;
-  }
-  inflate_set_dictionary(z->state->blocks, dictionary, length);
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-
-int inflateSync(z)
-z_streamp z;
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
diff --git a/gnu/usr.bin/cvs/zlib/inftrees.c b/gnu/usr.bin/cvs/zlib/inftrees.c
deleted file mode 100644
index 90205bd1e57..00000000000
--- a/gnu/usr.bin/cvs/zlib/inftrees.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-
-char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-struct internal_state  {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_streamp ));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local uInt cpdext[30] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-uIntf *d;               /* list of base values for non-simple codes */
-uIntf *e;               /* list of extra bits for non-simple codes */  
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-z_streamp zs;           /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = g - w;
-        z = z > (uInt)l ? l : z;        /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-#ifdef DEBUG
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n+s-s; /* s-s to avoid warning */
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-{
-  /* build fixed tables if not already (multiple overlapped executions ok) */
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = Z_NULL;
-    z.opaque = (voidpf)&f;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    Assert(f == 0, "invalid build of fixed tables");
-    fixed_built = 1;
-  }
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_streamp z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}
diff --git a/gnu/usr.bin/cvs/zlib/inftrees.h b/gnu/usr.bin/cvs/zlib/inftrees.h
deleted file mode 100644
index b06613ddd3f..00000000000
--- a/gnu/usr.bin/cvs/zlib/inftrees.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG
-  extern uInt inflate_hufts;
-#endif
-
-extern int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_streamp ));               /* for zfree function */
-
diff --git a/gnu/usr.bin/cvs/zlib/infutil.c b/gnu/usr.bin/cvs/zlib/infutil.c
deleted file mode 100644
index eb21199c350..00000000000
--- a/gnu/usr.bin/cvs/zlib/infutil.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt n;
-  Bytef *p;
-  Bytef *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  zmemcpy(p, q, n);
-  p += n;
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    zmemcpy(p, q, n);
-    p += n;
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
diff --git a/gnu/usr.bin/cvs/zlib/infutil.h b/gnu/usr.bin/cvs/zlib/infutil.h
deleted file mode 100644
index 702cd290c37..00000000000
--- a/gnu/usr.bin/cvs/zlib/infutil.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONE,     /* finished last block, done */
-      BAD}      /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  inflate_block_mode  mode;     /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl;
-      inflate_huft *td;         /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-struct internal_state      {int dummy;}; /* for buggy compilers */
-
-#endif
diff --git a/gnu/usr.bin/cvs/zlib/maketree.c b/gnu/usr.bin/cvs/zlib/maketree.c
deleted file mode 100644
index 949d7864185..00000000000
--- a/gnu/usr.bin/cvs/zlib/maketree.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* maketree.c -- make inffixed.h table for decoding fixed codes
- * Copyright (C) 1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* This program is included in the distribution for completeness.
-   You do not need to compile or run this program since inffixed.h
-   is already included in the distribution.  To use this program
-   you need to compile zlib with BUILDFIXED defined and then compile
-   and link this program with the zlib library.  Then the output of
-   this program can be piped to inffixed.h. */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "zutil.h"
-#include "inftrees.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* generate initialization table for an inflate_huft structure array */
-void maketree(uInt b, inflate_huft *t)
-{
-  int i, e;
-
-  i = 0;
-  while (1)
-  {
-    e = t[i].exop;
-    if (e && (e & (16+64)) == 0)        /* table pointer */
-    {
-      fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
-      exit(1);
-    }
-    if (i % 4 == 0)
-      printf("\n   ");
-    printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
-    if (++i == (1<<b))
-      break;
-    putchar(',');
-  }
-  puts("");
-}
-
-/* create the fixed tables in C initialization syntax */
-void main(void)
-{
-  int r;
-  uInt bl, bd;
-  inflate_huft *tl, *td;
-  z_stream z;
-
-  z.zalloc = zcalloc;
-  z.opaque = (voidpf)0;
-  z.zfree = zcfree;
-  r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
-  if (r)
-  {
-    fprintf(stderr, "inflate_trees_fixed error %d\n", r);
-    return;
-  }
-  puts("/* inffixed.h -- table for decoding fixed codes");
-  puts(" * Generated automatically by the maketree.c program");
-  puts(" */");
-  puts("");
-  puts("/* WARNING: this file should *not* be used by applications. It is");
-  puts("   part of the implementation of the compression library and is");
-  puts("   subject to change. Applications should only use zlib.h.");
-  puts(" */");
-  puts("");
-  printf("local uInt fixed_bl = %d;\n", bl);
-  printf("local uInt fixed_bd = %d;\n", bd);
-  printf("local inflate_huft fixed_tl[] = {");
-  maketree(bl, tl);
-  puts("  };");
-  printf("local inflate_huft fixed_td[] = {");
-  maketree(bd, td);
-  puts("  };");
-}
diff --git a/gnu/usr.bin/cvs/zlib/minigzip.c b/gnu/usr.bin/cvs/zlib/minigzip.c
deleted file mode 100644
index 476ee1ed686..00000000000
--- a/gnu/usr.bin/cvs/zlib/minigzip.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- * minigzip is a minimal implementation of the gzip utility. This is
- * only an example of using zlib and isn't meant to replace the
- * full-featured gzip. No attempt is made to deal with file systems
- * limiting names to 14 or 8+3 characters, etc... Error checking is
- * very limited. So use minigzip only for testing; use gzip for the
- * real thing. On MSDOS, use only on file names without extension
- * or in pipe mode.
- */
-
-/* $Id: minigzip.c,v 1.1 1996/10/18 03:35:05 tholo Exp $ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#else
-   extern void exit  OF((int));
-#endif
-
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32)
-#  include <fcntl.h>
-#  include <io.h>
-#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#  define SET_BINARY_MODE(file)
-#endif
-
-#ifdef VMS
-#  define unlink delete
-#  define GZ_SUFFIX "-gz"
-#endif
-#ifdef RISCOS
-#  define unlink remove
-#  define GZ_SUFFIX "-gz"
-#  define fileno(file) file->__file
-#endif
-
-#ifndef GZ_SUFFIX
-#  define GZ_SUFFIX ".gz"
-#endif
-#define SUFFIX_LEN sizeof(GZ_SUFFIX)
-
-extern int unlink OF((const char *));
-
-#define BUFLEN 4096
-#define MAX_NAME_LEN 1024
-
-#define local static
-/* For MSDOS and other systems with limitation on stack size. For Unix,
-    #define local
-   works also.
