typos;

1 files changed, 16 insertions, 15 deletions

diff --git a/share/man/man4/axe.4 b/share/man/man4/axe.4
index 69f2aa46f28..181fe3823b0 100644
--- a/share/man/man4/axe.4
+++ b/share/man/man4/axe.4
@@ -29,7 +29,7 @@
 .\" THE POSSIBILITY OF SUCH DAMAGE.
 .\"
 .\" $FreeBSD: /repoman/r/ncvs/src/share/man/man4/axe.4,v 1.3 2003/05/29 21:28:35 ru Exp $
-.\" $OpenBSD: axe.4,v 1.2 2004/04/02 07:19:42 miod Exp $
+.\" $OpenBSD: axe.4,v 1.3 2004/04/02 08:40:27 jmc Exp $
 .\"
 .Dd April 20, 2003
 .Dt AXE 4
@@ -43,7 +43,7 @@
 .Sh DESCRIPTION
 The
 .Nm
-driver provides support for USB ethernet adapters based on the ASIX
+driver provides support for USB Ethernet adapters based on the ASIX
 Electronics AX88172 USB 2.0 chipset, including the following:
 .Pp
 .Bl -bullet -compact
@@ -56,24 +56,25 @@ Netgear FA120
 .El
 .Pp
 The AX88172 is a USB 2.0 device which contains a 10/100
-ethernet MAC with MII interface and is designed to work with both
-ethernet and HomePNA transceivers.
+Ethernet MAC with MII interface and is designed to work with both
+Ethernet and HomePNA transceivers.
 The AX88172 will operate with
-both USB 1.x and USB 2.0 controllers, however performace with 1.x
-contollers will be limited since the USB 1.x standard specifies a
+both USB 1.x and USB 2.0 controllers, however performance with 1.x
+controllers will be limited since the USB 1.x standard specifies a
 maximum transfer speed of 12Mbps.
 Users with USB 1.x controllers should therefore not expect to actually
 achieve 100Mbps speeds with these devices.
 .Pp
-The AX88172 supports a 64-bit multicast hash table, single perfect
-filter entry for the station address, all-multicast mode and promiscuous mode.
+The AX88172 supports a 64-bit multicast hash table,
+single perfect filter entry for the station address,
+all-multicast mode, and promiscuous mode.
 Packets are
 received and transmitted over separate USB bulk transfer endpoints.
 .Pp
 The
 .Nm
 driver supports the following media types:
-.Bl -tag -width full-duplex
+.Bl -tag -width "autoselect"
 .It autoselect
 Enable autoselection of the media type and options (this is the default).
 The user can manually override the autoselected mode by adding media
@@ -83,21 +84,21 @@ file.
 .It 10baseT
 Set 10Mbps operation.
 .It 100baseTX
-Set 100Mbps (fast ethernet) operation.
+Set 100Mbps (fast Ethernet) operation.
 .El
 .Pp
 The
 .Tm
 driver supports the following media options:
-.Bl -tag -width full-duplex
+.Bl -tag -width "full-duplex"
 .It full-duplex
-Force full duplex operation.
+Force full-duplex operation.
 .It half-duplex
 Force half-duplex operation.
 .El
 .Pp
 The interface will operate in
-half duplex mode if no media option is specified.
+half-duplex mode if no media option is specified.
 .Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
@@ -126,12 +127,12 @@ The driver failed to allocate an mbuf for the receiver ring.
 The
 .Nm
 device driver first appeared in
-.Fx 5.0 .
+.Ox 3.6 .
 .Sh AUTHORS
 The
 .Nm
 driver was written by
-.An Bill Paul Aq wpaul@windriver.com .
+.An Bill Paul Aq wpaul@windriver.com
 and ported to
 .Ox
 by