diff options
| author | Jason McIntyre <jmc@cvs.openbsd.org> | 2011-09-03 22:59:09 +0000 |
|---|---|---|
| committer | Jason McIntyre <jmc@cvs.openbsd.org> | 2011-09-03 22:59:09 +0000 |
| commit | 0451f3d56ea81c5bb90e2ad8622098dcbf5878cd (patch) | |
| tree | 8104b89f5731d02def482049ba85b76933489f95 /share/man | |
| parent | 311bc18da7da07c9ba1304eecbf55db137005055 (diff) | |
make -column lists pretty again;
specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.
in some cases i have rewritten the lists as -tag, where -column made
little sense.
Diffstat (limited to 'share/man')
55 files changed, 952 insertions, 943 deletions
diff --git a/share/man/man4/acx.4 b/share/man/man4/acx.4 index 8608767e289..ce0ddbe8509 100644 --- a/share/man/man4/acx.4 +++ b/share/man/man4/acx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: acx.4,v 1.40 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: acx.4,v 1.41 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2006 Theo de Raadt. .\" Copyright (c) 2006 The DragonFly Project. All rights reserved. @@ -30,7 +30,7 @@ .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ACX 4 .Os .Sh NAME @@ -132,26 +132,26 @@ http://firmware.openbsd.org/firmware/acx-firmware-1.4.tgz The following cards are among those supported by the .Nm driver: -.Bl -column "Microcom Travelcard" "ACX111" "CardBus" "a/b/g" -offset 6n -.It Em "Card Chip Bus Standard" -.It D-Link DWL-520+ ACX100 PCI b -.It D-Link DWL-650+ ACX100 CardBus b -.It D-Link DWL-G520+ ACX111 PCI b/g -.It D-Link DWL-G630+ ACX111 CardBus b/g -.It D-Link DWL-G650+ ACX111 CardBus b/g -.It Digitus DN-7001G ACX111 CardBus b/g -.It Ergenic ERG WL-003 ACX100 CardBus b -.It Hamlet HNWP254 ACX111 CardBus b/g -.It Hawking HWP54G ACX111 PCI b/g -.It Linksys WPC54Gv2 ACX111 CardBus b/g -.It Microcom Travelcard ACX111 CardBus b/g -.It Netgear WG311v2 ACX111 PCI b/g -.It Sceptre SC254W+ ACX111 CardBus b/g -.It Tornado/ADT 211g ACX111 PCI b/g -.It USR USR5410 ACX111 CardBus b/g -.It USR USR5416 ACX111 PCI b/g -.It ZyXEL G-160 ACX111 CardBus b/g -.It ZyXEL G-360 EE ACX111 PCI b/g +.Bl -column "Microcom Travelcard" "ACX111" "CardBus" "Standard" -offset 6n +.It Em Card Ta Em Chip Ta Em Bus Ta Em Standard +.It "D-Link DWL-520+" Ta ACX100 Ta PCI Ta b +.It "D-Link DWL-650+" Ta ACX100 Ta CardBus Ta b +.It "D-Link DWL-G520+" Ta ACX111 Ta PCI Ta b/g +.It "D-Link DWL-G630+" Ta ACX111 Ta CardBus Ta b/g +.It "D-Link DWL-G650+" Ta ACX111 Ta CardBus Ta b/g +.It "Digitus DN-7001G" Ta ACX111 Ta CardBus Ta b/g +.It "Ergenic ERG WL-003" Ta ACX100 Ta CardBus Ta b +.It "Hamlet HNWP254" Ta ACX111 Ta CardBus Ta b/g +.It "Hawking HWP54G" Ta ACX111 Ta PCI Ta b/g +.It "Linksys WPC54Gv2" Ta ACX111 Ta CardBus Ta b/g +.It "Microcom Travelcard" Ta ACX111 Ta CardBus Ta b/g +.It "Netgear WG311v2" Ta ACX111 Ta PCI Ta b/g +.It "Sceptre SC254W+" Ta ACX111 Ta CardBus Ta b/g +.It "Tornado/ADT 211g" Ta ACX111 Ta PCI Ta b/g +.It "USR USR5410" Ta ACX111 Ta CardBus Ta b/g +.It "USR USR5416" Ta ACX111 Ta PCI Ta b/g +.It "ZyXEL G-160" Ta ACX111 Ta CardBus Ta b/g +.It "ZyXEL G-360 EE" Ta ACX111 Ta PCI Ta b/g .El .Sh EXAMPLES The following diff --git a/share/man/man4/adv.4 b/share/man/man4/adv.4 index 289c4c311d0..484747ff731 100644 --- a/share/man/man4/adv.4 +++ b/share/man/man4/adv.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: adv.4,v 1.25 2010/07/03 03:59:16 krw Exp $ +.\" $OpenBSD: adv.4,v 1.26 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 1998, Jason Downs. All rights reserved. .\" @@ -25,7 +25,7 @@ .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ADV 4 .Os .Sh NAME @@ -43,22 +43,22 @@ and .Nm adw drivers support most AdvanSys PCI SCSI host adapters, as shown in this table: -.Bl -column "ABP940UWxxxxx" "ASB3940U2W-00" -offset indent -.It Nm adv adw -.It ABP-920 ABP-940UW -.It ABP-930 (1) ABP-940UWD -.It ABP-930U ABP-970UW -.It ABP-930UA ASB-3940UW-00 -.It ABP-940 ASB-3940U2W-00 -.It ABP-940U ASB-3950U160 -.It ABP-940UA -.It ABP-950 -.It ABP-960 (2) -.It ABP-960U (2) -.It ABP-970 -.It ABP-970U -.It ABP-980 -.It ABP-980U +.Bl -column "ABP-960U (2)" "ASB3940U2W-00" -offset indent +.It Sy adv Ta Sy adw +.It "ABP-920" Ta ABP-940UW +.It "ABP-930 (1)" Ta ABP-940UWD +.It "ABP-930U" Ta ABP-970UW +.It "ABP-930UA" Ta ASB-3940UW-00 +.It "ABP-940" Ta ASB-3940U2W-00 +.It "ABP-940U" Ta ASB-3950U160 +.It "ABP-940UA" Ta "" +.It "ABP-950" Ta "" +.It "ABP-960 (2)" Ta "" +.It "ABP-960U (2)" Ta "" +.It "ABP-970" Ta "" +.It "ABP-970U" Ta "" +.It "ABP-980" Ta "" +.It "ABP-980U" Ta "" .El .Pp .Bl -enum -compact @@ -79,33 +79,32 @@ adw0:0:0: host adapter error 0x12, resetting bus. See adw(4). Some further information on the meaning of such errors can be obtained from the following table derived from the source code provided by ConnectCom. -.Bl -column "Error" "QHSTA_M_SCSI_BUS_RESET_UNSOL" -.It Em Error Define Name Comment -.Pp -.It 0x12 QHSTA_M_SXFR_XFR_OFLW SXFR_STATUS Transfer Overflow -.It 0x13 QHSTA_M_UNEXPECTED_BUS_FREE -.It 0x15 QHSTA_M_QUEUE_ABORTED -.It 0x16 QHSTA_M_SXFR_SDMA_ERR SXFR_STATUS SCSI DMA Error -.It 0x17 QHSTA_M_SXFR_SXFR_PERR SXFR_STATUS SCSI Bus Parity Error -.It 0x18 QHSTA_M_RDMA_PERR RISC PCI DMA parity error -.It 0x19 QHSTA_M_SXFR_OFF_UFLW SXFR_STATUS Offset Underflow -.It 0x20 QHSTA_M_SXFR_OFF_OFLW SXFR_STATUS Offset Overflow -.It 0x21 QHSTA_M_SXFR_WD_TMO SXFR_STATUS Watchdog Timeout -.It 0x22 QHSTA_M_SXFR_DESELECTED SXFR_STATUS Deselected -.It 0x24 QHSTA_M_SXFR_XFR_PH_ERR SXFR_STATUS Transfer Phase Error -.It 0x25 QHSTA_M_SXFR_UNKNOWN_ERROR SXFR_STATUS Unknown Error -.It 0x30 QHSTA_M_SCSI_BUS_RESET Request aborted from SBR -.It 0x31 QHSTA_M_SCSI_BUS_RESET_UNSOL Request aborted from unsolicited SBR -.It 0x32 QHSTA_M_BUS_DEVICE_RESET Request aborted from BDR -.It 0x35 QHSTA_M_DIRECTION_ERR Data Phase mismatch -.It 0x36 QHSTA_M_DIRECTION_ERR_HUNG Data Phase mismatch and bus hang -.It 0x41 QHSTA_M_WTM_TIMEOUT -.It 0x42 QHSTA_M_BAD_CMPL_STATUS_IN -.It 0x43 QHSTA_M_NO_AUTO_REQ_SENSE -.It 0x44 QHSTA_M_AUTO_REQ_SENSE_FAIL -.It 0x45 QHSTA_M_INVALID_DEVICE Bad target ID -.It 0x46 QHSTA_M_FROZEN_TIDQ TID Queue frozen -.It 0x47 QHSTA_M_SGBACKUP_ERROR Scatter-Gather backup error +.Bl -column "Error" "QHSTA_M_SCSI_BUS_RESET_UNSOL" "Comment" +.It Em "Error" Ta Em "Define Name" Ta Em "Comment" +.It 0x12 Ta QHSTA_M_SXFR_XFR_OFLW Ta "SXFR_STATUS Transfer Overflow" +.It 0x13 Ta QHSTA_M_UNEXPECTED_BUS_FREE Ta "" +.It 0x15 Ta QHSTA_M_QUEUE_ABORTED Ta "" +.It 0x16 Ta QHSTA_M_SXFR_SDMA_ERR Ta "SXFR_STATUS SCSI DMA Error" +.It 0x17 Ta QHSTA_M_SXFR_SXFR_PERR Ta "SXFR_STATUS SCSI Bus Parity Error" +.It 0x18 Ta QHSTA_M_RDMA_PERR Ta "RISC PCI DMA parity error" +.It 0x19 Ta QHSTA_M_SXFR_OFF_UFLW Ta "SXFR_STATUS Offset Underflow" +.It 0x20 Ta QHSTA_M_SXFR_OFF_OFLW Ta "SXFR_STATUS Offset Overflow" +.It 0x21 Ta QHSTA_M_SXFR_WD_TMO Ta "SXFR_STATUS Watchdog Timeout" +.It 0x22 Ta QHSTA_M_SXFR_DESELECTED Ta "SXFR_STATUS Deselected" +.It 0x24 Ta QHSTA_M_SXFR_XFR_PH_ERR Ta "SXFR_STATUS Transfer Phase Error" +.It 0x25 Ta QHSTA_M_SXFR_UNKNOWN_ERROR Ta "SXFR_STATUS Unknown Error" +.It 0x30 Ta QHSTA_M_SCSI_BUS_RESET Ta "Request aborted from SBR" +.It 0x31 Ta QHSTA_M_SCSI_BUS_RESET_UNSOL Ta "Request aborted from unsolicited SBR" +.It 0x32 Ta QHSTA_M_BUS_DEVICE_RESET Ta "Request aborted from BDR" +.It 0x35 Ta QHSTA_M_DIRECTION_ERR Ta "Data Phase mismatch" +.It 0x36 Ta QHSTA_M_DIRECTION_ERR_HUNG Ta "Data Phase mismatch and bus hang" +.It 0x41 Ta QHSTA_M_WTM_TIMEOUT Ta "" +.It 0x42 Ta QHSTA_M_BAD_CMPL_STATUS_IN Ta "" +.It 0x43 Ta QHSTA_M_NO_AUTO_REQ_SENSE Ta "" +.It 0x44 Ta QHSTA_M_AUTO_REQ_SENSE_FAIL Ta "" +.It 0x45 Ta QHSTA_M_INVALID_DEVICE Ta "Bad target ID" +.It 0x46 Ta QHSTA_M_FROZEN_TIDQ Ta "TID Queue frozen" +.It 0x47 Ta QHSTA_M_SGBACKUP_ERROR Ta "Scatter-Gather backup error" .El .Sh SEE ALSO .Xr cd 4 , diff --git a/share/man/man4/ahd.4 b/share/man/man4/ahd.4 index 328db7ae99b..28fd9b26315 100644 --- a/share/man/man4/ahd.4 +++ b/share/man/man4/ahd.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ahd.4,v 1.16 2011/08/30 12:25:09 jmc Exp $ +.\" $OpenBSD: ahd.4,v 1.17 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 1995, 1996, 1997, 1998, 2000 .\" Justin T. Gibbs. All rights reserved. @@ -29,7 +29,7 @@ .\" .\" $FreeBSD: /repoman/r/ncvs/src/share/man/man4/ahd.4,v 1.5 2004/07/04 14:17:41 simon Exp $ .\" -.Dd $Mdocdate: August 30 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt AHD 4 .Os .Sh NAME @@ -98,22 +98,22 @@ console when .Dv AHD_DEBUG is enabled. Logically OR the following bits together: -.Bl -column Value Function -offset indent -.It Em "Value Function" -.It 0x0001 Show miscellaneous information -.It 0x0002 Show sense data -.It 0x0004 Show Serial EEPROM contents -.It 0x0008 Show bus termination settings -.It 0x0010 Show host memory usage -.It 0x0020 Show SCSI protocol messages -.It 0x0040 Show mode pointer of the chip register window -.It 0x0080 Show selection timeouts -.It 0x0100 Show FIFO usage messages -.It 0x0200 Show Queue Full status -.It 0x0400 Show SCB queue status -.It 0x0800 Show inbound packet information -.It 0x1000 Show S/G list information -.It 0x2000 Enable extra diagnostic code in the firmware +.Bl -column "0x0001" "Function" -offset indent +.It Em Value Ta Em Function +.It 0x0001 Ta "Show miscellaneous information" +.It 0x0002 Ta "Show sense data" +.It 0x0004 Ta "Show Serial EEPROM contents" +.It 0x0008 Ta "Show bus termination settings" +.It 0x0010 Ta "Show host memory usage" +.It 0x0020 Ta "Show SCSI protocol messages" +.It 0x0040 Ta "Show mode pointer of the chip register window" +.It 0x0080 Ta "Show selection timeouts" +.It 0x0100 Ta "Show FIFO usage messages" +.It 0x0200 Ta "Show Queue Full status" +.It 0x0400 Ta "Show SCB queue status" +.It 0x0800 Ta "Show inbound packet information" +.It 0x1000 Ta "Show S/G list information" +.It 0x2000 Ta "Enable extra diagnostic code in the firmware" .El .Pp Per target configuration performed in the diff --git a/share/man/man4/aps.4 b/share/man/man4/aps.4 index f6aee1c3793..d6d04c4ccdb 100644 --- a/share/man/man4/aps.4 +++ b/share/man/man4/aps.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: aps.4,v 1.8 2007/12/23 22:09:19 jmc Exp $ +.\" $OpenBSD: aps.4,v 1.9 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2005 Jonathan Gray <jsg@openbsd.org> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: December 23 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt APS 4 .Os .Sh NAME @@ -30,7 +30,7 @@ driver provides support for several sensors found in some ThinkPad laptops. The sensors currently exposed via the .Xr sysctl 8 interface are: -.Bl -column "Sensor " "Units" "Typical" -offset indent +.Bl -column "Keyboard Active" "Unknown" "Typical Use" -offset indent .It Sy "Sensor" Ta Sy "Units" Ta Sy "Typical Use" .It Li "X_ACCEL" Ta "Unknown" Ta "X Acceleration" .It Li "Y_ACCEL" Ta "Unknown" Ta "Y Acceleration" diff --git a/share/man/man4/ath.4 b/share/man/man4/ath.4 index 1c3b368936f..7ebf98b9901 100644 --- a/share/man/man4/ath.4 +++ b/share/man/man4/ath.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ath.4,v 1.53 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: ath.4,v 1.54 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: ath.4,v 1.5 2004/07/03 16:58:18 mycroft Exp $ .\" .\" Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting @@ -42,7 +42,7 @@ .\" $FreeBSD: /repoman/r/ncvs/src/share/man/man4/ath.4,v 1.16 2004/02/18 08:30:08 maxim Exp $ .\" parts from $FreeBSD: /repoman/r/ncvs/src/share/man/man4/ath_hal.4,v 1.7 2004/01/07 20:49:51 blackend Exp $ .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ATH 4 .Os .Sh NAME @@ -151,49 +151,49 @@ Wireless cards in CardBus slots may be inserted and ejected on the fly. The following cards are among those supported by the .Nm driver: -.Bl -column "Samsung SWL-5200N" "AR5212" "CardBus" "a/b/g" -offset 6n -.It Em "Card Chip Bus Standard" -.It 3Com 3CRPAG175 AR5212 CardBus a/b/g -.\"It Aztech WL830PC AR5212 CardBus b/g -.It Cisco AIR-CB21AG AR5212 CardBus a/b/g -.It D-Link DWL-A650 AR5210 CardBus a -.It D-Link DWL-AB650 AR5211 CardBus a/b -.It D-Link DWL-A520 AR5210 PCI a -.\"It D-Link DWL-AG520 AR5212 PCI a/b/g -.\"It D-Link DWL-AG650 AR5212 CardBus a/b/g -.\"It D-Link DWL-G520 AR5212 PCI b/g -.\"It D-Link DWL-G650B AR5212 CardBus b/g -.\"It Elecom LD-WL54AG AR5212 CardBus a/b/g -.It Elecom LD-WL54 AR5211 CardBus a -.\"It Fujitsu E5454 AR5212 CardBus a/b/g -.\"It Fujitsu FMV-JW481 AR5212 CardBus a/b/g -.\"It Fujitsu E5454 AR5212 CardBus a/b/g -.\"It HP NC4000 AR5212 PCI a/b/g -.It IBM 11ABG WL LAN AR5212 Mini PCI a/b/g -.\"It I/O Data WN-AB AR5212 CardBus a/b -.\"It I/O Data WN-AG AR5212 CardBus a/b/g -.\"It I/O Data WN-A54 AR5212 CardBus a -.\"It Linksys WMP55AG AR5212 PCI a/b/g -.It Linksys WPC51AB AR5211 CardBus a/b -.\"It Linksys WPC55AG AR5212 CardBus a/b/g -.\"It NEC PA-WL/54AG AR5212 CardBus a/b/g -.\"It Netgear WAG311 AR5212 PCI a/b/g -.It Netgear WAB501 AR5211 CardBus a/b -.\"It Netgear WAG511 AR5212 CardBus a/b/g -.\"It Netgear WG311 rev1 AR5212 PCI b/g -.\"It Netgear WG511T AR5212 CardBus b/g -.\"It Orinoco 8480 AR5212 CardBus a/b/g -.\"It Orinoco 8470WD AR5212 CardBus a/b/g -.It Planet WL-3560 AR5211 CardBus a/b/g -.It Proxim Skyline 4030 AR5210 CardBus a -.It Proxim Skyline 4032 AR5210 PCI a -.\"It Samsung SWL-5200N AR5212 CardBus a/b/g -.It Senao NL-5354MP AR5212 Mini PCI a/b/g -.It SMC SMC2735W AR5210 CardBus a -.\"It Sony PCWA-C700 AR5212 CardBus a/b -.\"It Sony PCWA-C300S AR5212 CardBus b/g -.It Sony PCWA-C500 AR5210 CardBus a -.It Wistron CM9 AR5212 Mini PCI a/b/g +.Bl -column "Proxim Skyline 4030" "AR5212" "Mini PCI" "Standard" -offset 6n +.It Em Card Ta Em Chip Ta Em Bus Ta Em Standard +.It "3Com 3CRPAG175" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Aztech WL830PC" Ta AR5212 Ta CardBus Ta b/g +.It "Cisco AIR-CB21AG" Ta AR5212 Ta CardBus Ta a/b/g +.It "D-Link DWL-A650" Ta AR5210 Ta CardBus Ta a +.It "D-Link DWL-AB650" Ta AR5211 Ta CardBus Ta a/b +.It "D-Link DWL-A520" Ta AR5210 Ta PCI Ta a +.\"It "D-Link DWL-AG520" Ta AR5212 Ta PCI Ta a/b/g +.\"It "D-Link DWL-AG650" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "D-Link DWL-G520" Ta AR5212 Ta PCI Ta b/g +.\"It "D-Link DWL-G650B" Ta AR5212 Ta CardBus Ta b/g +.\"It "Elecom LD-WL54AG" Ta AR5212 Ta CardBus Ta a/b/g +.It "Elecom LD-WL54" Ta AR5211 Ta CardBus Ta a +.\"It "Fujitsu E5454" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Fujitsu FMV-JW481" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Fujitsu E5454" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "HP NC4000" Ta AR5212 Ta PCI Ta a/b/g +.It "IBM 11ABG WL LAN" Ta AR5212 Ta Mini PCI Ta a/b/g +.\"It "I/O Data WN-AB" Ta AR5212 Ta CardBus Ta a/b +.\"It "I/O Data WN-AG" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "I/O Data WN-A54" Ta AR5212 Ta CardBus Ta a +.\"It "Linksys WMP55AG" Ta AR5212 Ta PCI Ta a/b/g +.It "Linksys WPC51AB" Ta AR5211 Ta CardBus Ta a/b +.\"It "Linksys WPC55AG" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "NEC PA-WL/54AG" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Netgear WAG311" Ta AR5212 Ta PCI Ta a/b/g +.It "Netgear WAB501" Ta AR5211 Ta CardBus Ta a/b +.\"It "Netgear WAG511" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Netgear WG311 rev1" Ta AR5212 Ta PCI Ta b/g +.\"It "Netgear WG511T" Ta AR5212 Ta CardBus Ta b/g +.\"It "Orinoco 8480" Ta AR5212 Ta CardBus Ta a/b/g +.\"It "Orinoco 8470WD" Ta AR5212 Ta CardBus Ta a/b/g +.It "Planet WL-3560" Ta AR5211 Ta CardBus Ta a/b/g +.It "Proxim Skyline 4030" Ta AR5210 Ta CardBus Ta a +.It "Proxim Skyline 4032" Ta AR5210 Ta PCI Ta a +.\"It "Samsung SWL-5200N" Ta AR5212 Ta CardBus Ta a/b/g +.It "Senao NL-5354MP" Ta AR5212 Ta Mini PCI Ta a/b/g +.It "SMC SMC2735W" Ta AR5210 Ta CardBus Ta a +.\"It "Sony PCWA-C700" Ta AR5212 Ta CardBus Ta a/b +.\"It "Sony PCWA-C300S" Ta AR5212 Ta CardBus Ta b/g +.It "Sony PCWA-C500" Ta AR5210 Ta CardBus Ta a +.It "Wistron CM9" Ta AR5212 Ta Mini PCI Ta a/b/g .El .Sh EXAMPLES The following diff --git a/share/man/man4/athn.4 b/share/man/man4/athn.4 index 21d54210ade..c514b7d4557 100644 --- a/share/man/man4/athn.4 +++ b/share/man/man4/athn.