p9100 console driver for tadpole 3g[sx] (based on cgthree.c and netbsd's

driver).  Needs clean-up.

5 files changed, 501 insertions, 4 deletions

diff --git a/sys/arch/sparc/conf/GENERIC b/sys/arch/sparc/conf/GENERIC
index 39304c96993..356b757210b 100644
--- a/sys/arch/sparc/conf/GENERIC
+++ b/sys/arch/sparc/conf/GENERIC
@@ -1,4 +1,4 @@
-#	$OpenBSD: GENERIC,v 1.43 1999/07/23 19:13:07 jason Exp $
+#	$OpenBSD: GENERIC,v 1.44 1999/09/06 03:46:16 jason Exp $
 # 	$NetBSD: GENERIC,v 1.48 1997/08/23 19:19:01 mjacob Exp $
 
 # Machine architecture; required by config(8)
@@ -259,6 +259,9 @@ tcx*	at sbus? slot ? offset ?
 # Sun "cgfourteen" accelerated 24-bit framebuffer.
 cgfourteen0	at obio0			# sun4m
 
+# Weitek p9100 found on Tadpole 3GS/3GX
+pnozz0	at sbus? slot ? offset ?
+
 # SCSI bus layer.  SCSI devices attach to the SCSI bus, which attaches
 # to the underlying hardware controller.
 scsibus* at esp?
diff --git a/sys/arch/sparc/conf/GENERIC_SCSI3 b/sys/arch/sparc/conf/GENERIC_SCSI3
index ce2430079e3..7a5948f9768 100644
--- a/sys/arch/sparc/conf/GENERIC_SCSI3
+++ b/sys/arch/sparc/conf/GENERIC_SCSI3
@@ -1,4 +1,4 @@
-#	$OpenBSD: GENERIC_SCSI3,v 1.29 1999/06/06 04:48:24 jason Exp $
+#	$OpenBSD: GENERIC_SCSI3,v 1.30 1999/09/06 03:46:16 jason Exp $
 # 	$NetBSD: GENERIC,v 1.28.2.1 1996/07/02 23:55:22 jtc Exp $
 
 # Machine architecture; required by config(8)
@@ -255,6 +255,9 @@ tcx*	at sbus? slot ? offset ?
 # Sun "cgfourteen" accelerated 24-bit framebuffer.
 cgfourteen0	at obio0			# sun4m
 
+# Weitek p9100 found on Tadpole 3GS/3GX
+pnozz0	at sbus? slot ? offset ?
+
 # SCSI bus layer.  SCSI devices attach to the SCSI bus, which attaches
 # to the underlying hardware controller.
 scsibus* at esp?
diff --git a/sys/arch/sparc/conf/SUN4M b/sys/arch/sparc/conf/SUN4M
index 57ec02380fd..511391c223f 100644
--- a/sys/arch/sparc/conf/SUN4M
+++ b/sys/arch/sparc/conf/SUN4M
@@ -1,4 +1,4 @@
-#	$OpenBSD: SUN4M,v 1.31 1999/06/06 04:48:24 jason Exp $
+#	$OpenBSD: SUN4M,v 1.32 1999/09/06 03:46:16 jason Exp $
 # 	$NetBSD: GENERIC,v 1.28.2.1 1996/07/02 23:55:22 jtc Exp $
 
 # Machine architecture; required by config(8)
@@ -144,6 +144,9 @@ tcx*	at sbus? slot ? offset ?
 # Sun "cgfourteen" accelerated 24-bit framebuffer.
 cgfourteen0	at obio0			# sun4m
 