- */
-
-char *prog;
-
-void error           OF((const char *msg));
-void gz_compress     OF((FILE   *in, gzFile out));
-void gz_uncompress   OF((gzFile in, FILE   *out));
-void file_compress   OF((char  *file));
-void file_uncompress OF((char  *file));
-int  main            OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Display error message and exit
- */
-void error(msg)
-    const char *msg;
-{
-    fprintf(stderr, "%s: %s\n", prog, msg);
-    exit(1);
-}
-
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-void gz_compress(in, out)
-    FILE   *in;
-    gzFile out;
-{
-    local char buf[BUFLEN];
-    int len;
-    int err;
-
-    for (;;) {
-        len = fread(buf, 1, sizeof(buf), in);
-        if (ferror(in)) {
-            perror("fread");
-            exit(1);
-        }
-        if (len == 0) break;
-
-        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
-    }
-    fclose(in);
-    if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
-/* ===========================================================================
- * Uncompress input to output then close both files.
- */
-void gz_uncompress(in, out)
-    gzFile in;
-    FILE   *out;
-{
-    local char buf[BUFLEN];
-    int len;
-    int err;
-
-    for (;;) {
-        len = gzread(in, buf, sizeof(buf));
-        if (len < 0) error (gzerror(in, &err));
-        if (len == 0) break;
-
-        if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
-	    error("failed fwrite");
-	}
-    }
-    if (fclose(out)) error("failed fclose");
-
-    if (gzclose(in) != Z_OK) error("failed gzclose");
-}
-
-
-/* ===========================================================================
- * Compress the given file: create a corresponding .gz file and remove the
- * original.
- */
-void file_compress(file)
-    char  *file;
-{
-    local char outfile[MAX_NAME_LEN];
-    FILE  *in;
-    gzFile out;
-
-    strcpy(outfile, file);
-    strcat(outfile, GZ_SUFFIX);
-
-    in = fopen(file, "rb");
-    if (in == NULL) {
-        perror(file);
-        exit(1);
-    }
-    out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */
-    if (out == NULL) {
-        fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
-        exit(1);
-    }
-    gz_compress(in, out);
-
-    unlink(file);
-}
-
-
-/* ===========================================================================
- * Uncompress the given file and remove the original.
- */
-void file_uncompress(file)
-    char  *file;
-{
-    local char buf[MAX_NAME_LEN];
-    char *infile, *outfile;
-    FILE  *out;
-    gzFile in;
-    int len = strlen(file);
-
-    strcpy(buf, file);
-
-    if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
-        infile = file;
-        outfile = buf;
-        outfile[len-3] = '\0';
-    } else {
-        outfile = file;
-        infile = buf;
-        strcat(infile, GZ_SUFFIX);
-    }
-    in = gzopen(infile, "rb");
-    if (in == NULL) {
-        fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
-        exit(1);
-    }
-    out = fopen(outfile, "wb");
-    if (out == NULL) {
-        perror(file);
-        exit(1);
-    }
-
-    gz_uncompress(in, out);
-
-    unlink(infile);
-}
-
-
-/* ===========================================================================
- * Usage:  minigzip [-d] [files...]
- */
-
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int uncompr = 0;
-    gzFile file;
-
-    prog = argv[0];
-    argc--, argv++;
-
-    if (argc > 0) {
-        uncompr = (strcmp(*argv, "-d") == 0);
-        if (uncompr) {
-            argc--, argv++;
-        }
-    }
-    if (argc == 0) {
-        SET_BINARY_MODE(stdin);
-        SET_BINARY_MODE(stdout);
-        if (uncompr) {
-            file = gzdopen(fileno(stdin), "rb");
-            if (file == NULL) error("can't gzdopen stdin");
-            gz_uncompress(file, stdout);
-        } else {
-            file = gzdopen(fileno(stdout), "wb"); /* "wb9" for max compr. */
-            if (file == NULL) error("can't gzdopen stdout");
-            gz_compress(stdin, file);
-        }
-    } else {
-        do {
-            if (uncompr) {
-                file_uncompress(*argv);
-            } else {
-                file_compress(*argv);
-            }
-        } while (argv++, --argc);
-    }
-    exit(0);
-    return 0; /* to avoid warning */
-}
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.b32 b/gnu/usr.bin/cvs/zlib/msdos/Makefile.b32
deleted file mode 100644
index f476da91649..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.b32
+++ /dev/null
@@ -1,104 +0,0 @@
-# Makefile for zlib
-# Borland C++   
-
-# This version of the zlib makefile was adapted by Chris Young for use
-# with Borland C 4.5x with the Dos Power Pack for a 32-bit protected mode
-# flat memory model.  It was created for use with POV-Ray ray tracer and
-# you may choose to edit the CFLAGS to suit your needs but the
-# switches -WX and -DMSDOS are required.
-# -- Chris Young 76702.1655@compuserve.com
-
-# To use, do "make -fmakefile.b32"
-
-# See zconf.h for details about the memory requirements.
-
-# ------------- Borland C++ -------------
-MODEL=-WX 
-CFLAGS= $(MODEL) -P-C -K -N- -k- -d -3 -r- -v- -f -DMSDOS
-CC=bcc32
-LD=bcc32
-LIB=tlib
-LDFLAGS= $(MODEL)
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	del zlib.lib
-	$(LIB) zlib +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.bor b/gnu/usr.bin/cvs/zlib/msdos/Makefile.bor
deleted file mode 100644
index f5651b40fec..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.bor
+++ /dev/null
@@ -1,125 +0,0 @@
-# Makefile for zlib
-# Borland C++   ************ UNTESTED ***********
-
-# To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=s
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Turbo C++, Borland C++ -------------
-
-#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-#    to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# Memory model: one of s, m, c, l (small, medium, compact, large)
-MODEL=l
-
-CC=bcc
-#   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-LD=$(CC)
-AR=tlib
-
-# compiler flags
-CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
-#   replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
-
-LDFLAGS=-m$(MODEL)
-
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-ZLIB_H = zlib.h zconf.h
-ZUTIL_H = zutil.h $(ZLIB_H)
-
-ZLIB_LIB = zlib_$(MODEL).lib
-
-all: test
-
-# individual dependencies and action rules:
-adler32.obj: adler32.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c $(ZUTIL_H) infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	del $(ZLIB_LIB)
-	$(AR) $(ZLIB_LIB) +$(OBJP1)
-	$(AR) $(ZLIB_LIB) +$(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.dj2 b/gnu/usr.bin/cvs/zlib/msdos/Makefile.dj2
deleted file mode 100644
index 0ab431c8a11..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.dj2
+++ /dev/null
@@ -1,100 +0,0 @@
-# Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.dj2;  make test -fmakefile.dj2
-# 
-# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
-# 
-#    make install -fmakefile.dj2
-# 
-# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
-# in the sample below if the pattern of the DJGPP distribution is to
-# be followed.  Remember that, while <sp>'es around <=> are ignored in
-# makefiles, they are *not* in batch files or in djgpp.env.
