summaryrefslogtreecommitdiff
path: root/sys/arch/sparc/conf
diff options
context:
space:
mode:
authorArtur Grabowski <art@cvs.openbsd.org>2001-05-10 12:57:21 +0000
committerArtur Grabowski <art@cvs.openbsd.org>2001-05-10 12:57:21 +0000
commit00c7bfc86077f60d16b11baf228c6b68f1675106 (patch)
tree6e407b0c5618685f60da35d02f6cf30d5f68d54e /sys/arch/sparc/conf
parentc05e68560981f2590b2d6f9b6e6efae61fb3e239 (diff)
Hasn't been used for ages. ZAP!
Diffstat (limited to 'sys/arch/sparc/conf')
-rw-r--r--sys/arch/sparc/conf/FLOPPY302
1 files changed, 0 insertions, 302 deletions
diff --git a/sys/arch/sparc/conf/FLOPPY b/sys/arch/sparc/conf/FLOPPY
deleted file mode 100644
index 20a15e20cf3..00000000000
--- a/sys/arch/sparc/conf/FLOPPY
+++ /dev/null
@@ -1,302 +0,0 @@
-# $OpenBSD: FLOPPY,v 1.20 1999/02/16 21:30:21 art Exp $
-# $NetBSD: GENERIC,v 1.28.2.1 1996/07/02 23:55:22 jtc Exp $
-
-# Machine architecture; required by config(8)
-machine sparc
-
-# maxusers means mostly "let's get small" in terms of kernel malloc's
-maxusers 2
-
-#option INSECURE # default to secure
-
-option TIMEZONE=0 # time zone to adjust RTC time by
-option DST=0 # daylight savings time used by RTC
-
-option SWAPPAGER # paging; REQUIRED
-option DEVPAGER # mmap() of devices
-
-#option DDB # in-kernel debugger
-#makeoption DEBUG="-g" # compile full symbol table
-#option DIAGNOSTIC # internal consistency checks
-#option KTRACE # system call tracing, a la ktrace(1)
-
-#option SYSVMSG # System V-like message queues
-#option SYSVSEM # System V-like semaphores
-#option SYSVSHM # System V-like memory sharing
-#option SHMMAXPGS=1024 # 1024 pages is the default
-
-option COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
-option COMPAT_09 # NetBSD 0.9,
-option COMPAT_10 # NetBSD 1.0,
-option COMPAT_11 # NetBSD 1.1,
-option COMPAT_43 # and 4.3BSD
-#option TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
-
-option LKM # loadable kernel modules
-
-option FFS # UFS
-#option QUOTA # UFS quotas
-option MFS # memory file system
-
-
-option NFSCLIENT # Network File System client
-#option NFSSERVER # Network File System server
-
-option CD9660 # ISO 9660 + Rock Ridge file system
-option MSDOSFS # MS-DOS file system
-option FDESC # /dev/fd
-option FIFO # FIFOs; RECOMMENDED
-option KERNFS # /kern
-#option NULLFS # loopback file system
-#option PORTAL # create sockets with open(2)
-option PROCFS # /proc
-#option UMAPFS # NULLFS + uid and gid remapping
-#option UNION # union file system
-
-#option GATEWAY # packet forwarding
-option INET # IP + ICMP + TCP + UDP
-#option NS # XNS
-#option NSIP # XNS tunneling over IP
-#option IPX # IPX+SPX
-#option IPXIP # IPX tunneling over IP
-#option ISO,TPIP # OSI
-#option EON # OSI tunneling over IP
-#option CCITT,LLC,HDLC # X.25
-#option IPFILTER # IP packet filter for security
-#option IPFILTER_LOG # use /dev/ipl to log IPF
-
-pseudo-device loop 1 # network loopback
-#pseudo-device bpfilter 8 # packet filter
-#pseudo-device sl 2 # CSLIP
-#pseudo-device ppp 2 # PPP
-#pseudo-device tun 2 # network tunneling over tty
-
-pseudo-device pty 64 # pseudo-terminals
-#pseudo-device tb 1 # tablet line discipline
-pseudo-device vnd 4 # paging to files
-pseudo-device ccd 4 # concatenated disk devices
-
-option BOOT_CONFIG # add support for boot -c
-
-# Options for variants of the Sun SPARC architecure.
-# At least one is required.
-#option SUN4 # sun4/100, sun4/200, sun4/300
-option SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc.
-option SUN4M # sun4m - SS10, SS20, Classic, etc.
