Add 12160 (Ultra3) support. Add files and changes for target mode support.

Do some SNS fabric suppor tchanges. Roll revision levels. Tested on
GENERIC i386 && sparc.

1 files changed, 1228 insertions, 0 deletions

diff --git a/sys/dev/ic/isp_target.c b/sys/dev/ic/isp_target.c
new file mode 100644
index 00000000000..bd7a4824e2b
--- /dev/null
+++ b/sys/dev/ic/isp_target.c
@@ -0,0 +1,1228 @@
+/* $OpenBSD: isp_target.c,v 1.1 2000/02/20 21:22:40 mjacob Exp $ */
+/*
+ * Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
+ *
+ * Copyright (c) 1999 by Matthew Jacob
+ * All rights reserved.
+ * mjacob@feral.com
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice immediately at the beginning of the file, without modification,
+ *    this list of conditions, and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Include header file appropriate for platform we're building on.
+ */
+
+#ifdef	__NetBSD__
+#include <dev/ic/isp_netbsd.h>
+#endif
+#ifdef	__FreeBSD__
+#include <dev/isp/isp_freebsd.h>
+#endif
+#ifdef	__OpenBSD__
+#include <dev/ic/isp_openbsd.h>
+#endif
+#ifdef	__linux__
+#include "isp_linux.h"
+#endif
+
+#ifdef	ISP_TARGET_MODE
+int isp_tdebug = 0;
+
+static void isp_got_msg __P((struct ispsoftc *, int, in_entry_t *));
+static void isp_got_msg_fc __P((struct ispsoftc *, int, in_fcentry_t *));
+static void isp_notify_ack __P((struct ispsoftc *, void *));
+static void isp_handle_atio(struct ispsoftc *, at_entry_t *);
+static void isp_handle_atio2(struct ispsoftc *, at2_entry_t *);
+static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *);
+static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);
+
+/*
+ * The Qlogic driver gets an interrupt to look at response queue entries.
+ * Some of these are status completions for initiatior mode commands, but
+ * if target mode is enabled, we get a whole wad of response queue entries
+ * to be handled here.
+ *
+ * Basically the split into 3 main groups: Lun Enable/Modification responses,
+ * SCSI Command processing, and Immediate Notification events.
+ *
+ * You start by writing a request queue entry to enable target mode (and
+ * establish some resource limitations which you can modify later).
+ * The f/w responds with a LUN ENABLE or LUN MODIFY response with
+ * the status of this action. If the enable was successful, you can expect...
+ *
+ * Response queue entries with SCSI commands encapsulate show up in an ATIO
+ * (Accept Target IO) type- sometimes with enough info to stop the command at
+ * this level. Ultimately the driver has to feed back to the f/w's request
+ * queue a sequence of CTIOs (continue target I/O) that describe data to
+ * be moved and/or status to be sent) and finally finishing with sending
+ * to the f/w's response queue an ATIO which then completes the handshake
+ * with the f/w for that command. There's a lot of variations on this theme,
+ * including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
+ * cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
+ * gist of it.
+ *
+ * The third group that can show up in the response queue are Immediate
+ * Notification events. These include things like notifications of SCSI bus
+ * resets, or Bus Device Reset messages or other messages received. This
+ * a classic oddbins area. It can get  a little wierd because you then turn
+ * around and acknowledge the Immediate Notify by writing an entry onto the
+ * request queue and then the f/w turns around and gives you an acknowledgement
+ * to *your* acknowledgement on the response queue (the idea being to let
+ * the f/w tell you when the event is *really* over I guess).
+ *
+ */
+
+
+/*
+ * A new response queue entry has arrived. The interrupt service code
+ * has already swizzled it into the platform dependent from canonical form.
+ *
+ * Because of the way this driver is designed, unfortunately most of the
+ * actual synchronization work has to be done in the platform specific
+ * code- we have no synchroniation primitives in the common code.
+ */
+
+int
+isp_target_notify(isp, vptr, optrp)
+	struct ispsoftc *isp;
+	void *vptr;
+	u_int16_t *optrp;
+{
+	u_int16_t status, seqid;
+	union {
+		at_entry_t	*atiop;
+		at2_entry_t	*at2iop;
+		ct_entry_t	*ctiop;
+		ct2_entry_t	*ct2iop;
+		lun_entry_t	*lunenp;
+		in_entry_t	*inotp;
+		in_fcentry_t	*inot_fcp;
+		na_entry_t	*nackp;
+		na_fcentry_t	*nack_fcp;
+		isphdr_t	*hp;
+		void *		*vp;
+#define	atiop		unp.atiop
+#define	at2iop		unp.at2iop
+#define	ctiop		unp.ctiop
+#define	ct2iop		unp.ct2iop
+#define	lunenp		unp.lunenp
+#define	inotp		unp.inotp
+#define	inot_fcp	unp.inot_fcp
+#define	nackp		unp.nackp
+#define	nack_fcp	unp.nack_fcp
+#define	hdrp		unp.hp
+	} unp;
+	int bus, rval = 0;
+
+	unp.vp = vptr;
+
+	ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr);
+
+	switch(hdrp->rqs_entry_type) {
+	case RQSTYPE_ATIO:
+		isp_handle_atio(isp, atiop);
+		break;
+	case RQSTYPE_CTIO:
+		isp_handle_ctio(isp, ctiop);
+		break;
+	case RQSTYPE_ATIO2:
+		isp_handle_atio2(isp, at2iop);
+		break;
+	case RQSTYPE_CTIO2:
+		isp_handle_ctio2(isp, ct2iop);
+		break;
+	case RQSTYPE_ENABLE_LUN:
+	case RQSTYPE_MODIFY_LUN:
+		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, vptr);
+		break;
+
+	case RQSTYPE_NOTIFY:
+		/*
+		 * Either the ISP received a SCSI message it can't
+		 * handle, or it's returning an Immed. Notify entry
+		 * we sent. We can send Immed. Notify entries to
+		 * increment the firmware's resource count for them
+		 * (we set this initially in the Enable Lun entry).