-# - - - - -
-# [make]
-# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
-# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
-# BUTT=-m486
-# - - - - -
-# Alternately, these variables may be defined below, overriding the values
-# in djgpp.env, as
-# INCLUDE_PATH=c:\usr\include
-# LIBRARY_PATH=c:\usr\lib
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lz
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
-
-.PHONY : uninstall clean
-
-install: $(INCL) $(LIBS)
-	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
-	$(INSTALL) zlib.h $(INCLUDE_PATH)
-	$(INSTALL) zconf.h $(INCLUDE_PATH)
-	$(INSTALL) libz.a $(LIBRARY_PATH)
-
-uninstall:
-	$(RM) $(INCLUDE_PATH)\zlib.h
-	$(RM) $(INCLUDE_PATH)\zconf.h
-	$(RM) $(LIBRARY_PATH)\libz.a
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) libz.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.emx b/gnu/usr.bin/cvs/zlib/msdos/Makefile.emx
deleted file mode 100644
index 0e5e5cc4338..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.emx
+++ /dev/null
@@ -1,69 +0,0 @@
-# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.emx;  make test -fmakefile.emx
-# 
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) zlib.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.msc b/gnu/usr.bin/cvs/zlib/msdos/Makefile.msc
deleted file mode 100644
index 562201d87ea..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.msc
+++ /dev/null
@@ -1,121 +0,0 @@
-# Makefile for zlib
-# Microsoft C 5.1 or later
-
-# To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=S
-
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to the LOC macro below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Microsoft C 5.1 and later -------------
-
-#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
-#    to the declaration of LOC here:
-LOC = $(LOCAL_ZLIB)
-
-# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
-CPU_TYP = 0
-
-# Memory model: one of S, M, C, L (small, medium, compact, large)
-MODEL=L
-
-CC=cl
-CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
-#-Ox generates bad code with MSC 5.1
-LIB_CFLAGS=-Zl $(CFLAGS)
-
-LD=link
-LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
-# "/farcall/packcode" are only useful for `large code' memory models
-# but should be a "no-op" for small code models.
-
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-ZLIB_H = zlib.h zconf.h
-ZUTIL_H = zutil.h $(ZLIB_H)
-
-ZLIB_LIB = zlib_$(MODEL).lib
-
-all:  $(ZLIB_LIB) example.exe minigzip.exe
-
-# individual dependencies and action rules:
-adler32.obj: adler32.c $(ZLIB_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-compress.obj: compress.c $(ZLIB_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-crc32.obj: crc32.c $(ZLIB_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-gzio.obj: gzio.c $(ZUTIL_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-inflate.obj: inflate.c $(ZUTIL_H) infblock.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-uncompr.obj: uncompr.c $(ZLIB_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-zutil.obj: zutil.c $(ZUTIL_H)
-	$(CC) -c $(LIB_CFLAGS) $*.c
-
-example.obj: example.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	if exist $(ZLIB_LIB) del $(ZLIB_LIB)
-	lib $(ZLIB_LIB) $(OBJ1);
-	lib $(ZLIB_LIB) $(OBJ2);
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.tc b/gnu/usr.bin/cvs/zlib/msdos/Makefile.tc
deleted file mode 100644
index 63e0550359f..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.tc
+++ /dev/null
@@ -1,108 +0,0 @@
-# Makefile for zlib
-# TurboC 2.0
-
-# To use, do "make -fmakefile.tc"
-# To compile in small model, set below: MODEL=-ms
-
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below:
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Turbo C 2.0 -------------
-MODEL=l
-# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z -m$(MODEL)
-CC=tcc -I\tc\include
-LD=tcc -L\tc\lib
-AR=tlib
-LDFLAGS=-m$(MODEL) -f-
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-ZLIB_H = zlib.h zconf.h
-ZUTIL_H = zutil.h $(ZLIB_H)
-
-ZLIB_LIB = zlib_$(MODEL).lib
-
-all: test
-
-adler32.obj: adler32.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c $(ZUTIL_H) infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c $(ZUTIL_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	del $(ZLIB_LIB)
-	$(AR) $(ZLIB_LIB) +$(OBJP1)
-	$(AR) $(ZLIB_LIB) +$(OBJP2)
-
-example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eexample.exe example.obj $(ZLIB_LIB)
-
-minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj $(ZLIB_LIB)
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.w32 b/gnu/usr.bin/cvs/zlib/msdos/Makefile.w32
deleted file mode 100644
index 0a05fa9a469..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.w32
+++ /dev/null
@@ -1,97 +0,0 @@
-# Makefile for zlib
-# Microsoft 32-bit Visual C++ 4.0 or later (may work on earlier versions)
-
-# To use, do "nmake /f makefile.w32"
-
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
-# See zconf.h for details about the memory requirements.
-
-# ------------- Microsoft Visual C++ 4.0 and later -------------
-MODEL=
-CFLAGS=-Ox -GA3s -nologo -W3
-CC=cl
-LD=link
-LDFLAGS=
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
-  infutil$(O)+inffast$(O)
-
-all:  zlib.lib example.exe minigzip.exe
-
-adler32.obj: adler32.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-  $(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-  $(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-  $(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-  $(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-  $(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-  $(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-  $(CC) -c $(CFLAGS) $*.c
-
-zlib.lib: $(OBJ1) $(OBJ2)
-  if exist zlib.lib del zlib.lib
-  lib /OUT:zlib.lib $(OBJ1) $(OBJ2)
-
-example.exe: example.obj zlib.lib
-  $(LD) $(LDFLAGS) example.obj zlib.lib /OUT:example.exe /SUBSYSTEM:CONSOLE
-
-minigzip.exe: minigzip.obj zlib.lib
-  $(LD) $(LDFLAGS) minigzip.obj zlib.lib /OUT:minigzip.exe /SUBSYSTEM:CONSOLE
-
-test: example.exe minigzip.exe
-  example
-  echo hello world | minigzip | minigzip -d 
-
-#clean:
-#  del *.obj
-#  del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/Makefile.wat b/gnu/usr.bin/cvs/zlib/msdos/Makefile.wat
deleted file mode 100644
index 44bf8607f6f..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/Makefile.wat
+++ /dev/null
@@ -1,103 +0,0 @@
-# Makefile for zlib
-# Watcom 10a
-
-# This version of the zlib makefile was adapted by Chris Young for use
-# with Watcom 10a 32-bit protected mode flat memory model.  It was created 
-# for use with POV-Ray ray tracer and you may choose to edit the CFLAGS to 
-# suit your needs but the -DMSDOS is required.
