fix some lists and macros;

15 files changed, 115 insertions, 130 deletions

diff --git a/share/man/man8/boot_config.8 b/share/man/man8/boot_config.8
index ea82e126285..f7a2ae685df 100644
--- a/share/man/man8/boot_config.8
+++ b/share/man/man8/boot_config.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_config.8,v 1.19 2003/06/06 19:28:06 jmc Exp $
+.\"	$OpenBSD: boot_config.8,v 1.20 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1996 Mats O Jansson
 .\" All rights reserved.
@@ -47,7 +47,6 @@ The boot time configuration is invoked by the
 option when
 .Ox
 prompts for a kernel to boot:
-.Pp
 .Bd -literal
 >> OpenBSD BOOT 640/31744 k [1.29]
 use ? for file list, or carriage return for defaults
@@ -63,7 +62,7 @@ UKC>
 Changes made can be saved for the next reboot, by using
 .Xr config 8 .
 .Sh COMMANDS
-.Bl -tag -width "disable devno | dev" indent
+.Bl -tag -width "disable devno | dev"
 .It Ic add Ar dev
 Add a device through copying another.
 .It Ic base Ar 8 | 10 | 16
@@ -107,7 +106,6 @@ e.g. wrong IRQ in OpenBSD/i386.
 The ethernet card is supposed to use the
 .Xr ne 4
 driver.
-.Pp
 .Bd -literal
 .No UKC> Ic find ne
 24 ne0 at isa0 port 0x240 size 0 iomem 0xd8000 iosiz 0 irq 9 drq -1 drq2 -1 flags 0x0
@@ -123,7 +121,6 @@ So the irq on ne1 should be changed via the
 .Fa change
 command.
 The device can be specified by either name or number.
-.Pp
 .Bd -literal
 .No UKC> Ic change ne1
 25 ne1 at isa0 port 0x300 size 0 iomem -1 iosiz 0 irq 10 drq -1 drq2 -1 flags 0x0
@@ -146,7 +143,6 @@ device at the probed location.
 One known case is the Mitsumi
 CD-ROM in OpenBSD/i386.
 The simplest thing to solve that problem is to disable mcd0.
-.Pp
 .Bd -literal
 .No UKC> Ic find mcd0
  29 mcd0 at isa0 port 0x300 size 0 iomem -1 iosiz 0 irq 10 drq -1 drq2 -1 flags 0x0
@@ -178,7 +174,6 @@ UKC>
 It is possible to add new devices, but only devices that were linked into the
 kernel.
 If a new device is added, following devices will be renumbered.
-.Pp
 .Bd -literal
 .No UKC> Ic find ep
  11 ep0 at isa0 port -1 size 0 iomem -1 iosiz 0 irq -1 drq -1 drq2 -1 flags 0x0
@@ -209,7 +204,6 @@ When configuration is completed, booting can proceed by issuing the
 or
 .Ic exit
 commands.
-.Pp
 .Bd -literal
 .No UKC> Ic quit
 Continuing...
diff --git a/share/man/man8/man8.alpha/MAKEDEV.8 b/share/man/man8/man8.alpha/MAKEDEV.8
index f140a49bce3..adf1c8b6113 100644
--- a/share/man/man8/man8.alpha/MAKEDEV.8
+++ b/share/man/man8/man8.alpha/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.4 2003/06/02 16:16:26 miod Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.5 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 2001 Miodrag Vallat.
 .\" All rights reserved.
@@ -72,8 +72,8 @@ The alpha supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Pseudo-names
+.Bl -tag -width wsmouse -compact
 .It Ar all
 All known devices for the alpha.
 .It Ar std
@@ -85,8 +85,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Device-names
+.Bl -tag -width wsmouse -compact
 .It Ar bpf#
 Berkeley packet filters.
 .It Ar cd#
diff --git a/share/man/man8/man8.alpha/boot_alpha.8 b/share/man/man8/man8.alpha/boot_alpha.8
index 00008e81eea..ecab120866f 100644
--- a/share/man/man8/man8.alpha/boot_alpha.8
+++ b/share/man/man8/man8.alpha/boot_alpha.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_alpha.8,v 1.9 2003/06/06 19:28:06 jmc Exp $
+.\"	$OpenBSD: boot_alpha.8,v 1.10 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 2002, Miodrag Vallat.
 .\" All rights reserved.
@@ -32,7 +32,7 @@
 .Ss Cold starts
 When powered on, the SRM firmware will proceed to its initialization, and
 will boot an operating system if the
-.Ev Em auto_action
+.Em auto_action
 variable is set to
 .Dq boot
 or
@@ -45,26 +45,26 @@ After a panic, or if the system is rebooted via
 or
 .Xr shutdown 8 ,
 the SRM console will only restart the system if the
-.Ev Em auto_action
+.Em auto_action
 variable is set to
 .Dq boot .
 .Ss Boot process options
 The SRM console will attempt to boot a kernel named from the
-.Ev Em boot_file
+.Em boot_file
 environment variable, on the device listed in the
-.Ev Em bootdef_dev
+.Em bootdef_dev
 variable.
 A list of the recognized SRM devices can be obtained with the command
 .Ic show dev
 at the SRM prompt.
 If the
-.Ev Em boot_file
+.Em boot_file
 variable is not set or empty,
 .Pa /bsd
 will be used by default.
 .Pp
 The kernel will be passed the options listed in the
-.Ev Em boot_osflags
+.Em boot_osflags
 variable.
 Option letters are case insensitive.
 The following option letters are recognized:
diff --git a/share/man/man8/man8.hppa/MAKEDEV.8 b/share/man/man8/man8.hppa/MAKEDEV.8
index 2827ca1a3f5..626cb834eef 100644
--- a/share/man/man8/man8.hppa/MAKEDEV.8
+++ b/share/man/man8/man8.hppa/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.3 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.4 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1991 The Regents of the University of California.
 .\" All rights reserved.
@@ -79,8 +79,8 @@ The hppa supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width openprom indent -compact
+.Sy Pseudo-names
+.Bl -tag -width openprom -compact
 .It Ar all
 All known devices for the hppa.
 .It Ar std
@@ -92,8 +92,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width openprom indent -compact
+.Sy Device-names
+.Bl -tag -width openprom -compact
 .It Ar audio
 Audio device.
 .It Ar bpf#
diff --git a/share/man/man8/man8.hppa/boot_hppa.8 b/share/man/man8/man8.hppa/boot_hppa.8
index d4b86f89c81..5575dde5201 100644
--- a/share/man/man8/man8.hppa/boot_hppa.8
+++ b/share/man/man8/man8.hppa/boot_hppa.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_hppa.8,v 1.6 2003/06/19 18:51:08 mickey Exp $
+.\"	$OpenBSD: boot_hppa.8,v 1.7 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 2002, Miodrag Vallat.
 .\" All rights reserved.
@@ -208,17 +208,17 @@ The following list only mentions commands impacting the boot process.
 .It Ic auto boot
 Displays or changes the autoboot setting.
 If
-.Ev Ic auto boot
+.Ic auto boot
 is set to
 .Dq on ,
 the PDC will always attempt to boot.
 The booted device chosen will depend on the
-.Ev Ic auto search
+.Ic auto search
 setting.
 .It Ic auto search
 Displays or changes the device scan setting.
 If
-.Ev Ic auto search
+.Ic auto search
 is set to
 .Dq on ,
 the PDC will attempt to boot the first bootable device found in
@@ -245,18 +245,18 @@ devices connected to secondary controllers,
 the highest ID numbers being preferred.
 .El
 If
-.Ev Ic auto search
+.Ic auto search
 is set to
 .Dq off
 and the primary boot path points to a bootable device,
 no device scan will occur.
 .Pp
 Note that setting
-.Ev Ic auto search
+.Ic auto search
 to
 .Dq on
 will force autoboot, regardless of the
-.Ev Ic auto boot
+.Ic auto boot
 value.
 .It Ic boot
 Boots off the specified device.
diff --git a/share/man/man8/man8.i386/MAKEDEV.8 b/share/man/man8/man8.i386/MAKEDEV.8
index ac42501e301..5bf9d11f755 100644
--- a/share/man/man8/man8.i386/MAKEDEV.8
+++ b/share/man/man8/man8.i386/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.23 2003/06/03 21:09:01 deraadt Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.24 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1997, Jason Downs.  All rights reserved.
 .\"
@@ -100,8 +100,8 @@ The i386 supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Pseudo-names
+.Bl -tag -width wsmouse -compact
 .It Ar all
 All known devices for the i386.
 .It Ar std
@@ -113,8 +113,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Device-names
+.Bl -tag -width wsmouse -compact
 .It Ar apm
 Power management devices.
 .It Ar audio
diff --git a/share/man/man8/man8.macppc/MAKEDEV.8 b/share/man/man8/man8.macppc/MAKEDEV.8
index 0d5fdfb8b08..69004794052 100644
--- a/share/man/man8/man8.macppc/MAKEDEV.8
+++ b/share/man/man8/man8.macppc/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.7 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.8 2003/07/10 08:30:36 jmc Exp $
 .\" Copyright (c) 1991 The Regents of the University of California.
 .\" All rights reserved.
 .\"
@@ -76,8 +76,8 @@ The macppc supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Pseudo-names
+.Bl -tag -width wsmouse -compact
 .It Ar all
 All known devices for the macppc.
 .It Ar std
@@ -89,8 +89,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width wsmouse indent -compact
+.Sy Device-names
+.Bl -tag -width wsmouse -compact
 .It Ar bpf#
 Berkeley packet filters.
 .It Ar ccd#
diff --git a/share/man/man8/man8.macppc/boot_macppc.8 b/share/man/man8/man8.macppc/boot_macppc.8
index 0a3754d8e03..1a7ea83b38e 100644
--- a/share/man/man8/man8.macppc/boot_macppc.8
+++ b/share/man/man8/man8.macppc/boot_macppc.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_macppc.8,v 1.9 2003/06/06 19:28:06 jmc Exp $
+.\"	$OpenBSD: boot_macppc.8,v 1.10 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1992, 1993
 .\"	The Regents of the University of California.  All rights reserved.
@@ -45,19 +45,19 @@ the
 .Tn Open Firmware
 will proceed to its initialization, and will boot an operating system
 if the
-.Ev Em auto-boot?
+.Em auto-boot?
 variable is set to
 .Dq true ,
 or will wait for interactive commands otherwise.
 .Ss Boot process description
 The Apple OpenFirmware will normally load the kernel from the device and
 filename as instructed by the
-.Ev Em boot-device
+.Em boot-device
 and
-.Ev Em boot-file
+.Em boot-file
 variables.
 If the
-.Ev Em boot-file
+.Em boot-file
 variable is empty, the
 .Ox
 bootloader will look for a kernel named
@@ -67,7 +67,7 @@ To reset this variable to its default, empty, value, type the following:
 .Pp
 .Em \	ok
 set-default
-.Ev Em boot-device
+.Em boot-device
 .Pp
 The
 .Ox
diff --git a/share/man/man8/man8.sparc/MAKEDEV.8 b/share/man/man8/man8.sparc/MAKEDEV.8
index c1344d9fe6c..c21bc925453 100644
--- a/share/man/man8/man8.sparc/MAKEDEV.8
+++ b/share/man/man8/man8.sparc/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.14 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.15 2003/07/10 08:30:36 jmc Exp $
 .\" Copyright (c) 1991 The Regents of the University of California.
 .\" All rights reserved.
 .\"
@@ -78,8 +78,8 @@ The sparc supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width openprom indent -compact
+.Sy Pseudo-names
+.Bl -tag -width openprom -compact
 .It Ar all
 All known devices for the sparc.
 .It Ar std
@@ -91,8 +91,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width openprom indent -compact
+.Sy Device-names
+.Bl -tag -width openprom -compact
 .It Ar audio
 Audio device.
 .It Ar bpf#
diff --git a/share/man/man8/man8.sparc/boot_sparc.8 b/share/man/man8/man8.sparc/boot_sparc.8
index 98c063a8d2a..2ef92f3119a 100644
--- a/share/man/man8/man8.sparc/boot_sparc.8
+++ b/share/man/man8/man8.sparc/boot_sparc.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sparc.8,v 1.7 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: boot_sparc.8,v 1.8 2003/07/10 08:30:36 jmc Exp $
 .\"	$NetBSD: boot_sparc.8,v 1.4 1995/04/25 11:37:25 pk Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -94,7 +94,7 @@ incantation in new-mode to force the ROM to always start in new-mode:
 .Pp
 .Em \	ok
 setenv
-.Ev Em sunmon-compat?
+.Em sunmon-compat?
 false
 .Ss Old-style PROM operation
 By default, the old ROM will poll for boot devices, unless the eeprom settings
@@ -112,10 +112,10 @@ for more information.
 .Ss OpenBoot PROM version 1 operation
 Older OpenBOOT PROM, as well as hybrid (dual-mode) versions operating in
 compatibility mode (with the variable
-.Ev Em version2?
+.Em version2?
 set to false) will look for a bootloader and kernel filename as specified
 by the
-.Ev Em boot-from
+.Em boot-from
 variable.
 To change the default so that
 .Ox
@@ -123,7 +123,7 @@ will be loaded, type the following:
 .Pp
 .Em \	ok
 setenv
-.Ev Em boot-from
+.Em boot-from
 sd(0,0,0)bsd
 .Pp
 Replace
@@ -131,31 +131,31 @@ Replace
 with the appropriate boot device if necessary.
 .Pp
 Autoboot is enabled by setting the
-.Ev Em auto-boot?
+.Em auto-boot?
 variable to
 .Dq true ,
 and is the factory default.
 .Ss OpenBoot PROM version 2 operation
 Version 2 OpenBOOT PROM will look for a bootloader on the device specified
 by the
-.Ev Em boot-device
+.Em boot-device
 variable.
 The
 .Ox
 bootloader will then look for a kernel named
 .Pa bsd
 by default, unless the
-.Ev Em boot-file
+.Em boot-file
 variable is set, or a different filename has been specified
 in the boot command.
 To reset this variable to its default, empty, value, type the following:
 .Pp
 .Em \	ok
 set-default
-.Ev Em boot-file
+.Em boot-file
 .Pp
 Autoboot is enabled by setting the
-.Ev Em auto-boot?
+.Em auto-boot?
 variable to
 .Dq true ,
 and is the factory default.
@@ -196,7 +196,7 @@ during the next multi-user boot cycle), and after the dump is complete
 If the
 .Xr sysctl 8
 variable
-.Ev Em ddb.console
+.Em ddb.console
 is enabled, at any time you can break back to the ROM by pressing the
 .Dq L1
 .Pq also known as the Dq stop key
diff --git a/share/man/man8/man8.sparc64/MAKEDEV.8 b/share/man/man8/man8.sparc64/MAKEDEV.8
index b891d858c99..8300cffc1fa 100644
--- a/share/man/man8/man8.sparc64/MAKEDEV.8
+++ b/share/man/man8/man8.sparc64/MAKEDEV.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: MAKEDEV.8,v 1.6 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: MAKEDEV.8,v 1.7 2003/07/10 08:30:36 jmc Exp $
 .\" Copyright (c) 1991 The Regents of the University of California.
 .\" All rights reserved.
 .\"
@@ -78,8 +78,8 @@ The sparc64 supports the following devices.
 Where a device name is followed by a hash sign ("#"), the hash sign
 must be replaced by a unit number.
 .Pp
-.Sy Pseudo\-names
-.Bl -tag -width openprom indent -compact
+.Sy Pseudo-names
+.Bl -tag -width openprom -compact
 .It Ar all
 All known devices for the sparc64.
 .It Ar std
@@ -91,8 +91,8 @@ Configuration specific devices.
 All wscons-related devices.
 .El
 .Pp
-.Sy Device\-names
-.Bl -tag -width openprom indent -compact
+.Sy Device-names
+.Bl -tag -width openprom -compact
 .It Ar audio
 Audio device.
 .It Ar bpf#
diff --git a/share/man/man8/man8.sparc64/boot_sparc64.8 b/share/man/man8/man8.sparc64/boot_sparc64.8
index e197447d9e1..b3284077641 100644
--- a/share/man/man8/man8.sparc64/boot_sparc64.8
+++ b/share/man/man8/man8.sparc64/boot_sparc64.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sparc64.8,v 1.5 2003/06/02 23:30:15 millert Exp $
+.\"	$OpenBSD: boot_sparc64.8,v 1.6 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1992, 1993
 .\"	The Regents of the University of California.  All rights reserved.
@@ -64,24 +64,24 @@ tape drive
 The UltraSPARC
 .Tn Open Firmware
 will normally look for a bootloader on the device specified by the
-.Ev Em boot-device
+.Em boot-device
 variable.
 The
 .Ox
 bootloader will then look for a kernel named
 .Pa bsd
 by default, unless the
-.Ev Em boot-file
+.Em boot-file
 variable is set, or a different filename has been specified
 in the boot command.
 To reset this variable to its default, empty, value, type the following:
 .Pp
 .Em \	ok
 set-default
-.Ev Em boot-file
+.Em boot-file
 .Pp
 Autoboot is enabled by setting the
-.Ev Em auto-boot?
+.Em auto-boot?
 variable to
 .Dq true ,
 and is the factory default.
@@ -109,7 +109,7 @@ The system will be booted multi-user unless this option is specified.
 If the
 .Xr sysctl 8
 variable
-.Ev Em ddb.console
+.Em ddb.console
 is enabled, at any time you can break back to the ROM by pressing the
 .Dq L1
 and
diff --git a/share/man/man8/rc.conf.8 b/share/man/man8/rc.conf.8
index b44778e1060..114c111372c 100644
--- a/share/man/man8/rc.conf.8
+++ b/share/man/man8/rc.conf.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: rc.conf.8,v 1.11 2003/04/13 11:41:10 jmc Exp $
+.\"	$OpenBSD: rc.conf.8,v 1.12 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 1997 Ian F. Darwin
 .\" All rights reserved.
@@ -55,13 +55,13 @@ The first is used to turn features on or off.
 For example, whether the system runs the
 .Nm routed
 daemon is determined by the line in this section
-.Bd -literal -indent xxx
+.Bd -literal -offset indent
 routed=NO		# for normal use: "-q"
 .Ed
 .Pp
 If this line is edited to contain some valid routed daemon command-line
 flags, such as
-.Bd -literal -indent xxx
+.Bd -literal -offset indent
 routed="-q"		# for normal use: "-q"
 .Ed
 .Pp
@@ -71,7 +71,7 @@ The second section contains some other programs that can either be run or not,
 but that don't need options.
 They can be set to YES or NO.
 For example, the line
-.Bd -literal -indent xxx
+.Bd -literal -offset indent
 nfs_server=NO
 .Ed
 .Pp
@@ -89,9 +89,10 @@ server is not running.
 For example, if
 .Nm nfs_server ,
 is enabled, then the line
-.Bd -literal -indent xxx
+.Bd -literal -offset indent
 nfsd_flags="-tun 4"
 .Ed
+.Pp
 provides command-line arguments for the NFS server.
 .Pp
 This particular line instructs
diff --git a/share/man/man8/release.8 b/share/man/man8/release.8
index 8c1febde30c..a6719b3bb0e 100644
--- a/share/man/man8/release.8
+++ b/share/man/man8/release.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: release.8,v 1.31 2003/05/13 18:46:50 jmc Exp $
+.\"	$OpenBSD: release.8,v 1.32 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\"	Copyright (c) 2000 Marco S. Hyman
 .\"
@@ -42,7 +42,7 @@ The following sections describe each of the required steps in detail.
 .Pp
 Commands to be run as a user with write permissions on the source and
 ports trees
-.No ( Ns Pa /usr/src
+.Pf ( Ns Pa /usr/src
 and
 .Pa /usr/ports
 respectively)
@@ -63,7 +63,7 @@ tag the
 .Ox
 developers add to the repository prior to making a release.
 There are two tags, one which identifies the release as it exists on the
-.Tn CD\-ROM
+.Tn CD-ROM
 and another which identifies the
 .Em stable
 branch.
@@ -77,7 +77,7 @@ The tags are of the form:
 .Bl -tag -width OPENBSD_x_y_BASE
 .It Va OPENBSD_x_y_BASE
 This tag marks the source as it exists on the release
-.Tn CD\-ROM
+.Tn CD-ROM
 where
 .Ar x
 is the major release number and
@@ -196,7 +196,7 @@ At this point your system is up-to-date and running the code that you
 are going to make into a release.
 .Ss "4. Make and validate the system release"
 The system release consists of a generic kernel, one
-.Tn CD\-ROM
+.Tn CD-ROM
 and two floppy boot-able file-systems, the release
 .Sq tarballs ,
 installation instructions, and checksum files.
@@ -228,7 +228,7 @@ is used in the release generation process.
 .El
 .Pp
 The floppy and
-.Tn CD\-ROM
+.Tn CD-ROM
 .Pa RAMDISK
 images require a special tool which is created first.
 The release process is:
@@ -266,7 +266,7 @@ The only thing missing is the X Window System
 The
 .Va XF4
 tree is primarily
-.Xr imake 1 No Ns -based
+.Xr imake 1 Ns -based
 and doesn't contain the
 .Dq obj
 directory mechanism that comes with Berkeley
diff --git a/share/man/man8/starttls.8 b/share/man/man8/starttls.8
index 388a1bf8cb8..1cd0cea5c8f 100644
--- a/share/man/man8/starttls.8
+++ b/share/man/man8/starttls.8
@@ -1,4 +1,4 @@
-.\" $OpenBSD: starttls.8,v 1.8 2003/06/06 19:28:06 jmc Exp $
+.\" $OpenBSD: starttls.8,v 1.9 2003/07/10 08:30:36 jmc Exp $
 .\"
 .\" Copyright (c) 2001 Jose Nazario <jose@monkey.org>
 .\" All rights reserved.
@@ -75,16 +75,14 @@ For the purposes of this example the certificates will be stored in
 .Pa /etc/mail/certs ,
 though it is possible to use a different directory if needed.
 If this directory does not already exist, you must create it:
-.Bd -literal -offset indent -width Ds
-# mkdir /etc/mail/certs
-.Ed
+.Pp
+.Dl # mkdir /etc/mail/certs
 .Pp
 Next, you must generate a
 .Ar DSA
 parameter set with a command like the following:
-.Bd -literal -offset indent -width Ds
-# openssl dsaparam 1024 -out dsa1024.pem
-.Ed
+.Pp
+.Dl # openssl dsaparam 1024 -out dsa1024.pem
 .Pp
 This would generate
 .Ar DSA
@@ -98,8 +96,8 @@ Once you have the
 .Ar DSA
 parameters generated, you can generate a certificate
 and unencrypted private key using the command:
-.Bd -literal -offset indent -width Ds
-# openssl req -x509 -nodes -days 365 -newkey dsa:dsa1024.pem \\
+.Bd -literal -offset indent
+# openssl req -x509 -nodes -days 365 -newkey dsa:dsa1024.pem \e
   -out /etc/mail/certs/mycert.pem -keyout /etc/mail/certs/mykey.pem
 .Ed
 .Pp
@@ -116,17 +114,15 @@ will be unable to initiate TLS server functions.
 .Pp
 You can verify that the newly-generated certificate has correct information
 with the following command:
-.Bd -literal -offset indent -width Ds
-# openssl x509 -in /etc/mail/certs/mycert.pem -text
-.Ed
+.Pp
+.Dl # openssl x509 -in /etc/mail/certs/mycert.pem -text
 .Pp
 If don't intend to use TLS for authentication (and if you are using
 self-signed certificates you probably don't) you can simply link
 your new key to
 .Pa CAcert.pem .
-.Bd -literal -offset indent -width Ds
-# ln -s /etc/mail/certs/mycert.pem /etc/mail/certs/CAcert.pem
-.Ed
+.Pp
+.Dl # ln -s /etc/mail/certs/mycert.pem /etc/mail/certs/CAcert.pem
 .Pp
 If, on the other hand, you intend to use TLS for authentication
 you should install your certificate authority bundle as
@@ -135,9 +131,8 @@ you should install your certificate authority bundle as
 At this point, you no longer need the
 .Pa dsa1024.pem
 file and it can be removed.
-.Bd -literal -offset indent -width Ds
-# rm dsa1024.pem
-.Ed
+.Pp
+.Dl # rm dsa1024.pem
 .Pp
 Because the private key files are unencrypted,
 .Xr sendmail 8
@@ -145,15 +140,14 @@ is picky about using tight permissions on those files.
 The certificate directory and the files therein should be
 readable and writable only by the owner (root).
 A simple way to ensure this is to run the following:
-.Bd -literal -offset indent -width Ds
-# chmod -R go-rwx /etc/mail/certs
-.Ed
+.Pp
+.Dl # chmod -R go-rwx /etc/mail/certs
 .Ss Creating a certificate with an existing private key
 This example assumes you already have an existing private key,
 .Pa /etc/mail/certs/mykey.pem .
 You can generate a new certificate based on this key using the command:
-.Bd -literal -offset indent -width Ds
-# openssl req -x509 -new -days 365 -key /etc/mail/certs/mykey.pem \\
+.Bd -literal -offset indent
+# openssl req -x509 -new -days 365 -key /etc/mail/certs/mykey.pem \e
   -out /etc/mail/certs/mycert.pem
 # chmod 600 /etc/mail/certs/mycert.pem
 .Ed
@@ -173,7 +167,7 @@ is available as
 .Pp
 The pertinent options are:
 .Pp
-.Bl -bullet -literal -compact
+.Bl -bullet -compact
 .It
 CERT_DIR
 .It
@@ -207,7 +201,7 @@ You will need to make TLS-enabled versions of the following files:
 .Pa openbsd-proto.mc
 and
 .Pa openbsd-localhost.mc .
-.Bd -literal -offset indent -width Ds
+.Bd -literal -offset indent
 # cd /usr/share/sendmail/cf
 
 # cp openbsd-proto.mc openbsd-proto-tls.mc
@@ -224,7 +218,7 @@ definition (the actual placement within the file is not critical as long
 as it is after the
 .Dq divert(0)dnl
 line).
-.Bd -literal -offset indent -width Ds
+.Bd -literal -offset indent
 define(`CERT_DIR',        `MAIL_SETTINGS_DIR`'certs')
 define(`confCACERT_PATH', `CERT_DIR')
 define(`confCACERT',      `CERT_DIR/CAcert.pem')
@@ -238,7 +232,7 @@ Now that you have the TLS-enabled versions of the .mc files
 you must generate .cf files from them and install the .cf
 files in
 .Pa /etc/mail .
-.Bd -literal -offset indent -width Ds
+.Bd -literal -offset indent
 # make openbsd-proto-tls.cf openbsd-localhost-tls.cf
 
 # cp openbsd-proto-tls.cf /etc/mail/sendmail.cf
@@ -248,9 +242,8 @@ files in
 Finally, restart sendmail with the new configuration by sending
 it a
 .Dv SIGHUP .
-.Bd -literal -offset indent -width Ds
-# kill -HUP `head -1 /var/run/sendmail.pid`
-.Ed
+.Pp
+.Dl # kill -HUP `head -1 /var/run/sendmail.pid`
 .Pp
 Note that those are backticks and not single quotes in the example above.
 .Pp
@@ -260,7 +253,7 @@ transactions, STARTTLS.
 You can test this by connecting to the local host and issuing the
 .Dq EHLO
 command.
-.Bd -literal -offset indent -width Ds
+.Bd -literal -offset indent
 # telnet localhost 25
 Trying ::1...
 Connected to localhost.
@@ -272,7 +265,7 @@ EHLO localhost
 After typing
 .Em EHLO localhost
 you should receive something like the following back.
-.Bd -literal -offset indent -width Ds
+.Bd -literal -offset indent
 250-localhost Hello localhost [IPv6:::1], pleased to meet you
 250-ENHANCEDSTATUSCODES
 250-PIPELINING
@@ -327,15 +320,13 @@ the strength of the encryption (in the macro {cipher_bits})
 VERIFY can also accept the argument for {cipher_bits}.
 Here are a few example entries that illustrate these features, and
 the role based granularity as well:
-.\" XXX - clean this up
-.Bl -tag -width Ds
-.It "Force strong (112 bit) encryption for communications for this server:"
-.sp
-.Li server1.example.net             ENCR:112
-.It "For a TLS client, force string verification depths to at least 80 bits:"
-.sp
-.Li TLS_Clt:desktop.example:net     VERIFY:80
-.El
+.Pp
+Force strong (112 bit) encryption for communications for this server:
+.Pp
+.D1 server1.example.net	ENCR:112
+.Pp
+For a TLS client, force string verification depths to at least 80 bits:
+.D1 TLS_Clt:desktop.example:net VERIFY:80
 .Pp
 Much more complicated access maps are possible, and error conditions (such
 as permanent or temporary, PERM+ or TEMP+) can be set on the basis of
@@ -385,8 +376,7 @@ Lastly, interoperability problems can appear between different implementations.
 .Xr ssl 8
 .Pp
 .Tn DARPA
-Internet Request for Comments
-.Tn RFC2487
+Internet Request for Comments RFC 2487
 .Pp
 http://www.sendmail.org/~ca/email/starttls.html
 .Sh HISTORY