+# Weitek p9100 found on Tadpole 3GS/3GX
+pnozz0	at sbus? slot ? offset ?
+
 # SCSI bus layer.  SCSI devices attach to the SCSI bus, which attaches
 # to the underlying hardware controller.
 scsibus* at esp?
diff --git a/sys/arch/sparc/conf/files.sparc b/sys/arch/sparc/conf/files.sparc
index 5b757ddf602..f79f511a3a7 100644
--- a/sys/arch/sparc/conf/files.sparc
+++ b/sys/arch/sparc/conf/files.sparc
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.sparc,v 1.32 1999/08/17 22:47:15 mickey Exp $
+#	$OpenBSD: files.sparc,v 1.33 1999/09/06 03:46:16 jason Exp $
 #	$NetBSD: files.sparc,v 1.44 1997/08/31 21:29:16 pk Exp $
 
 # @(#)files.sparc	8.1 (Berkeley) 7/19/93
@@ -173,6 +173,11 @@ file	arch/sparc/dev/cgfourteen.c	cgfourteen needs-flag
 
 file	arch/sparc/dev/bt_subr.c	bt_dac
 
+# Onboard Weitek p9100 found on Tadpole 3GS/3GX
+device pnozz
+attach pnozz at sbus: bt_dac
+file	arch/sparc/dev/p9100.c		pnozz needs-flag
+
 # device definition in sys/conf/files
 attach le at sbus, ledma, lebuffer, obio
 file	arch/sparc/dev/if_le.c		le
diff --git a/sys/arch/sparc/dev/p9100.c b/sys/arch/sparc/dev/p9100.c
new file mode 100644
index 00000000000..418f17be99f
--- /dev/null
+++ b/sys/arch/sparc/dev/p9100.c
@@ -0,0 +1,483 @@
+/*	$OpenBSD: p9100.c,v 1.1 1999/09/06 03:46:16 jason Exp $	*/
+
+/*
+ * Copyright (c) 1999 Jason L. Wright (jason@thought.net)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Jason L. Wright
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * color display (p9100) driver.  Based on cgthree.c and the NetBSD
+ * p9100 driver.
+ *
+ * Does not handle interrupts, even though they can occur.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/buf.h>
+#include <sys/device.h>
+#include <sys/ioctl.h>
+#include <sys/malloc.h>
+#include <sys/mman.h>
+#include <sys/tty.h>
+#include <sys/conf.h>
+
+#include <vm/vm.h>
+
+#include <machine/fbio.h>
+#include <machine/autoconf.h>
+#include <machine/pmap.h>
+#include <machine/fbvar.h>
+#include <machine/cpu.h>
+#include <machine/conf.h>
+
+#include <sparc/dev/btreg.h>
+#include <sparc/dev/btvar.h>
+#include <sparc/dev/sbusvar.h>
+
+/* per-display variables */
+struct p9100_softc {
+	struct	device sc_dev;		/* base device */
+	struct	sbusdev sc_sd;		/* sbus device */
+	struct	fbdevice sc_fb;		/* frame buffer device */
+	struct	rom_reg	sc_phys;	/* phys address description */
+	struct	p9100_cmd *sc_cmd;	/* command registers (dac, etc) */
+	struct	p9100_ctl *sc_ctl;	/* control registers (draw engine) */
+	union	bt_cmap sc_cmap;	/* Brooktree color map */
+	u_int32_t	sc_junk;	/* throwaway value */
+};
+
+/* autoconfiguration driver */
+void	p9100attach(struct device *, struct device *, void *);
+int	p9100match(struct device *, void *, void *);