-# -- Chris Young 76702.1655@compuserve.com
-
-# To use, do "wmake -f makefile.wat"
-
-# See zconf.h for details about the memory requirements.
-
-# ------------- Watcom 10a -------------
-MODEL=-mf 
-CFLAGS= $(MODEL) -fpi87 -fp5 -zp4 -5r -w5 -oneatx -DMSDOS
-CC=wcc386
-LD=wcl386
-LIB=wlib -b -c 
-LDFLAGS= 
-O=.obj
-
-# variables
-OBJ1=adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) 
-OBJ2=trees$(O) zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) 
-OBJ3=infutil$(O) inffast$(O)
-OBJP1=adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)
-OBJP2=trees$(O)+zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)
-OBJP3=infutil$(O)+inffast$(O)
-
-all: test
-
-adler32.obj: adler32.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h &
-  infcodes.h infutil.h
-	$(CC) $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h &
-  infcodes.h inffast.h
-	$(CC) $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) $(CFLAGS) $*.c
-
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2) $(OBJ3) 
-	del zlib.lib
-	$(LIB) zlib.lib +$(OBJP1)
-	$(LIB) zlib.lib +$(OBJP2)
-	$(LIB) zlib.lib +$(OBJP3)
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: minigzip.exe example.exe
-	example
-	echo hello world | minigzip | minigzip -d >test
-	type test
-
-#clean:
-#	del *.obj
-#	del *.exe
diff --git a/gnu/usr.bin/cvs/zlib/msdos/zlib.def b/gnu/usr.bin/cvs/zlib/msdos/zlib.def
deleted file mode 100644
index 6c04412f9b0..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/zlib.def
+++ /dev/null
@@ -1,60 +0,0 @@
-LIBRARY		"zlib"
-
-DESCRIPTION	'"""zlib data compression library"""'
-
-EXETYPE		NT
-
-SUBSYSTEM	WINDOWS
-
-STUB		'WINSTUB.EXE'
-
-VERSION		1.13
-
-CODE		 EXECUTE READ
-
-DATA		 READ WRITE
-
-HEAPSIZE	1048576,4096
-
-EXPORTS
-    adler32                        @1
-    compress                       @2
-    crc32                          @3
-    deflate                        @4
-    deflateCopy                    @5
-    deflateEnd                     @6
-    deflateInit2_                  @7
-    deflateInit_                   @8
-    deflateParams                  @9
-    deflateReset                   @10
-    deflateSetDictionary           @11
-    gzclose                        @12
-    gzdopen                        @13
-    gzerror                        @14
-    gzflush                        @15
-    gzopen                         @16
-    gzread                         @17
-    gzwrite                        @18
-    inflate                        @19
-    inflateEnd                     @20
-    inflateInit2_                  @21
-    inflateInit_                   @22
-    inflateReset                   @23
-    inflateSetDictionary           @24
-    inflateSync                    @25
-    uncompress                     @26
-    zlibVersion                    @27
-    gzprintf                       @28
-    gzputc                         @29
-    gzgetc                         @30
-    gzseek                         @31
-    gzrewind                       @32
-    gztell                         @33
-    gzeof                          @34
-    gzsetparams                    @35
-    zError                         @36
-    inflateSyncPoint               @37
-    get_crc_table                  @38
-    compress2                      @39
-    gzputs                         @40
-    gzgets                         @41
diff --git a/gnu/usr.bin/cvs/zlib/msdos/zlib.rc b/gnu/usr.bin/cvs/zlib/msdos/zlib.rc
deleted file mode 100644
index 556d4ff950a..00000000000
--- a/gnu/usr.bin/cvs/zlib/msdos/zlib.rc
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <windows.h>
-
-#define IDR_VERSION1  1
-IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,1,3,0
-  PRODUCTVERSION 1,1,3,0
-  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
-  FILEFLAGS	0
-  FILEOS	VOS_DOS_WINDOWS32
-  FILETYPE	VFT_DLL
-  FILESUBTYPE	0	// not used
-BEGIN
-  BLOCK "StringFileInfo"
-  BEGIN
-    BLOCK "040904E4"
-    //language ID = U.S. English, char set = Windows, Multilingual
-
-    BEGIN
-      VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.1.3\0"
-      VALUE "InternalName",	"zlib\0"
-      VALUE "OriginalFilename",	"zlib.dll\0"
-      VALUE "ProductName",	"ZLib.DLL\0"
-      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0"
-    END
-  END
-  BLOCK "VarFileInfo"
-  BEGIN
-    VALUE "Translation", 0x0409, 1252
-  END
-END
diff --git a/gnu/usr.bin/cvs/zlib/nt/Makefile.emx b/gnu/usr.bin/cvs/zlib/nt/Makefile.emx
deleted file mode 100644
index 2d475b1847e..00000000000
--- a/gnu/usr.bin/cvs/zlib/nt/Makefile.emx
+++ /dev/null
@@ -1,138 +0,0 @@
-# Makefile for zlib.  Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.emx;  make test -fmakefile.emx
-# 
-
-CC=gcc -Zwin32
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) zlib.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
-# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.emx;  make test -fmakefile.emx
-# 
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lzlib
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=zlib.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-zlib.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-
-.PHONY : clean
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) zlib.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
diff --git a/gnu/usr.bin/cvs/zlib/nt/Makefile.gcc b/gnu/usr.bin/cvs/zlib/nt/Makefile.gcc
deleted file mode 100644
index cdd652f2360..00000000000
--- a/gnu/usr.bin/cvs/zlib/nt/Makefile.gcc
+++ /dev/null
@@ -1,87 +0,0 @@
-# Makefile for zlib.  Modified for mingw32 by C. Spieler, 6/16/98.