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: athn.4,v 1.17 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: athn.4,v 1.18 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2009 Damien Bergamini <damien.bergamini@free.fr>. .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ATHN 4 .Os .Sh NAME @@ -94,30 +94,30 @@ They operate in the 2GHz spectrum and support 2 transmit paths and 2 receiver paths (2T2R). .Pp The following table summarizes the supported chips and their capabilities. -.Bl -column "AR9001-3NX2 (AR9160+AR9106)" "2GHz/5GHz" "3x3:3" "PCI/CardBus" -offset 4n -.It Em "Chipset Spectrum TxR:S Bus" -.It AR5008-2NG (AR5416+AR2122) 2GHz 2x2:2 PCI/CardBus -.It AR5008-3NG (AR5416+AR2133) 2GHz 3x3:2 PCI/CardBus -.It AR5008-2NX (AR5416+AR5122) 2GHz/5GHz 2x2:2 PCI/CardBus -.It AR5008-3NX (AR5416+AR5133) 2GHz/5GHz 3x3:2 PCI/CardBus -.It AR5008E-2NG (AR5418+AR2122) 2GHz 2x2:2 PCIe -.It AR5008E-3NG (AR5418+AR2133) 2GHz 3x3:2 PCIe -.It AR5008E-2NX (AR5418+AR5122) 2GHz/5GHz 2x2:2 PCIe -.It AR5008E-3NX (AR5418+AR5133) 2GHz/5GHz 3x3:2 PCIe -.It AR9001-2NG (AR9160+AR9103) 2GHz 2x2:2 PCI -.It AR9001-3NG (AR9160+AR9103) 2GHz 3x3:2 PCI -.It AR9001-3NX2 (AR9160+AR9106) 2GHz/5GHz 3x3:2 PCI -.It AR9220 2GHz/5GHz 2x2:2 PCI -.It AR9223 2GHz 2x2:2 PCI -.It AR9280 2GHz/5GHz 2x2:2 PCIe -.It AR9280+AR7010 2GHz/5GHz 2x2:2 USB 2.0 -.It AR9281 2GHz 1x2:2 PCIe -.It AR9285 2GHz 1x1:1 PCIe -.It AR9271 2GHz 1x1:1 USB 2.0 -.It AR2427 2GHz 1x1:1 PCIe -.It AR9227 2GHz 2x2:2 PCI -.It AR9287 2GHz 2x2:2 PCIe -.It AR9287+AR7010 2GHz 2x2:2 USB 2.0 +.Bl -column "AR9001-3NX2 (AR9160+AR9106)" "2GHz/5GHz" "3x3:3" "PCI/CardBus" -offset 6n +.It Em Chipset Ta Em Spectrum Ta Em TxR:S Ta Em Bus +.It "AR5008-2NG (AR5416+AR2122)" Ta 2GHz Ta 2x2:2 Ta PCI/CardBus +.It "AR5008-3NG (AR5416+AR2133)" Ta 2GHz Ta 3x3:2 Ta PCI/CardBus +.It "AR5008-2NX (AR5416+AR5122)" Ta 2GHz/5GHz Ta 2x2:2 Ta PCI/CardBus +.It "AR5008-3NX (AR5416+AR5133)" Ta 2GHz/5GHz Ta 3x3:2 Ta PCI/CardBus +.It "AR5008E-2NG (AR5418+AR2122)" Ta 2GHz Ta 2x2:2 Ta PCIe +.It "AR5008E-3NG (AR5418+AR2133)" Ta 2GHz Ta 3x3:2 Ta PCIe +.It "AR5008E-2NX (AR5418+AR5122)" Ta 2GHz/5GHz Ta 2x2:2 Ta PCIe +.It "AR5008E-3NX (AR5418+AR5133)" Ta 2GHz/5GHz Ta 3x3:2 Ta PCIe +.It "AR9001-2NG (AR9160+AR9103)" Ta 2GHz Ta 2x2:2 Ta PCI +.It "AR9001-3NG (AR9160+AR9103)" Ta 2GHz Ta 3x3:2 Ta PCI +.It "AR9001-3NX2 (AR9160+AR9106)" Ta 2GHz/5GHz Ta 3x3:2 Ta PCI +.It "AR9220" Ta 2GHz/5GHz Ta 2x2:2 Ta PCI +.It "AR9223" Ta 2GHz Ta 2x2:2 Ta PCI +.It "AR9280" Ta 2GHz/5GHz Ta 2x2:2 Ta PCIe +.It "AR9280+AR7010" Ta 2GHz/5GHz Ta 2x2:2 Ta USB 2.0 +.It "AR9281" Ta 2GHz Ta 1x2:2 Ta PCIe +.It "AR9285" Ta 2GHz Ta 1x1:1 Ta PCIe +.It "AR9271" Ta 2GHz Ta 1x1:1 Ta USB 2.0 +.It "AR2427" Ta 2GHz Ta 1x1:1 Ta PCIe +.It "AR9227" Ta 2GHz Ta 2x2:2 Ta PCI +.It "AR9287" Ta 2GHz Ta 2x2:2 Ta PCIe +.It "AR9287+AR7010" Ta 2GHz Ta 2x2:2 Ta USB 2.0 .El .Pp These are the modes the diff --git a/share/man/man4/bwi.4 b/share/man/man4/bwi.4 index 4d267bd875e..fc614f5d879 100644 --- a/share/man/man4/bwi.4 +++ b/share/man/man4/bwi.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: bwi.4,v 1.32 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: bwi.4,v 1.33 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt BWI 4 .Os .Sh NAME @@ -109,18 +109,18 @@ http://firmware.openbsd.org/firmware/bwi-firmware-1.4.tgz The following cards are among those supported by the .Nm driver: -.Bl -column "Apple Airport Extreme" "BCM4306" "CardBus" "a/b/g" -offset 6n -.It Em "Card Chip Bus Standard" -.It Apple Airport Extreme BCM4306 PCI b/g -.It Apple Airport Extreme BCM4318 PCI b/g -.It ASUS WL-138g BCM4318 PCI b/g -.It Buffalo WLI-CB-G54 BCM4306 CardBus b/g -.It Compaq R4035 onboard BCM4306 PCI b/g -.It HP nx6125 BCM4319 PCI b/g -.It Linksys WPC54G Ver 3 BCM4318 CardBus b/g -.It Linksys WPC54GS Ver 2 BCM4318 CardBus b/g -.It TRENDnet TEW-401PCplus BCM4306 CardBus b/g -.It US Robotics 5411 BCM4318 CardBus b/g +.Bl -column "TRENDnet TEW-401PCplus" "BCM4306" "CardBus" "Standard" -offset 6n +.It Em Card Ta Em Chip Ta Em Bus Ta Em Standard +.It "Apple Airport Extreme" Ta BCM4306 Ta PCI Ta b/g +.It "Apple Airport Extreme" Ta BCM4318 Ta PCI Ta b/g +.It "ASUS WL-138g" Ta BCM4318 Ta PCI Ta b/g +.It "Buffalo WLI-CB-G54" Ta BCM4306 Ta CardBus Ta b/g +.It "Compaq R4035 onboard" Ta BCM4306 Ta PCI Ta b/g +.It "HP nx6125" Ta BCM4319 Ta PCI Ta b/g +.It "Linksys WPC54G Ver 3" Ta BCM4318 Ta CardBus Ta b/g +.It "Linksys WPC54GS Ver 2" Ta BCM4318 Ta CardBus Ta b/g +.It "TRENDnet TEW-401PCplus" Ta BCM4306 Ta CardBus Ta b/g +.It "US Robotics 5411" Ta BCM4318 Ta CardBus Ta b/g .El .Sh EXAMPLES The following diff --git a/share/man/man4/icmp.4 b/share/man/man4/icmp.4 index 22330e24f0b..025e397b023 100644 --- a/share/man/man4/icmp.4 +++ b/share/man/man4/icmp.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: icmp.4,v 1.12 2008/06/21 07:15:33 jmc Exp $ +.\" $OpenBSD: icmp.4,v 1.13 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: icmp.4,v 1.3 1994/11/30 16:22:14 jtc Exp $ .\" .\" Copyright (c) 1986, 1991, 1993 @@ -30,7 +30,7 @@ .\" .\" @(#)icmp.4 8.1 (Berkeley) 6/5/93 .\" -.Dd $Mdocdate: June 21 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ICMP 4 .Os .Sh NAME @@ -90,8 +90,8 @@ present in the ICMP header. The abbreviations for the types and codes may be used in rules in .Xr pf.conf 5 . The following types are defined: -.Bl -column x xxxxxxxxxxxx -offset indent -.It Sy Num Ta Sy Abbrev. Ta Sy Description +.Bl -column "Num" "ipv6-where" -offset indent +.It Sy Num Ta Sy "Abbrev." Ta Sy Description .It 0 Ta echorep Ta "Echo reply" .It 3 Ta unreach Ta "Destination unreachable" .It 4 Ta squench Ta "Packet loss, slow down" @@ -120,9 +120,8 @@ The following types are defined: .El .Pp The following codes are defined: -.Bl -column x xxxxxxxxxxxx xxxxxxx -offset indent -.It Sy Num Ta Sy Abbrev. Ta Sy Type Ta -.Sy Description +.Bl -column "Num" "redir-tos-host" "paramprob" "Description" -offset indent +.It Sy Num Ta Sy "Abbrev." Ta Sy Type Ta Sy Description .It 0 Ta net-unr Ta unreach Ta "Network unreachable" .It 1 Ta host-unr Ta unreach Ta "Host unreachable" .It 2 Ta proto-unr Ta unreach Ta "Protocol unreachable" diff --git a/share/man/man4/icmp6.4 b/share/man/man4/icmp6.4 index 64ea42abd64..1a5b1050bfd 100644 --- a/share/man/man4/icmp6.4 +++ b/share/man/man4/icmp6.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: icmp6.4,v 1.24 2011/05/17 13:52:14 jmc Exp $ +.\" $OpenBSD: icmp6.4,v 1.25 2011/09/03 22:59:07 jmc Exp $ .\" $KAME: icmp6.4,v 1.6 2004/12/27 05:30:56 itojun Exp $ .\" .\" Copyright (c) 1986, 1991, 1993 @@ -27,7 +27,7 @@ .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. -.Dd $Mdocdate: May 17 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ICMP6 4 .Os .Sh NAME @@ -82,8 +82,8 @@ present in the ICMPv6 header. The abbreviations for the types and codes may be used in rules in .Xr pf.conf 5 . The following types are defined: -.Bl -column x xxxxxxxxxxxx -offset indent -.It Sy Num Ta Sy Abbrev. Ta Sy Description +.Bl -column "Num" "listendone" "Description" -offset indent +.It Sy Num Ta Sy "Abbrev." Ta Sy Description .It 1 Ta unreach Ta "Destination unreachable" .It 2 Ta toobig Ta "Packet too big" .It 3 Ta timex Ta "Time exceeded" @@ -113,9 +113,8 @@ The following types are defined: .El .Pp The following codes are defined: -.Bl -column x xxxxxxxxxxxx xxxxxxxx -offset indent -.It Sy Num Ta Sy Abbrev. Ta Sy Type Ta -.Sy Description +.Bl -column "Num" "redironlink" "paramprob" "Description" -offset indent +.It Sy Num Ta Sy "Abbrev." Ta Sy Type Ta Sy Description .It 0 Ta noroute-unr Ta unreach Ta "No route to destination" .It 1 Ta admin-unr Ta unreach Ta "Administratively prohibited" .It 2 Ta beyond-unr Ta unreach Ta "Beyond scope of source address" diff --git a/share/man/man4/ifmedia.4 b/share/man/man4/ifmedia.4 index 2807eee9700..dca9362c172 100644 --- a/share/man/man4/ifmedia.4 +++ b/share/man/man4/ifmedia.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ifmedia.4,v 1.19 2010/02/09 15:25:29 claudio Exp $ +.\" $OpenBSD: ifmedia.4,v 1.20 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: ifmedia.4,v 1.14 2001/06/30 17:57:56 bjh21 Exp $ .\" .\" Copyright (c) 1998 The NetBSD Foundation, Inc. @@ -29,7 +29,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: February 9 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt IFMEDIA 4 .Os .Sh NAME @@ -314,26 +314,23 @@ specified by regional authorities. Recognized regulatory authorities include the FCC (United States), ETSI (Europe), France, and Japan. Frequencies in the table are specified in MHz. -.Pp -.Bd -ragged -offset indent -.Bl -column "Channel " "FCC" "ETSI" "France" "Japan" -.It Em "Channel FCC ETSI France Japan" -.It 1 2412 2412 - 2412 -.It 2 2417 2417 - 2417 -.It 3 2422 2422 - 2422 -.It 4 2427 2427 - 2427 -.It 5 2432 2432 - 2432 -.It 6 2437 2437 - 2437 -.It 7 2442 2442 - 2442 -.It 8 2447 2447 - 2447 -.It 9 2452 2452 - 2452 -.It 10 2457 2457 2457 2457 -.It 11 2462 2462 2462 2462 -.It 12 - 2467 2467 2467 -.It 13 - 2472 2472 2472 -.It 14 - - - 2484 +.Bl -column "Channel " "2412" "ETSI" "France" "Japan" -offset indent +.It Em Channel Ta Em FCC Ta Em ETSI Ta Em France Ta Em Japan +.It 1 Ta 2412 Ta 2412 Ta - Ta 2412 +.It 2 Ta 2417 Ta 2417 Ta - Ta 2417 +.It 3 Ta 2422 Ta 2422 Ta - Ta 2422 +.It 4 Ta 2427 Ta 2427 Ta - Ta 2427 +.It 5 Ta 2432 Ta 2432 Ta - Ta 2432 +.It 6 Ta 2437 Ta 2437 Ta - Ta 2437 +.It 7 Ta 2442 Ta 2442 Ta - Ta 2442 +.It 8 Ta 2447 Ta 2447 Ta - Ta 2447 +.It 9 Ta 2452 Ta 2452 Ta - Ta 2452 +.It 10 Ta 2457 Ta 2457 Ta 2457 Ta 2457 +.It 11 Ta 2462 Ta 2462 Ta 2462 Ta 2462 +.It 12 Ta - Ta 2467 Ta 2467 Ta 2467 +.It 13 Ta - Ta 2472 Ta 2472 Ta 2472 +.It 14 Ta - Ta - Ta - Ta 2484 .El -.Ed .Pp Note that the channels do overlap; the bandwidth required for each channel is about 20MHz. diff --git a/share/man/man4/itherm.4 b/share/man/man4/itherm.4 index 362fd5f370e..39284f79805 100644 --- a/share/man/man4/itherm.4 +++ b/share/man/man4/itherm.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: itherm.4,v 1.2 2010/07/03 07:09:26 jmc Exp $ +.\" $OpenBSD: itherm.4,v 1.3 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2010 Mike Larkin <mlarkin@openbsd.org> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ITHERM 4 .Os .Sh NAME @@ -31,7 +31,7 @@ chipsets. The sensors currently exposed via the .Xr sysctl 8 interface are: -.Bl -column "Sensor " "Units" "Typical" -offset indent +.Bl -column "CPU power cons." "Units" "Typical Use" -offset indent .It Sy "Sensor" Ta Sy "Units" Ta Sy "Typical Use" .It Li "Thermometer" Ta "degC" Ta "Temperature" .It Li "Core 1" Ta "degC" Ta "Temperature" diff --git a/share/man/man4/malo.4 b/share/man/man4/malo.4 index 75a9f0e7442..672d538f550 100644 --- a/share/man/man4/malo.4 +++ b/share/man/man4/malo.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: malo.4,v 1.37 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: malo.4,v 1.38 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2006 Theo de Raadt. .\" @@ -26,7 +26,7 @@ .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt MALO 4 .Os .Sh NAME @@ -123,15 +123,15 @@ http://firmware.openbsd.org/firmware/malo-firmware-1.4.tgz The following cards are among those supported by the .Nm driver: -.Bl -column "Microcom Travelcard" "MALO111" "CardBus" "a/b/g" -offset 6n -.It Em "Card Chip Bus Standard" -.It Ambicom WL54CF 88W8385 PCMCIA b/g -.It I-O DATA WN-G54/CF 88W8385 PCMCIA b/g -.It Netgear WG511v2 88W8310 CardBus b/g -.It Netgear WG311v3 88W8335 PCI b/g -.It SparkLAN WCFM-100 88W8385 PCMCIA b/g -.It Tenda TWL541C 88W8310 CardBus b/g -.It Tenda TWL542P 88W8335 PCI b/g +.Bl -column "I-O DATA WN-G54/CF" "88W8385" "CardBus" "Standard" -offset 6n +.It Em Card Ta Em Chip Ta Em Bus Ta Em Standard +.It "Ambicom WL54CF" Ta 88W8385 Ta PCMCIA Ta b/g +.It "I-O DATA WN-G54/CF" Ta 88W8385 Ta PCMCIA Ta b/g +.It "Netgear WG511v2" Ta 88W8310 Ta CardBus Ta b/g +.It "Netgear WG311v3" Ta 88W8335 Ta PCI Ta b/g +.It "SparkLAN WCFM-100" Ta 88W8385 Ta PCMCIA Ta b/g +.It "Tenda TWL541C" Ta 88W8310 Ta CardBus Ta b/g +.It "Tenda TWL542P" Ta 88W8335 Ta PCI Ta b/g .El .Sh EXAMPLES The following diff --git a/share/man/man4/man4.alpha/tga.4 b/share/man/man4/man4.alpha/tga.4 index dab5fe723fb..733057a560e 100644 --- a/share/man/man4/man4.alpha/tga.4 +++ b/share/man/man4/man4.alpha/tga.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tga.4,v 1.11 2007/12/23 22:16:39 jmc Exp $ +.\" $OpenBSD: tga.4,v 1.12 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2001 Nathan L. Binkert <binkertn@umich.edu> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: December 23 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt TGA 4 alpha .Os .Sh NAME @@ -34,10 +34,9 @@ On some TGA models, there are four DIP switches. On other models, there is a rotary switch with positions 0-F. There are also some that use jumpers. .Ss TGA Switch Settings -.Bl -column "Setting" "Pixel Freq" "Resolution" "Refresh Rate" -offset indent -.It Li Switch Ta Pixel Ta Monitor Ta Refresh -.It Em "Setting Freq (MHz) Resolution Rate (MHz)" -.It " " +.Bl -column "Setting" "Freq (MHz)" "Resolution" "Rate (MHz)" -offset indent +.It Sy Switch Ta Sy Pixel Ta Sy Monitor Ta Sy Refresh +.It Sy "Setting" Ta Sy "Freq (MHz)" Ta Sy "Resolution" Ta Sy "Rate (MHz)" .It Li 0 Ta 130 Ta 1280x1024 Ta 72 .It Li 1 Ta 119 Ta 1280x1024 Ta 66 .It Li 2 Ta 108 Ta 1280x1024 Ta 60 diff --git a/share/man/man4/man4.hp300/hyper.4 b/share/man/man4/man4.hp300/hyper.4 index d353960b563..42cd0817285 100644 --- a/share/man/man4/man4.hp300/hyper.4 +++ b/share/man/man4/man4.hp300/hyper.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: hyper.4,v 1.10 2008/03/26 08:11:08 jmc Exp $ +.\" $OpenBSD: hyper.4,v 1.11 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003, Miodrag Vallat. .\" All rights reserved. @@ -24,7 +24,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 26 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt HYPER 4 hp300 .Os .Sh NAME @@ -53,7 +53,6 @@ Numbering the jumper pins from 1 to 3 from left to right, the following combinations are available: .Bl -column "JP02" "JP01" -offset indent .It Sy "JP02" Ta Sy "JP01" Ta Sy "Select code" -.It " " .It Li "1-2" Ta "1-2" Ta 135 .It Li "1-2" Ta "2-3" Ta 134 .It Li "2-3" Ta "1-2" Ta "133 (factory settings)" diff --git a/share/man/man4/man4.hppa/intro.4 b/share/man/man4/man4.hppa/intro.4 index bec185ad4e2..d61a8022fba 100644 --- a/share/man/man4/man4.hppa/intro.4 +++ b/share/man/man4/man4.hppa/intro.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: intro.4,v 1.19 2007/10/09 15:01:40 jmc Exp $ +.\" $OpenBSD: intro.4,v 1.20 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2002,2003 Paul Weissmann .\" All rights reserved. @@ -24,7 +24,7 @@ .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" -.Dd $Mdocdate: October 9 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt INTRO 4 hppa .Os .Sh NAME @@ -86,7 +86,7 @@ A list of models targetted for support is listed below, including basic system characteristics. .Bl -column "J210XC" "200" "7300LC" "64/64(+1MB)" "Expansion" -offset left -.It "Model" Ta "MHz" Ta "CPU" Ta "Caches, KB" Ta "Expansion" +.It Sy "Model" Ta Sy "MHz" Ta Sy "CPU" Ta Sy "Caches, KB" Ta Sy "Expansion" .It "705" Ta "35" Ta "7000" Ta "32/64" Ta "N/A" .It "710" Ta "50" Ta "7000" Ta "32/64" Ta "N/A" .It "720" Ta "50" Ta "7000" Ta "128/256" Ta "EISA, GSC" diff --git a/share/man/man4/man4.hppa/io.4 b/share/man/man4/man4.hppa/io.4 index 637821d196e..dc91f2f2294 100644 --- a/share/man/man4/man4.hppa/io.4 +++ b/share/man/man4/man4.hppa/io.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: io.4,v 1.14 2007/05/31 19:19:54 jmc Exp $ +.\" $OpenBSD: io.4,v 1.15 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003,2004 Paul Weissmann .\" All rights reserved. @@ -24,7 +24,7 @@ .