+void	p9100unblank(struct device *);
+
+/* cdevsw prototypes */
+cdev_decl(p9100);
+
+struct cfattach pnozz_ca = {
+	sizeof(struct p9100_softc), p9100match, p9100attach
+};
+
+struct cfdriver pnozz_cd = {
+	NULL, "pnozz", DV_DULL
+};
+
+/* frame buffer generic driver */
+struct fbdriver p9100fbdriver = {
+	p9100unblank, p9100open, p9100close, p9100ioctl, p9100mmap
+};
+
+extern int fbnode;
+extern struct tty *fbconstty;
+
+void p9100loadcmap __P((struct p9100_softc *, int, int));
+void p9100_set_video __P((struct p9100_softc *, int));
+int p9100_get_video __P((struct p9100_softc *));
+
+/*
+ * System control and command registers
+ * (IBM RGB528 RamDac, p9100, video coprocessor)
+ */
+struct p9100_ctl {
+	/* System control registers: 0x0000 - 0x00ff */
+	struct p9100_scr {
+		volatile u_int32_t	unused0;
+		volatile u_int32_t	scr;		/* system config reg */
+		volatile u_int32_t	ir;		/* interrupt reg */
+		volatile u_int32_t	ier;		/* interrupt enable */
+		volatile u_int32_t	arbr;		/* alt read bank reg */
+		volatile u_int32_t	awbr;		/* alt write bank reg */
+		volatile u_int32_t	unused1[58];
+	} ctl_scr;
+
+	/* Video control registers: 0x0100 - 0x017f */
+	struct p9100_vcr {
+		volatile u_int32_t	unused0;
+		volatile u_int32_t	hcr;		/* horizontal cntr */
+		volatile u_int32_t	htr;		/* horizontal total */
+		volatile u_int32_t	hsre;		/* horiz sync rising */
+		volatile u_int32_t	hbre;		/* horiz blank rising */
+		volatile u_int32_t	hbfe;		/* horiz blank fallng */
+		volatile u_int32_t	hcp;		/* horiz cntr preload */
+		volatile u_int32_t	vcr;		/* vertical cntr */
+		volatile u_int32_t	vl;		/* vertical length */
+		volatile u_int32_t	vsre;		/* vert sync rising */
+		volatile u_int32_t	vbre;		/* vert blank rising */
+		volatile u_int32_t	vbfe;		/* vert blank fallng */
+		volatile u_int32_t	vcp;		/* vert cntr preload */
+		volatile u_int32_t	sra;		/* scrn repaint addr */
+		volatile u_int32_t	srtc1;		/* scrn rpnt time 1 */
+		volatile u_int32_t	qsf;		/* qsf counter */
+		volatile u_int32_t	srtc2;		/* scrn rpnt time 2 */
+		volatile u_int32_t	unused1[15];
+	} ctl_vcr;
+
+	/* VRAM control registers: 0x0180 - 0x1ff */
+	struct p9100_vram {
+		volatile u_int32_t	unused0;
+		volatile u_int32_t	mc;		/* memory config */
+		volatile u_int32_t	rp;		/* refresh period */
+		volatile u_int32_t	rc;		/* refresh count */
+		volatile u_int32_t	rasmax;		/* ras low maximum */
+		volatile u_int32_t	rascur;		/* ras low current */
+		volatile u_int32_t	unused1[26];
+	} ctl_vram;
+
+	/* IBM RGB528 RAMDAC registers: 0x0200 - 0x3ff */
+	struct p9100_dac {
+		volatile u_int32_t	pwraddr;	/* wr palette address */
+		volatile u_int32_t	paldata;	/* palette data */
+		volatile u_int32_t	pixmask;	/* pixel mask */