+		 */
+		bus = 0;
+		if (IS_FC(isp)) {
+			status = inot_fcp->in_status;
+			seqid = inot_fcp->in_seqid;
+		} else {
+			status = inotp->in_status & 0xff;
+			seqid = inotp->in_seqid;
+			if (IS_DUALBUS(isp)) {
+				bus = (inotp->in_iid & 0x80) >> 7;
+				inotp->in_iid &= ~0x80;
+			}
+		}
+		ITDEBUG(2, ("isp_target_notify: Immediate Notify, "
+		    "status=0x%x seqid=0x%x\n", status, seqid));
+		switch (status) {
+		case IN_RESET:
+			(void) isp_async(isp, ISPASYNC_BUS_RESET, &bus);
+			break;
+		case IN_MSG_RECEIVED:
+		case IN_IDE_RECEIVED:
+			if (IS_FC(isp)) {
+				isp_got_msg_fc(isp, bus, vptr);
+			} else {
+				isp_got_msg(isp, bus, vptr);
+			}
+			break;
+		case IN_RSRC_UNAVAIL:
+			PRINTF("%s: Firmware out of ATIOs\n", isp->isp_name);
+			break;
+		case IN_ABORT_TASK:
+			PRINTF("%s: Abort Task for Initiator %d RX_ID 0x%x\n",
+			    isp->isp_name, inot_fcp->in_iid, seqid);
+			break;
+		case IN_PORT_LOGOUT:
+			PRINTF("%s: Port Logout for Initiator %d RX_ID 0x%x\n",
+			    isp->isp_name, inot_fcp->in_iid, seqid);
+			break;
+		case IN_PORT_CHANGED:
+			PRINTF("%s: Port Changed for Initiator %d RX_ID 0x%x\n",
+			    isp->isp_name, inot_fcp->in_iid, seqid);
+			break;
+		case IN_GLOBAL_LOGO:
+			PRINTF("%s: All ports logged out\n", isp->isp_name);
+			break;
+		default:
+			PRINTF("%s: bad status (0x%x) in isp_target_notify\n",
+			    isp->isp_name, status);
+			break;
+		}
+		isp_notify_ack(isp, vptr);
+		break;
+
+	case RQSTYPE_NOTIFY_ACK:
+		/*
+		 * The ISP is acknowledging our acknowledgement of an
+		 * Immediate Notify entry for some asynchronous event.
+		 */
+		if (IS_FC(isp)) {
+			ITDEBUG(2, ("%s: Notify Ack status=0x%x seqid 0x%x\n",
+			    isp->isp_name, nack_fcp->na_status,
+			    nack_fcp->na_seqid));
+		} else {
+			ITDEBUG(2, ("%s: Notify Ack event 0x%x status=0x%x "
+			    "seqid 0x%x\n", isp->isp_name, nackp->na_event,
+			    nackp->na_status, nackp->na_seqid));
+		}
+		break;
+	default:
+		PRINTF("%s: Unknown entry type 0x%x in isp_target_notify",
+		    isp->isp_name, hdrp->rqs_entry_type);
+		rval = -1;
+		break;
+	}
+#undef	atiop
+#undef	at2iop
+#undef	ctiop
+#undef	ct2iop
+#undef	lunenp
+#undef	inotp
+#undef	inot_fcp
+#undef	nackp
+#undef	nack_fcp
+#undef	hdrp
+	return (rval);
+}
+
+ 
+/*
+ * Toggle (on/off) target mode for bus/target/lun
+ *
+ * The caller has checked for overlap and legality.
+ *
+ * Note that not all of bus, target or lun can be paid attention to.
+ * Note also that this action will not be complete until the f/w writes
+ * response entry. The caller is responsible for synchronizing this.