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" -.Dd $Mdocdate: May 31 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt IO 4 hppa .Os .Sh NAME @@ -36,56 +36,56 @@ The following table lists the I/O subsystems and connected devices found in the supported .Tn HP 9000/700 machines. -.Bl -column " 715x100" " MBA" " SExxFWD" " CAxxFDDI" " Video" " xxxxxxx" -offset left -.It "Model" " MBA" " SCSI" " Network" " Video" " Misc" -.It "705" " A" " SE" " DX" " Timber" -.It "710" " A" " SE" " DX" " Timber" -.It "712" " LW" " SE" " CA, TR" " Artist" -.It "715/33" " A" " SE" " DX" " Stinger" -.It "715/50" " A" " SE" " DX" " Stinger" -.It "715/64" " LW" " SE" " CA" " Artist" -.It "715/75" " A" " SE" " DX" " Stinger" -.It "715/80" " LW" " SE" " CA" " Artist" -.It "715/100" " LW" " SE" " CA" " Artist" -.It "720" " A" " SE" " DX" " [SGC]" -.It "725/50" " A" " SE" " DX" " Stinger" -.It "725/75" " A" " SE" " DX" " Stinger" -.It "725/64" " LW" " SE" " CA" " Artist" -.It "725/100" " LW" " SE" " CA" " Artist" -.It "730" " A" " SE" " DX" " [SGC]" -.It "735" " A" " SE, FWD" " DX, FDDI" " [SGC]" -.It "742i" " A" " SE" " CA" " Stinger" " VME" -.It "743i" " DLW" " SE" " DX" " Artist" " VME" -.It "744" " DLW" " SE" " DX" " EG" " VME" -.It "745" " DLW" " SE" " DX" " EG" " VME" -.It "745i" " A" " SE" " DX" " Stinger" -.It "747i" " A" " SE" " DX" " Stinger" -.It "748" " DLW" " SE" " DX" " EG" " VME" -.It "748i" " DLW" " SE" " DX" " Artist" " VME" -.It "750" " A" " SE" " DX" " [SGC]" -.It "755" " A" " SE, FWD" " DX, FDDI" " [SGC]" -.It "A180/C" " DL" " SE" " DC" " [GSC/PCI]" -.It "B132L" " DLW" " SE, FWD" " CA" " EG" -.It "B160L" " DLW" " SE, UW" " DC" " EG" -.It "B180L" " DLW" " SE, UW" " DC" " EG" -.It "C100" " LUW" " SE, FWD" " CA" " [GSC]" -.It "C110" " LUW" " SE, FWD" " CA" " [GSC]" -.It "C132L" " DLUW" " SE, UW" " DC" " EG" -.It "C160L" " DLUW" " SE, UW" " DC" " EG" -.It "C160" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "C180L" " DLUW" " SE, UW" " DC" " EG" -.It "C180" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "C200" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "C230" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "C240" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "C360" " DLU" " SE, UW" " DC" " [GSC/PCI]" -.It "J200" " LUW" " SE, FWD" " CA" " [GSC]" -.It "J210/XC" " LUW" " SE, FWD" " CA" " [GSC]" -.It "J280" " DLUW" " SE, UW" " DC" " [GSC/PCI]" -.It "J282" " DLUW" " SE, UW" " DC" " [GSC/PCI]" -.It "J2240" " DLUW" " SE, UW" " DC" " [GSC/PCI]" -.It "RDI" " DL" " SE" " CA" " EG" " CardBus" -.It "SAIC" " LW" " SE" " CA" " Artist" " PCMCIA" +.Bl -column "715/100" "DLUW" "SE, FWD" "DX, FDDI" "[GSC/PCI]" "Misc" -offset 6n +.It Sy Model Ta Sy MBA Ta Sy SCSI Ta Sy Network Ta Sy Video Ta Sy Misc +.It "705" Ta "A" Ta "SE" Ta "DX" Ta "Timber" Ta "" +.It "710" Ta "A" Ta "SE" Ta "DX" Ta "Timber" Ta "" +.It "712" Ta "LW" Ta "SE" Ta "CA, TR" Ta "Artist" Ta "" +.It "715/33" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "715/50" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "715/64" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "" +.It "715/75" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "715/80" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "" +.It "715/100" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "" +.It "720" Ta "A" Ta "SE" Ta "DX" Ta "[SGC]" Ta "" +.It "725/50" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "725/75" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "725/64" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "" +.It "725/100" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "" +.It "730" Ta "A" Ta "SE" Ta "DX" Ta "[SGC]" Ta "" +.It "735" Ta "A" Ta "SE, FWD" Ta "DX, FDDI" Ta "[SGC]" Ta "" +.It "742i" Ta "A" Ta "SE" Ta "CA" Ta "Stinger" Ta "VME" +.It "743i" Ta "DLW" Ta "SE" Ta "DX" Ta "Artist" Ta "VME" +.It "744" Ta "DLW" Ta "SE" Ta "DX" Ta "EG" Ta "VME" +.It "745" Ta "DLW" Ta "SE" Ta "DX" Ta "EG" Ta "VME" +.It "745i" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "747i" Ta "A" Ta "SE" Ta "DX" Ta "Stinger" Ta "" +.It "748" Ta "DLW" Ta "SE" Ta "DX" Ta "EG" Ta "VME" +.It "748i" Ta "DLW" Ta "SE" Ta "DX" Ta "Artist" Ta "VME" +.It "750" Ta "A" Ta "SE" Ta "DX" Ta "[SGC]" Ta "" +.It "755" Ta "A" Ta "SE, FWD" Ta "DX, FDDI" Ta "[SGC]" Ta "" +.It "A180/C" Ta "DL" Ta "SE" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "B132L" Ta "DLW" Ta "SE, FWD" Ta "CA" Ta "EG" Ta "" +.It "B160L" Ta "DLW" Ta "SE, UW" Ta "DC" Ta "EG" Ta "" +.It "B180L" Ta "DLW" Ta "SE, UW" Ta "DC" Ta "EG" Ta "" +.It "C100" Ta "LUW" Ta "SE, FWD" Ta "CA" Ta "[GSC]" Ta "" +.It "C110" Ta "LUW" Ta "SE, FWD" Ta "CA" Ta "[GSC]" Ta "" +.It "C132L" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "EG" Ta "" +.It "C160L" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "EG" Ta "" +.It "C160" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "C180L" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "EG" Ta "" +.It "C180" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "C200" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "C230" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "C240" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "C360" Ta "DLU" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "J200" Ta "LUW" Ta "SE, FWD" Ta "CA" Ta "[GSC]" Ta "" +.It "J210/XC" Ta "LUW" Ta "SE, FWD" Ta "CA" Ta "[GSC]" Ta "" +.It "J280" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "J282" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "J2240" Ta "DLUW" Ta "SE, UW" Ta "DC" Ta "[GSC/PCI]" Ta "" +.It "RDI" Ta "DL" Ta "SE" Ta "CA" Ta "EG" Ta "CardBus" +.It "SAIC" Ta "LW" Ta "SE" Ta "CA" Ta "Artist" Ta "PCMCIA" .El .Pp The MBA column denotes the bus adapters in use: diff --git a/share/man/man4/man4.hppa/pdc.4 b/share/man/man4/man4.hppa/pdc.4 index 599a87ccea5..86367ac0f4f 100644 --- a/share/man/man4/man4.hppa/pdc.4 +++ b/share/man/man4/man4.hppa/pdc.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: pdc.4,v 1.7 2010/09/19 12:49:37 jmc Exp $ +.\" $OpenBSD: pdc.4,v 1.8 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2004 Michael Shalayeff .\" All rights reserved. @@ -24,7 +24,7 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: September 19 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt PDC 4 hppa .Os .Sh NAME @@ -119,7 +119,7 @@ pointed to by the .Ar ptr argument. The format of the data stores is as follows: -.Bl -column "0x00" "contents" -offset left +.Bl -column "0x00" "contents" -offset indent .It Sy "addr" Ta Sy "contents" .It "0x00" Ta "I-cache size in bytes" .It "0x04" Ta "I-cache configuration" @@ -154,16 +154,16 @@ The format of the data stores is as follows: .El .Pp The cache configuration word is formatted as follows: -.Bl -column "bit" "len" "contents" -offset left -.It Sy "bit" "len" "contents" -.It "0" "12" "reserved" -.It "13" "3" "set 1 if coherent operation supported" -.It "16" "2" "flush mode: 0 -- fdc & fic; 1 -- fdc; 2 -- fic; 3 -- either" -.It "18" "1" "write-thru D-cache if set" -.It "19" "2" "reserved" -.It "21" "3" "cache line size" -.It "24" "4" "associativity" -.It "28" "4" "virtual address alias boundary" +.Bl -column "bit" "len" "contents" -offset indent +.It Sy "bit" Ta Sy "len" Ta Sy "contents" +.It "0" Ta "12" Ta "reserved" +.It "13" Ta "3" Ta "set 1 if coherent operation supported" +.It "16" Ta "2" Ta "flush mode: 0 -- fdc & fic; 1 -- fdc; 2 -- fic; 3 -- either" +.It "18" Ta "1" Ta "write-thru D-cache if set" +.It "19" Ta "2" Ta "reserved" +.It "21" Ta "3" Ta "cache line size" +.It "24" Ta "4" Ta "associativity" +.It "28" Ta "4" Ta "virtual address alias boundary" .El .Pp .It Fn pdc "PDC_CACHE" "PDC_CACHE_SETCS" "ptr" "i_cst" "d_cst" "it_cst" "dt_cst" @@ -392,7 +392,7 @@ argument of no more than bytes. .Pp The format of the NVM is as follows: -.Bl -column "0x0000" "size" "contents" -offset left +.Bl -column "0x0000" "size" "contents" -offset indent .It Sy "offset" Ta Sy "size" Ta Sy "contents" .It "0x00" Ta "0x24" Ta "HV dependent" .It "0x24" Ta "0x20" Ta "bootpath" @@ -552,34 +552,34 @@ argument of no more than bytes. .Pp The format of the stable storage is as follows: -.Bl -column "offset" "0x00" "contents" -offset left -.It Sy "offset" "size" "contents" -.It "0x0000" "0x20" "primary bootpath" -.It "0x0020" "0x20" "reserved" -.It "0x0040" "0x02" "OS ID" -.It "0x0042" "0x16" "OS dependent" -.It "0x0058" "0x02" "diagnostic" -.It "0x005a" "0x03" "reserved" -.It "0x005d" "0x02" "OS dependent" -.It "0x005f" "0x01" "fast size" -.It "0x0060" "0x20" "console path" -.It "0x0080" "0x20" "alternative boot path" -.It "0x00a0" "0x20" "keyboard path" -.It "0x00c0" "0x20" "reserved" -.It "0x00e0" "size" "OS dependent" +.Bl -column "offset" "0x00" "contents" -offset indent +.It Sy "offset" Ta Sy "size" Ta Sy "contents" +.It "0x0000" Ta "0x20" Ta "primary bootpath" +.It "0x0020" Ta "0x20" Ta "reserved" +.It "0x0040" Ta "0x02" Ta "OS ID" +.It "0x0042" Ta "0x16" Ta "OS dependent" +.It "0x0058" Ta "0x02" Ta "diagnostic" +.It "0x005a" Ta "0x03" Ta "reserved" +.It "0x005d" Ta "0x02" Ta "OS dependent" +.It "0x005f" Ta "0x01" Ta "fast size" +.It "0x0060" Ta "0x20" Ta "console path" +.It "0x0080" Ta "0x20" Ta "alternative boot path" +.It "0x00a0" Ta "0x20" Ta "keyboard path" +.It "0x00c0" Ta "0x20" Ta "reserved" +.It "0x00e0" Ta "size" Ta "OS dependent" .El .Pp The .Dq OS ID field may have the following values: -.Bl -column "value" "OS" -offset left -.It Sy "value" "OS" -.It "0x000" "No OS-dependent info" -.It "0x001" "HP-UX" -.It "0x002" "MPE-iX" -.It "0x003" "OSF" -.It "0x004" "HP-RT" -.It "0x005" "Novell Netware" +.Bl -column "value" "OS" -offset indent +.It Sy "value" Ta Sy "OS" +.It "0x000" Ta "No OS-dependent info" +.It "0x001" Ta "HP-UX" +.It "0x002" Ta "MPE-iX" +.It "0x003" Ta "OSF" +.It "0x004" Ta "HP-RT" +.It "0x005" Ta "Novell Netware" .El .Pp The diff --git a/share/man/man4/man4.mvme68k/le.4 b/share/man/man4/man4.mvme68k/le.4 index 20fa01973f0..73597e2dd68 100644 --- a/share/man/man4/man4.mvme68k/le.4 +++ b/share/man/man4/man4.mvme68k/le.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: le.4,v 1.17 2008/03/27 20:19:33 jmc Exp $ +.\" $OpenBSD: le.4,v 1.18 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 1992, 1993 .\" The Regents of the University of California. All rights reserved. .\" @@ -33,7 +33,7 @@ .\" from: Header: le.4,v 1.2 92/10/13 05:31:33 leres Exp .\" from: @(#)le.4 8.1 (Berkeley) 6/9/93 .\" -.Dd $Mdocdate: March 27 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt LE 4 mvme68k .Os .Sh NAME @@ -82,9 +82,8 @@ VME connectors, and closer to the AM7990DC chip at the bottom edge. .Pp The only supported configurations are: -.Bl -column "xxxxxxxx" "xxxxxxxx" "xxxxxxxx" "0xffffffff" -.It Li SW1 Ta SW2 Ta SW3 Ta Address -.It " " +.Bl -column "xxxxxxxx" "xxxxxxxx" "xxxxxxxx" "0xffffffff" -offset indent +.It Sy SW1 Ta Sy SW2 Ta Sy SW3 Ta Sy Address .It Li "UUU_UU_U" Ta "U__U____" Ta "______U_" Ta "0xffff1200" .It Li "UUU_U_UU" Ta "U__U_U__" Ta "______U_" Ta "0xffff1400" .It Li "UUU_U__U" Ta "U__UU___" Ta "______U_" Ta "0xffff1600" diff --git a/share/man/man4/man4.mvme68k/vs.4 b/share/man/man4/man4.mvme68k/vs.4 index cb2aa849113..fb32634fa25 100644 --- a/share/man/man4/man4.mvme68k/vs.4 +++ b/share/man/man4/man4.mvme68k/vs.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vs.4,v 1.3 2010/07/03 09:20:06 krw Exp $ +.\" $OpenBSD: vs.4,v 1.4 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003 Paul Weissmann .\" All rights reserved. @@ -25,7 +25,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VS 4 mvme68k .Os .Sh NAME @@ -61,8 +61,8 @@ known with certitude. .Ss MVME328 channel configuration The following table lists the channel configuration for Motorola MVME328 boards. -.Bl -column "Model Number" "Differential" "Channel 1" -offset indent -.It Li Model Number Ta Channel 0 Ta Channel 1 +.Bl -column "Model Number" "Single-ended" "Single-ended" -offset indent +.It Sy "Model Number" Ta Sy "Channel 0" Ta Sy "Channel 1" .It Li MVME328-1 Ta Single-ended Ta Missing .It Li MVME328-2 Ta Single-ended Ta Single-ended .It Li MVME328-3 Ta Differential Ta Missing @@ -71,8 +71,8 @@ boards. .Ss MVME328S channel configuration The following table lists the channel configuration for Motorola MVME328S boards. -.Bl -column "Model Number" "Differential" "Channel 1" -offset indent -.It Li Model Number Ta Channel 0 Ta Channel 1 +.Bl -column "Model Number" "Single-ended" "Single-ended" -offset indent +.It Sy "Model Number" Ta Sy "Channel 0" Ta Sy "Channel 1" .It Li MVME328S-1 Ta Single-ended Ta Missing .It Li MVME328S-2 Ta Single-ended Ta Single-ended .\" No -3 model @@ -100,8 +100,8 @@ dual jumper, located immediately to the left of the block. .Pp The only supported configurations are: -.Bl -column "xxxxxxxxx" "0xffffffff" -offset indent -.It Li JB1 Ta Address Ta Configuration +.Bl -column "xxxxxxxxx" "0xffffffff" "Configuration" -offset indent +.It Sy JB1 Ta Sy Address Ta Sy Configuration .It Li "___X_XX__" Ta "0xffff9000" Ta "1st board" .It Li "_____XX__" Ta "0xffff9800" Ta "2nd board" .It Li "____XX_X_" Ta "0xffff4800" Ta "3rd board" @@ -118,8 +118,8 @@ the bottom row of eleven jumpers should have the leftmost jumper set and the ten rightmost jumpers open. .Pp The only supported configurations for the top row are: -.Bl -column "xxxxxxxxxxx" "0xffffffff" -offset indent -.It Li Jumpers Ta Address Ta Configuration +.Bl -column "xxxxxxxxxxx" "0xffffffff" "Configuration" -offset indent +.It Sy Jumpers Ta Sy Address Ta Sy Configuration .It Li "___X_XX____" Ta "0xffff9000" Ta "1st board" .It Li "_____XX____" Ta "0xffff9800" Ta "2nd board" .It Li "____XX_X___" Ta "0xffff4800" Ta "3rd board" diff --git a/share/man/man4/man4.mvme68k/vsbic.4 b/share/man/man4/man4.mvme68k/vsbic.4 index 46bb3372807..8df237fc82b 100644 --- a/share/man/man4/man4.mvme68k/vsbic.4 +++ b/share/man/man4/man4.mvme68k/vsbic.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vsbic.4,v 1.5 2010/07/03 09:20:06 krw Exp $ +.\" $OpenBSD: vsbic.4,v 1.6 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2009 Miodrag Vallat. .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VSBIC 4 mvme68k .Os .Sh NAME @@ -47,7 +47,7 @@ on the board, near its center. With the card oriented with its faceplate at the bottom and the VME connectors at the top, the supported configurations are: .Bl -column "xxxxxxxx" "0xffffffff" -offset indent -.It Li J5 Ta Address Ta Configuration +.It Sy J5 Ta Sy Address Ta Sy Configuration .It Li "_X_XX__X" Ta "0xffffa600" Ta "1st board" .It Li "_X_XX___" Ta "0xffffa700" Ta "2nd board" .El diff --git a/share/man/man4/man4.mvme88k/le.4 b/share/man/man4/man4.mvme88k/le.4 index c379251d635..3bc8b7b3386 100644 --- a/share/man/man4/man4.mvme88k/le.4 +++ b/share/man/man4/man4.mvme88k/le.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: le.4,v 1.9 2008/11/12 22:50:07 miod Exp $ +.\" $OpenBSD: le.4,v 1.10 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003 Paul Weissmann .\" All rights reserved. @@ -25,7 +25,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: November 12 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt LE 4 mvme88k .Os .Sh NAME @@ -66,8 +66,7 @@ closer to the AM7990DC chip at the bottom edge. .Pp The only supported configurations are: .Bl -column "xxxxxxxx" "xxxxxxxx" "xxxxxxxx" "0xffffffff" -offset indent -.It Li SW1 Ta SW2 Ta SW3 Ta Address -.It " " +.It Sy SW1 Ta Sy SW2 Ta Sy SW3 Ta Sy Address .It Li "UUU_UU_U" Ta "U__U____" Ta "______U_" Ta "0xffff1200" .It Li "UUU_U_UU" Ta "U__U_U__" Ta "______U_" Ta "0xffff1400" .It Li "UUU_U__U" Ta "U__UU___" Ta "______U_" Ta "0xffff1600" diff --git a/share/man/man4/man4.mvme88k/vs.4 b/share/man/man4/man4.mvme88k/vs.4 index 86e04ebe8e3..b1fc4f956e0 100644 --- a/share/man/man4/man4.mvme88k/vs.4 +++ b/share/man/man4/man4.mvme88k/vs.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vs.4,v 1.10 2010/07/03 09:20:06 krw Exp $ +.\" $OpenBSD: vs.4,v 1.11 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003 Paul Weissmann .