+		volatile u_int32_t	prdaddr;	/* rd palette address */
+		volatile u_int32_t	idxlow;		/* reg index low */
+		volatile u_int32_t	idxhigh;	/* reg index high */
+		volatile u_int32_t	regdata;	/* register data */
+		volatile u_int32_t	idxctrl;	/* index control */
+		volatile u_int32_t	unused1[120];
+	} ctl_dac;
+
+	/* Video coprocessor interface: 0x0400 - 0x1fff */
+	volatile u_int32_t	ctl_vci[768];
+};
+
+#define	SRTC1_VIDEN	0x00000020
+
+
+/*
+ * Select the appropriate register group within the control registers
+ * (must be done before any write to a register within the group, but
+ * subsquent writes to the same group do not need to reselect).
+ */
+#define	P9100_SELECT_SCR(sc)	((sc)->sc_junk = (sc)->sc_ctl->ctl_scr.scr)
+#define	P9100_SELECT_VCR(sc)	((sc)->sc_junk = (sc)->sc_ctl->ctl_vcr.hcr)
+#define	P9100_SELECT_VRAM(sc)	((sc)->sc_junk = (sc)->sc_ctl->ctl_vram.mc)
+#define	P9100_SELECT_DAC(sc)	((sc)->sc_junk = (sc)->sc_ctl->ctl_dac.pwraddr)
+#define	P9100_SELECT_VCI(sc)	((sc)->sc_junk = (sc)->sc_ctl->ctl_vci[0])
+
+/*
+ * Drawing engine
+ */
+struct p9100_cmd {
+	volatile u_int32_t	cmd_regs[0x800];
+};
+
+int
+p9100match(parent, vcf, aux)
+	struct device *parent;
+	void *vcf, *aux;
+{
+	struct confargs *ca = aux;
+	register struct romaux *ra = &ca->ca_ra;
+
+	if (strcmp("p9100", ra->ra_name))
+		return (0);
+	return (1);
+}
+
+/*
+ * Attach a display.  We need to notice if it is the console, too.
+ */
+void
+p9100attach(parent, self, args)
+	struct device *parent, *self;
+	void *args;
+{
+	struct p9100_softc *sc = (struct p9100_softc *)self;
+	struct confargs *ca = args;
+	int node = 0, i;
+	int isconsole;
+	char *cp;
+
+	sc->sc_fb.fb_driver = &p9100fbdriver;
+	sc->sc_fb.fb_device = &sc->sc_dev;
+	sc->sc_fb.fb_flags = sc->sc_dev.dv_cfdata->cf_flags & FB_USERMASK;
+	sc->sc_fb.fb_type.fb_type = FBTYPE_SUN3COLOR;
+
+	sc->sc_phys = ca->ca_ra.ra_reg[2];
+
+	sc->sc_ctl = mapiodev(&(ca->ca_ra.ra_reg[0]), 0,
+	    ca->ca_ra.ra_reg[0].rr_len);
+	sc->sc_cmd = mapiodev(&(ca->ca_ra.ra_reg[1]), 0,
+	    ca->ca_ra.ra_reg[1].rr_len);
+
+	/*
+	 * When the ROM has mapped in a p9100 display, the address
+	 * maps only the video RAM, so in any case we have to map the
+	 * registers ourselves.  We only need the video RAM if we are
+	 * going to print characters via rconsole.
+	 */
+	node = ca->ca_ra.ra_node;
+	isconsole = node == fbnode && fbconstty != NULL;
+	if (ca->ca_ra.ra_nvaddrs > 0)
+		sc->sc_fb.fb_pixels = ca->ca_ra.ra_vaddrs[0];
+	if (isconsole && sc->sc_fb.fb_pixels == NULL)
+		sc->sc_fb.fb_pixels = mapiodev(&(ca->ca_ra.ra_reg[2]), 0,
+		    ca->ca_ra.ra_reg[2].rr_len);
+
+	P9100_SELECT_SCR(sc);
+	i = sc->sc_ctl->ctl_scr.scr;
+	printf(":%08x", i);
+	switch ((i >> 26) & 7) {