+ */
+int
+isp_lun_cmd(isp, cmd, bus, tgt, lun, opaque)
+	struct ispsoftc *isp;
+	int cmd;
+	int bus;
+	int tgt;
+	int lun;
+	u_int32_t opaque;
+{
+	lun_entry_t el;
+	u_int16_t iptr, optr;
+	void *outp;
+
+
+	MEMZERO(&el, sizeof (el));
+	if (IS_DUALBUS(isp)) {
+		el.le_rsvd = (bus & 0x1) << 7;
+	}
+	el.le_cmd_count = DFLT_CMD_CNT;
+	el.le_in_count = DFLT_INOTIFY;
+	if (cmd == RQSTYPE_ENABLE_LUN) {
+		if (IS_SCSI(isp)) {
+			el.le_flags = LUN_TQAE;
+			el.le_cdb6len = 12;
+			el.le_cdb7len = 12;
+		}
+	} else if (cmd == -RQSTYPE_ENABLE_LUN) {
+		cmd = RQSTYPE_ENABLE_LUN;
+		el.le_cmd_count = 0;
+		el.le_in_count = 0;
+	} else if (cmd == -RQSTYPE_MODIFY_LUN) {
+		cmd = RQSTYPE_MODIFY_LUN;
+		el.le_ops = LUN_CCDECR | LUN_INDECR;
+	} else {
+		el.le_ops = LUN_CCINCR | LUN_ININCR;
+	}
+	el.le_header.rqs_entry_type = cmd;
+	el.le_header.rqs_entry_count = 1;
+	el.le_reserved = opaque;
+	if (IS_SCSI(isp)) {
+		el.le_tgt = tgt;
+		el.le_lun = lun;
+#ifndef	ISP2100_SCCLUN
+	} else {
+		el.le_lun = lun;
+#endif
+	}
+
+	if (isp_getrqentry(isp, &iptr, &optr, &outp)) {
+		PRINTF("%s: Request Queue Overflow in isp_lun_cmd\n",
+		    isp->isp_name);
+		return (-1);
+	}
+	ISP_SWIZ_ENABLE_LUN(isp, outp, &el);
+	ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el);
+	ISP_ADD_REQUEST(isp, iptr);
+	return (0);
+}
+
+
+int
+isp_target_put_entry(isp, ap)
+	struct ispsoftc *isp;
+	void *ap;
+{
+	void *outp;
+	u_int16_t iptr, optr;
+	u_int8_t etype = ((isphdr_t *) ap)->rqs_entry_type;
+
+	if (isp_getrqentry(isp, &iptr, &optr, &outp)) {
+		PRINTF("%s: Request Queue Overflow in isp_target_put_entry "
+		    "for type 0x%x\n", isp->isp_name, etype);
+		return (-1);
+	}
+	switch (etype) {
+	case RQSTYPE_ATIO:
+		ISP_SWIZ_ATIO(isp, outp, ap);
+		break;
+	case RQSTYPE_ATIO2:
+		ISP_SWIZ_ATIO2(isp, outp, ap);
+		break;
+	case RQSTYPE_CTIO:
+		ISP_SWIZ_CTIO(isp, outp, ap);
+		break;
+	case RQSTYPE_CTIO2:
+		ISP_SWIZ_CTIO2(isp, outp, ap);
+		break;
+	default:
+		PRINTF("%s: Unknown type 0x%x in isp_put_entry\n",
+		    isp->isp_name, etype);
+		return (-1);
+	}
+
+	ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap);;
+
+	ISP_ADD_REQUEST(isp, iptr);
+	return (0);
+}
+
+int
+isp_target_put_atio(isp, iid, tgt, lun, ttype, tval)
+	struct ispsoftc *isp;
+	int iid;
+	int tgt;
+	int lun;
+	int ttype;
+	int tval;
+{
+	union {
+		at_entry_t _atio;
+		at2_entry_t _atio2;
+	} atun;
+
+	MEMZERO(&atun, sizeof atun);
+	if (IS_FC(isp)) {
+		atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2;
+		atun._atio2.at_header.rqs_entry_count = 1;
+#ifdef ISP2100_SCCLUN
+		atun._atio2.at_scclun = (uint16_t) lun;
+#else
+		atun._atio2.at_lun = (uint8_t) lun;
+#endif
+		atun._atio2.at_status = CT_OK;
+	} else {
+		atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO;
+		atun._atio.at_header.rqs_entry_count = 1;
+		atun._atio.at_iid = iid;
+		atun._atio.at_tgt = tgt;
+		atun._atio.at_lun = lun;
+		atun._atio.at_tag_type = ttype;
+		atun._atio.at_tag_val = tval;
+		atun._atio.at_status = CT_OK;
+	}
+	return (isp_target_put_entry(isp, &atun));
+}
+
+/*
+ * Command completion- both for handling cases of no resources or
+ * no blackhole driver, or other cases where we have to, inline,
+ * finish the command sanely, or for normal command completion.
+ *
+ * The 'completion' code value has the scsi status byte in the low 8 bits.
+ * If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have
+ * the sense key and  bits 16..23 have the ASCQ and bits 24..31 have the ASC
+ * values.
+ *
+ * NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't
+ * NB: inline SCSI sense reporting.
+ *
+ * For both parallel && fibre channel, we use the feature that does
+ * an automatic resource autoreplenish so we don't have then later do
+ * put of an atio to replenish the f/w's resource count.