\" All rights reserved. @@ -25,7 +25,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VS 4 mvme88k .Os .Sh NAME @@ -61,8 +61,8 @@ known with certitude. .Ss MVME328 channel configuration The following table lists the channel configuration for Motorola MVME328 boards. -.Bl -column "Model Number" "Differential" "Channel 1" -offset indent -.It Li Model Number Ta Channel 0 Ta Channel 1 +.Bl -column "Model Number" "Single-ended" "Single-ended" -offset indent +.It Sy "Model Number" Ta Sy "Channel 0" Ta Sy "Channel 1" .It Li MVME328-1 Ta Single-ended Ta Missing .It Li MVME328-2 Ta Single-ended Ta Single-ended .It Li MVME328-3 Ta Differential Ta Missing @@ -71,8 +71,8 @@ boards. .Ss MVME328S channel configuration The following table lists the channel configuration for Motorola MVME328S boards. -.Bl -column "Model Number" "Differential" "Channel 1" -offset indent -.It Li Model Number Ta Channel 0 Ta Channel 1 +.Bl -column "Model Number" "Single-ended" "Single-ended" -offset indent +.It Sy "Model Number" Ta Sy "Channel 0" Ta Sy "Channel 1" .It Li MVME328S-1 Ta Single-ended Ta Missing .It Li MVME328S-2 Ta Single-ended Ta Single-ended .\" No -3 model @@ -100,8 +100,8 @@ dual jumper, located immediately to the left of the block. .Pp The only supported configurations are: -.Bl -column "xxxxxxxxx" "0xffffffff" -offset indent -.It Li JB1 Ta Address Ta Configuration +.Bl -column "xxxxxxxxx" "0xffffffff" "Configuration" -offset indent +.It Sy JB1 Ta Sy Address Ta Sy Configuration .It Li "___X_XX__" Ta "0xffff9000" Ta "1st board" .It Li "_____XX__" Ta "0xffff9800" Ta "2nd board" .It Li "____XX_X_" Ta "0xffff4800" Ta "3rd board" @@ -118,8 +118,8 @@ the bottom row of eleven jumpers should have the leftmost jumper set and the ten rightmost jumpers open. .Pp The only supported configurations for the top row are: -.Bl -column "xxxxxxxxxxx" "0xffffffff" -offset indent -.It Li Jumpers Ta Address Ta Configuration +.Bl -column "xxxxxxxxxxx" "0xffffffff" "Configuration" -offset indent +.It Sy Jumpers Ta Sy Address Ta Sy Configuration .It Li "___X_XX____" Ta "0xffff9000" Ta "1st board" .It Li "_____XX____" Ta "0xffff9800" Ta "2nd board" .It Li "____XX_X___" Ta "0xffff4800" Ta "3rd board" diff --git a/share/man/man4/man4.mvme88k/vsbic.4 b/share/man/man4/man4.mvme88k/vsbic.4 index 53d7ec0450b..007ea96926e 100644 --- a/share/man/man4/man4.mvme88k/vsbic.4 +++ b/share/man/man4/man4.mvme88k/vsbic.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vsbic.4,v 1.3 2010/07/03 09:20:06 krw Exp $ +.\" $OpenBSD: vsbic.4,v 1.4 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2009 Miodrag Vallat. .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: July 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VSBIC 4 mvme88k .Os .Sh NAME @@ -47,7 +47,7 @@ on the board, near its center. With the card oriented with its faceplate at the bottom and the VME connectors at the top, the supported configurations are: .Bl -column "xxxxxxxx" "0xffffffff" -offset indent -.It Li J5 Ta Address Ta Configuration +.It Sy J5 Ta Sy Address Ta Sy Configuration .It Li "_X_XX__X" Ta "0xffffa600" Ta "1st board" .It Li "_X_XX___" Ta "0xffffa700" Ta "2nd board" .El diff --git a/share/man/man4/man4.sgi/intro.4 b/share/man/man4/man4.sgi/intro.4 index 58c19a44319..6ba0ae866d8 100644 --- a/share/man/man4/man4.sgi/intro.4 +++ b/share/man/man4/man4.sgi/intro.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: intro.4,v 1.22 2009/11/02 18:48:45 miod Exp $ +.\" $OpenBSD: intro.4,v 1.23 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2009 Miodrag Vallat. .\" @@ -38,7 +38,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: November 2 2009 $ +.Dd $Mdocdate: September 3 2011 $ .Dt INTRO 4 sgi .Os .Sh NAME @@ -96,10 +96,8 @@ The autoconfiguration system is described in A list of the supported devices is given below. .Sh HARDWARE The following systems are supported: -.Pp -.Bl -column "Hardware" "Family" "Kernel" "Model" -.It Li Hardware Ta Family Ta Kernel Ta Model -.It Li " " " " +.Bl -column "Hardware" "Family" "Kernel" "Model" -offset 3n +.It Sy Hardware Ta Sy Family Ta Sy Kernel Ta Sy Model .It Li IP27 Ta IP27 Ta IP27 Ta "Origin 2x00, Onyx 2" .It Li IP29 Ta IP27 Ta IP27 Ta "Origin 200" .It Li IP30 Ta IP30 Ta IP30 Ta "Octane, Octane 2 (Speedracer)" diff --git a/share/man/man4/man4.sparc/cgthree.4 b/share/man/man4/man4.sparc/cgthree.4 index 44fcc028165..1e8935bf240 100644 --- a/share/man/man4/man4.sparc/cgthree.4 +++ b/share/man/man4/man4.sparc/cgthree.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: cgthree.4,v 1.30 2008/03/31 07:44:30 jmc Exp $ +.\" $OpenBSD: cgthree.4,v 1.31 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: cgthree.4,v 1.4 1998/06/11 08:32:20 fair Exp $ .\" .\" Copyright (c) 1992, 1993 @@ -35,7 +35,7 @@ .\" from: Header: cgthree.4,v 1.3 94/02/03 20:49:52 leres Exp .\" from: @(#)cgthree.4 8.2 (Berkeley) 2/16/94 .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt CGTHREE 4 sparc .Os .Sh NAME @@ -112,9 +112,8 @@ Note that not all models support settings other than their default setting. These frame buffers are cgthree-compatible cards with a VGA-compatible video connector. There are only two resolutions supported, selected by jumper JP2 on the card: -.Bl -column "short" "Resolution" -.It Li JP2 Ta Resolution -.It " " +.Bl -column "short" "Resolution" -offset indent +.It Sy JP2 Ta Sy Resolution .It Li "open" Ta "1024x768, 60Hz" .It Li "short" Ta "1152x900, 66Hz" .El diff --git a/share/man/man4/man4.sparc/fga.4 b/share/man/man4/man4.sparc/fga.4 index 1828e6ff4be..70c98c0c5d8 100644 --- a/share/man/man4/man4.sparc/fga.4 +++ b/share/man/man4/man4.sparc/fga.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: fga.4,v 1.11 2007/05/31 19:19:56 jmc Exp $ +.\" $OpenBSD: fga.4,v 1.12 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 1999 Jason L. Wright (jason@thought.net) .\" All rights reserved. @@ -27,7 +27,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: May 31 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt FGA 4 sparc .Os .Sh NAME @@ -54,14 +54,14 @@ VME devices are attached to the pseudo-devices, which provide an interface for drivers to establish VME level/vectored interrupts and map address ranges. By default the following address ranges are established: -.Bl -column "256MBXXX" "SBus Slot" "SBus Offset" "VME Space" "VME Offset" -offset indent -.It Sy Size SBus Slot SBus Offset VME Space VME Offset -.It Dv "256MB" No " 1" No " 0x0000000" No " A32/D32 0xf0000000" -.It Dv "256MB" No " 4" No " 0x0000000" No " A32/D16 0xf0000000" -.It Dv "16MB" No " 5" No " 0xe000000" No " A24/D16 0x000000" -.It Dv "64KB" No " 5" No " 0xffc0000" No " A16/D8 0x0000" -.It Dv "64KB" No " 5" No " 0xffd0000" No " A16/D16 0x0000" -.It Dv "64KB" No " 5" No " 0xffe0000" No " A16/D32 0x0000" +.Bl -column "256MB" "SBus Slot" "SBus Offset" "VME Space" "VME Offset" -offset indent +.It Sy "Size" Ta Sy "SBus Slot" Ta Sy "SBus Offset" Ta Sy "VME Space" Ta Sy "VME Offset" +.It "256MB" Ta "1" Ta "0x0000000" Ta "A32/D32" Ta "0xf0000000" +.It "256MB" Ta "4" Ta "0x0000000" Ta "A32/D16" Ta "0xf0000000" +.It "16MB" Ta "5" Ta "0xe000000" Ta "A24/D16" Ta "0x000000" +.It "64KB" Ta "5" Ta "0xffc0000" Ta "A16/D8" Ta "0x0000" +.It "64KB" Ta "5" Ta "0xffd0000" Ta "A16/D16" Ta "0x0000" +.It "64KB" Ta "5" Ta "0xffe0000" Ta "A16/D32" Ta "0x0000" .El .Pp The abort switch on the FORCE CPU boards is also controlled by the diff --git a/share/man/man4/man4.sparc/mgx.4 b/share/man/man4/man4.sparc/mgx.4 index f49d58040c3..dac8dba1c42 100644 --- a/share/man/man4/man4.sparc/mgx.4 +++ b/share/man/man4/man4.sparc/mgx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: mgx.4,v 1.11 2008/04/15 20:23:53 miod Exp $ +.\" $OpenBSD: mgx.4,v 1.12 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003, 2005 Miodrag Vallat .\" @@ -23,7 +23,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: April 15 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt MGX 4 sparc .Os .Sh NAME @@ -59,28 +59,27 @@ A different resolution can be forced using the set of DIP switches located near the SBus connector on the board itself. .Pp The DIP switch settings are as follows: -.Bl -column " 1 2 3 4" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Details -.It Li " 1 2 3 4" Ta "" Ta "Rate" Ta "" -.It " " +.Bl -column "OFF OFF OFF OFF" "Resolution" "Refresh Rate" "Details" +.It Sy "Switches" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Details" +.It Sy "1 2 3 4" Ta "" Ta "" Ta "" .\" 0 -.It Li "OFF OFF OFF OFF" Ta 1024x768 Ta 77Hz +.It Li "OFF OFF OFF OFF" Ta 1024x768 Ta 77Hz Ta "" .\" 2 -.It Li "OFF ON OFF OFF" Ta 1280x1024 Ta 76Hz +.It Li "OFF ON OFF OFF" Ta 1280x1024 Ta 76Hz Ta "" .\" 3 (exactly the same as #7. Not a typo) -.It Li "ON ON OFF OFF" Ta 1152x900 Ta 66Hz +.It Li "ON ON OFF OFF" Ta 1152x900 Ta 66Hz Ta "" .\" 4 -.It Li "OFF OFF ON OFF" Ta 1152x900 Ta 76Hz +.It Li "OFF OFF ON OFF" Ta 1152x900 Ta 76Hz Ta "" .\" 6 -.It Li "OFF ON ON OFF" Ta 1152x900 Ta 77Hz +.It Li "OFF ON ON OFF" Ta 1152x900 Ta 77Hz Ta "" .\" 7 -.It Li "ON ON ON OFF" Ta 1152x900 Ta 66Hz Ta cgthree compatible +.It Li "ON ON ON OFF" Ta 1152x900 Ta 66Hz Ta "cgthree compatible" .\" 11 -.It Li "ON ON OFF ON " Ta 1152x900 Ta 66Hz Ta cgsix compatible +.It Li "ON ON OFF ON " Ta 1152x900 Ta 66Hz Ta "cgsix compatible" .\" 12 -.It Li "OFF OFF ON ON " Ta 1280x1024 Ta 67Hz +.It Li "OFF OFF ON ON " Ta 1280x1024 Ta 67Hz Ta "" .\" 15 -.It Li "ON ON ON ON " Ta probed Ta probed Ta factory default +.It Li "ON ON ON ON " Ta probed Ta probed Ta "factory default" .El .Pp All other combinations are unsupported and may damage the hardware. diff --git a/share/man/man4/man4.sparc/rfx.4 b/share/man/man4/man4.sparc/rfx.4 index 0947ad63432..7ae871d00a5 100644 --- a/share/man/man4/man4.sparc/rfx.4 +++ b/share/man/man4/man4.sparc/rfx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rfx.4,v 1.5 2008/06/07 20:42:27 miod Exp $ +.\" $OpenBSD: rfx.4,v 1.6 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2004, Miodrag Vallat. .\" All rights reserved. @@ -24,7 +24,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: June 7 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt RFX 4 sparc .Os .Sh NAME @@ -85,25 +85,23 @@ If the jumper position is not specified it means it has to be removed .Pq open . .Ss RasterFlex-24 and RasterFlex-32 Jumper Settings: -.Bl -column "Jumpers" "Resolution" "Refresh" -.It Li "J2 J3 J4" Ta Resolution Ta Refresh Ta Description -.It " " -.It Li " R R R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" +.Bl -column "J2 J3 J4" "Resolution" "Refresh Rate" "Description" -offset indent +.It Sy "J2 J3 J4" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Description" +.It Li "\ \&R \ \&R \ \&R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" .It Li "L L L " Ta 1024x768 Ta 76Hz Ta "SVGA" -.It Li "L _ _ " Ta 1152x900 Ta 66Hz -.It Li "_ L L " Ta 1152x900 Ta 76Hz +.It Li "L _ _ " Ta 1152x900 Ta 66Hz Ta "" +.It Li "_ L L " Ta 1152x900 Ta 76Hz Ta "" .El .Ss RasterFlex-HR Jumper Settings: -.Bl -column "Jumpers" "Resolution" "Refresh" -.It Li "J2 J3 J4" Ta Resolution Ta Refresh Ta Description -.It " " -.It Li " R R R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" +.Bl -column "J2 J3 J4" "Resolution" "Refresh Rate" "Description" -offset indent +.It Sy "J2 J3 J4" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Description" +.It Li "\ \&R \ \&R \ \&R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" .It Li "L L L " Ta 1024x768 Ta 76Hz Ta "SVGA" -.It Li "L _ _ " Ta 1152x900 Ta 66Hz -.It Li "L L _ " Ta 1152x900 Ta 76Hz -.It Li "_ L _ " Ta 1280x1024 Ta 60Hz -.It Li "_ L L " Ta 1280x1024 Ta 67Hz -.It Li "L _ L " Ta 1280x1024 Ta 76Hz +.It Li "L _ _ " Ta 1152x900 Ta 66Hz Ta "" +.It Li "L L _ " Ta 1152x900 Ta 76Hz Ta "" +.It Li "_ L _ " Ta 1280x1024 Ta 60Hz Ta "" +.It Li "_ L L " Ta 1280x1024 Ta 67Hz Ta "" +.It Li "L _ L " Ta 1280x1024 Ta 76Hz Ta "" .El .Sh SEE ALSO .Xr intro 4 , diff --git a/share/man/man4/man4.sparc/tcx.4 b/share/man/man4/man4.sparc/tcx.4 index c8e12855859..3c38e7e6c09 100644 --- a/share/man/man4/man4.sparc/tcx.4 +++ b/share/man/man4/man4.sparc/tcx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tcx.4,v 1.33 2009/11/26 20:22:50 jmc Exp $ +.\" $OpenBSD: tcx.4,v 1.34 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: tcx.4,v 1.3 1997/10/08 22:00:14 jtc Exp $ .\" .\" Copyright (c) 1996 The NetBSD Foundation, Inc. @@ -28,7 +28,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: November 26 2009 $ +.Dd $Mdocdate: September 3 2011 $ .Dt TCX 4 sparc .Os .Sh NAME @@ -78,8 +78,8 @@ The supported video modes depend on the particular frame buffer type. .\" .Ss TCX (8 bit) video modes The 8 bit frame buffer supports the following video modes: -.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -.It Li Mode identifier Ta Resolution Ta Refresh Rate (MHz) +.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -offset indent +.It Sy "Mode identifier" Ta Sy "Resolution" Ta Sy "Refresh Rate (MHz)" .\" refresh rate not confirmed for the following mode .It Li r640x480x21 Ta 640x480 Ta 56Hz .It Li r640x480x25 Ta 640x480 Ta 60Hz @@ -113,8 +113,8 @@ The 8 bit frame buffer supports the following video modes: .Pp With the addition of a 1MB VSIMM, the following higher resolution models become available: -.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -.It Li Mode identifier Ta Resolution Ta Refresh Rate (MHz) +.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -offset indent +.It Sy "Mode identifier" Ta Sy "Resolution" Ta Sy "Refresh Rate (MHz)" .It Li r1280x1024x117 Ta 1280x1024 Ta 66Hz .It Li r1280x1024x118 Ta 1280x1024 Ta 67Hz .It Li r1280x1024x135 Ta 1280x1024 Ta 76Hz @@ -148,8 +148,8 @@ is absolutely necessary for the resolution settings to be honoured. .\" .Ss S24 (24 bit) video modes The 24 bit frame buffer only supports the following video modes: -.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -.It Li Mode identifier Ta Resolution Ta Refresh Rate (MHz) +.Bl -column "Mode identifier" "Resolution" "Refresh Rate" -offset indent +.It Sy Mode identifier Ta Sy "Resolution" Ta Sy "Refresh Rate (MHz)" .It Li r1024x768x70 Ta 1024x768 Ta 70Hz .It Li r1152x900x66 Ta 1152x900 Ta 66Hz .It Li r1152x900x76 Ta 1152x900 Ta 76Hz diff --git a/share/man/man4/man4.sparc/tvtwo.4 b/share/man/man4/man4.sparc/tvtwo.4 index 4859df82385..880e287f285 100644 --- a/share/man/man4/man4.sparc/tvtwo.4 +++ b/share/man/man4/man4.sparc/tvtwo.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tvtwo.4,v 1.16 2008/03/31 07:44:30 jmc Exp $ +.\" $OpenBSD: tvtwo.4,v 1.17 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2003 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt TVTWO 4 sparc .Os .Sh NAME @@ -57,8 +57,7 @@ of the board. .Pp The available modes are as follows: .Bl -column "Rotary" "Resolution" "Refresh Rate" -offset indent -.It Li Rotary Ta Resolution Ta "Refresh Rate" -.\" .It " " +.It Sy Rotary Ta Sy Resolution Ta Sy "Refresh Rate" .It Li 0 Ta autodetect Ta autodetect .It Li 1 Ta 1152x900 Ta 67Hz .It Li 2 Ta 1152x900 Ta 76Hz diff --git a/share/man/man4/man4.sparc/vigra.4 b/share/man/man4/man4.sparc/vigra.4 index d04242b5f54..3120e6c6ce9 100644 --- a/share/man/man4/man4.sparc/vigra.4 +++ b/share/man/man4/man4.sparc/vigra.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vigra.4,v 1.19 2008/03/31 07:44:30 jmc Exp $ +.\" $OpenBSD: vigra.4,v 1.20 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2002 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VIGRA 4 sparc .Os .Sh NAME @@ -51,10 +51,9 @@ The video resolution and signal synchronization modes are selected with four DIP switches on the back of the card. .Ss VS10 and VS12 Switch Settings: The VS10 and VS12 support the following basic modes: -.Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.Bl -column "Switches" "Resolution" "Refresh" "Description" +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D D D" Ta 640x480 Ta 60Hz Ta "Standard VGA, negative separate sync" .It Li "U D D D" Ta 800x600 Ta 56Hz Ta "Super VGA, negative separate sync" .It Li "D U D D" Ta 800x600 Ta 56Hz Ta "Super VGA, positive separate sync" @@ -71,10 +70,9 @@ The VS10 and VS12 support the following basic modes: .Ss VS12-only Switch Settings: The VS12 supports all of the previously listed modes, as well as a few high resolution settings. -.Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.Bl -column "Switches" "Resolution" "Refresh" "Description" +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, negative separate sync" .It Li "U D U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, composite sync" .It Li "D U U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, sync-on-green" @@ -83,10 +81,9 @@ resolution settings. .Ss VS11 Switch Settings: The VS11 supports a similar set of modes as the VS12, but with higher refresh rates. -.Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.Bl -column "Switches" "Resolution" "Refresh" "Description" +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D D D" Ta 640x480 Ta 60Hz Ta "Standard VGA, negative separate sync" .It Li "U D D D" Ta 800x600 Ta 72Hz Ta "VESA, negative separate sync" .It Li "D U D D" Ta 1024x768 Ta 60Hz Ta "VESA, negative separate sync" diff --git a/share/man/man4/man4.sparc/zx.4 b/share/man/man4/man4.sparc/zx.4 index b6f783d561e..142cafa2fcd 100644 --- a/share/man/man4/man4.sparc/zx.4 +++ b/share/man/man4/man4.sparc/zx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: zx.4,v 1.16 2010/07/10 19:38:39 miod Exp $ +.\" $OpenBSD: zx.4,v 1.17 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2003 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: July 10 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ZX 4 sparc .Os .Sh NAME @@ -51,9 +51,8 @@ but makes its functions available via the internal interface. .Sh DISPLAY RESOLUTION The following resolutions are supported by the ZX frame buffer: -.Bl -column "Resolution" "Refresh Rate" -.It Li Resolution Ta "Refresh Rate" -.It " " +.Bl -column "Resolution" "Refresh Rate" "Details" -offset indent +.It Sy Resolution Ta Sy "Refresh Rate" Ta Sy "Details" .It Li 1280x1024 Ta 76 Hz Ta Non-interlaced .It Li 1280x1024 Ta 67 Hz Ta Non-interlaced .It Li 1152x900 Ta 76 Hz Ta Non-interlaced @@ -61,10 +60,8 @@ The following resolutions are supported by the ZX frame buffer: .It Li 1024x768 Ta 76 Hz Ta Non-interlaced .It Li 1024x768 Ta 60 Hz Ta Non-interlaced .\" Is it worth documenting the Stereo and TV modes? -.It Li 960x680 Ta 112 Hz Ta "Stereo, non-interlaced" -.It Li "" Ta "" Ta "56 Hz field rate per eye" -.It Li 960x680 Ta 108 Hz Ta "Stereo, non-interlaced" -.It Li "" Ta "" Ta "54 Hz field rate per eye" +.It Li 960x680 Ta 112 Hz Ta "Stereo, non-interlaced 56 Hz field rate per eye" +.It Li 960x680 Ta 108 Hz Ta "Stereo, non-interlaced 54 Hz field rate per eye" .It Li 770x575 Ta 50 Hz Ta "Interlaced - PAL" .It Li 640x480 Ta 59.94 Hz Ta "Interlaced - NTSC" .El @@ -77,17 +74,16 @@ If the frame buffer is not connected to a monitor, the default resolution of 1152x900, with a 66 Hz refresh rate, will be selected. The selected resolutions are: .Bl -column "sense code" "Resolution" "Refresh" "Monitor" -.It Li Monitor Ta Resolution Ta Refresh Ta Monitor -.It Li "sense code" Ta "" Ta Rate Ta Type -.It " " -.It Li 0 Ta 1024x768 Ta "76 Hz" Ta X449A -.It Li 1 Ta 1152x900 Ta "66 Hz" -.It Li 2 Ta 1280x1024 Ta "76 Hz" Ta X248A, GDM-205S -.It Li 3 Ta 1152x900 Ta "66 Hz" Ta GDM-1955A15, GDM-1604A15, CPD-1790 -.It Li 4 Ta 1280x1024 Ta "67 Hz" Ta GDM-20D10, GDM-1962 -.It Li 5 Ta 1152x900 Ta "66 Hz" -.It Li 6 Ta 1152x900 Ta "76 Hz" Ta GDM-1662B, 17SMM4 -.It Li 7 Ta 1152x900 Ta "66 Hz" +.It Sy Monitor Ta Sy Resolution Ta Sy Refresh Ta Sy Monitor +.It Sy "sense code" Ta "" Ta Sy Rate Ta Sy Type +.It Li 0 Ta 1024x768 Ta "76 Hz" Ta "X449A" +.It Li 1 Ta 1152x900 Ta "66 Hz" Ta "" +.It Li 2 Ta 1280x1024 Ta "76 Hz" Ta "X248A, GDM-205S" +.It Li 3 Ta 1152x900 Ta "66 Hz" Ta "GDM-1955A15, GDM-1604A15, CPD-1790" +.It Li 4 Ta 1280x1024 Ta "67 Hz" Ta "GDM-20D10, GDM-1962" +.It Li 5 Ta 1152x900 Ta "66 Hz" Ta "" +.It Li 6 Ta 1152x900 Ta "76 Hz" Ta "GDM-1662B, 17SMM4" +.It Li 7 Ta 1152x900 Ta "66 Hz" Ta "" .El .Sh SEE ALSO .Xr intro 4 , diff --git a/share/man/man4/man4.sparc64/ifb.4 b/share/man/man4/man4.sparc64/ifb.4 index 2035da607c1..f2de480458e 100644 --- a/share/man/man4/man4.sparc64/ifb.4 +++ b/share/man/man4/man4.sparc64/ifb.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ifb.4,v 1.6 2009/01/21 17:03:13 miod Exp $ +.\" $OpenBSD: ifb.4,v 1.7 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2008 Miodrag Vallat. .\" @@ -15,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: January 21 2009 $ +.Dd $Mdocdate: September 3 2011 $ .Dt IFB 4 sparc64 .Os .Sh NAME @@ -60,34 +60,34 @@ to change to a 76Hz 1280x1024 resolution. The .Nm frame buffer accepts the following resolutions: -.Bl -column "Mode identifier" "Resolution" "Refresh" "" -.It Li Mode identifier Ta Resolution Ta Refresh -.It Li "" Ta "" Ta "Rate (Hz)" -.It Li r640x480x60 Ta 640x480 Ta 60 -.It Li r640x480x60i Ta 640x480 Ta 60 Ta Composite sync -.It Li r768x575x50i Ta 768x575 Ta 50 -.It Li r1024x768x60 Ta 1024x768 Ta 60 Ta Composite sync -.It Li r1024x768x70 Ta 1024x768 Ta 70 -.It Li r1024x768x75 Ta 1024x768 Ta 75 -.It Li r1024x768x77 Ta 1024x768 Ta 77 -.It Li r1024x800x84 Ta 1024x800 Ta 84 Ta Composite sync -.It Li r1152x900x66 Ta 1152x900 Ta 66 Ta Composite sync -.It Li r1152x900x76 Ta 1152x900 Ta 76 Ta Composite sync -.\" .It Li r1280x768x56 Ta 1280x768 Ta 56 -.It Li r1280x800x76 Ta 1280x1024 Ta 76 -.It Li r1280x1024x60 Ta 1280x1024 Ta 60 -.It Li r1280x1024x67 Ta 1280x1024 Ta 67 Ta Composite sync -.It Li r1280x1024x75 Ta 1280x1024 Ta 75 -.It Li r1280x1024x76 Ta 1280x1024 Ta 76 Ta Composite sync -.It Li r1280x1024x85 Ta 1280x1024 Ta 85 -.It Li r1440x900x76 Ta 1440x900 Ta 76 Ta Composite sync -.It Li r1600x1000x66 Ta 1600x1000 Ta 66 -.It Li r1600x1000x76 Ta 1600x1000 Ta 76 Ta Composite sync -.It Li r1600x1280x76 Ta 1600x1280 Ta 76 -.It Li r1792x1344x75 Ta 1792x1344 Ta 75 -.It Li r1920x1080x72 Ta 1920x1080 Ta 72 Ta Composite sync -.It Li r1920x1200x70 Ta 1920x1200 Ta 70 -.It Li r1920x1200x75 Ta 1920x1200 Ta 75 +.Bl -column "Mode identifier" "Resolution" "Rate(Hz)" "" +.It Sy "Mode" Ta Sy "Resolution" Ta Sy "Refresh" Ta "" +.It Sy "Identifier" Ta "" Ta Sy "Rate (Hz)" Ta "" +.It Li r640x480x60 Ta 640x480 Ta 60 Ta "" +.It Li r640x480x60i Ta 640x480 Ta 60 Ta "Composite sync" +.It Li r768x575x50i Ta 768x575 Ta 50 Ta "" +.It Li r1024x768x60 Ta 1024x768 Ta 60 Ta "Composite sync" +.It Li r1024x768x70 Ta 1024x768 Ta 70 Ta "" +.It Li r1024x768x75 Ta 1024x768 Ta 75 Ta "" +.It Li r1024x768x77 Ta 1024x768 Ta 77 Ta "" +.It Li r1024x800x84 Ta 1024x800 Ta 84 Ta "Composite sync" +.It Li r1152x900x66 Ta 1152x900 Ta 66 Ta "Composite sync" +.It Li r1152x900x76 Ta 1152x900 Ta 76 Ta "Composite sync" +.\" .It Li r1280x768x56 Ta 1280x768 Ta 56 Ta "" +.It Li r1280x800x76 Ta 1280x1024 Ta 76 Ta "" +.It Li r1280x1024x60 Ta 1280x1024 Ta 60 Ta "" +.It Li r1280x1024x67 Ta 1280x1024 Ta 67 Ta "Composite sync" +.It Li r1280x1024x75 Ta 1280x1024 Ta 75 Ta "" +.It Li r1280x1024x76 Ta 1280x1024 Ta 76 Ta "Composite sync" +.It Li r1280x1024x85 Ta 1280x1024 Ta 85 Ta "" +.It Li r1440x900x76 Ta 1440x900 Ta 76 Ta "Composite sync" +.It Li r1600x1000x66 Ta 1600x1000 Ta 66 Ta "" +.It Li r1600x1000x76 Ta 1600x1000 Ta 76 Ta "Composite sync" +.It Li r1600x1280x76 Ta 1600x1280 Ta 76 Ta "" +.It Li r1792x1344x75 Ta 1792x1344 Ta 75 Ta "" +.It Li r1920x1080x72 Ta 1920x1080 Ta 72 Ta "Composite sync" +.It Li r1920x1200x70 Ta 1920x1200 Ta 70 Ta "" +.It Li r1920x1200x75 Ta 1920x1200 Ta 75 Ta "" .El .Pp Modes with the suffix letter diff --git a/share/man/man4/man4.sparc64/mgx.4 b/share/man/man4/man4.sparc64/mgx.4 index 3634624eb1f..3644ec5ad5a 100644 --- a/share/man/man4/man4.sparc64/mgx.4 +++ b/share/man/man4/man4.sparc64/mgx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: mgx.4,v 1.12 2008/04/15 20:23:53 miod Exp $ +.\" $OpenBSD: mgx.4,v 1.13 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2003, 2005 Miodrag Vallat .\" @@ -23,7 +23,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: April 15 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt MGX 4 sparc64 .Os .Sh NAME @@ -59,28 +59,27 @@ A different resolution can be forced using the set of DIP switches located near the SBus connector on the board itself. .Pp The DIP switch settings are as follows: -.Bl -column " 1 2 3 4" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Details -.It Li " 1 2 3 4" Ta "" Ta "Rate" Ta "" -.It " " +.Bl -column "OFF OFF OFF OFF" "Resolution" "Refresh Rate" "Details" +.It Sy "Switches" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Details" +.It Sy "1 2 3 4" Ta "" Ta "" Ta "" .\" 0 -.It Li "OFF OFF OFF OFF" Ta 1024x768 Ta 77Hz +.It Li "OFF OFF OFF OFF" Ta 1024x768 Ta 77Hz Ta "" .\" 2 -.It Li "OFF ON OFF OFF" Ta 1280x1024 Ta 76Hz +.It Li "OFF ON OFF OFF" Ta 1280x1024 Ta 76Hz Ta "" .\" 3 (exactly the same as #7. Not a typo) -.It Li "ON ON OFF OFF" Ta 1152x900 Ta 66Hz +.It Li "ON ON OFF OFF" Ta 1152x900 Ta 66Hz Ta "" .\" 4 -.It Li "OFF OFF ON OFF" Ta 1152x900 Ta 76Hz +.It Li "OFF OFF ON OFF" Ta 1152x900 Ta 76Hz Ta "" .\" 6 -.It Li "OFF ON ON OFF" Ta 1152x900 Ta 77Hz +.It Li "OFF ON ON OFF" Ta 1152x900 Ta 77Hz Ta "" .\" 7 -.It Li "ON ON ON OFF" Ta 1152x900 Ta 66Hz Ta cgthree compatible +.It Li "ON ON ON OFF" Ta 1152x900 Ta 66Hz Ta "cgthree compatible" .\" 11 -.It Li "ON ON OFF ON " Ta 1152x900 Ta 66Hz Ta cgsix compatible +.It Li "ON ON OFF ON " Ta 1152x900 Ta 66Hz Ta "cgsix compatible" .\" 12 -.It Li "OFF OFF ON ON " Ta 1280x1024 Ta 67Hz +.It Li "OFF OFF ON ON " Ta 1280x1024 Ta 67Hz Ta "" .\" 15 -.It Li "ON ON ON ON " Ta probed Ta probed Ta factory default +.It Li "ON ON ON ON " Ta probed Ta probed Ta "factory default" .El .Pp All other combinations are unsupported and may damage the hardware. diff --git a/share/man/man4/man4.sparc64/rfx.4 b/share/man/man4/man4.sparc64/rfx.4 index 3e83b392745..ad822704a0d 100644 --- a/share/man/man4/man4.sparc64/rfx.4 +++ b/share/man/man4/man4.sparc64/rfx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rfx.4,v 1.10 2008/06/07 20:42:28 miod Exp $ +.\" $OpenBSD: rfx.4,v 1.11 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2004, Miodrag Vallat. .\" All rights reserved. @@ -24,7 +24,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: June 7 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt RFX 4 sparc64 .Os .Sh NAME @@ -85,25 +85,23 @@ If the jumper position is not specified it means it has to be removed .Pq open . .Ss RasterFlex-24 and RasterFlex-32 Jumper Settings: -.Bl -column "Jumpers" "Resolution" "Refresh" -.It Li "J2 J3 J4" Ta Resolution Ta Refresh Ta Description -.It " " -.It Li " R R R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" +.Bl -column "J2 J3 J4" "Resolution" "Refresh Rate" "Description" -offset indent +.It Sy "J2 J3 J4" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Description" +.It Li "\ \&R \ \&R \ \&R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" .It Li "L L L " Ta 1024x768 Ta 76Hz Ta "SVGA" -.It Li "L _ _ " Ta 1152x900 Ta 66Hz -.It Li "_ L L " Ta 1152x900 Ta 76Hz +.It Li "L _ _ " Ta 1152x900 Ta 66Hz Ta "" +.It Li "_ L L " Ta 1152x900 Ta 76Hz Ta "" .El .Ss RasterFlex-HR Jumper Settings: -.Bl -column "Jumpers" "Resolution" "Refresh" -.It Li "J2 J3 J4" Ta Resolution Ta Refresh Ta Description -.It " " -.It Li " R R R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" +.Bl -column "J2 J3 J4" "Resolution" "Refresh Rate" "Description" -offset indent +.It Sy "J2 J3 J4" Ta Sy "Resolution" Ta Sy "Refresh Rate" Ta Sy "Description" +.It Li "\ \&R \ \&R \ \&R" Ta 1152x900 Ta 66Hz Ta "Automatic Configuration" .It Li "L L L " Ta 1024x768 Ta 76Hz Ta "SVGA" -.It Li "L _ _ " Ta 1152x900 Ta 66Hz -.It Li "L L _ " Ta 1152x900 Ta 76Hz -.It Li "_ L _ " Ta 1280x1024 Ta 60Hz -.It Li "_ L L " Ta 1280x1024 Ta 67Hz -.It Li "L _ L " Ta 1280x1024 Ta 76Hz +.It Li "L _ _ " Ta 1152x900 Ta 66Hz Ta "" +.It Li "L L _ " Ta 1152x900 Ta 76Hz Ta "" +.It Li "_ L _ " Ta 1280x1024 Ta 60Hz Ta "" +.It Li "_ L L " Ta 1280x1024 Ta 67Hz Ta "" +.It Li "L _ L " Ta 1280x1024 Ta 76Hz Ta "" .El .Sh SEE ALSO .Xr intro 4 , diff --git a/share/man/man4/man4.sparc64/tvtwo.4 b/share/man/man4/man4.sparc64/tvtwo.4 index 4d045a28136..b68ced87e89 100644 --- a/share/man/man4/man4.sparc64/tvtwo.4 +++ b/share/man/man4/man4.sparc64/tvtwo.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tvtwo.4,v 1.9 2008/03/31 08:12:22 jmc Exp $ +.\" $OpenBSD: tvtwo.4,v 1.10 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2003 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt TVTWO 4 sparc64 .Os .Sh NAME @@ -57,8 +57,7 @@ of the board. .Pp The available modes are as follows: .Bl -column "Rotary" "Resolution" "Refresh Rate" -offset indent -.It Li Rotary Ta Resolution Ta "Refresh Rate" -.\" .It " " +.It Sy Rotary Ta Sy Resolution Ta Sy "Refresh Rate" .It Li 0 Ta autodetect Ta autodetect .It Li 1 Ta 1152x900 Ta 67Hz .It Li 2 Ta 1152x900 Ta 76Hz diff --git a/share/man/man4/man4.sparc64/uperf.4 b/share/man/man4/man4.sparc64/uperf.4 index 8aa7ccf9012..48021b4d06f 100644 --- a/share/man/man4/man4.sparc64/uperf.4 +++ b/share/man/man4/man4.sparc64/uperf.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: uperf.4,v 1.14 2007/05/31 19:19:57 jmc Exp $ +.\" $OpenBSD: uperf.4,v 1.15 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2002 Jason L. Wright (jason@thought.net) .\" All rights reserved. @@ -24,7 +24,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: May 31 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt UPERF 4 sparc64 .Os .Sh NAME @@ -73,57 +73,108 @@ fields specify the source for the counter. Not all counters support monitoring all sources and specifying an invalid source for a counter to monitor will result in an error. The sources are specified below: -.Bl -column "XXXXXXXXXXXXXX" "description" -offset indent -.It Em UPERFSRC_SYSCK Ta "system clock ticks" -.It Em UPERFSRC_PRALL Ta "all p-requests" -.It Em UPERFSRC_PRP0 Ta "p-requests from processor 0" -.It Em UPERFSRC_PRU2S Ta "p-requests from the U2S" -.It Em UPERFSRC_UPA128 Ta "cycles UPA 128 bit data is busy" -.It Em UPERFSRC_UPA64 Ta "cycles UPA 64 bit data is busy" -.It Em UPERFSRC_PIOS Ta "cycles stalled during PIO" -.It Em UPERFSRC_MEMRI Ta "memory requests issued" -.It Em UPERFSRC_MCBUSY Ta "cycles memory controller is busy" -.It Em UPERFSRC_PXSH Ta "stall cycles due to pending transaction scoreboard hit" -.It Em UPERFSRC_P0CWMR Ta "coherent write miss requests, processor 0" -.It Em UPERFSRC_P1CWMR Ta "coherent write miss requests, processor 1" -.It Em UPERFSRC_CIT Ta "coherent intervention transactions" -.It Em UPERFSRC_U2SDAT Ta "data transactions on U2S" -.It Em UPERFSRC_CRXI Ta "coherent read transactions issued" -.It Em UPERFSRC_RDP0 Ta "read requests, processor 0" -.It Em UPERFSRC_P0CRMR Ta "coherent read misses, processor 0" -.It Em UPERFSRC_P0PIO Ta "PIO accesses, processor 0" -.It Em UPERFSRC_MEMRC Ta "memory requests completed" -.It Em UPERFSRC_P1RR Ta "read requests, processor 1" -.It Em UPERFSRC_CRMP1 Ta "coherent read misses, processor 1" -.It Em UPERFSRC_PIOP1 Ta "PIO accesses, processor 1" -.It Em UPERFSRC_CWXI Ta "coherent write transactions issued" -.It Em UPERFSRC_RP0 Ta "read requests, processor 0" -.It Em UPERFSRC_SDVRA Ta "streaming DVMA read transfers, PCI bus A" -.It Em UPERFSRC_SDVWA Ta "streaming DVMA write transfers, PCI bus A" -.It Em UPERFSRC_CDVRA Ta "consistent DVMA read transfers, PCI bus A" -.It Em UPERFSRC_CDVWA Ta "consistent DVMA write transfers, PCI bus A" -.It Em UPERFSRC_SBMA Ta "streaming buffer misses, PCI bus A" -.It Em UPERFSRC_DVA Ta "DVMA cycles, PCI bus A" -.It Em UPERFSRC_DVWA Ta "words transferred via DVMA, PCI bus A" -.It Em UPERFSRC_PIOA Ta "cycles consumed by PIO, bus A" -.It Em UPERFSRC_SDVRB Ta "streaming DVMA read transfers, PCI bus B" -.It Em UPERFSRC_SDVWB Ta "streaming DVMA write transfers, PCI bus B" -.It Em UPERFSRC_CDVRB Ta "consistent DVMA read transfers, PCI bus B" -.It Em UPERFSRC_CDVWB Ta "consistent DVMA write transfers, PCI bus B" -.It Em UPERFSRC_SBMB Ta "streaming buffer misses, PCI bus B" -.It Em UPERFSRC_DVB Ta "DVMA cycles, PCI bus B" -.It Em UPERFSRC_DVWB Ta "words transferred via DVMA, PCI bus B" -.It Em UPERFSRC_PIOB Ta "cycles consumed by PIO, bus B" -.It Em UPERFSRC_TLBMISS Ta "TLB misses" -.It Em UPERFSRC_NINTRS Ta "interrupts" -.It Em UPERFSRC_INACK Ta "interrupt NACKS on UPA" -.It Em UPERFSRC_PIOR Ta "PIO read transfers" -.It Em UPERFSRC_PIOW Ta "PIO write transfers" -.It Em UPERFSRC_MERGE Ta "merge buffer transactions" -.It Em UPERFSRC_TBLA Ta "DMA requests retried due to tablewalks, PCI bus A" -.It Em UPERFSRC_STCA Ta "DMA requests retries due to STC, PCI bus A" -.It Em UPERFSRC_TBLB Ta "DMA requests retries due to tablewalks, PCI bus B" -.It Em UPERFSRC_STCB