-# (This Makefile is directly derived from Makefile.dj2)
-# Copyright (C) 1995-1998 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile, or to compile and test, type:
-# 
-#   make -fmakefile.gcc;  make test -fmakefile.gcc
-# 
-# To install libz.a, zconf.h and zlib.h in the mingw32 directories, type:
-# 
-#    make install -fmakefile.gcc
-# 
-
-CC=gcc
-
-#CFLAGS=-MMD -O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-MMD -g -DDEBUG
-CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-             -Wstrict-prototypes -Wmissing-prototypes
-
-# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=copy /Y
-# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-RM=del
-LDLIBS=-L. -lz
-LD=$(CC) -s -o
-LDSHARED=$(CC)
-
-INCL=zlib.h zconf.h
-LIBS=libz.a
-
-AR=ar rcs
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example.exe minigzip.exe
-
-test: all
-	./example
-	echo hello world | .\minigzip | .\minigzip -d 
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-
-%.exe : %.o $(LIBS)
-	$(LD) $@ $< $(LDLIBS)
-
-# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
-
-.PHONY : uninstall clean
-
-install: $(INCL) $(LIBS)
-	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
-	$(INSTALL) zlib.h $(INCLUDE_PATH)
-	$(INSTALL) zconf.h $(INCLUDE_PATH)
-	$(INSTALL) libz.a $(LIBRARY_PATH)
-
-uninstall:
-	$(RM) $(INCLUDE_PATH)\zlib.h
-	$(RM) $(INCLUDE_PATH)\zconf.h
-	$(RM) $(LIBRARY_PATH)\libz.a
-
-clean:
-	$(RM) *.d
-	$(RM) *.o
-	$(RM) *.exe
-	$(RM) libz.a
-	$(RM) foo.gz
-
-DEPS := $(wildcard *.d)
-ifneq ($(DEPS),)
-include $(DEPS)
-endif
diff --git a/gnu/usr.bin/cvs/zlib/nt/Makefile.nt b/gnu/usr.bin/cvs/zlib/nt/Makefile.nt
deleted file mode 100644
index b250f2ac7d2..00000000000
--- a/gnu/usr.bin/cvs/zlib/nt/Makefile.nt
+++ /dev/null
@@ -1,88 +0,0 @@
-# Makefile for zlib
-
-!include <ntwin32.mak>
-
-CC=cl
-LD=link
-CFLAGS=-O -nologo
-LDFLAGS=
-O=.obj
-
-# variables
-OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
-  trees$(O)
-OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
-  infutil$(O) inffast$(O)
-
-all:  zlib.dll example.exe minigzip.exe
-
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
-
-zlib.dll: $(OBJ1) $(OBJ2) zlib.dnt
-	link $(dlllflags) -out:$@ -def:zlib.dnt $(OBJ1) $(OBJ2) $(guilibsdll)
-
-zlib.lib: zlib.dll
-
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj zlib.lib
-
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
-
-test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
-
-clean:
-	del *.obj
-	del *.exe
-	del *.dll
-	del *.lib
diff --git a/gnu/usr.bin/cvs/zlib/nt/zlib.dnt b/gnu/usr.bin/cvs/zlib/nt/zlib.dnt
deleted file mode 100644
index 7f9475cfb0e..00000000000
--- a/gnu/usr.bin/cvs/zlib/nt/zlib.dnt
+++ /dev/null
@@ -1,47 +0,0 @@
-LIBRARY		zlib.dll
-EXETYPE WINDOWS
-CODE		 PRELOAD MOVEABLE DISCARDABLE
-DATA		 PRELOAD MOVEABLE MULTIPLE
-
-EXPORTS
-    adler32                        @1
-    compress                       @2
-    crc32                          @3
-    deflate                        @4
-    deflateCopy                    @5
-    deflateEnd                     @6
-    deflateInit2_                  @7
-    deflateInit_                   @8
-    deflateParams                  @9
-    deflateReset                   @10
-    deflateSetDictionary           @11
-    gzclose                        @12
-    gzdopen                        @13
-    gzerror                        @14
-    gzflush                        @15
-    gzopen                         @16
-    gzread                         @17
-    gzwrite                        @18
-    inflate                        @19
-    inflateEnd                     @20
-    inflateInit2_                  @21
-    inflateInit_                   @22
-    inflateReset                   @23
-    inflateSetDictionary           @24
-    inflateSync                    @25
-    uncompress                     @26
-    zlibVersion                    @27
-    gzprintf                       @28
-    gzputc                         @29
-    gzgetc                         @30
-    gzseek                         @31
-    gzrewind                       @32
-    gztell                         @33
-    gzeof                          @34
-    gzsetparams                    @35
-    zError                         @36
-    inflateSyncPoint               @37
-    get_crc_table                  @38
-    compress2                      @39
-    gzputs                         @40
-    gzgets                         @41
diff --git a/gnu/usr.bin/cvs/zlib/os2/Makefile.os2 b/gnu/usr.bin/cvs/zlib/os2/Makefile.os2
deleted file mode 100644
index 4f569471eca..00000000000
--- a/gnu/usr.bin/cvs/zlib/os2/Makefile.os2
+++ /dev/null
@@ -1,136 +0,0 @@
-# Makefile for zlib under OS/2 using GCC (PGCC)
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# To compile and test, type:
-#   cp Makefile.os2 ..
-#   cd ..