+ */
+
+int
+isp_endcmd(struct ispsoftc *isp, void *arg, u_int32_t code, u_int32_t hdl)
+{
+	int sts;
+	union {
+		ct_entry_t _ctio;
+		ct2_entry_t _ctio2;
+	} un;
+
+	MEMZERO(&un, sizeof un);
+	sts = code & 0xff;
+
+	if (IS_FC(isp)) {
+		at2_entry_t *aep = arg;
+		ct2_entry_t *cto = &un._ctio2;
+
+		cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
+		cto->ct_header.rqs_entry_count = 1;
+		cto->ct_iid = aep->at_iid;
+#ifndef	ISP2100_SCCLUN
+		cto->ct_lun = aep->at_lun;
+#endif
+		cto->ct_rxid = aep->at_rxid;
+		cto->rsp.m1.ct_scsi_status = sts & 0xff;
+		cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1;
+		if (hdl == 0) {
+			cto->ct_flags |= CT2_CCINCR;
+		}
+		if (aep->at_datalen) {
+			cto->ct_resid = aep->at_datalen;
+			cto->ct_flags |= CT2_DATA_UNDER;
+		}
+		if ((sts & 0xff) == SCSI_CHECK && (sts & ECMD_SVALID)) {
+			cto->rsp.m1.ct_resp[0] = 0xf0;
+			cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
+			cto->rsp.m1.ct_resp[7] = 8;
+			cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
+			cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
+			cto->rsp.m1.ct_senselen = 16;
+			cto->ct_flags |= CT2_SNSLEN_VALID;
+		}
+		cto->ct_reserved = hdl;
+	} else {
+		at_entry_t *aep = arg;
+		ct_entry_t *cto = &un._ctio;
+
+		cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
+		cto->ct_header.rqs_entry_count = 1;
+		cto->ct_iid = aep->at_iid;
+		cto->ct_tgt = aep->at_tgt;
+		cto->ct_lun = aep->at_lun;
+		cto->ct_tag_type = aep->at_tag_type;
+		cto->ct_tag_val = aep->at_tag_val;
+		cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA;
+		if (hdl == 0) {
+			cto->ct_flags |= CT_CCINCR;
+		}
+		cto->ct_scsi_status = sts;
+		cto->ct_reserved = hdl;
+	}
+	return (isp_target_put_entry(isp, &un));
+}
+
+void
+isp_target_async(isp, bus, event)
+	struct ispsoftc *isp;
+	int bus;
+	int event;
+{
+	tmd_event_t evt;
+	tmd_msg_t msg;
+
+	switch (event) {
+	/*
+	 * These three we handle here to propagate an effective bus reset
+	 * upstream, but these do not require any immediate notify actions
+	 * so we return when done.
+	 */
+	case ASYNC_LIP_OCCURRED:
+	case ASYNC_LOOP_UP:
+	case ASYNC_LOOP_DOWN:
+		evt.ev_bus = bus;
+		evt.ev_event = event;
+		(void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt);
+		return;
+
+	case ASYNC_LOOP_RESET:
+	case ASYNC_BUS_RESET:
+	case ASYNC_TIMEOUT_RESET:
+		if (IS_FC(isp)) {
+			return;	/* we'll be getting an inotify instead */
+		}
+		evt.ev_bus = bus;
+		evt.ev_event = event;
+		(void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt);
+		break;
+	case ASYNC_DEVICE_RESET:
+		/*
+		 * Bus Device Reset resets a specific target, so
+		 * we pass this as a synthesized message.
+		 */
+		MEMZERO(&msg, sizeof msg);
+		if (IS_FC(isp)) {
+			msg.nt_iid =
+			    ((fcparam *)isp->isp_param)->isp_loopid;
+		} else {
+			msg.nt_iid =
+			    ((sdparam *)isp->isp_param)->isp_initiator_id;
+		}
+		msg.nt_bus = bus;
+		msg.nt_msg[0] = MSG_BUS_DEV_RESET;
+		(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
+		break;
+	default:
+		PRINTF("%s: isp_target_async: unknown event 0x%x\n",
+		    isp->isp_name, event);
+		break;
+	}
+	isp_notify_ack(isp, NULL);
+}
+
+
+/*
+ * Process a received message.
+ * The ISP firmware can handle most messages, there are only
+ * a few that we need to deal with:
+ * - abort: clean up the current command
+ * - abort tag and clear queue
+ */
+
+static void
+isp_got_msg(isp, bus, inp)
+	struct ispsoftc *isp;
+	int bus;
+	in_entry_t *inp;
+{
+	u_int8_t status = inp->in_status & ~QLTM_SVALID;
+
+	if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) {
+		tmd_msg_t msg;
+
+		MEMZERO(&msg, sizeof (msg));
+		msg.nt_bus = bus;
+		msg.nt_iid = inp->in_iid;
+		msg.nt_tgt = inp->in_tgt;
+		msg.nt_lun = inp->in_lun;
+		msg.nt_tagtype = inp->in_tag_type;
+		msg.nt_tagval = inp->in_tag_val;
+		MEMCPY(msg.nt_msg, inp->in_msg, IN_MSGLEN);
+		(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
+	} else {
+		PRINTF("%s: unknown immediate notify status 0x%x\n",
+		    isp->isp_name, inp->in_status);
+	}
+}
+
+/*
+ * Synthesize a message from the task management flags in a FCP_CMND_IU.