+	case 5:
+		sc->sc_fb.fb_type.fb_depth = 32;
+		break;
+	case 7:
+		sc->sc_fb.fb_type.fb_depth = 24;
+		break;
+	case 3:
+		sc->sc_fb.fb_type.fb_depth = 16;
+		break;
+	case 2:
+	default:
+		sc->sc_fb.fb_type.fb_depth = 8;
+		break;
+	}
+	fb_setsize(&sc->sc_fb, sc->sc_fb.fb_type.fb_depth, 800, 600,
+	    node, ca->ca_bustype);
+
+	sbus_establish(&sc->sc_sd, &sc->sc_dev);
+
+	sc->sc_fb.fb_type.fb_cmsize = getpropint(node, "cmsize", 256);
+	sc->sc_fb.fb_type.fb_size =
+	    sc->sc_fb.fb_type.fb_height * sc->sc_fb.fb_linebytes;
+	printf(": rev %x, %d x %d, depth %d", i,
+	    sc->sc_fb.fb_type.fb_width, sc->sc_fb.fb_type.fb_height,
+	    sc->sc_fb.fb_type.fb_depth);
+
+	/* initialize color map */
+	cp = &sc->sc_cmap.cm_map[0][0];
+	cp[0] = cp[1] = cp[2] = 0;
+	for (i = 1, cp = &sc->sc_cmap.cm_map[i][0];
+	     i < sc->sc_fb.fb_type.fb_cmsize; cp += 3, i++)
+		cp[0] = cp[1] = cp[2] = 0xff;
+	p9100loadcmap(sc, 0, 256);
+
+	/* make sure we are not blanked */
+	p9100_set_video(sc, 1);
+
+	if (isconsole) {
+		printf(" (console)\n");
+#ifdef RASTERCONSOLE
+		for (i = 0 ; i < sc->sc_fb.fb_type.fb_size; i++) {
+			if (sc->sc_fb.fb_pixels[i] == 0) {
+				sc->sc_fb.fb_pixels[i] = 1;
+			} else if (sc->sc_fb.fb_pixels[i] == (char) 255) {
+				sc->sc_fb.fb_pixels[i] = 0;
+			}
+		}
+		p9100loadcmap(sc, 255, 1);
+		fbrcons_init(&sc->sc_fb);
+#endif
+	} else
+		printf("\n");
+
+	if (node == fbnode)
+		fb_attach(&sc->sc_fb, isconsole);
+}
+
+int
+p9100open(dev, flags, mode, p)
+	dev_t dev;
+	int flags, mode;
+	struct proc *p;
+{
+	int unit = minor(dev);
+
+	if (unit >= pnozz_cd.cd_ndevs || pnozz_cd.cd_devs[unit] == NULL)
+		return (ENXIO);
+	return (0);
+}
+
+int
+p9100close(dev, flags, mode, p)
+	dev_t dev;
+	int flags, mode;
+	struct proc *p;
+{
+	return (0);
+}
+
+int
+p9100ioctl(dev, cmd, data, flags, p)
+	dev_t dev;
+	u_long cmd;
+	caddr_t data;
+	int flags;
+	struct proc *p;
+{
+	struct p9100_softc *sc = pnozz_cd.cd_devs[minor(dev)];
+	struct fbgattr *fba;
+	int error;
+
+	switch (cmd) {
+
+	case FBIOGTYPE:
+		*(struct fbtype *)data = sc->sc_fb.fb_type;
+		break;
+
+	case FBIOGATTR:
+		fba = (struct fbgattr *)data;
+		fba->real_type = sc->sc_fb.fb_type.fb_type;
+		fba->owner = 0;		/* XXX ??? */
+		fba->fbtype = sc->sc_fb.fb_type;
+		fba->sattr.flags = 0;
+		fba->sattr.emu_type = sc->sc_fb.fb_type.fb_type;
+		fba->sattr.dev_specific[0] = -1;
+		fba->emu_types[0] = sc->sc_fb.fb_type.fb_type;
+		fba->emu_types[1] = -1;
+		break;
+
+	case FBIOGETCMAP:
+		return (bt_getcmap((struct fbcmap *)data, &sc->sc_cmap, 256));
+
+	case FBIOPUTCMAP:
+		/* copy to software map */
+#define p ((struct fbcmap *)data)
+		error = bt_putcmap(p, &sc->sc_cmap, 256);
+		if (error)
+			return (error);