-
-#option MMU_3L # 3-level MMU on sun4/400
-
-#option KGDB # support for kernel gdb
-#option KGDBDEV=0xc01 # kgdb device number (dev_t)
-#option KGDBRATE=38400 # baud rate
-
-# Options for SPARCstation hardware
-option RASTERCONSOLE # fast rasterop console
-
-# Generic swap; second partition of root disk or network.
-config bsd swap generic
-
-# Main bus and CPU .. all systems.
-mainbus0 at root
-cpu0 at mainbus0
-
-# Bus types found on SPARC systems.
-sbus0 at mainbus0 # sun4c
-obio0 at mainbus0 # sun4 and sun4m
-#vmes0 at mainbus0 # sun4
-#vmel0 at mainbus0 # sun4
-iommu0 at mainbus0 # sun4m
-sbus0 at iommu0 # sun4m
-
-#audioamd0 at mainbus0 # sun4c
-#audioamd0 at obio0 # sun4m
-#audio* at audioamd?
-
-auxreg0 at mainbus0 # sun4c
-auxreg0 at obio0 # sun4m
-
-# Power status and control register found on Sun4m systems
-#power0 at obio0
-
-# Mostek clock found on 4/300, sun4c, and sun4m systems.
-# The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
-clock0 at mainbus0 # sun4c
-clock0 at obio0 # sun4m
-#clock0 at obio0 addr 0xf2000000 # sun4/300
-
-# Intersil clock found on 4/100 and 4/200 systems.
-#oclock0 at obio0 addr 0xf3000000 # sun4/200
-#oclock0 at obio0 addr 0x03000000 # sun4/100
-
-# Memory error registers.
-memreg0 at mainbus0 # sun4c
-memreg0 at obio0 # sun4m
-#memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300
-#memreg0 at obio0 addr 0x04000000 # sun4/100
-
-# Timer chip found on 4/300, sun4c, and sun4m systems.
-timer0 at mainbus0 # sun4c
-timer0 at obio0 # sun4m
-#timer0 at obio0 addr 0xef000000 # sun4/300
-
-# EEPROM found on 4/100 and 4/200 systems. Note that the 4/300
-# doesn't use this driver; the `EEPROM' is in the NVRAM on the
-# Mostek clock chip on 4/300 systems.
-#eeprom0 at obio0 addr 0xf2000000 # sun4/200
-#eeprom0 at obio0 addr 0x02000000 # sun4/100
-
-# Zilog 8530 serial chips. Each has two-channels.
-# zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
-zs0 at mainbus0 # sun4c
-zs0 at obio0 # sun4m
-#zs0 at obio0 addr 0xf1000000 level 12 flags 0x103 # sun4/200 and sun4/300
-#zs0 at obio0 addr 0x01000000 level 12 flags 0x103 # sun4/100
-zs1 at mainbus0 # sun4c
-zs1 at obio0 # sun4m
-#zs1 at obio0 addr 0xf0000000 level 12 flags 0x103 # sun4/200 and sun4/300
-#zs1 at obio0 addr 0x00000000 level 12 flags 0x103 # sun4/100
-#zs2 at obio0 addr 0xe0000000 level 12 flags 0x103 # sun4/300
-
-#
-# Note the flags on the esp entries below, that work around
-# deficiencies in the current driver:
-# bits 0-7: disable disconnect/reselect for the corresponding target
-# bits 8-15: disable synch negotiation for target [bit-8]
-# Note: targets 4-7 have disconnect/reselect enabled on the premise
-# that tape devices normally have one of these targets. Tape
-# devices should be allowed to disconnect for the SCSI bus
-# to operate acceptably.
-#
-
-# sun4/300 SCSI - an NCR53c94 or equivalent behind
-# an LSI Logic DMA controller
-#dma0 at obio0 addr 0xfa001000 level 4 # sun4/300
-esp0 at obio0 addr 0xfa000000 level 4 flags 0xff0f #
-
-# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind
-# specialized DMA glue
-dma0 at sbus0 slot ? offset ? # on-board SCSI
-esp0 at sbus0 slot ? offset ? flags 0xff0f # sun4c
-esp0 at dma0 flags 0xff0f # sun4m
-
-# FSBE/S SCSI - an NCR53c94 or equivalent behind
-dma* at sbus? slot ? offset ? # SBus SCSI
-esp* at sbus? slot ? offset ? flags 0xff0f # two flavours
-esp* at dma? flags 0xff0f # depending on model
-
-# sun4m Ethernet - an AMD 7990 LANCE behind
-# specialized DMA glue
-ledma0 at sbus0 slot ? offset ? # sun4m on-board
-le0 at ledma0 #
-
-# Additional SBus LANCE devices - glued on by lebuffer (not yet implemented)
-#lebuffer* at sbus0 slot ? offset ? # sun4m SBus
-#le* at lebuffer? #
-
-# sun4/300 and sun4c Ethernet - an AMD 7990 LANCE
-le0 at sbus0 slot ? offset ? # sun4c on-board
-le* at sbus? slot ? offset ?