Ta "DMA requests retries due to STC, PCI bus B" +.Pp +.Bl -tag -width "UPERFSRC_TLBMISS" -offset indent -compact +.It Em UPERFSRC_SYSCK +system clock ticks +.It Em UPERFSRC_PRALL +all p-requests +.It Em UPERFSRC_PRP0 +p-requests from processor 0 +.It Em UPERFSRC_PRU2S +p-requests from the U2S +.It Em UPERFSRC_UPA128 +cycles UPA 128 bit data is busy +.It Em UPERFSRC_UPA64 +cycles UPA 64 bit data is busy +.It Em UPERFSRC_PIOS +cycles stalled during PIO +.It Em UPERFSRC_MEMRI +memory requests issued +.It Em UPERFSRC_MCBUSY +cycles memory controller is busy +.It Em UPERFSRC_PXSH +stall cycles due to pending transaction scoreboard hit +.It Em UPERFSRC_P0CWMR +coherent write miss requests, processor 0 +.It Em UPERFSRC_P1CWMR +coherent write miss requests, processor 1 +.It Em UPERFSRC_CIT +coherent intervention transactions +.It Em UPERFSRC_U2SDAT +data transactions on U2S +.It Em UPERFSRC_CRXI +coherent read transactions issued +.It Em UPERFSRC_RDP0 +read requests, processor 0 +.It Em UPERFSRC_P0CRMR +coherent read misses, processor 0 +.It Em UPERFSRC_P0PIO +PIO accesses, processor 0 +.It Em UPERFSRC_MEMRC +memory requests completed +.It Em UPERFSRC_P1RR +read requests, processor 1 +.It Em UPERFSRC_CRMP1 +coherent read misses, processor 1 +.It Em UPERFSRC_PIOP1 +PIO accesses, processor 1 +.It Em UPERFSRC_CWXI +coherent write transactions issued +.It Em UPERFSRC_RP0 +read requests, processor 0 +.It Em UPERFSRC_SDVRA +streaming DVMA read transfers, PCI bus A +.It Em UPERFSRC_SDVWA +streaming DVMA write transfers, PCI bus A +.It Em UPERFSRC_CDVRA +consistent DVMA read transfers, PCI bus A +.It Em UPERFSRC_CDVWA +consistent DVMA write transfers, PCI bus A +.It Em UPERFSRC_SBMA +streaming buffer misses, PCI bus A +.It Em UPERFSRC_DVA +DVMA cycles, PCI bus A +.It Em UPERFSRC_DVWA +words transferred via DVMA, PCI bus A +.It Em UPERFSRC_PIOA +cycles consumed by PIO, bus A +.It Em UPERFSRC_SDVRB +streaming DVMA read transfers, PCI bus B +.It Em UPERFSRC_SDVWB +streaming DVMA write transfers, PCI bus B +.It Em UPERFSRC_CDVRB +consistent DVMA read transfers, PCI bus B +.It Em UPERFSRC_CDVWB +consistent DVMA write transfers, PCI bus B +.It Em UPERFSRC_SBMB +streaming buffer misses, PCI bus B +.It Em UPERFSRC_DVB +DVMA cycles, PCI bus B +.It Em UPERFSRC_DVWB +words transferred via DVMA, PCI bus B +.It Em UPERFSRC_PIOB +cycles consumed by PIO, bus B +.It Em UPERFSRC_TLBMISS +TLB misses +.It Em UPERFSRC_NINTRS +interrupts +.It Em UPERFSRC_INACK +interrupt NACKS on UPA +.It Em UPERFSRC_PIOR +PIO read transfers +.It Em UPERFSRC_PIOW +PIO write transfers +.It Em UPERFSRC_MERGE +merge buffer transactions +.It Em UPERFSRC_TBLA +DMA requests retried due to tablewalks, PCI bus A +.It Em UPERFSRC_STCA +DMA requests retries due to STC, PCI bus A +.It Em UPERFSRC_TBLB +DMA requests retries due to tablewalks, PCI bus B +.It Em UPERFSRC_STCB +DMA requests retries due to STC, PCI bus B .El .Pp The diff --git a/share/man/man4/man4.sparc64/vigra.4 b/share/man/man4/man4.sparc64/vigra.4 index de7ca4d1882..c84905518cd 100644 --- a/share/man/man4/man4.sparc64/vigra.4 +++ b/share/man/man4/man4.sparc64/vigra.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vigra.4,v 1.6 2008/03/31 08:12:22 jmc Exp $ +.\" $OpenBSD: vigra.4,v 1.7 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2002 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VIGRA 4 sparc64 .Os .Sh NAME @@ -52,9 +52,8 @@ selected with four DIP switches on the back of the card. .Ss VS10 and VS12 Switch Settings: The VS10 and VS12 support the following basic modes: .Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D D D" Ta 640x480 Ta 60Hz Ta "Standard VGA, negative separate sync" .It Li "U D D D" Ta 800x600 Ta 56Hz Ta "Super VGA, negative separate sync" .It Li "D U D D" Ta 800x600 Ta 56Hz Ta "Super VGA, positive separate sync" @@ -72,9 +71,8 @@ The VS10 and VS12 support the following basic modes: The VS12 supports all of the previously listed modes, as well as a few high resolution settings. .Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, negative separate sync" .It Li "U D U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, composite sync" .It Li "D U U U" Ta 1280x1024 Ta 60Hz Ta "NEC xD, sync-on-green" @@ -84,9 +82,8 @@ resolution settings. The VS11 supports a similar set of modes as the VS12, but with higher refresh rates. .Bl -column "Switches" "Resolution" "Refresh" -.It Li Switches Ta Resolution Ta Refresh Ta Description -.It Li "1 2 3 4" Ta "" Ta "Rate" -.It " " +.It Sy Switches Ta Sy Resolution Ta Sy Refresh Ta Sy Description +.It Sy "1 2 3 4" Ta "" Ta Sy "Rate" Ta "" .It Li "D D D D" Ta 640x480 Ta 60Hz Ta "Standard VGA, negative separate sync" .It Li "U D D D" Ta 800x600 Ta 72Hz Ta "VESA, negative separate sync" .It Li "D U D D" Ta 1024x768 Ta 60Hz Ta "VESA, negative separate sync" diff --git a/share/man/man4/man4.sparc64/zx.4 b/share/man/man4/man4.sparc64/zx.4 index 5843e62f4e4..d40ddd2f755 100644 --- a/share/man/man4/man4.sparc64/zx.4 +++ b/share/man/man4/man4.sparc64/zx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: zx.4,v 1.12 2008/03/31 08:12:22 jmc Exp $ +.\" $OpenBSD: zx.4,v 1.13 2011/09/03 22:59:07 jmc Exp $ .\" Copyright (c) 2003 Miodrag Vallat. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -22,7 +22,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: March 31 2008 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ZX 4 sparc64 .Os .Sh NAME @@ -51,9 +51,8 @@ but makes its functions available via the internal interface. .Sh DISPLAY RESOLUTION The following resolutions are supported by the ZX frame buffer: -.Bl -column "Resolution" "Refresh Rate" -.It Li Resolution Ta "Refresh Rate" -.It " " +.Bl -column "Resolution" "Refresh Rate" "Details" -offset indent +.It Sy Resolution Ta Sy "Refresh Rate" Ta Sy "Details" .It Li 1280x1024 Ta 76 Hz Ta Non-interlaced .It Li 1280x1024 Ta 67 Hz Ta Non-interlaced .It Li 1152x900 Ta 76 Hz Ta Non-interlaced @@ -61,10 +60,8 @@ The following resolutions are supported by the ZX frame buffer: .It Li 1024x768 Ta 76 Hz Ta Non-interlaced .It Li 1024x768 Ta 60 Hz Ta Non-interlaced .\" Is it worth documenting the Stereo and TV modes? -.It Li 960x680 Ta 112 Hz Ta "Stereo, non-interlaced" -.It Li "" Ta "" Ta "56 Hz field rate per eye" -.It Li 960x680 Ta 108 Hz Ta "Stereo, non-interlaced" -.It Li "" Ta "" Ta "54 Hz field rate per eye" +.It Li 960x680 Ta 112 Hz Ta "Stereo, non-interlaced 56 Hz field rate per eye" +.It Li 960x680 Ta 108 Hz Ta "Stereo, non-interlaced 54 Hz field rate per eye" .It Li 770x575 Ta 50 Hz Ta "Interlaced - PAL" .It Li 640x480 Ta 59.94 Hz Ta "Interlaced - NTSC" .El @@ -77,17 +74,16 @@ If the frame buffer is not connected to a monitor, the default resolution of 1152x900, with a 66 Hz refresh rate, will be selected. The selected resolutions are: .Bl -column "sense code" "Resolution" "Refresh" "Monitor" -.It Li Monitor Ta Resolution Ta Refresh Ta Monitor -.It Li "sense code" Ta "" Ta Rate Ta Type -.It " " -.It Li 0 Ta 1024x768 Ta "76 Hz" Ta X449A -.It Li 1 Ta 1152x900 Ta "66 Hz" -.It Li 2 Ta 1280x1024 Ta "76 Hz" Ta X248A, GDM-205S -.It Li 3 Ta 1152x900 Ta "66 Hz" Ta GDM-1955A15, GDM-1604A15, CPD-1790 -.It Li 4 Ta 1280x1024 Ta "67 Hz" Ta GDM-20D10, GDM-1962 -.It Li 5 Ta 1152x900 Ta "66 Hz" -.It Li 6 Ta 1152x900 Ta "76 Hz" Ta GDM-1662B, 17SMM4 -.It Li 7 Ta 1152x900 Ta "66 Hz" +.It Sy Monitor Ta Sy Resolution Ta Sy Refresh Ta Sy Monitor +.It Sy "sense code" Ta "" Ta Sy Rate Ta Sy Type +.It Li 0 Ta 1024x768 Ta "76 Hz" Ta "X449A" +.It Li 1 Ta 1152x900 Ta "66 Hz" Ta "" +.It Li 2 Ta 1280x1024 Ta "76 Hz" Ta "X248A, GDM-205S" +.It Li 3 Ta 1152x900 Ta "66 Hz" Ta "GDM-1955A15, GDM-1604A15, CPD-1790" +.It Li 4 Ta 1280x1024 Ta "67 Hz" Ta "GDM-20D10, GDM-1962" +.It Li 5 Ta 1152x900 Ta "66 Hz" Ta "" +.It Li 6 Ta 1152x900 Ta "76 Hz" Ta "GDM-1662B, 17SMM4" +.It Li 7 Ta 1152x900 Ta "66 Hz" Ta "" .El .Sh SEE ALSO .Xr intro 4 , diff --git a/share/man/man4/man4.vax/rx.4 b/share/man/man4/man4.vax/rx.4 index 86d5c2aeefa..aed3cbb60ff 100644 --- a/share/man/man4/man4.vax/rx.4 +++ b/share/man/man4/man4.vax/rx.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rx.4,v 1.13 2010/01/05 19:26:26 jmc Exp $ +.\" $OpenBSD: rx.4,v 1.14 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: rx.4,v 1.3 1996/03/03 17:14:03 thorpej Exp $ .\" .\" Copyright (c) 1983, 1991 Regents of the University of California. @@ -30,7 +30,7 @@ .\" .\" from: @(#)rx.4 6.2 (Berkeley) 3/27/91 .\" -.Dd $Mdocdate: January 5 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt RX 4 vax .Os .Sh NAME @@ -79,12 +79,12 @@ operating system .Tn RT-11 . .Pp The minor device number is interpreted as follows: -.Bl -column Otherx -offset indent -.It Sy Bit Description -.It 0 Sector interleaving (1 disables interleaving) -.It 1 Logical sector\~1 is on track\~1 (0\~no, 1\~yes) -.It 2 Not used, reserved -.It Other Drive number +.Bl -column "Other" "Description" -offset indent +.It Sy Bit Ta Sy Description +.It 0 Ta "Sector interleaving (1 disables interleaving)" +.It 1 Ta "Logical sector 1 is on track 1 (0 no, 1 yes)" +.It 2 Ta "Not used, reserved" +.It Other Ta "Drive number" .El .Pp The two drives in a single diff --git a/share/man/man4/ne.4 b/share/man/man4/ne.4 index fde311220f8..d7e5d78d362 100644 --- a/share/man/man4/ne.4 +++ b/share/man/man4/ne.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ne.4,v 1.34 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: ne.4,v 1.35 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: ne.4,v 1.4 1998/02/22 05:21:20 enami Exp $ .\" .\" Copyright (c) 1997 The NetBSD Foundation, Inc. @@ -29,7 +29,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt NE 4 .Os .Sh NAME @@ -51,8 +51,8 @@ The .Nm device driver supports NE2000 and compatible (including NE1000) Ethernet cards, including: -.Bl -column "Name " "Bus" -.It Em "Name " Ta Em "Bus" +.Bl -column "Linksys Trust Combo EthernetCard, EtherFast 10/100" "PCMCIA" +.It Em "Name" Ta Em "Bus" .It Li "Accton EN2212, EN2216" Ta PCMCIA .It Li "Addtron W89C926 Ethernet" Ta PCMCIA .It Li "Allied Telesis LA-PCM" Ta PCMCIA diff --git a/share/man/man4/pgt.4 b/share/man/man4/pgt.4 index 94135eb36b9..de3b3217d6c 100644 --- a/share/man/man4/pgt.4 +++ b/share/man/man4/pgt.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: pgt.4,v 1.35 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: pgt.4,v 1.36 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2006 Theo de Raadt. .\" Copyright (c) 2006 The DragonFly Project. All rights reserved. @@ -30,7 +30,7 @@ .\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt PGT 4 .Os .Sh NAME @@ -124,22 +124,22 @@ http://firmware.openbsd.org/firmware/pgt-firmware-1.2.tgz The following cards are among those supported by the .Nm driver: -.Bl -column "SMC EZ Connect g 2.4GHz SMC2835W-v2" "ISL38xx" "CardBus" -offset 6n -.It Em "Card Chip Bus" -.It 3COM 3CRWE154G72 ISL3880 CardBus -.It D-Link DWL-g650 A1 ISL3890 PCI -.It I-O Data WN-G54/CB ISL3890 PCI -.It I4 Z-Com XG-600 ISL3890 PCI -.It I4 Z-Com XG-900 ISL3890 PCI -.It Intersil PRISM Indigo ISL3877 PCI -.It Intersil PRISM Duette ISL3890 PCI -.It NETGEAR WG511 (Taiwanese, not Chinese) ISL3890 CardBus -.It PLANEX GW-DS54G ISL3890 PCI -.It SMC EZ Connect g 2.4GHz SMC2802W ISL3890 PCI -.It SMC EZ Connect g 2.4GHz SMC2835W-v2 ISL3890 CardBus -.It SMC 2802Wv2 ISL3890 PCI -.It Soyo Aerielink ISL3890 CardBus -.It ZyXEL ZyAIR G-100 ISL3890 CardBus +.Bl -column "NETGEAR WG511 (Taiwanese, not Chinese)" "ISL3880" "CardBus" -offset 6n +.It Em Card Ta Em Chip Ta Em Bus +.It "3COM 3CRWE154G72" Ta ISL3880 Ta CardBus +.It "D-Link DWL-g650 A1" Ta ISL3890 Ta PCI +.It "I-O Data WN-G54/CB" Ta ISL3890 Ta PCI +.It "I4 Z-Com XG-600" Ta ISL3890 Ta PCI +.It "I4 Z-Com XG-900" Ta ISL3890 Ta PCI +.It "Intersil PRISM Indigo" Ta ISL3877 Ta PCI +.It "Intersil PRISM Duette" Ta ISL3890 Ta PCI +.It "NETGEAR WG511 (Taiwanese, not Chinese)" Ta ISL3890 Ta CardBus +.It "PLANEX GW-DS54G" Ta ISL3890 Ta PCI +.It "SMC EZ Connect g 2.4GHz SMC2802W" Ta ISL3890 Ta PCI +.It "SMC EZ Connect g 2.4GHz SMC2835W-v2" Ta ISL3890 Ta CardBus +.It "SMC 2802Wv2" Ta ISL3890 Ta PCI +.It "Soyo Aerielink" Ta ISL3890 Ta CardBus +.It "ZyXEL ZyAIR G-100" Ta ISL3890 Ta CardBus .El .Sh EXAMPLES The following diff --git a/share/man/man4/rtw.4 b/share/man/man4/rtw.4 index 3b7442a7151..bfd994ec52a 100644 --- a/share/man/man4/rtw.4 +++ b/share/man/man4/rtw.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rtw.4,v 1.38 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: rtw.4,v 1.39 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2004 Jonathan Gray <jsg@openbsd.org> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt RTW 4 .Os .Sh NAME @@ -79,8 +79,8 @@ or on boot with .Xr hostname.if 5 . .Sh HARDWARE The following adapters should work: -.Bl -column "Card " "Radio " "Bus" -offset 6n -.It Em "Card Radio Bus" +.Bl -column "GigaFast WF721-AEX (R* serial)" "GRF5101" "Cardbus" -offset 6n +.It Em Card Ta Em Radio Ta Em Bus .\".It Li "Acer Aspire 1357 LMi" Ta SA2400 Ta Mini PCI .It Li "Allnet ALL0182" Ta SA2400 Ta CardBus .\".It Li "Belkin F5D6001 V3" Ta SA2400 Ta PCI diff --git a/share/man/man4/speaker.4 b/share/man/man4/speaker.4 index 057e90a7519..9a29d8b16d5 100644 --- a/share/man/man4/speaker.4 +++ b/share/man/man4/speaker.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: speaker.4,v 1.5 2010/01/03 14:31:01 schwarze Exp $ +.\" $OpenBSD: speaker.4,v 1.6 2011/09/03 22:59:08 jmc Exp $ .\" $NetBSD: speaker.4,v 1.9 1998/08/18 08:16:56 augustss Exp $ .\" .\" Copyright (c) 1993 Christopher G. Demetriou @@ -29,7 +29,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: January 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt SPEAKER 4 .Os .Sh NAME @@ -174,24 +174,24 @@ May also be written .It T Aq Ar n Sets the number of quarter notes per minute; default is 120. Musical names for common tempi are: -.Bl -column Description Tempo BPM -offset indent -.It Em Tempo Beats per Minute -.It very slow Larghissimo -.It Largo 40-60 -.It Larghetto 60-66 -.It Grave -.It Lento -.It Adagio 66-76 -.It slow Adagietto -.It Andante 76-108 -.It medium Andantino -.It Moderato 108-120 -.It fast Allegretto -.It Allegro 120-168 -.It Vivace -.It Veloce -.It Presto 168-208 -.It very fast Prestissimo +.Bl -column "Description" "Larghissimo" "Beats per minute" -offset indent +.It Em "Description" Ta Em "Tempo" Ta Em "Beats per Minute" +.It "very slow" Ta Larghissimo Ta 40\(en60 +.It "very slow" Ta Largo Ta 40\(en60 +.It "very slow" Ta Larghetto Ta 60\(en66 +.It "very slow" Ta Grave Ta 60\(en66 +.It "very slow" Ta Lento Ta 60\(en66 +.It "slow" Ta Adagio Ta 66\(en76 +.It "slow" Ta Adagietto Ta 66\(en76 +.It "medium" Ta Andante Ta 76\(en108 +.It "medium" Ta Andantino Ta 76\(en108 +.It "fast" Ta Moderato Ta 108\(en120 +.It "fast" Ta Allegretto Ta 108\(en120 +.It "fast" Ta Allegro Ta 120\(en168 +.It "fast" Ta Vivace Ta 120\(en168 +.It "fast" Ta Veloce Ta 120\(en168 +.It "very fast" Ta Presto Ta 168\(en208 +.It "very fast" Ta Prestissimo Ta 168\(en208 .El .It M[LNS] Set articulation. diff --git a/share/man/man4/sti.4 b/share/man/man4/sti.4 index 23275124d1f..6c593d3282e 100644 --- a/share/man/man4/sti.4 +++ b/share/man/man4/sti.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: sti.4,v 1.21 2011/08/19 00:03:54 jmc Exp $ +.\" $OpenBSD: sti.4,v 1.22 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2001 Michael Shalayeff .\" All rights reserved. @@ -24,7 +24,7 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF .\" THE POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt STI 4 .Os .Sh NAME @@ -45,8 +45,8 @@ for their 9000/300 and 9000/700 series of workstations. .Pp The following models are supported (though not all features or frame buffer depths may be available): -.Bl -column "Visualize FX10pro" "Bits" "Mem" "3D" "machines" -offset left -.It "Model" Ta "Bits" Ta "Mem" Ta "3D" Ta "Machines/Cards" +.Bl -column "Visualize FX4/FX6" "Bits" "Mem" "3D" "Machines/Cards" -offset left +.It Sy "Model" Ta Sy "Bits" Ta Sy "Mem" Ta Sy "3D" Ta Sy "Machines/Cards" .It "VRX" Ta 8 Ta "2" Ta "" Ta "HP9000/362/382" .It "EVRX" Ta "8" Ta "2" Ta "" Ta "HP9000/425e" .It "Timber" Ta "8" Ta "2" Ta "" Ta "HP9000/705/710" diff --git a/share/man/man4/uath.4 b/share/man/man4/uath.4 index 69fe707bd98..b933db72258 100644 --- a/share/man/man4/uath.4 +++ b/share/man/man4/uath.