Retire hp300, mvme68k and mvme88k ports. These ports have no users, keeping

this hardware alive is becoming increasingly difficult, and I should heed the
message sent by the three disks which have died on me over the last few days.

Noone sane will mourn these ports anyway. So long, and thanks for the fish.

1 files changed, 0 insertions, 150 deletions

diff --git a/sys/arch/hp300/stand/include/hilreg.h b/sys/arch/hp300/stand/include/hilreg.h
deleted file mode 100644
index ef70853fc8d..00000000000
--- a/sys/arch/hp300/stand/include/hilreg.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*	$OpenBSD: hilreg.h,v 1.2 2006/08/17 06:31:10 miod Exp $	*/
-/*	$NetBSD: hilreg.h,v 1.6 1997/02/02 09:39:21 thorpej Exp $	*/
-
-/*
- * Copyright (c) 1988 University of Utah.
- * Copyright (c) 1990, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * the Systems Programming Group of the University of Utah Computer
- * Science Department.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * from: Utah $Hdr: hilreg.h 1.10 92/01/21$
- *
- *	@(#)hilreg.h	8.1 (Berkeley) 6/10/93
- */
-
-#include <hp300/dev/iotypes.h>		/* XXX */
-
-struct	hil_dev {
-	char	hil_pad0;
-	vu_char	hil_data;
-	char	hil_pad1;
-	vu_char	hil_cmd;
-#define hil_stat hil_cmd
-};
-
-#define	HILADDR			((struct hil_dev *)IIOV(0x428000))
-
-#define READHILDATA(x)		((x)->hil_data)
-#define READHILSTAT(x)		((x)->hil_stat)
-#define READHILCMD(x)		((x)->hil_cmd)
-#define WRITEHILDATA(x, y)	((x)->hil_data = (y))
-#define WRITEHILSTAT(x, y)	((x)->hil_stat = (y))
-#define WRITEHILCMD(x, y)	((x)->hil_cmd  = (y))
-
-#define	HIL_BUSY		0x02
-#define	HIL_DATA_RDY		0x01
-
-#define HILWAIT(hil_dev)	while ((READHILSTAT(hil_dev) & HIL_BUSY))
-#define HILDATAWAIT(hil_dev)	while (!(READHILSTAT(hil_dev) & HIL_DATA_RDY))
-
-/* HIL status bits */
-#define	HIL_POLLDATA	0x10		/* HIL poll data follows */
-#define	HIL_COMMAND	0x08		/* Start of original command */
-#define	HIL_ERROR	0x080		/* HIL error */
-#define	HIL_RECONFIG	0x080		/* HIL has reconfigured */
-#define	HIL_STATMASK	(HIL_DATA | HIL_COMMAND)
-
-#define	HIL_SSHIFT	4		/* Bits to shift status over */
-#define	HIL_SMASK	0xF		/* Service request status mask */
-#define	HIL_DEVMASK	0x07
-
-/* HIL status types */
-#define	HIL_STATUS	0x5		/* HIL status in data register */
-#define	HIL_DATA	0x6		/* HIL data in data register */
-#define	HIL_CTRLSHIFT	0x8		/* key + CTRL + SHIFT */
-#define	HIL_CTRL	0x9		/* key + CTRL */
-#define	HIL_SHIFT	0xA		/* key + SHIFT */
-#define	HIL_KEY		0xB		/* key only */
-#define	HIL_68K		0x4		/* Data from the 68k is ready */
-
-/* HIL commands */
-#define	HIL_SETARD	0xA0		/* set auto-repeat delay */
-#define	HIL_SETARR	0xA2		/* set auto-repeat rate */
-#define	HIL_SETTONE	0xA3		/* set tone generator */
-#define	HIL_CNMT	0xB2		/* clear nmi */
-#define	HIL_INTON	0x5C		/* Turn on interrupts. */
-#define	HIL_INTOFF	0x5D		/* Turn off interrupts. */
-#define	HIL_TRIGGER	0xC5		/* trigger command */
-#define	HIL_STARTCMD	0xE0		/* start loop command */
-#define	HIL_TIMEOUT	0xFE		/* timeout */
-#define	HIL_READTIME	0x13		/* Read real time register */
-
-/* Read/write various registers on the 8042. */
-#define	HIL_READBUSY		0x02	/* internal "busy" register */
-#define	HIL_READKBDLANG		0x12	/* read keyboard language code */
-#define	HIL_READKBDSADR	 	0xF9
-#define	HIL_WRITEKBDSADR 	0xE9
-#define	HIL_READLPSTAT  	0xFA
-#define	HIL_WRITELPSTAT 	0xEA
-#define	HIL_READLPCTRL  	0xFB
-#define	HIL_WRITELPCTRL 	0xEB
-
-/* BUSY bits */
-#define	BSY_LOOPBUSY	0x04
-
-/* LPCTRL bits */
-#define	LPC_AUTOPOLL	0x01	/* enable auto-polling */
-#define	LPC_NOERROR	0x02	/* don't report errors */
-#define	LPC_NORECONF	0x04	/* don't report reconfigure */
-#define	LPC_KBDCOOK	0x10	/* cook all keyboards */
-#define	LPC_RECONF	0x80	/* reconfigure the loop */
-
-/* LPSTAT bits */
-#define	LPS_DEVMASK	0x07	/* number of loop devices */
-#define	LPS_CONFGOOD	0x08	/* reconfiguration worked */
-#define	LPS_CONFFAIL	0x80	/* reconfiguration failed */
-
-/* HIL packet headers */
-#define	HIL_MOUSEDATA   0x2
-#define	HIL_KBDDATA     0x40
-
-#define	HIL_MOUSEMOTION	0x02	/* mouse movement event */
-#define	HIL_KBDBUTTON	0x40	/* keyboard button event */
-#define	HIL_MOUSEBUTTON 0x40	/* mouse button event */
-#define	HIL_BUTTONBOX   0x60	/* button box event */
-#define	HIL_TABLET      0x02	/* tablet motion event */
-#define	HIL_KNOBBOX     0x03	/* knob box motion data */
-
-/* For setting auto repeat on the keyboard */
-#define	ar_format(x)	~((x - 10) / 10)
-#define	KBD_ARD		400	/* initial delay in msec (10 - 2560) */
-#define	KBD_ARR		60	/* rate (10 - 2550 msec, 2551 == off) */
-
-/* Magic */
-#define	KBDNMISTAT	((volatile char *)IIOV(0x478005))
-#define	KBDNMI		0x04
-
-/* keyboard status */
-#define	KBD_CHARMASK	0x7F
-#define	KBD_CTRLSHIFT	0x8		/* key + CTRL + SHIFT */
-#define	KBD_CTRL	0x9		/* key + CTRL */
-#define	KBD_SHIFT	0xA		/* key + SHIFT */
-#define	KBD_KEY		0xB		/* key only */
-