{dip,DIP-} -> DIP; now they're all the same...

2 files changed, 7 insertions, 7 deletions

diff --git a/share/man/man4/man4.sparc64/mgx.4 b/share/man/man4/man4.sparc64/mgx.4
index 16411901d36..15e1b9bc5ed 100644
--- a/share/man/man4/man4.sparc64/mgx.4
+++ b/share/man/man4/man4.sparc64/mgx.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mgx.4,v 1.8 2007/05/31 19:19:57 jmc Exp $
+.\"	$OpenBSD: mgx.4,v 1.9 2007/12/23 22:16:39 jmc Exp $
 .\"
 .\" Copyright (c) 2003, 2005 Miodrag Vallat
 .\"
@@ -23,7 +23,7 @@
 .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: May 31 2007 $
+.Dd $Mdocdate: December 23 2007 $
 .Dt MGX 4 sparc64
 .Os
 .Sh NAME
@@ -54,11 +54,11 @@ they are connected to.
 However, when not connected to a Sun monitor, the device will default to the
 .Xr cgthree 4 -compatible
 1152x900 resolution, with a refresh rate of 66Hz.
-A different resolution can be forced using the set of dip switches
+A different resolution can be forced using the set of DIP switches
 .Pq sometimes covered by metal foil
 located near the SBus connector on the board itself.
 .Pp
-The dip switch settings are as follows:
+The DIP switch settings are as follows:
 .Bl -column "   1   2   3   4" "Resolution" "Refresh"
 .It Li Switches Ta Resolution Ta Refresh Ta Details
 .It Li "  1   2   3   4" Ta "" Ta "Rate" Ta ""
diff --git a/share/man/man4/man4.sparc64/vigra.4 b/share/man/man4/man4.sparc64/vigra.4
index ad6462f3f02..0a0ca4bc492 100644
--- a/share/man/man4/man4.sparc64/vigra.4
+++ b/share/man/man4/man4.sparc64/vigra.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: vigra.4,v 1.3 2007/05/31 19:19:57 jmc Exp $
+.\"	$OpenBSD: vigra.4,v 1.4 2007/12/23 22:16:39 jmc Exp $
 .\" Copyright (c) 2002 Miodrag Vallat.  All rights reserved.
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: May 31 2007 $
+.Dd $Mdocdate: December 23 2007 $
 .Dt VIGRA 4 sparc64
 .Os
 .Sh NAME
@@ -48,7 +48,7 @@ but makes its functions available via the internal
 interface.
 .Pp
 The video resolution and signal synchronization modes are
-selected with four dip switches on the back of the card.
+selected with four DIP switches on the back of the card.
 .Ss VS10 and VS12 Switch Settings:
 The VS10 and VS12 support the following basic modes:
 .Bl -column "Switches" "Resolution" "Refresh"