+ */
+static void
+isp_got_msg_fc(isp, bus, inp)
+	struct ispsoftc *isp;
+	int bus;
+	in_fcentry_t *inp;
+{
+	static char *f1 = "%s: %s from iid %d lun %d seq 0x%x\n";
+	static char *f2 = 
+	    "%s: unknown %s 0x%x lun %d iid %d task flags 0x%x seq 0x%x\n";
+
+	if (inp->in_status != IN_MSG_RECEIVED) {
+		PRINTF(f2, isp->isp_name, "immediate notify status",
+		    inp->in_status, inp->in_lun, inp->in_iid,
+		    inp->in_task_flags,  inp->in_seqid);
+	} else {
+		tmd_msg_t msg;
+
+		MEMZERO(&msg, sizeof (msg));
+		msg.nt_bus = bus;
+		msg.nt_iid = inp->in_iid;
+#ifdef	ISP2100_SCCLUN
+		msg.nt_lun = inp->in_scclun;
+#else
+		msg.nt_lun = inp->in_lun;
+#endif
+		msg.nt_tagval = inp->in_seqid;
+
+		if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK) {
+			PRINTF(f1, isp->isp_name, "ABORT TASK",
+			    inp->in_iid, inp->in_lun, inp->in_seqid);
+			msg.nt_msg[0] = MSG_ABORT_TAG;
+		} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) {
+			PRINTF(f1, isp->isp_name, "CLEAR TASK SET",
+			    inp->in_iid, inp->in_lun, inp->in_seqid);
+			msg.nt_msg[0] = MSG_CLEAR_QUEUE;
+		} else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) {
+			PRINTF(f1, isp->isp_name, "TARGET RESET",
+			    inp->in_iid, inp->in_lun, inp->in_seqid);
+			msg.nt_msg[0] = MSG_BUS_DEV_RESET;
+		} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) {
+			PRINTF(f1, isp->isp_name, "CLEAR ACA",
+			    inp->in_iid, inp->in_lun, inp->in_seqid);
+			/* ???? */
+			msg.nt_msg[0] = MSG_REL_RECOVERY;
+		} else if (inp->in_task_flags & TASK_FLAGS_TERMINATE_TASK) {
+			PRINTF(f1, isp->isp_name, "TERMINATE TASK",
+			    inp->in_iid, inp->in_lun, inp->in_seqid);
+			msg.nt_msg[0] = MSG_TERM_IO_PROC;
+		} else {
+			PRINTF(f2, isp->isp_name, "task flag",
+			    inp->in_status, inp->in_lun, inp->in_iid,
+			    inp->in_task_flags,  inp->in_seqid);
+		}
+		if (msg.nt_msg[0]) {
+			(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
+		}
+	}
+}
+
+static void
+isp_notify_ack(isp, arg)
+	struct ispsoftc *isp;
+	void *arg;
+{
+	char storage[QENTRY_LEN];
+	u_int16_t iptr, optr;
+	void *outp;
+
+	if (isp_getrqentry(isp, &iptr, &optr, &outp)) {
+		PRINTF("%s: Request Queue Overflow For isp_notify_ack\n",
+		    isp->isp_name);
+		return;
+	}
+
+	MEMZERO(storage, QENTRY_LEN);
+
+	if (IS_FC(isp)) {
+		na_fcentry_t *na = (na_fcentry_t *) storage;
+		if (arg) {
+			in_fcentry_t *inp = arg;
+			MEMCPY(storage, arg, sizeof (isphdr_t));
+			na->na_iid = inp->in_iid;
+#ifdef	ISP2100_SCCLUN
+			na->na_lun = inp->in_scclun;
+#else
+			na->na_lun = inp->in_lun;
+#endif
+			na->na_task_flags = inp->in_task_flags;
+			na->na_seqid = inp->in_seqid;
+			na->na_flags = NAFC_RCOUNT;
+			if (inp->in_status == IN_RESET) {
+				na->na_flags |= NAFC_RST_CLRD;
+			}
+		} else {
+			na->na_flags = NAFC_RST_CLRD;
+		}
+		ISP_SWIZ_NOT_ACK_FC(isp, outp, na);
+	} else {
+		na_entry_t *na = (na_entry_t *) storage;
+		if (arg) {
+			in_entry_t *inp = arg;
+			MEMCPY(storage, arg, sizeof (isphdr_t));
+			na->na_iid = inp->in_iid;
+			na->na_lun = inp->in_lun;
+			na->na_tgt = inp->in_tgt;
+			na->na_seqid = inp->in_seqid;
+			if (inp->in_status == IN_RESET) {
+				na->na_flags = NA_RST_CLRD;
+			}
+		} else {
+			na->na_flags = NA_RST_CLRD;
+		}
+		ISP_SWIZ_NOT_ACK(isp, outp, na);
+	}
+	ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage);
+	ISP_ADD_REQUEST(isp, iptr);
+}
+
+static void
+isp_handle_atio(isp, aep)
+	struct ispsoftc *isp;
+	at_entry_t *aep;
+{
+	int lun;
+	lun = aep->at_lun;
+	/*
+	 * The firmware status (except for the QLTM_SVALID bit) indicates
+	 * why this ATIO was sent to us.
+	 *
+	 * If QLTM_SVALID is set, the firware has recommended Sense Data.
+	 *
+	 * If the DISCONNECTS DISABLED bit is set in the flags field,
+	 * we're still connected on the SCSI bus - i.e. the initiator
+	 * did not set DiscPriv in the identify message. We don't care
+	 * about this so it's ignored.
+	 */
+
+	switch(aep->at_status & ~QLTM_SVALID) {
+	case AT_PATH_INVALID:
+		/*
+		 * ATIO rejected by the firmware due to disabled lun.
+		 */
+		PRINTF("%s: rejected ATIO for disabled lun %d\n",
+		    isp->isp_name, lun);
+		break;
+	case AT_NOCAP:
+		/*
+		 * Requested Capability not available
+		 * We sent an ATIO that overflowed the firmware's
+		 * command resource count.
+		 */
+		PRINTF("%s: rejected ATIO for lun %d because of command count"
+		    " overflow\n", isp->isp_name, lun);
+		break;
+
+	case AT_BDR_MSG:
+		/*
+		 * If we send an ATIO to the firmware to increment
+		 * its command resource count, and the firmware is
+		 * recovering from a Bus Device Reset, it returns
+		 * the ATIO with this status. We set the command
+		 * resource count in the Enable Lun entry and no
+		 * not increment it. Therefore we should never get
+		 * this status here.
+		 */
+		PRINTF("%s: ATIO returned for lun %d because it was in the "
+		    " middle of coping with a Bus Device Reset\n",
+		    isp->isp_name, lun);
+		break;
+
+	case AT_CDB:		/* Got a CDB */
+	case AT_PHASE_ERROR:	/* Bus Phase Sequence Error */
+		/*
+		 * Punt to platform specific layer.