-#   make -f Makefile.os2 test
-
-# This makefile will build a static library z.lib, a shared library
-# z.dll and a import library zdll.lib. You can use either z.lib or
-# zdll.lib by specifying either -lz or -lzdll on gcc's command line
-
-CC=gcc -Zomf -s
-
-CFLAGS=-O6 -Wall
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-#################### BUG WARNING: #####################
-## infcodes.c hits a bug in pgcc-1.0, so you have to use either
-## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
-## This bug is reportedly fixed in pgcc >1.0, but this was not tested
-CFLAGS+=-fno-force-mem
-
-LDFLAGS=-s -L. -lzdll -Zcrtdll
-LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
-
-VER=1.1.0
-ZLIB=z.lib
-SHAREDLIB=z.dll
-SHAREDLIBIMP=zdll.lib
-LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
-
-AR=emxomfar cr
-IMPLIB=emximp
-RANLIB=echo
-TAR=tar
-SHELL=bash
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
-  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
-  contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
-
-all: example.exe minigzip.exe
-
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-$(ZLIB): $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-$(SHAREDLIB): $(OBJS) os2/z.def
-	$(LDSHARED) -o $@ $^
-
-$(SHAREDLIBIMP): os2/z.def
-	$(IMPLIB) -o $@ $^
-
-example.exe: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip.exe: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
-
-distclean:	clean
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:	
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h  
diff --git a/gnu/usr.bin/cvs/zlib/os2/zlib.def b/gnu/usr.bin/cvs/zlib/os2/zlib.def
deleted file mode 100644
index 4c753f1a3b9..00000000000
--- a/gnu/usr.bin/cvs/zlib/os2/zlib.def
+++ /dev/null
@@ -1,51 +0,0 @@
-;
-; Slightly modified version of ../nt/zlib.dnt :-)
-;
-
-LIBRARY		Z
-DESCRIPTION	"Zlib compression library for OS/2"
-CODE		PRELOAD MOVEABLE DISCARDABLE
-DATA		PRELOAD MOVEABLE MULTIPLE
-
-EXPORTS
-    adler32
-    compress
-    crc32
-    deflate
-    deflateCopy
-    deflateEnd
-    deflateInit2_
-    deflateInit_
-    deflateParams
-    deflateReset
-    deflateSetDictionary
-    gzclose
-    gzdopen
-    gzerror
-    gzflush
-    gzopen
-    gzread
-    gzwrite
-    inflate
-    inflateEnd
-    inflateInit2_
-    inflateInit_
-    inflateReset
-    inflateSetDictionary
-    inflateSync
-    uncompress
-    zlibVersion
-    gzprintf
-    gzputc
-    gzgetc
-    gzseek
-    gzrewind
-    gztell
-    gzeof
-    gzsetparams
-    zError
-    inflateSyncPoint
-    get_crc_table
-    compress2
-    gzputs
-    gzgets
diff --git a/gnu/usr.bin/cvs/zlib/trees.c b/gnu/usr.bin/cvs/zlib/trees.c
deleted file mode 100644
index ce3cfd4cc17..00000000000
--- a/gnu/usr.bin/cvs/zlib/trees.c
+++ /dev/null
@@ -1,1141 +0,0 @@
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* $Id: trees.c,v 1.1 1996/10/18 03:35:05 tholo Exp $ */
-
-#include "deflate.h"
-
-#ifdef DEBUG
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local void set_data_type  OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifndef DEBUG
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG */
-#  define send_code(s, c, tree) \
-     { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (value << s->bi_valid);
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (val << s->bi_valid);\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
- */
-local void tr_static_init()
-{
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->compressed_len = 0L;
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-        s->compressed_len += 10L;
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-ulg _tr_flush_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-	 /* Check if the file is ascii or binary */
-	if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
-	/* Construct the literal and distance trees */
-	build_tree(s, (tree_desc *)(&(s->l_desc)));
-	Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-
-	build_tree(s, (tree_desc *)(&(s->d_desc)));
-	Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-	/* At this point, opt_len and static_len are the total bit lengths of
-	 * the compressed block data, excluding the tree representations.
-	 */
-
-	/* Build the bit length tree for the above two trees, and get the index
-	 * in bl_order of the last bit length code to send.
-	 */
-	max_blindex = build_bl_tree(s);
-
-	/* Determine the best encoding. Compute first the block length in bytes*/
-	opt_lenb = (s->opt_len+3+7)>>3;
-	static_lenb = (s->static_len+3+7)>>3;
-
-	Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-		opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-		s->last_lit));
-
-	if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+eof, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-        s->compressed_len += 3 + s->static_len;
-    } else {
-        send_bits(s, (DYN_TREES<<1)+eof, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-        s->compressed_len += 3 + s->opt_len;
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    init_block(s);
-
-    if (eof) {
-        bi_windup(s);
-        s->compressed_len += 7;  /* align on byte boundary */
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-    /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
-    deflate_state *s;
-{
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);   
-        put_short(s, (ush)~len);
-#ifdef DEBUG
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
diff --git a/gnu/usr.bin/cvs/zlib/trees.h b/gnu/usr.bin/cvs/zlib/trees.h
deleted file mode 100644
index 72facf900f7..00000000000
--- a/gnu/usr.bin/cvs/zlib/trees.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* header created automatically with -DGEN_TREES_H */
-
-local const ct_data static_ltree[L_CODES+2] = {
-{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
-{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
-{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
-{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
-{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
-{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
-{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
-{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
-{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
-{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
-{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
-{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
-{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
-{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
-{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
-{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
-{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
-{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
-{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
-{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
-{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
-{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
-{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
-{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
-{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
-{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
-{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
-{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
-{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
-{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
-{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
-{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
-{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
-{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
-{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
-{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
-{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
-{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
-{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
-{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
-{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
-{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
-{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
-{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
-{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
-{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
-{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
-{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
-{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
-{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
-{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
-{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
-{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
-{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
-{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
-{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
-{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
-{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
-};
-
-local const ct_data static_dtree[D_CODES] = {
-{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
-{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
-{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
-{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