+		/* now blast them into the chip */
+		/* XXX should use retrace interrupt */
+		p9100loadcmap(sc, p->index, p->count);
+#undef p
+		break;
+
+	case FBIOGVIDEO:
+		*(int *)data = p9100_get_video(sc);
+		break;
+
+	case FBIOSVIDEO:
+		p9100_set_video(sc, *(int *)data);
+		break;
+
+	default:
+		return (ENOTTY);
+	}
+	return (0);
+}
+
+/*
+ * Undo the effect of an FBIOSVIDEO that turns the video off.
+ */
+void
+p9100unblank(dev)
+	struct device *dev;
+{
+	p9100_set_video((struct p9100_softc *)dev, 1);
+}
+
+void
+p9100_set_video(sc, enable)
+	struct p9100_softc *sc;
+	int enable;
+{
+	u_int32_t v;
+
+	P9100_SELECT_VCR(sc);
+	v = sc->sc_ctl->ctl_vcr.srtc1;
+	if (enable)
+		v |= SRTC1_VIDEN;
+	else
+		v &= ~SRTC1_VIDEN;
+	sc->sc_ctl->ctl_vcr.srtc1 = v;
+}
+
+int
+p9100_get_video(sc)
+	struct p9100_softc *sc;
+{
+	return ((sc->sc_ctl->ctl_vcr.srtc1 & SRTC1_VIDEN) != 0);
+}
+
+/*
+ * Load a subset of the current (new) colormap into the Brooktree DAC.
+ */
+void
+p9100loadcmap(sc, start, ncolors)
+	struct p9100_softc *sc;
+	int start, ncolors;
+{
+	u_char *p;
+
+	P9100_SELECT_VRAM(sc);
+	P9100_SELECT_VRAM(sc);
+	sc->sc_junk = sc->sc_ctl->ctl_dac.pwraddr;
+	sc->sc_ctl->ctl_dac.pwraddr = start << 16;
+
+	for (p = sc->sc_cmap.cm_map[start], ncolors *= 3; ncolors-- > 0; p++) {
+		/* These generate a short delay between ramdac writes */
+		P9100_SELECT_VRAM(sc);
+		P9100_SELECT_VRAM(sc);
+
+		sc->sc_junk = sc->sc_ctl->ctl_dac.paldata;
+		sc->sc_ctl->ctl_dac.paldata = (*p) << 16;
+	}
+}
+
+/*
+ * Return the address that would map the given device at the given
+ * offset, allowing for the given protection, or return -1 for error.
+ *
+ * The cg3 is mapped starting at 256KB, for pseudo-compatibility with
+ * the cg4 (which had an overlay plane in the first 128K and an enable
+ * plane in the next 128K).  X11 uses only 256k+ region but tries to
+ * map the whole thing, so we repeatedly map the first 256K to the
+ * first page of the color screen.  If someone tries to use the overlay
+ * and enable regions, they will get a surprise....
+ *
+ * As well, mapping at an offset of 0x04000000 causes the cg3 to be
+ * mapped in flat mode without the cg4 emulation.
+ */
+int
+p9100mmap(dev, off, prot)
+	dev_t dev;
+	int off, prot;
+{
+	struct p9100_softc *sc = pnozz_cd.cd_devs[minor(dev)];
+#define START		(128*1024 + 128*1024)
+#define NOOVERLAY	(0x04000000)
+
+	if (off & PGOFSET)
+		panic("p9100mmap");
+
+	if (off < 0)
+		return (-1);
+#define	CG3_MMAP_OFFSET 0x04000000
+	/*
+	 * Make Xsun think we are a CG3 (SUN3COLOR)
+	 */
+	if ((u_int)off >= CG3_MMAP_OFFSET &&
+	    (u_int)off < CG3_MMAP_OFFSET + 0x00200000) {
+		off -= CG3_MMAP_OFFSET;
+		return (REG2PHYS(&sc->sc_phys, off | PMAP_NC));
+	}
+
+	return (-1);
+}