1000baseTX -> 1000baseT

thanks to miod for pointing this out

5 files changed, 21 insertions, 21 deletions

diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4
index a10e00b8b00..793ab3fee92 100644
--- a/share/man/man4/bge.4
+++ b/share/man/man4/bge.4
@@ -1,4 +1,4 @@
-.\" $OpenBSD: bge.4,v 1.9 2002/11/26 04:39:28 nate Exp $
+.\" $OpenBSD: bge.4,v 1.10 2002/11/26 22:28:20 nate Exp $
 .\" Copyright (c) 2001 Wind River Systems
 .\" Copyright (c) 1997, 1998, 1999, 2000, 2001
 .\"	Bill Paul <wpaul@windriver.com>. All rights reserved.
@@ -99,7 +99,7 @@ full or half duplex.
 The
 .Nm
 driver supports the following media types:
-.Bl -tag -width 1000baseTX
+.Bl -tag -width 1000baseSX
 .It Cm autoselect
 Enable autoselection of the media type and options.
 The user can manually override
@@ -126,8 +126,8 @@ option can also be used to select either
 or
 .Cm half-duplex
 modes.
-.It Cm 1000baseTX
-Set 1000baseTX operation over twisted pair.
+.It Cm 1000baseT
+Set 1000baseT operation over twisted pair.
 .Cm full-duplex
 and
 .Cm half-duplex
@@ -153,10 +153,10 @@ Force half duplex operation.
 .Pp
 The
 .Nm
-driver also supports one special link option for 1000baseTX cards:
+driver also supports one special link option for 1000baseT cards:
 .Bl -tag -width link0
 .It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
+With 1000baseT cards, establishing a link between two ports requires
 that one port be configured as a master and the other a slave.
 With autonegotiation,
 the master/slave settings will be chosen automatically.
diff --git a/share/man/man4/em.4 b/share/man/man4/em.4
index 52965637961..d1cab3f60f0 100644
--- a/share/man/man4/em.4
+++ b/share/man/man4/em.4
@@ -1,4 +1,4 @@
-.\" $OpenBSD: em.4,v 1.4 2002/09/26 07:55:39 miod Exp $
+.\" $OpenBSD: em.4,v 1.5 2002/11/26 22:28:20 nate Exp $
 .\" Copyright (c) 2002 Intel Corporation
 .\" All rights reserved.
 .\" Redistribution and use in source and binary forms of the Software, with or without 
@@ -88,7 +88,7 @@ Sets 1000Mbps operation.
 Only 
 full-duplex
 mode is supported at this speed.
-.It Cm media No 1000baseTX
+.It Cm media No 1000baseT
 Sets 1000Mbps operation.
 Only 
 full-duplex
diff --git a/share/man/man4/gem.4 b/share/man/man4/gem.4
index 79775c0ad27..9da367bbc65 100644
--- a/share/man/man4/gem.4
+++ b/share/man/man4/gem.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: gem.4,v 1.3 2002/09/26 22:09:53 miod Exp $
+.\"	$OpenBSD: gem.4,v 1.4 2002/11/26 22:28:20 nate Exp $
 .\"
 .\" Copyright (c) 2001 Miodrag Vallat.
 .\" All rights reserved.
@@ -80,10 +80,10 @@ The supported media types are:
 Attempt to autoselect the media type (default)
 .\" Check and correct the gigabit modes. Are both copper and fiber supported?
 .\" And in both duplex modes as well?
-.It media 1000baseTX  mediaopt full-duplex
-Use 1000baseSX on copper, full duplex
-.It media 1000baseTX Op mediaopt half-duplex
-Use 1000baseSX on copper, half duplex
+.It media 1000baseT  mediaopt full-duplex
+Use 1000baseT on copper, full duplex
+.It media 1000baseT Op mediaopt half-duplex
+Use 1000baseT on copper, half duplex
 .It media 1000baseSX  mediaopt full-duplex
 Use 1000baseSX on fiber, full duplex
 .It media 1000baseSX Op mediaopt half-duplex
diff --git a/share/man/man4/nge.4 b/share/man/man4/nge.4
index 1565c01264e..0df0b60fe6a 100644
--- a/share/man/man4/nge.4
+++ b/share/man/man4/nge.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: nge.4,v 1.12 2002/09/26 07:55:40 miod Exp $
+.\"	$OpenBSD: nge.4,v 1.13 2002/11/26 22:28:20 nate Exp $
 .\" Copyright (c) 2001 Wind River Systems
 .\" Copyright (c) 1997, 1998, 1999, 2000, 2001
 .\"	Bill Paul <wpaul@bsdi.com>. All rights reserved.
@@ -101,7 +101,7 @@ as the NIC cannot handle this case.
 The
 .Nm
 driver supports the following media types:
-.Bl -tag -width 1000baseTX
+.Bl -tag -width 1000baseSX
 .It Cm autoselect
 Enable autoselection of the media type and options.
 The user can manually override
@@ -128,8 +128,8 @@ option can also be used to select either
 or
 .Cm half-duplex
 modes.
-.It Cm 1000baseTX
-Set 1000baseTX operation over twisted pair.
+.It Cm 1000baseT
+Set 1000baseT operation over twisted pair.
 .Cm full-duplex
 and
 .Cm half-duplex
@@ -155,10 +155,10 @@ Force half duplex operation.
 .Pp
 The
 .Nm
-driver also supports one special link option for 1000baseTX cards:
+driver also supports one special link option for 1000baseT cards:
 .Bl -tag -width link0
 .It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
+With 1000baseT cards, establishing a link between two ports requires
 that one port be configured as a master and the other a slave.
 With autonegotiation,
 the master/slave settings will be chosen automatically.
diff --git a/share/man/man4/ti.4 b/share/man/man4/ti.4
index 3c888652733..34f20f3d722 100644
--- a/share/man/man4/ti.4
+++ b/share/man/man4/ti.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ti.4,v 1.18 2002/09/26 07:55:40 miod Exp $
+.\"	$OpenBSD: ti.4,v 1.19 2002/11/26 22:28:20 nate Exp $
 .\"
 .\" Copyright (c) 1997, 1998, 1999
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -136,7 +136,7 @@ Set 1000Mbps (Gigabit Ethernet) on fiber operation.
 Only
 .Ar full-duplex
 mode is supported at this speed.
-.It 1000baseTX
+.It 1000baseT
 Set 1000Mbps (Gigabit Ethernet) on copper operation.
 .El
 .Pp