+		 */
+		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
+		break;
+
+	case AT_RESET:
+		/*
+		 * A bus reset came along an blew away this command. Why
+		 * they do this in addition the async event code stuff,
+		 * I dunno.
+		 *
+		 * Ignore it because the async event will clear things
+		 * up for us.
+		 */
+		PRINTF("%s: ATIO returned for lun %d from initiator %d because"
+		    " a Bus Reset occurred\n", isp->isp_name, lun,
+		    aep->at_iid);
+		break;
+
+
+	default:
+		PRINTF("%s: Unknown ATIO status 0x%x from initiator %d for lun"
+		    " %d\n", isp->isp_name, aep->at_status, aep->at_iid, lun);
+		(void) isp_target_put_atio(isp, aep->at_iid, aep->at_tgt,
+		    lun, aep->at_tag_type, aep->at_tag_val);
+		break;
+	}
+}
+
+static void
+isp_handle_atio2(isp, aep)
+	struct ispsoftc *isp;
+	at2_entry_t *aep;
+{
+	int lun;
+#ifdef	ISP2100_SCCLUN
+	lun = aep->at_scclun;
+#else
+	lun = aep->at_lun;
+#endif
+	/*
+	 * The firmware status (except for the QLTM_SVALID bit) indicates
+	 * why this ATIO was sent to us.
+	 *
+	 * If QLTM_SVALID is set, the firware has recommended Sense Data.
+	 *
+	 * If the DISCONNECTS DISABLED bit is set in the flags field,
+	 * we're still connected on the SCSI bus - i.e. the initiator
+	 * did not set DiscPriv in the identify message. We don't care
+	 * about this so it's ignored.
+	 */
+
+	switch(aep->at_status & ~QLTM_SVALID) {
+	case AT_PATH_INVALID:
+		/*
+		 * ATIO rejected by the firmware due to disabled lun.
+		 */
+		PRINTF("%s: rejected ATIO2 for disabled lun %d\n",
+		    isp->isp_name, lun);
+		break;
+	case AT_NOCAP:
+		/*
+		 * Requested Capability not available
+		 * We sent an ATIO that overflowed the firmware's
+		 * command resource count.
+		 */
+		PRINTF("%s: rejected ATIO2 for lun %d because of command count"
+		    " overflow\n", isp->isp_name, lun);
+		break;
+
+	case AT_BDR_MSG:
+		/*
+		 * If we send an ATIO to the firmware to increment
+		 * its command resource count, and the firmware is
+		 * recovering from a Bus Device Reset, it returns
+		 * the ATIO with this status. We set the command
+		 * resource count in the Enable Lun entry and no
+		 * not increment it. Therefore we should never get
+		 * this status here.
+		 */
+		PRINTF("%s: ATIO2 returned for lun %d because it was in the "
+		    " middle of coping with a Bus Device Reset\n",
+		    isp->isp_name, lun);
+		break;
+
+	case AT_CDB:		/* Got a CDB */
+		/*
+		 * Punt to platform specific layer.
+		 */
+		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
+		break;
+
+	case AT_RESET:
+		/*
+		 * A bus reset came along an blew away this command. Why
+		 * they do this in addition the async event code stuff,
+		 * I dunno.
+		 *
+		 * Ignore it because the async event will clear things
+		 * up for us.
+		 */
+		PRINTF("%s: ATIO2 returned for lun %d from initiator %d because"
+		    " a Bus Reset occurred\n", isp->isp_name, lun,
+		    aep->at_iid);
+		break;
+
+
+	default:
+		PRINTF("%s: Unknown ATIO2 status 0x%x from initiator %d for lun"
+		    " %d\n", isp->isp_name, aep->at_status, aep->at_iid, lun);
+		(void) isp_target_put_atio(isp, aep->at_iid, 0, lun, 0, 0);
+		break;
+	}
+}
+
+static void
+isp_handle_ctio(isp, ct)
+	struct ispsoftc *isp;
+	ct_entry_t *ct;
+{
+	ISP_SCSI_XFER_T *xs;
+	int pl = 0;
+	char *fmsg = NULL;
+
+	if (ct->ct_reserved) {
+		xs = isp_find_xs(isp, ct->ct_reserved);
+		if (xs == NULL)
+			pl = 0;
+	} else {
+		pl = 2;
+		xs = NULL;
+	}
+
+	switch(ct->ct_status & ~QLTM_SVALID) {
+	case CT_OK:
+		/*
+		 * There are generally 3 possibilities as to why we'd get
+		 * this condition:
+		 * 	We disconnected after receiving a CDB.
+		 * 	We sent or received data.
+		 * 	We sent status & command complete.
+		 */
+
+		if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) {
+			/*
+			 * Nothing to do in this case.
+			 */
+			IDPRINTF(pl, ("%s: CTIO- initiator disconnected OK\n",
+			    isp->isp_name));
+			return;
+		}
+		break;
+
+	case CT_BDR_MSG:
+		/*
+		 * Bus Device Reset message received or the SCSI Bus has
+		 * been Reset; the firmware has gone to Bus Free.
+		 *
+		 * The firmware generates an async mailbox interupt to
+		 * notify us of this and returns outstanding CTIOs with this
+		 * status. These CTIOs are handled in that same way as
+		 * CT_ABORTED ones, so just fall through here.
