- inadaquate -> inadequate (for dpt.4, too)

- .Sh HARDWARE -> .Sh DESCRIPTION (all man pages should have this section)
- Put the word "RAID" in the short description of dpt(4) for apropos.
- Remove hard sentence breaks.
- Trash trailing punctuation from last SEE ALSO entry.
- I dunno, what else can you fix in 30 seconds?

2 files changed, 17 insertions, 16 deletions

diff --git a/share/man/man4/dpt.4 b/share/man/man4/dpt.4
index 26e466d2f23..b714e7ced2c 100644
--- a/share/man/man4/dpt.4
+++ b/share/man/man4/dpt.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: dpt.4,v 1.3 2000/05/15 21:34:39 deraadt Exp $
+.\"	$OpenBSD: dpt.4,v 1.4 2000/07/04 22:27:18 aaron Exp $
 .\"	$NetBSD: dpt.4,v 1.7 2000/01/17 16:34:44 ad Exp $
 .\"
 .\" Copyright (c) 1999, 2000 Andy Doran <ad@NetBSD.org>
@@ -29,12 +29,12 @@
 .Sh NAME
 .Nm dpt
 .Nd
-.Tn DPT EATA SCSI adapter driver
+.Tn DPT EATA SCSI RAID adapter driver
 .Sh SYNOPSIS
 .Cd "dpt* at eisa? slot ?"
 .Cd "dpt* at pci? dev ? function ?"
 .Cd "scsibus* at dpt?"
-.Sh HARDWARE
+.Sh DESCRIPTION
 The
 .Nm
 driver provides support for the following
@@ -48,15 +48,15 @@ adapters:
 .It Tn DPT SmartRAID IV
 .El
 .Sh DIAGNOSTICS
-None of these messages should be encountered under normal circumstances. It
-should be noted that the list below is not complete.
+None of these messages should be encountered under normal circumstances.
+It should be noted that the list below is not complete.
 .Pp
 .Bl -tag -width indent
 .It dpt0: readcfg failed - see dpt(4)
 .br
-The EATA configuration data did not appear upon request. This may be caused
-by older firmware. Generally the solution is to power-cycle the affected
-machine.
+The EATA configuration data did not appear upon request.
+This may be caused by older firmware.
+Generally the solution is to power-cycle the affected machine.
 .br
 .It dpt0: spurious intr
 .br
@@ -72,7 +72,7 @@ A corrupt or incomplete status packet was recieved from the HBA.
 .Xr ch 4 ,
 .Xr scsi 4 .
 .Xr sd 4 ,
-.Xr st 4 ,
+.Xr st 4
 .Sh AUTHOR
 The
 .Nm
@@ -89,18 +89,19 @@ The
 driver first appeared in
 .Ox 2.5 .
 .Sh BUGS
-This manpage is inadaquate.
+This manpage is inadequate.
 .Pp
 EATA adapters other than listed may function correctly with the
 .Nm
 driver, however a definitive list is not avaiable.
 .Pp
-Older firmware may prove problematic. It is recommended that the latest
-available firmware be used. Contact DPT for a firmware update.
+Older firmware may prove problematic.
+It is recommended that the latest available firmware be used.
+Contact DPT for a firmware update.
 .Pp
 Older boards that do not suppport scatter-gather I/O or DMA are not supported.
 .Pp
 An ISA front-end is needed.
 .Pp
-ECC formatted disk and arrays (i.e. with a sector size of 528 bytes) do not
+ECC formatted disk and arrays (i.e., with a sector size of 528 bytes) do not
 work correctly with the PM2041 and certian firmware revisions of the PM3334.
diff --git a/share/man/man4/gdt.4 b/share/man/man4/gdt.4
index 8847f432fb3..3d9a60cadf6 100644
--- a/share/man/man4/gdt.4
+++ b/share/man/man4/gdt.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: gdt.4,v 1.5 2000/07/04 22:20:02 aaron Exp $
+.\"	$OpenBSD: gdt.4,v 1.6 2000/07/04 22:27:17 aaron Exp $
 .\"
 .\" Copyright (c) 2000 Niklas Hallqvist.  All rights reserved.
 .\"
@@ -13,7 +13,7 @@
 .Sh SYNOPSIS
 .Cd "gdt* at pci? dev ? function ?"
 .Cd "scsibus* at gdt?"
-.Sh HARDWARE
+.Sh DESCRIPTION
 The
 .Nm
 driver provides support for the following adapters:
@@ -64,7 +64,7 @@ has been tested as that was the adapter that was available to the author.
 .Sh SEE ALSO
 .Xr intro 4 ,
 .Xr scsi 4 ,
-.Xr sd 4 .
+.Xr sd 4
 .Sh AUTHOR
 The
 .Nm