-{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
-{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
-};
-
-const uch _dist_code[DIST_CODE_LEN] = {
- 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
- 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
-10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
-11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
-18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
-};
-
-const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
- 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
-13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
-19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
-22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
-};
-
-local const int base_length[LENGTH_CODES] = {
-0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
-64, 80, 96, 112, 128, 160, 192, 224, 0
-};
-
-local const int base_dist[D_CODES] = {
-    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
-   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
- 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
-};
-
diff --git a/gnu/usr.bin/cvs/zlib/uncompr.c b/gnu/usr.bin/cvs/zlib/uncompr.c
deleted file mode 100644
index ca9b1f810ed..00000000000
--- a/gnu/usr.bin/cvs/zlib/uncompr.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: uncompr.c,v 1.1 1996/10/18 03:35:06 tholo Exp $ */
-
-#include "zlib.h"
-
-/* ===========================================================================
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-int uncompress (dest, destLen, source, sourceLen)
-    Bytef *dest;
-    uLongf *destLen;
-    const Bytef *source;
-    uLong sourceLen;
-{
-    z_stream stream;
-    int err;
-
-    stream.next_in = (Bytef*)source;
-    stream.avail_in = (uInt)sourceLen;
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-
-    err = inflateInit(&stream);
-    if (err != Z_OK) return err;
-
-    err = inflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        inflateEnd(&stream);
-        return err;
-    }
-    *destLen = stream.total_out;
-
-    err = inflateEnd(&stream);
-    return err;
-}
diff --git a/gnu/usr.bin/cvs/zlib/zconf.h b/gnu/usr.bin/cvs/zlib/zconf.h
deleted file mode 100644
index 116b9d6502f..00000000000
--- a/gnu/usr.bin/cvs/zlib/zconf.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: zconf.h,v 1.1 1996/10/18 03:35:06 tholo Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-#  define deflateInit_	z_deflateInit_
-#  define deflate	z_deflate
-#  define deflateEnd	z_deflateEnd
-#  define inflateInit_ 	z_inflateInit_
-#  define inflate	z_inflate
-#  define inflateEnd	z_inflateEnd
-#  define deflateInit2_	z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy	z_deflateCopy
-#  define deflateReset	z_deflateReset
-#  define deflateParams	z_deflateParams
-#  define inflateInit2_	z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync	z_inflateSync
-#  define inflateReset	z_inflateReset
-#  define compress	z_compress
-#  define uncompress	z_uncompress
-#  define adler32	z_adler32
-#  define crc32		z_crc32
-#  define get_crc_table z_get_crc_table
-
-#  define Byte		z_Byte
-#  define uInt		z_uInt
-#  define uLong		z_uLong
-#  define Bytef	        z_Bytef
-#  define charf		z_charf
-#  define intf		z_intf
-#  define uIntf		z_uIntf
-#  define uLongf	z_uLongf
-#  define voidpf	z_voidpf
-#  define voidp		z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
-#  endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
-#  endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-#  define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR __far
-#  else
-#    define FAR far
-#  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
-#    define SMALL_MEDIUM
-#    define FAR __far
-#  endif
-#endif
-#ifndef FAR
-#   define FAR
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
-   /* Borland C/C++ ignores FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-#  include <windows.h>
-#  define EXPORT  WINAPI
-#else
-#  define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
diff --git a/gnu/usr.bin/cvs/zlib/zlib.3 b/gnu/usr.bin/cvs/zlib/zlib.3
deleted file mode 100644
index 25c8495d25f..00000000000
--- a/gnu/usr.bin/cvs/zlib/zlib.3
+++ /dev/null
@@ -1,107 +0,0 @@
-.TH ZLIB 3 "9 July 1998"
-.SH NAME
-zlib \- compression/decompression library
-.SH SYNOPSIS
-[see
-.I zlib.h
-for full description]
-.SH DESCRIPTION
-The
-.I zlib
-library is a general purpose data compression library.
-The code is thread safe.
-It provides in-memory compression and decompression functions,
-including integrity checks of the uncompressed data.
-This version of the library supports only one compression method (deflation)
-but other algorithms will be added later and will have the same stream interface.
-.LP
-Compression can be done in a single step if the buffers are large enough
-(for example if an input file is mmap'ed),
-or can be done by repeated calls of the compression function.
-In the latter case,
-the application must provide more input and/or consume the output
-(providing more output space) before each call.
-.LP
-The library also supports reading and writing files in
-.I gzip
-(.gz) format
-with an interface similar to that of stdio.
-.LP
-The library does not install any signal handler. The decoder checks
-the consistency of the compressed data, so the library should never
-crash even in case of corrupted input.
-.LP
-All functions of the compression library are documented in the file
-.IR zlib.h.
-The distribution source includes examples of use of the library
-the files
-.I example.c
-and
-.IR minigzip.c .
-.LP
-A Java implementation of
-.IR zlib
-is available in the Java Development Kit 1.1
-.IP
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-.LP
-A Perl interface to
-.IR zlib ,
-written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
-is available at CPAN (Comprehensive Perl Archive Network) sites,
-such as:
-.IP
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
-.LP
-A Python interface to
-.IR zlib
-written by A.M. Kuchling <amk@magnet.com>
-is available from the Python Software Association sites, such as:
-.IP
-ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
-.SH "SEE ALSO"
-Questions about zlib should be sent to:
-.IP
-zlib@quest.jpl.nasa.gov
-or, if this fails, to the author addresses given below.
-The zlib home page is:
-.IP
-http://www.cdrom.com/pub/infozip/zlib/
-.LP
-The data format used by the zlib library is described by RFC
-(Request for Comments) 1950 to 1952 in the files: 
-.IP
-ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
-.br
-rfc1951.txt (deflate format)
-.br
-rfc1952.txt (gzip format)
-.LP
-These documents are also available in other formats from:
-.IP
-ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-.SH AUTHORS
-Version 1.1.3
-Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
-and Mark Adler (madler@alumni.caltech.edu).
-.LP
-This software is provided "as-is,"
-without any express or implied warranty.
-In no event will the authors be held liable for any damages
-arising from the use of this software.
-See the distribution directory with respect to requirements
-governing redistribution.
-The deflate format used by
-.I zlib
-was defined by Phil Katz.
-The deflate and
-.I zlib
-specifications were written by L. Peter Deutsch.
-Thanks to all the people who reported problems and suggested various
-improvements in
-.IR zlib ;
-who are too numerous to cite here.
-.LP
-UNIX manual page by R. P. C. Rodgers,
-U.S. National Library of Medicine (rodgers@nlm.nih.gov).
-.\" end of man page
diff --git a/gnu/usr.bin/cvs/zlib/zlib.h b/gnu/usr.bin/cvs/zlib/zlib.h
deleted file mode 100644
index 337fe9fe8a3..00000000000
--- a/gnu/usr.bin/cvs/zlib/zlib.h
+++ /dev/null
@@ -1,780 +0,0 @@
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.4, Jul 24th, 1996.
-
-  Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "zconf.h"
-
-#define ZLIB_VERSION "1.0.4"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_SYNC_FLUSH    2
-#define Z_FULL_FLUSH    3
-#define Z_FINISH        4
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-                        /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
- */
-
-/* 
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
-  output is byte aligned (the compressor can clear its internal bit buffer)
-  and the current block is always terminated; this can be useful if the
-  compressor has to be restarted from scratch after an interruption (in which
-  case the internal state of the compressor may be lost).
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/* 
-extern int EXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
-   allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
-   with the version assumed by the caller.  msg is set to null if there is no
-   error message. inflateInit does not perform any decompression: this will be
-   done by inflate().
-*/
-
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much
-  output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush parameter other than Z_PARTIAL_FLUSH
-  and Z_FINISH, but the current implementation actually flushes as much output
-  as possible anyway.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
-  application may then call inflateSync to look for a good compression block.
