Need more sleep to make correct replace commands;

pointed out by op21@squish.org, thanks

1 files changed, 156 insertions, 156 deletions

diff --git a/share/man/man4/man4.sparc64/openprom.4 b/share/man/man4/man4.sparc64/openprom.4
index e6e0bda53b3..445ee38fe63 100644
--- a/share/man/man4/man4.sparc64/openprom.4
+++ b/share/man/man4/man4.sparc64/openprom.4
@@ -1,156 +1,156 @@
-.\"	$OpenBSD: openprom.4,v 1.2 2001/10/24 21:15:32 miod Exp $g
-.\" Copyright (c) 1992, 1993g
-.\"	The Regents of the University of California.  All rights reserved.g
-.\"g
-.\" This software was developed by the Computer Systems Engineering groupg
-.\" at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 andg
-.\" contributed to Berkeley.g
-.\"g
-.\" Redistribution and use in source and binary forms, with or withoutg
-.\" modification, are permitted provided that the following conditionsg
-.\" are met:g
-.\" 1. Redistributions of source code must retain the above copyrightg
-.\"    notice, this list of conditions and the following disclaimer.g
-.\" 2. Redistributions in binary form must reproduce the above copyrightg
-.\"    notice, this list of conditions and the following disclaimer in theg
-.\"    documentation and/or other materials provided with the distribution.g
-.\" 3. All advertising materials mentioning features or use of this softwareg
-.\"    must display the following acknowledgement:g
-.\"	This product includes software developed by the University ofg
-.\"	California, Berkeley and its contributors.g
-.\" 4. Neither the name of the University nor the names of its contributorsg
-.\"    may be used to endorse or promote products derived from this softwareg
-.\"    without specific prior written permission.g
-.\"g
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' ANDg
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THEg
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEg
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLEg
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIALg
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODSg
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)g
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTg
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAYg
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OFg
-.\" SUCH DAMAGE.g
-.\"g
-.\"     from: @(#)openprom.4	8.1 (Berkeley) 6/5/93g
-.\"g
-.Dd October 5, 2001g
-.Dt OPENPROM 4 sparc64g
-.Osg
-.Sh NAMEg
-.Nm openpromg
-.Nd OPENPROM interfaceg
-.Sh SYNOPSISg
-.Fd #include <machine/openpromio.h>g
-.Sh DESCRIPTIONg
-The fileg
-.Nm /dev/openpromg
-is an interface to the ULTRAsparc OPENPROM.g
-This interface is highly stylized;g
-ioctls are used for all operations.g
-These ioctls refer tog
-.Dq nodes ,g
-which are simplyg
-.Dq magicg
-integer values describing data areas.g
-Occasionally the number 0 may be used or returned instead,g
-as described below.g
-.Ppg
-The calls that take and/or return a nodeg
-use a pointer to ang
-.Li intg
-variable for this purpose;g
-others use a pointer to ang
-.Li struct opiocdescg
-descriptor,g
-which contains a node and two counted strings.g
-The first string is comprised of the fieldsg
-.Li op_nameleng
-(ang
-.Li int )g
-andg
-.Li op_nameg
-(ag
-.Li "char *" ) ,g
-giving the name of a field.g
-The second string is comprised of the fieldsg
-.Li op_bufleng
-andg
-.Li op_buf ,g
-used analogously.g
-These two counted strings work in ag
-.Dq value-resultg
-fashion.g
-At entry to the ioctl,g
-the counts are expected to reflect the buffer size;g
-on return,g
-the counts are updated to reflect the buffer contents.g
-.Ppg
-The following ioctls are supported:g
-.Bl -tag -width OPIOCGETOPTNODEg
-.It Dv OPIOCGETOPTNODEg
-Takes nothing, and fills in the options node number.g
-.It OPIOCGETNEXTg
-Takes a node number and returns the number of the following node.g
-The node following the last node is number 0;g
-the node following number 0 is the first node.g
-.It Dv OPIOCGETCHILDg
-Takes a node number and returns the number of the firstg
-.Dq childg
-of that node.g
-This child may have siblings; these can be discovered by usingg
-.Dv OPIOCGETNEXT .g
-.It Dv OPIOCGETg
-Fills in the value of the named property for the given node.g
-If no such property is associated with that node,g
-the value length is set to -1.g
-If the named property exists but has no value,g
-the value length is set to 0.g
-.It Dv OPIOCSETg
-Writes the given value under the given name.g
-The OPENPROM may refuse this operation;g
-in this caseg
-.Dv EINVALg
-is returned.g
-.It Dv OPIOCNEXTPROPg
-Finds the property whose name follows the given nameg
-in OPENPROM internal order.g