+		 */
+		fmsg = "Bus Device Reset";
+		/*FALLTHROUGH*/
+	case CT_RESET:
+		if (fmsg == NULL)
+			fmsg = "Bus Reset";
+		/*FALLTHROUGH*/
+	case CT_ABORTED:
+		/*
+		 * When an Abort message is received the firmware goes to
+		 * Bus Free and returns all outstanding CTIOs with the status
+		 * set, then sends us an Immediate Notify entry.
+		 */
+		if (fmsg == NULL)
+			fmsg = "ABORT TASK sent by Initiator";
+
+		PRINTF("%s: CTIO destroyed by %s\n", isp->isp_name, fmsg);
+		break;
+
+	case CT_INVAL:
+		/*
+		 * CTIO rejected by the firmware due to disabled lun.
+		 * "Cannot Happen".
+		 */
+		PRINTF("%s: Firmware rejected CTIO for disabled lun %d\n",
+		    isp->isp_name, ct->ct_lun);
+		break;
+
+	case CT_NOPATH:
+		/*
+		 * CTIO rejected by the firmware due "no path for the
+		 * nondisconnecting nexus specified". This means that
+		 * we tried to access the bus while a non-disconnecting
+		 * command is in process.
+		 */
+		PRINTF("%s: Firmware rejected CTIO for bad nexus %d/%d/%d\n",
+		    isp->isp_name, ct->ct_iid, ct->ct_tgt, ct->ct_lun);
+		break;
+
+	case CT_RSELTMO:
+		fmsg = "Reselection";
+		/*FALLTHROUGH*/
+	case CT_TIMEOUT:
+		if (fmsg == NULL)
+			fmsg = "Command";
+		PRINTF("%s: Firmware timed out on %s\n", isp->isp_name, fmsg);
+		break;
+
+	case CT_ERR:
+		fmsg = "Completed with Error";
+		/*FALLTHROUGH*/
+	case CT_PHASE_ERROR:
+		if (fmsg == NULL)
+			fmsg = "Phase Sequence Error";
+		/*FALLTHROUGH*/
+	case CT_TERMINATED:
+		if (fmsg == NULL)
+			fmsg = "terminated by TERMINATE TRANSFER";
+		/*FALLTHROUGH*/
+	case CT_NOACK:
+		if (fmsg == NULL)
+			fmsg = "unacknowledged Immediate Notify pending";
+
+		PRINTF("%s: CTIO returned by f/w- %s\n", isp->isp_name, fmsg);
+#if	0
+			if (status & SENSEVALID) {
+				bcopy((caddr_t) (cep + CTIO_SENSE_OFFSET),
+				    (caddr_t) &cdp->cd_sensedata,
+				    sizeof(scsi_sense_t));
+				cdp->cd_flags |= CDF_SENSEVALID;
+			}
+#endif
+		break;
+	default:
+		PRINTF("%s: Unknown CTIO status 0x%x\n", isp->isp_name,
+		    ct->ct_status & ~QLTM_SVALID);
+		break;
+	}
+
+	if (xs == NULL) {
+		/*
+		 * There may be more than one CTIO for a data transfer,
+		 * or this may be a status CTIO we're not monitoring.
+		 *
+		 * The assumption is that they'll all be returned in the
+		 * order we got them.
+		 */
+		if (ct->ct_reserved == 0) {
+			if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
+				IDPRINTF(pl,
+				    ("%s: intermediate CTIO completed ok\n",
+				    isp->isp_name));
+			} else {
+				IDPRINTF(pl,
+				    ("%s: unmonitored CTIO completed ok\n",
+				    isp->isp_name));
+			}
+		} else {
+			IDPRINTF(pl,
+			    ("%s: NO xs for CTIO (handle 0x%x) status 0x%x\n",
+			    isp->isp_name, ct->ct_reserved,
+			    ct->ct_status & ~QLTM_SVALID));
+		}
+	} else {
+		if (ct->ct_flags & CT_SENDSTATUS) {
+			/*
+			 * Sent status and command complete.
+			 *
+			 * We're now really done with this command, so we
+			 * punt to the platform dependent layers because
+			 * only there can we do the appropriate command
+			 * complete thread synchronization.
+			 */
+			IDPRINTF(pl,
+			    ("%s: status CTIO complete\n", isp->isp_name));
+		} else {
+			/*
+			 * Final CTIO completed. Release DMA resources and
+			 * notify platform dependent layers.
+			 */
+			IDPRINTF(pl,
+			    ("%s: data CTIO complete\n", isp->isp_name));
+			ISP_DMAFREE(isp, xs, ct->ct_reserved);
+		}
+		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
+		/*
+		 * The platform layer will destroy the handle if appropriate.
+		 */
+	}
+}
+
+static void
+isp_handle_ctio2(isp, ct)
+	struct ispsoftc *isp;
+	ct2_entry_t *ct;
+{
+	ISP_SCSI_XFER_T *xs;
+	int pl = 3;
+	char *fmsg = NULL;
+
+	if (ct->ct_reserved) {
+		xs = isp_find_xs(isp, ct->ct_reserved);
+		if (xs == NULL)
+			pl = 0;
+	} else {
+		pl = 2;
+		xs = NULL;
+	}
+
+	switch(ct->ct_status & ~QLTM_SVALID) {
+	case CT_OK:
+		/*
+		 * There are generally 2 possibilities as to why we'd get
+		 * this condition:
+		 * 	We sent or received data.
+		 * 	We sent status & command complete.
+		 */
+
+		break;
+
+	case CT_BDR_MSG:
+		/*
+		 * Bus Device Reset message received or the SCSI Bus has
+		 * been Reset; the firmware has gone to Bus Free.
