autoconf(4) cleanup:

- remove blatant lies (missing diagnostics, unconfigured devices never
detected even on pci or such busses...)
- .Tn UNIX -> .Ox
- xref boot_`arch`(8) rather than boot(8) when boot(8) does not exist
- vague attempt to harmonize common texts

ok deraadt@

8 files changed, 31 insertions, 241 deletions

diff --git a/share/man/man4/man4.amiga/autoconf.4 b/share/man/man4/man4.amiga/autoconf.4
index 346356df5e5..8b2307f70f1 100644
--- a/share/man/man4/man4.amiga/autoconf.4
+++ b/share/man/man4/man4.amiga/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.6 2001/10/05 14:45:53 mpech Exp $
+.\"	$OpenBSD: autoconf.4,v 1.7 2002/09/26 22:11:44 miod Exp $
 .\"
 .\" Copyright (c) 1990, 1991 Regents of the University of California.
 .\" All rights reserved.
@@ -37,7 +37,7 @@
 .Nd diagnostics from the autoconfiguration code
 .Sh DESCRIPTION
 When
-.Tn OpenBSD
+.Ox
 bootstraps it probes the innards of the machine
 on which it is running
 and locates controllers, drives, and other devices, printing out
@@ -47,49 +47,7 @@ This procedure is driven by a system configuration table which is processed by
 and compiled into each kernel.
 Devices which exist in the machine but are not configured into the
 kernel are not detected.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU class not configured.
-You tried to boot
-.Tn OpenBSD
-on a class of
-.Tn CPU
-type which it doesn't
-(or at least this compiled version of
-.Tn OpenBSD
-doesn't) understand.
-.Pp
-.It %s at mainbus0.
-An Amiga internal device
-.Ql %s
-was configured
-.Pp  not configured.
-If this line follows the
-.Ql fd0 at fdc0
-configuration line, this diagnostic
-indicates that a second floppy drive was detected, but was not configured
-into the kernel.
-.Pp
-.It zbus0 at mainbus0 [mem 0x%x-0x%x].
-The kernel is configuring AutoConfigured expansion boards.
-If any Zorro II memory was detected, the virtual address of the space
-reserved for DMA bounce buffers is printed.
-.Pp
-.It %s at zbus0: rom 0x%x man/prod %d/%d.
-A Zorro expansion board was configured.
-.Ql Rom 0x%0x
-is the physical address the board was configured at.
-.Ql Man/prod &d/%d
-is the manufacturer/product codes.
-.Pp
-.It %s at zbus0: rom 0x%x man/prod %d/%d not configured.
-A Zorro expansion board located at
-.Ql rom 0x%0x
-with a manufacturer/product code
-.Ql %d/%d
-was found that is not configured into the kernel.
-.El
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_amiga 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.hp300/autoconf.4 b/share/man/man4/man4.hp300/autoconf.4
index 32166c13973..f298a7a6523 100644
--- a/share/man/man4/man4.hp300/autoconf.4
+++ b/share/man/man4/man4.hp300/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.4 2001/10/05 14:45:53 mpech Exp $
+.\"	$OpenBSD: autoconf.4,v 1.5 2002/09/26 22:11:49 miod Exp $
 .\
 .\" Copyright (c) 1990, 1991, 1993
 .\"	The Regents of the University of California.  All rights reserved.
@@ -41,7 +41,7 @@
 .Nd diagnostics from the autoconfiguration code
 .Sh DESCRIPTION
 When
-.Tn UNIX
+.Ox
 bootstraps it probes the innards of the machine
 on which it is running
 and locates controllers, drives, and other devices, printing out
@@ -49,90 +49,18 @@ what it finds on the console.
 This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
-.Pp
-Autoconfiguration on the
-.Tn HP300 Ns s
-is similar to that on the
-.Tn VAX ,
-the primary difference is in the naming conventions.
-On the
-.Tn HP300 ,
-if devices exist which are not configured they will be ignored;
-if devices exist of unsupported type they will be ignored.
+Devices which exist in the machine but are not configured into the
+kernel are not detected.
 .Pp
 Normally, the system uses the disk from which it was loaded as the root
 filesystem.
-If that is not possible,
-a generic system will use
-.Sq Li rd0
-if it exists.
 If such a system is booted with the
 .Dv RB_ASKNAME
 option (see
 .Xr reboot 2 ) ,
 then the name of the root device is read from the console terminal at boot
 time, and any available device may be used.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU type not configured.
-You tried to boot
-.Tn UNIX
-on a
-.Tn CPU
-type which it doesn't
-(or at least this compiled version of
-.Tn UNIX
-doesn't) understand.
-.Pp
-.It hpib%d at sc%d, ipl %d.
-An
-.Tn HP-IB
-was found at sc%d (the select code)
-with ipl%d (interrupt priority level).
-.Tn UNIX
-will call it hpib%d.
-.Pp
-.It %s%d: %s.
-.It %s%d at hpib%d, slave %d.