-The resulting name is returned in the value field.g
-If the named property is the last, theg
-.Dq nextg
-name is the empty string.g
-As withg
-.Dv OPIOCGETNEXT ,g
-the next name after the empty string is the first name.g
-.Elg
-.Sh FILESg
-.Pa /dev/openpromg
-.Sh ERRORSg
-The following may result in rejection of an operation:g
-.Bl -tag -width Erg
-.It Bq Er EINVALg
-The given node numberg
-is not zerog
-and does not correspond to any valid node,g
-or is zero where zero is not allowed.g
-.It Bq Er EBADFg
-The requested operation requires permissions not specified at the call tog
-.Fn open .g
-.It Bq Er ENAMETOOLONGg
-The given name or value fieldg
-exceeds the maximum allowed length (8191 bytes).g
-.Elg
-.Sh SEE ALSOg
-.Xr ioctl 2g
-.Sh BUGSg
-Due to limitations within the OPENPROM itself,g
-these functions run at elevated priorityg
-and may adversely affect system performance.g
-.Sh HISTORYg
-Ag
-sparc64g
-.Nm openpromg
-manual page first appeared ing
-.Ox 3.0 .g
+.\"	$OpenBSD: openprom.4,v 1.3 2001/10/25 10:42:01 miod Exp $
+.\" Copyright (c) 1992, 1993
+.\"	The Regents of the University of California.  All rights reserved.
+.\"
+.\" This software was developed by the Computer Systems Engineering group
+.\" at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
+.\" contributed to Berkeley.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by the University of
+.\"	California, Berkeley and its contributors.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\"     from: @(#)openprom.4	8.1 (Berkeley) 6/5/93
+.\"
+.Dd October 5, 2001
+.Dt OPENPROM 4 sparc64
+.Os
+.Sh NAME
+.Nm openprom
+.Nd OPENPROM interface
+.Sh SYNOPSIS
+.Fd #include <machine/openpromio.h>
+.Sh DESCRIPTION
+The file
+.Nm /dev/openprom
+is an interface to the ULTRAsparc OPENPROM.
+This interface is highly stylized;
+ioctls are used for all operations.
+These ioctls refer to
+.Dq nodes ,
+which are simply
+.Dq magic
+integer values describing data areas.
+Occasionally the number 0 may be used or returned instead,
+as described below.
+.Pp
+The calls that take and/or return a node
+use a pointer to an
+.Li int
+variable for this purpose;
+others use a pointer to an
+.Li struct opiocdesc
+descriptor,
+which contains a node and two counted strings.
+The first string is comprised of the fields
+.Li op_namelen
+(an
+.Li int )
+and
+.Li op_name
+(a
+.Li "char *" ) ,
+giving the name of a field.
+The second string is comprised of the fields
+.Li op_buflen
+and
+.Li op_buf ,
+used analogously.
+These two counted strings work in a
+.Dq value-result
+fashion.
+At entry to the ioctl,
+the counts are expected to reflect the buffer size;
+on return,
+the counts are updated to reflect the buffer contents.
+.Pp
+The following ioctls are supported:
+.Bl -tag -width OPIOCGETOPTNODE
+.It Dv OPIOCGETOPTNODE
+Takes nothing, and fills in the options node number.
+.It OPIOCGETNEXT
+Takes a node number and returns the number of the following node.
+The node following the last node is number 0;
+the node following number 0 is the first node.
+.It Dv OPIOCGETCHILD
+Takes a node number and returns the number of the first
+.Dq child
+of that node.
+This child may have siblings; these can be discovered by using
+.Dv OPIOCGETNEXT .
+.It Dv OPIOCGET
+Fills in the value of the named property for the given node.
+If no such property is associated with that node,
+the value length is set to -1.
+If the named property exists but has no value,
+the value length is set to 0.
+.It Dv OPIOCSET
+Writes the given value under the given name.
+The OPENPROM may refuse this operation;
+in this case
+.Dv EINVAL
+is returned.
+.It Dv OPIOCNEXTPROP
+Finds the property whose name follows the given name
+in OPENPROM internal order.
+The resulting name is returned in the value field.
+If the named property is the last, the
+.Dq next
+name is the empty string.
+As with
+.Dv OPIOCGETNEXT ,
+the next name after the empty string is the first name.
+.El
+.Sh FILES
+.Pa /dev/openprom
+.Sh ERRORS
+The following may result in rejection of an operation:
+.Bl -tag -width Er
+.It Bq Er EINVAL
+The given node number
+is not zero
+and does not correspond to any valid node,
+or is zero where zero is not allowed.
+.It Bq Er EBADF
+The requested operation requires permissions not specified at the call to
+.Fn open .
+.It Bq Er ENAMETOOLONG
+The given name or value field
+exceeds the maximum allowed length (8191 bytes).
+.El
+.Sh SEE ALSO
+.Xr ioctl 2
+.Sh BUGS
+Due to limitations within the OPENPROM itself,
+these functions run at elevated priority
+and may adversely affect system performance.
+.Sh HISTORY
+A
+sparc64
+.Nm openprom
+manual page first appeared in
+.Ox 3.0 .