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: uath.4,v 1.23 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: uath.4,v 1.24 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2006 .\" Damien Bergamini <damien.bergamini@free.fr> @@ -15,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt UATH 4 .Os .Sh NAME @@ -94,7 +94,7 @@ http://firmware.openbsd.org/firmware/uath-firmware-1.0p0.tgz .Sh HARDWARE The following adapters should work: .Bl -column "TRENDware International TEW-444UB" "AR5005UX" -offset 6n -.It Em "Adapter Chipset" +.It Em Adapter Ta Em Chipset .\".It Belkin F6D3050 AR5005UX .It Li "Compex WLU108AG" Ta AR5005UX .It Li "Compex WLU108G" Ta AR5005UG diff --git a/share/man/man4/ueagle.4 b/share/man/man4/ueagle.4 index 78a81aa8050..8d676b2d464 100644 --- a/share/man/man4/ueagle.4 +++ b/share/man/man4/ueagle.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ueagle.4,v 1.14 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: ueagle.4,v 1.15 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2003-2005 .\" Damien Bergamini <damien.bergamini@free.fr> @@ -15,7 +15,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt UEAGLE 4 .Os .Sh NAME @@ -88,28 +88,28 @@ See also below. .Sh HARDWARE The following modems should work: -.Bl -column "Modem " "Chip" -offset 6n -.It Em "Modem " Ta Em "Chip" -.It Li "Aethra Starmodem" Ta Eagle II -.It Li "Allied Telesyn AT-AR215" Ta Eagle I -.It Li "Arescom NDS1060" Ta Eagle II -.It Li "Aztech 206U" Ta Eagle II -.It Li "Comtrend CT-350" Ta Eagle I -.It Li "Comtrend CT-361" Ta Eagle I -.It Li "D-Link DSL-200I" Ta Eagle I -.It Li "ECI B-FOCuS USB 150" Ta Eagle II -.It Li "Elcon 111U" Ta Eagle II -.It Li "Elcon 131U" Ta Eagle II -.It Li "ELSA MicroLink ADSL FUN USB" Ta Eagle I -.It Li "Huawei SmartAX MT810" Ta Eagle II -.It Li "Sagem F@st 800" Ta Eagle I -.It Li "Sagem F@st 800 PE/E2" Ta Eagle II -.It Li "Sagem F@st 800 E3" Ta Eagle III -.It Li "Sagem F@st 908" Ta Eagle I -.It Li "Teledat 300 USB" Ta Eagle I -.It Li "Telindus ND 220" Ta Eagle II -.It Li "Telindus ND 220b" Ta Eagle II -.It Li "US Robotics USR9000/2/3" Ta Eagle I +.Bl -column "ELSA MicroLink ADSL FUN USB" "Chip" -offset 6n +.It Em "Modem" Ta Em "Chip" +.It Li "Aethra Starmodem" Ta "Eagle II" +.It Li "Allied Telesyn AT-AR215" Ta "Eagle I" +.It Li "Arescom NDS1060" Ta "Eagle II" +.It Li "Aztech 206U" Ta "Eagle II" +.It Li "Comtrend CT-350" Ta "Eagle I" +.It Li "Comtrend CT-361" Ta "Eagle I" +.It Li "D-Link DSL-200I" Ta "Eagle I" +.It Li "ECI B-FOCuS USB 150" Ta "Eagle II" +.It Li "Elcon 111U" Ta "Eagle II" +.It Li "Elcon 131U" Ta "Eagle II" +.It Li "ELSA MicroLink ADSL FUN USB" Ta "Eagle I" +.It Li "Huawei SmartAX MT810" Ta "Eagle II" +.It Li "Sagem F@st 800" Ta "Eagle I" +.It Li "Sagem F@st 800 PE/E2" Ta "Eagle II" +.It Li "Sagem F@st 800 E3" Ta "Eagle III" +.It Li "Sagem F@st 908" Ta "Eagle I" +.It Li "Teledat 300 USB" Ta "Eagle I" +.It Li "Telindus ND 220" Ta "Eagle II" +.It Li "Telindus ND 220b" Ta "Eagle II" +.It Li "US Robotics USR9000/2/3" Ta "Eagle I" .El .Sh FILES The adapter needs some firmware files, which are loaded on demand: diff --git a/share/man/man4/ulpt.4 b/share/man/man4/ulpt.4 index c781e8e11fc..00cf215cbd3 100644 --- a/share/man/man4/ulpt.4 +++ b/share/man/man4/ulpt.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ulpt.4,v 1.9 2010/02/18 13:00:19 schwarze Exp $ +.\" $OpenBSD: ulpt.4,v 1.10 2011/09/03 22:59:08 jmc Exp $ .\" $NetBSD: ulpt.4,v 1.4 1999/08/23 12:32:19 augustss Exp $ .\" .\" Copyright (c) 1999 The NetBSD Foundation, Inc. @@ -28,7 +28,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: February 18 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt ULPT 4 .Os .Sh NAME @@ -43,8 +43,8 @@ driver provides support for USB printers that follow the printer bi- or uni-directional protocol. The bits in the minor number select various features of the driver. .Bl -column "Minor Bit" "Functionxxxxxxxxxxxxxxxxxxxxxxxxxxxx" -offset indent -.It Em "Minor Bit" Function -.It 64 \&Do not initialize the device on the port. +.It Em "Minor Bit" Ta Em Function +.It 64 Ta "Do not initialize the device on the port." .El .Sh FILES .Bl -tag -width Pa diff --git a/share/man/man4/umsm.4 b/share/man/man4/umsm.4 index 2a882cb648a..f2216ee42b2 100644 --- a/share/man/man4/umsm.4 +++ b/share/man/man4/umsm.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: umsm.4,v 1.71 2011/08/19 19:59:51 jmc Exp $ +.\" $OpenBSD: umsm.4,v 1.72 2011/09/03 22:59:08 jmc Exp $ .\" .\" Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org> .\" @@ -14,7 +14,7 @@ .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" -.Dd $Mdocdate: August 19 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt UMSM 4 .Os .Sh NAME @@ -34,109 +34,109 @@ USB controller with the actual device attached to it. The following devices are known to work with the .Nm driver: -.Bl -column "Device " "Bus" -offset 6n -.It Em Device Ta Ta Em Bus -.It Li "AirPrime PC5220" Ta Ta CardBus -.It Li "Alcatel One Touch X060" Ta Ta USB -.It Li "Alcatel One Touch X200" Ta Ta USB -.It Li "AnyDATA ADU-500A" Ta Ta USB -.It Li "AnyDATA ADU-E100H" Ta Ta USB -.It Li "AnyDATA A2502" Ta Ta USB -.It Li "C-motech CNU 680" Ta Ta USB -.It Li "Emobile D01HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile D02HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile D12HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile D22HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile D31HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile H12HW (Huawei OEM)" Ta Ta USB -.It Li "Emobile D21LC (longcheer OEM)" Ta Ta USB -.It Li "Huawei Mobile E156G" Ta Ta USB -.It Li "Huawei Mobile E160E" Ta Ta USB -.It Li "Huawei Mobile E161" Ta Ta USB -.It Li "Huawei Mobile E160g" Ta Ta USB -.It Li "Huawei Mobile E1692" Ta Ta USB -.It Li "Huawei Mobile E172" Ta Ta USB -.It Li "Huawei Mobile E180" Ta Ta USB -.It Li "Huawei Mobile E181" Ta Ta USB -.It Li "Huawei Mobile E182" Ta Ta USB -.It Li "Huawei Mobile E220" Ta Ta USB -.It Li "Huawei Mobile E510" Ta Ta USB -.It Li "Huawei Mobile E1750" Ta Ta USB -.It Li "Huawei Mobile E1752" Ta Ta USB -.It Li "Huawei Mobile Connect E169g" Ta Ta USB -.It Li "Huawei Mobile Connect E618" Ta Ta USB -.It Li "Huawei Mobile Connect E620" Ta Ta USB -.It Li "IIJMobile 120FU (ZTE OEM)" Ta Ta USB -.It Li "Kyocera KPC650" Ta Ta CardBus -.It Li "Novatel Wireless ES620" Ta Ta USB -.It Li "Novatel Wireless Ovation U727" Ta Ta USB -.It Li "Novatel Wireless U760" Ta Ta USB -.It Li "NTT DoCoMo A2502" Ta Ta USB -.It Li "ONDA Communication H600" Ta Ta CardBus -.It Li "ONDA Communication MSA110UP" Ta Ta USB -.It Li "Option GlobeSurfer ICON7.2" Ta Ta USB -.It Li "Option GlobeTrotter 3G+" Ta Ta CardBus -.It Li "Option GlobeTrotter 3G Quad" Ta Ta CardBus -.It Li "Option GlobeTrotter 3G Quad Plus" Ta Ta CardBus -.It Li "Option GlobeTrotter GT Fusion" Ta Ta CardBus -.It Li "Option GlobeTrotter GT Max" Ta Ta CardBus -.It Li "Option GlobeTrotter HSDPA" Ta Ta USB -.It Li "Option GlobeTrotter HSDPA ICON225" Ta Ta USB -.It Li "Option GlobeTrotter HSUPA 380E" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8755" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8775" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8790" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless AirCard 580" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 875" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 881" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 881U" Ta Ta USB -.It Li "Sierra Wireless Inc. USB 305" Ta Ta USB -.It Li "Softbank C01SW (Sierra OEM)" Ta Ta USB -.It Li "Toshiba 3G HSDPA MiniCard" Ta Ta PCI Express Mini Card -.It Li "Vodafone Mobile Connect 3G" Ta Ta CardBus -.It Li "Vodafone Mobile Broadband K3765" Ta Ta USB -.It Li "ZTE AC2746" Ta Ta USB -.It Li "ZTE MF112" Ta Ta USB -.It Li "ZTE MF633" Ta Ta USB -.It Li "ZTE MF637" Ta Ta USB +.Bl -column "Option GlobeTrotter HSDPA ICON225" "Bus" -offset 6n +.It Em Device Ta Em Bus +.It Li "AirPrime PC5220" Ta "CardBus" +.It Li "Alcatel One Touch X060" Ta "USB" +.It Li "Alcatel One Touch X200" Ta "USB" +.It Li "AnyDATA ADU-500A" Ta "USB" +.It Li "AnyDATA ADU-E100H" Ta "USB" +.It Li "AnyDATA A2502" Ta "USB" +.It Li "C-motech CNU 680" Ta "USB" +.It Li "Emobile D01HW (Huawei OEM)" Ta "USB" +.It Li "Emobile D02HW (Huawei OEM)" Ta "USB" +.It Li "Emobile D12HW (Huawei OEM)" Ta "USB" +.It Li "Emobile D22HW (Huawei OEM)" Ta "USB" +.It Li "Emobile D31HW (Huawei OEM)" Ta "USB" +.It Li "Emobile H12HW (Huawei OEM)" Ta "USB" +.It Li "Emobile D21LC (longcheer OEM)" Ta "USB" +.It Li "Huawei Mobile E156G" Ta "USB" +.It Li "Huawei Mobile E160E" Ta "USB" +.It Li "Huawei Mobile E161" Ta "USB" +.It Li "Huawei Mobile E160g" Ta "USB" +.It Li "Huawei Mobile E1692" Ta "USB" +.It Li "Huawei Mobile E172" Ta "USB" +.It Li "Huawei Mobile E180" Ta "USB" +.It Li "Huawei Mobile E181" Ta "USB" +.It Li "Huawei Mobile E182" Ta "USB" +.It Li "Huawei Mobile E220" Ta "USB" +.It Li "Huawei Mobile E510" Ta "USB" +.It Li "Huawei Mobile E1750" Ta "USB" +.It Li "Huawei Mobile E1752" Ta "USB" +.It Li "Huawei Mobile Connect E169g" Ta "USB" +.It Li "Huawei Mobile Connect E618" Ta "USB" +.It Li "Huawei Mobile Connect E620" Ta "USB" +.It Li "IIJMobile 120FU (ZTE OEM)" Ta "USB" +.It Li "Kyocera KPC650" Ta "CardBus" +.It Li "Novatel Wireless ES620" Ta "USB" +.It Li "Novatel Wireless Ovation U727" Ta "USB" +.It Li "Novatel Wireless U760" Ta "USB" +.It Li "NTT DoCoMo A2502" Ta "USB" +.It Li "ONDA Communication H600" Ta "CardBus" +.It Li "ONDA Communication MSA110UP" Ta "USB" +.It Li "Option GlobeSurfer ICON7.2" Ta "USB" +.It Li "Option GlobeTrotter 3G+" Ta "CardBus" +.It Li "Option GlobeTrotter 3G Quad" Ta "CardBus" +.It Li "Option GlobeTrotter 3G Quad Plus" Ta "CardBus" +.It Li "Option GlobeTrotter GT Fusion" Ta "CardBus" +.It Li "Option GlobeTrotter GT Max" Ta "CardBus" +.It Li "Option GlobeTrotter HSDPA" Ta "USB" +.It Li "Option GlobeTrotter HSDPA ICON225" Ta "USB" +.It Li "Option GlobeTrotter HSUPA 380E" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8755" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8775" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8790" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless AirCard 580" Ta "CardBus" +.It Li "Sierra Wireless AirCard 875" Ta "CardBus" +.It Li "Sierra Wireless AirCard 881" Ta "CardBus" +.It Li "Sierra Wireless AirCard 881U" Ta "USB" +.It Li "Sierra Wireless Inc. USB 305" Ta "USB" +.It Li "Softbank C01SW (Sierra OEM)" Ta "USB" +.It Li "Toshiba 3G HSDPA MiniCard" Ta "PCI Express Mini Card" +.It Li "Vodafone Mobile Connect 3G" Ta "CardBus" +.It Li "Vodafone Mobile Broadband K3765" Ta "USB" +.It Li "ZTE AC2746" Ta "USB" +.It Li "ZTE MF112" Ta "USB" +.It Li "ZTE MF633" Ta "USB" +.It Li "ZTE MF637" Ta "USB" .El .Pp Devices suspected of being compatible are: -.Bl -column "Device " "Bus" -offset 6n -.It Em "Device Bus" -.It Li "Dell W5500" Ta Ta PCI Express Mini Card -.It Li "Huawei E270+" Ta Ta USB -.It Li "Huawei E1550" Ta Ta USB -.It Li "Huawei E1690" Ta Ta USB -.It Li "Huawei E1762" Ta Ta USB -.It Li "Huawei E1820" Ta Ta USB -.It Li "Novatel Wireless ExpressCard" Ta Ta ExpressCard -.It Li "Novatel Wireless Merlin V620" Ta Ta CardBus -.It Li "Novatel Wireless Merlin V740" Ta Ta CardBus -.It Li "Novatel Wireless Merlin X950D" Ta Ta ExpressCard -.It Li "Novatel Wireless MC950D" Ta Ta USB -.It Li "Novatel Wireless S720" Ta Ta CardBus -.It Li "Novatel Wireless U720" Ta Ta USB -.It Li "Novatel Wireless U740" Ta Ta CardBus -.It Li "Novatel Wireless U870" Ta Ta CardBus -.It Li "Novatel Wireless V720" Ta Ta CardBus -.It Li "Novatel Wireless X950D" Ta Ta ExpressCard -.It Li "Novatel Wireless XU870 HSDPA" Ta Ta ExpressCard -.It Li "Sierra Wireless AirCard 595" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 597E" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 880" Ta Ta CardBus -.It Li "Sierra Wireless AirCard 880E" Ta Ta ExpressCard -.It Li "Sierra Wireless AirCard 880U" Ta Ta USB -.It Li "Sierra Wireless AirCard 881E" Ta Ta ExpressCard -.It Li "Sierra Wireless AirCard 885U" Ta Ta USB -.It Li "Sierra Wireless C597" Ta Ta USB -.It Li "Sierra Wireless EM5625" Ta Ta USB -.It Li "Sierra Wireless MC5720" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC5725" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8755" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8765" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8780" Ta Ta PCI Express Mini Card -.It Li "Sierra Wireless MC8781" Ta Ta PCI Express Mini Card +.Bl -column "Option GlobeTrotter HSDPA ICON225" "Bus" -offset 6n +.It Em Device Ta Em Bus +.It Li "Dell W5500" Ta "PCI Express Mini Card" +.It Li "Huawei E270+" Ta "USB" +.It Li "Huawei E1550" Ta "USB" +.It Li "Huawei E1690" Ta "USB" +.It Li "Huawei E1762" Ta "USB" +.It Li "Huawei E1820" Ta "USB" +.It Li "Novatel Wireless ExpressCard" Ta "ExpressCard" +.It Li "Novatel Wireless Merlin V620" Ta "CardBus" +.It Li "Novatel Wireless Merlin V740" Ta "CardBus" +.It Li "Novatel Wireless Merlin X950D" Ta "ExpressCard" +.It Li "Novatel Wireless MC950D" Ta "USB" +.It Li "Novatel Wireless S720" Ta "CardBus" +.It Li "Novatel Wireless U720" Ta "USB" +.It Li "Novatel Wireless U740" Ta "CardBus" +.It Li "Novatel Wireless U870" Ta "CardBus" +.It Li "Novatel Wireless V720" Ta "CardBus" +.It Li "Novatel Wireless X950D" Ta "ExpressCard" +.It Li "Novatel Wireless XU870 HSDPA" Ta "ExpressCard" +.It Li "Sierra Wireless AirCard 595" Ta "CardBus" +.It Li "Sierra Wireless AirCard 597E" Ta "CardBus" +.It Li "Sierra Wireless AirCard 880" Ta "CardBus" +.It Li "Sierra Wireless AirCard 880E" Ta "ExpressCard" +.It Li "Sierra Wireless AirCard 880U" Ta "USB" +.It Li "Sierra Wireless AirCard 881E" Ta "ExpressCard" +.It Li "Sierra Wireless AirCard 885U" Ta "USB" +.It Li "Sierra Wireless C597" Ta "USB" +.It Li "Sierra Wireless EM5625" Ta "USB" +.It Li "Sierra Wireless MC5720" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC5725" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8755" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8765" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8780" Ta "PCI Express Mini Card" +.It Li "Sierra Wireless MC8781" Ta "PCI Express Mini Card" .El .Pp Some modems have multiple serial ports, diff --git a/share/man/man5/disktab.5 b/share/man/man5/disktab.5 index 1219b29c86d..e04682f4b41 100644 --- a/share/man/man5/disktab.5 +++ b/share/man/man5/disktab.5 @@ -1,4 +1,4 @@ -.\" $OpenBSD: disktab.5,v 1.13 2011/07/11 09:37:51 jmc Exp $ +.\" $OpenBSD: disktab.5,v 1.14 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: disktab.5,v 1.4 1994/11/30 19:31:15 jtc Exp $ .\" .\" Copyright (c) 1983, 1991, 1993 @@ -30,7 +30,7 @@ .\" .\" @(#)disktab.5 8.1 (Berkeley) 6/5/93 .