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
-  dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*   
-extern int EXPORT deflateInit2 OF((z_streamp strm,
-                                   int  level,
-                                   int  method,
-                                   int  windowBits,
-                                   int  memLevel,
-                                   int  strategy));
-
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
-*/
-                            
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
-                                           const Bytef *dictionary,
-				           uInt  dictLength));
-/*
-     Initializes the compression dictionary (history buffer) from the given
-   byte sequence without producing any compressed output. This function must
-   be called immediately after deflateInit or deflateInit2, before any call
-   of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
-   can be predicted with good accuracy; the data can then be compressed better
-   than with the default empty dictionary. In this version of the library,
-   only the last 32K bytes of the dictionary are used.
-     Upon return of this function, strm->adler is set to the Adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
-   is inconsistent (for example if deflate has already been called for this
-   stream). deflateSetDictionary does not perform any compression: this will
-   be done by deflate(). 
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
-                                  z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
-     Dynamically update the compression level and compression strategy.
-   This can be used to switch between compression and straight copy of
-   the input data, or to switch to a different kind of input data requiring
-   a different strategy. If the compression level is changed, the input
-   available so far is compressed with the old level (and may be flushed);
-   the new level will take effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
-*/
-
-/*   
-extern int EXPORT inflateInit2 OF((z_streamp strm,
-                                   int  windowBits));
-
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
-				           const Bytef *dictionary,
-					   uInt  dictLength));
-/*
-     Initializes the decompression dictionary (history buffer) from the given
-   uncompressed byte sequence. This function must be called immediately after
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
-   by the compressor can be determined from the Adler32 value returned by this
-   call of inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
-			       const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-				 const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen  OF((const char *path, const char *mode));
-/*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
-   in this case gzread will directly read from the file without decompression.
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
-/*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
-*/
-
-extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
-
-extern int EXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
-*/
-
-extern int EXPORT    gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
-*/
-
-extern int EXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
-			           const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
-				   const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-				    int windowBits, int memLevel, int strategy,
-				    const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-				    const char *version, int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/gnu/usr.bin/cvs/zlib/zutil.c b/gnu/usr.bin/cvs/zlib/zutil.c
deleted file mode 100644
index 647f3fcb0a7..00000000000
--- a/gnu/usr.bin/cvs/zlib/zutil.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* $Id: zutil.c,v 1.1 1996/10/18 03:35:06 tholo Exp $ */
-
-#include <stdio.h>
-
-#include "zutil.h"
-
-struct internal_state      {int dummy;}; /* for buggy compilers */
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-const char *z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char *zlibVersion()
-{
-    return ZLIB_VERSION;
-}
-
-#ifdef DEBUG
-void z_error (m)
-    char *m;
-{
-    fprintf(stderr, "%s\n", m);
-    exit(1);
-}
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
-    Bytef* dest;
-    Bytef* source;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = *source++; /* ??? to be unrolled */
-    } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
-    Bytef* s1;
-    Bytef* s2;
-    uInt  len;
-{
-    uInt j;
-
-    for (j = 0; j < len; j++) {
-        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
-    }
-    return 0;
-}
-
-void zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = 0;  /* ??? to be unrolled */
-    } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-#  define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
-    voidpf org_ptr;
-    voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    voidpf buf = opaque; /* just to make some compilers happy */
-    ulg bsize = (ulg)items*size;
-
-    /* If we allocate less than 65520 bytes, we assume that farmalloc
-     * will return a usable pointer which doesn't have to be normalized.
-     */
-    if (bsize < 65520L) {
-        buf = farmalloc(bsize);
-        if (*(ush*)&buf != 0) return buf;
-    } else {
-        buf = farmalloc(bsize + 16L);
-    }
-    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
-    table[next_ptr].org_ptr = buf;
-
-    /* Normalize the pointer to seg:0 */
-    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
-    *(ush*)&buf = 0;
-    table[next_ptr++].new_ptr = buf;
-    return buf;
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    int n;
-    if (*(ush*)&ptr != 0) { /* object < 64K */
-        farfree(ptr);
-        return;
-    }
-    /* Find the original pointer */
-    for (n = 0; n < next_ptr; n++) {
-        if (ptr != table[n].new_ptr) continue;
-
-        farfree(table[n].org_ptr);
-        while (++n < next_ptr) {
-            table[n-1] = table[n];
-        }
-        next_ptr--;
-        return;
-    }
-    ptr = opaque; /* just to make some compilers happy */
-    Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
-#  define _halloc  halloc
-#  define _hfree   hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    return _halloc((long)items, size);
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
-    if (opaque) items += size - size; /* make compiler happy */
-    return (voidpf)calloc(items, size);
-}
-
-void  zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
-    free(ptr);
-    if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
diff --git a/gnu/usr.bin/cvs/zlib/zutil.h b/gnu/usr.bin/cvs/zlib/zutil.h
deleted file mode 100644
index 8b61332800d..00000000000
--- a/gnu/usr.bin/cvs/zlib/zutil.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* $Id: zutil.h,v 1.1 1996/10/18 03:35:06 tholo Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-#   include <stddef.h>
-#   include <errno.h>
-#else
-    extern int errno;
-#endif
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-#ifdef MSDOS
-#  define OS_CODE  0x00
-#  ifdef __TURBOC__
-#    include <alloc.h>
-#  else /* MSC or DJGPP */
-#    include <malloc.h>
-#  endif
-#endif
-
-#ifdef OS2
-#  define OS_CODE  0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-#  define OS_CODE  0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
-#  define FOPEN(name, mode) \
-     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-#  define OS_CODE  0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
-#endif
-
-#ifdef MACOS
-#  define OS_CODE  0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0F
-#endif
-
-#ifdef TOPS20
-#  define OS_CODE  0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-#  define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-        /* Common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-#ifndef FOPEN
-#  define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
-         /* functions */
-
-#ifdef HAVE_STRERROR
-   extern char *strerror OF((int));
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-#  define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
-  * You may have to use the same strategy for Borland C (untested).
-  */
-#  define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-#    define zmemcpy _fmemcpy
-#    define zmemcmp _fmemcmp
-#    define zmemzero(dest, len) _fmemset(dest, 0, len)
-#  else
-#    define zmemcpy memcpy
-#    define zmemcmp memcmp
-#    define zmemzero(dest, len) memset(dest, 0, len)
-#  endif
-#else
-   extern void zmemcpy  OF((Bytef* dest, Bytef* source, uInt len));
-   extern int  zmemcmp  OF((Bytef* s1,   Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  include <stdio.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-   extern void z_error    OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void   zcfree  OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */