Adaption to new bus.h from NetBSD. Various driver has been updated to

NetBSD 961107 state.  Other has not, partly because sometimes the bus.h
changes was coupled with other changes.

2 files changed, 0 insertions, 2485 deletions

diff --git a/sys/arch/arc/dev/ace.c b/sys/arch/arc/dev/ace.c
deleted file mode 100644
index f5e22feb9a9..00000000000
--- a/sys/arch/arc/dev/ace.c
+++ /dev/null
@@ -1,1810 +0,0 @@
-/*	$OpenBSD: ace.c,v 1.7 1996/11/12 20:29:53 niklas Exp $	*/
-/*	$NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $	*/
-
-/*-
- * Copyright (c) 1993, 1994, 1995, 1996
- *	Charles M. Hannum.  All rights reserved.
- * Copyright (c) 1991 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)com.c	7.5 (Berkeley) 5/16/91
- */
-
-/*
- * ACE driver, based on HP dca driver
- * uses National Semiconductor NS16450/NS16550AF UART
- */
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/ioctl.h>
-#include <sys/select.h>
-#include <sys/tty.h>
-#include <sys/proc.h>
-#include <sys/user.h>
-#include <sys/conf.h>
-#include <sys/file.h>
-#include <sys/uio.h>
-#include <sys/kernel.h>
-#include <sys/syslog.h>
-#include <sys/types.h>
-#include <sys/device.h>
-
-#include <arc/arc/arctype.h>
-#include <machine/bus.old.h>
-#include <machine/intr.h>
-
-#include <dev/isa/isavar.h>
-#include <dev/isa/comreg.h>
-#include <dev/isa/comvar.h>
-#include <dev/ic/ns16550reg.h>
-#ifdef COM_HAYESP
-#include <dev/ic/hayespreg.h>
-#endif
-#define	com_lcr	com_cfcr
-
-#include "ace.h"
-
-
-#define	COM_IBUFSIZE	(2 * 512)
-#define	COM_IHIGHWATER	((3 * COM_IBUFSIZE) / 4)
-
-struct com_softc {
-	struct device sc_dev;
-	void *sc_ih;
-	bus_chipset_tag_t sc_bc;
-	struct tty *sc_tty;
-
-	int sc_overflows;
-	int sc_floods;
-	int sc_errors;
-
-	int sc_halt;
-
-	int sc_iobase;
-#ifdef COM_HAYESP
-	int sc_hayespbase;
-#endif
-
-	bus_io_handle_t sc_ioh;
-	bus_io_handle_t sc_hayespioh;
-
-	u_char sc_hwflags;
-#define	COM_HW_NOIEN	0x01
-#define	COM_HW_FIFO	0x02
-#define	COM_HW_HAYESP	0x04
-#define	COM_HW_ABSENT_PENDING	0x08	/* reattached, awaiting close/reopen */
-#define	COM_HW_ABSENT	0x10		/* configure actually failed, or removed */
-#define	COM_HW_REATTACH	0x20		/* reattaching */
-#define	COM_HW_CONSOLE	0x40
-	u_char sc_swflags;
-#define	COM_SW_SOFTCAR	0x01
-#define	COM_SW_CLOCAL	0x02
-#define	COM_SW_CRTSCTS	0x04
-#define	COM_SW_MDMBUF	0x08
-	u_char sc_msr, sc_mcr, sc_lcr, sc_ier;
-	u_char sc_dtr;
-
-	u_char	sc_cua;
-
-	u_char *sc_ibuf, *sc_ibufp, *sc_ibufhigh, *sc_ibufend;
-	u_char sc_ibufs[2][COM_IBUFSIZE];
-};
-
-#ifdef COM_HAYESP
-int comprobeHAYESP __P((bus_io_handle_t hayespioh, struct com_softc *sc));
-#endif
-void	comdiag		__P((void *));
-int	comspeed	__P((long));
-int	comparam	__P((struct tty *, struct termios *));
-void	comstart	__P((struct tty *));
-void	compoll		__P((void *));
-
-/* XXX: These belong elsewhere */
-cdev_decl(com);
-bdev_decl(com);
-
-struct consdev;
-void	acecnprobe	__P((struct consdev *));
-void	acecninit	__P((struct consdev *));
-int	acecngetc	__P((dev_t));
-void	acecnputc	__P((dev_t, int));
-void	acecnpollc	__P((dev_t, int));
-
-static u_char tiocm_xxx2mcr __P((int));
-
-/*
- * XXX the following two cfattach structs should be different, and possibly
- * XXX elsewhere.
- */
-int	comprobe __P((struct device *, void *, void *));
-void	comattach __P((struct device *, struct device *, void *));
-void	com_absent_notify __P((struct com_softc *sc));
-void	comstart_pending __P((void *));
-
-#if NACE_ISA
-struct cfattach ace_isa_ca = {
-	sizeof(struct com_softc), comprobe, comattach
-};
-#endif
-
-#if NACE_COMMULTI
-struct cfattach ace_commulti_ca = {
-	sizeof(struct com_softc), comprobe, comattach
-};
-#endif
-
-#if NACE_PICA
-#undef  CONADDR         /* This is stupid but using devs before config .. */
-#define CONADDR 0xe0006000
-
-struct cfattach ace_pica_ca = {
-	sizeof(struct com_softc), comprobe, comattach
-};
-#endif
-
-
-struct cfdriver ace_cd = {
-	NULL, "ace", DV_TTY
-};
-
-void cominit __P((bus_chipset_tag_t, bus_io_handle_t, int));
-
-#ifndef CONSPEED
-#define	CONSPEED B9600
-#endif
-
-#ifdef COMCONSOLE
-int	comdefaultrate = CONSPEED;		/* XXX why set default? */
-#else
-int	comdefaultrate = TTYDEF_SPEED;
-#endif
-int	comconsaddr;
-int	comconsinit;
-int	comconsattached;
-bus_chipset_tag_t comconsbc;
-bus_io_handle_t comconsioh;
-tcflag_t comconscflag = TTYDEF_CFLAG;
-
-int	commajor;
-int	comsopen = 0;
-int	comevents = 0;
-
-#ifdef KGDB
-#include <machine/remote-sl.h>
-extern int kgdb_dev;
-extern int kgdb_rate;
-extern int kgdb_debug_init;
-#endif
-
-#define	DEVUNIT(x)	(minor(x) & 0x7f)
-#define	DEVCUA(x)	(minor(x) & 0x80)
-
-/* Macros to clear/set/test flags. */
-#define	SET(t, f)	(t) |= (f)
-#define	CLR(t, f)	(t) &= ~(f)
-#define	ISSET(t, f)	((t) & (f))
-
-#if NACE_PCMCIA
-#include <dev/pcmcia/pcmciavar.h>
-
-int	com_pcmcia_match __P((struct device *, void *, void *));
-void	com_pcmcia_attach __P((struct device *, struct device *, void *));
-int	com_pcmcia_detach __P((struct device *));
-
-struct cfattach ace_pcmcia_ca = {
-	sizeof(struct com_softc), com_pcmcia_match, comattach,
-	com_pcmcia_detach
-};
-
-int	com_pcmcia_mod __P((struct pcmcia_link *pc_link, struct device *self,
-	    struct pcmcia_conf *pc_cf, struct cfdata *cf));
-
-/* additional setup needed for pcmcia devices */
-/* modify config entry */
-int 
-com_pcmcia_mod(pc_link, self, pc_cf, cf)
-    struct pcmcia_link *pc_link;
-    struct device *self;
-    struct pcmcia_conf *pc_cf; 
-    struct cfdata *cf;
-{               
-    int err; 
-    struct pcmciadevs *dev = pc_link->device;
-    struct ed_softc *sc = (void *)self; 
-    if (!(err = PCMCIA_BUS_CONFIG(pc_link->adapter, pc_link, self,
-				  pc_cf, cf))) {
-        pc_cf->memwin = 0;
-	if (pc_cf->cfgtype == 0) 
-	    pc_cf->cfgtype = CFGENTRYID; /* determine from ioaddr */
-    }
-    return err;
-}
-
-int com_pcmcia_isa_attach __P((struct device *, void *, void *,
-			       struct pcmcia_link *));
-int com_pcmcia_remove __P((struct pcmcia_link *, struct device *));
-
-static struct pcmcia_com {
-    struct pcmcia_device pcd;
-} pcmcia_com =  {
-    {"PCMCIA Modem card", com_pcmcia_mod, com_pcmcia_isa_attach,
-     NULL, com_pcmcia_remove}
-};          
-
-
-struct pcmciadevs pcmcia_com_devs[] = {
-  { "com", 0,
-  NULL, "*MODEM*", NULL, NULL,
-  NULL, (void *)&pcmcia_com 
-  },
-  { "com", 0,
-  NULL, NULL, "*MODEM*", NULL,
-  NULL, (void *)&pcmcia_com 
-  },
-  { "com", 0,
-  NULL, NULL, NULL, "*MODEM*",
-  NULL, (void *)&pcmcia_com 
-  },
-  {NULL}
-};
-#define ncom_pcmcia_devs sizeof(pcmcia_com_devs)/sizeof(pcmcia_com_devs[0])
-
-int
-com_pcmcia_match(parent, match, aux)
-	struct device *parent;
-	void *match, *aux;
-{
-	return pcmcia_slave_match(parent, match, aux, pcmcia_com_devs,
-				  ncom_pcmcia_devs);
-}
-
-int
-com_pcmcia_isa_attach(parent, match, aux, pc_link)
-	struct device *parent;
-	void *match;
-	void *aux;
-	struct pcmcia_link *pc_link;
-{
-	struct isa_attach_args *ia = aux;
-	struct com_softc *sc = match;
-
-	int rval;
-	if (rval = comprobe(parent, sc->sc_dev.dv_cfdata, ia)) {
-		if (ISSET(pc_link->flags, PCMCIA_REATTACH)) {
-#ifdef COM_DEBUG
-			printf("comreattach, hwflags=%x\n", sc->sc_hwflags);
-#endif
-			sc->sc_hwflags = COM_HW_REATTACH |
-				(sc->sc_hwflags & (COM_HW_ABSENT_PENDING|COM_HW_CONSOLE));
-		} else
-			sc->sc_hwflags = 0;
-	}
-	return rval;
-}
-
-
-/*
- * Called by config_detach attempts, shortly after com_pcmcia_remove
- * was called.
- */
-int
-com_pcmcia_detach(self)
-	struct device *self;
-{
-	struct com_softc *sc = (void *)self;
-
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT_PENDING)) {
-		/* don't let it really be detached, it is still open */
-		return EBUSY;
-	}
-	return 0;		/* OK! */
-}
-
-/*
- * called by pcmcia framework to accept/reject remove attempts.
- * If we return 0, then the detach will proceed.
- */
-int
-com_pcmcia_remove(pc_link, self)
-	struct pcmcia_link *pc_link;
-	struct device *self;
-{
-	struct com_softc *sc = (void *)self;
-	struct tty *tp;
-	int s;
-
-	if (!sc->sc_tty)
-		goto ok;
-	tp = sc->sc_tty;
-
-	/* not in use ?  if so, return "OK" */
-	if (!ISSET(tp->t_state, TS_ISOPEN) &&
-	    !ISSET(tp->t_state, TS_WOPEN)) {
-		ttyfree(sc->sc_tty);
-		sc->sc_tty = NULL;
-    ok:
-		isa_intr_disestablish(sc->sc_bc, sc->sc_ih);
-		sc->sc_ih = NULL;
-		SET(sc->sc_hwflags, COM_HW_ABSENT);
-		return 0;		/* OK! */
-	}
-	/*
-	 * Not easily removed.  Put device into a dead state, clean state
-	 * as best we can.  notify all waiters.
-	 */
-	SET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING);
-#ifdef COM_DEBUG
-	printf("pending detach flags %x\n", sc->sc_hwflags);
-#endif
-
-	s = spltty();
-	com_absent_notify(sc);
-	splx(s);
-
-	return 0;
-}
-
-#if 0
-void
-com_pcmcia_attach(parent, self, aux)
-	struct device *parent, *self;
-	void *aux;
-{
-	struct pcmcia_attach_args *paa = aux;
-	
-	printf("com_pcmcia_attach %p %p %p\n", parent, self, aux);
-	delay(2000000);
-	if (!pcmcia_configure(parent, self, paa->paa_link)) {
-		struct com_softc *sc = (void *)self;
-		sc->sc_hwflags |= COM_HW_ABSENT;
-		printf(": not attached\n");
-	}
-}
-#endif
-#endif
-
-/*
- * must be called at spltty() or higher.
- */
-void
-com_absent_notify(sc)
-	struct com_softc *sc;
-{
-	struct tty *tp = sc->sc_tty;
-
-	if (tp) {
-		CLR(tp->t_state, TS_CARR_ON|TS_BUSY);
-		ttyflush(tp, FREAD|FWRITE);
-	}
-}
-
-int
-comspeed(speed)
-	long speed;
-{
-#define	divrnd(n, q)	(((n)*2/(q)+1)/2)	/* divide and round off */
-
-	int x, err;
-
-	if (speed == 0)
-		return 0;
-	if (speed < 0)
-		return -1;
-	x = divrnd((COM_FREQ / 16), speed);
-	if (x <= 0)
-		return -1;
-	err = divrnd((COM_FREQ / 16) * 1000, speed * x) - 1000;
-	if (err < 0)
-		err = -err;
-	if (err > COM_TOLERANCE)
-		return -1;
-	return x;
-
-#undef	divrnd(n, q)
-}
-
-int
-comprobe1(bc, ioh, iobase)
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	int iobase;
-{
-	int i, k;
-
-	/* force access to id reg */
-	bus_io_write_1(bc, ioh, com_lcr, 0);
-	bus_io_write_1(bc, ioh, com_iir, 0);
-	for (i = 0; i < 32; i++) {
-	    k = bus_io_read_1(bc, ioh, com_iir);
-	    if (k & 0x38) {
-		bus_io_read_1(bc, ioh, com_data); /* cleanup */
-	    } else
-		break;
-	}
-	if (i >= 32) 
-	    return 0;
-
-	return 1;
-}
-
-#ifdef COM_HAYESP
-int
-comprobeHAYESP(hayespioh, sc)
-	bus_io_handle_t hayespioh;
-	struct com_softc *sc;
-{
-	char	val, dips;
-	int	combaselist[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
-	bus_chipset_tag_t bc = sc->sc_bc;
-
-	/*
-	 * Hayes ESP cards have two iobases.  One is for compatibility with
-	 * 16550 serial chips, and at the same ISA PC base addresses.  The
-	 * other is for ESP-specific enhanced features, and lies at a
-	 * different addressing range entirely (0x140, 0x180, 0x280, or 0x300).
-	 */
-
-	/* Test for ESP signature */
-	if ((bus_io_read_1(bc, hayespioh, 0) & 0xf3) == 0)
-		return 0;
-
-	/*
-	 * ESP is present at ESP enhanced base address; unknown com port
-	 */
-
-	/* Get the dip-switch configurations */
-	bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_GETDIPS);
-	dips = bus_io_read_1(bc, hayespioh, HAYESP_STATUS1);
-
-	/* Determine which com port this ESP card services: bits 0,1 of  */
-	/*  dips is the port # (0-3); combaselist[val] is the com_iobase */
-	if (sc->sc_iobase != combaselist[dips & 0x03])
-		return 0;
-
-	printf(": ESP");
-
- 	/* Check ESP Self Test bits. */
-	/* Check for ESP version 2.0: bits 4,5,6 == 010 */
-	bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_GETTEST);
-	val = bus_io_read_1(bc, hayespioh, HAYESP_STATUS1); /* Clear reg 1 */
-	val = bus_io_read_1(bc, hayespioh, HAYESP_STATUS2);
-	if ((val & 0x70) < 0x20) {
-		printf("-old (%o)", val & 0x70);
-		/* we do not support the necessary features */
-		return 0;
-	}
-
-	/* Check for ability to emulate 16550: bit 8 == 1 */
-	if ((dips & 0x80) == 0) {
-		printf(" slave");
-		/* XXX Does slave really mean no 16550 support?? */
-		return 0;
-	}
-
-	/*
-	 * If we made it this far, we are a full-featured ESP v2.0 (or
-	 * better), at the correct com port address.
-	 */
-
-	SET(sc->sc_hwflags, COM_HW_HAYESP);
-	printf(", 1024 byte fifo\n");
-	return 1;
-}
-#endif
-
-int
-comprobe(parent, match, aux)
-	struct device *parent;
-	void *match, *aux;
-{
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	int iobase, needioh;
-	int rv = 1;
-
-#if NACE_ISA || NACE_PCMCIA
-#define IS_ISA(parent) \
-	(!strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa") || \
-	 !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "pcmcia"))
-#elif NACE_ISA
-#define IS_ISA(parent) \
-	!strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa")
-#endif
-#if NACE_PICA
-#define IS_PICA(parent) \
-	!strcmp((parent)->dv_cfdata->cf_driver->cd_name, "pica")
-#endif
-	/*
-	 * XXX should be broken out into functions for isa probe and
-	 * XXX for commulti probe, with a helper function that contains
-	 * XXX most of the interesting stuff.
-	 */
-#if NACE_ISA || NACE_PCMCIA
-	if (IS_ISA(parent)) {
-		struct isa_attach_args *ia = aux;
-
-		bc = ia->ia_bc;
-		iobase = ia->ia_iobase;
-		needioh = 1;
-	} else
-#endif
-#if NACE_PICA
-	if(IS_PICA(parent)) {
-		struct confargs *ca = aux;
-		if(!BUS_MATCHNAME(ca, "com"))
-			return(0);
-		iobase = (long)BUS_CVTADDR(ca);
-		bc = 0;
-		needioh = 1;
-	} else
-#endif
-#if NACE_COMMULTI
-	if (1) {
-		struct cfdata *cf = match;
-		struct commulti_attach_args *ca = aux;
- 
-		if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ca->ca_slave)
-			return (0);
-
-		bc = ca->ca_bc;
-		iobase = ca->ca_iobase;
-		ioh = ca->ca_ioh;
-		needioh = 0;
-	} else
-#endif
-		return(0);			/* This cannot happen */
-
-	/* if it's in use as console, it's there. */
-	if (iobase == comconsaddr && !comconsattached)
-		goto out;
-
-	if (needioh && bus_io_map(bc, iobase, COM_NPORTS, &ioh)) {
-		rv = 0;
-		goto out;
-	}
-	rv = comprobe1(bc, ioh, iobase);
-	if (needioh)
-		bus_io_unmap(bc, ioh, COM_NPORTS);
-
-out:
-#if NACE_ISA || NACE_PCMCIA
-	if (rv && IS_ISA(parent)) {
-		struct isa_attach_args *ia = aux;
-
-		ia->ia_iosize = COM_NPORTS;
-		ia->ia_msize = 0;
-	}
-#endif
-	return (rv);
-}
-
-void
-comattach(parent, self, aux)
-	struct device *parent, *self;
-	void *aux;
-{
-	struct com_softc *sc = (void *)self;
-	int iobase, irq;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-#ifdef COM_HAYESP
-	int	hayesp_ports[] = { 0x140, 0x180, 0x280, 0x300, 0 };
-	int	*hayespp;
-#endif
-
-	/*
-	 * XXX should be broken out into functions for isa attach and
-	 * XXX for commulti attach, with a helper function that contains
-	 * XXX most of the interesting stuff.
-	 */
-	if (ISSET(sc->sc_hwflags, COM_HW_REATTACH)) {
-		int s;
-		s = spltty();
-		com_absent_notify(sc);
-		splx(s);
-	} else
-	    sc->sc_hwflags = 0;
-	sc->sc_swflags = 0;
-#if NACE_ISA || NACE_PCMCIA
-	if (IS_ISA(parent)) {
-		struct isa_attach_args *ia = aux;
-
-		/*
-		 * We're living on an isa.
-		 */
-		iobase = ia->ia_iobase;
-		bc = ia->ia_bc;
-	        if (iobase != comconsaddr) {
-	                if (bus_io_map(bc, iobase, COM_NPORTS, &ioh))
-				panic("comattach: io mapping failed");
-		} else
-	                ioh = comconsioh;
-		irq = ia->ia_irq;
-	} else
-#endif
-#if NACE_PICA
-	if(IS_PICA(parent)) {
-		struct confargs *ca = aux;
-		iobase = (long)BUS_CVTADDR(ca);
-		bc = 0;
-		irq = 0;
-		ioh = iobase;
-	} else
-#endif
-#if NACE_COMMULTI
-	if (1) {
-		struct commulti_attach_args *ca = aux;
-
-		/*
-		 * We're living on a commulti.
-		 */
-		iobase = ca->ca_iobase;
-		bc = ca->ca_bc;
-		ioh = ca->ca_ioh;
-		irq = IRQUNK;
-
-		if (ca->ca_noien)
-			SET(sc->sc_hwflags, COM_HW_NOIEN);
-	} else
-#endif
-		panic("comattach: impossible");
-
-	sc->sc_bc = bc;
-	sc->sc_ioh = ioh;
-	sc->sc_iobase = iobase;
-
-	if (iobase == comconsaddr) {
-		comconsattached = 1;
-
-		/* 
-		 * Need to reset baud rate, etc. of next print so reset
-		 * comconsinit.  Also make sure console is always "hardwired".
-		 */
-		delay(1000);			/* wait for output to finish */
-		comconsinit = 0;
-		SET(sc->sc_hwflags, COM_HW_CONSOLE);
-		SET(sc->sc_swflags, COM_SW_SOFTCAR);
-	}
-
-#ifdef COM_HAYESP
-	/* Look for a Hayes ESP board. */
-	for (hayespp = hayesp_ports; *hayespp != 0; hayespp++) {
-		bus_io_handle_t hayespioh;
-
-#define	HAYESP_NPORTS	8			/* XXX XXX XXX ??? ??? ??? */
-		if (bus_io_map(bc, *hayespp, HAYESP_NPORTS, &hayespioh))
-			continue;
-		if (comprobeHAYESP(hayespioh, sc)) {
-			sc->sc_hayespbase = *hayespp;
-			sc->sc_hayespioh = hayespioh;
-			break;
-		}
-		bus_io_unmap(bc, hayespioh, HAYESP_NPORTS);
-	}
-	/* No ESP; look for other things. */
-	if (*hayespp == 0) {
-#endif
-
-	/* look for a NS 16550AF UART with FIFOs */
-	bus_io_write_1(bc, ioh, com_fifo,
-	    FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14);
-	delay(100);
-	if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_FIFO_MASK) ==
-	    IIR_FIFO_MASK)
-		if (ISSET(bus_io_read_1(bc, ioh, com_fifo), FIFO_TRIGGER_14) ==
-		    FIFO_TRIGGER_14) {
-			SET(sc->sc_hwflags, COM_HW_FIFO);
-			printf(": ns16550a, working fifo\n");
-		} else
-			printf(": ns16550, broken fifo\n");
-	else
-		printf(": ns8250 or ns16450, no fifo\n");
-	bus_io_write_1(bc, ioh, com_fifo, 0);
-#ifdef COM_HAYESP
-	}
-#endif
-
-	/* disable interrupts */
-	bus_io_write_1(bc, ioh, com_ier, 0);
-	bus_io_write_1(bc, ioh, com_mcr, 0);
-
-	if (irq != IRQUNK) {
-#if NACE_ISA || NACE_PCMCIA
-		if (IS_ISA(parent)) {
-			struct isa_attach_args *ia = aux;
-
-			sc->sc_ih = isa_intr_establish(ia->ia_ic, irq,
-			    IST_EDGE, IPL_TTY, comintr, sc,
-			    sc->sc_dev.dv_xname);
-		} else
-#endif
-#if NACE_PICA
-		if (IS_PICA(parent)) {
-			struct confargs *ca = aux;
-			BUS_INTR_ESTABLISH(ca, comintr, (void *)(long)sc);
-		} else
-#endif
-			panic("comattach: IRQ but can't have one");
-	}
-
-#ifdef KGDB
-	if (kgdb_dev == makedev(commajor, unit)) {
-		if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
-			kgdb_dev = -1;	/* can't debug over console port */
-		else {
-			cominit(bc, ioh, kgdb_rate);
-			if (kgdb_debug_init) {
-				/*
-				 * Print prefix of device name,
-				 * let kgdb_connect print the rest.
-				 */
-				printf("%s: ", sc->sc_dev.dv_xname);
-				kgdb_connect(1);
-			} else
-				printf("%s: kgdb enabled\n",
-				    sc->sc_dev.dv_xname);
-		}
-	}
-#endif
-
-	/* XXX maybe move up some? */
-	if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
-		printf("%s: console\n", sc->sc_dev.dv_xname);
-}
-
-int
-aceopen(dev, flag, mode, p)
-	dev_t dev;
-	int flag, mode;
-	struct proc *p;
-{
-	int unit = DEVUNIT(dev);
-	struct com_softc *sc;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	struct tty *tp;
-	int s;
-	int error = 0;
- 
-	if (unit >= ace_cd.cd_ndevs)
-		return ENXIO;
-	sc = ace_cd.cd_devs[unit];
-	if (!sc || ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING))
-		return ENXIO;
-
-	s = spltty();
-	if (!sc->sc_tty) {
-		tp = sc->sc_tty = ttymalloc();
-		tty_attach(tp);
-	} else
-		tp = sc->sc_tty;
-	splx(s);
-
-	tp->t_oproc = comstart;
-	tp->t_param = comparam;
-	tp->t_dev = dev;
-	if (!ISSET(tp->t_state, TS_ISOPEN)) {
-		SET(tp->t_state, TS_WOPEN);
-		ttychars(tp);
-		tp->t_iflag = TTYDEF_IFLAG;
-		tp->t_oflag = TTYDEF_OFLAG;
-		if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
-			tp->t_cflag = comconscflag;
-		else
-			tp->t_cflag = TTYDEF_CFLAG;
-		if (ISSET(sc->sc_swflags, COM_SW_CLOCAL))
-			SET(tp->t_cflag, CLOCAL);
-		if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS))
-			SET(tp->t_cflag, CRTSCTS);
-		if (ISSET(sc->sc_swflags, COM_SW_MDMBUF))
-			SET(tp->t_cflag, MDMBUF);
-		tp->t_lflag = TTYDEF_LFLAG;
-		tp->t_ispeed = tp->t_ospeed = comdefaultrate;
-
-		s = spltty();
-
-		comparam(tp, &tp->t_termios);
-		ttsetwater(tp);
-
-		if (comsopen++ == 0)
-			timeout(compoll, NULL, 1);
-
-		sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0];
-		sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
-		sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
-
-		bc = sc->sc_bc;
-		ioh = sc->sc_ioh;
-#ifdef COM_HAYESP
-		/* Setup the ESP board */
-		if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) {
-			bus_io_handle_t hayespioh = sc->sc_hayespioh;
-
-			bus_io_write_1(bc, ioh, com_fifo,
-			     FIFO_DMA_MODE|FIFO_ENABLE|
-			     FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER_8);
-
-			/* Set 16550 compatibility mode */
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETMODE);
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2, 
-			     HAYESP_MODE_FIFO|HAYESP_MODE_RTS|
-			     HAYESP_MODE_SCALE);
-
-			/* Set RTS/CTS flow control */
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETFLOWTYPE);
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2, HAYESP_FLOW_RTS);
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2, HAYESP_FLOW_CTS);
-
-			/* Set flow control levels */
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETRXFLOW);
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2, 
-			     HAYESP_HIBYTE(HAYESP_RXHIWMARK));
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2,
-			     HAYESP_LOBYTE(HAYESP_RXHIWMARK));
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2,
-			     HAYESP_HIBYTE(HAYESP_RXLOWMARK));
-			bus_io_write_1(bc, hayespioh, HAYESP_CMD2,
-			     HAYESP_LOBYTE(HAYESP_RXLOWMARK));
-		} else
-#endif
-		if (ISSET(sc->sc_hwflags, COM_HW_FIFO))
-			/* Set the FIFO threshold based on the receive speed. */
-			bus_io_write_1(bc, ioh, com_fifo,
-			    FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST |
-			    (tp->t_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
-		/* flush any pending I/O */
-		while (ISSET(bus_io_read_1(bc, ioh, com_lsr), LSR_RXRDY))
-			(void) bus_io_read_1(bc, ioh, com_data);
-		/* you turn me on, baby */
-		sc->sc_mcr = MCR_DTR | MCR_RTS;
-		if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN))
-			SET(sc->sc_mcr, MCR_IENABLE);
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC;
-		bus_io_write_1(bc, ioh, com_ier, sc->sc_ier);
-
-		sc->sc_msr = bus_io_read_1(bc, ioh, com_msr);
-		if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) || DEVCUA(dev) ||
-		    ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF))
-			SET(tp->t_state, TS_CARR_ON);
-		else
-			CLR(tp->t_state, TS_CARR_ON);
-	} else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0)
-		return EBUSY;
-	else
-		s = spltty();
-
-	if (DEVCUA(dev)) {
-		if (ISSET(tp->t_state, TS_ISOPEN)) {
-			/* Ah, but someone already is dialed in... */
-			splx(s);
-			return EBUSY;
-		}
-		sc->sc_cua = 1;		/* We go into CUA mode */
-	}
-
-	/* wait for carrier if necessary */
-	if (ISSET(flag, O_NONBLOCK)) {
-		if (!DEVCUA(dev) && sc->sc_cua) {
-			/* Opening TTY non-blocking... but the CUA is busy */
-			splx(s);
-			return EBUSY;
-		}
-	} else {
-		while (!(DEVCUA(dev) && sc->sc_cua) &&
-		    !ISSET(tp->t_cflag, CLOCAL) &&
-		    !ISSET(tp->t_state, TS_CARR_ON)) {
-			SET(tp->t_state, TS_WOPEN);
-			error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH,
-			    ttopen, 0);
-			if (error) {
-				/* XXX should turn off chip if we're the
-				   only waiter */
-				if (DEVCUA(dev))
-					sc->sc_cua = 0;
-				splx(s);
-				return error;
-			}
-		}
-	}
-	splx(s);
-
-	return (*linesw[tp->t_line].l_open)(dev, tp);
-}
- 
-int
-aceclose(dev, flag, mode, p)
-	dev_t dev;
-	int flag, mode;
-	struct proc *p;
-{
-	int unit = DEVUNIT(dev);
-	struct com_softc *sc = ace_cd.cd_devs[unit];
-	struct tty *tp = sc->sc_tty;
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	int s;
-
-	/* XXX This is for cons.c. */
-	if (!ISSET(tp->t_state, TS_ISOPEN))
-		return 0;
-
-	(*linesw[tp->t_line].l_close)(tp, flag);
-	s = spltty();
-	if (!ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		/* can't do any of this stuff .... */
-		CLR(sc->sc_lcr, LCR_SBREAK);
-		bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr);
-		bus_io_write_1(bc, ioh, com_ier, 0);
-		if (ISSET(tp->t_cflag, HUPCL) &&
-		    !ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) {
-			/* XXX perhaps only clear DTR */
-			bus_io_write_1(bc, ioh, com_mcr, 0);
-		}
-	}
-	CLR(tp->t_state, TS_BUSY | TS_FLUSH);
-	if (--comsopen == 0)
-		untimeout(compoll, NULL);
-	sc->sc_cua = 0;
-	splx(s);
-	ttyclose(tp);
-#ifdef COM_DEBUG
-	/* mark it ready for more use if reattached earlier */
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT_PENDING)) {
-	    printf("aceclose pending cleared\n");
-	}
-#endif
-	CLR(sc->sc_hwflags, COM_HW_ABSENT_PENDING);
-
-#ifdef notyet /* XXXX */
-	if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
-		ttyfree(tp);
-		sc->sc_tty = 0;
-	}
-#endif
-	return 0;
-}
- 
-int
-aceread(dev, uio, flag)
-	dev_t dev;
-	struct uio *uio;
-	int flag;
-{
-	struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)];
-	struct tty *tp = sc->sc_tty;
- 
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		int s = spltty();
-		com_absent_notify(sc);
-		splx(s);
-		return EIO;
-	}
-
-	return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
-}
- 
-int
-acewrite(dev, uio, flag)
-	dev_t dev;
-	struct uio *uio;
-	int flag;
-{
-	struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)];
-	struct tty *tp = sc->sc_tty;
- 
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		int s = spltty();
-		com_absent_notify(sc);
-		splx(s);
-		return EIO;
-	}
-
-	return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
-}
-
-struct tty *
-acetty(dev)
-	dev_t dev;
-{
-	struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)];
-	struct tty *tp = sc->sc_tty;
-
-	return (tp);
-}
- 
-static u_char
-tiocm_xxx2mcr(data)
-	int data;
-{
-	u_char m = 0;
-
-	if (ISSET(data, TIOCM_DTR))
-		SET(m, MCR_DTR);
-	if (ISSET(data, TIOCM_RTS))
-		SET(m, MCR_RTS);
-	return m;
-}
-
-int
-aceioctl(dev, cmd, data, flag, p)
-	dev_t dev;
-	u_long cmd;
-	caddr_t data;
-	int flag;
-	struct proc *p;
-{
-	int unit = DEVUNIT(dev);
-	struct com_softc *sc = ace_cd.cd_devs[unit];
-	struct tty *tp = sc->sc_tty;
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	int error;
-
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		int s = spltty();
-		com_absent_notify(sc);
-		splx(s);
-		return EIO;
-	}
-
-	error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
-	if (error >= 0)
-		return error;
-	error = ttioctl(tp, cmd, data, flag, p);
-	if (error >= 0)
-		return error;
-
-	switch (cmd) {
-	case TIOCSBRK:
-		SET(sc->sc_lcr, LCR_SBREAK);
-		bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr);
-		break;
-	case TIOCCBRK:
-		CLR(sc->sc_lcr, LCR_SBREAK);
-		bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr);
-		break;
-	case TIOCSDTR:
-		SET(sc->sc_mcr, sc->sc_dtr);
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		break;
-	case TIOCCDTR:
-		CLR(sc->sc_mcr, sc->sc_dtr);
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		break;
-	case TIOCMSET:
-		CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
-	case TIOCMBIS:
-		SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		break;
-	case TIOCMBIC:
-		CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		break;
-	case TIOCMGET: {
-		u_char m;
-		int bits = 0;
-
-		m = sc->sc_mcr;
-		if (ISSET(m, MCR_DTR))
-			SET(bits, TIOCM_DTR);
-		if (ISSET(m, MCR_RTS))
-			SET(bits, TIOCM_RTS);
-		m = sc->sc_msr;
-		if (ISSET(m, MSR_DCD))
-			SET(bits, TIOCM_CD);
-		if (ISSET(m, MSR_CTS))
-			SET(bits, TIOCM_CTS);
-		if (ISSET(m, MSR_DSR))
-			SET(bits, TIOCM_DSR);
-		if (ISSET(m, MSR_RI | MSR_TERI))
-			SET(bits, TIOCM_RI);
-		if (bus_io_read_1(bc, ioh, com_ier))
-			SET(bits, TIOCM_LE);
-		*(int *)data = bits;
-		break;
-	}
-	case TIOCGFLAGS: {
-		int driverbits, userbits = 0;
-
-		driverbits = sc->sc_swflags;
-		if (ISSET(driverbits, COM_SW_SOFTCAR))
-			SET(userbits, TIOCFLAG_SOFTCAR);
-		if (ISSET(driverbits, COM_SW_CLOCAL))
-			SET(userbits, TIOCFLAG_CLOCAL);
-		if (ISSET(driverbits, COM_SW_CRTSCTS))
-			SET(userbits, TIOCFLAG_CRTSCTS);
-		if (ISSET(driverbits, COM_SW_MDMBUF))
-			SET(userbits, TIOCFLAG_MDMBUF);
-
-		*(int *)data = userbits;
-		break;
-	}
-	case TIOCSFLAGS: {
-		int userbits, driverbits = 0;
-
-		error = suser(p->p_ucred, &p->p_acflag); 
-		if (error != 0)
-			return(EPERM); 
-
-		userbits = *(int *)data;
-		if (ISSET(userbits, TIOCFLAG_SOFTCAR) ||
-		    ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
-			SET(driverbits, COM_SW_SOFTCAR);
-		if (ISSET(userbits, TIOCFLAG_CLOCAL))
-			SET(driverbits, COM_SW_CLOCAL);
-		if (ISSET(userbits, TIOCFLAG_CRTSCTS))
-			SET(driverbits, COM_SW_CRTSCTS);
-		if (ISSET(userbits, TIOCFLAG_MDMBUF))
-			SET(driverbits, COM_SW_MDMBUF);
-
-		sc->sc_swflags = driverbits;
-		break;
-	}
-	default:
-		return ENOTTY;
-	}
-
-	return 0;
-}
-
-int
-comparam(tp, t)
-	struct tty *tp;
-	struct termios *t;
-{
-	struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(tp->t_dev)];
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	int ospeed = comspeed(t->c_ospeed);
-	u_char lcr;
-	tcflag_t oldcflag;
-	int s;
-
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		int s = spltty();
-		com_absent_notify(sc);
-		splx(s);
-		return EIO;
-	}
-
-	/* check requested parameters */
-	if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
-		return EINVAL;
-
-	lcr = ISSET(sc->sc_lcr, LCR_SBREAK);
-
-	switch (ISSET(t->c_cflag, CSIZE)) {
-	case CS5:
-		SET(lcr, LCR_5BITS);
-		break;
-	case CS6:
-		SET(lcr, LCR_6BITS);
-		break;
-	case CS7:
-		SET(lcr, LCR_7BITS);
-		break;
-	case CS8:
-		SET(lcr, LCR_8BITS);
-		break;
-	}
-	if (ISSET(t->c_cflag, PARENB)) {
-		SET(lcr, LCR_PENAB);
-		if (!ISSET(t->c_cflag, PARODD))
-			SET(lcr, LCR_PEVEN);
-	}
-	if (ISSET(t->c_cflag, CSTOPB))
-		SET(lcr, LCR_STOPB);
-
-	sc->sc_lcr = lcr;
-
-	s = spltty();
-
-	if (ospeed == 0) {
-		CLR(sc->sc_mcr, MCR_DTR);
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-	}
-
-	/*
-	 * Set the FIFO threshold based on the receive speed, if we are
-	 * changing it.
-	 */
-#if 0 /* XXX CHECK WHY SPEED IS NOT INIT CORRECTLY */
-	if (tp->t_ispeed != t->c_ispeed) {
-#else
-	if (1) {
-#endif
-		if (ospeed != 0) {
-			/*
-			 * Make sure the transmit FIFO is empty before
-			 * proceeding.  If we don't do this, some revisions
-			 * of the UART will hang.  Interestingly enough,
-			 * even if we do this will the last character is
-			 * still being pushed out, they don't hang.  This
-			 * seems good enough.
-			 */
-			while (ISSET(tp->t_state, TS_BUSY)) {
-				int error;
-
-				++sc->sc_halt;
-				error = ttysleep(tp, &tp->t_outq,
-				    TTOPRI | PCATCH, "comprm", 0);
-				--sc->sc_halt;
-				if (error) {
-					splx(s);
-					comstart(tp);
-					return (error);
-				}
-			}
-
-			bus_io_write_1(bc, ioh, com_lcr, lcr | LCR_DLAB);
-			bus_io_write_1(bc, ioh, com_dlbl, ospeed);
-			bus_io_write_1(bc, ioh, com_dlbh, ospeed >> 8);
-			bus_io_write_1(bc, ioh, com_lcr, lcr);
-			SET(sc->sc_mcr, MCR_DTR);
-			bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-		} else
-			bus_io_write_1(bc, ioh, com_lcr, lcr);
-
-		if (!ISSET(sc->sc_hwflags, COM_HW_HAYESP) &&
-		    ISSET(sc->sc_hwflags, COM_HW_FIFO))
-			bus_io_write_1(bc, ioh, com_fifo,
-			    FIFO_ENABLE |
-			    (t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
-	} else
-		bus_io_write_1(bc, ioh, com_lcr, lcr);
-
-	/* When not using CRTSCTS, RTS follows DTR. */
-	if (!ISSET(t->c_cflag, CRTSCTS)) {
-		if (ISSET(sc->sc_mcr, MCR_DTR)) {
-			if (!ISSET(sc->sc_mcr, MCR_RTS)) {
-				SET(sc->sc_mcr, MCR_RTS);
-				bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-			}
-		} else {
-			if (ISSET(sc->sc_mcr, MCR_RTS)) {
-				CLR(sc->sc_mcr, MCR_RTS);
-				bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-			}
-		}
-		sc->sc_dtr = MCR_DTR | MCR_RTS;
-	} else
-		sc->sc_dtr = MCR_DTR;
-
-	/* and copy to tty */
-	tp->t_ispeed = t->c_ispeed;
-	tp->t_ospeed = t->c_ospeed;
-	oldcflag = tp->t_cflag;
-	tp->t_cflag = t->c_cflag;
-
-	/*
-	 * If DCD is off and MDMBUF is changed, ask the tty layer if we should
-	 * stop the device.
-	 */
-	if (!ISSET(sc->sc_msr, MSR_DCD) &&
-	    !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
-	    ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) &&
-	    (*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
-		CLR(sc->sc_mcr, sc->sc_dtr);
-		bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-	}
-
-	/* Just to be sure... */
-	splx(s);
-	comstart(tp);
-	return 0;
-}
-
-void
-comstart_pending(arg)
-	void *arg;
-{
-	struct com_softc *sc = arg;
-	int s;
-
-	s = spltty();
-	com_absent_notify(sc);
-	splx(s);
-}
-
-void
-comstart(tp)
-	struct tty *tp;
-{
-	struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(tp->t_dev)];
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	int s;
-
-	s = spltty();
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) {
-		/*
-		 * not quite good enough: if caller is ttywait() it will
-		 * go to sleep immediately, so hang out a bit and then
-		 * prod caller again.
-		 */
-		com_absent_notify(sc);
-		timeout(comstart_pending, sc, 1);
-		goto out;
-	}
-	if (ISSET(tp->t_state, TS_BUSY))
-		goto out;
-	if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) ||
-	    sc->sc_halt > 0)
-		goto stopped;
-	if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS))
-		goto stopped;
-	if (tp->t_outq.c_cc <= tp->t_lowat) {
-		if (ISSET(tp->t_state, TS_ASLEEP)) {
-			CLR(tp->t_state, TS_ASLEEP);
-			wakeup(&tp->t_outq);
-		}
-		if (tp->t_outq.c_cc == 0)
-			goto stopped;
-		selwakeup(&tp->t_wsel);
-	}
-	SET(tp->t_state, TS_BUSY);
-
-	if (!ISSET(sc->sc_ier, IER_ETXRDY)) {
-		SET(sc->sc_ier, IER_ETXRDY);
-		bus_io_write_1(bc, ioh, com_ier, sc->sc_ier);
-	}
-#ifdef COM_HAYESP
-	if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) {
-		u_char buffer[1024], *cp = buffer;
-		int n = q_to_b(&tp->t_outq, cp, sizeof buffer);
-		do
-			bus_io_write_1(bc, ioh, com_data, *cp++);
-		while (--n);
-	}
-	else
-#endif
-	if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
-		u_char buffer[16], *cp = buffer;
-		int n = q_to_b(&tp->t_outq, cp, sizeof buffer);
-		do {
-			bus_io_write_1(bc, ioh, com_data, *cp++);
-		} while (--n);
-	} else
-		bus_io_write_1(bc, ioh, com_data, getc(&tp->t_outq));
-out:
-	splx(s);
-	return;
-stopped:
-	if (ISSET(sc->sc_ier, IER_ETXRDY)) {
-		CLR(sc->sc_ier, IER_ETXRDY);
-		bus_io_write_1(bc, ioh, com_ier, sc->sc_ier);
-	}
-	splx(s);
-}
-
-/*
- * Stop output on a line.
- */
-int
-acestop(tp, flag)
-	struct tty *tp;
-	int flag;
-{
-	int s;
-
-	s = spltty();
-	if (ISSET(tp->t_state, TS_BUSY))
-		if (!ISSET(tp->t_state, TS_TTSTOP))
-			SET(tp->t_state, TS_FLUSH);
-	splx(s);
-	return 0;
-}
-
-void
-comdiag(arg)
-	void *arg;
-{
-	struct com_softc *sc = arg;
-	int overflows, floods;
-	int s;
-
-	s = spltty();
-	sc->sc_errors = 0;
-	overflows = sc->sc_overflows;
-	sc->sc_overflows = 0;
-	floods = sc->sc_floods;
-	sc->sc_floods = 0;
-	splx(s);
-
-	log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n",
-	    sc->sc_dev.dv_xname,
-	    overflows, overflows == 1 ? "" : "s",
-	    floods, floods == 1 ? "" : "s");
-}
-
-void
-compoll(arg)
-	void *arg;
-{
-	int unit;
-	struct com_softc *sc;
-	struct tty *tp;
-	register u_char *ibufp;
-	u_char *ibufend;
-	register int c;
-	int s;
-	static int lsrmap[8] = {
-		0,      TTY_PE,
-		TTY_FE, TTY_PE|TTY_FE,
-		TTY_FE, TTY_PE|TTY_FE,
-		TTY_FE, TTY_PE|TTY_FE
-	};
-
-	s = spltty();
-	if (comevents == 0) {
-		splx(s);
-		goto out;
-	}
-	comevents = 0;
-	splx(s);
-
-	for (unit = 0; unit < ace_cd.cd_ndevs; unit++) {
-		sc = ace_cd.cd_devs[unit];
-		if (sc == 0 || sc->sc_ibufp == sc->sc_ibuf)
-			continue;
-
-		tp = sc->sc_tty;
-
-		s = spltty();
-
-		ibufp = sc->sc_ibuf;
-		ibufend = sc->sc_ibufp;
-
-		if (ibufp == ibufend) {
-			splx(s);
-			continue;
-		}
-
-		sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ?
-					     sc->sc_ibufs[1] : sc->sc_ibufs[0];
-		sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
-		sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
-
-		if (tp == 0 || !ISSET(tp->t_state, TS_ISOPEN)) {
-			splx(s);
-			continue;
-		}
-
-		if (ISSET(tp->t_cflag, CRTSCTS) &&
-		    !ISSET(sc->sc_mcr, MCR_RTS)) {
-			/* XXX */
-			SET(sc->sc_mcr, MCR_RTS);
-			bus_io_write_1(sc->sc_bc, sc->sc_ioh, com_mcr,
-			    sc->sc_mcr);
-		}
-
-		splx(s);
-
-		while (ibufp < ibufend) {
-			c = *ibufp++;
-			if (*ibufp & LSR_OE) {
-				sc->sc_overflows++;
-				if (sc->sc_errors++ == 0)
-					timeout(comdiag, sc, 60 * hz);
-			}
-			/* This is ugly, but fast. */
-			c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2];
-			(*linesw[tp->t_line].l_rint)(c, tp);
-		}
-	}
-
-out:
-	timeout(compoll, NULL, 1);
-}
-
-int
-comintr(arg)
-	void *arg;
-{
-	struct com_softc *sc = arg;
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	struct tty *tp;
-	u_char lsr, data, msr, delta;
-#ifdef COM_DEBUG
-	int n;
-	struct {
-		u_char iir, lsr, msr;
-	} iter[32];
-#endif
-
-	if (ISSET(sc->sc_hwflags, COM_HW_ABSENT) || !sc->sc_tty)
-		return 0;		/* can't do squat. */
-
-#ifdef COM_DEBUG
-	n = 0;
-	if (ISSET(iter[n].iir = bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND))
-		return (0);
-#else
-	if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND))
-		return (0);
-#endif
-
-	tp = sc->sc_tty;
-
-	for (;;) {
-#ifdef COM_DEBUG
-		iter[n].lsr =
-#endif
-		lsr = bus_io_read_1(bc, ioh, com_lsr);
-
-		if (ISSET(lsr, LSR_RXRDY)) {
-			register u_char *p = sc->sc_ibufp;
-
-			comevents = 1;
-			do {
-				data = bus_io_read_1(bc, ioh, com_data);
-				if (ISSET(lsr, LSR_BI)) {
-#ifdef notdef
-					printf("break %02x %02x %02x %02x\n",
-					    sc->sc_msr, sc->sc_mcr, sc->sc_lcr,
-					    sc->sc_dtr);
-#endif
-#ifdef DDB
-					if (ISSET(sc->sc_hwflags,
-					    COM_HW_CONSOLE)) {
-						Debugger();
-						goto next;
-					}
-#endif
-				}
-				if (p >= sc->sc_ibufend) {
-					sc->sc_floods++;
-					if (sc->sc_errors++ == 0)
-						timeout(comdiag, sc, 60 * hz);
-				} else {
-					*p++ = data;
-					*p++ = lsr;
-					if (p == sc->sc_ibufhigh &&
-					    ISSET(tp->t_cflag, CRTSCTS)) {
-						/* XXX */
-						CLR(sc->sc_mcr, MCR_RTS);
-						bus_io_write_1(bc, ioh, com_mcr,
-						    sc->sc_mcr);
-					}
-				}
-			next:
-#ifdef COM_DEBUG
-				if (++n >= 32)
-					goto ohfudge;
-				iter[n].lsr =
-#endif
-				lsr = bus_io_read_1(bc, ioh, com_lsr);
-			} while (ISSET(lsr, LSR_RXRDY));
-
-			sc->sc_ibufp = p;
-		}
-#ifdef COM_DEBUG
-		else if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE))
-			printf("weird lsr %02x\n", lsr);
-#endif
-
-#ifdef COM_DEBUG
-		iter[n].msr =
-#endif
-		msr = bus_io_read_1(bc, ioh, com_msr);
-
-		if (msr != sc->sc_msr) {
-			delta = msr ^ sc->sc_msr;
-			sc->sc_msr = msr;
-			if (ISSET(delta, MSR_DCD) &&
-			    !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
-			    (*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD)) == 0) {
-				CLR(sc->sc_mcr, sc->sc_dtr);
-				bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr);
-			}
-			if (ISSET(delta & msr, MSR_CTS) &&
-			    ISSET(tp->t_cflag, CRTSCTS)) {
-				/* the line is up and we want to do rts/cts flow control */
-				(*linesw[tp->t_line].l_start)(tp);
-			}
-		}
-
-		if (ISSET(lsr, LSR_TXRDY) && ISSET(tp->t_state, TS_BUSY)) {
-			CLR(tp->t_state, TS_BUSY | TS_FLUSH);
-			if (sc->sc_halt > 0)
-				wakeup(&tp->t_outq);
-			(*linesw[tp->t_line].l_start)(tp);
-		}
-
-#ifdef COM_DEBUG
-		if (++n >= 32)
-			goto ohfudge;
-		if (ISSET(iter[n].iir = bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND))
-			return (1);
-#else
-		if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND))
-			return (1);
-#endif
-	}
-#ifdef COM_DEBUG
-ohfudge:
-	printf("comintr: too many iterations");
-	for (n = 0; n < 32; n++) {
-		if ((n % 4) == 0)
-			printf("\ncomintr: iter[%02d]", n);
-		printf("  %02x %02x %02x", iter[n].iir, iter[n].lsr, iter[n].msr);
-	}
-	printf("\n");
-	printf("comintr: msr %02x mcr %02x lcr %02x ier %02x\n",
-	    sc->sc_msr, sc->sc_mcr, sc->sc_lcr, sc->sc_ier);
-	printf("comintr: state %08x cc %d\n", sc->sc_tty->t_state,
-	    sc->sc_tty->t_outq.c_cc);
-#endif
-}
-
-/*
- * Following are all routines needed for COM to act as console
- */
-#include <dev/cons.h>
-
-void
-acecnprobe(cp)
-	struct consdev *cp;
-{
-	/* XXX NEEDS TO BE FIXED XXX */
-	extern int cputype;
-	bus_chipset_tag_t bc = 0;
-	bus_io_handle_t ioh;
-	int found;
-
-	cp->cn_pri = CN_DEAD;
-
-	if(cputype != ACER_PICA_61)
-		return;
-
-	if (bus_io_map(bc, CONADDR, COM_NPORTS, &ioh)) {
-		cp->cn_pri = CN_DEAD;
-		return;
-	}
-	ioh = CONADDR;
-	found = comprobe1(bc, ioh, CONADDR);
-	if (!found) {
-		return;
-	}
-
-	/* locate the major number */
-	for (commajor = 0; commajor < nchrdev; commajor++)
-		if (cdevsw[commajor].d_open == aceopen)
-			break;
-
-	/* initialize required fields */
-	cp->cn_dev = makedev(commajor, CONUNIT);
-#ifdef	COMCONSOLE
-	cp->cn_pri = CN_REMOTE;		/* Force a serial port console */
-#else
-	cp->cn_pri = CN_NORMAL;
-#endif
-}
-
-void
-acecninit(cp)
-	struct consdev *cp;
-{
-
-#if 0
-	XXX NEEDS TO BE FIXED XXX
-	comconsbc = ???;
-#endif
-	if (bus_io_map(comconsbc, CONADDR, COM_NPORTS, &comconsioh))
-		panic("acecninit: mapping failed");
-
-	cominit(comconsbc, comconsioh, comdefaultrate);
-	comconsaddr = CONADDR;
-	comconsinit = 0;
-}
-
-void
-cominit(bc, ioh, rate)
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	int rate;
-{
-	int s = splhigh();
-	u_char stat;
-
-	bus_io_write_1(bc, ioh, com_lcr, LCR_DLAB);
-	rate = comspeed(comdefaultrate);
-	bus_io_write_1(bc, ioh, com_dlbl, rate);
-	bus_io_write_1(bc, ioh, com_dlbh, rate >> 8);
-	bus_io_write_1(bc, ioh, com_lcr, LCR_8BITS);
-	bus_io_write_1(bc, ioh, com_ier, IER_ERXRDY | IER_ETXRDY);
-	bus_io_write_1(bc, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_4);
-	stat = bus_io_read_1(bc, ioh, com_iir);
-	splx(s);
-}
-
-int
-acecngetc(dev)
-	dev_t dev;
-{
-	int s = splhigh();
-	bus_chipset_tag_t bc = comconsbc;
-	bus_io_handle_t ioh = comconsioh;
-	u_char stat, c;
-
-	while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_RXRDY))
-		;
-	c = bus_io_read_1(bc, ioh, com_data);
-	stat = bus_io_read_1(bc, ioh, com_iir);
-	splx(s);
-	return c;
-}
-
-/*
- * Console kernel output character routine.
- */
-void
-acecnputc(dev, c)
-	dev_t dev;
-	int c;
-{
-	int s = splhigh();
-	bus_chipset_tag_t bc = comconsbc;
-	bus_io_handle_t ioh = comconsioh;
-	u_char stat;
-	register int timo;
-
-#ifdef KGDB
-	if (dev != kgdb_dev)
-#endif
-	if (comconsinit == 0) {
-		cominit(bc, ioh, comdefaultrate);
-		comconsinit = 1;
-	}
-	/* wait for any pending transmission to finish */
-	timo = 50000;
-	while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_TXRDY) && --timo)
-		;
-	bus_io_write_1(bc, ioh, com_data, c);
-	/* wait for this transmission to complete */
-	timo = 1500000;
-	while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_TXRDY) && --timo)
-		;
-	/* clear any interrupts generated by this transmission */
-	stat = bus_io_read_1(bc, ioh, com_iir);
-	splx(s);
-}
-
-void
-acecnpollc(dev, on)
-	dev_t dev;
-	int on;
-{
-
-}
diff --git a/sys/arch/arc/dev/lpr.c b/sys/arch/arc/dev/lpr.c
deleted file mode 100644
index 6c5e6d61d7c..00000000000
--- a/sys/arch/arc/dev/lpr.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*	$OpenBSD: lpr.c,v 1.3 1996/11/12 20:29:54 niklas Exp $ */
-
-/*
- * Copyright (c) 1993, 1994 Charles Hannum.
- * Copyright (c) 1990 William F. Jolitz, TeleMuse
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This software is a component of "386BSD" developed by 
- *	William F. Jolitz, TeleMuse.
- * 4. Neither the name of the developer nor the name "386BSD"
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ 
- * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS 
- * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT. 
- * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT 
- * NOT MAKE USE OF THIS WORK.
- *
- * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
- * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN 
- * REFERENCES SUCH AS THE  "PORTING UNIX TO THE 386" SERIES 
- * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING 
- * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND 
- * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE 
- * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS 
- * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
- *
- * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE DEVELOPER BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Device Driver for AT parallel printer port
- */
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/proc.h>
-#include <sys/user.h>
-#include <sys/buf.h>
-#include <sys/kernel.h>
-#include <sys/ioctl.h>
-#include <sys/uio.h>
-#include <sys/device.h>
-#include <sys/conf.h>
-#include <sys/syslog.h>
-
-#include <machine/bus.old.h>
-#include <machine/intr.h>
-
-#include <dev/isa/isavar.h>
-#include <dev/isa/lptreg.h>
-
-#include <lpr.h>
-
-#define	TIMEOUT		hz*16	/* wait up to 16 seconds for a ready */
-#define	STEP		hz/4
-
-#define	LPTPRI		(PZERO+8)
-#define	LPT_BSIZE	1024
-
-#if !defined(DEBUG) || !defined(notdef)
-#define LPRINTF(a)
-#else
-#define LPRINTF		if (lprdebug) printf a
-int lprdebug = 1;
-#endif
-
-struct lpr_softc {
-	struct device sc_dev;
-	void *sc_ih;
-
-	size_t sc_count;
-	struct buf *sc_inbuf;
-	u_char *sc_cp;
-	int sc_spinmax;
-	int sc_iobase;
-	bus_chipset_tag_t sc_bc;
-	bus_io_handle_t sc_ioh;
-	int sc_irq;
-	u_char sc_state;
-#define	LPT_OPEN	0x01	/* device is open */
-#define	LPT_OBUSY	0x02	/* printer is busy doing output */
-#define	LPT_INIT	0x04	/* waiting to initialize for open */
-	u_char sc_flags;
-#define	LPT_AUTOLF	0x20	/* automatic LF on CR */
-#define	LPT_NOPRIME	0x40	/* don't prime on open */
-#define	LPT_NOINTR	0x80	/* do not use interrupt */
-	u_char sc_control;
-	u_char sc_laststatus;
-};
-
-/* XXX does not belong here */
-cdev_decl(lpr);
-
-int lprintr __P((void *));
-
-#if NLPR_ISA
-int lpr_isa_probe __P((struct device *, void *, void *));
-void lpr_isa_attach __P((struct device *, struct device *, void *));
-struct cfattach lpr_isa_ca = {
-	sizeof(struct lpr_softc), lpr_isa_probe, lpr_isa_attach
-};
-#endif
-
-#if NLPR_PICA
-int lpr_pica_probe __P((struct device *, void *, void *));
-void lpr_pica_attach __P((struct device *, struct device *, void *));
-struct cfattach lpr_pica_ca = {
-	sizeof(struct lpr_softc), lpr_pica_probe, lpr_pica_attach
-};
-#endif
-
-struct cfdriver lpr_cd = {
-	NULL, "lpr", DV_TTY
-};
-
-#define	LPTUNIT(s)	(minor(s) & 0x1f)
-#define	LPTFLAGS(s)	(minor(s) & 0xe0)
-
-#define	LPS_INVERT	(LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK)
-#define	LPS_MASK	(LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK|LPS_NOPAPER)
-#define	NOT_READY()	((bus_io_read_1(bc, ioh, lpt_status) ^ LPS_INVERT) & LPS_MASK)
-#define	NOT_READY_ERR()	not_ready(bus_io_read_1(bc, ioh, lpt_status), sc)
-static int not_ready __P((u_char, struct lpr_softc *));
-
-static void lprwakeup __P((void *arg));
-static int pushbytes __P((struct lpr_softc *));
-
-int	lpr_port_test __P((bus_chipset_tag_t, bus_io_handle_t, bus_io_addr_t,
-	    bus_io_size_t, u_char, u_char));
-
-/*
- * Internal routine to lprprobe to do port tests of one byte value.
- */
-int
-lpr_port_test(bc, ioh, base, off, data, mask)
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	bus_io_addr_t base;
-	bus_io_size_t off;
-	u_char data, mask;
-{
-	int timeout;
-	u_char temp;
-
-	data &= mask;
-	bus_io_write_1(bc, ioh, off, data);
-	timeout = 1000;
-	do {
-		delay(10);
-		temp = bus_io_read_1(bc, ioh, off) & mask;
-	} while (temp != data && --timeout);
-	LPRINTF(("lpr: port=0x%x out=0x%x in=0x%x timeout=%d\n", base + off,
-	    data, temp, timeout));
-	return (temp == data);
-}
-
-/*
- * Logic:
- *	1) You should be able to write to and read back the same value
- *	   to the data port.  Do an alternating zeros, alternating ones,
- *	   walking zero, and walking one test to check for stuck bits.
- *
- *	2) You should be able to write to and read back the same value
- *	   to the control port lower 5 bits, the upper 3 bits are reserved
- *	   per the IBM PC technical reference manauls and different boards
- *	   do different things with them.  Do an alternating zeros, alternating
- *	   ones, walking zero, and walking one test to check for stuck bits.
- *
- *	   Some printers drag the strobe line down when the are powered off
- * 	   so this bit has been masked out of the control port test.
- *
- *	   XXX Some printers may not like a fast pulse on init or strobe, I
- *	   don't know at this point, if that becomes a problem these bits
- *	   should be turned off in the mask byte for the control port test.
- *
- *	3) Set the data and control ports to a value of 0
- */
-#if NLPR_ISA
-int
-lpr_isa_probe(parent, match, aux)
-	struct device *parent;
-	void *match, *aux;
-{
-	struct isa_attach_args *ia = aux;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	u_long base;
-	u_char mask, data;
-	int i, rv;
-
-#ifdef DEBUG
-#define	ABORT	do {printf("lprprobe: mask %x data %x failed\n", mask, data); \
-		    goto out;} while (0)
-#else
-#define	ABORT	goto out
-#endif
-
-	bc = ia->ia_bc;
-	base = ia->ia_iobase;
-	if (bus_io_map(bc, base, LPT_NPORTS, &ioh))
-		return 0;
-
-	rv = 0;
-	mask = 0xff;
-
-	data = 0x55;				/* Alternating zeros */
-	if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-		ABORT;
-
-	data = 0xaa;				/* Alternating ones */
-	if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-		ABORT;
-
-	for (i = 0; i < CHAR_BIT; i++) {	/* Walking zero */
-		data = ~(1 << i);
-		if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-			ABORT;
-	}
-
-	for (i = 0; i < CHAR_BIT; i++) {	/* Walking one */
-		data = (1 << i);
-		if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-			ABORT;
-	}
-
-	bus_io_write_1(bc, ioh, lpt_data, 0);
-	bus_io_write_1(bc, ioh, lpt_control, 0);
-
-	ia->ia_iosize = LPT_NPORTS;
-	ia->ia_msize = 0;
-
-	rv = 1;
-
-out:
-	bus_io_unmap(bc, ioh, LPT_NPORTS);
-	return rv;
-}
-#endif
-
-#if NLPR_PICA
-int
-lpr_pica_probe(parent, match, aux)
-	struct device *parent;
-	void *match, *aux;
-{
-	struct confargs *ca = aux;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	u_long base;
-	u_char mask, data;
-	int i;
-
-#ifdef DEBUG
-#define	ABORT	do {printf("lprprobe: mask %x data %x failed\n", mask, data); \
-		    return 0;} while (0)
-#else
-#define	ABORT	return 0
-#endif
-
-	if(!BUS_MATCHNAME(ca, "lpr"))
-		 return(0);
-
-	bc = 0;
-	base = (int)BUS_CVTADDR(ca);
-	ioh = base;
-
-	mask = 0xff;
-
-	data = 0x55;				/* Alternating zeros */
-	if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-		ABORT;
-
-	data = 0xaa;				/* Alternating ones */
-	if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-		ABORT;
-
-	for (i = 0; i < CHAR_BIT; i++) {	/* Walking zero */
-		data = ~(1 << i);
-		if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-			ABORT;
-	}
-
-	for (i = 0; i < CHAR_BIT; i++) {	/* Walking one */
-		data = (1 << i);
-		if (!lpr_port_test(bc, ioh, base, lpt_data, data, mask))
-			ABORT;
-	}
-
-	bus_io_write_1(bc, ioh, lpt_data, 0);
-	bus_io_write_1(bc, ioh, lpt_control, 0);
-
-	return 1;
-}
-#endif
-
-#if NLPR_ISA
-void
-lpr_isa_attach(parent, self, aux)
-	struct device *parent, *self;
-	void *aux;
-{
-	struct lpr_softc *sc = (void *)self;
-	struct isa_attach_args *ia = aux;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-
-	if (ia->ia_irq != IRQUNK)
-		printf("\n");
-	else
-		printf(": polled\n");
-
-	sc->sc_iobase = ia->ia_iobase;
-	sc->sc_irq = ia->ia_irq;
-	sc->sc_state = 0;
-
-	bc = sc->sc_bc = ia->ia_bc;
-	if (bus_io_map(bc, sc->sc_iobase, LPT_NPORTS, &ioh))
-		panic("lprattach: couldn't map I/O ports");
-	sc->sc_ioh = ioh;
-
-	bus_io_write_1(bc, ioh, lpt_control, LPC_NINIT);
-
-	if (ia->ia_irq != IRQUNK)
-		sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
-		    IPL_TTY, lprintr, sc, sc->sc_dev.dv_xname);
-}
-#endif
-
-#if NLPR_PICA
-void
-lpr_pica_attach(parent, self, aux)
-	struct device *parent, *self;
-	void *aux;
-{
-	struct lpr_softc *sc = (void *)self;
-	struct confargs *ca = aux;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-
-	printf("\n");
-
-	sc->sc_iobase = (int)BUS_CVTADDR(ca);
-	sc->sc_irq = 0;
-	sc->sc_state = 0;
-
-	bc = sc->sc_bc = 0;
-	sc->sc_ioh = sc->sc_iobase;
-
-	bus_io_write_1(bc, ioh, lpt_control, LPC_NINIT);
-
-	BUS_INTR_ESTABLISH(ca, lprintr, sc);
-}
-#endif
-
-/*
- * Reset the printer, then wait until it's selected and not busy.
- */
-int
-lpropen(dev, flag, mode, p)
-	dev_t dev;
-	int flag;
-	int mode;
-	struct proc *p;
-{
-	int unit = LPTUNIT(dev);
-	u_char flags = LPTFLAGS(dev);
-	struct lpr_softc *sc;
-	bus_chipset_tag_t bc;
-	bus_io_handle_t ioh;
-	u_char control;
-	int error;
-	int spin;
-
-	if (unit >= lpr_cd.cd_ndevs)
-		return ENXIO;
-	sc = lpr_cd.cd_devs[unit];
-	if (!sc)
-		return ENXIO;
-
-	if (sc->sc_irq == IRQUNK && (flags & LPT_NOINTR) == 0)
-		return ENXIO;
-
-#ifdef DIAGNOSTIC
-	if (sc->sc_state)
-		printf("%s: stat=0x%x not zero\n", sc->sc_dev.dv_xname,
-		    sc->sc_state);
-#endif
-
-	if (sc->sc_state)
-		return EBUSY;
-
-	sc->sc_state = LPT_INIT;
-	sc->sc_flags = flags;
-	LPRINTF(("%s: open: flags=0x%x\n", sc->sc_dev.dv_xname, flags));
-	bc = sc->sc_bc;
-	ioh = sc->sc_ioh;
-
-	if ((flags & LPT_NOPRIME) == 0) {
-		/* assert INIT for 100 usec to start up printer */
-		bus_io_write_1(bc, ioh, lpt_control, LPC_SELECT);
-		delay(100);
-	}
-
-	control = LPC_SELECT | LPC_NINIT;
-	bus_io_write_1(bc, ioh, lpt_control, control);
-
-	/* wait till ready (printer running diagnostics) */
-	for (spin = 0; NOT_READY_ERR(); spin += STEP) {
-		if (spin >= TIMEOUT) {
-			sc->sc_state = 0;
-			return EBUSY;
-		}
-
-		/* wait 1/4 second, give up if we get a signal */
-		error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lpropen", STEP);
-		if (error != EWOULDBLOCK) {
-			sc->sc_state = 0;
-			return error;
-		}
-	}
-
-	if ((flags & LPT_NOINTR) == 0)
-		control |= LPC_IENABLE;
-	if (flags & LPT_AUTOLF)
-		control |= LPC_AUTOLF;
-	sc->sc_control = control;
-	bus_io_write_1(bc, ioh, lpt_control, control);
-
-	sc->sc_inbuf = geteblk(LPT_BSIZE);
-	sc->sc_count = 0;
-	sc->sc_state = LPT_OPEN;
-
-	if ((sc->sc_flags & LPT_NOINTR) == 0)
-		lprwakeup(sc);
-
-	LPRINTF(("%s: opened\n", sc->sc_dev.dv_xname));
-	return 0;
-}
-
-int
-not_ready(status, sc)
-	u_char status;
-	struct lpr_softc *sc;
-{
-	u_char new;
-
-	status = (status ^ LPS_INVERT) & LPS_MASK;
-	new = status & ~sc->sc_laststatus;
-	sc->sc_laststatus = status;
-
-	if (new & LPS_SELECT)
-		log(LOG_NOTICE, "%s: offline\n", sc->sc_dev.dv_xname);
-	else if (new & LPS_NOPAPER)
-		log(LOG_NOTICE, "%s: out of paper\n", sc->sc_dev.dv_xname);
-	else if (new & LPS_NERR)
-		log(LOG_NOTICE, "%s: output error\n", sc->sc_dev.dv_xname);
-
-	return status;
-}
-
-void
-lprwakeup(arg)
-	void *arg;
-{
-	struct lpr_softc *sc = arg;
-	int s;
-
-	s = spltty();
-	lprintr(sc);
-	splx(s);
-
-	timeout(lprwakeup, sc, STEP);
-}
-
-/*
- * Close the device, and free the local line buffer.
- */
-int
-lprclose(dev, flag, mode, p)
-	dev_t dev;
-	int flag;
-	int mode;
-	struct proc *p;
-{
-	int unit = LPTUNIT(dev);
-	struct lpr_softc *sc = lpr_cd.cd_devs[unit];
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-
-	if (sc->sc_count)
-		(void) pushbytes(sc);
-
-	if ((sc->sc_flags & LPT_NOINTR) == 0)
-		untimeout(lprwakeup, sc);
-
-	bus_io_write_1(bc, ioh, lpt_control, LPC_NINIT);
-	sc->sc_state = 0;
-	bus_io_write_1(bc, ioh, lpt_control, LPC_NINIT);
-	brelse(sc->sc_inbuf);
-
-	LPRINTF(("%s: closed\n", sc->sc_dev.dv_xname));
-	return 0;
-}
-
-int
-pushbytes(sc)
-	struct lpr_softc *sc;
-{
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-	int error;
-
-	if (sc->sc_flags & LPT_NOINTR) {
-		int spin, tic;
-		u_char control = sc->sc_control;
-
-		while (sc->sc_count > 0) {
-			spin = 0;
-			while (NOT_READY()) {
-				if (++spin < sc->sc_spinmax)
-					continue;
-				tic = 0;
-				/* adapt busy-wait algorithm */
-				sc->sc_spinmax++;
-				while (NOT_READY_ERR()) {
-					/* exponential backoff */
-					tic = tic + tic + 1;
-					if (tic > TIMEOUT)
-						tic = TIMEOUT;
-					error = tsleep((caddr_t)sc,
-					    LPTPRI | PCATCH, "lprpsh", tic);
-					if (error != EWOULDBLOCK)
-						return error;
-				}
-				break;
-			}
-
-			bus_io_write_1(bc, ioh, lpt_data, *sc->sc_cp++);
-			bus_io_write_1(bc, ioh, lpt_control, control | LPC_STROBE);
-			sc->sc_count--;
-			bus_io_write_1(bc, ioh, lpt_control, control);
-
-			/* adapt busy-wait algorithm */
-			if (spin*2 + 16 < sc->sc_spinmax)
-				sc->sc_spinmax--;
-		}
-	} else {
-		int s;
-
-		while (sc->sc_count > 0) {
-			/* if the printer is ready for a char, give it one */
-			if ((sc->sc_state & LPT_OBUSY) == 0) {
-				LPRINTF(("%s: write %d\n", sc->sc_dev.dv_xname,
-				    sc->sc_count));
-				s = spltty();
-				(void) lprintr(sc);
-				splx(s);
-			}
-			error = tsleep((caddr_t)sc, LPTPRI | PCATCH,
-			    "lprwrite2", 0);
-			if (error)
-				return error;
-		}
-	}
-	return 0;
-}
-
-/* 
- * Copy a line from user space to a local buffer, then call putc to get the
- * chars moved to the output queue.
- */
-int
-lprwrite(dev, uio, flags)
-	dev_t dev;
-	struct uio *uio;
-	int flags;
-{
-	struct lpr_softc *sc = lpr_cd.cd_devs[LPTUNIT(dev)];
-	size_t n;
-	int error = 0;
-
-	while ((n = min(LPT_BSIZE, uio->uio_resid)) != 0) {
-		uiomove(sc->sc_cp = sc->sc_inbuf->b_data, n, uio);
-		sc->sc_count = n;
-		error = pushbytes(sc);
-		if (error) {
-			/*
-			 * Return accurate residual if interrupted or timed
-			 * out.
-			 */
-			uio->uio_resid += sc->sc_count;
-			sc->sc_count = 0;
-			return error;
-		}
-	}
-	return 0;
-}
-
-/*
- * Handle printer interrupts which occur when the printer is ready to accept
- * another char.
- */
-int
-lprintr(arg)
-	void *arg;
-{
-	struct lpr_softc *sc = arg;
-	bus_chipset_tag_t bc = sc->sc_bc;
-	bus_io_handle_t ioh = sc->sc_ioh;
-
-	if (((sc->sc_state & LPT_OPEN) == 0 && sc->sc_count == 0) || (sc->sc_flags & LPT_NOINTR))
-		return 0;
-
-	/* is printer online and ready for output */
-	if (NOT_READY() && NOT_READY_ERR())
-		return -1;
-
-	if (sc->sc_count) {
-		u_char control = sc->sc_control;
-		/* send char */
-		bus_io_write_1(bc, ioh, lpt_data, *sc->sc_cp++);
-		bus_io_write_1(bc, ioh, lpt_control, control | LPC_STROBE);
-		sc->sc_count--;
-		bus_io_write_1(bc, ioh, lpt_control, control);
-		sc->sc_state |= LPT_OBUSY;
-	} else
-		sc->sc_state &= ~LPT_OBUSY;
-
-	if (sc->sc_count == 0) {
-		/* none, wake up the top half to get more */
-		wakeup((caddr_t)sc);
-	}
-
-	return 1;
-}
-
-int
-lprioctl(dev, cmd, data, flag, p)
-	dev_t dev;
-	u_long cmd;
-	caddr_t data;
-	int flag;
-	struct proc *p;
-{
-	int error = 0;
-
-	switch (cmd) {
-	default:
-		error = ENODEV;
-	}
-
-	return error;
-}