-An
-.Tn HP-IB
-disk or tape controller was found.
-For disks
-.Ql %s%d
-will look like
-.Sq Li rd0 ,
-for tapes like
-.Sq Li ct0 .
-The
-.Ql %s
-in the first line will be a product type like ``7945A'' or ``9144''.
-The slave number comes from the address select switches on the drive.
-.Pp
-.It grf0 csr 0x560000
-.It grf%d at sc%d
-A bit mapped display was found either at the ``internal'' address (first case)
-or at some ``external'' select code (second case).
-If it exists, the internal display will always be unit 0.
-.Pp
-.It %s%d at sc%d, ipl %d flags %d
-Another peripheral controller was found at the indicated select code
-and with indicated interrupt priority level.
-.Ql %s
-will be one of
-.Xr dca 4
-(single-port serial interfaces),
-.Xr dcm 4
-(four-port serial interfaces), or
-.Xr le 4
-.Pf ( Tn LAN
-cards).
-The slave number comes from the address select switches on the interface card.
-.El
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_hp300 8 ,
 .Xr config 8
-.Rs
-.%T 4.3BSD for the HP300
-.%O in the distribution documentation package
-.Re
diff --git a/share/man/man4/man4.i386/autoconf.4 b/share/man/man4/man4.i386/autoconf.4
index 5bed3212d4b..0d8d852809a 100644
--- a/share/man/man4/man4.i386/autoconf.4
+++ b/share/man/man4/man4.i386/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.5 2000/07/05 13:46:52 aaron Exp $
+.\"	$OpenBSD: autoconf.4,v 1.6 2002/09/26 22:11:49 miod Exp $
 .\"
 .\" Copyright (c) 1994 Christopher G. Demetriou
 .\" All rights reserved.
@@ -45,20 +45,8 @@ This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
 Devices which exist in the machine but are not configured into the
-kernel are not detected.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU class not configured.
-You tried to boot
-.Ox
-on a class of
-.Tn CPU
-type which it doesn't
-(or at least this compiled version of
-.Ox
-doesn't) understand.
-.El
+kernel are usually not detected.
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_i386 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.mac68k/autoconf.4 b/share/man/man4/man4.mac68k/autoconf.4
index 5327f01bd01..654e50f1952 100644
--- a/share/man/man4/man4.mac68k/autoconf.4
+++ b/share/man/man4/man4.mac68k/autoconf.4
@@ -29,7 +29,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\"	$OpenBSD: autoconf.4,v 1.3 2001/10/05 14:45:54 mpech Exp $
+.\"	$OpenBSD: autoconf.4,v 1.4 2002/09/26 22:11:49 miod Exp $
 .\"	$NetBSD: autoconf.4,v 1.2 1997/10/13 11:23:30 lukem Exp $
 .\"
 .Dd July 17, 1997
@@ -40,7 +40,7 @@
 .Nd diagnostics from the autoconfiguration code
 .Sh DESCRIPTION
 When
-.Tn OpenBSD
+.Ox
 bootstraps it probes the innards of the machine
 on which it is running
 and locates controllers, drives, and other devices, printing out
@@ -58,45 +58,7 @@ All
 slots are probed,
 and information about any cards found is reported even if the card
 is not currently configured.
-.Sh DIAGNOSTICS
-.Bl -diag
-.\"
-.\" The following doesn't seem to happen on the mac68k port, but
-.\" keep here waiting until I know for sure --Colin
-.\"
-.\".It CPU class not configured.
-.\"You tried to boot
-.\".Tn OpenBSD
-.\"on a class of
-.\".Tn CPU
-.\"type which it doesn't
-.\"(or at least this compiled version of
-.\".Tn OpenBSD
-.\"doesn't) understand.a
-.It %s%d at obio0: %s.
-The system is configuring an onboard I/O controller.
-.It  addr %x not configured.
-An onboard I/O controller was encountered that is not configured into the
-kernel.
-.It %s at nubus%d slot %x.
-The system is configuring a NuBus expansion card in slot %x.
-.It %s at nubus%d slot %x: %s (Vendor: %s, Part: %s Type: %x %x %x %x) not configured.
-A NuBus expansion card was encountered that is not configured into the
-kernel.
-.Sq Vendor
-is the manufacturer of the board,
-.Sq Part
-is the name of the board, and
-.Sq Type
-is the Apple-defined type.
-.It %s: channel %d not configured.
-A serial device channel was encountered that is not configured into the
-kernel.
-.It %s at %s not configured.
-A device which was configured into the kernel was unable to properly
-initialize itself.
-.El
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_mac68k 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.macppc/autoconf.4 b/share/man/man4/man4.macppc/autoconf.4
index 1e05cefb1ae..f32deb0017a 100644
--- a/share/man/man4/man4.macppc/autoconf.4
+++ b/share/man/man4/man4.macppc/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.2 2001/09/02 19:36:55 miod Exp $
+.\"	$OpenBSD: autoconf.4,v 1.3 2002/09/26 22:11:49 miod Exp $
 .\"
 .\" Copyright (c) 1994 Christopher G. Demetriou
 .\" All rights reserved.
@@ -45,19 +45,8 @@ This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
 Devices which exist in the machine but are not configured into the
-kernel are not detected.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU class not configured.
-You tried to boot
-.Ox
-on a class of
-.Tn CPU
-type which it doesn't
-(or at least this compiled version of
-.Ox
-doesn't) understand.
-.El
+kernel are usually not detected.
 .Sh SEE ALSO
 .Xr intro 4 ,
+.Xr boot_macppc 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.sparc/autoconf.4 b/share/man/man4/man4.sparc/autoconf.4
index 8b13c9d6852..a9ee35e3b08 100644
--- a/share/man/man4/man4.sparc/autoconf.4
+++ b/share/man/man4/man4.sparc/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.1 2001/08/21 00:28:10 jason Exp $
+.\"	$OpenBSD: autoconf.4,v 1.2 2002/09/26 22:11:49 miod Exp $
 .\"
 .\" Copyright (c) 1994 Christopher G. Demetriou
 .\" All rights reserved.
@@ -45,20 +45,8 @@ This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
 Devices which exist in the machine but are not configured into the
-kernel are not detected.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU class not configured.
-You tried to boot
-.Ox
-on a class of
-.Tn CPU
-type which it doesn't
-(or at least this compiled version of
-.Ox
-doesn't) understand.
-.El
+kernel are usually not detected.
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_sparc 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.sparc64/autoconf.4 b/share/man/man4/man4.sparc64/autoconf.4
index 02aa54ca478..d532e45f81c 100644
--- a/share/man/man4/man4.sparc64/autoconf.4
+++ b/share/man/man4/man4.sparc64/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.2 2002/01/25 04:48:04 jason Exp $
+.\"	$OpenBSD: autoconf.4,v 1.3 2002/09/26 22:11:49 miod Exp $
 .\"
 .\" Copyright (c) 1994 Christopher G. Demetriou
 .\" All rights reserved.
@@ -45,20 +45,8 @@ This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
 Devices which exist in the machine but are not configured into the
-kernel are not detected.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It CPU class not configured.
-You tried to boot
-.Ox
-on a class of
-.Tn CPU
-type which it does not
-(or at least this compiled version of
-.Ox
-does not) understand.
-.El
+kernel may not be detected.
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_sparc64 8 ,
 .Xr config 8
diff --git a/share/man/man4/man4.vax/autoconf.4 b/share/man/man4/man4.vax/autoconf.4
index 77397cf7f3c..2045151ed5d 100644
--- a/share/man/man4/man4.vax/autoconf.4
+++ b/share/man/man4/man4.vax/autoconf.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: autoconf.4,v 1.6 2001/10/05 14:45:54 mpech Exp $
+.\"	$OpenBSD: autoconf.4,v 1.7 2002/09/26 22:11:49 miod Exp $
 .\"	$NetBSD: autoconf.4,v 1.3 1996/03/03 17:13:13 thorpej Exp $
 .\"
 .\" Copyright (c) 1980, 1991 Regents of the University of California.
@@ -39,16 +39,15 @@
 .Os
 .Sh NAME
 .Nm autoconf
-.Nd "diagnostics from the autoconfiguration code"
+.Nd diagnostics from the autoconfiguration code
 .Sh DESCRIPTION
 When
 .Ox
 bootstraps it probes the innards of the machine
-on which it is running and
-locates controllers, drives, and other devices.
-Each item found is recorded on the console.
-This procedure is driven by a system
-configuration table which is processed by
+on which it is running
+and locates controllers, drives, and other devices, printing out
+what it finds on the console.
+This procedure is driven by a system configuration table which is processed by
 .Xr config 8
 and compiled into each kernel.
 .Pp
@@ -104,16 +103,6 @@ then the name of the root device is read from the console terminal at boot
 time, and any available device may be used.
 .Sh DIAGNOSTICS
 .Bl -diag
-.It cpu type %d not configured.
-You tried to boot
-.Ox
-on a
-.Tn CPU
-type which it doesn't (or at least this compiled version of
-.Ox
-doesn't)
-understand.
-.Pp
 .It mba%d at tr%d.
 A
 .Tn MASSBUS
@@ -246,7 +235,7 @@ The device did not present
 a valid interrupt vector, rather presented 0 (a passive release condition)
 to the adapter.
 .Pp
-.It %s%d at uba%d csr %o didn't interrupt.
+.It "%s%d at uba%d csr %o didn't interrupt."
 The device did not interrupt,
 likely because it is broken, hung, or not the kind of device it is advertised
 to be.
@@ -267,7 +256,7 @@ case.
 .El
 .Sh SEE ALSO
 .Xr intro 4 ,
-.Xr boot 8 ,
+.Xr boot_vax 8 ,
 .Xr config 8
 .Sh HISTORY
 The