+		 *
+		 * The firmware generates an async mailbox interupt to
+		 * notify us of this and returns outstanding CTIOs with this
+		 * status. These CTIOs are handled in that same way as
+		 * CT_ABORTED ones, so just fall through here.
+		 */
+		fmsg = "Bus Device Reset";
+		/*FALLTHROUGH*/
+	case CT_RESET:
+		if (fmsg == NULL)
+			fmsg = "Bus Reset";
+		/*FALLTHROUGH*/
+	case CT_ABORTED:
+		/*
+		 * When an Abort message is received the firmware goes to
+		 * Bus Free and returns all outstanding CTIOs with the status
+		 * set, then sends us an Immediate Notify entry.
+		 */
+		if (fmsg == NULL)
+			fmsg = "ABORT TASK sent by Initiator";
+
+		PRINTF("%s: CTIO2 destroyed by %s\n", isp->isp_name, fmsg);
+		break;
+
+	case CT_INVAL:
+		/*
+		 * CTIO rejected by the firmware - invalid data direction.
+		 */
+		PRINTF("%s: CTIO2 had wrong data directiond\n", isp->isp_name);
+		break;
+
+	case CT_NOPATH:
+		/*
+		 * CTIO rejected by the firmware due "no path for the
+		 * nondisconnecting nexus specified". This means that
+		 * we tried to access the bus while a non-disconnecting
+		 * command is in process.
+		 */
+		PRINTF("%s: Firmware rejected CTIO2 for bad nexus %d->%d\n",
+		    isp->isp_name, ct->ct_iid, ct->ct_lun);
+		break;
+
+	case CT_RSELTMO:
+		fmsg = "Reselection";
+		/*FALLTHROUGH*/
+	case CT_TIMEOUT:
+		if (fmsg == NULL)
+			fmsg = "Command";
+		PRINTF("%s: Firmware timed out on %s\n", isp->isp_name, fmsg);
+		break;
+
+	case CT_ERR:
+		fmsg = "Completed with Error";
+		/*FALLTHROUGH*/
+	case CT_PHASE_ERROR:	/* Bus phase sequence error */
+		if (fmsg == NULL)
+			fmsg = "Phase Sequence Error";
+		/*FALLTHROUGH*/
+	case CT_TERMINATED:
+		if (fmsg == NULL)
+			fmsg = "terminated by TERMINATE TRANSFER";
+		/*FALLTHROUGH*/
+	case CT_LOGOUT:
+		if (fmsg == NULL)
+			fmsg = "Port Logout";
+		/*FALLTHROUGH*/
+	case CT_PORTNOTAVAIL:
+		if (fmsg == NULL)
+			fmsg = "Port not available";
+	case CT_NOACK:
+		if (fmsg == NULL)
+			fmsg = "unacknowledged Immediate Notify pending";
+
+		PRINTF("%s: CTIO returned by f/w- %s\n", isp->isp_name, fmsg);
+#if	0
+			if (status & SENSEVALID) {
+				bcopy((caddr_t) (cep + CTIO_SENSE_OFFSET),
+				    (caddr_t) &cdp->cd_sensedata,
+				    sizeof(scsi_sense_t));
+				cdp->cd_flags |= CDF_SENSEVALID;
+			}
+#endif
+		break;
+
+	case CT_INVRXID:
+		/*
+		 * CTIO rejected by the firmware because an invalid RX_ID.
+		 * Just print a message.
+		 */
+		PRINTF("%s: CTIO2 completed with Invalid RX_ID 0x%x\n",
+		    isp->isp_name, ct->ct_rxid);
+		break;
+
+	default:
+		IDPRINTF(pl, ("%s: Unknown CTIO status 0x%x\n", isp->isp_name,
+		    ct->ct_status & ~QLTM_SVALID));
+		break;
+	}
+
+	if (xs == NULL) {
+		/*
+		 * There may be more than one CTIO for a data transfer,
+		 * or this may be a status CTIO we're not monitoring.
+		 *
+		 * The assumption is that they'll all be returned in the
+		 * order we got them.
+		 */
+		if (ct->ct_reserved == 0) {
+			if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
+				IDPRINTF(pl,
+				    ("%s: intermediate CTIO completed ok\n",
+				    isp->isp_name));
+			} else {
+				IDPRINTF(pl,
+				    ("%s: unmonitored CTIO completed ok\n",
+				    isp->isp_name));
+			}
+		} else {
+			IDPRINTF(pl,
+			    ("%s: NO xs for CTIO (handle 0x%x) status 0x%x\n",
+			    isp->isp_name, ct->ct_reserved,
+			    ct->ct_status & ~QLTM_SVALID));
+		}
+	} else {
+		if (ct->ct_flags & CT_SENDSTATUS) {
+			/*
+			 * Sent status and command complete.
+			 *
+			 * We're now really done with this command, so we
+			 * punt to the platform dependent layers because
+			 * only there can we do the appropriate command
+			 * complete thread synchronization.
+			 */
+			IDPRINTF(pl,
+			    ("%s: status CTIO complete\n", isp->isp_name));
+		} else {
+			/*
+			 * Final CTIO completed. Release DMA resources and
+			 * notify platform dependent layers.
+			 */
+			IDPRINTF(pl,
+			    ("%s: data CTIO complete\n", isp->isp_name));
+			ISP_DMAFREE(isp, xs, ct->ct_reserved);
+		}
+		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
+		/*
+		 * The platform layer will destroy the handle if appropriate.
+		 */
+	}
+}
+#endif