{TrendNet,Trendware} -> TRENDnet, ok jsg@

6 files changed, 12 insertions, 12 deletions

diff --git a/share/man/man4/atw.4 b/share/man/man4/atw.4
index 0a628bde034..142f90108f4 100644
--- a/share/man/man4/atw.4
+++ b/share/man/man4/atw.4
@@ -1,4 +1,4 @@
-.\"     $OpenBSD: atw.4,v 1.18 2005/06/17 02:21:58 jsg Exp $
+.\"     $OpenBSD: atw.4,v 1.19 2005/09/23 10:24:51 grunk Exp $
 .\"	$NetBSD: atw.4,v 1.8 2004/06/06 04:05:49 wiz Exp $
 .\"
 .\" Copyright (c) 2003
@@ -218,7 +218,7 @@ This includes:
 .It D-Link DWL-650 Rev. \&L1 CardBus
 .It D-Link DWL-520 Rev. \&C1 PCI
 .It LanReady WP2000 PCI
-.It TrendNet TEW-221PC CardBus
+.It TRENDnet TEW-221PC CardBus
 .It Xterasys XN2511B PCI
 .El
 .Pp
diff --git a/share/man/man4/nge.4 b/share/man/man4/nge.4
index 8f3d1243976..9b12157d401 100644
--- a/share/man/man4/nge.4
+++ b/share/man/man4/nge.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: nge.4,v 1.25 2005/08/23 16:51:55 jmc Exp $
+.\"	$OpenBSD: nge.4,v 1.26 2005/09/23 10:24:51 grunk Exp $
 .\" Copyright (c) 2001 Wind River Systems
 .\" Copyright (c) 1997, 1998, 1999, 2000, 2001
 .\"	Bill Paul <wpaul@bsdi.com>. All rights reserved.
@@ -68,7 +68,7 @@ SMC EZ Card 1000 (SMC9462TX)
 .It
 Surecom Technology EP-320G-TX
 .It
-Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)
+TRENDnet TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)
 .El
 .Pp
 All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
diff --git a/share/man/man4/rl.4 b/share/man/man4/rl.4
index 7692e18f847..6bc1aae5683 100644
--- a/share/man/man4/rl.4
+++ b/share/man/man4/rl.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: rl.4,v 1.25 2005/01/14 09:02:24 jmc Exp $
+.\"	$OpenBSD: rl.4,v 1.26 2005/09/23 10:24:51 grunk Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -78,7 +78,7 @@ OvisLink LEF-8129TX, LEF-8139TX
 .It
 SMC EZ Card 10/100 PCI 1211-TX
 .It
-TrendNet TE100-PCBUSR CardBus
+TRENDnet TE100-PCBUSR CardBus
 .El
 .Pp
 The Realtek controllers use bus master DMA but do not use a
diff --git a/share/man/man4/rtw.4 b/share/man/man4/rtw.4
index 6ac6371aeba..7c6f3d4a738 100644
--- a/share/man/man4/rtw.4
+++ b/share/man/man4/rtw.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: rtw.4,v 1.19 2005/08/30 15:20:26 grunk Exp $
+.\"	$OpenBSD: rtw.4,v 1.20 2005/09/23 10:24:51 grunk Exp $
 .\"
 .\" Copyright (c) 2004 Jonathan Gray <jsg@openbsd.org>
 .\"
@@ -196,7 +196,7 @@ The following adapters should work:
 .It Li "Ovislink AirLive WL-1120PCM" Ta CardBus
 .It Li "Planet WL-3553" Ta CardBus
 .It Li "TRENDnet TEW-226PC" Ta CardBus
-.\".It Li "TrendNET TEW-288PI" Ta PCI
+.\".It Li "TRENDnet TEW-288PI" Ta PCI
 .It Li "VCTnet PC-11B1" Ta CardBus
 .El
 .Sh EXAMPLES
diff --git a/share/man/man4/url.4 b/share/man/man4/url.4
index 36927839ac2..54fdbffad9d 100644
--- a/share/man/man4/url.4
+++ b/share/man/man4/url.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: url.4,v 1.13 2005/08/02 00:30:04 jsg Exp $
+.\"	$OpenBSD: url.4,v 1.14 2005/09/23 10:24:51 grunk Exp $
 .\"	$NetBSD: url.4,v 1.4 2002/04/02 20:45:40 augustss Exp $
 .\"
 .\" Copyright (c) 2002 The NetBSD Foundation, Inc.
@@ -68,7 +68,7 @@ driver supports the following adapters:
 .It Tn OQO model 01 (10/100) Ethernet
 .It Tn Repotec RP-USB100-A
 .It Tn SMC 2208USB/ETH
-.It Tn TrendNet TU-ET100C
+.It Tn TRENDnet TU-ET100C
 .It Tn Zt USB10/100
 .It Tn Z-TEK ZK-R02
 .El
diff --git a/share/man/man4/wb.4 b/share/man/man4/wb.4
index 99f244a3623..4cc3958c09e 100644
--- a/share/man/man4/wb.4
+++ b/share/man/man4/wb.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: wb.4,v 1.14 2004/09/30 19:59:26 mickey Exp $
+.\"	$OpenBSD: wb.4,v 1.15 2005/09/23 10:24:51 grunk Exp $
 .\"
 .\" Copyright (c) 1997, 1998
 .\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
@@ -45,7 +45,7 @@ The
 .Nm
 driver provides support for PCI Ethernet adapters and embedded
 controllers based on the Winbond W89C840F Fast Ethernet controller chip.
-This includes the Trendware TE100-PCIE and various other cheap boards.
+This includes the TRENDnet TE100-PCIE and various other cheap boards.
 The 840F should not be confused with the 940F, which is
 an NE2000 clone and only supports 10Mbps speeds.
 .Pp