\" -.Dd $Mdocdate: July 11 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt DISKTAB 5 .Os .Sh NAME @@ -59,99 +59,97 @@ characters. The last name given should be a long name fully identifying the disk. .Pp The following list indicates the normal values stored for each disk entry: -.Bl -column "indent" "boolx" -.It Sy Name Type Description -.It "\&ty str Type of disk (e.g., removable, winchester)." -.It "\&dt str Type of controller (e.g.," -.Tn SMD , ESDI , -floppy). -.It "\&ns num Number of sectors per track." -.It "\&nt num Number of tracks per cylinder." -.It "\&nc num Total number of cylinders on the disk." -.It "\&sc num Number of sectors per cylinder (default: ns*nt)." -.It "\&su num Number of sectors per unit (default: sc*nc)." -.It "\&se num Sector size in bytes (default:" +.Bl -column "d[0-4]" "bool" "Description" +.It Sy Name Ta Sy Type Ta Sy Description +.It \&ty Ta str Ta "Type of disk (e.g., removable, winchester)." +.It \&dt Ta str Ta "Type of controller (e.g.,SMD, ESDI, floppy)." +.It \&ns Ta num Ta "Number of sectors per track." +.It \&nt Ta num Ta "Number of tracks per cylinder." +.It \&nc Ta num Ta "Total number of cylinders on the disk." +.It \&sc Ta num Ta "Number of sectors per cylinder (default: ns*nt)." +.It \&su Ta num Ta "Number of sectors per unit (default: sc*nc)." +.It \&se Ta num Ta "Sector size in bytes (default:" .Dv DEV_BSIZE ) . -.It "\&sf bool Controller supports bad144-style bad sector forwarding." -.It "\&rm num Rotation speed in RPM (default: 3600)." -.It "\&sk num Sector skew per track (default: 0)." -.It "\&cs num Sector skew per cylinder (default: 0)." -.It "\&hs num Headswitch time in usec (default: 0)." -.It "\&ts num One-cylinder seek time in usec (default: 0)." -.It "\&il num Sector interleave (n:1) (default: 1)." -.It "\&d[0-4] num Drive-type-dependent parameters." -.It "\&b0 str Pathname to primary bootstrap." -.It "\&b1 str Pathname to secondary bootstrap." -.It "\&bs num Boot block size (default:" +.It \&sf Ta bool Ta "Controller supports bad144-style bad sector forwarding." +.It \&rm Ta num Ta "Rotation speed in RPM (default: 3600)." +.It \&sk Ta num Ta "Sector skew per track (default: 0)." +.It \&cs Ta num Ta "Sector skew per cylinder (default: 0)." +.It \&hs Ta num Ta "Headswitch time in usec (default: 0)." +.It \&ts Ta num Ta "One-cylinder seek time in usec (default: 0)." +.It \&il Ta num Ta "Sector interleave (n:1) (default: 1)." +.It \&d[0-4] Ta num Ta "Drive-type-dependent parameters." +.It \&b0 Ta str Ta "Pathname to primary bootstrap." +.It \&b1 Ta str Ta "Pathname to secondary bootstrap." +.It \&bs Ta num Ta "Boot block size (default:" .Dv BBSIZE ) . -.It "\&sb num Superblock size (default: " +.It \&sb Ta num Ta "Superblock size (default: " .Dv SBSIZE ) . .Pp -.It "\&ba num Block size for partition" +.It \&ba Ta num Ta "Block size for partition" .Dq a (bytes). -.It "\&bd num Block size for partition" +.It \&bd Ta num Ta "Block size for partition" .Dq d (bytes). -.It "\&be num Block size for partition" +.It \&be Ta num Ta "Block size for partition" .Dq e (bytes). -.It [...] -.It "\&bp num Block size for partition" +.It [...] Ta "" Ta "" +.It \&bp Ta num Ta "Block size for partition" .Dq p (bytes). .Pp -.It "\&fa num Fragment size for partition" +.It \&fa Ta num Ta "Fragment size for partition" .Dq a (bytes). -.It "\&fd num Fragment size for partition" +.It \&fd Ta num Ta "Fragment size for partition" .Dq d (bytes). -.It "\&fe num Fragment size for partition" +.It \&fe Ta num Ta "Fragment size for partition" .Dq e (bytes). -.It [...] -.It "\&fp num Fragment size for partition" +.It [...] Ta "" Ta "" +.It \&fp Ta num Ta "Fragment size for partition" .Dq p (bytes). .Pp -.It "\&oa num Offset of partition" +.It \&oa Ta num Ta "Offset of partition" .Dq a (sectors). -.It "\&ob num Offset of partition" +.It \&ob Ta num Ta "Offset of partition" .Dq b (sectors). -.It "\&oc num Offset of partition" +.It \&oc Ta num Ta "Offset of partition" .Dq c (sectors). -.It [...] -.It "\&op num Offset of partition" +.It [...] Ta "" Ta "" +.It \&op Ta num Ta "Offset of partition" .Dq p (sectors). .Pp -.It "\&pa num Size of partition" +.It \&pa Ta num Ta "Size of partition" .Dq a (sectors). -.It "\&pb num Size of partition" +.It \&pb Ta num Ta "Size of partition" .Dq b (sectors). -.It "\&pc num Size of partition" +.It \&pc Ta num Ta "Size of partition" .Dq c (sectors). -.It [...] -.It "\&pp num Size of partition" +.It [...] Ta "" Ta "" +.It \&pp Ta num Ta "Size of partition" .Dq p (sectors). .Pp -.It "\&ta str Type of partition" +.It \&ta Ta str Ta "Type of partition" .Dq a (4.2BSD, swap, etc.). -.It "\&tb str Type of partition" +.It \&tb Ta str Ta "Type of partition" .Dq b . -.It "\&tc str Type of partition" +.It \&tc Ta str Ta "Type of partition" .Dq c . -.It [...] -.It "\&tp str Type of partition" +.It [...] Ta "" Ta "" +.It \&tp Ta str Ta "Type of partition" .Dq p . .El .Sh FILES diff --git a/share/man/man5/login.conf.5 b/share/man/man5/login.conf.5 index 7d33037e2be..4a1f8a64988 100644 --- a/share/man/man5/login.conf.5 +++ b/share/man/man5/login.conf.5 @@ -30,10 +30,10 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $OpenBSD: login.conf.5,v 1.47 2011/04/17 06:34:31 jmc Exp $ +.\" $OpenBSD: login.conf.5,v 1.48 2011/09/03 22:59:07 jmc Exp $ .\" BSDI $From: login.conf.5,v 2.20 2000/06/26 14:50:38 prb Exp $ .\" -.Dd $Mdocdate: April 17 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt LOGIN.CONF 5 .Os .Sh NAME @@ -94,8 +94,8 @@ file are either boolean or use a .Ql = to separate the capability from the value. The types are described after the capability table. -.Bl -column minpasswordlen program xetcxmotd -.It Sy Name Type Default Description +.Bl -column "approve-service" "program" "blowfish,6" "Description" +.It Sy Name Ta Sy Type Ta Sy Default Ta Sy Description .\" .It approve Ta program Ta "" Ta Default program to approve login. diff --git a/share/man/man5/printcap.5 b/share/man/man5/printcap.5 index 3af4d4bf459..b3f14aef52f 100644 --- a/share/man/man5/printcap.5 +++ b/share/man/man5/printcap.5 @@ -1,4 +1,4 @@ -.\" $OpenBSD: printcap.5,v 1.22 2010/01/03 14:31:01 schwarze Exp $ +.\" $OpenBSD: printcap.5,v 1.23 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: printcap.5,v 1.7 1998/02/20 12:24:50 hubertf Exp $ .\" .\" Copyright (c) 1983, 1991, 1993 @@ -30,7 +30,7 @@ .\" .\" @(#)printcap.5 8.2 (Berkeley) 12/11/93 .\" -.Dd $Mdocdate: January 3 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt PRINTCAP 5 .Os .Sh NAME @@ -68,64 +68,60 @@ for a complete discussion on how to set up the database for a given printer. Refer to .Xr termcap 5 for a description of the file layout. -.Bl -column "xx" "xx" "/var/spool/" -.It Sy Name Type Default Description -.It "af str" Ta Dv NULL Ta No "name of accounting file" -.It "br num none if lp is a tty, set baud rate" +.Bl -column "Name" "Type" "/var/spool/output" "Description" +.It Sy Name Ta Sy Type Ta Sy Default Ta Sy Description +.It "af str" Ta Dv NULL Ta "name of accounting file" +.It "br" Ta "num" Ta "none" Ta "if lp is a tty, set baud rate" .Pf ( Xr ioctl 2 call) -.It "cf str" Ta Dv NULL Ta No "cifplot data filter" -.It "df str" Ta Dv NULL Ta No "tex data filter" -.Pf ( Tn DVI -format) -.It "fc num 0 if lp is a tty, clear flag bits" +.It "cf" Ta "str" Ta Dv NULL Ta "cifplot data filter" +.It "df" Ta "str" Ta Dv NULL Ta "tex data filter (DVI format)" +.It "fc" Ta "num" Ta "0" Ta "if lp is a tty, clear flag bits" .Pq Aq Pa sgtty.h -.It "ff str" Ta So Li \ef Sc Ta No "string to send for a form feed" -.It "fo bool false print a form feed when device is opened" -.It "fs num 0 if lp is a tty, set flag bits" +.It "ff" Ta "str" Ta So Li \ef Sc Ta "string to send for a form feed" +.It "fo" Ta "bool" Ta "false" Ta "print a form feed when device is opened" +.It "fs" Ta "num" Ta "0" Ta "if lp is a tty, set flag bits" .Pq Aq Pa sgtty.h -.It "gf str" Ta Dv NULL Ta No "graph data filter" +.It "gf" Ta "str" Ta Dv NULL Ta "graph data filter" .Pf ( Xr plot 3 format) -.It "hl bool false print the burst header page last" -.It "ic bool false supports non-standard ioctl to indent printout" -.It "if str" Ta Dv NULL Ta No "name of text filter which does accounting" -.It "lf str" Ta Pa /dev/console Ta No "error logging file name" -.It "lo str" Ta Pa lock Ta No "name of lock file" -.It "lp str" Ta Pa /dev/lp Ta No "local printer device, or port@host for remote" -.It "mc num 0 maximum number of copies allowed; 0=unlimited" -.It "ms str" Ta Dv NULL Ta No "list of terminal modes to set or clear" -.It "mx num 0 max file size (in" +.It "hl" Ta "bool" Ta "false" Ta "print the burst header page last" +.It "ic" Ta "bool" Ta "false" Ta "supports non-standard ioctl to indent printout" +.It "if" Ta "str" Ta Dv NULL Ta "name of text filter which does accounting" +.It "lf" Ta "str" Ta Pa /dev/console Ta "error logging file name" +.It "lo" Ta "str" Ta Pa lock Ta "name of lock file" +.It "lp" Ta "str" Ta Pa /dev/lp Ta "local printer device, or port@host for remote" +.It "mc" Ta "num" Ta "0" Ta "maximum number of copies allowed; 0=unlimited" +.It "ms" Ta "str" Ta Dv NULL Ta "list of terminal modes to set or clear" +.It "mx" Ta "num" Ta "0" Ta "max file size (in" .Dv BUFSIZ blocks); 0=unlimited -.It "nd str" Ta Dv NULL Ta No "next directory for queues list (unimplemented)" -.It "nf str" Ta Dv NULL Ta No "ditroff data filter (device independent troff)" -.It "of str" Ta Dv NULL Ta No "name of output filtering program" -.It "pc num 200 price per foot or page in hundredths of cents" -.It "pl num 66 page length (in lines)" -.It "pw num 132 page width (in characters)" -.It "px num 0 page width in pixels (horizontal)" -.It "py num 0 page length in pixels (vertical)" -.It "rf str" Ta Dv NULL Ta No "filter for printing" -.Tn FORTRAN -style text files -.It "rg str" Ta Dv NULL Ta No "restricted group-only group members can access" -.It "rm str" Ta Dv NULL Ta No "machine name for remote printer" -.It "rp str ``lp'' remote printer name argument" -.It "rs bool false remote users must have a local account" -.It "rw bool false open printer device for reading and writing" -.It "sb bool false short banner (one line only)" -.It "sc bool false suppress multiple copies" -.It "sd str" Ta Pa /var/spool/output Ta No "spool directory" -.It "sf bool false suppress form feeds" -.It "sh bool false suppress printing of burst page header" -.It "st str" Ta Pa status Ta No "status file name" -.It "tf str" Ta Dv NULL Ta No "troff data filter (cat phototypesetter)" -.It "tr str" Ta Dv NULL Ta No "trailer string to print when queue empties" -.It "vf str" Ta Dv NULL Ta No "raster image filter" -.It "xc num 0 if lp is a tty, clear local mode bits" +.It "nd" Ta "str" Ta Dv NULL Ta "next directory for queues list (unimplemented)" +.It "nf" Ta "str" Ta Dv NULL Ta "ditroff data filter (device independent troff)" +.It "of" Ta "str" Ta Dv NULL Ta "name of output filtering program" +.It "pc" Ta "num" Ta "200" Ta "price per foot or page in hundredths of cents" +.It "pl" Ta "num" Ta "66" Ta "page length (in lines)" +.It "pw" Ta "num" Ta "132" Ta "page width (in characters)" +.It "px" Ta "num" Ta "0" Ta "page width in pixels (horizontal)" +.It "py" Ta "num" Ta "0" Ta "page length in pixels (vertical)" +.It "rf" Ta "str" Ta Dv NULL Ta "filter for printing FORTRAN style text files" +.It "rg" Ta "str" Ta Dv NULL Ta "restricted group-only group members can access" +.It "rm" Ta "str" Ta Dv NULL Ta "machine name for remote printer" +.It "rp" Ta "str" Ta "``lp''" Ta "remote printer name argument" +.It "rs" Ta "bool" Ta "false" Ta "remote users must have a local account" +.It "rw" Ta "bool" Ta "false" Ta "open printer device for reading and writing" +.It "sb" Ta "bool" Ta "false" Ta "short banner (one line only)" +.It "sc" Ta "bool" Ta "false" Ta "suppress multiple copies" +.It "sd" Ta "str" Ta Pa /var/spool/output Ta "spool directory" +.It "sf" Ta "bool" Ta "false" Ta "suppress form feeds" +.It "sh" Ta "bool" Ta "false" Ta "suppress printing of burst page header" +.It "st" Ta "str" Ta Pa status Ta "status file name" +.It "tf" Ta "str" Ta Dv NULL Ta "troff data filter (cat phototypesetter)" +.It "tr" Ta "str" Ta Dv NULL Ta "trailer string to print when queue empties" +.It "vf" Ta "str" Ta Dv NULL Ta "raster image filter" +.It "xc" Ta "num" Ta "0" Ta "if lp is a tty, clear local mode bits" .Pq Xr tty 4 -.It "xs num 0 if lp is a tty, set local mode bits" +.It "xs" Ta "num" Ta "0" Ta "if lp is a tty, set local mode bits" .Pq Xr tty 4 .El .Pp diff --git a/share/man/man7/operator.7 b/share/man/man7/operator.7 index c85302184a7..6426ef1fb18 100644 --- a/share/man/man7/operator.7 +++ b/share/man/man7/operator.7 @@ -1,4 +1,4 @@ -.\" $OpenBSD: operator.7,v 1.8 2010/09/05 19:12:36 schwarze Exp $ +.\" $OpenBSD: operator.7,v 1.9 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: operator.7,v 1.3 1994/11/30 19:07:26 jtc Exp $ .\" .\" Copyright (c) 1989, 1990, 1993 @@ -30,7 +30,7 @@ .\" .\" @(#)operator.7 8.1 (Berkeley) 6/9/93 .\" -.Dd $Mdocdate: September 5 2010 $ +.Dd $Mdocdate: September 3 2011 $ .Dt OPERATOR 7 .Os .Sh NAME @@ -38,24 +38,24 @@ .Nd C operator precedence and associativity .Sh DESCRIPTION .Bd -ragged -offset indent -.Bl -column "= += -= *= /= %= <<= >>= &= ^= |=" -.It Operator Associativity -.It -------- ------------- -.It \&() [] -> \&. left to right -.It "! ~ ++ -- - (type) * & sizeof" right to left -.It \&* / % left to right -.It \&+ - left to right -.It \&<< >> left to right -.It \&< <= > >= left to right -.It \&== != left to right -.It \&& left to right -.It \&^ left to right -.It \&| left to right -.It \&&& left to right -.It \&|| left to right -.It \&?: right to left -.It "= += -= *= /= %= <<= >>= &= ^= |= right to left" -.It \&, left to right +.Bl -column "= += -= *= /= %= <<= >>= &= ^= |=" "Associativity" +.It Sy Operator Ta Sy Associativity +.It -------- Ta ------------- +.It "\&() [] -> \&." Ta "left to right" +.It "! ~ ++ -- - (type) * & sizeof" Ta "right to left" +.It "\&* / %" Ta "left to right" +.It "\&+ -" Ta "left to right" +.It "\&<< >>" Ta "left to right" +.It "\&< <= > >=" Ta "left to right" +.It "\&== !=" Ta "left to right" +.It "\&&" Ta "left to right" +.It "\&^" Ta "left to right" +.It "\&|" Ta "left to right" +.It "\&&&" Ta "left to right" +.It "\&||" Ta "left to right" +.It "\&?:" Ta "right to left" +.It "= += -= *= /= %= <<= >>= &= ^= |=" Ta "right to left" +.It "\&," Ta "left to right" .El .Ed .Sh FILES diff --git a/share/man/man8/man8.luna88k/boot_luna88k.8 b/share/man/man8/man8.luna88k/boot_luna88k.8 index c9175b4933a..c97bc3b2501 100644 --- a/share/man/man8/man8.luna88k/boot_luna88k.8 +++ b/share/man/man8/man8.luna88k/boot_luna88k.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: boot_luna88k.8,v 1.4 2007/05/31 19:19:59 jmc Exp $ +.\" $OpenBSD: boot_luna88k.8,v 1.5 2011/09/03 22:59:07 jmc Exp $ .\" .\" Copyright (c) 2004, Miodrag Vallat. .\" All rights reserved. @@ -23,7 +23,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: May 31 2007 $ +.Dd $Mdocdate: September 3 2011 $ .Dt BOOT_LUNA88K 8 luna88k .Os .Sh NAME @@ -46,17 +46,15 @@ position, while on the Luna-88k2, a switch is enabled when in the position. .Pp The following switches alter the ROM monitor behaviour: -.Bl -column "Switch" "XXXXXXXXXXXXXXXXXXXXXXXXX" "X" -.It Li Switch Ta Enabled Ta Disabled -.It " " -.It Li 1 Ta interact with ROM monitor Ta auto-boot -.It Li 2 Ta serial console Ta graphics console +.Bl -column "Switch" "interact with ROM monitor" "Disabled" +.It Sy Switch Ta Sy Enabled Ta Sy Disabled +.It Li 1 Ta "interact with ROM monitor" Ta "auto-boot" +.It Li 2 Ta "serial console" Ta "graphics console" .El .Pp The following switches alter the kernel behaviour: -.Bl -column "Switch" "XXXXXXXXXXXXXXXXXXXXXXXXX" "X" -.It Li Switch Ta Enabled Ta Disabled -.It " " +.Bl -column "Switch" "interact with ROM monitor" "Disabled" +.It Sy Switch Ta Sy Enabled Ta Sy Disabled .It Li 1 Ta "boot in single-user mode" Ta "boot in multi-user mode" .It Li 3 Ta "prompt for root device" Ta "do not prompt for root device" .It Li 4 Ta "enter UKC mode" Ta "do not enter UKC mode" diff --git a/share/man/man9/vnsubr.9 b/share/man/man9/vnsubr.9 index 62327621a4f..97e54cd9b81 100644 --- a/share/man/man9/vnsubr.9 +++ b/share/man/man9/vnsubr.9 @@ -1,4 +1,4 @@ -.\" $OpenBSD: vnsubr.9,v 1.10 2011/07/21 07:54:33 jmc Exp $ +.\" $OpenBSD: vnsubr.9,v 1.11 2011/09/03 22:59:07 jmc Exp $ .\" $NetBSD: vnsubr.9,v 1.21 2004/05/25 14:54:56 hannken Exp $ .\" .\" Copyright (c) 2001 The NetBSD Foundation, Inc. @@ -28,7 +28,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd $Mdocdate: July 21 2011 $ +.Dd $Mdocdate: September 3 2011 $ .Dt VNSUBR 9 .Os .Sh NAME @@ -128,17 +128,18 @@ function should be used. The .Fa flags argument may contain the following flags: -.Bl -column LK_INTERLOCK -offset indent -.It Dv LK_RETRY Ta +.Pp +.Bl -tag -width LK_EXCLUSIVE -offset indent -compact +.It Dv LK_RETRY Return the vnode even if it has been reclaimed. -.It Dv LK_NOWAIT Ta -Don't wait if the vnode lock is held by someone else (may still -wait on reclamation lock). +.It Dv LK_NOWAIT +Don't wait if the vnode lock is held by someone else +(may still wait on reclamation lock). Must not be used with .Dv LK_RETRY . -.It Dv LK_EXCLUSIVE Ta +.It Dv LK_EXCLUSIVE Acquire an exclusive lock. -.It Dv LK_SHARED Ta +.It Dv LK_SHARED Acquire a shared lock. .El .Pp |