-
-#le0 at obio0 addr 0xf9000000 level 6 # sun4/300
-
-# sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board
-# or on a Multibus/VME card.
-#ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board
-#ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board
-
-#ie1 at vmes0 addr 0xffe88000 level 5 vect 0x75
-#ie2 at vmes0 addr 0xff31ff02 level 5 vect 0x76
-#ie3 at vmes0 addr 0xff35ff02 level 5 vect 0x77
-#ie4 at vmes0 addr 0xff2dff02 level 5 vect 0x7c
-
-# Xylogics 753 or 7053 VME SMD disk controllers and disks, found
-# on sun4 systems.
-#xdc0 at vmel0 addr 0xffffee80 level 3 vect 0x44
-#xdc1 at vmel0 addr 0xffffee90 level 3 vect 0x45
-#xdc2 at vmel0 addr 0xffffeea0 level 3 vect 0x46
-#xdc3 at vmel0 addr 0xffffeeb0 level 3 vect 0x47
-#xd* at xdc? drive ?
-
-# Xylogics 451 or 451 VME SMD disk controllers and disks, found
-# on sun4 systems.
-#xyc0 at vmes0 addr 0xffffee40 level 3 vect 0x48
-#xyc1 at vmes0 addr 0xffffee48 level 3 vect 0x49
-#xy* at xyc? drive ?
-
-# NCR5380-based "Sun SCSI 3" VME SCSI controller.
-# This driver has several flags which may be enabled by OR'ing
-# the values and using the "flags" directive.
-# Valid flags are:
-#
-# 0x01 Use DMA (may be polled)
-# 0x02 Use DMA completion interrupts
-# 0x04 Allow disconnect/reselect
-#
-# E.g. the following would enable DMA, interrupts, and reselect:
-# si0 at vmes0 addr 0xff200000 level 3 vect 0x40 flags 0x07
-#
-# By default, DMA is enabled in the driver.
-#si0 at vmes0 addr 0xff200000 level 3 vect 0x40
-
-# NCR5380-based "SCSI Weird" on-board SCSI interface found
-# on sun4/100 systems. The flags are the same as the "si"
-# controller. Note, while DMA is enabled by default, only
-# polled DMA works at this time, and reselects do not work
-# on this particular controller.
-#sw0 at obio0 addr 0x0a000000 level 3
-
-# Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
-# systems. If your sun4 system has a cgfour installed in the P4 slot,
-# the P4 entries for "bwtwo" will attach to the overlay plane of the
-# "cgfour".
-bwtwo0 at sbus0 slot ? offset ? # sun4c on-board
-bwtwo* at sbus? slot ? offset ? # sun4c and sun4m
-#bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200
-#bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot
-#bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot
-
-# Sun "cgtwo" VME color framebuffer
-#cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xa8
-
-# Sun "cgthree" Sbus color framebuffer
-cgthree0 at sbus? slot ? offset ?
-cgthree* at sbus? slot ? offset ?
-#cgthree0 at obio? slot ? offset ? # sun4m
-#cgthree* at obio? slot ? offset ? # sun4m
-
-# Sun "cgfour" color framebuffer with overlay plane. See above comment
-# regarding overlay plane.
-#cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4
-#cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4
-
-# Sun "cgsix" accelerated color framebuffer.
-cgsix0 at sbus? slot ? offset ?
-cgsix* at sbus? slot ? offset ?
-#cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4
-#cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4
-
-# Sun "cgeight" 24-bit framebuffer
-#cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4
-#cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4
-
-# SCSI bus layer. SCSI devices attach to the SCSI bus, which attaches
-# to the underlying hardware controller.
-scsibus* at esp?
-#scsibus* at si?
-#scsibus* at sw?
-
-# These entries find devices on all SCSI busses and assign
-# unit numers dynamically.
-sd* at scsibus? target ? lun ? # SCSI disks
-st* at scsibus? target ? lun ? # SCSI tapes
-cd* at scsibus? target ? lun ? # SCSI CD-ROMs
-#ch* at scsibus? target ? lun ? # SCSI changer devices
-
-# Floppy controller and drive found on SPARCstations.
-fdc0 at mainbus0 # sun4c controller
-fdc0 at obio0 # sun4m controller
-fd* at fdc0 # the drive itself
-
-pseudo-device kbd # Sun keyboard
-#pseudo-device strip 1 # radio clock
-