update the example sensors output so it matches the current output

from the driver.

From Jason Dixon <jason at dixongroup dot net>

1 files changed, 10 insertions, 10 deletions

diff --git a/share/man/man4/lmenv.4 b/share/man/man4/lmenv.4
index e05eac16c31..69a49662e0c 100644
--- a/share/man/man4/lmenv.4
+++ b/share/man/man4/lmenv.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: lmenv.4,v 1.8 2006/09/07 10:42:25 jmc Exp $
+.\"	$OpenBSD: lmenv.4,v 1.9 2006/11/09 02:24:19 brad Exp $
 .\"
 .\" Copyright (c) 2005 Theo de Raadt <deraadt@openbsd.org>
 .\"
@@ -33,15 +33,15 @@ made available through the
 .Xr sysctl 8
 interface:
 .Bd -literal -offset indent
-hw.sensors.0=lmenv0, +2.5Vin, volts_dc, 2.62 V
-hw.sensors.1=lmenv0, Vccp1, volts_dc, 1.49 V
-hw.sensors.2=lmenv0, +Vcc, volts_dc, 3.28 V
-hw.sensors.3=lmenv0, +5Vin/Vcc, volts_dc, 5.03 V
-hw.sensors.4=lmenv0, +12Vin, volts_dc, 12.00 V
-hw.sensors.5=lmenv0, Vccp2, volts_dc, 1.20 V
-hw.sensors.6=lmenv0, Ext. Temp., temp, -128.00 degC / -198.40 degF
-hw.sensors.7=lmenv0, Int. Temp., temp, 29.00 degC / 84.20 degF
-hw.sensors.8=lmenv0, FAN1, fanrpm, 3220 RPM
+hw.sensors.0=lmenv0, +2.5Vin, 2.62 V DC
+hw.sensors.1=lmenv0, Vccp1, 1.49 V DC
+hw.sensors.2=lmenv0, +Vcc, 3.28 V DC
+hw.sensors.3=lmenv0, +5Vin/Vcc, 5.03 V DC
+hw.sensors.4=lmenv0, +12Vin, 12.00 V DC
+hw.sensors.5=lmenv0, Vccp2, 1.20 V DC
+hw.sensors.6=lmenv0, External Temp, -128.00 degC
+hw.sensors.7=lmenv0, Internal Temp, 29.00 degC
+hw.sensors.8=lmenv0, FAN1, 3220 RPM
 .Ed
 .Sh SEE ALSO
 .Xr iic 4 ,